alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Sriram Periyasamy <sriramx.periyasamy@intel.com>
To: ALSA ML <alsa-devel@alsa-project.org>, Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>,
	Liam Girdwood <liam.r.girdwood@linux.intel.com>,
	Vinod Koul <vinod.koul@intel.com>,
	Patches Audio <patches.audio@intel.com>,
	mturquette@baylibre.com, sboyd@codeaurora.org,
	linux-clk@vger.kernel.org, Naveen M <naveen.m@intel.com>,
	Harsha Priya <harshapriya.n@intel.com>,
	"Subhransu S . Prusty" <subhransu.s.prusty@intel.com>,
	Sriram Periyasamy <sriramx.periyasamy@intel.com>
Subject: [alsa-devel] [PATCH v8 1/3] ASoC: Intel: eve: Enable mclk and ssp sclk early
Date: Mon, 29 Jan 2018 21:45:58 +0530	[thread overview]
Message-ID: <1517242560-22157-2-git-send-email-sriramx.periyasamy@intel.com> (raw)
In-Reply-To: <1517242560-22157-1-git-send-email-sriramx.periyasamy@intel.com>

From: Naveen M <naveen.m@intel.com>

rt5663 and rt5514 needs mclk/sclk early to synchronize its internal
clocks.

Signed-off-by: Naveen M <naveen.m@intel.com>
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
---
 sound/soc/intel/boards/Kconfig                     |  1 +
 .../soc/intel/boards/kbl_rt5663_rt5514_max98927.c  | 94 ++++++++++++++++++++++
 2 files changed, 95 insertions(+)

diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
index fefb1ee9fec6..a81214663a65 100644
--- a/sound/soc/intel/boards/Kconfig
+++ b/sound/soc/intel/boards/Kconfig
@@ -246,6 +246,7 @@ config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
         tristate "KBL with RT5663, RT5514 and MAX98927 in I2S Mode"
         depends on MFD_INTEL_LPSS && I2C && ACPI
         depends on SPI
+        select SND_SOC_INTEL_SKYLAKE_SSP_CLK
         select SND_SOC_RT5663
         select SND_SOC_RT5514
         select SND_SOC_RT5514_SPI
diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
index 90ea98f01c4c..ca081ed48e00 100644
--- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
+++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
@@ -30,6 +30,9 @@
 #include "../../codecs/rt5663.h"
 #include "../../codecs/hdac_hdmi.h"
 #include "../skylake/skl.h"
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
 
 #define KBL_REALTEK_CODEC_DAI "rt5663-aif"
 #define KBL_REALTEK_DMIC_CODEC_DAI "rt5514-aif1"
@@ -58,6 +61,8 @@ struct kbl_codec_private {
 	struct snd_soc_jack kabylake_headset;
 	struct list_head hdmi_pcm_list;
 	struct snd_soc_jack kabylake_hdmi[2];
+	struct clk *mclk;
+	struct clk *sclk;
 };
 
 enum {
@@ -79,6 +84,61 @@ static const struct snd_kcontrol_new kabylake_controls[] = {
 	SOC_DAPM_PIN_SWITCH("DMIC"),
 };
 
+static int platform_clock_control(struct snd_soc_dapm_widget *w,
+			struct snd_kcontrol *k, int  event)
+{
+	struct snd_soc_dapm_context *dapm = w->dapm;
+	struct snd_soc_card *card = dapm->card;
+	struct kbl_codec_private *priv = snd_soc_card_get_drvdata(card);
+	int ret = 0;
+
+	/*
+	 * MCLK/SCLK need to be ON early for a successful synchronization of
+	 * codec internal clock. And the clocks are turned off during
+	 * POST_PMD after the stream is stopped.
+	 */
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		/* Enable MCLK */
+		ret = clk_set_rate(priv->mclk, 24000000);
+		if (ret < 0) {
+			dev_err(card->dev, "Can't set rate for mclk, err: %d\n",
+				ret);
+			return ret;
+		}
+
+		ret = clk_prepare_enable(priv->mclk);
+		if (ret < 0) {
+			dev_err(card->dev, "Can't enable mclk, err: %d\n", ret);
+			return ret;
+		}
+
+		/* Enable SCLK */
+		ret = clk_set_rate(priv->sclk, 3072000);
+		if (ret < 0) {
+			dev_err(card->dev, "Can't set rate for sclk, err: %d\n",
+				ret);
+			clk_disable_unprepare(priv->mclk);
+			return ret;
+		}
+
+		ret = clk_prepare_enable(priv->sclk);
+		if (ret < 0) {
+			dev_err(card->dev, "Can't enable sclk, err: %d\n", ret);
+			clk_disable_unprepare(priv->mclk);
+		}
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		clk_disable_unprepare(priv->mclk);
+		clk_disable_unprepare(priv->sclk);
+		break;
+	default:
+		return 0;
+	}
+
+	return 0;
+}
+
 static const struct snd_soc_dapm_widget kabylake_widgets[] = {
 	SND_SOC_DAPM_HP("Headphone Jack", NULL),
 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
@@ -87,11 +147,15 @@ static const struct snd_soc_dapm_widget kabylake_widgets[] = {
 	SND_SOC_DAPM_MIC("DMIC", NULL),
 	SND_SOC_DAPM_SPK("HDMI1", NULL),
 	SND_SOC_DAPM_SPK("HDMI2", NULL),
+	SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
+			platform_clock_control, SND_SOC_DAPM_PRE_PMU |
+			SND_SOC_DAPM_POST_PMD),
 
 };
 
 static const struct snd_soc_dapm_route kabylake_map[] = {
 	/* Headphones */
+	{ "Headphone Jack", NULL, "Platform Clock" },
 	{ "Headphone Jack", NULL, "HPOL" },
 	{ "Headphone Jack", NULL, "HPOR" },
 
@@ -100,6 +164,7 @@ static const struct snd_soc_dapm_route kabylake_map[] = {
 	{ "Right Spk", NULL, "Right BE_OUT" },
 
 	/* other jacks */
+	{ "Headset Mic", NULL, "Platform Clock" },
 	{ "IN1P", NULL, "Headset Mic" },
 	{ "IN1N", NULL, "Headset Mic" },
 
@@ -650,6 +715,7 @@ static int kabylake_audio_probe(struct platform_device *pdev)
 {
 	struct kbl_codec_private *ctx;
 	struct skl_machine_pdata *pdata;
+	int ret = 0;
 
 	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_ATOMIC);
 	if (!ctx)
@@ -665,6 +731,34 @@ static int kabylake_audio_probe(struct platform_device *pdev)
 		dmic_constraints = pdata->dmic_num == 2 ?
 			&constraints_dmic_2ch : &constraints_dmic_channels;
 
+	ctx->mclk = devm_clk_get(&pdev->dev, "ssp1_mclk");
+	if (IS_ERR(ctx->mclk)) {
+		ret = PTR_ERR(ctx->mclk);
+		if (ret == -ENOENT) {
+			dev_info(&pdev->dev,
+				"Failed to get ssp1_mclk, defer probe\n");
+			return -EPROBE_DEFER;
+		}
+
+		dev_err(&pdev->dev, "Failed to get ssp1_mclk with err:%d\n",
+								ret);
+		return ret;
+	}
+
+	ctx->sclk = devm_clk_get(&pdev->dev, "ssp1_sclk");
+	if (IS_ERR(ctx->sclk)) {
+		ret = PTR_ERR(ctx->sclk);
+		if (ret == -ENOENT) {
+			dev_info(&pdev->dev,
+				"Failed to get ssp1_sclk, defer probe\n");
+			return -EPROBE_DEFER;
+		}
+
+		dev_err(&pdev->dev, "Failed to get ssp1_sclk with err:%d\n",
+								ret);
+		return ret;
+	}
+
 	return devm_snd_soc_register_card(&pdev->dev, &kabylake_audio_card);
 }
 
-- 
2.7.4


  reply	other threads:[~2018-01-29 16:15 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-29 16:15 [PATCH v8 0/3] ASoC: Intel: Skylake: Add a clk driver to enable ssp clks early Sriram Periyasamy
2018-01-29 16:15 ` Sriram Periyasamy [this message]
2018-01-29 16:15 ` [alsa-devel] [PATCH v8 2/3] ASoC: Intel: Skylake: Make DSP replies more human readable Sriram Periyasamy
2018-01-29 16:16 ` [alsa-devel] [PATCH v8 3/3] ASoC: Intel: Skylake: Add FW reply for MCLK/SCLK IPC Sriram Periyasamy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1517242560-22157-2-git-send-email-sriramx.periyasamy@intel.com \
    --to=sriramx.periyasamy@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=harshapriya.n@intel.com \
    --cc=liam.r.girdwood@linux.intel.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=naveen.m@intel.com \
    --cc=patches.audio@intel.com \
    --cc=sboyd@codeaurora.org \
    --cc=subhransu.s.prusty@intel.com \
    --cc=tiwai@suse.de \
    --cc=vinod.koul@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).