alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Andrej Krutak <dev@andree.sk>
To: alsa-devel@alsa-project.org
Cc: Andrej Krutak <dev@andree.sk>
Subject: [PATCH 12/15] ALSA: line6: Give up on the lock while URBs are released.
Date: Thu, 11 Aug 2016 21:02:24 +0200	[thread overview]
Message-ID: <1470942147-19848-13-git-send-email-dev@andree.sk> (raw)
In-Reply-To: <1470942147-19848-1-git-send-email-dev@andree.sk>

Done, because line6_stream_stop() locks and calls line6_unlink_audio_urbs(),
which in turn invokes audio_out_callback(), which tries to lock 2nd time.

Fixes:

=============================================
[ INFO: possible recursive locking detected ]
4.4.15+ #15 Not tainted
---------------------------------------------
mplayer/3591 is trying to acquire lock:
 (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa27655>] audio_out_callback+0x70/0x110 [snd_usb_line6]

but task is already holding lock:
 (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6]

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&line6pcm->out.lock)->rlock);
  lock(&(&line6pcm->out.lock)->rlock);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

3 locks held by mplayer/3591:
 #0:  (snd_pcm_link_rwlock){.-.-..}, at: [<bf8d49a7>] snd_pcm_stream_lock+0x1e/0x40 [snd_pcm]
 #1:  (&(&substream->self_group.lock)->rlock){-.-...}, at: [<bf8d49af>] snd_pcm_stream_lock+0x26/0x40 [snd_pcm]
 #2:  (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6]

stack backtrace:
CPU: 0 PID: 3591 Comm: mplayer Not tainted 4.4.15+ #15
Hardware name: Generic AM33XX (Flattened Device Tree)
[<c0015d85>] (unwind_backtrace) from [<c001253d>] (show_stack+0x11/0x14)
[<c001253d>] (show_stack) from [<c02f1bdf>] (dump_stack+0x8b/0xac)
[<c02f1bdf>] (dump_stack) from [<c0076f43>] (__lock_acquire+0xc8b/0x1780)
[<c0076f43>] (__lock_acquire) from [<c007810d>] (lock_acquire+0x99/0x1c0)
[<c007810d>] (lock_acquire) from [<c06171e7>] (_raw_spin_lock_irqsave+0x3f/0x4c)
[<c06171e7>] (_raw_spin_lock_irqsave) from [<bfa27655>] (audio_out_callback+0x70/0x110 [snd_usb_line6])
[<bfa27655>] (audio_out_callback [snd_usb_line6]) from [<c04294db>] (__usb_hcd_giveback_urb+0x53/0xd0)
[<c04294db>] (__usb_hcd_giveback_urb) from [<c046388d>] (musb_giveback+0x3d/0x98)
[<c046388d>] (musb_giveback) from [<c04647f5>] (musb_urb_dequeue+0x6d/0x114)
[<c04647f5>] (musb_urb_dequeue) from [<c042ac11>] (usb_hcd_unlink_urb+0x39/0x98)
[<c042ac11>] (usb_hcd_unlink_urb) from [<bfa26a87>] (line6_unlink_audio_urbs+0x6a/0x6c [snd_usb_line6])
[<bfa26a87>] (line6_unlink_audio_urbs [snd_usb_line6]) from [<bfa26acb>] (line6_stream_stop+0x42/0x5c [snd_usb_line6])
[<bfa26acb>] (line6_stream_stop [snd_usb_line6]) from [<bfa26fe7>] (snd_line6_trigger+0xb6/0xf4 [snd_usb_line6])
[<bfa26fe7>] (snd_line6_trigger [snd_usb_line6]) from [<bf8d47b7>] (snd_pcm_do_stop+0x36/0x38 [snd_pcm])
[<bf8d47b7>] (snd_pcm_do_stop [snd_pcm]) from [<bf8d462f>] (snd_pcm_action_single+0x22/0x40 [snd_pcm])
[<bf8d462f>] (snd_pcm_action_single [snd_pcm]) from [<bf8d46f9>] (snd_pcm_action+0xac/0xb0 [snd_pcm])
[<bf8d46f9>] (snd_pcm_action [snd_pcm]) from [<bf8d4b61>] (snd_pcm_drop+0x38/0x64 [snd_pcm])
[<bf8d4b61>] (snd_pcm_drop [snd_pcm]) from [<bf8d6233>] (snd_pcm_common_ioctl1+0x7fe/0xbe8 [snd_pcm])
[<bf8d6233>] (snd_pcm_common_ioctl1 [snd_pcm]) from [<bf8d6779>] (snd_pcm_playback_ioctl1+0x15c/0x51c [snd_pcm])
[<bf8d6779>] (snd_pcm_playback_ioctl1 [snd_pcm]) from [<bf8d6b59>] (snd_pcm_playback_ioctl+0x20/0x28 [snd_pcm])
[<bf8d6b59>] (snd_pcm_playback_ioctl [snd_pcm]) from [<c016714b>] (do_vfs_ioctl+0x3af/0x5c8)

