alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: jeeja.kp@intel.com
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de, patches.audio@intel.com, broonie@kernel.org,
	liam.r.girdwood@intel.com, Jeeja KP <jeeja.kp@intel.com>
Subject: [PATCH v3 02/13] ASoC: Intel: Skylake: Add helper function to setup host/link dma
Date: Thu,  8 Dec 2016 13:41:13 +0530	[thread overview]
Message-ID: <1481184684-9620-3-git-send-email-jeeja.kp@intel.com> (raw)
In-Reply-To: <1481184684-9620-1-git-send-email-jeeja.kp@intel.com>

From: Jeeja KP <jeeja.kp@intel.com>

This patch adds helper function to configure the host/link DMA when
the DMA is in decoupled mode.
Next patch adds the usage of this helper routines for configuring
DMA in Mixer event handler.

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
---
 sound/soc/intel/skylake/skl-pcm.c      | 74 ++++++++++++++++++++++++++++++++++
 sound/soc/intel/skylake/skl-topology.h |  4 ++
 2 files changed, 78 insertions(+)

diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c
index 105aab7..8a7b6f7 100644
--- a/sound/soc/intel/skylake/skl-pcm.c
+++ b/sound/soc/intel/skylake/skl-pcm.c
@@ -137,6 +137,80 @@ static void skl_set_suspend_active(struct snd_pcm_substream *substream,
 		skl->supend_active--;
 }
 
+int skl_pcm_host_dma_prepare(struct device *dev, struct skl_pipe_params *params)
+{
+	struct hdac_ext_bus *ebus = dev_get_drvdata(dev);
+	struct hdac_bus *bus = ebus_to_hbus(ebus);
+	unsigned int format_val;
+	struct hdac_stream *hstream;
+	struct hdac_ext_stream *stream;
+	int err;
+
+	hstream = snd_hdac_get_stream(bus, params->stream,
+					params->host_dma_id + 1);
+	if (!hstream)
+		return -EINVAL;
+
+	stream = stream_to_hdac_ext_stream(hstream);
+	snd_hdac_ext_stream_decouple(ebus, stream, true);
+
+	format_val = snd_hdac_calc_stream_format(params->s_freq,
+				params->ch, params->format, 32, 0);
+
+	dev_dbg(dev, "format_val=%d, rate=%d, ch=%d, format=%d\n",
+		format_val, params->s_freq, params->ch, params->format);
+
+	snd_hdac_stream_reset(hdac_stream(stream));
+	err = snd_hdac_stream_set_params(hdac_stream(stream), format_val);
+	if (err < 0)
+		return err;
+
+	err = snd_hdac_stream_setup(hdac_stream(stream));
+	if (err < 0)
+		return err;
+
+	hdac_stream(stream)->prepared = 1;
+
+	return 0;
+}
+
+int skl_pcm_link_dma_prepare(struct device *dev, struct skl_pipe_params *params)
+{
+	struct hdac_ext_bus *ebus = dev_get_drvdata(dev);
+	struct hdac_bus *bus = ebus_to_hbus(ebus);
+	unsigned int format_val;
+	struct hdac_stream *hstream;
+	struct hdac_ext_stream *stream;
+	struct hdac_ext_link *link;
+
+	hstream = snd_hdac_get_stream(bus, params->stream,
+					params->link_dma_id + 1);
+	if (!hstream)
+		return -EINVAL;
+
+	stream = stream_to_hdac_ext_stream(hstream);
+	snd_hdac_ext_stream_decouple(ebus, stream, true);
+	format_val = snd_hdac_calc_stream_format(params->s_freq,
+				params->ch, params->format, 24, 0);
+
+	dev_dbg(dev, "format_val=%d, rate=%d, ch=%d, format=%d\n",
+		format_val, params->s_freq, params->ch, params->format);
+
+	snd_hdac_ext_link_stream_reset(stream);
+
+	snd_hdac_ext_link_stream_setup(stream, format_val);
+
+	list_for_each_entry(link, &ebus->hlink_list, list) {
+		if (link->index == params->link_index)
+			snd_hdac_ext_link_set_stream_id(link,
+					hstream->stream_tag);
+	}
+
+	stream->link_prepared = 1;
+
+	return 0;
+}
+
 static int skl_pcm_open(struct snd_pcm_substream *substream,
 		struct snd_soc_dai *dai)
 {
diff --git a/sound/soc/intel/skylake/skl-topology.h b/sound/soc/intel/skylake/skl-topology.h
index 405765f..a0d3158 100644
--- a/sound/soc/intel/skylake/skl-topology.h
+++ b/sound/soc/intel/skylake/skl-topology.h
@@ -385,4 +385,8 @@ int skl_get_module_params(struct skl_sst *ctx, u32 *params, int size,
 struct skl_module_cfg *skl_tplg_be_get_cpr_module(struct snd_soc_dai *dai,
 								int stream);
 enum skl_bitdepth skl_get_bit_depth(int params);
+int skl_pcm_host_dma_prepare(struct device *dev,
+			struct skl_pipe_params *params);
+int skl_pcm_link_dma_prepare(struct device *dev,
+			struct skl_pipe_params *params);
 #endif
-- 
2.5.0

