From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: broonie@kernel.org
Cc: alsa-devel@alsa-project.org, vinod.koul@intel.com,
patches@opensource.wolfsonmicro.com, lgirdwood@gmail.com,
tiwai@suse.com
Subject: [PATCH v3 1/8] ASoC: wm5110: Provide basic hookup for voice control
Date: Tue, 15 Dec 2015 11:29:42 +0000 [thread overview]
Message-ID: <1450178989-8749-2-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1450178989-8749-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>
Register a platform driver for the CODEC and add DAIs that will be used
to connect a compressed record path for the voice control functionality.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
sound/soc/codecs/Kconfig | 1 +
sound/soc/codecs/arizona.h | 2 +-
sound/soc/codecs/wm5110.c | 46 +++++++++++++++++++++++++++++++++++++++++++++-
3 files changed, 47 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index c971371..57499ea 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -220,6 +220,7 @@ config SND_SOC_WM_HUBS
config SND_SOC_WM_ADSP
tristate
+ select SND_SOC_COMPRESS
default y if SND_SOC_CS47L24=y
default y if SND_SOC_WM5102=y
default y if SND_SOC_WM5110=y
diff --git a/sound/soc/codecs/arizona.h b/sound/soc/codecs/arizona.h
index b4f1867..8b6adb5 100644
--- a/sound/soc/codecs/arizona.h
+++ b/sound/soc/codecs/arizona.h
@@ -57,7 +57,7 @@
#define ARIZONA_CLK_98MHZ 5
#define ARIZONA_CLK_147MHZ 6
-#define ARIZONA_MAX_DAI 6
+#define ARIZONA_MAX_DAI 8
#define ARIZONA_MAX_ADSP 4
#define ARIZONA_DVFS_SR1_RQ 0x001
diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c
index e93e542..67d5651 100644
--- a/sound/soc/codecs/wm5110.c
+++ b/sound/soc/codecs/wm5110.c
@@ -1810,6 +1810,9 @@ static const struct snd_soc_dapm_route wm5110_dapm_routes[] = {
{ "Slim2 Capture", NULL, "SYSCLK" },
{ "Slim3 Capture", NULL, "SYSCLK" },
+ { "Voice Control DSP", NULL, "DSP3" },
+ { "Voice Control DSP", NULL, "SYSCLK" },
+
{ "IN1L PGA", NULL, "IN1L" },
{ "IN1R PGA", NULL, "IN1R" },
@@ -2132,6 +2135,27 @@ static struct snd_soc_dai_driver wm5110_dai[] = {
},
.ops = &arizona_simple_dai_ops,
},
+ {
+ .name = "wm5110-cpu-voicectrl",
+ .capture = {
+ .stream_name = "Voice Control CPU",
+ .channels_min = 1,
+ .channels_max = 1,
+ .rates = WM5110_RATES,
+ .formats = WM5110_FORMATS,
+ },
+ .compress_new = snd_soc_new_compress,
+ },
+ {
+ .name = "wm5110-dsp-voicectrl",
+ .capture = {
+ .stream_name = "Voice Control DSP",
+ .channels_min = 1,
+ .channels_max = 1,
+ .rates = WM5110_RATES,
+ .formats = WM5110_FORMATS,
+ },
+ },
};
static int wm5110_codec_probe(struct snd_soc_codec *codec)
@@ -2224,6 +2248,13 @@ static struct snd_soc_codec_driver soc_codec_dev_wm5110 = {
.num_dapm_routes = ARRAY_SIZE(wm5110_dapm_routes),
};
+static struct snd_compr_ops wm5110_compr_ops = {
+};
+
+static struct snd_soc_platform_driver wm5110_compr_platform = {
+ .compr_ops = &wm5110_compr_ops,
+};
+
static int wm5110_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
@@ -2284,8 +2315,21 @@ static int wm5110_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
pm_runtime_idle(&pdev->dev);
- return snd_soc_register_codec(&pdev->dev, &soc_codec_dev_wm5110,
+ ret = snd_soc_register_platform(&pdev->dev, &wm5110_compr_platform);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to register platform: %d\n", ret);
+ goto error;
+ }
+
+ ret = snd_soc_register_codec(&pdev->dev, &soc_codec_dev_wm5110,
wm5110_dai, ARRAY_SIZE(wm5110_dai));
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to register codec: %d\n", ret);
+ snd_soc_unregister_platform(&pdev->dev);
+ }
+
+error:
+ return ret;
}
static int wm5110_remove(struct platform_device *pdev)
--
2.1.4
next prev parent reply other threads:[~2015-12-15 11:29 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-15 11:29 [PATCH v3 0/8] Add support for voice control on Arizona ADSP Charles Keepax
2015-12-15 11:29 ` Charles Keepax [this message]
2015-12-15 11:29 ` [PATCH v3 2/8] ASoC: wm_adsp: Factor out finding the location of an algorithm region Charles Keepax
2015-12-15 11:29 ` [PATCH v3 3/8] ALSA: compress: Add SND_AUDIOCODEC_BESPOKE Charles Keepax
2015-12-15 11:29 ` [PATCH v3 4/8] ASoC: wm_adsp: Add support for opening a compressed stream Charles Keepax
2015-12-23 0:14 ` Mark Brown
2015-12-23 10:00 ` Charles Keepax
2015-12-23 10:08 ` Charles Keepax
2015-12-15 11:29 ` [PATCH v3 5/8] ASoC: wm_adsp: Add code to locate and initialise compressed buffer Charles Keepax
2015-12-15 11:29 ` [PATCH v3 6/8] ASoC: wm_adsp: Attach buffers and streams together Charles Keepax
2015-12-15 11:29 ` [PATCH v3 7/8] ASoC: wm_adsp: Add a handler for the compressed IRQ Charles Keepax
2015-12-23 0:19 ` Mark Brown
2015-12-23 9:58 ` Charles Keepax
2015-12-24 19:31 ` Mark Brown
2015-12-29 15:43 ` Charles Keepax
2016-01-05 14:20 ` Mark Brown
2016-01-05 14:36 ` Charles Keepax
2016-01-05 16:10 ` Mark Brown
2015-12-15 11:29 ` [PATCH v3 8/8] ASoC: wm_adsp: Pull data through compressed read Charles Keepax
2016-01-06 18:12 ` Applied "ASoC: wm_adsp: Pull data through compressed read" to the asoc tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450178989-8749-2-git-send-email-ckeepax@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=patches@opensource.wolfsonmicro.com \
--cc=tiwai@suse.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).