alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Vinod Koul <vinod.koul@intel.com>
To: alsa-devel@alsa-project.org
Cc: patches.audio@intel.com, liam.r.girdwood@linux.intel.com,
	Vinod Koul <vinod.koul@intel.com>,
	broonie@kernel.org, Jeeja KP <jeeja.kp@intel.com>,
	"Subhransu S. Prusty" <subhransu.s.prusty@intel.com>
Subject: [PATCH v2 6/9] ASoC: Intel: Skylake: Initialize and load DSP controls
Date: Mon, 17 Aug 2015 22:56:41 +0530	[thread overview]
Message-ID: <1439832404-12424-7-git-send-email-vinod.koul@intel.com> (raw)
In-Reply-To: <1439832404-12424-1-git-send-email-vinod.koul@intel.com>

From: Jeeja KP <jeeja.kp@intel.com>

Initialize and creates DSP controls if processing pipe capability
is supported by HW. Updates the dma_id, hw_params to module param
to be used when DSP module has to be configured.

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 sound/soc/intel/skylake/skl-pcm.c | 138 ++++++++++++++++++++++++++++++--------
 1 file changed, 111 insertions(+), 27 deletions(-)

diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c
index 7d617bf493bc..3e491149bf0c 100644
--- a/sound/soc/intel/skylake/skl-pcm.c
+++ b/sound/soc/intel/skylake/skl-pcm.c
@@ -24,6 +24,7 @@
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
 #include "skl.h"
+#include "skl-topology.h"
 
 #define HDA_MONO 1
 #define HDA_STEREO 2
@@ -214,6 +215,7 @@ static int skl_pcm_hw_params(struct snd_pcm_substream *substream,
 	struct hdac_ext_bus *ebus = dev_get_drvdata(dai->dev);
 	struct hdac_ext_stream *stream = get_hdac_ext_stream(substream);
 	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct skl_pipe_params p_params = {0};
 	int ret, dma_id;
 
 	dev_dbg(dai->dev, "%s: %s\n", __func__, dai->name);
@@ -228,6 +230,13 @@ static int skl_pcm_hw_params(struct snd_pcm_substream *substream,
 	dma_id = hdac_stream(stream)->stream_tag - 1;
 	dev_dbg(dai->dev, "dma_id=%d\n", dma_id);
 
+	p_params.s_fmt = snd_pcm_format_width(params_format(params));
+	p_params.ch = params_channels(params);
+	p_params.s_freq = params_rate(params);
+	p_params.host_dma_id = dma_id;
+	p_params.stream = substream->stream;
+	skl_tplg_fe_update_params(dai, &p_params);
+
 	return 0;
 }
 
@@ -268,6 +277,46 @@ static int skl_pcm_hw_free(struct snd_pcm_substream *substream,
 	return skl_substream_free_pages(ebus_to_hbus(ebus), substream);
 }
 
+static int skl_be_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params,
+				struct snd_soc_dai *dai)
+{
+	struct skl_pipe_params p_params = {0};
+
+	dev_dbg(dai->dev, "%s: %s\n", __func__, dai->name);
+
+	p_params.s_fmt = snd_pcm_format_width(params_format(params));
+	p_params.ch = params_channels(params);
+	p_params.s_freq = params_rate(params);
+	p_params.stream = substream->stream;
+	skl_tplg_be_update_params(dai, &p_params);
+
+	return 0;
+}
+
+static int skl_pcm_trigger(struct snd_pcm_substream *substream, int cmd,
+		struct snd_soc_dai *dai)
+{
+	dev_dbg(dai->dev, "In %s cmd=%d\n", __func__, cmd);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+	case SNDRV_PCM_TRIGGER_RESUME:
+		return skl_tplg_set_fe_pipeline_state(dai, true,
+							substream->stream);
+
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+		return skl_tplg_set_fe_pipeline_state(dai, false,
+							substream->stream);
+
+	default:
+		return 0;
+	}
+
+	return 0;
+}
+
 static int skl_link_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params,
 				struct snd_soc_dai *dai)
@@ -277,9 +326,10 @@ static int skl_link_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
 	struct skl_dma_params *dma_params;
 	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	int dma_id;
+	struct skl_pipe_params p_params = {0};
+
+	dev_dbg(dai->dev, "%s: %s\n", __func__, dai->name);
 
