From: Andrej Krutak <dev@andree.sk>
To: tiwai@suse.com, perex@perex.cz, stefanha@gmail.com,
grabner@icg.tugraz.at, alsa-devel@alsa-project.org
Cc: Andrej Krutak <dev@andree.sk>
Subject: [PATCH v3 03/12] ALSA: line6: Support assymetrical in/out configurations
Date: Fri, 16 Sep 2016 11:12:47 +0200 [thread overview]
Message-ID: <1474017177-23769-4-git-send-email-dev@andree.sk> (raw)
In-Reply-To: <1474017177-23769-1-git-send-email-dev@andree.sk>
Splits max_packet_size to max_packet_size_in/out (e.g. for
different channel counts).
Signed-off-by: Andrej Krutak <dev@andree.sk>
---
sound/usb/line6/capture.c | 10 +++++-----
sound/usb/line6/pcm.c | 28 ++++++++++++++++------------
sound/usb/line6/pcm.h | 5 +++--
sound/usb/line6/playback.c | 2 +-
4 files changed, 25 insertions(+), 20 deletions(-)
diff --git a/sound/usb/line6/capture.c b/sound/usb/line6/capture.c
index 44e9a8c..73cea26 100644
--- a/sound/usb/line6/capture.c
+++ b/sound/usb/line6/capture.c
@@ -44,13 +44,13 @@ static int submit_audio_in_urb(struct snd_line6_pcm *line6pcm)
struct usb_iso_packet_descriptor *fin =
&urb_in->iso_frame_desc[i];
fin->offset = urb_size;
- fin->length = line6pcm->max_packet_size;
- urb_size += line6pcm->max_packet_size;
+ fin->length = line6pcm->max_packet_size_in;
+ urb_size += line6pcm->max_packet_size_in;
}
urb_in->transfer_buffer =
line6pcm->in.buffer +
- index * LINE6_ISO_PACKETS * line6pcm->max_packet_size;
+ index * LINE6_ISO_PACKETS * line6pcm->max_packet_size_in;
urb_in->transfer_buffer_length = urb_size;
urb_in->context = line6pcm;
@@ -173,10 +173,10 @@ static void audio_in_callback(struct urb *urb)
fbuf = urb->transfer_buffer + fin->offset;
fsize = fin->actual_length;
- if (fsize > line6pcm->max_packet_size) {
+ if (fsize > line6pcm->max_packet_size_in) {
dev_err(line6pcm->line6->ifcdev,
"driver and/or device bug: packet too large (%d > %d)\n",
- fsize, line6pcm->max_packet_size);
+ fsize, line6pcm->max_packet_size_in);
}
length += fsize;
diff --git a/sound/usb/line6/pcm.c b/sound/usb/line6/pcm.c
index 6c9b7cf..5fc1394 100644
--- a/sound/usb/line6/pcm.c
+++ b/sound/usb/line6/pcm.c
@@ -146,16 +146,20 @@ get_stream(struct snd_line6_pcm *line6pcm, int direction)
}
/* allocate a buffer if not opened yet;
- * call this in line6pcm.state_change mutex
+ * call this in line6pcm.state_mutex
*/
static int line6_buffer_acquire(struct snd_line6_pcm *line6pcm,
- struct line6_pcm_stream *pstr, int type)
+ struct line6_pcm_stream *pstr, int direction, int type)
{
+ const int pkt_size =
+ (direction == SNDRV_PCM_STREAM_PLAYBACK) ?
