From mboxrd@z Thu Jan 1 00:00:00 1970 From: jeeja.kp@intel.com Subject: [PATCH 09/10] ASoC: Intel: Skylake: Copy the pipe parameter by pipe type Date: Fri, 3 Jun 2016 18:29:42 +0530 Message-ID: <1464958783-19344-10-git-send-email-jeeja.kp@intel.com> References: <1464958783-19344-1-git-send-email-jeeja.kp@intel.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mga03.intel.com (mga03.intel.com [134.134.136.65]) by alsa0.perex.cz (Postfix) with ESMTP id 9B2552665AE for ; Fri, 3 Jun 2016 14:56:36 +0200 (CEST) In-Reply-To: <1464958783-19344-1-git-send-email-jeeja.kp@intel.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: alsa-devel@alsa-project.org Cc: patches.audio@intel.com, Jeeja KP , broonie@kernel.org, Vinod Koul , liam.r.girdwood@intel.com List-Id: alsa-devel@alsa-project.org From: Jeeja KP For pass through pipe, Host and Link DMA id's are valid, instead of overwriting the params set the host and link based on pipe type. Signed-off-by: Jeeja KP Signed-off-by: Vinod Koul --- sound/soc/intel/skylake/skl-topology.c | 39 ++++++++++++++++++++++++++++++---- 1 file changed, 35 insertions(+), 4 deletions(-) diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 2f1991d..b284b3c 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -1111,6 +1111,39 @@ static int skl_tplg_tlv_control_set(struct snd_kcontrol *kcontrol, } /* + * Fill the dma id for host and link. In case of passthrough + * pipeline, this will both host and link in the same + * pipeline, so need to copy the link and host based on dev_type + */ +static void skl_tplg_fill_dma_id(struct skl_module_cfg *mcfg, + struct skl_pipe_params *params) +{ + struct skl_pipe *pipe = mcfg->pipe; + + if (pipe->passthru) { + switch (mcfg->dev_type) { + case SKL_DEVICE_HDALINK: + pipe->p_params->link_dma_id = params->link_dma_id; + break; + + case SKL_DEVICE_HDAHOST: + pipe->p_params->host_dma_id = params->host_dma_id; + break; + + default: + break; + } + pipe->p_params->s_fmt = params->s_fmt; + pipe->p_params->ch = params->ch; + pipe->p_params->s_freq = params->s_freq; + pipe->p_params->stream = params->stream; + + } else { + memcpy(pipe->p_params, params, sizeof(*params)); + } +} + +/* * The FE params are passed by hw_params of the DAI. * On hw_params, the params are stored in Gateway module of the FE and we * need to calculate the format in DSP module configuration, that @@ -1120,10 +1153,9 @@ int skl_tplg_update_pipe_params(struct device *dev, struct skl_module_cfg *mconfig, struct skl_pipe_params *params) { - struct skl_pipe *pipe = mconfig->pipe; struct skl_module_fmt *format = NULL; - memcpy(pipe->p_params, params, sizeof(*params)); + skl_tplg_fill_dma_id(mconfig, params); if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) format = &mconfig->in_fmt[0]; @@ -1310,12 +1342,11 @@ static int skl_tplg_be_fill_pipe_params(struct snd_soc_dai *dai, struct skl_module_cfg *mconfig, struct skl_pipe_params *params) { - struct skl_pipe *pipe = mconfig->pipe; struct nhlt_specific_cfg *cfg; struct skl *skl = get_skl_ctx(dai->dev); int link_type = skl_tplg_be_link_type(mconfig->dev_type); - memcpy(pipe->p_params, params, sizeof(*params)); + skl_tplg_fill_dma_id(mconfig, params); if (link_type == NHLT_LINK_HDA) return 0; -- 2.5.0