* No sound with Odys Winpad v10 - byt-rt5640
@ 2015-09-05 16:12 Moritz
0 siblings, 0 replies; only message in thread
From: Moritz @ 2015-09-05 16:12 UTC (permalink / raw)
To: Jie Yang; +Cc: alsa-devel
[-- Attachment #1: Type: text/plain, Size: 7208 bytes --]
Hi,
I'm having trouble getting sound to work and it looks like it's a bug in
the driver.
Full description:
When loading the kernel-module for Bay Trail SoC TCO device (Version=3,
TCOBASE=0x0460) the kernel throws a kernel trace depending on the
firmware-image.
First I provided the firmware-image from kernel.org:
fw_sst_0f28.bin-48kHz_i2s_master
With this image the kernel loads the firmware but no sound-devices are
found. /proc/asound/cards reports no cards. dmesg just tells
[ 11.196018] byt-rt5640 byt-rt5640: ASoC: CPU DAI baytrail-pcm-audio
not registered
If I'm loading a firmware-image from Intel directly I get a sound-device
in /proc but the module failes later with a kernel trace. The
download-link to the intel-firmware:
https://downloadcenter.intel.com/download/23903
The relevant parts of my dmesg for this problem:
[ 11.120805] byt-rt5640 byt-rt5640: ASoC: CPU DAI baytrail-pcm-audio
not registered
[ 11.214831] iTCO_vendor_support: vendor-support=0
[ 11.215294] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.215391] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3,
TCOBASE=0x0460)
[ 11.215655] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.215997] byt-rt5640 byt-rt5640: ASoC: CPU DAI baytrail-pcm-audio
not registered
[ 11.232805] baytrail-pcm-audio baytrail-pcm-audio: FW version:
04.05.12.02
[ 11.232808] baytrail-pcm-audio baytrail-pcm-audio: Build type: 2
[ 11.232811] baytrail-pcm-audio baytrail-pcm-audio: Build date: Jan 16
2014 18:17:00
[ 11.259456] byt-rt5640 byt-rt5640: rt5640-aif1 <-> baytrail-pcm-audio
mapping ok
[ 11.970293] audit: type=1305 audit(1441466901.770:2): audit_pid=608
old=0 auid=4294967295 ses=4294967295 res=1
[ 12.291031] irq 6: nobody cared (try booting with the "irqpoll"
option)
[ 12.294817] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O
4.2.0-4-desktop #1
[ 12.294822] Hardware name: AXDIA International GmbH WINPAD V10/Type2
- Board Product Name, BIOS AD1012.1.03.017 11/21/2014
[ 12.294826] 00000000 00000000 f582df50 c080ecdd f5b3f500 f582df70
c02abab9 c09c9bfc
[ 12.294839] 00000006 00000000 f582df6c f5b3f500 00000006 f582df94
c02abf49 f582df94
[ 12.294850] c05f400c fffb910a 00000000 f5b3f500 f5b3f570 00000000
f582dfd0 c02a9a53
[ 12.294861] Call Trace:
[ 12.294874] [<c080ecdd>] dump_stack+0x48/0x69
[ 12.294882] [<c02abab9>] __report_bad_irq+0x29/0xd0
[ 12.294888] [<c02abf49>] note_interrupt+0x1c9/0x210
[ 12.294896] [<c05f400c>] ? add_interrupt_randomness+0x15c/0x190
[ 12.294902] [<c02a9a53>] handle_irq_event_percpu+0xa3/0x1c0
[ 12.294908] [<c02a9ba3>] handle_irq_event+0x33/0x50
[ 12.294914] [<c02ac3b5>] handle_fasteoi_irq+0x75/0x130
[ 12.294919] [<c02ac340>] ? handle_simple_irq+0x70/0x70
[ 12.294925] [<c0204b11>] handle_irq+0x71/0x90
[ 12.294929] <IRQ> [<c081603c>] do_IRQ+0x3c/0xd0
[ 12.294941] [<c08155b3>] common_interrupt+0x33/0x38
[ 12.294948] [<c06e753f>] ? cpuidle_enter_state+0xaf/0x2e0
[ 12.294954] [<c06e77a4>] cpuidle_enter+0x14/0x20
[ 12.294961] [<c02923f3>] call_cpuidle+0x33/0x70
[ 12.294967] [<c029268e>] cpu_startup_entry+0x25e/0x320
[ 12.294973] [<c080743b>] rest_init+0x7b/0x80
[ 12.294980] [<c0b34cd8>] start_kernel+0x456/0x45d
[ 12.294986] [<c0b3464e>] ? set_init_arg+0x52/0x52
[ 12.294992] [<c0b3438c>] i386_start_kernel+0x13a/0x13d
[ 12.294995] handlers:
[ 12.298499] [<f8725c80>] sst_byt_irq [snd_soc_sst_baytrail_pcm]
threaded [<f8724360>] sst_byt_irq_thread [snd_soc_sst_baytrail_pcm]
[ 12.302073] Disabling IRQ #6
with my limited understanding it looks like the irq isn't handled
correctly.
System information:
Linux klappstulle.XXX 4.2.0-4-desktop #1 SMP PREEMPT Mon Aug 31 12:34:37
UTC 2015 (efc468a) i686 i686 i386 GNU/Linux
Modules Loaded fuse dm_crypt drbg ansi_cprng algif_skcipher af_alg loop
nf_log_ipv6 af_packet xt_pkttype
nf_log_ipv4 nf_log_common xt_LOG xt_limit ip6t_REJECT xt_tcpudp
nf_conntrack_ipv6 nf_defrag_ipv6
ip6table_raw ipt_REJECT iptable_raw xt_CT iptable_filter
ip6table_mangle nf_conntrack_netbios_ns
nf_conntrack_broadcast nf_conntrack_ipv4 nf_defrag_ipv4 ip_tables
xt_conntrack nf_conntrack
ip6table_filter ip6_tables x_tables xfs libcrc32c nls_iso8859_1
nls_cp437 vfat fat joydev hid_multitouch
iTCO_wdt iTCO_vendor_support r8723bs snd_soc_sst_baytrail_pcm
snd_soc_sst_ipc snd_soc_sst_dsp
dw_dmac_core snd_soc_sst_byt_rt5640_mach intel_powerclamp coretemp
kvm_intel kvm crc32_pclmul
aesni_intel aes_i586 xts lrw gf128mul ablk_helper cryptd pcspkr
efivars cfg80211 snd_intel_sst_acpi
snd_intel_sst_core snd_soc_rt5640 snd_soc_sst_mfld_platform
snd_soc_rl6231 snd_soc_core snd_compress
lpc_ich mfd_core snd_pcm thermal mei_txe xhci_pci mei rfkill_gpio
xhci_hcd 8250_fintek jsa1212
industrialio i2c_hid regmap_i2c battery rfkill snd_timer snd acpi_pad
int3402_thermal int3403_thermal
processor_thermal_device int340x_thermal_zone intel_soc_dts_iosf ac
int3400_thermal acpi_thermal_rel
soundcore ac97_bus snd_soc_sst_acpi i2c_designware_platform
i2c_designware_core 8250_dw
pwm_lpss_platform pwm_lpss processor dm_mod efivarfs btrfs xor
raid6_pq mmc_block crc32c_intel i915
i2c_algo_bit drm_kms_helper drm button video sdhci_acpi sdhci mmc_core
sg
Package versions
gcc-4.8-7.1.2.i586
make-4.0-2.2.3.i586
binutils-2.24-6.1.7.i586
util-linux-2.25.1-17.1.i586
mount from util-linux 2.25.1 (libmount 2.25.0: selinux, assert, debug)
glibc-2.19-16.15.1.i686
linux-glibc-devel-3.16-2.1.7.noarch
/proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.2.0-4-desktop
root=UUID=fc064bad-46f0-4947-9364-3a7864bb0b6b ro nomodeset \
sdhci.debug_quirks=0x8000 quiet showopts
/proc/cpuinfo
processor : *** 0 - 3 ***
vendor_id : GenuineIntel
cpu family : 6
model : 55
model name : Intel(R) Atom(TM) CPU Z3735F @ 1.33GHz
stepping : 8
microcode : 0x82a
cpu MHz : 1751.642
cache size : 1024 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx
rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc
aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16
xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand
lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority
ept vpid tsc_adjust smep erms
bugs :
bogomips : 2662.40
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
/proc/asound/cards
0 [bytrt5640 ]: byt-rt5640 - byt-rt5640
byt-rt5640
/proc/asound/devices
2: [ 0] : control
3: [ 0- 0]: digital audio playback
4: [ 0- 0]: digital audio capture
33: : timer
Please see attached for full dmesg.