+ line6pcm->max_packet_size_out :
+ line6pcm->max_packet_size_in;
+
/* Invoked multiple times in a row so allocate once only */
if (!test_and_set_bit(type, &pstr->opened) && !pstr->buffer) {
pstr->buffer = kmalloc(line6pcm->line6->iso_buffers *
- LINE6_ISO_PACKETS *
- line6pcm->max_packet_size, GFP_KERNEL);
+ LINE6_ISO_PACKETS * pkt_size, GFP_KERNEL);
if (!pstr->buffer)
return -ENOMEM;
}
@@ -163,12 +167,11 @@ static int line6_buffer_acquire(struct snd_line6_pcm *line6pcm,
}
/* free a buffer if all streams are closed;
- * call this in line6pcm.state_change mutex
+ * call this in line6pcm.state_mutex
*/
static void line6_buffer_release(struct snd_line6_pcm *line6pcm,
struct line6_pcm_stream *pstr, int type)
{
-
clear_bit(type, &pstr->opened);
if (!pstr->opened) {
line6_wait_clear_audio_urbs(line6pcm, pstr);
@@ -195,6 +198,7 @@ static int line6_stream_start(struct snd_line6_pcm *line6pcm, int direction,
else
ret = line6_submit_audio_in_all_urbs(line6pcm);
}
+
if (ret < 0)
clear_bit(type, &pstr->running);
spin_unlock_irqrestore(&pstr->lock, flags);
@@ -530,12 +534,12 @@ int line6_init_pcm(struct usb_line6 *line6,
line6pcm->volume_monitor = 255;
line6pcm->line6 = line6;
- /* Read and write buffers are sized identically, so choose minimum */
- line6pcm->max_packet_size = min(
- usb_maxpacket(line6->usbdev,
- usb_rcvisocpipe(line6->usbdev, ep_read), 0),
- usb_maxpacket(line6->usbdev,
- usb_sndisocpipe(line6->usbdev, ep_write), 1));
+ line6pcm->max_packet_size_in =
+ usb_maxpacket(line6->usbdev,
+ usb_rcvisocpipe(line6->usbdev, ep_read), 0);
+ line6pcm->max_packet_size_out =
+ usb_maxpacket(line6->usbdev,
+ usb_sndisocpipe(line6->usbdev, ep_write), 1);
spin_lock_init(&line6pcm->out.lock);
spin_lock_init(&line6pcm->in.lock);
diff --git a/sound/usb/line6/pcm.h b/sound/usb/line6/pcm.h
index 38bf4df..f408d15 100644
--- a/sound/usb/line6/pcm.h
+++ b/sound/usb/line6/pcm.h
@@ -155,11 +155,12 @@ struct snd_line6_pcm {
/* Previously captured frame (for software monitoring) */
unsigned char *prev_fbuf;
- /* Size of previously captured frame (for software monitoring) */
+ /* Size of previously captured frame (for software monitoring/sync) */
int prev_fsize;
/* Maximum size of USB packet */
- int max_packet_size;
+ int max_packet_size_in;
+ int max_packet_size_out;
/* PCM playback volume (left and right) */
int volume_playback[2];
diff --git a/sound/usb/line6/playback.c b/sound/usb/line6/playback.c
index d53aad1..7b2644f 100644
--- a/sound/usb/line6/playback.c
+++ b/sound/usb/line6/playback.c
@@ -195,7 +195,7 @@ static int submit_audio_out_urb(struct snd_line6_pcm *line6pcm)
urb_frames = urb_size / bytes_per_frame;
urb_out->transfer_buffer =
line6pcm->out.buffer +
- index * LINE6_ISO_PACKETS * line6pcm->max_packet_size;
+ index * LINE6_ISO_PACKETS * line6pcm->max_packet_size_out;
urb_out->transfer_buffer_length = urb_size;
urb_out->context = line6pcm;
--
1.9.1
next prev parent reply other threads:[~2016-09-16 9:13 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-11 19:02 [PATCH 00/15] Line6 POD X3/X3Live suport Andrej Krutak
2016-08-11 19:02 ` [PATCH 01/15] ALSA: line6: Make driver configuration more generic Andrej Krutak
2016-08-12 8:24 ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 02/15] ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during capture Andrej Krutak
2016-08-11 19:02 ` [PATCH 03/15] ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer (int EP) Andrej Krutak
2016-08-11 19:02 ` [PATCH 04/15] ALSA: line6: Add support for POD X3 Andrej Krutak
2016-08-11 19:02 ` [PATCH 05/15] ALSA: line6: Use device_create_file instead of snd_card_add_dev_attr Andrej Krutak
2016-08-12 8:26 ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 06/15] ALSA: line6: Allow bulk endpoints instead of interrupt endpoints Andrej Krutak
2016-08-11 19:02 ` [PATCH 07/15] ALSA: line6: Allow processing of raw incoming messages Andrej Krutak
2016-08-11 19:02 ` [PATCH 08/15] ALSA: line6: Cleanup initialization Andrej Krutak
2016-08-11 19:02 ` [PATCH 09/15] ALSA: line6: Add hwdep interface to access the POD control messages Andrej Krutak
2016-08-12 8:44 ` Takashi Iwai
2016-08-12 11:10 ` Andrej Kruták
2016-08-12 12:03 ` Takashi Iwai
2016-08-12 12:15 ` Andrej Kruták
2016-08-12 12:30 ` Takashi Iwai
2016-08-12 16:43 ` Andrej Kruták
2016-08-12 20:01 ` Takashi Iwai
2016-08-14 7:59 ` Andrej Kruták
2016-08-11 19:02 ` [PATCH 10/15] ALSA: line6: Add proper locks for hwdep open/release/read Andrej Krutak
2016-08-12 8:44 ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 11/15] ALSA: line6: Only free buffer if it is set Andrej Krutak
2016-08-12 8:45 ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 12/15] ALSA: line6: Give up on the lock while URBs are released Andrej Krutak
2016-08-12 8:45 ` Takashi Iwai
2016-08-12 11:14 ` Andrej Kruták
2016-08-12 12:04 ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 13/15] ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD X3) Andrej Krutak
2016-08-11 19:02 ` [PATCH 14/15] ALSA: line6: Give up hwdep spinlock temporarily during read operation Andrej Krutak
2016-08-12 8:46 ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 15/15] ALSA: line6: Remove double line6_pcm_release() after failed acquire Andrej Krutak
2016-08-12 8:46 ` Takashi Iwai
2016-08-12 8:14 ` [PATCH 00/15] Line6 POD X3/X3Live suport Takashi Iwai
2016-08-12 10:31 ` Andrej Kruták
2016-08-18 22:20 ` [PATCH v2 0/9] " Andrej Krutak
2016-08-18 22:20 ` [PATCH v2 1/9] ALSA: line6: Make driver configuration more generic Andrej Krutak
2016-08-24 14:50 ` Takashi Iwai
2016-08-18 22:20 ` [PATCH v2 2/9] ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during capture Andrej Krutak
2016-08-24 14:53 ` Takashi Iwai
2016-08-18 22:20 ` [PATCH v2 3/9] ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer (int EP) Andrej Krutak
2016-08-24 14:56 ` Takashi Iwai
2016-08-18 22:20 ` [PATCH v2 4/9] ALSA: line6: Add support for POD X3 Andrej Krutak
2016-08-18 22:20 ` [PATCH v2 5/9] ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD X3) Andrej Krutak
2016-08-18 22:20 ` [PATCH v2 6/9] ALSA: line6: Allow bulk endpoints instead of interrupt endpoints Andrej Krutak
2016-08-24 15:02 ` Takashi Iwai
2016-08-18 22:20 ` [PATCH v2 7/9] ALSA: line6: Allow processing of raw incoming messages Andrej Krutak
2016-08-24 15:05 ` Takashi Iwai
2016-08-30 14:35 ` Andrej Kruták
2016-08-18 22:20 ` [PATCH v2 8/9] ALSA: line6: Cleanup initialization Andrej Krutak
2016-08-24 15:06 ` Takashi Iwai
2016-08-18 22:20 ` [PATCH v2 9/9] ALSA: line6: Add hwdep interface to access the POD control messages Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 00/12] Line6 POD X3/X3Live suport Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 01/12] ALSA: line6: Enable different number of URBs for frame transfers Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 02/12] ALSA: line6: Add high-speed USB support Andrej Krutak
2016-09-16 9:12 ` Andrej Krutak [this message]
2016-09-16 18:34 ` [PATCH v3 03/12] ALSA: line6: Support assymetrical in/out configurations kbuild test robot
2016-09-16 9:12 ` [PATCH v3 04/12] ALSA: line6: Allow different channel numbers for in/out Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 05/12] ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during capture Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 06/12] ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer (int EP) Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 07/12] ALSA: line6: Allow processing of raw incoming messages Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 08/12] ALSA: line6: Add support for POD X3 Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 09/12] ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD X3) Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 10/12] ALSA: line6: Only determine control port properties if needed Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 11/12] ALSA: line6: Cleanup podhd initialization Andrej Krutak
2016-09-16 9:12 ` [PATCH v3 12/12] ALSA: line6: Add hwdep interface to access the POD control messages Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 00/12] Line6 POD X3/X3Live suport Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 01/12] ALSA: line6: Enable different number of URBs for frame transfers Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 02/12] ALSA: line6: Add high-speed USB support Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 03/12] ALSA: line6: Support assymetrical in/out configurations Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 04/12] ALSA: line6: Allow different channel numbers for in/out Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 05/12] ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during capture Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 06/12] ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer (int EP) Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 07/12] ALSA: line6: Allow processing of raw incoming messages Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 08/12] ALSA: line6: Add support for POD X3 Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 09/12] ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD X3) Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 10/12] ALSA: line6: Only determine control port properties if needed Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 11/12] ALSA: line6: Cleanup podhd initialization Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 12/12] ALSA: line6: Add hwdep interface to access the POD control messages Andrej Krutak
2016-09-19 21:06 ` Takashi Iwai
2016-09-19 21:07 ` [PATCH v4 00/12] Line6 POD X3/X3Live suport Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474017177-23769-4-git-send-email-dev@andree.sk \
--to=dev@andree.sk \
--cc=alsa-devel@alsa-project.org \
--cc=grabner@icg.tugraz.at \
--cc=perex@perex.cz \
--cc=stefanha@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).