alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: jeeja.kp@intel.com
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de, patches.audio@intel.com, broonie@kernel.org,
	liam.r.girdwood@intel.com, Jeeja KP <jeeja.kp@intel.com>
Subject: [PATCH v3 00/13] ASoC: Intel: Skylake: Driver updates
Date: Thu,  8 Dec 2016 13:41:11 +0530	[thread overview]
Message-ID: <1481184684-9620-1-git-send-email-jeeja.kp@intel.com> (raw)

From: Jeeja KP <jeeja.kp@intel.com>

This patch series includes driver updates for the handling scenarios 
during System S0/S3 transitions when audio stream is stopped during
system.
o move DMA configuration in DSP Gateway Module widget event handler to
ensure DMA is configured after resume. 
o Enable SSP MLCK using Supply widget. This will ensure the MCLK is
enabled when the widget is power on.
o Check DMA decouple register state before coupling/decoupling the DMA.
o In case of HDMI pass-through pipe, reset only the FE Pipe when stream
in in XRUN state.
o Resume the stream from HW renderer position.
o HDMI Codec pin and converter state need to be restored when stream
is resumed.

Changes in v2:
 - Addressed Mark's comment on patch 1, split this into 2 as this had
additional changes other than configuring the DMA.
 - Addressed Takashi's comment on the usage of snd_hdac_updatel() 

Changes in v3:
 - Addressed Takashi's comment on superfluous shit used in reading the
value of PPCTL register and also cleaned the condition for updating
the reg value.

Jeeja KP (13):
  ASoC: Intel: Skylake: Update link_index and format in pipe params
  ASoC: Intel: Skylake: Add helper function to setup host/link dma
  ASoC: Intel: Skylake: Configure DMA in PRE_PMD handler of Mixer
  ASoC: Intel: Skylake: Removed unused skl_get_format()
  ALSA: hda: check stream decoupled register state
  ASoC: Intel: Skylake: Add set_tristate DAI ops to enable SSP MCLK
  ASoC: Intel: Skylake: Remove unused SSP BE prepare DAI ops
  ASoC: Intel: Skylake: Add supply widget as non DSP widget
  ASoC: Intel: Skylake: Add supply widget in skl_nau_max machine
  ASoC: Intel: Skylake: Add supply widget in bxt_da_max machine
  ASoC: Intel: Skylake: Don't reset pass-through pipe in BE prepare
  ASoC: Intel: Skylake: set the resume point to LPIB
  ASoC: hdac_hdmi: Enable pin and converter in prepare

 sound/hda/ext/hdac_ext_stream.c                 |  15 +-
 sound/soc/codecs/hdac_hdmi.c                    |  28 ++--
 sound/soc/intel/boards/bxt_da7219_max98357a.c   |  34 ++++
 sound/soc/intel/boards/skl_nau88l25_max98357a.c |  34 ++++
 sound/soc/intel/skylake/skl-pcm.c               | 210 +++++++++++++-----------
 sound/soc/intel/skylake/skl-topology.c          |  27 ++-
 sound/soc/intel/skylake/skl-topology.h          |   6 +
 7 files changed, 240 insertions(+), 114 deletions(-)

-- 
2.5.0

             reply	other threads:[~2016-12-08  8:01 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-08  8:11 jeeja.kp [this message]
2016-12-08  8:11 ` [PATCH v3 01/13] ASoC: Intel: Skylake: Update link_index and format in pipe params jeeja.kp
2016-12-08  8:11 ` [PATCH v3 02/13] ASoC: Intel: Skylake: Add helper function to setup host/link dma jeeja.kp
2016-12-08  8:11 ` [PATCH v3 03/13] ASoC: Intel: Skylake: Configure DMA in PRE_PMD handler of Mixer jeeja.kp
2016-12-08  8:11 ` [PATCH v3 04/13] ASoC: Intel: Skylake: Removed unused skl_get_format() jeeja.kp
2016-12-08  8:11 ` [PATCH v3 05/13] ALSA: hda: check stream decoupled register state jeeja.kp
2016-12-16  8:34   ` Jeeja KP
2016-12-16 13:02     ` Mark Brown
2016-12-28 15:03     ` Takashi Iwai
2017-01-06 18:16   ` Applied "ALSA: hda: check stream decoupled register state" to the asoc tree Mark Brown
2016-12-08  8:11 ` [PATCH v3 06/13] ASoC: Intel: Skylake: Add set_tristate DAI ops to enable SSP MCLK jeeja.kp
2016-12-08  8:11 ` [PATCH v3 07/13] ASoC: Intel: Skylake: Remove unused SSP BE prepare DAI ops jeeja.kp
2016-12-08  8:11 ` [PATCH v3 08/13] ASoC: Intel: Skylake: Add supply widget as non DSP widget jeeja.kp
2016-12-08  8:11 ` [PATCH v3 09/13] ASoC: Intel: Skylake: Add supply widget in skl_nau_max machine jeeja.kp
2016-12-08  8:11 ` [PATCH v3 10/13] ASoC: Intel: Skylake: Add supply widget in bxt_da_max machine jeeja.kp
2016-12-08  8:11 ` [PATCH v3 11/13] ASoC: Intel: Skylake: Don't reset pass-through pipe in BE prepare jeeja.kp
2016-12-08  8:11 ` [PATCH v3 12/13] ASoC: Intel: Skylake: set the resume point to LPIB jeeja.kp
2016-12-08  8:11 ` [PATCH v3 13/13] ASoC: hdac_hdmi: Enable pin and converter in prepare jeeja.kp

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1481184684-9620-1-git-send-email-jeeja.kp@intel.com \
    --to=jeeja.kp@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=liam.r.girdwood@intel.com \
    --cc=patches.audio@intel.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).