-	pr_debug("%s\n", __func__);
 	link_dev = snd_hdac_ext_stream_assign(ebus, substream,
 					HDAC_EXT_STREAM_TYPE_LINK);
 	if (!link_dev)
@@ -293,7 +343,14 @@ static int skl_link_hw_params(struct snd_pcm_substream *substream,
 	if (dma_params)
 		dma_params->stream_tag =  hdac_stream(link_dev)->stream_tag;
 	snd_soc_dai_set_dma_data(codec_dai, substream, (void *)dma_params);
-	dma_id = hdac_stream(link_dev)->stream_tag - 1;
+
+	p_params.s_fmt = snd_pcm_format_width(params_format(params));
+	p_params.ch = params_channels(params);
+	p_params.s_freq = params_rate(params);
+	p_params.stream = substream->stream;
+	p_params.link_dma_id = hdac_stream(link_dev)->stream_tag - 1;
+
+	skl_tplg_be_update_params(dai, &p_params);
 
 	return 0;
 }
@@ -308,8 +365,6 @@ static int skl_link_pcm_prepare(struct snd_pcm_substream *substream,
 	unsigned int format_val = 0;
 	struct skl_dma_params *dma_params;
 	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_pcm_hw_params *params;
-	struct snd_interval *channels, *rate;
 	struct hdac_ext_link *link;
 
 	dev_dbg(dai->dev, "%s: %s\n", __func__, dai->name);
@@ -317,18 +372,6 @@ static int skl_link_pcm_prepare(struct snd_pcm_substream *substream,
 		dev_dbg(dai->dev, "already stream is prepared - returning\n");
 		return 0;
 	}
-	params  = devm_kzalloc(dai->dev, sizeof(*params), GFP_KERNEL);
-	if (params == NULL)
-		return -ENOMEM;
-
-	channels = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS);
-	channels->min = channels->max = substream->runtime->channels;
-	rate = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE);
-	rate->min = rate->max = substream->runtime->rate;
-	snd_mask_set(&params->masks[SNDRV_PCM_HW_PARAM_FORMAT -
-					SNDRV_PCM_HW_PARAM_FIRST_MASK],
-					substream->runtime->format);
-
 
 	dma_params  = (struct skl_dma_params *)
 			snd_soc_dai_get_dma_data(codec_dai, substream);
@@ -399,13 +442,13 @@ static int skl_link_hw_free(struct snd_pcm_substream *substream,
 	return 0;
 }
 
-static int skl_hda_be_startup(struct snd_pcm_substream *substream,
+static int skl_be_startup(struct snd_pcm_substream *substream,
 		struct snd_soc_dai *dai)
 {
 	return pm_runtime_get_sync(dai->dev);
 }
 
-static void skl_hda_be_shutdown(struct snd_pcm_substream *substream,
+static void skl_be_shutdown(struct snd_pcm_substream *substream,
 		struct snd_soc_dai *dai)
 {
 	pm_runtime_mark_last_busy(dai->dev);
@@ -418,20 +461,28 @@ static struct snd_soc_dai_ops skl_pcm_dai_ops = {
 	.prepare = skl_pcm_prepare,
 	.hw_params = skl_pcm_hw_params,
 	.hw_free = skl_pcm_hw_free,
+	.trigger = skl_pcm_trigger,
 };
 
 static struct snd_soc_dai_ops skl_dmic_dai_ops = {
-	.startup = skl_hda_be_startup,
-	.shutdown = skl_hda_be_shutdown,
+	.startup = skl_be_startup,
+	.hw_params = skl_be_hw_params,
+	.shutdown = skl_be_shutdown,
+};
+
+static struct snd_soc_dai_ops skl_be_ssp_dai_ops = {
+	.startup = skl_be_startup,
+	.hw_params = skl_be_hw_params,
+	.shutdown = skl_be_shutdown,
 };
 
 static struct snd_soc_dai_ops skl_link_dai_ops = {
-	.startup = skl_hda_be_startup,
+	.startup = skl_be_startup,
 	.prepare = skl_link_pcm_prepare,
 	.hw_params = skl_link_hw_params,
 	.hw_free = skl_link_hw_free,
 	.trigger = skl_link_pcm_trigger,
-	.shutdown = skl_hda_be_shutdown,
+	.shutdown = skl_be_shutdown,
 };
 
 static struct snd_soc_dai_driver skl_platform_dai[] = {
@@ -488,6 +539,24 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
 },
 /* BE CPU  Dais */
 {
+	.name = "SSP0 Pin",
+	.ops = &skl_be_ssp_dai_ops,
+	.playback = {
+		.stream_name = "ssp0 Tx",
+		.channels_min = HDA_STEREO,
+		.channels_max = HDA_STEREO,
+		.rates = SNDRV_PCM_RATE_48000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	},
+	.capture = {
+		.stream_name = "ssp0 Rx",
+		.channels_min = HDA_STEREO,
+		.channels_max = HDA_STEREO,
+		.rates = SNDRV_PCM_RATE_48000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	},
+},
+{
 	.name = "iDisp Pin",
 	.ops = &skl_link_dai_ops,
 	.playback = {
@@ -577,7 +646,7 @@ static int skl_platform_open(struct snd_pcm_substream *substream)
 	return 0;
 }
 
-static int skl_pcm_trigger(struct snd_pcm_substream *substream,
+static int skl_coupled_trigger(struct snd_pcm_substream *substream,
 					int cmd)
 {
 	struct hdac_ext_bus *ebus = get_bus_ctx(substream);
@@ -651,7 +720,7 @@ static int skl_pcm_trigger(struct snd_pcm_substream *substream,
 	return 0;
 }
 
-static int skl_dsp_trigger(struct snd_pcm_substream *substream,
+static int skl_decoupled_trigger(struct snd_pcm_substream *substream,
 		int cmd)
 {
 	struct hdac_ext_bus *ebus = get_bus_ctx(substream);
@@ -708,9 +777,9 @@ static int skl_platform_pcm_trigger(struct snd_pcm_substream *substream,
 	struct hdac_ext_bus *ebus = get_bus_ctx(substream);
 
 	if (ebus->ppcap)
-		return skl_dsp_trigger(substream, cmd);
+		return skl_decoupled_trigger(substream, cmd);
 	else
-		return skl_pcm_trigger(substream, cmd);
+		return skl_coupled_trigger(substream, cmd);
 }
 
 /* calculate runtime delay from LPIB */
@@ -877,7 +946,17 @@ static int skl_pcm_new(struct snd_soc_pcm_runtime *rtd)
 	return retval;
 }
 
+static int skl_platform_soc_probe(struct snd_soc_platform *platform)
+{
+	struct hdac_ext_bus *ebus = dev_get_drvdata(platform->dev);
+
+	if (ebus->ppcap)
+		return skl_tplg_init(platform, ebus);
+
+	return 0;
+}
 static struct snd_soc_platform_driver skl_platform_drv  = {
+	.probe		= skl_platform_soc_probe,
 	.ops		= &skl_platform_ops,
 	.pcm_new	= skl_pcm_new,
 	.pcm_free	= skl_pcm_free,
@@ -890,6 +969,11 @@ static const struct snd_soc_component_driver skl_component = {
 int skl_platform_register(struct device *dev)
 {
 	int ret;
+	struct hdac_ext_bus *ebus = dev_get_drvdata(dev);
+	struct skl *skl = ebus_to_skl(ebus);
+
+	INIT_LIST_HEAD(&skl->ppl_list);
+	INIT_LIST_HEAD(&skl->dapm_path_list);
 
 	ret = snd_soc_register_platform(dev, &skl_platform_drv);
 	if (ret) {
-- 
1.9.1

  parent reply	other threads:[~2015-08-17 17:24 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-17 17:26 [PATCH v2 0/9] Add DSP topology management for SKL Vinod Koul
2015-08-17 17:26 ` [PATCH v2 1/9] ASoC: Intel: Skylake: Add pipe and modules handlers Vinod Koul
2015-09-19 16:00   ` Mark Brown
2015-09-21  3:37     ` Vinod Koul
2015-09-21 16:36       ` Mark Brown
2015-08-17 17:26 ` [PATCH v2 2/9] ASoC: Intel: Skylake: Add module configuration helpers Vinod Koul
2015-08-17 17:26 ` [PATCH v2 3/9] ASoC: Intel: Skylake: add DSP platform widget event handlers Vinod Koul
2015-09-17  9:47   ` Liam Girdwood
2015-09-17 11:38     ` Vinod Koul
2015-09-17 12:25       ` Liam Girdwood
2015-09-18  4:22         ` Vinod Koul
2015-09-19 16:11   ` Mark Brown
2015-09-21  3:24     ` Vinod Koul
2015-08-17 17:26 ` [PATCH v2 4/9] ASoC: Intel: Skylake: Add FE and BE hw_params handling Vinod Koul
2015-09-19 16:22   ` Mark Brown
2015-09-21  3:13     ` Vinod Koul
2015-08-17 17:26 ` [PATCH v2 5/9] ASoC: Intel: Skylake: Add topology core init and handlers Vinod Koul
2015-09-18  9:55   ` Liam Girdwood
2015-09-18 15:09     ` Vinod Koul
2015-08-17 17:26 ` Vinod Koul [this message]
2015-09-18  9:58   ` [PATCH v2 6/9] ASoC: Intel: Skylake: Initialize and load DSP controls Liam Girdwood
2015-09-18 15:11     ` Vinod Koul
2015-09-19 16:26     ` Mark Brown
2015-09-21  3:26       ` Vinod Koul
2015-08-17 17:26 ` [PATCH v2 7/9] ASoC: Intel: Skylake: Add DSP support and enable it Vinod Koul
2015-08-17 17:26 ` [PATCH v2 8/9] ASoC: Intel: Skylake: Initialize NHLT table Vinod Koul
2015-09-19 16:27   ` Mark Brown
2015-09-21  3:38     ` Vinod Koul
2015-08-17 17:26 ` [PATCH v2 9/9] ASoC: Intel: Skylake: Remove unused CPU dai's Vinod Koul
2015-09-03  8:14 ` [PATCH v2 0/9] Add DSP topology management for SKL Vinod Koul
2015-09-11 11:45   ` Mark Brown
2015-09-19 16:56     ` Mark Brown
2015-09-21  3:57       ` Vinod Koul
2015-09-21 16:33         ` Mark Brown
2015-09-21 16:47           ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1439832404-12424-7-git-send-email-vinod.koul@intel.com \
    --to=vinod.koul@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=jeeja.kp@intel.com \
    --cc=liam.r.girdwood@linux.intel.com \
    --cc=patches.audio@intel.com \
    --cc=subhransu.s.prusty@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).