Kind regards
Moritz
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 46817 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.0-4-desktop (geeko@buildhost) (gcc version 4.8.3 20140627 [gcc-4_8-branch revision 212064] (SUSE Linux) ) #1 SMP PREEMPT Mon Aug 31 12:34:37 UTC 2015 (efc468a)
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000024a7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000024a80000-0x0000000024afffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000024b00000-0x000000007bad1fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bad2000-0x000000007bcf1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007bcf2000-0x000000007bcf2fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bcf3000-0x000000007bcf3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007bcf4000-0x000000007bcf5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bcf6000-0x000000007bcf6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007bcf7000-0x000000007c7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007cc00000-0x000000007ccc2fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ccc3000-0x000000007cd46fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007cd47000-0x000000007cdb6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007cdb7000-0x000000007cdf6fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007cdf7000-0x000000007cdfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff60000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by INSYDE Corp.
[ 0.000000] efi: ACPI 2.0=0x7cdf6014 ESRT=0x7bb77210 SMBIOS=0x7bca9000
[ 0.000000] esrt: Reserving ESRT space from 0x000000007bb77210 to 0x000000007bb77248.
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: AXDIA International GmbH WINPAD V10/Type2 - Board Product Name, BIOS AD1012.1.03.017 11/21/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7ce00 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFF60000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 3 base 07D000000 mask FFF000000 uncachable
[ 0.000000] 4 base 07CE00000 mask FFFE00000 uncachable
[ 0.000000] 5 base 07C800000 mask FFFC00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x011fffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x36e00000-0x36ffffff]
[ 0.000000] [mem 0x36e00000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x24a7ffff]
[ 0.000000] [mem 0x20200000-0x249fffff] page 2M
[ 0.000000] [mem 0x24a00000-0x24a7ffff] page 4k
[ 0.000000] BRK [0x00ce7000, 0x00ce7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x24b00000-0x36dfffff]
[ 0.000000] [mem 0x24b00000-0x24bfffff] page 4k
[ 0.000000] [mem 0x24c00000-0x36dfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x371fdfff]
[ 0.000000] [mem 0x37000000-0x371fdfff] page 4k
[ 0.000000] BRK [0x00ce8000, 0x00ce8fff] PGTABLE
[ 0.000000] BRK [0x00ce9000, 0x00ce9fff] PGTABLE
[ 0.000000] BRK [0x00cea000, 0x00ceafff] PGTABLE
[ 0.000000] BRK [0x00ceb000, 0x00cebfff] PGTABLE
[ 0.000000] BRK [0x00cec000, 0x00cecfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x24202000-0x24a7afff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007CDF6014 000024 (v02 INSYDE)
[ 0.000000] ACPI: XSDT 0x000000007CDCF188 0000CC (v01 INSYDE INSYDE 00000003 01000013)
[ 0.000000] ACPI: FACP 0x000000007CDF0000 00010C (v05 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x000000007CDDC000 00EF33 (v02 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x000000007CDF5000 000236 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x000000007CDF4000 000055 (v03 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x000000007CDF3000 000042 (v01 INSYDE INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: OEM0 0x000000007CDF2000 000084 (v05 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: DBG2 0x000000007CDF1000 000072 (v00 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x000000007CDEF000 000038 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: LPIT 0x000000007CDEE000 000104 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x000000007CDED000 00006C (v03 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x000000007CDEC000 00003C (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: SLIC 0x000000007CDEB000 000176 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007CDD9000 0024BD (v01 INSYDE DptfTab 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007CDD8000 0005DA (v01 INSYDE CpuDptf 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007CDD7000 000058 (v01 INSYDE LowPwrM 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007CDD6000 0000FF (v01 INSYDE SoCDptf 00000003 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007CDD5000 000763 (v01 INSYDE CpuPm 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007CDD4000 000290 (v01 INSYDE Cpu0Tst 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000007CDD3000 00017A (v01 INSYDE ApTst 00003000 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x000000007CDD1000 000044 (v01 INSYDE INSYDE 00000002 ACPI 00040000)
[ 0.000000] ACPI: CSRT 0x000000007CDD0000 00014C (v00 INSYDE INSYDE 00000005 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x000000007CDD2000 000038 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007cdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x371f4000-0x371f5fff]
[ 0.000000] 1116MB HIGHMEM available.
