From: libin.yang@linux.intel.com
To: alsa-devel@alsa-project.org, tiwai@suse.de
Cc: libin.yang@intel.com, mengdong.lin@intel.com,
Libin Yang <libin.yang@linux.intel.com>
Subject: [PATCH] ALSA: hda - hdmi create spdif ctl based on pcm
Date: Thu, 14 Jan 2016 15:49:46 +0800 [thread overview]
Message-ID: <1452757786-103694-1-git-send-email-libin.yang@linux.intel.com> (raw)
From: Libin Yang <libin.yang@linux.intel.com>
SPDIF ctl should be based on pcm. Each spdif ctl controls
one pcm state.
This patch creates spdif based on pcm and no longer
based on pin.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
---
sound/pci/hda/patch_hdmi.c | 27 ++++++++++++++++++---------
1 file changed, 18 insertions(+), 9 deletions(-)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index dfb7c26..2f949fb 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -2255,6 +2255,7 @@ static int hdmi_pcm_close(struct hda_pcm_stream *hinfo,
hinfo->nid = 0;
mutex_lock(&spec->pcm_lock);
+ snd_hda_spdif_ctls_unassign(codec, pcm_idx);
clear_bit(pcm_idx, &spec->pcm_in_use);
pin_idx = hinfo_to_pin_index(codec, hinfo);
if (spec->dyn_pcm_assign && pin_idx < 0) {
@@ -2276,8 +2277,6 @@ static int hdmi_pcm_close(struct hda_pcm_stream *hinfo,
pinctl & ~PIN_OUT);
}
- snd_hda_spdif_ctls_unassign(codec, pcm_idx);
-
mutex_lock(&per_pin->lock);
per_pin->chmap_set = false;
memset(per_pin->chmap, 0, sizeof(per_pin->chmap));
@@ -2560,19 +2559,29 @@ static int generic_hdmi_build_controls(struct hda_codec *codec)
err = generic_hdmi_build_jack(codec, pcm_idx);
if (err < 0)
return err;
- }
- for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
- struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
-
- err = snd_hda_create_dig_out_ctls(codec,
+ /* create the spdif for each pcm
+ * pin will be bound when monitor is connected
+ */
+ if (spec->dyn_pcm_assign)
+ err = snd_hda_create_dig_out_ctls(codec,
+ 0, spec->cvt_nids[0],
+ HDA_PCM_TYPE_HDMI);
+ else {
+ struct hdmi_spec_per_pin *per_pin =
+ get_pin(spec, pcm_idx);
+ err = snd_hda_create_dig_out_ctls(codec,
per_pin->pin_nid,
per_pin->mux_nids[0],
HDA_PCM_TYPE_HDMI);
+ }
if (err < 0)
return err;
- /* pin number is the same with pcm number so far */
- snd_hda_spdif_ctls_unassign(codec, pin_idx);
+ snd_hda_spdif_ctls_unassign(codec, pcm_idx);
+ }
+
+ for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
+ struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
/* add control for ELD Bytes */
err = hdmi_create_eld_ctl(codec, pin_idx,
--
1.9.1
next reply other threads:[~2016-01-14 7:53 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-14 7:49 libin.yang [this message]
2016-01-14 9:08 ` [PATCH] ALSA: hda - hdmi create spdif ctl based on pcm Takashi Iwai
2016-01-15 0:46 ` Yang, Libin
2016-01-15 5:51 ` Takashi Iwai
-- strict thread matches above, loose matches on Subject: below --
2016-01-29 5:53 libin.yang
2016-01-29 5:59 ` Yang, Libin
2016-01-29 6:38 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1452757786-103694-1-git-send-email-libin.yang@linux.intel.com \
--to=libin.yang@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=libin.yang@intel.com \
--cc=mengdong.lin@intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox