alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Jacob Siverskog <jacob@teenage.engineering>
To: Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Michael Trimarchi <michael@amarulasolutions.com>,
	Johan Hovold <johan@kernel.org>,
	alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
	Jacob Siverskog <jacob@teenage.engineering>
Subject: [PATCH v3 1/3] ASoC: pcm179x: Split into core and SPI parts
Date: Thu, 21 Jan 2016 16:26:56 +0100	[thread overview]
Message-ID: <1453390018-16854-2-git-send-email-jacob@teenage.engineering> (raw)
In-Reply-To: <1453390018-16854-1-git-send-email-jacob@teenage.engineering>

The pcm179x family supports both SPI and I2C for configuration. This
patch splits the driver into core and SPI parts, in preparation for
I2C support.

Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
---
 sound/soc/codecs/Kconfig       | 11 ++++++--
 sound/soc/codecs/Makefile      |  2 ++
 sound/soc/codecs/pcm179x-spi.c | 63 ++++++++++++++++++++++++++++++++++++++++++
 sound/soc/codecs/pcm179x.c     | 57 ++++++++++++--------------------------
 sound/soc/codecs/pcm179x.h     |  5 ++++
 5 files changed, 96 insertions(+), 42 deletions(-)
 create mode 100644 sound/soc/codecs/pcm179x-spi.c

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 0f279c2..3866717 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -83,7 +83,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_ML26124 if I2C
 	select SND_SOC_NAU8825 if I2C
 	select SND_SOC_PCM1681 if I2C
-	select SND_SOC_PCM179X if SPI_MASTER
+	select SND_SOC_PCM179X_SPI if SPI_MASTER
 	select SND_SOC_PCM3008
 	select SND_SOC_PCM512x_I2C if I2C
 	select SND_SOC_PCM512x_SPI if SPI_MASTER
@@ -500,8 +500,15 @@ config SND_SOC_PCM1681
 	depends on I2C
 
 config SND_SOC_PCM179X
-	tristate "Texas Instruments PCM179X CODEC"
+	tristate
+
+config SND_SOC_PCM179X_SPI
+	tristate "Texas Instruments PCM179X CODEC (SPI)"
 	depends on SPI_MASTER
+	select SND_SOC_PCM179X
+	help
+	  Enable support for Texas Instruments PCM179x CODEC.
+	  Select this if your PCM179x is connected via an SPI bus.
 
