From: "Subhransu S. Prusty" <subhransu.s.prusty@intel.com>
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de, lgirdwood@gmail.com,
Ramesh Babu <ramesh.babu@intel.com>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
patches.audio@intel.com, broonie@kernel.org,
"Subhransu S. Prusty" <subhransu.s.prusty@intel.com>
Subject: [PATCH v3] ALSA: core: let low-level driver or userspace disable rewinds
Date: Mon, 19 Jun 2017 11:52:37 +0530 [thread overview]
Message-ID: <1497853357-2931-1-git-send-email-subhransu.s.prusty@intel.com> (raw)
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Add new hw_params flag to explicitly tell driver that rewinds will never
be used. This can be used by low-level driver to optimize DMA operations
and reduce power consumption. Use this flag only when data written in
ring buffer will never be invalidated, e.g. any update of appl_ptr is
final.
Note that the update of appl_ptr include both a read/write data
operation as well as snd_pcm_forward() whose behavior is not modified.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ramesh Babu <ramesh.babu@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
---
v2 -> v3
return error for rewind operation if no_rewinds set.
include/sound/pcm.h | 1 +
include/uapi/sound/asound.h | 1 +
sound/core/pcm_native.c | 8 ++++++++
3 files changed, 10 insertions(+)
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index 79fedf517070..c1e2b87cd409 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -368,6 +368,7 @@ struct snd_pcm_runtime {
unsigned int rate_num;
unsigned int rate_den;
unsigned int no_period_wakeup: 1;
+ unsigned int no_rewinds:1;
/* -- SW params -- */
int tstamp_mode; /* mmap timestamp is updated */
diff --git a/include/uapi/sound/asound.h b/include/uapi/sound/asound.h
index fd41697cb4d3..c697ff90450d 100644
--- a/include/uapi/sound/asound.h
+++ b/include/uapi/sound/asound.h
@@ -365,6 +365,7 @@ struct snd_pcm_info {
#define SNDRV_PCM_HW_PARAMS_NORESAMPLE (1<<0) /* avoid rate resampling */
#define SNDRV_PCM_HW_PARAMS_EXPORT_BUFFER (1<<1) /* export buffer */
#define SNDRV_PCM_HW_PARAMS_NO_PERIOD_WAKEUP (1<<2) /* disable period wakeups */
+#define SNDRV_PCM_HW_PARAMS_NO_REWINDS (1<<3) /* disable rewinds */
struct snd_interval {
unsigned int min, max;
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index bf5d0f2acfb9..6769f4751fa0 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -554,6 +554,8 @@ static int snd_pcm_hw_params(struct snd_pcm_substream *substream,
runtime->no_period_wakeup =
(params->info & SNDRV_PCM_INFO_NO_PERIOD_WAKEUP) &&
(params->flags & SNDRV_PCM_HW_PARAMS_NO_PERIOD_WAKEUP);
+ runtime->no_rewinds =
+ (params->flags & SNDRV_PCM_HW_PARAMS_NO_REWINDS) ? 1 : 0;
bits = snd_pcm_format_physical_width(runtime->format);
runtime->sample_bits = bits;
@@ -2521,6 +2523,9 @@ static snd_pcm_sframes_t snd_pcm_playback_rewind(struct snd_pcm_substream *subst
if (frames == 0)
return 0;
+ if (runtime->no_rewinds)
+ return -ENODEV;
+
snd_pcm_stream_lock_irq(substream);
ret = do_pcm_hwsync(substream);
if (!ret)
@@ -2539,6 +2544,9 @@ static snd_pcm_sframes_t snd_pcm_capture_rewind(struct snd_pcm_substream *substr
if (frames == 0)
return 0;
+ if (runtime->no_rewinds)
+ return -ENODEV;
+
snd_pcm_stream_lock_irq(substream);
ret = do_pcm_hwsync(substream);
if (!ret)
--
1.9.1
next reply other threads:[~2017-06-19 6:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-19 6:22 Subhransu S. Prusty [this message]
2017-06-19 8:03 ` [PATCH v3] ALSA: core: let low-level driver or userspace disable rewinds Vinod Koul
2017-06-19 8:44 ` Takashi Iwai
2017-06-19 15:16 ` Pierre-Louis Bossart
2017-06-19 15:25 ` Takashi Iwai
2017-06-19 15:38 ` Pierre-Louis Bossart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1497853357-2931-1-git-send-email-subhransu.s.prusty@intel.com \
--to=subhransu.s.prusty@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=patches.audio@intel.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=ramesh.babu@intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox