From: Vinod Koul <vinod.koul@intel.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: ALSA <alsa-devel@alsa-project.org>,
Charles Keepax <ckeepax@opensource.cirrus.com>,
Sudheer Papothi <spapothi@codeaurora.org>,
Takashi <tiwai@suse.de>,
plai@codeaurora.org, LKML <linux-kernel@vger.kernel.org>,
Pierre <pierre-louis.bossart@linux.intel.com>,
patches.audio@intel.com, Mark <broonie@kernel.org>,
srinivas.kandagatla@linaro.org,
Sagar Dharia <sdharia@codeaurora.org>,
alan@linux.intel.com
Subject: [PATCH v3 03/15] soundwire: Add Master registration
Date: Thu, 30 Nov 2017 15:26:58 +0530 [thread overview]
Message-ID: <1512035830-29161-4-git-send-email-vinod.koul@intel.com> (raw)
In-Reply-To: <1512035830-29161-1-git-send-email-vinod.koul@intel.com>
A Master registers with SoundWire bus and scans the firmware provided
for device description. In this patch we scan the ACPI namespaces and
create the SoundWire Slave devices based on the ACPI description
Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
drivers/soundwire/Makefile | 2 +-
drivers/soundwire/bus.c | 167 ++++++++++++++++++++++++++++++++++++++++++
drivers/soundwire/bus.h | 11 +++
drivers/soundwire/slave.c | 161 ++++++++++++++++++++++++++++++++++++++++
include/linux/soundwire/sdw.h | 11 +++
5 files changed, 351 insertions(+), 1 deletion(-)
create mode 100644 drivers/soundwire/bus.c
create mode 100644 drivers/soundwire/slave.c
diff --git a/drivers/soundwire/Makefile b/drivers/soundwire/Makefile
index d1281def7662..c875e434f8b3 100644
--- a/drivers/soundwire/Makefile
+++ b/drivers/soundwire/Makefile
@@ -3,5 +3,5 @@
#
#Bus Objs
-soundwire-bus-objs := bus_type.o
+soundwire-bus-objs := bus_type.o bus.o slave.o
obj-$(CONFIG_SOUNDWIRE_BUS) += soundwire-bus.o
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
new file mode 100644
index 000000000000..964f0400507c
--- /dev/null
+++ b/drivers/soundwire/bus.c
@@ -0,0 +1,167 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2015-17 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015-17 Intel Corporation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/mod_devicetable.h>
+#include <linux/soundwire/sdw.h>
+#include "bus.h"
+
+/**
+ * sdw_add_bus_master() - add a bus Master instance
+ * @bus: bus instance
+ *
+ * Initializes the bus instance, read properties and create child
+ * devices.
+ */
+int sdw_add_bus_master(struct sdw_bus *bus)
+{
+ int ret;
+
+ if (!bus->dev) {
+ pr_err("SoundWire bus has no device");
+ return -ENODEV;
+ }
+
+ mutex_init(&bus->bus_lock);
+ INIT_LIST_HEAD(&bus->slaves);
+
+ /*
+ * Device numbers in SoundWire are 0 thru 15 with 0 being
+ * Enumeration device number and 15 broadcast device number. So
+ * they are not used for assignment so mask these and other
+ * higher bits
+ */
+
+ /* Set higher order bits */
+ *bus->assigned = ~GENMASK(SDW_BROADCAST_DEV_NUM, SDW_ENUM_DEV_NUM);
+
+ /* Set device number and broadcast device number */
+ set_bit(SDW_ENUM_DEV_NUM, bus->assigned);
+ set_bit(SDW_BROADCAST_DEV_NUM, bus->assigned);
+
+ /*
+ * SDW is an enumerable bus, but devices can be powered off. So,
+ * they won't be able to report as present.
+ *
+ * Create Slave devices based on Slaves described in
+ * the respective firmware (ACPI/DT)
+ */
+ if (IS_ENABLED(CONFIG_ACPI) && ACPI_HANDLE(bus->dev))
+ ret = sdw_acpi_find_slaves(bus);
+ else
+ ret = -ENOTSUPP; /* No ACPI/DT so error out */
+
+ if (ret) {
+ dev_err(bus->dev, "Finding slaves failed:%d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(sdw_add_bus_master);
+
+static int sdw_delete_slave(struct device *dev, void *data)
+{
+ struct sdw_slave *slave = dev_to_sdw_dev(dev);
+ struct sdw_bus *bus = slave->bus;
+
+ mutex_lock(&bus->bus_lock);
+
+ if (slave->dev_num) /* clear dev_num if assigned */
+ clear_bit(slave->dev_num, bus->assigned);
+
+ list_del_init(&slave->node);
+ mutex_unlock(&bus->bus_lock);
+
+ device_unregister(dev);
+ return 0;
+}
+
+/**
+ * sdw_delete_bus_master() - delete the bus master instance
+ * @bus: bus to be deleted
+ *
+ * Remove the instance, delete the child devices.