 config SND_SOC_PCM3008
        tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index c2d2ced..0fa454c 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -77,6 +77,7 @@ snd-soc-ml26124-objs := ml26124.o
 snd-soc-nau8825-objs := nau8825.o
 snd-soc-pcm1681-objs := pcm1681.o
 snd-soc-pcm179x-codec-objs := pcm179x.o
+snd-soc-pcm179x-spi-objs := pcm179x-spi.o
 snd-soc-pcm3008-objs := pcm3008.o
 snd-soc-pcm512x-objs := pcm512x.o
 snd-soc-pcm512x-i2c-objs := pcm512x-i2c.o
@@ -275,6 +276,7 @@ obj-$(CONFIG_SND_SOC_ML26124)	+= snd-soc-ml26124.o
 obj-$(CONFIG_SND_SOC_NAU8825)   += snd-soc-nau8825.o
 obj-$(CONFIG_SND_SOC_PCM1681)	+= snd-soc-pcm1681.o
 obj-$(CONFIG_SND_SOC_PCM179X)	+= snd-soc-pcm179x-codec.o
+obj-$(CONFIG_SND_SOC_PCM179X_SPI)	+= snd-soc-pcm179x-spi.o
 obj-$(CONFIG_SND_SOC_PCM3008)	+= snd-soc-pcm3008.o
 obj-$(CONFIG_SND_SOC_PCM512x)	+= snd-soc-pcm512x.o
 obj-$(CONFIG_SND_SOC_PCM512x_I2C)	+= snd-soc-pcm512x-i2c.o
diff --git a/sound/soc/codecs/pcm179x-spi.c b/sound/soc/codecs/pcm179x-spi.c
new file mode 100644
index 0000000..5842add9
--- /dev/null
+++ b/sound/soc/codecs/pcm179x-spi.c
@@ -0,0 +1,63 @@
+/*
+ * PCM179X ASoC SPI driver
+ *
+ * Copyright (c) Amarula Solutions B.V. 2013
+ *
+ *     Michael Trimarchi <michael@amarulasolutions.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+#include <linux/regmap.h>
+
+#include "pcm179x.h"
+
+static int pcm179x_spi_probe(struct spi_device *spi)
+{
+	return pcm179x_common_init(&spi->dev,
+			devm_regmap_init_spi(spi, &pcm179x_regmap_config));
+}
+
+static int pcm179x_spi_remove(struct spi_device *spi)
+{
+	return pcm179x_common_exit(&spi->dev);
+}
+
+static const struct of_device_id pcm179x_of_match[] = {
+	{ .compatible = "ti,pcm1792a", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pcm179x_of_match);
+
+static const struct spi_device_id pcm179x_spi_ids[] = {
+	{ "pcm179x", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, pcm179x_spi_ids);
+
+static struct spi_driver pcm179x_spi_driver = {
+	.driver = {
+		.name = "pcm179x",
+		.of_match_table = of_match_ptr(pcm179x_of_match),
+	},
+	.id_table = pcm179x_spi_ids,
+	.probe = pcm179x_spi_probe,
+	.remove = pcm179x_spi_remove,
+};
+
+module_spi_driver(pcm179x_spi_driver);
+
+MODULE_DESCRIPTION("ASoC PCM179X SPI driver");
+MODULE_AUTHOR("Michael Trimarchi <michael@amarulasolutions.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/pcm179x.c b/sound/soc/codecs/pcm179x.c
index a56c7b7..eba451f 100644
--- a/sound/soc/codecs/pcm179x.c
+++ b/sound/soc/codecs/pcm179x.c
@@ -20,7 +20,6 @@
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
-#include <linux/spi/spi.h>
 
 #include <sound/core.h>
 #include <sound/pcm.h>
@@ -29,7 +28,6 @@
 #include <sound/soc.h>
 #include <sound/tlv.h>
 #include <linux/of.h>
-#include <linux/of_device.h>
 
 #include "pcm179x.h"
 
@@ -194,13 +192,7 @@ static struct snd_soc_dai_driver pcm179x_dai = {
 	.ops = &pcm179x_dai_ops,
 };
 
-static const struct of_device_id pcm179x_of_match[] = {
-	{ .compatible = "ti,pcm1792a", },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, pcm179x_of_match);
-
-static const struct regmap_config pcm179x_regmap = {
+const struct regmap_config pcm179x_regmap_config = {
 	.reg_bits		= 8,
 	.val_bits		= 8,
 	.max_register		= 23,
@@ -209,6 +201,7 @@ static const struct regmap_config pcm179x_regmap = {
 	.writeable_reg		= pcm179x_writeable_reg,
 	.readable_reg		= pcm179x_accessible_reg,
 };
+EXPORT_SYMBOL_GPL(pcm179x_regmap_config);
 
 static struct snd_soc_codec_driver soc_codec_dev_pcm179x = {
 	.controls		= pcm179x_controls,
@@ -219,52 +212,36 @@ static struct snd_soc_codec_driver soc_codec_dev_pcm179x = {
 	.num_dapm_routes	= ARRAY_SIZE(pcm179x_dapm_routes),
 };
 
-static int pcm179x_spi_probe(struct spi_device *spi)
+int pcm179x_common_init(struct device *dev, struct regmap *regmap)
 {
 	struct pcm179x_private *pcm179x;
 	int ret;
 
-	pcm179x = devm_kzalloc(&spi->dev, sizeof(struct pcm179x_private),
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		dev_err(dev, "Failed to register regmap: %d\n", ret);
+		return ret;
+	}
+
+	pcm179x = devm_kzalloc(dev, sizeof(struct pcm179x_private),
 				GFP_KERNEL);
 	if (!pcm179x)
 		return -ENOMEM;
 
-	spi_set_drvdata(spi, pcm179x);
-
-	pcm179x->regmap = devm_regmap_init_spi(spi, &pcm179x_regmap);
-	if (IS_ERR(pcm179x->regmap)) {
-		ret = PTR_ERR(pcm179x->regmap);
-		dev_err(&spi->dev, "Failed to register regmap: %d\n", ret);
-		return ret;
-	}
+	pcm179x->regmap = regmap;
+	dev_set_drvdata(dev, pcm179x);
 
-	return snd_soc_register_codec(&spi->dev,
+	return snd_soc_register_codec(dev,
 			&soc_codec_dev_pcm179x, &pcm179x_dai, 1);
 }
+EXPORT_SYMBOL_GPL(pcm179x_common_init);
 
-static int pcm179x_spi_remove(struct spi_device *spi)
+int pcm179x_common_exit(struct device *dev)
 {
-	snd_soc_unregister_codec(&spi->dev);
+	snd_soc_unregister_codec(dev);
 	return 0;
 }
-
-static const struct spi_device_id pcm179x_spi_ids[] = {
-	{ "pcm179x", 0 },
-	{ },
-};
-MODULE_DEVICE_TABLE(spi, pcm179x_spi_ids);
-
-static struct spi_driver pcm179x_codec_driver = {
-	.driver = {
-		.name = "pcm179x",
-		.of_match_table = of_match_ptr(pcm179x_of_match),
-	},
-	.id_table = pcm179x_spi_ids,
-	.probe = pcm179x_spi_probe,
-	.remove = pcm179x_spi_remove,
-};
-
-module_spi_driver(pcm179x_codec_driver);
+EXPORT_SYMBOL_GPL(pcm179x_common_exit);
 
 MODULE_DESCRIPTION("ASoC PCM179X driver");
 MODULE_AUTHOR("Michael Trimarchi <michael@amarulasolutions.com>");
diff --git a/sound/soc/codecs/pcm179x.h b/sound/soc/codecs/pcm179x.h
index c6fdc06..c4eea4d 100644
--- a/sound/soc/codecs/pcm179x.h
+++ b/sound/soc/codecs/pcm179x.h
@@ -24,4 +24,9 @@
 #define PCM1792A_FORMATS (SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S24_LE | \
 			  SNDRV_PCM_FMTBIT_S16_LE)
 
+extern const struct regmap_config pcm179x_regmap_config;
+
+int pcm179x_common_init(struct device *dev, struct regmap *regmap);
+int pcm179x_common_exit(struct device *dev);
+
 #endif
-- 
2.7.0

  reply	other threads:[~2016-01-21 15:26 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-21 15:26 [PATCH v3 0/3] ASoC: pcm179x: Add I2C support, declare support for continuous rates Jacob Siverskog
2016-01-21 15:26 ` Jacob Siverskog [this message]
2016-01-21 15:36   ` [PATCH v3 1/3] ASoC: pcm179x: Split into core and SPI parts Johan Hovold
2016-01-21 16:27     ` Michael Trimarchi
2016-01-21 17:56       ` Johan Hovold
2016-01-22 12:17         ` Jacob Siverskog
2016-01-21 15:26 ` [PATCH v3 2/3] ASoC: pcm179x: Add I2C interface driver Jacob Siverskog
2016-01-21 15:26 ` [PATCH v3 3/3] ASoC: pcm179x: Support continuous rates Jacob Siverskog
2016-01-29  0:22   ` Applied "ASoC: pcm179x: Support continuous rates" to the asoc tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1453390018-16854-2-git-send-email-jacob@teenage.engineering \
    --to=jacob@teenage.engineering \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=johan@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael@amarulasolutions.com \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).