From: Andrej Krutak <dev@andree.sk>
To: tiwai@suse.com, perex@perex.cz, stefanha@gmail.com,
grabner@icg.tugraz.at, alsa-devel@alsa-project.org
Cc: Andrej Krutak <dev@andree.sk>
Subject: [PATCH v3 10/12] ALSA: line6: Only determine control port properties if needed
Date: Fri, 16 Sep 2016 11:12:54 +0200 [thread overview]
Message-ID: <1474017177-23769-11-git-send-email-dev@andree.sk> (raw)
In-Reply-To: <1474017177-23769-1-git-send-email-dev@andree.sk>
Not all line6 devices use the control port.
Signed-off-by: Andrej Krutak <dev@andree.sk>
---
sound/usb/line6/driver.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c
index 853a143..8a71d45 100644
--- a/sound/usb/line6/driver.c
+++ b/sound/usb/line6/driver.c
@@ -612,9 +612,8 @@ int line6_probe(struct usb_interface *interface,
goto error;
}
- line6_get_interval(line6);
-
if (properties->capabilities & LINE6_CAP_CONTROL) {
+ line6_get_interval(line6);
ret = line6_init_cap_control(line6);
if (ret < 0)
goto error;
--
1.9.1
next prev parent reply other threads:[~2016-09-16 9:13 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-11 19:02 [PATCH 00/15] Line6 POD X3/X3Live suport Andrej Krutak
2016-08-11 19:02 ` [PATCH 01/15] ALSA: line6: Make driver configuration more generic Andrej Krutak
2016-08-12 8:24 ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 02/15] ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during capture Andrej Krutak
2016-08-11 19:02 ` [PATCH 03/15] ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer (int EP) Andrej Krutak
2016-08-11 19:02 ` [PATCH 04/15] ALSA: line6: Add support for POD X3 Andrej Krutak
2016-08-11 19:02 ` [PATCH 05/15] ALSA: line6: Use device_create_file instead of snd_card_add_dev_attr Andrej Krutak
2016-08-12 8:26 ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 06/15] ALSA: line6: Allow bulk endpoints instead of interrupt endpoints Andrej Krutak
2016-08-11 19:02 ` [PATCH 07/15] ALSA: line6: Allow processing of raw incoming messages Andrej Krutak
2016-08-11 19:02 ` [PATCH 08/15] ALSA: line6: Cleanup initialization Andrej Krutak
2016-08-11 19:02 ` [PATCH 09/15] ALSA: line6: Add hwdep interface to access the POD control messages Andrej Krutak
2016-08-12 8:44 ` Takashi Iwai
2016-08-12 11:10 ` Andrej Kruták
2016-08-12 12:03 ` Takashi Iwai
2016-08-12 12:15 ` Andrej Kruták
2016-08-12 12:30 ` Takashi Iwai
2016-08-12 16:43 ` Andrej Kruták
2016-08-12 20:01 ` Takashi Iwai
2016-08-14 7:59 ` Andrej Kruták
2016-08-11 19:02 ` [PATCH 10/15] ALSA: line6: Add proper locks for hwdep open/release/read Andrej Krutak
2016-08-12 8:44 ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 11/15] ALSA: line6: Only free buffer if it is set Andrej Krutak
2016-08-12 8:45 ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 12/15] ALSA: line6: Give up on the lock while URBs are released Andrej Krutak
2016-08-12 8:45 ` Takashi Iwai
2016-08-12 11:14 ` Andrej Kruták
2016-08-12 12:04 ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 13/15] ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD X3) Andrej Krutak
2016-08-11 19:02 ` [PATCH 14/15] ALSA: line6: Give up hwdep spinlock temporarily during read operation Andrej Krutak
2016-08-12 8:46 ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 15/15] ALSA: line6: Remove double line6_pcm_release() after failed acquire Andrej Krutak
2016-08-12 8:46 ` Takashi Iwai
2016-08-12 8:14 ` [PATCH 00/15] Line6 POD X3/X3Live suport Takashi Iwai
2016-08-12 10:31 ` Andrej Kruták
2016-08-18 22:20 ` [PATCH v2 0/9] " Andrej Krutak
2016-08-18 22:20 ` [PATCH v2 1/9] ALSA: line6: Make driver configuration more generic Andrej Krutak
2016-08-24 14:50 ` Takashi Iwai
2016-08-18 22:20 ` [PATCH v2 2/9] ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during capture Andrej Krutak
2016-08-24 14:53 ` Takashi Iwai
2016-08-18 22:20 ` [PATCH v2 3/9] ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer (int EP) Andrej Krutak
2016-08-24 14:56 ` Takashi Iwai
2016-08-18 22:20 ` [PATCH v2 4/9] ALSA: line6: Add support for POD X3 Andrej Krutak
2016-08-18 22:20 ` [PATCH v2 5/9] ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD X3) Andrej Krutak
2016-08-18 22:20 ` [PATCH v2 6/9] ALSA: line6: Allow bulk endpoints instead of interrupt endpoints Andrej Krutak
2016-08-24 15:02 ` Takashi Iwai
2016-08-18 22:20 ` [PATCH v2 7/9] ALSA: line6: Allow processing of raw incoming messages Andrej Krutak
2016-08-24 15:05 ` Takashi Iwai
2016-08-30 14:35 ` Andrej Kruták
2016-08-18 22:20 ` [PATCH v2 8/9] ALSA: line6: Cleanup initialization Andrej Krutak
2016-08-24 15:06 ` Takashi Iwai
2016-08-18 22:20 ` [PATCH v2 9/9] ALSA: line6: Add hwdep interface to access the POD control messages Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 00/12] Line6 POD X3/X3Live suport Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 01/12] ALSA: line6: Enable different number of URBs for frame transfers Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 02/12] ALSA: line6: Add high-speed USB support Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 03/12] ALSA: line6: Support assymetrical in/out configurations Andrej Krutak
2016-09-16 18:34 ` kbuild test robot
2016-09-16 9:12 ` [PATCH v3 04/12] ALSA: line6: Allow different channel numbers for in/out Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 05/12] ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during capture Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 06/12] ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer (int EP) Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 07/12] ALSA: line6: Allow processing of raw incoming messages Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 08/12] ALSA: line6: Add support for POD X3 Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 09/12] ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD X3) Andrej Krutak
2016-09-16 9:12 ` Andrej Krutak [this message]
2016-09-16 9:12 ` [PATCH v3 11/12] ALSA: line6: Cleanup podhd initialization Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 12/12] ALSA: line6: Add hwdep interface to access the POD control messages Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 00/12] Line6 POD X3/X3Live suport Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 01/12] ALSA: line6: Enable different number of URBs for frame transfers Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 02/12] ALSA: line6: Add high-speed USB support Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 03/12] ALSA: line6: Support assymetrical in/out configurations Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 04/12] ALSA: line6: Allow different channel numbers for in/out Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 05/12] ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during capture Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 06/12] ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer (int EP) Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 07/12] ALSA: line6: Allow processing of raw incoming messages Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 08/12] ALSA: line6: Add support for POD X3 Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 09/12] ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD X3) Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 10/12] ALSA: line6: Only determine control port properties if needed Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 11/12] ALSA: line6: Cleanup podhd initialization Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 12/12] ALSA: line6: Add hwdep interface to access the POD control messages Andrej Krutak
2016-09-19 21:06 ` Takashi Iwai
2016-09-19 21:07 ` [PATCH v4 00/12] Line6 POD X3/X3Live suport Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474017177-23769-11-git-send-email-dev@andree.sk \
--to=dev@andree.sk \
--cc=alsa-devel@alsa-project.org \
--cc=grabner@icg.tugraz.at \
--cc=perex@perex.cz \
--cc=stefanha@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).