From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de, vinod.koul@intel.com,
Adam.Thomson.Opensource@diasemi.com, broonie@kernel.org,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Subject: [PATCH 2/5] ASoC: Intel: add machine driver for BYT/CHT + DA7213
Date: Thu, 9 Mar 2017 18:18:59 -0600 [thread overview]
Message-ID: <1489105142-25878-3-git-send-email-pierre-louis.bossart@linux.intel.com> (raw)
In-Reply-To: <1489105142-25878-1-git-send-email-pierre-louis.bossart@linux.intel.com>
Add new machine driver, tested with Ard-Audio-DA7212 [1]
connected to MinnowBoardMAX Turbot.
The MCLK is managed by the codec driver using the "mclk" handle
to reuse existing code, but it could just as well be handled
by this machine driver.
[1] http://www.dialog-semiconductor.com/content/ard-audio-da7212
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
sound/soc/intel/Kconfig | 12 ++
sound/soc/intel/boards/Makefile | 2 +
sound/soc/intel/boards/bytcht_da7213.c | 283 +++++++++++++++++++++++++++++++++
3 files changed, 297 insertions(+)
create mode 100644 sound/soc/intel/boards/bytcht_da7213.c
diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig
index 526855a..8d32fc3 100644
--- a/sound/soc/intel/Kconfig
+++ b/sound/soc/intel/Kconfig
@@ -202,6 +202,18 @@ config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
platforms with MAX98090 audio codec it also can support TI jack chip as aux device.
If unsure select "N".
+config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
+ tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with DA7212/7213 codec"
+ depends on X86_INTEL_LPSS && I2C && ACPI
+ select SND_SOC_DA7213
+ select SND_SST_ATOM_HIFI2_PLATFORM
+ select SND_SST_IPC_ACPI
+ select SND_SOC_INTEL_SST_MATCH if ACPI
+ help
+ This adds support for ASoC machine driver for Intel(R) Baytrail & CherryTrail
+ platforms with DA7212/7213 audio codec.
+ If unsure select "N".
+
config SND_SOC_INTEL_SKYLAKE
tristate
select SND_HDA_EXT_CORE
diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile
index 5639f10..8a5d9ed 100644
--- a/sound/soc/intel/boards/Makefile
+++ b/sound/soc/intel/boards/Makefile
@@ -10,6 +10,7 @@ snd-soc-sst-bytcr-rt5651-objs := bytcr_rt5651.o
snd-soc-sst-cht-bsw-rt5672-objs := cht_bsw_rt5672.o
snd-soc-sst-cht-bsw-rt5645-objs := cht_bsw_rt5645.o
snd-soc-sst-cht-bsw-max98090_ti-objs := cht_bsw_max98090_ti.o
+snd-soc-sst-byt-cht-da7213-objs := bytcht_da7213.o
snd-soc-skl_rt286-objs := skl_rt286.o
snd-skl_nau88l25_max98357a-objs := skl_nau88l25_max98357a.o
snd-soc-skl_nau88l25_ssm4567-objs := skl_nau88l25_ssm4567.o
@@ -26,6 +27,7 @@ obj-$(CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH) += snd-soc-sst-bytcr-rt5651.o
obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH) += snd-soc-sst-cht-bsw-rt5672.o
obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH) += snd-soc-sst-cht-bsw-rt5645.o
obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH) += snd-soc-sst-cht-bsw-max98090_ti.o
+obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH) += snd-soc-sst-byt-cht-da7213.o
obj-$(CONFIG_SND_SOC_INTEL_SKL_RT286_MACH) += snd-soc-skl_rt286.o
obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH) += snd-skl_nau88l25_max98357a.o
obj-$(CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH) += snd-soc-skl_nau88l25_ssm4567.o
diff --git a/sound/soc/intel/boards/bytcht_da7213.c b/sound/soc/intel/boards/bytcht_da7213.c
new file mode 100644
index 0000000..18873e2
--- /dev/null
+++ b/sound/soc/intel/boards/bytcht_da7213.c
@@ -0,0 +1,283 @@
+/*
+ * bytcht-da7213.c - ASoc Machine driver for Intel Baytrail and
+ * Cherrytrail-based platforms, with Dialog DA7213 codec
+ *
+ * Copyright (C) 2017 Intel Corporation
+ * Author: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <asm/platform_sst_audio.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include "../../codecs/da7213.h"
+#include "../atom/sst-atom-controls.h"
+#include "../common/sst-acpi.h"
+
+static const struct snd_kcontrol_new controls[] = {
+ SOC_DAPM_PIN_SWITCH("Headphone Jack"),
+ SOC_DAPM_PIN_SWITCH("Headset Mic"),
+ SOC_DAPM_PIN_SWITCH("Mic"),
+ SOC_DAPM_PIN_SWITCH("Aux In"),
+};
+
+static const struct snd_soc_dapm_widget dapm_widgets[] = {
+ SND_SOC_DAPM_HP("Headphone Jack", NULL),
+ SND_SOC_DAPM_MIC("Headset Mic", NULL),
+ SND_SOC_DAPM_MIC("Mic", NULL),
+ SND_SOC_DAPM_LINE("Aux In", NULL),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+ {"Headphone Jack", NULL, "HPL"},
+ {"Headphone Jack", NULL, "HPR"},
+
+ {"AUXL", NULL, "Aux In"},
+ {"AUXR", NULL, "Aux In"},
+
+ /* Assume Mic1 is linked to Headset and Mic2 to on-board mic */
+ {"MIC1", NULL, "Headset Mic"},
+ {"MIC2", NULL, "Mic"},
+
+ /* SOC-codec link */
+ {"ssp2 Tx", NULL, "codec_out0"},
+ {"ssp2 Tx", NULL, "codec_out1"},
+ {"codec_in0", NULL, "ssp2 Rx"},
+ {"codec_in1", NULL, "ssp2 Rx"},
+
+ {"Playback", NULL, "ssp2 Tx"},
+ {"ssp2 Rx", NULL, "Capture"},
+};
+
+static int codec_fixup(struct snd_soc_pcm_runtime *rtd,
+ struct snd_pcm_hw_params *params)
+{
+ int ret;
+ struct snd_interval *rate = hw_param_interval(params,
+ SNDRV_PCM_HW_PARAM_RATE);
+ struct snd_interval *channels = hw_param_interval(params,
+ SNDRV_PCM_HW_PARAM_CHANNELS);
+
+ /* The DSP will convert the FE rate to 48k, stereo, 24bits */
+ rate->min = rate->max = 48000;
+ channels->min = channels->max = 2;
+
+ /* set SSP2 to 24-bit */
+ params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
+
+ /*
+ * Default mode for SSP configuration is TDM 4 slot, override config
+ * with explicit setting to I2S 2ch 24-bit. The word length is set with
+ * dai_set_tdm_slot() since there is no other API exposed
+ */
+ ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
+ SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0) {
+ dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret);
+ return ret;
+ }
+
+ ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24);
+ if (ret < 0) {
+ dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int aif1_startup(struct snd_pcm_substream *substream)
+{
+ return snd_pcm_hw_constraint_single(substream->runtime,
+ SNDRV_PCM_HW_PARAM_RATE, 48000);
+}
+
+static int aif1_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ int ret;
+
+ ret = snd_soc_dai_set_sysclk(codec_dai, DA7213_CLKSRC_MCLK,
+ 19200000, SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ dev_err(codec_dai->dev, "can't set codec sysclk configuration\n");
+
+ ret = snd_soc_dai_set_pll(codec_dai, 0,
+ DA7213_SYSCLK_PLL_SRM, 0, DA7213_PLL_FREQ_OUT_98304000);
+ if (ret < 0) {
+ dev_err(codec_dai->dev, "failed to start PLL: %d\n", ret);
+ return -EIO;
+ }
+
+ return ret;
+}
+
+static int aif1_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ int ret;
+
+ ret = snd_soc_dai_set_pll(codec_dai, 0,
+ DA7213_SYSCLK_MCLK, 0, 0);
+ if (ret < 0) {
+ dev_err(codec_dai->dev, "failed to stop PLL: %d\n", ret);
+ return -EIO;
+ }
+
+ return ret;
+}
+
+static const struct snd_soc_ops aif1_ops = {
+ .startup = aif1_startup,
+};
+
+static const struct snd_soc_ops ssp2_ops = {
+ .hw_params = aif1_hw_params,
+ .hw_free = aif1_hw_free,
+
+};
+
+static struct snd_soc_dai_link dailink[] = {
+ [MERR_DPCM_AUDIO] = {
+ .name = "Audio Port",
+ .stream_name = "Audio",
+ .cpu_dai_name = "media-cpu-dai",
+ .codec_dai_name = "snd-soc-dummy-dai",
+ .codec_name = "snd-soc-dummy",
+ .platform_name = "sst-mfld-platform",
+ .nonatomic = true,
+ .dynamic = 1,
+ .dpcm_playback = 1,
+ .dpcm_capture = 1,
+ .ops = &aif1_ops,
+ },
+ [MERR_DPCM_DEEP_BUFFER] = {
+ .name = "Deep-Buffer Audio Port",
+ .stream_name = "Deep-Buffer Audio",
+ .cpu_dai_name = "deepbuffer-cpu-dai",
+ .codec_dai_name = "snd-soc-dummy-dai",
+ .codec_name = "snd-soc-dummy",
+ .platform_name = "sst-mfld-platform",
+ .nonatomic = true,
+ .dynamic = 1,
+ .dpcm_playback = 1,
+ .ops = &aif1_ops,
+ },
+ [MERR_DPCM_COMPR] = {
+ .name = "Compressed Port",
+ .stream_name = "Compress",
+ .cpu_dai_name = "compress-cpu-dai",
+ .codec_dai_name = "snd-soc-dummy-dai",
+ .codec_name = "snd-soc-dummy",
+ .platform_name = "sst-mfld-platform",
+ },
+ /* CODEC<->CODEC link */
+ /* back ends */
+ {
+ .name = "SSP2-Codec",
+ .id = 1,
+ .cpu_dai_name = "ssp2-port",
+ .platform_name = "sst-mfld-platform",
+ .no_pcm = 1,
+ .codec_dai_name = "da7213-hifi",
+ .codec_name = "i2c-DLGS7213:00",
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+ | SND_SOC_DAIFMT_CBS_CFS,
+ .be_hw_params_fixup = codec_fixup,
+ .nonatomic = true,
+ .dpcm_playback = 1,
+ .dpcm_capture = 1,
+ .ops = &ssp2_ops,
+ },
+};
+
+/* SoC card */
+static struct snd_soc_card bytcht_da7213_card = {
+ .name = "bytcht-da7213",
+ .owner = THIS_MODULE,
+ .dai_link = dailink,
+ .num_links = ARRAY_SIZE(dailink),
+ .controls = controls,
+ .num_controls = ARRAY_SIZE(controls),
+ .dapm_widgets = dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(dapm_widgets),
+ .dapm_routes = audio_map,
+ .num_dapm_routes = ARRAY_SIZE(audio_map),
+};
+
+static char codec_name[16]; /* i2c-<HID>:00 with HID being 8 chars */
+
+static int bytcht_da7213_probe(struct platform_device *pdev)
+{
+ int ret_val = 0;
+ int i;
+ struct snd_soc_card *card;
+ struct sst_acpi_mach *mach;
+ const char *i2c_name = NULL;
+ int dai_index = 0;
+
+ mach = (&pdev->dev)->platform_data;
+ card = &bytcht_da7213_card;
+ card->dev = &pdev->dev;
+
+ /* fix index of codec dai */
+ dai_index = MERR_DPCM_COMPR + 1;
+ for (i = 0; i < ARRAY_SIZE(dailink); i++) {
+ if (!strcmp(dailink[i].codec_name, "i2c-DLGS7213:00")) {
+ dai_index = i;
+ break;
+ }
+ }
+
+ /* fixup codec name based on HID */
+ i2c_name = sst_acpi_find_name_from_hid(mach->id);
+ if (i2c_name != NULL) {
+ snprintf(codec_name, sizeof(codec_name),
+ "%s%s", "i2c-", i2c_name);
+ dailink[dai_index].codec_name = codec_name;
+ }
+
+ ret_val = devm_snd_soc_register_card(&pdev->dev, card);
+ if (ret_val) {
+ dev_err(&pdev->dev,
+ "snd_soc_register_card failed %d\n", ret_val);
+ return ret_val;
+ }
+ platform_set_drvdata(pdev, card);
+ return ret_val;
+}
+
+static struct platform_driver bytcht_da7213_driver = {
+ .driver = {
+ .name = "bytcht_da7213",
+ },
+ .probe = bytcht_da7213_probe,
+};
+module_platform_driver(bytcht_da7213_driver);
+
+MODULE_DESCRIPTION("ASoC Intel(R) Baytrail/Cherrytrail+DA7213 Machine driver");
+MODULE_AUTHOR("Pierre-Louis Bossart");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:bytcht_da7213");
--
2.7.4
next prev parent reply other threads:[~2017-03-10 0:19 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-10 0:18 [PATCH 0/5] MinnowBoard MAX support for DA7212 Pierre-Louis Bossart
2017-03-10 0:18 ` [PATCH 1/5] ASoC: da7213: add ACPI support Pierre-Louis Bossart
2017-03-13 16:10 ` Adam Thomson
2017-03-13 19:07 ` Pierre-Louis Bossart
2017-03-13 22:43 ` Adam Thomson
2017-03-13 16:58 ` Applied "ASoC: da7213: add ACPI support" to the asoc tree Mark Brown
2017-03-10 0:18 ` Pierre-Louis Bossart [this message]
2017-03-13 16:58 ` Applied "ASoC: Intel: add machine driver for BYT/CHT + DA7213" " Mark Brown
2017-03-10 0:19 ` [PATCH 3/5] ASoC: Intel: Atom: enable BYT/CHT+DA7213 machine driver Pierre-Louis Bossart
2017-03-13 16:58 ` Applied "ASoC: Intel: Atom: enable BYT/CHT+DA7213 machine driver" to the asoc tree Mark Brown
2017-03-10 0:19 ` [PATCH 4/5] ASoC: Intel: boards: add card for MinnowBoardMax/Up I2S access Pierre-Louis Bossart
2017-03-13 16:58 ` Applied "ASoC: Intel: boards: add card for MinnowBoardMax/Up I2S access" to the asoc tree Mark Brown
2017-03-10 0:19 ` [PATCH 5/5] ASoC: Intel: Enable bytcht_nocodec machine driver Pierre-Louis Bossart
2017-03-13 16:57 ` Applied "ASoC: Intel: Enable bytcht_nocodec machine driver" to the asoc tree Mark Brown
2017-03-10 4:17 ` [PATCH 0/5] MinnowBoard MAX support for DA7212 Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1489105142-25878-3-git-send-email-pierre-louis.bossart@linux.intel.com \
--to=pierre-louis.bossart@linux.intel.com \
--cc=Adam.Thomson.Opensource@diasemi.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=tiwai@suse.de \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).