Signed-off-by: Andrej Krutak <dev@andree.sk>
---
 sound/usb/line6/pcm.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/usb/line6/pcm.c b/sound/usb/line6/pcm.c
index 0af6d4e..13b3b27 100644
--- a/sound/usb/line6/pcm.c
+++ b/sound/usb/line6/pcm.c
@@ -216,7 +216,9 @@ static void line6_stream_stop(struct snd_line6_pcm *line6pcm, int direction,
 	spin_lock_irqsave(&pstr->lock, flags);
 	clear_bit(type, &pstr->running);
 	if (!pstr->running) {
+		spin_unlock_irqrestore(&pstr->lock, flags);
 		line6_unlink_audio_urbs(line6pcm, pstr);
+		spin_lock_irqsave(&pstr->lock, flags);
 		if (direction == SNDRV_PCM_STREAM_CAPTURE) {
 			line6pcm->prev_fbuf = NULL;
 			line6pcm->prev_fsize = 0;
-- 
1.9.1

  parent reply	other threads:[~2016-08-11 19:04 UTC|newest]

Thread overview: 81+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-11 19:02 [PATCH 00/15] Line6 POD X3/X3Live suport Andrej Krutak
2016-08-11 19:02 ` [PATCH 01/15] ALSA: line6: Make driver configuration more generic Andrej Krutak
2016-08-12  8:24   ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 02/15] ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during capture Andrej Krutak
2016-08-11 19:02 ` [PATCH 03/15] ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer (int EP) Andrej Krutak
2016-08-11 19:02 ` [PATCH 04/15] ALSA: line6: Add support for POD X3 Andrej Krutak
2016-08-11 19:02 ` [PATCH 05/15] ALSA: line6: Use device_create_file instead of snd_card_add_dev_attr Andrej Krutak
2016-08-12  8:26   ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 06/15] ALSA: line6: Allow bulk endpoints instead of interrupt endpoints Andrej Krutak
2016-08-11 19:02 ` [PATCH 07/15] ALSA: line6: Allow processing of raw incoming messages Andrej Krutak
2016-08-11 19:02 ` [PATCH 08/15] ALSA: line6: Cleanup initialization Andrej Krutak
2016-08-11 19:02 ` [PATCH 09/15] ALSA: line6: Add hwdep interface to access the POD control messages Andrej Krutak
2016-08-12  8:44   ` Takashi Iwai
2016-08-12 11:10     ` Andrej Kruták
2016-08-12 12:03       ` Takashi Iwai
2016-08-12 12:15         ` Andrej Kruták
2016-08-12 12:30           ` Takashi Iwai
2016-08-12 16:43             ` Andrej Kruták
2016-08-12 20:01               ` Takashi Iwai
2016-08-14  7:59                 ` Andrej Kruták
2016-08-11 19:02 ` [PATCH 10/15] ALSA: line6: Add proper locks for hwdep open/release/read Andrej Krutak
2016-08-12  8:44   ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 11/15] ALSA: line6: Only free buffer if it is set Andrej Krutak
2016-08-12  8:45   ` Takashi Iwai
2016-08-11 19:02 ` Andrej Krutak [this message]
2016-08-12  8:45   ` [PATCH 12/15] ALSA: line6: Give up on the lock while URBs are released Takashi Iwai
2016-08-12 11:14     ` Andrej Kruták
2016-08-12 12:04       ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 13/15] ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD X3) Andrej Krutak
2016-08-11 19:02 ` [PATCH 14/15] ALSA: line6: Give up hwdep spinlock temporarily during read operation Andrej Krutak
2016-08-12  8:46   ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 15/15] ALSA: line6: Remove double line6_pcm_release() after failed acquire Andrej Krutak
2016-08-12  8:46   ` Takashi Iwai
2016-08-12  8:14 ` [PATCH 00/15] Line6 POD X3/X3Live suport Takashi Iwai
2016-08-12 10:31   ` Andrej Kruták
2016-08-18 22:20 ` [PATCH v2 0/9] " Andrej Krutak
2016-08-18 22:20   ` [PATCH v2 1/9] ALSA: line6: Make driver configuration more generic Andrej Krutak
2016-08-24 14:50     ` Takashi Iwai
2016-08-18 22:20   ` [PATCH v2 2/9] ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during capture Andrej Krutak
2016-08-24 14:53     ` Takashi Iwai
2016-08-18 22:20   ` [PATCH v2 3/9] ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer (int EP) Andrej Krutak
2016-08-24 14:56     ` Takashi Iwai
2016-08-18 22:20   ` [PATCH v2 4/9] ALSA: line6: Add support for POD X3 Andrej Krutak
