From: Vinod Koul <vinod.koul@intel.com>
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de, patches.audio@intel.com,
liam.r.girdwood@linux.intel.com,
Vinod Koul <vinod.koul@intel.com>,
broonie@kernel.org, Jeeja KP <jeeja.kp@intel.com>
Subject: [PATCH v2 01/13] ASoC: Intel: Skylake: Clear stream registers before stream setup
Date: Sat, 12 Dec 2015 17:36:21 +0530 [thread overview]
Message-ID: <1449921993-21101-2-git-send-email-vinod.koul@intel.com> (raw)
In-Reply-To: <1449921993-21101-1-git-send-email-vinod.koul@intel.com>
From: Jeeja KP <jeeja.kp@intel.com>
This patch adds clean up routine to clear the stream registers and
calls this routine before setting up stream registers.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
sound/soc/intel/skylake/skl-sst-cldma.c | 38 ++++++++++++++++++++-------------
1 file changed, 23 insertions(+), 15 deletions(-)
diff --git a/sound/soc/intel/skylake/skl-sst-cldma.c b/sound/soc/intel/skylake/skl-sst-cldma.c
index 8c7e8576cba3..da2329d17f4d 100644
--- a/sound/soc/intel/skylake/skl-sst-cldma.c
+++ b/sound/soc/intel/skylake/skl-sst-cldma.c
@@ -60,6 +60,27 @@ static void skl_cldma_stream_run(struct sst_dsp *ctx, bool enable)
dev_err(ctx->dev, "Failed to set Run bit=%d enable=%d\n", val, enable);
}
+static void skl_cldma_stream_clear(struct sst_dsp *ctx)
+{
+ /* make sure Run bit is cleared before setting stream register */
+ skl_cldma_stream_run(ctx, 0);
+
+ sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+ CL_SD_CTL_IOCE_MASK, CL_SD_CTL_IOCE(0));
+ sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+ CL_SD_CTL_FEIE_MASK, CL_SD_CTL_FEIE(0));
+ sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+ CL_SD_CTL_DEIE_MASK, CL_SD_CTL_DEIE(0));
+ sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+ CL_SD_CTL_STRM_MASK, CL_SD_CTL_STRM(0));
+
+ sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPL, CL_SD_BDLPLBA(0));
+ sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPU, 0);
+
+ sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_CBL, 0);
+ sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_LVI, 0);
+}
+
/* Code loader helper APIs */
static void skl_cldma_setup_bdle(struct sst_dsp *ctx,
struct snd_dma_buffer *dmab_data,
@@ -95,6 +116,7 @@ static void skl_cldma_setup_controller(struct sst_dsp *ctx,
struct snd_dma_buffer *dmab_bdl, unsigned int max_size,
u32 count)
{
+ skl_cldma_stream_clear(ctx);
sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPL,
CL_SD_BDLPLBA(dmab_bdl->addr));
sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPU,
@@ -137,21 +159,7 @@ static void skl_cldma_cleanup_spb(struct sst_dsp *ctx)
static void skl_cldma_cleanup(struct sst_dsp *ctx)
{
skl_cldma_cleanup_spb(ctx);
-
- sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
- CL_SD_CTL_IOCE_MASK, CL_SD_CTL_IOCE(0));
- sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
- CL_SD_CTL_FEIE_MASK, CL_SD_CTL_FEIE(0));
- sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
- CL_SD_CTL_DEIE_MASK, CL_SD_CTL_DEIE(0));
- sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
- CL_SD_CTL_STRM_MASK, CL_SD_CTL_STRM(0));
-
- sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPL, CL_SD_BDLPLBA(0));
- sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPU, 0);
-
- sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_CBL, 0);
- sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_LVI, 0);
+ skl_cldma_stream_clear(ctx);
ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_data);
ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_bdl);
--
1.9.1
next prev parent reply other threads:[~2015-12-12 12:03 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-12 12:06 [PATCH v2 00/13] ASoC: Intel: Skylake: Update to SKL driver Vinod Koul
2015-12-12 12:06 ` Vinod Koul [this message]
2015-12-12 12:06 ` [PATCH v2 02/13] ASoC: Intel: Skylake: Fix to set pipe state to invalid when deleting Vinod Koul
2015-12-12 12:06 ` [PATCH v2 03/13] ALSA: hdac: Add support for hda DMA Resume capability Vinod Koul
2015-12-12 12:06 ` [PATCH v2 04/13] ALSA: hdac: couple the hda DMA stream in cleanup Vinod Koul
2015-12-12 12:06 ` [PATCH v2 05/13] ALSA: hdac: Increase timeout value for link power check Vinod Koul
2015-12-12 12:06 ` [PATCH v2 06/13] ALSA: hdac: add snd_hdac_ext_bus_link_power_up_all Vinod Koul
2015-12-12 12:06 ` [PATCH v2 07/13] ASoC: Intel: Skylake: fix reset controller sequencing Vinod Koul
2015-12-12 12:06 ` [PATCH v2 08/13] ASoC: Intel: Skylake: Use CGCTL.MISCBDCGE for Phrase detection notification Vinod Koul
[not found] ` <201512130213.fd9SElQX%fengguang.wu@intel.com>
2015-12-14 4:22 ` Vinod Koul
2015-12-12 12:06 ` [PATCH v2 09/13] ASoC: Intel: Skylake: manage link power in active suspend Vinod Koul
2015-12-12 12:06 ` [PATCH v2 10/13] ASoC: Intel: Skylake: enable interrupt as wake source " Vinod Koul
2015-12-12 12:06 ` [PATCH v2 11/13] ASoC: Intel: Skylake: Add DMA resume position in Trigger resume/suspend Vinod Koul
2015-12-12 12:06 ` [PATCH v2 12/13] ASoC: Intel: Skylake: Reconfigure Link stream on suspend/resume Vinod Koul
2015-12-12 12:06 ` [PATCH v2 13/13] ASoC: Intel: Skylake: Add Resume capability in PCM info Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449921993-21101-2-git-send-email-vinod.koul@intel.com \
--to=vinod.koul@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=jeeja.kp@intel.com \
--cc=liam.r.girdwood@linux.intel.com \
--cc=patches.audio@intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox