From: jeeja.kp@intel.com
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de, patches.audio@intel.com, broonie@kernel.org,
liam.r.girdwood@intel.com, Jeeja KP <jeeja.kp@intel.com>
Subject: [PATCH 04/16] ASoC: hdac_hdmi: Add support for multiple ports to a PCM
Date: Tue, 7 Feb 2017 19:09:48 +0530 [thread overview]
Message-ID: <1486474800-11426-5-git-send-email-jeeja.kp@intel.com> (raw)
In-Reply-To: <1486474800-11426-1-git-send-email-jeeja.kp@intel.com>
From: Jeeja KP <jeeja.kp@intel.com>
Since we have the MST feature enabled and Pin-Port mux for user to
select the converter routing, multiple port mapping to same converter
needs to be supported.
To support multiple port mapped to same converter following changes are
done for this:.
o Add port list to pcm, so that multiple ports can be mapped to a PCM.
o Jack reporting in case where multiple port are attached to same PCM.
o Change hdac_hdmi_get_port_from_cvt(), channel_map, remove functions
to parse through all ports mapped to same the PCM.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
---
sound/soc/codecs/hdac_hdmi.c | 168 +++++++++++++++++++++++++++++--------------
1 file changed, 113 insertions(+), 55 deletions(-)
diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
index 6cf86a0a..f8b6e9f 100644
--- a/sound/soc/codecs/hdac_hdmi.c
+++ b/sound/soc/codecs/hdac_hdmi.c
@@ -89,6 +89,7 @@ struct hdac_hdmi_pin {
};
struct hdac_hdmi_port {
+ struct list_head head;
int id;
struct hdac_hdmi_pin *pin;
int num_mux_nids;
@@ -99,7 +100,7 @@ struct hdac_hdmi_port {
struct hdac_hdmi_pcm {
struct list_head head;
int pcm_id;
- struct hdac_hdmi_port *port;
+ struct list_head port_list;
struct hdac_hdmi_cvt *cvt;
struct snd_jack *jack;
int stream_tag;
@@ -108,6 +109,7 @@ struct hdac_hdmi_pcm {
bool chmap_set;
unsigned char chmap[8]; /* ALSA API channel-map */
struct mutex lock;
+ int jack_event;
};
struct hdac_hdmi_dai_port_map {
@@ -142,6 +144,37 @@ hdac_hdmi_get_pcm_from_cvt(struct hdac_hdmi_priv *hdmi,
return pcm;
}
+static void hdac_hdmi_jack_report(struct hdac_hdmi_pcm *pcm,
+ struct hdac_hdmi_port *port, bool is_connect)
+{
+ struct hdac_ext_device *edev = port->pin->edev;
+
+ if (is_connect) {
+ /*
+ * Report Jack connect event when a device is connected
+ * for the first time where same PCM is attached to multiple
+ * ports.
+ */
+ if (pcm->jack_event == 0) {
+ dev_dbg(&edev->hdac.dev,
+ "jack report for pcm=%d\n",
+ pcm->pcm_id);
+ snd_jack_report(pcm->jack, SND_JACK_AVOUT);
+ }
+ pcm->jack_event++;
+ } else {
+ /*
+ * Report Jack disconnect event when a device is disconnected
+ * is the only last connected device when same PCM is attached
+ * to multiple ports.
+ */
+ if (pcm->jack_event == 1)
+ snd_jack_report(pcm->jack, 0);
+ if (pcm->jack_event > 0)
+ pcm->jack_event--;
+ }
+}
+
/* MST supported verbs */
/*
* Get the no devices that can be connected to a port on the Pin widget.
@@ -484,19 +517,24 @@ static struct hdac_hdmi_port *hdac_hdmi_get_port_from_cvt(
list_for_each_entry(pcm, &hdmi->pcm_list, head) {
if (pcm->cvt == cvt) {
- port = pcm->port;
- break;
- }
- }
-
- if (port) {
- ret = hdac_hdmi_query_port_connlist(edev, port->pin, port);
- if (ret < 0)
- return NULL;
+ if (list_empty(&pcm->port_list))
+ continue;
- for (i = 0; i < port->num_mux_nids; i++) {
- if (port->mux_nids[i] == cvt->nid)
- return port;
+ list_for_each_entry(port, &pcm->port_list, head) {
+ mutex_lock(&pcm->lock);
+ ret = hdac_hdmi_query_port_connlist(edev,
+ port->pin, port);
+ mutex_unlock(&pcm->lock);
+ if (ret < 0)
+ continue;
+
+ for (i = 0; i < port->num_mux_nids; i++) {
+ if (port->mux_nids[i] == cvt->nid &&
+ port->eld.monitor_present &&
+ port->eld.eld_valid)
+ return port;
+ }
+ }
}
}
@@ -529,7 +567,6 @@ static int hdac_hdmi_pcm_open(struct snd_pcm_substream *substream,
*/
if (!port)
return 0;
-
if ((!port->eld.monitor_present) ||
(!port->eld.eld_valid)) {
@@ -645,13 +682,16 @@ static struct hdac_hdmi_pcm *hdac_hdmi_get_pcm(struct hdac_ext_device *edev,
{
struct hdac_hdmi_priv *hdmi = edev->private_data;
struct hdac_hdmi_pcm *pcm = NULL;
+ struct hdac_hdmi_port *p;
list_for_each_entry(pcm, &hdmi->pcm_list, head) {
- if (!pcm->port)
+ if (list_empty(&pcm->port_list))
continue;
- if (pcm->port == port)
- return pcm;
+ list_for_each_entry(p, &pcm->port_list, head) {
+ if (p->id == port->id && port->pin == p->pin)
+ return pcm;
+ }
}
return NULL;
@@ -802,6 +842,7 @@ static int hdac_hdmi_set_pin_port_mux(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
int ret;
+ struct hdac_hdmi_port *p, *p_next;
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
struct snd_soc_dapm_widget *w = snd_soc_dapm_kcontrol_widget(kcontrol);
struct snd_soc_dapm_context *dapm = w->dapm;
@@ -820,25 +861,30 @@ static int hdac_hdmi_set_pin_port_mux(struct snd_kcontrol *kcontrol,
mutex_lock(&hdmi->pin_mutex);
list_for_each_entry(pcm, &hdmi->pcm_list, head) {
- if (!pcm->port && pcm->port == port &&
- pcm->port->id == port->id)
- pcm->port = NULL;
+ if (list_empty(&pcm->port_list))
+ continue;
- /*
- * Jack status is not reported during device probe as the
- * PCMs are not registered by then. So report it here.
- */
- if (!strcmp(cvt_name, pcm->cvt->name) && !pcm->port) {
- pcm->port = port;
- if (port->eld.monitor_present && port->eld.eld_valid) {
- dev_dbg(&edev->hdac.dev,
- "jack report for pcm=%d\n",
- pcm->pcm_id);
+ list_for_each_entry_safe(p, p_next, &pcm->port_list, head) {
+ if (p == port && p->id == port->id &&
+ p->pin == port->pin) {
+ hdac_hdmi_jack_report(pcm, port, false);
+ list_del(&p->head);
+ }
+ }
+ }
- snd_jack_report(pcm->jack, SND_JACK_AVOUT);
+ /*
+ * Jack status is not reported during device probe as the
+ * PCMs are not registered by then. So report it here.
+ */
+ list_for_each_entry(pcm, &hdmi->pcm_list, head) {
+ if (!strcmp(cvt_name, pcm->cvt->name)) {
+ list_add_tail(&port->head, &pcm->port_list);
+ if (port->eld.monitor_present && port->eld.eld_valid) {
+ hdac_hdmi_jack_report(pcm, port, true);
+ mutex_unlock(&hdmi->pin_mutex);
+ return ret;
}
- mutex_unlock(&hdmi->pin_mutex);
- return ret;
}
}
mutex_unlock(&hdmi->pin_mutex);
@@ -1186,7 +1232,7 @@ static void hdac_hdmi_present_sense(struct hdac_hdmi_pin *pin,
if (!port->eld.monitor_present || !port->eld.eld_valid) {
- dev_dbg(&edev->hdac.dev, "%s: disconnect for pin:port %d:%d\n",
+ dev_err(&edev->hdac.dev, "%s: disconnect for pin:port %d:%d\n",
__func__, pin->nid, port->id);
/*
@@ -1194,25 +1240,16 @@ static void hdac_hdmi_present_sense(struct hdac_hdmi_pin *pin,
* report jack here. It will be done in usermode mux
* control select.