[ 0.000000] 881MB LOWMEM available.
[ 0.000000] max_low_pfn = 371fe, highstart_pfn = 371fe
[ 0.000000] Low memory ends at vaddr f71fe000
[ 0.000000] High memory starts at vaddr f71fe000
[ 0.000000] mapped low ram: 0 - 371fe000
[ 0.000000] low ram: 0 - 371fe000
[ 0.000000] Node: 0, start_pfn: 1, end_pfn: 8f
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 0
[ 0.000000] Node: 0, start_pfn: 90, end_pfn: 9e
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 0
[ 0.000000] Node: 0, start_pfn: 100, end_pfn: 20000
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 0 4000 8000 c000 10000 14000 18000 1c000
[ 0.000000] Node: 0, start_pfn: 20200, end_pfn: 24a80
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 20000 24000
[ 0.000000] Node: 0, start_pfn: 24b00, end_pfn: 7bad2
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 24000 28000 2c000 30000 34000 38000 3c000 40000 44000 48000 4c000 50000 54000 58000 5c000 60000 64000 68000 6c000 70000 74000 78000
[ 0.000000] Node: 0, start_pfn: 7bcf2, end_pfn: 7bcf3
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 78000
[ 0.000000] Node: 0, start_pfn: 7bcf4, end_pfn: 7bcf6
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 78000
[ 0.000000] Node: 0, start_pfn: 7bcf7, end_pfn: 7c800
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 78000 7c000
[ 0.000000] Node: 0, start_pfn: 7cc00, end_pfn: 7ccc3
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 7c000
[ 0.000000] Node: 0, start_pfn: 7cdf7, end_pfn: 7ce00
[ 0.000000] Setting physnode_map array to node 0 for pfns:
[ 0.000000] 7c000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000371fdfff]
[ 0.000000] HighMem [mem 0x00000000371fe000-0x000000007cdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff]
[ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x0000000024a7ffff]
[ 0.000000] node 0: [mem 0x0000000024b00000-0x000000007bad1fff]
[ 0.000000] node 0: [mem 0x000000007bcf2000-0x000000007bcf2fff]
[ 0.000000] node 0: [mem 0x000000007bcf4000-0x000000007bcf5fff]
[ 0.000000] node 0: [mem 0x000000007bcf7000-0x000000007c7fffff]
[ 0.000000] node 0: [mem 0x000000007cc00000-0x000000007ccc2fff]
[ 0.000000] node 0: [mem 0x000000007cdf7000-0x000000007cdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007cdfffff]
[ 0.000000] On node 0 totalpages: 508870
[ 0.000000] free_area_init_node: node 0, pgdat f71f4000, node_mem_map f6060024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] Normal zone: 1949 pages used for memmap
[ 0.000000] Normal zone: 221054 pages, LIFO batch:31
[ 0.000000] HighMem zone: 283820 pages, LIFO batch:31
[ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED
[ 0.000000] Using APIC driver default
[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[ 0.000000] Reserving Intel graphics stolen memory at 0x7d000000-0x7effffff
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x24a80000-0x24afffff]
[ 0.000000] e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 18 pages/cpu @f600b000 s44108 r0 d29620 u73728
[ 0.000000] pcpu-alloc: s44108 r0 d29620 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 506885
[ 0.000000] Policy zone: HighMem
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-4-desktop root=UUID=fc064bad-46f0-4947-9364-3a7864bb0b6b ro nomodeset sdhci.debug_quirks=0x8000 quiet showopts
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000371fe:0007ce00)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1966776K/2035480K available (6234K kernel code, 646K rwdata, 2532K rodata, 776K init, 900K bss, 68704K reserved, 0K cma-reserved, 1123808K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xff5b5000 - 0xfffff000 (10536 kB)
pkmap : 0xff200000 - 0xff400000 (2048 kB)