+ */
+void sdw_delete_bus_master(struct sdw_bus *bus)
+{
+ device_for_each_child(bus->dev, NULL, sdw_delete_slave);
+}
+EXPORT_SYMBOL(sdw_delete_bus_master);
+
+void sdw_extract_slave_id(struct sdw_bus *bus,
+ u64 addr, struct sdw_slave_id *id)
+{
+ dev_dbg(bus->dev, "SDW Slave Addr: %llx", addr);
+
+ /*
+ * Spec definition
+ * Register Bit Contents
+ * DevId_0 [7:4] 47:44 sdw_version
+ * DevId_0 [3:0] 43:40 unique_id
+ * DevId_1 39:32 mfg_id [15:8]
+ * DevId_2 31:24 mfg_id [7:0]
+ * DevId_3 23:16 part_id [15:8]
+ * DevId_4 15:08 part_id [7:0]
+ * DevId_5 07:00 class_id
+ */
+ id->sdw_version = (addr >> 44) & GENMASK(3, 0);
+ id->unique_id = (addr >> 40) & GENMASK(3, 0);
+ id->mfg_id = (addr >> 24) & GENMASK(15, 0);
+ id->part_id = (addr >> 8) & GENMASK(15, 0);
+ id->class_id = addr & GENMASK(7, 0);
+
+ dev_dbg(bus->dev,
+ "SDW Slave class_id %x, part_id %x, mfg_id %x, unique_id %x, version %x",
+ id->class_id, id->part_id, id->mfg_id,
+ id->unique_id, id->sdw_version);
+
+}
diff --git a/drivers/soundwire/bus.h b/drivers/soundwire/bus.h
index 2af05b21961e..c7e8d89271a1 100644
--- a/drivers/soundwire/bus.h
+++ b/drivers/soundwire/bus.h
@@ -52,6 +52,17 @@
#ifndef __SDW_BUS_H
#define __SDW_BUS_H
+#if IS_ENABLED(CONFIG_ACPI)
+int sdw_acpi_find_slaves(struct sdw_bus *bus);
+#else
+static inline int sdw_acpi_find_slaves(struct sdw_bus *bus)
+{
+ return -ENOTSUPP;
+}
+#endif
+
int sdw_slave_modalias(const struct sdw_slave *slave, char *buf, size_t size);
+void sdw_extract_slave_id(struct sdw_bus *bus,
+ u64 addr, struct sdw_slave_id *id);
#endif /* __SDW_BUS_H */
diff --git a/drivers/soundwire/slave.c b/drivers/soundwire/slave.c
new file mode 100644
index 000000000000..42e3cbdff822
--- /dev/null
+++ b/drivers/soundwire/slave.c
@@ -0,0 +1,161 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2015-17 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015-17 Intel Corporation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/soundwire/sdw.h>
+#include "bus.h"
+
+static void sdw_slave_release(struct device *dev)
+{
+ struct sdw_slave *slave = dev_to_sdw_dev(dev);
+
+ kfree(slave);
+}
+
+static int sdw_slave_add(struct sdw_bus *bus,
+ struct sdw_slave_id *id, struct fwnode_handle *fwnode)
+{
+ struct sdw_slave *slave;
+ int ret;
+
+ slave = kzalloc(sizeof(*slave), GFP_KERNEL);
+ if (!slave)
+ return -ENOMEM;
+
+ /* Initialize data structure */
+ memcpy(&slave->id, id, sizeof(*id));
+ slave->dev.parent = bus->dev;
+ slave->dev.fwnode = fwnode;
+
+ /* name shall be sdw:link:mfg:part:class:unique */
+ dev_set_name(&slave->dev, "sdw:%x:%x:%x:%x:%x",
+ bus->link_id, id->mfg_id, id->part_id,
+ id->class_id, id->unique_id);
+
+ slave->dev.release = sdw_slave_release;
+ slave->dev.bus = &sdw_bus_type;
+ slave->bus = bus;
+ slave->status = SDW_SLAVE_UNATTACHED;
+ slave->dev_num = 0;
+
+ mutex_lock(&bus->bus_lock);
+ list_add_tail(&slave->node, &bus->slaves);
+ mutex_unlock(&bus->bus_lock);
+
+ ret = device_register(&slave->dev);
+ if (ret) {
+ dev_err(bus->dev, "Failed to add slave: ret %d\n", ret);
+
+ /*
+ * On err, don't free but drop ref as this will be freed
+ * when release method is invoked.
+ */
+ mutex_lock(&bus->bus_lock);
+ list_del(&slave->node);
+ mutex_unlock(&bus->bus_lock);
+ put_device(&slave->dev);
+ }
+
+ return ret;
+}
+
+#if IS_ENABLED(CONFIG_ACPI)
+/*
+ * sdw_acpi_find_slaves() - Find Slave devices in Master ACPI node
+ * @bus: SDW bus instance
+ *
+ * Scans Master ACPI node for SDW child Slave devices and registers it.
+ */
+int sdw_acpi_find_slaves(struct sdw_bus *bus)
+{
+ struct acpi_device *adev, *parent;
+
+ parent = ACPI_COMPANION(bus->dev);
+ if (!parent) {
+ dev_err(bus->dev, "Can't find parent for acpi bind\n");
+ return -ENODEV;
+ }
+
+ list_for_each_entry(adev, &parent->children, node) {
+ unsigned long long addr;
+ struct sdw_slave_id id;
+ unsigned int link_id;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(adev->handle,
+ METHOD_NAME__ADR, NULL, &addr);
+
+ if (ACPI_FAILURE(status)) {
+ dev_err(bus->dev, "_ADR resolution failed: %x\n",
+ status);
+ return status;
+ }
+
+ /* Extract link id from ADR, it is from 48 to 51 bits */
+ link_id = (addr >> 48) & GENMASK(3, 0);
+
+ /* Check for link_id match */
+ if (link_id != bus->link_id)
+ continue;
+
+ sdw_extract_slave_id(bus, addr, &id);
+
+ /*
+ * don't error check for sdw_slave_add as we want to continue
+ * adding Slaves
+ */
+ sdw_slave_add(bus, &id, acpi_fwnode_handle(adev));
+ }
+
+ return 0;
+}
+
+#endif
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index 96a59fd4834b..d87b0d4b399a 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -55,6 +55,14 @@
struct sdw_bus;
struct sdw_slave;
+/* SDW spec defines and enums, as defined by MIPI 1.1. Spec */
+
+/* SDW Broadcast Device Number */
+#define SDW_BROADCAST_DEV_NUM 15
+
+/* SDW Enumeration Device Number */
+#define SDW_ENUM_DEV_NUM 0
+
#define SDW_MAX_DEVICES 11
/**
@@ -163,4 +171,7 @@ struct sdw_bus {
struct mutex bus_lock;
};
+int sdw_add_bus_master(struct sdw_bus *bus);
+void sdw_delete_bus_master(struct sdw_bus *bus);
+
#endif /* __SOUNDWIRE_H */
--
2.7.4
next prev parent reply other threads:[~2017-11-30 9:53 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-30 9:56 [PATCH v3 00/15] soundwire: Add a new SoundWire subsystem Vinod Koul
2017-11-30 9:56 ` [PATCH v3 01/15] Documentation: Add SoundWire summary Vinod Koul
2017-11-30 9:56 ` [PATCH v3 02/15] soundwire: Add SoundWire bus type Vinod Koul
2017-11-30 11:42 ` Philippe Ombredanne
2017-11-30 12:31 ` Vinod Koul
2017-11-30 9:56 ` Vinod Koul [this message]
2017-11-30 9:56 ` [PATCH v3 04/15] soundwire: Add MIPI DisCo property helpers Vinod Koul
2017-11-30 9:57 ` [PATCH v3 05/15] soundwire: Add SoundWire MIPI defined registers Vinod Koul
2017-11-30 9:57 ` [PATCH v3 06/15] soundwire: Add IO transfer Vinod Koul
2017-11-30 9:57 ` [PATCH v3 07/15] regmap: Add SoundWire bus support Vinod Koul
2017-11-30 17:17 ` Mark Brown
2017-11-30 17:26 ` Vinod Koul
2017-11-30 9:57 ` [PATCH v3 08/15] soundwire: Add Slave status handling helpers Vinod Koul
2017-11-30 9:57 ` [PATCH v3 09/15] soundwire: Add slave status handling Vinod Koul
2017-11-30 9:57 ` [PATCH v3 10/15] soundwire: Add sysfs for SoundWire DisCo properties Vinod Koul
2017-11-30 9:57 ` [PATCH v3 11/15] soundwire: cdns: Add cadence library Vinod Koul
2017-11-30 9:57 ` [PATCH v3 12/15] soundwire: cdns: Add sdw_master_ops and IO transfer support Vinod Koul
2017-11-30 9:57 ` [PATCH v3 13/15] soundwire: intel: Add Intel Master driver Vinod Koul
2017-11-30 9:57 ` [PATCH v3 14/15] soundwire: intel: Add Intel init module Vinod Koul
2017-11-30 9:57 ` [PATCH v3 15/15] MAINTAINERS: Add SoundWire entry Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1512035830-29161-4-git-send-email-vinod.koul@intel.com \
--to=vinod.koul@intel.com \
--cc=alan@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=ckeepax@opensource.cirrus.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches.audio@intel.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=plai@codeaurora.org \
--cc=sdharia@codeaurora.org \
--cc=spapothi@codeaurora.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).