*/
- if (pcm) {
- dev_dbg(&edev->hdac.dev,
- "jack report for pcm=%d\n", pcm->pcm_id);
-
- snd_jack_report(pcm->jack, 0);
- }
+ if (pcm)
+ hdac_hdmi_jack_report(pcm, port, false);
mutex_unlock(&hdmi->pin_mutex);
return;
}
if (port->eld.monitor_present && port->eld.eld_valid) {
- if (pcm) {
- dev_dbg(&edev->hdac.dev,
- "jack report for pcm=%d\n",
- pcm->pcm_id);
-
- snd_jack_report(pcm->jack, SND_JACK_AVOUT);
- }
+ if (pcm)
+ hdac_hdmi_jack_report(pcm, port, true);
print_hex_dump_debug("ELD: ", DUMP_PREFIX_OFFSET, 16, 1,
port->eld.eld_buffer, port->eld.eld_size, false);
@@ -1540,8 +1577,9 @@ int hdac_hdmi_jack_init(struct snd_soc_dai *dai, int device)
return -ENOMEM;
pcm->pcm_id = device;
pcm->cvt = hdmi->dai_map[dai->id].cvt;
+ pcm->jack_event = 0;
mutex_init(&pcm->lock);
-
+ INIT_LIST_HEAD(&pcm->port_list);
snd_pcm = hdac_hdmi_get_pcm_from_id(dai->component->card, device);
if (snd_pcm) {
err = snd_hdac_add_chmap_ctls(snd_pcm, device, &hdmi->chmap);
@@ -1716,13 +1754,17 @@ static void hdac_hdmi_set_chmap(struct hdac_device *hdac, int pcm_idx,
struct hdac_ext_device *edev = to_ehdac_device(hdac);
struct hdac_hdmi_priv *hdmi = edev->private_data;
struct hdac_hdmi_pcm *pcm = get_hdmi_pcm_from_id(hdmi, pcm_idx);
- struct hdac_hdmi_port *port = pcm->port;
+ struct hdac_hdmi_port *port;
+
+ if (list_empty(&pcm->port_list))
+ return;
mutex_lock(&pcm->lock);
pcm->chmap_set = true;
memcpy(pcm->chmap, chmap, ARRAY_SIZE(pcm->chmap));
- if (prepared)
- hdac_hdmi_setup_audio_infoframe(edev, pcm, port);
+ list_for_each_entry(port, &pcm->port_list, head)
+ if (prepared)
+ hdac_hdmi_setup_audio_infoframe(edev, pcm, port);
mutex_unlock(&pcm->lock);
}
@@ -1731,9 +1773,11 @@ static bool is_hdac_hdmi_pcm_attached(struct hdac_device *hdac, int pcm_idx)
struct hdac_ext_device *edev = to_ehdac_device(hdac);
struct hdac_hdmi_priv *hdmi = edev->private_data;
struct hdac_hdmi_pcm *pcm = get_hdmi_pcm_from_id(hdmi, pcm_idx);
- struct hdac_hdmi_port *port = pcm->port;
- return port ? true:false;
+ if (list_empty(&pcm->port_list))
+ return false;
+
+ return true;
}
static int hdac_hdmi_get_spk_alloc(struct hdac_device *hdac, int pcm_idx)
@@ -1741,7 +1785,15 @@ static int hdac_hdmi_get_spk_alloc(struct hdac_device *hdac, int pcm_idx)
struct hdac_ext_device *edev = to_ehdac_device(hdac);
struct hdac_hdmi_priv *hdmi = edev->private_data;
struct hdac_hdmi_pcm *pcm = get_hdmi_pcm_from_id(hdmi, pcm_idx);
- struct hdac_hdmi_port *port = pcm->port;
+ struct hdac_hdmi_port *port;
+
+ if (list_empty(&pcm->port_list))
+ return 0;
+
+ port = list_first_entry(&pcm->port_list, struct hdac_hdmi_port, head);
+
+ if (!port)
+ return 0;
if (!port || !port->eld.eld_valid)
return 0;
@@ -1819,13 +1871,19 @@ static int hdac_hdmi_dev_remove(struct hdac_ext_device *edev)
struct hdac_hdmi_pin *pin, *pin_next;
struct hdac_hdmi_cvt *cvt, *cvt_next;
struct hdac_hdmi_pcm *pcm, *pcm_next;
+ struct hdac_hdmi_port *port;
int i;
snd_soc_unregister_codec(&edev->hdac.dev);
list_for_each_entry_safe(pcm, pcm_next, &hdmi->pcm_list, head) {
pcm->cvt = NULL;
- pcm->port = NULL;
+ if (list_empty(&pcm->port_list))
+ continue;
+
+ list_for_each_entry(port, &pcm->port_list, head)
+ port = NULL;
+
list_del(&pcm->head);
kfree(pcm);
}
--
2.5.0
next prev parent reply other threads:[~2017-02-07 13:28 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-07 13:39 [PATCH 00/16] ASoC: hdac_hdmi: Enable MST audio jeeja.kp
2017-02-07 13:39 ` [PATCH 01/16] ASoC: hdac_hdmi: Add MST verb support jeeja.kp
2017-02-07 13:39 ` [PATCH 02/16] ASoC: hdac_hdmi: Handle MST pin jack detection at boot/resume jeeja.kp
2017-02-07 13:39 ` [PATCH 03/16] ASoc: hdac_hdmi: Configure pin verbs for MST jeeja.kp
2017-02-07 13:39 ` jeeja.kp [this message]
2017-02-07 13:39 ` [PATCH 05/16] ASoC: hdac_hdmi: Use ASoC jack instead of snd_jack jeeja.kp
2017-02-07 13:39 ` [PATCH 06/16] ASoC: Intel: Skylake: Create ASoC jack for hdmi in rt286 machine jeeja.kp
2017-02-07 13:39 ` [PATCH 07/16] ASoC: Intel: Skylake: Create ASoC jack for hdmi in skl_nau88l25_max98357a machine jeeja.kp
2017-02-07 13:39 ` [PATCH 08/16] ASoC: Intel: Skylake: Create ASoC jack for hdmi in nau88l25_ssm4567 machine jeeja.kp
2017-02-07 13:39 ` [PATCH 09/16] ASoC: Intel: bxt: Create ASoC jack for hdmi in bxt_rt298 machine jeeja.kp
2017-02-07 13:39 ` [PATCH 10/16] ASoC: Intel: bxt: Create ASoC jack for hdmi in bxt_da7219_max98357 machine jeeja.kp
2017-02-07 13:39 ` [PATCH 11/16] ASoC: hdac_hdmi: Add machine pin widget for each port jeeja.kp
2017-02-07 13:39 ` [PATCH 12/16] ASoC: Intel: Skylake: Add jack port initialize in rt286 machine jeeja.kp
2017-02-07 13:39 ` [PATCH 13/16] ASoC: Intel: Skylake: Add jack port initialize in nau88l25_max98357a machine jeeja.kp
2017-02-07 13:39 ` [PATCH 14/16] ASoC: Intel: Skylake: Add jack port initialize in nau88l25_ssm4567 machine jeeja.kp
2017-02-07 13:39 ` [PATCH 15/16] ASoC: Intel: bxt: Add jack port initialize in bxt_rt298 machine jeeja.kp
2017-02-16 18:56 ` Mark Brown
2017-02-17 2:10 ` Vinod Koul
2017-02-17 8:51 ` Jeeja KP
2017-02-07 13:40 ` [PATCH 16/16] ASoC: Intel: bxt: Add jack port initialize in da7219_max98357a machine jeeja.kp
2017-02-13 9:07 ` [PATCH 00/16] ASoC: hdac_hdmi: Enable MST audio Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1486474800-11426-5-git-send-email-jeeja.kp@intel.com \
--to=jeeja.kp@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=liam.r.girdwood@intel.com \
--cc=patches.audio@intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).