From: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
To: broonie@kernel.org
Cc: patches@opensource.wolfsonmicro.com, alsa-devel@alsa-project.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] ASoC: wm_adsp: Firmware controls should be added as codec controls
Date: Tue, 22 Nov 2016 16:58:57 +0000 [thread overview]
Message-ID: <1479833937-5238-2-git-send-email-rf@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1479833937-5238-1-git-send-email-rf@opensource.wolfsonmicro.com>
We were adding firmware controls as card controls (using
snd_soc_add_codec_controls). The DSP is part of a specific codec so
we should be adding them as codec controls. Adding as codec controls
also means that if the codec has a name_prefix it will be added to
the control name, which won't happen when adding as a card control.
As that was the only use of the card pointer in struct wm_adsp it can
be removed.
For ADSP2 codecs a wm_adsp2_codec_probe() was added since the original
control handling was written, and that's the logical place to store a
pointer to the codec rather than delaying it until the codec is
powered-up.
For ADSP1 we don't use a codec_probe() stage so the codec pointer
initialization replaces the original card pointer initialization in
wm_adsp1_event().
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
---
sound/soc/codecs/wm_adsp.c | 8 ++++----
sound/soc/codecs/wm_adsp.h | 2 +-
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c
index 7698273..6e6b9d8 100644
--- a/sound/soc/codecs/wm_adsp.c
+++ b/sound/soc/codecs/wm_adsp.c
@@ -1131,7 +1131,7 @@ static int wmfw_add_ctl(struct wm_adsp *dsp, struct wm_coeff_ctl *ctl)
break;
}
- ret = snd_soc_add_card_controls(dsp->card, kcontrol, 1);
+ ret = snd_soc_add_codec_controls(dsp->codec, kcontrol, 1);
if (ret < 0)
goto err_kcontrol;
@@ -2298,7 +2298,7 @@ int wm_adsp1_event(struct snd_soc_dapm_widget *w,
int ret;
unsigned int val;
- dsp->card = codec->component.card;
+ dsp->codec = codec;
mutex_lock(&dsp->pwr_lock);
@@ -2509,8 +2509,6 @@ int wm_adsp2_early_event(struct snd_soc_dapm_widget *w,
struct wm_adsp *dsp = &dsps[w->shift];
struct wm_coeff_ctl *ctl;
- dsp->card = codec->component.card;
-
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
wm_adsp2_set_dspclk(dsp, freq);
@@ -2628,6 +2626,8 @@ int wm_adsp2_event(struct snd_soc_dapm_widget *w,
int wm_adsp2_codec_probe(struct wm_adsp *dsp, struct snd_soc_codec *codec)
{
+ dsp->codec = codec;
+
wm_adsp2_init_debugfs(dsp, codec);
return snd_soc_add_codec_controls(codec,
diff --git a/sound/soc/codecs/wm_adsp.h b/sound/soc/codecs/wm_adsp.h
index 362dd7c..3f7c8ee 100644
--- a/sound/soc/codecs/wm_adsp.h
+++ b/sound/soc/codecs/wm_adsp.h
@@ -44,7 +44,7 @@ struct wm_adsp {
int type;
struct device *dev;
struct regmap *regmap;
- struct snd_soc_card *card;
+ struct snd_soc_codec *codec;
int base;
int sysclk_reg;
--
1.9.1
next prev parent reply other threads:[~2016-11-22 16:58 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-22 16:58 [PATCH 1/2] ASoC: wm_adsp: Remove unused wm_coeff_ctl.kcontrol Richard Fitzgerald
2016-11-22 16:58 ` Richard Fitzgerald [this message]
2016-11-22 17:26 ` Applied "ASoC: wm_adsp: Remove unused wm_coeff_ctl.kcontrol" to the asoc tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479833937-5238-2-git-send-email-rf@opensource.wolfsonmicro.com \
--to=rf@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).