From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fabio Estevam Subject: [PATCH] ASoC: sgtl5000: Place optional properties in the correct section Date: Tue, 31 May 2016 17:41:50 -0300 Message-ID: <1464727310-10034-1-git-send-email-festevam@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mail-yw0-f195.google.com (mail-yw0-f195.google.com [209.85.161.195]) by alsa0.perex.cz (Postfix) with ESMTP id 3838D2651D1 for ; Tue, 31 May 2016 22:42:01 +0200 (CEST) Received: by mail-yw0-f195.google.com with SMTP id j74so20553979ywg.1 for ; Tue, 31 May 2016 13:42:01 -0700 (PDT) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: broonie@kernel.org Cc: Fabio Estevam , jean-michel.hautbois@vodalys.com, alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org From: Fabio Estevam 'micbias-resistor-k-ohms' and 'micbias-voltage-m-volts' are optional properties, so move them below the 'Optional properties' line. While at it, fix a typo in 'mentioned'. Signed-off-by: Fabio Estevam --- Documentation/devicetree/bindings/sound/sgtl5000.txt | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 0e5e4eb..5666da7 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt @@ -7,6 +7,14 @@ Required properties: - clocks : the clock provider of SYS_MCLK +- VDDA-supply : the regulator provider of VDDA + +- VDDIO-supply: the regulator provider of VDDIO + +Optional properties: + +- VDDD-supply : the regulator provider of VDDD + - micbias-resistor-k-ohms : the bias resistor to be used in kOmhs The resistor can take values of 2k, 4k or 8k. If set to 0 it will be off. @@ -15,17 +23,9 @@ Required properties: - micbias-voltage-m-volts : the bias voltage to be used in mVolts The voltage can take values from 1.25V to 3V by 250mV steps - If this node is not mentionned or the value is unknown, then + If this node is not mentioned or the value is unknown, then the value is set to 1.25V. -- VDDA-supply : the regulator provider of VDDA - -- VDDIO-supply: the regulator provider of VDDIO - -Optional properties: - -- VDDD-supply : the regulator provider of VDDD - Example: codec: sgtl5000@0a { -- 1.9.1