2016-08-18 22:20   ` [PATCH v2 5/9] ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD X3) Andrej Krutak
2016-08-18 22:20   ` [PATCH v2 6/9] ALSA: line6: Allow bulk endpoints instead of interrupt endpoints Andrej Krutak
2016-08-24 15:02     ` Takashi Iwai
2016-08-18 22:20   ` [PATCH v2 7/9] ALSA: line6: Allow processing of raw incoming messages Andrej Krutak
2016-08-24 15:05     ` Takashi Iwai
2016-08-30 14:35       ` Andrej Kruták
2016-08-18 22:20   ` [PATCH v2 8/9] ALSA: line6: Cleanup initialization Andrej Krutak
2016-08-24 15:06     ` Takashi Iwai
2016-08-18 22:20   ` [PATCH v2 9/9] ALSA: line6: Add hwdep interface to access the POD control messages Andrej Krutak
2016-09-16  9:12 ` [PATCH v3 00/12] Line6 POD X3/X3Live suport Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 01/12] ALSA: line6: Enable different number of URBs for frame transfers Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 02/12] ALSA: line6: Add high-speed USB support Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 03/12] ALSA: line6: Support assymetrical in/out configurations Andrej Krutak
2016-09-16 18:34     ` kbuild test robot
2016-09-16  9:12   ` [PATCH v3 04/12] ALSA: line6: Allow different channel numbers for in/out Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 05/12] ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during capture Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 06/12] ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer (int EP) Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 07/12] ALSA: line6: Allow processing of raw incoming messages Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 08/12] ALSA: line6: Add support for POD X3 Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 09/12] ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD X3) Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 10/12] ALSA: line6: Only determine control port properties if needed Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 11/12] ALSA: line6: Cleanup podhd initialization Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 12/12] ALSA: line6: Add hwdep interface to access the POD control messages Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 00/12] Line6 POD X3/X3Live suport Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 01/12] ALSA: line6: Enable different number of URBs for frame transfers Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 02/12] ALSA: line6: Add high-speed USB support Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 03/12] ALSA: line6: Support assymetrical in/out configurations Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 04/12] ALSA: line6: Allow different channel numbers for in/out Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 05/12] ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during capture Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 06/12] ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer (int EP) Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 07/12] ALSA: line6: Allow processing of raw incoming messages Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 08/12] ALSA: line6: Add support for POD X3 Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 09/12] ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD X3) Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 10/12] ALSA: line6: Only determine control port properties if needed Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 11/12] ALSA: line6: Cleanup podhd initialization Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 12/12] ALSA: line6: Add hwdep interface to access the POD control messages Andrej Krutak
2016-09-19 21:06     ` Takashi Iwai
2016-09-19 21:07   ` [PATCH v4 00/12] Line6 POD X3/X3Live suport Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1470942147-19848-13-git-send-email-dev@andree.sk \
    --to=dev@andree.sk \
    --cc=alsa-devel@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).