From: libin.yang@intel.com
To: alsa-devel@alsa-project.org, broonie@kernel.org
Cc: libin.yang@intel.com
Subject: [PATCH V2] ASoC: fix hdmi codec driver contest in S3
Date: Fri, 22 Mar 2019 14:24:56 +0800 [thread overview]
Message-ID: <1553235896-8185-1-git-send-email-libin.yang@intel.com> (raw)
From: Libin Yang <libin.yang@intel.com>
In S3, there is a contest between dapm event and getting display power.
When resume, the sequence is:
hdac_hdmi_runtime_resume()
=> snd_hdac_display_power()
hdac_hdmi_xxx_widget_event()
The hdac_hdmi_xxx_widget_event() are based on the power being on.
Otherwise, the operation on the codec register will fail.
However, in snd_hdac_display_power(), it may sleep because of the
mutex_lock() in display driver. In this case, hdac_hdmi_xxx_widget_event()
will be called before the power is on.
Let's not operate the registers and wait for the power in
hdac_hdmi_xxx_widget_event()
Signed-off-by: Libin Yang <libin.yang@intel.com>
---
sound/soc/codecs/hdac_hdmi.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
index 5eeb0fe..3c5c122 100644
--- a/sound/soc/codecs/hdac_hdmi.c
+++ b/sound/soc/codecs/hdac_hdmi.c
@@ -144,6 +144,7 @@ struct hdac_hdmi_priv {
int num_pin;
int num_cvt;
int num_ports;
+ int display_power; /* 0: power off; 1 power on */
struct mutex pin_mutex;
struct hdac_chmap chmap;
struct hdac_hdmi_drv_data *drv_data;
@@ -742,12 +743,27 @@ static void hdac_hdmi_set_amp(struct hdac_device *hdev,
AC_VERB_SET_AMP_GAIN_MUTE, val);
}
+static int wait_for_display_power(struct hdac_hdmi_priv *hdmi)
+{
+ int i = 0;
+
+ /* sleep for totally 80ms ~ 200ms should be enough */
+ while (i < 40) {
+ if (!hdmi->display_power)
+ usleep_range(2000, 5000);
+ else
+ return 0;
+ i++;
+ }
+ return -EAGAIN;
+}
static int hdac_hdmi_pin_output_widget_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kc, int event)
{
struct hdac_hdmi_port *port = w->priv;
struct hdac_device *hdev = dev_to_hdac_dev(w->dapm->dev);
+ struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
struct hdac_hdmi_pcm *pcm;
dev_dbg(&hdev->dev, "%s: widget: %s event: %x\n",
@@ -757,6 +773,11 @@ static int hdac_hdmi_pin_output_widget_event(struct snd_soc_dapm_widget *w,
if (!pcm)
return -EIO;
+ if (wait_for_display_power(hdmi)) {
+ dev_err(&hdev->dev, "%s: hdmi power is not ready\n", __func__);
+ return -EAGAIN;
+ }
+
/* set the device if pin is mst_capable */
if (hdac_hdmi_port_select_set(hdev, port) < 0)
return -EIO;
@@ -803,6 +824,11 @@ static int hdac_hdmi_cvt_output_widget_event(struct snd_soc_dapm_widget *w,
if (!pcm)
return -EIO;
+ if (wait_for_display_power(hdmi)) {
+ dev_err(&hdev->dev, "%s: hdmi power is not ready\n", __func__);
+ return -EAGAIN;
+ }
+
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
hdac_hdmi_set_power_state(hdev, cvt->nid, AC_PWRST_D0);
@@ -840,6 +866,7 @@ static int hdac_hdmi_pin_mux_widget_event(struct snd_soc_dapm_widget *w,
{
struct hdac_hdmi_port *port = w->priv;
struct hdac_device *hdev = dev_to_hdac_dev(w->dapm->dev);
+ struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
int mux_idx;
dev_dbg(&hdev->dev, "%s: widget: %s event: %x\n",
@@ -850,6 +877,11 @@ static int hdac_hdmi_pin_mux_widget_event(struct snd_soc_dapm_widget *w,
mux_idx = dapm_kcontrol_get_value(kc);
+ if (wait_for_display_power(hdmi)) {
+ dev_err(&hdev->dev, "%s: hdmi power is not ready\n", __func__);
+ return -EAGAIN;
+ }
+
/* set the device if pin is mst_capable */
if (hdac_hdmi_port_select_set(hdev, port) < 0)
return -EIO;
@@ -2068,6 +2100,7 @@ static int hdac_hdmi_runtime_suspend(struct device *dev)
{
struct hdac_device *hdev = dev_to_hdac_dev(dev);
struct hdac_bus *bus = hdev->bus;
+ struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
struct hdac_ext_link *hlink = NULL;
dev_dbg(dev, "Enter: %s\n", __func__);
@@ -2095,6 +2128,7 @@ static int hdac_hdmi_runtime_suspend(struct device *dev)
snd_hdac_ext_bus_link_put(bus, hlink);
snd_hdac_display_power(bus, hdev->addr, false);
+ hdmi->display_power = 0;
return 0;
}
@@ -2102,6 +2136,7 @@ static int hdac_hdmi_runtime_suspend(struct device *dev)
static int hdac_hdmi_runtime_resume(struct device *dev)
{
struct hdac_device *hdev = dev_to_hdac_dev(dev);
+ struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
struct hdac_bus *bus = hdev->bus;
struct hdac_ext_link *hlink = NULL;
@@ -2128,6 +2163,7 @@ static int hdac_hdmi_runtime_resume(struct device *dev)
snd_hdac_codec_read(hdev, hdev->afg, 0, AC_VERB_SET_POWER_STATE,
AC_PWRST_D0);
+ hdmi->display_power = 1;
return 0;
}
#else
--
2.7.4
next reply other threads:[~2019-03-22 6:41 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-22 6:24 libin.yang [this message]
2019-03-22 9:04 ` [PATCH V2] ASoC: fix hdmi codec driver contest in S3 Takashi Iwai
2019-03-22 9:12 ` Yang, Libin
2019-03-22 9:56 ` Takashi Iwai
2019-03-22 11:46 ` Yang, Libin
2019-03-22 20:25 ` Takashi Iwai
2019-03-25 6:51 ` Yang, Libin
2019-03-25 10:08 ` Takashi Iwai
2019-03-25 14:27 ` Yang, Libin
2019-03-25 14:38 ` Takashi Iwai
2019-03-26 5:42 ` Yang, Libin
2019-03-26 7:36 ` Takashi Iwai
2019-03-26 7:58 ` Yang, Libin
2019-03-26 8:59 ` Takashi Iwai
2019-03-26 11:02 ` Yang, Libin
2019-03-26 11:10 ` Takashi Iwai
2019-03-26 11:19 ` Yang, Libin
2019-03-26 11:22 ` Takashi Iwai
2019-03-26 11:28 ` Yang, Libin
2019-03-26 8:46 ` Yang, Libin
2019-03-26 8:53 ` Takashi Iwai
2019-03-26 11:15 ` Yang, Libin
2019-03-26 11:19 ` Takashi Iwai
2019-03-26 11:21 ` Yang, Libin
2019-03-27 6:14 ` Yang, Libin
2019-03-28 7:10 ` Yang, Libin
2019-03-28 7:15 ` Takashi Iwai
2019-03-28 7:28 ` Yang, Libin
2019-03-28 7:31 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1553235896-8185-1-git-send-email-libin.yang@intel.com \
--to=libin.yang@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox