From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Mark Brown <broonie@kernel.org>, alsa-devel@alsa-project.org
Cc: Banajit Goswami <bgoswami@codeaurora.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
linux-kernel@vger.kernel.org,
Kenneth Westfield <kwestfie@codeaurora.org>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Subject: [PATCH v2 2/3] ASoC: lpass-platform: use dma_ch instead of rdma_ch/wrdma_ch
Date: Mon, 31 Oct 2016 11:25:44 +0000 [thread overview]
Message-ID: <1477913145-8259-3-git-send-email-srinivas.kandagatla@linaro.org> (raw)
In-Reply-To: <1477913145-8259-1-git-send-email-srinivas.kandagatla@linaro.org>
This patch cleans up usage of wrdma_ch and rdma_ch variables into a
common variable dma_ch, As there is no real use of tracking the dma
channel in two different variables based on stream direction.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Kenneth Westfield <kwestfie@codeaurora.org>
---
sound/soc/qcom/lpass-platform.c | 46 ++++++++---------------------------------
1 file changed, 9 insertions(+), 37 deletions(-)
diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c
index 07000f5..ca5e19f 100644
--- a/sound/soc/qcom/lpass-platform.c
+++ b/sound/soc/qcom/lpass-platform.c
@@ -25,8 +25,7 @@
#include "lpass.h"
struct lpass_pcm_data {
- int rdma_ch;
- int wrdma_ch;
+ int dma_ch;
int i2s_port;
};
@@ -91,10 +90,7 @@ static int lpass_platform_pcmops_open(struct snd_pcm_substream *substream)
return ret;
}
- if (dir == SNDRV_PCM_STREAM_PLAYBACK)
- data->rdma_ch = dma_ch;
- else
- data->wrdma_ch = dma_ch;
+ data->dma_ch = dma_ch;
snd_soc_set_runtime_hwparams(substream, &lpass_platform_pcm_hardware);
@@ -121,20 +117,12 @@ static int lpass_platform_pcmops_close(struct snd_pcm_substream *substream)
snd_soc_platform_get_drvdata(soc_runtime->platform);
struct lpass_variant *v = drvdata->variant;
struct lpass_pcm_data *data;
- int dma_ch, dir = substream->stream;
data = runtime->private_data;
v = drvdata->variant;
-
- if (dir == SNDRV_PCM_STREAM_PLAYBACK)
- dma_ch = data->rdma_ch;
- else
- dma_ch = data->wrdma_ch;
-
- drvdata->substream[dma_ch] = NULL;
-
+ drvdata->substream[data->dma_ch] = NULL;
if (v->free_dma_channel)
- v->free_dma_channel(drvdata, dma_ch);
+ v->free_dma_channel(drvdata, data->dma_ch);
return 0;
}
@@ -155,10 +143,7 @@ static int lpass_platform_pcmops_hw_params(struct snd_pcm_substream *substream,
int bitwidth;
int ret, dma_port = pcm_data->i2s_port + v->dmactl_audif_start;
- if (dir == SNDRV_PCM_STREAM_PLAYBACK)
- ch = pcm_data->rdma_ch;
- else
- ch = pcm_data->wrdma_ch;
+ ch = pcm_data->dma_ch;
bitwidth = snd_pcm_format_width(format);
if (bitwidth < 0) {
@@ -245,11 +230,7 @@ static int lpass_platform_pcmops_hw_free(struct snd_pcm_substream *substream)
unsigned int reg;
int ret;
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- reg = LPAIF_RDMACTL_REG(v, pcm_data->rdma_ch);
- else
- reg = LPAIF_WRDMACTL_REG(v, pcm_data->wrdma_ch);
-
+ reg = LPAIF_DMACTL_REG(v, pcm_data->dma_ch, substream->stream);
ret = regmap_write(drvdata->lpaif_map, reg, 0);
if (ret)
dev_err(soc_runtime->dev, "%s() error writing to rdmactl reg: %d\n",
@@ -269,10 +250,7 @@ static int lpass_platform_pcmops_prepare(struct snd_pcm_substream *substream)
struct lpass_variant *v = drvdata->variant;
int ret, ch, dir = substream->stream;
- if (dir == SNDRV_PCM_STREAM_PLAYBACK)
- ch = pcm_data->rdma_ch;
- else
- ch = pcm_data->wrdma_ch;
+ ch = pcm_data->dma_ch;
ret = regmap_write(drvdata->lpaif_map,
LPAIF_DMABASE_REG(v, ch, dir),
@@ -324,10 +302,7 @@ static int lpass_platform_pcmops_trigger(struct snd_pcm_substream *substream,
struct lpass_variant *v = drvdata->variant;
int ret, ch, dir = substream->stream;
- if (dir == SNDRV_PCM_STREAM_PLAYBACK)
- ch = pcm_data->rdma_ch;
- else
- ch = pcm_data->wrdma_ch;
+ ch = pcm_data->dma_ch;
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
@@ -402,10 +377,7 @@ static snd_pcm_uframes_t lpass_platform_pcmops_pointer(
unsigned int base_addr, curr_addr;
int ret, ch, dir = substream->stream;
- if (dir == SNDRV_PCM_STREAM_PLAYBACK)
- ch = pcm_data->rdma_ch;
- else
- ch = pcm_data->wrdma_ch;
+ ch = pcm_data->dma_ch;
ret = regmap_read(drvdata->lpaif_map,
LPAIF_DMABASE_REG(v, ch, dir), &base_addr);
--
2.10.1
next prev parent reply other threads:[~2016-10-31 11:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-31 11:25 [PATCH v2 0/3] ASoC: lpass-platform: Fixes and Cleanup Srinivas Kandagatla
2016-10-31 11:25 ` [PATCH v2 1/3] ASoC: lpass-platform: Fix broken pcm data usage Srinivas Kandagatla
2016-10-31 18:30 ` Applied "ASoC: lpass-platform: Fix broken pcm data usage" to the asoc tree Mark Brown
2016-10-31 11:25 ` Srinivas Kandagatla [this message]
2016-10-31 18:31 ` Applied "ASoC: lpass-platform: use dma_ch instead of rdma_ch/wrdma_ch" " Mark Brown
2016-10-31 11:25 ` [PATCH v2 3/3] ASoC: lpass-cpu: add module licence and description Srinivas Kandagatla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477913145-8259-3-git-send-email-srinivas.kandagatla@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=alsa-devel@alsa-project.org \
--cc=bgoswami@codeaurora.org \
--cc=broonie@kernel.org \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=kwestfie@codeaurora.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).