* USB-Audio: Add support for the SSL 2 MK II
[not found] <alsa-project/alsa-ucm-conf/pr/681@alsa-project.org>
@ 2026-01-06 18:23 ` GitHub pull_request - opened
2026-01-06 18:23 ` USB-Audio: Add support for the SSL 2 MK II and SSL2+ " GitHub pull_request - edited
1 sibling, 0 replies; 2+ messages in thread
From: GitHub pull_request - opened @ 2026-01-06 18:23 UTC (permalink / raw)
To: alsa-devel
alsa-project/alsa-ucm-conf pull request #681 was opened from MTRNord:
This adds support for https://solidstatelogic.com/products/ssl-2-mkii and the https://solidstatelogic.com/products/ssl-2-plus-mkii and solves #555
The MK II shows up the same way as the SSL2, but as a different USB Device.
I only own the SSL2 MK2, but not the SSL2+ MK2. So I can only verify it for the SSL2 MK2. However, I am fairly certain that the + version likely is also behaving identically. There are no visible spec changes between the v1 and MK2 of these devices, from all I was able to tell based on the internet. So, likely only the USB ID changed (at least for the things alsa-ucm is concerened about)
Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/681
Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/681.patch
Repository URL: https://github.com/alsa-project/alsa-ucm-conf
^ permalink raw reply [flat|nested] 2+ messages in thread
* USB-Audio: Add support for the SSL 2 MK II and SSL2+ MK II
[not found] <alsa-project/alsa-ucm-conf/pr/681@alsa-project.org>
2026-01-06 18:23 ` USB-Audio: Add support for the SSL 2 MK II GitHub pull_request - opened
@ 2026-01-06 18:23 ` GitHub pull_request - edited
1 sibling, 0 replies; 2+ messages in thread
From: GitHub pull_request - edited @ 2026-01-06 18:23 UTC (permalink / raw)
To: alsa-devel
alsa-project/alsa-ucm-conf pull request #681 was edited from MTRNord:
This adds support for https://solidstatelogic.com/products/ssl-2-mkii and the https://solidstatelogic.com/products/ssl-2-plus-mkii and solves #555
The MK II shows up the same way as the SSL2, but as a different USB Device.
I only own the SSL2 MK2, but not the SSL2+ MK2. So I can only verify it for the SSL2 MK2. However, I am fairly certain that the + version likely is also behaving identically. There are no visible spec changes between the v1 and MK2 of these devices, from all I was able to tell based on the internet. So, likely only the USB ID changed (at least for the things alsa-ucm is concerened about)
Request URL : https://github.com/alsa-project/alsa-ucm-conf/pull/681
Patch URL : https://github.com/alsa-project/alsa-ucm-conf/pull/681.patch
Repository URL: https://github.com/alsa-project/alsa-ucm-conf
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-01-06 18:24 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <alsa-project/alsa-ucm-conf/pr/681@alsa-project.org>
2026-01-06 18:23 ` USB-Audio: Add support for the SSL 2 MK II GitHub pull_request - opened
2026-01-06 18:23 ` USB-Audio: Add support for the SSL 2 MK II and SSL2+ " GitHub pull_request - edited
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox