From mboxrd@z Thu Jan 1 00:00:00 1970 From: Oder Chiou Subject: [PATCH] ASoC: rt5514: Move the auto disable DSP function to set_bias_level() Date: Tue, 4 Jul 2017 19:08:54 +0800 Message-ID: <1499166534-16438-1-git-send-email-oder_chiou@realtek.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from rtits2.realtek.com.tw (rtits2.realtek.com [211.75.126.72]) by alsa0.perex.cz (Postfix) with ESMTP id 4ADD7266884 for ; Tue, 4 Jul 2017 13:09:17 +0200 (CEST) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: broonie@kernel.org, lgirdwood@gmail.com Cc: Oder Chiou , jack.yu@realtek.com, alsa-devel@alsa-project.org, hychao@google.com, albertchen@realtek.com, shumingf@realtek.com, bardliao@realtek.com, flove@realtek.com List-Id: alsa-devel@alsa-project.org Move the auto disable DSP function from the widget event "DAPM Pre" to the set_bias_level() function to avoid the unexpected behavior. Signed-off-by: Oder Chiou --- sound/soc/codecs/rt5514.c | 49 +++++++++++++++++------------------------------ 1 file changed, 18 insertions(+), 31 deletions(-) diff --git a/sound/soc/codecs/rt5514.c b/sound/soc/codecs/rt5514.c index 1b6796c..a71e630 100644 --- a/sound/soc/codecs/rt5514.c +++ b/sound/soc/codecs/rt5514.c @@ -471,35 +471,6 @@ static int rt5514_is_sys_clk_from_pll(struct snd_soc_dapm_widget *source, return 0; } -static int rt5514_pre_event(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) -{ - struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); - struct rt5514_priv *rt5514 = snd_soc_codec_get_drvdata(codec); - - switch (event) { - case SND_SOC_DAPM_PRE_PMU: - /** - * If the DSP is enabled in start of recording, the DSP - * should be disabled, and sync back to normal recording - * settings to make sure recording properly. - */ - if (rt5514->dsp_enabled) { - rt5514->dsp_enabled = 0; - regmap_multi_reg_write(rt5514->i2c_regmap, - rt5514_i2c_patch, ARRAY_SIZE(rt5514_i2c_patch)); - regcache_mark_dirty(rt5514->regmap); - regcache_sync(rt5514->regmap); - } - break; - - default: - return 0; - } - - return 0; -} - static const struct snd_soc_dapm_widget rt5514_dapm_widgets[] = { /* Input Lines */ SND_SOC_DAPM_INPUT("DMIC1L"), @@ -607,8 +578,6 @@ static const struct snd_soc_dapm_widget rt5514_dapm_widgets[] = { /* Audio Interface */ SND_SOC_DAPM_AIF_OUT("AIF1TX", "AIF1 Capture", 0, SND_SOC_NOPM, 0, 0), - - SND_SOC_DAPM_PRE("DAPM Pre", rt5514_pre_event), }; static const struct snd_soc_dapm_route rt5514_dapm_routes[] = { @@ -975,6 +944,24 @@ static int rt5514_set_bias_level(struct snd_soc_codec *codec, } break; + case SND_SOC_BIAS_STANDBY: + if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) { + /* + * If the DSP is enabled in start of recording, the DSP + * should be disabled, and sync back to normal recording + * settings to make sure recording properly. + */ + if (rt5514->dsp_enabled) { + rt5514->dsp_enabled = 0; + regmap_multi_reg_write(rt5514->i2c_regmap, + rt5514_i2c_patch, + ARRAY_SIZE(rt5514_i2c_patch)); + regcache_mark_dirty(rt5514->regmap); + regcache_sync(rt5514->regmap); + } + } + break; + default: break; } -- 2.7.4