From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lucas Stach Subject: Re: [PATCH 07/10] ASoC: fsl_sai: Add support for FIFO combine mode Date: Mon, 22 Jul 2019 15:01:17 +0200 Message-ID: <1563800477.2311.12.camel@pengutronix.de> References: <20190722124833.28757-1-daniel.baluta@nxp.com> <20190722124833.28757-8-daniel.baluta@nxp.com> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20190722124833.28757-8-daniel.baluta@nxp.com> Sender: linux-kernel-owner@vger.kernel.org To: Daniel Baluta , broonie@kernel.org Cc: festevam@gmail.com, perex@perex.cz, tiwai@suse.com, Xiubo.Lee@gmail.com, nicoleotsuka@gmail.com, timur@kernel.org, alsa-devel@alsa-project.org, linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org, linux-imx@nxp.com, shengjiu.wang@nxp.com, angus@akkea.ca, kernel@pengutronix.de, viorel.suman@nxp.com List-Id: alsa-devel@alsa-project.org Am Montag, den 22.07.2019, 15:48 +0300 schrieb Daniel Baluta: > FIFO combining mode allows the separate FIFOs for multiple data > channels > to be used as a single FIFO for either software accesses or a single > data > channel or both. > > FIFO combined mode is described in chapter 13.10.3.5.4 from i.MX8MQ > reference manual [1]. > > For each direction (RX/TX) fifo combine mode is read from fsl,fcomb- > mode > DT property. By default, if no property is specified fifo combine > mode > is disabled. > > [1]https://cache.nxp.com/secured/assets/documents/en/reference-manual > /IMX8MDQLQRM.pdf?__gda__=1563728701_38bea7f0f726472cc675cb141b91bec7& > fileExt=.pdf > > Signed-off-by: Daniel Baluta > --- >  sound/soc/fsl/fsl_sai.c | 37 +++++++++++++++++++++++++++++++++++++ >  sound/soc/fsl/fsl_sai.h |  9 +++++++++ >  2 files changed, 46 insertions(+) > > diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c > index d0fa02188b7c..140014901fce 100644 > --- a/sound/soc/fsl/fsl_sai.c > +++ b/sound/soc/fsl/fsl_sai.c > @@ -475,6 +475,35 @@ static int fsl_sai_hw_params(struct > snd_pcm_substream *substream, >   } >   } >   > + switch (sai->soc_data->fcomb_mode[tx]) { > + case FSL_SAI_FCOMB_NONE: > + regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx), > +    FSL_SAI_CR4_FCOMB_SOFT | > +    FSL_SAI_CR4_FCOMB_SHIFT, 0); > + break; > + case FSL_SAI_FCOMB_SHIFT: > + regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx), > +    FSL_SAI_CR4_FCOMB_SOFT | > +    FSL_SAI_CR4_FCOMB_SHIFT, > +    FSL_SAI_CR4_FCOMB_SHIFT); > + break; > + case FSL_SAI_FCOMB_SOFT: > + regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx), > +    FSL_SAI_CR4_FCOMB_SOFT | > +    FSL_SAI_CR4_FCOMB_SHIFT, > +    FSL_SAI_CR4_FCOMB_SOFT); > + break; > + case FSL_SAI_FCOMB_BOTH: > + regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx), > +    FSL_SAI_CR4_FCOMB_SOFT | > +    FSL_SAI_CR4_FCOMB_SHIFT, > +    FSL_SAI_CR4_FCOMB_SOFT | > +    FSL_SAI_CR4_FCOMB_SHIFT); > + break; > + default: > + break; > + } This would probably look less redundant if you only select the bits to set in the switch statement and move the regmap_update_bits after the switch. Regards, Lucas >   regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx), >      FSL_SAI_CR4_SYWD_MASK | > FSL_SAI_CR4_FRSZ_MASK, >      val_cr4); > @@ -887,6 +916,14 @@ static int fsl_sai_probe(struct platform_device > *pdev) >   } >   } >   > + /* FIFO combine mode for TX/RX, defaults to disabled */ > + sai->fcomb_mode[RX] = FSL_SAI_FCOMB_NONE; > + sai->fcomb_mode[TX] = FSL_SAI_FCOMB_NONE; > + of_property_read_u32_index(np, "fsl,fcomb-mode", RX, > +    &sai->fcomb_mode[RX]); > + of_property_read_u32_index(np, "fsl,fcomb-mode", TX, > +    &sai->fcomb_mode[TX]); > + >   /* active data lines mask for TX/RX, defaults to 1 (only the > first >    * data line is enabled >    */ > diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h > index 6d32f0950ec5..abf140951187 100644 > --- a/sound/soc/fsl/fsl_sai.h > +++ b/sound/soc/fsl/fsl_sai.h > @@ -115,6 +115,8 @@ >  #define FSL_SAI_CR3_WDFL_MASK 0x1f >   >  /* SAI Transmit and Receive Configuration 4 Register */ > +#define FSL_SAI_CR4_FCOMB_SHIFT BIT(26) > +#define FSL_SAI_CR4_FCOMB_SOFT  BIT(27) >  #define FSL_SAI_CR4_FRSZ(x) (((x) - 1) << 16) >  #define FSL_SAI_CR4_FRSZ_MASK (0x1f << 16) >  #define FSL_SAI_CR4_SYWD(x) (((x) - 1) << 8) > @@ -155,6 +157,12 @@ >  #define FSL_SAI_MAXBURST_TX 6 >  #define FSL_SAI_MAXBURST_RX 6 >   > +/* FIFO combine modes */ > +#define FSL_SAI_FCOMB_NONE     0 > +#define FSL_SAI_FCOMB_SHIFT    1 > +#define FSL_SAI_FCOMB_SOFT     2 > +#define FSL_SAI_FCOMB_BOTH     3 > + >  struct fsl_sai_soc_data { >   bool use_imx_pcm; >   unsigned int fifo_depth; > @@ -177,6 +185,7 @@ struct fsl_sai { >   unsigned int slot_width; >   >   unsigned int dl_mask[2]; > + unsigned int fcomb_mode[2]; >   >   const struct fsl_sai_soc_data *soc_data; >   struct snd_dmaengine_dai_dma_data dma_params_rx;