From: Shrirang Bagul <shrirang.bagul@canonical.com>
To: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>
Subject: ASoC: Intel: Enabling LPE audio over I2S on Intel Atom E3815
Date: Wed, 23 Nov 2016 13:22:22 +0800 [thread overview]
Message-ID: <1479878542.5675.7.camel@canonical.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 1860 bytes --]
Hi,
I'm attempting to enable audio on Intel Atom E3815. I have a board with RT5660
codec from Realtek connected to the SoC over I2S2. The codec can be configured
over I2C bus. The board supports External Mic In and Line Out connections for
audio.
I am running Ubuntu 16.04 LTS with kernel v4.4.
To support RT5660 codec, I have backported patches -
d01580c ASoC: rt5660: enable MCLK detection
2b26dd4 ASoC: rt5660: add rt5660 codec driver
from https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
topic/rt5660 branch
To support I2S_CLK using MCLK I've also backported the patch to support PMC
platform clocks -
[13/17] clk: x86: Add Atom PMC platform clocks (https://patchwork.kernel.org/pat
ch/9277989/)
To understand the I2S over LPE architecture for audio I'm referring to the Intel
Atom Processor E3800: Datasheet (http://www.intel.com/content/dam/www/public/us/
en/documents/datasheets/atom-e3800-family-datasheet.pdf) and discussions on
alsa-devel mailing list thread: http://mailman.alsa-project.org/pipermail/alsa-d
evel/2015-November/100303.html
After implementing the machine driver byt-rt5660.c (by referring to byt-
rt5640.c), the CPU DAI baytrail-pcm-audio is registered successfully and the
fw_sst_0f28.bin-48kHz_i2s_master firmware also is loaded without any errors. It
is possible to configure the codec controls using alsamixer.
However, an attempt to record results in an empty PCM file and no audio is heard
if I try to playback using aplay.
I'm clueless on how to proceed from this point onward in getting the audio to
work on this board. The ouput of alsa-info.sh, clk_summary & gpio config from
debugfs and dmesg log is attached with this message. I have published the source
code here: http://kernel.ubuntu.com/git/snb/ubuntu-xenial.git/log/?h=x-master-au
dio-test
I would highly appreciate your help!
-Shrirang
[-- Attachment #2: logs.tar.bz2 --]
[-- Type: application/x-bzip-compressed-tar, Size: 31774 bytes --]
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
next reply other threads:[~2016-11-23 5:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-23 5:22 Shrirang Bagul [this message]
2016-11-24 12:18 ` ASoC: Intel: Enabling LPE audio over I2S on Intel Atom E3815 Liam Girdwood
2016-11-27 18:02 ` Pierre-Louis Bossart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479878542.5675.7.camel@canonical.com \
--to=shrirang.bagul@canonical.com \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).