From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: broonie@kernel.org
Cc: alsa-devel@alsa-project.org, ajit.pandey@soctronics.com,
lgirdwood@gmail.com, patches@opensource.wolfsonmicro.com
Subject: [PATCH 4/4] ASoC: wm5102: Revert manual speaker enable
Date: Mon, 13 Jun 2016 13:35:17 +0100 [thread overview]
Message-ID: <1465821317-28449-4-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1465821317-28449-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>
The OUT4L and OUT4R widgets are not registered PRE_PMU or POST_PMD
events, as such the manual speaker enable on wm5102 does not actually
ever run. Furthermore since the issue actually only affected rev B of
the silicon which never shipped in volume, simply remove the work around
from the code.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
sound/soc/codecs/arizona.c | 42 ------------------------------------------
sound/soc/codecs/arizona.h | 3 ---
2 files changed, 45 deletions(-)
diff --git a/sound/soc/codecs/arizona.c b/sound/soc/codecs/arizona.c
index 8d6dbf3..ed04257 100644
--- a/sound/soc/codecs/arizona.c
+++ b/sound/soc/codecs/arizona.c
@@ -85,30 +85,9 @@ static int arizona_spk_ev(struct snd_soc_dapm_widget *w,
{
struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
struct arizona *arizona = dev_get_drvdata(codec->dev->parent);
- struct arizona_priv *priv = snd_soc_codec_get_drvdata(codec);
- bool manual_ena = false;
int val;
- switch (arizona->type) {
- case WM5102:
- switch (arizona->rev) {
- case 0:
- break;
- default:
- manual_ena = true;
- break;
- }
- default:
- break;
- }
-
switch (event) {
- case SND_SOC_DAPM_PRE_PMU:
- if (!priv->spk_ena && manual_ena) {
- regmap_write_async(arizona->regmap, 0x4f5, 0x25a);
- priv->spk_ena_pending = true;
- }
- break;
case SND_SOC_DAPM_POST_PMU:
val = snd_soc_read(codec, ARIZONA_INTERRUPT_RAW_STATUS_3);
if (val & ARIZONA_SPK_OVERHEAT_STS) {
@@ -120,33 +99,12 @@ static int arizona_spk_ev(struct snd_soc_dapm_widget *w,
regmap_update_bits_async(arizona->regmap,
ARIZONA_OUTPUT_ENABLES_1,
1 << w->shift, 1 << w->shift);
-
- if (priv->spk_ena_pending) {
- msleep(75);
- regmap_write_async(arizona->regmap, 0x4f5, 0xda);
- priv->spk_ena_pending = false;
- priv->spk_ena++;
- }
break;
case SND_SOC_DAPM_PRE_PMD:
- if (manual_ena) {
- priv->spk_ena--;
- if (!priv->spk_ena)
- regmap_write_async(arizona->regmap,
- 0x4f5, 0x25a);
- }
-
regmap_update_bits_async(arizona->regmap,
ARIZONA_OUTPUT_ENABLES_1,
1 << w->shift, 0);
break;
- case SND_SOC_DAPM_POST_PMD:
- if (manual_ena) {
- if (!priv->spk_ena)
- regmap_write_async(arizona->regmap,
- 0x4f5, 0x0da);
- }
- break;
default:
break;
}
diff --git a/sound/soc/codecs/arizona.h b/sound/soc/codecs/arizona.h
index 2caf4d0..69da1ef 100644
--- a/sound/soc/codecs/arizona.h
+++ b/sound/soc/codecs/arizona.h
@@ -90,9 +90,6 @@ struct arizona_priv {
unsigned int out_down_pending;
unsigned int out_down_delay;
- unsigned int spk_ena:2;
- unsigned int spk_ena_pending:1;
-
unsigned int dvfs_reqs;
struct mutex dvfs_lock;
bool dvfs_cached;
--
2.1.4
next prev parent reply other threads:[~2016-06-13 12:35 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-13 12:35 [PATCH 1/4] ASoC: arizona: Add a couple of missing consts Charles Keepax
2016-06-13 12:35 ` [PATCH 2/4] ASoC: wm5110: Add missing route from OUT3R to SYSCLK Charles Keepax
2016-06-13 15:47 ` Applied "ASoC: wm5110: Add missing route from OUT3R to SYSCLK" to the asoc tree Mark Brown
2016-06-13 12:35 ` [PATCH 3/4] ASoC: wm5102: Correct supported channels on trace compressed DAI Charles Keepax
2016-06-13 15:47 ` Applied "ASoC: wm5102: Correct supported channels on trace compressed DAI" to the asoc tree Mark Brown
2016-06-13 12:35 ` Charles Keepax [this message]
2016-06-13 15:47 ` Applied "ASoC: wm5102: Revert manual speaker enable" " Mark Brown
2016-06-13 15:47 ` Applied "ASoC: arizona: Add a couple of missing consts" " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465821317-28449-4-git-send-email-ckeepax@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=ajit.pandey@soctronics.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).