  parent reply	other threads:[~2016-12-08  8:01 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-08  8:11 [PATCH v3 00/13] ASoC: Intel: Skylake: Driver updates jeeja.kp
2016-12-08  8:11 ` [PATCH v3 01/13] ASoC: Intel: Skylake: Update link_index and format in pipe params jeeja.kp
2016-12-08  8:11 ` jeeja.kp [this message]
2016-12-08  8:11 ` [PATCH v3 03/13] ASoC: Intel: Skylake: Configure DMA in PRE_PMD handler of Mixer jeeja.kp
2016-12-08  8:11 ` [PATCH v3 04/13] ASoC: Intel: Skylake: Removed unused skl_get_format() jeeja.kp
2016-12-08  8:11 ` [PATCH v3 05/13] ALSA: hda: check stream decoupled register state jeeja.kp
2016-12-16  8:34   ` Jeeja KP
2016-12-16 13:02     ` Mark Brown
2016-12-28 15:03     ` Takashi Iwai
2017-01-06 18:16   ` Applied "ALSA: hda: check stream decoupled register state" to the asoc tree Mark Brown
2016-12-08  8:11 ` [PATCH v3 06/13] ASoC: Intel: Skylake: Add set_tristate DAI ops to enable SSP MCLK jeeja.kp
2016-12-08  8:11 ` [PATCH v3 07/13] ASoC: Intel: Skylake: Remove unused SSP BE prepare DAI ops jeeja.kp
2016-12-08  8:11 ` [PATCH v3 08/13] ASoC: Intel: Skylake: Add supply widget as non DSP widget jeeja.kp
2016-12-08  8:11 ` [PATCH v3 09/13] ASoC: Intel: Skylake: Add supply widget in skl_nau_max machine jeeja.kp
2016-12-08  8:11 ` [PATCH v3 10/13] ASoC: Intel: Skylake: Add supply widget in bxt_da_max machine jeeja.kp
2016-12-08  8:11 ` [PATCH v3 11/13] ASoC: Intel: Skylake: Don't reset pass-through pipe in BE prepare jeeja.kp
2016-12-08  8:11 ` [PATCH v3 12/13] ASoC: Intel: Skylake: set the resume point to LPIB jeeja.kp
2016-12-08  8:11 ` [PATCH v3 13/13] ASoC: hdac_hdmi: Enable pin and converter in prepare jeeja.kp

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1481184684-9620-3-git-send-email-jeeja.kp@intel.com \
    --to=jeeja.kp@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=liam.r.girdwood@intel.com \
    --cc=patches.audio@intel.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).