vmalloc : 0xf79fe000 - 0xff1fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf71fe000 ( 881 MB)
.init : 0xc0b34000 - 0xc0bf6000 ( 776 kB)
.data : 0xc0816e68 - 0xc0b32b80 (3183 kB)
.text : 0xc0200000 - 0xc0816e68 (6235 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:1024 0
[ 0.000000] CPU 0 irqstacks, hard=f582c000 soft=f582e000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Maximum core-clock to bus-clock ratio: 0x10
[ 0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
[ 0.000000] TSC runs at 1331200 KHz
[ 0.000000] lapic_timer_frequency = 83200
[ 0.000000] tsc: Detected 1331.200 MHz processor
[ 0.000127] Calibrating delay loop (skipped), value calculated using timer frequency.. 2662.40 BogoMIPS (lpj=1331200)
[ 0.000150] pid_max: default: 32768 minimum: 301
[ 0.000207] ACPI: Core revision 20150619
[ 0.205803] ACPI: All ACPI Tables successfully acquired
[ 0.207831] Security Framework initialized
[ 0.207875] AppArmor: AppArmor initialized
[ 0.208153] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.208176] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.209388] Initializing cgroup subsys blkio
[ 0.209415] Initializing cgroup subsys memory
[ 0.209481] Initializing cgroup subsys devices
[ 0.209504] Initializing cgroup subsys freezer
[ 0.209532] Initializing cgroup subsys net_cls
[ 0.209553] Initializing cgroup subsys perf_event
[ 0.209575] Initializing cgroup subsys net_prio
[ 0.209594] Initializing cgroup subsys hugetlb
[ 0.209683] CPU: Physical Processor ID: 0
[ 0.209696] CPU: Processor Core ID: 0
[ 0.209715] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.209725] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.220989] mce: CPU supports 6 MCE banks
[ 0.221019] CPU0: Thermal monitoring enabled (TM1)
[ 0.221035] process: using mwait in idle threads
[ 0.221060] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.221074] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[ 0.223024] Freeing SMP alternatives memory: 24K (c0bf6000 - c0bfc000)
[ 0.226929] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.234568] ftrace: allocating 25417 entries in 50 pages
[ 0.292921] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.293052] TSC deadline timer enabled
[ 0.293069] smpboot: CPU0: Intel(R) Atom(TM) CPU Z3735F @ 1.33GHz (fam: 06, model: 37, stepping: 08)
[ 0.293205] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
[ 0.293261] ... version: 3
[ 0.293272] ... bit width: 40
[ 0.293281] ... generic registers: 2
[ 0.293292] ... value mask: 000000ffffffffff
[ 0.293302] ... max period: 000000ffffffffff
[ 0.293311] ... fixed-purpose events: 3
[ 0.293320] ... event mask: 0000000700000003
[ 0.300837] CPU 1 irqstacks, hard=f599a000 soft=f599c000
[ 0.300854] x86: Booting SMP configuration:
[ 0.300867] .... node #0, CPUs: #1
[ 0.301910] Initializing CPU#1
[ 0.315735] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.316905] CPU 2 irqstacks, hard=f5a56000 soft=f5a58000
[ 0.316922] #2
[ 0.317954] Initializing CPU#2
[ 0.333016] CPU 3 irqstacks, hard=f5a92000 soft=f5a94000
[ 0.333037] #3
[ 0.334068] Initializing CPU#3
[ 0.347555] x86: Booted up 1 node, 4 CPUs
[ 0.347579] smpboot: Total of 4 processors activated (10649.60 BogoMIPS)
[ 0.350298] devtmpfs: initialized
[ 0.352055] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.352076] PM: Registering ACPI NVS region [mem 0x7cd47000-0x7cdb6fff] (458752 bytes)
[ 0.352896] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.353477] pinctrl core: initialized pinctrl subsystem
[ 0.353653] RTC time: 15:58:18, date: 09/05/15
[ 0.354639] NET: Registered protocol family 16
[ 0.360202] cpuidle: using governor ladder
[ 0.365277] cpuidle: using governor menu
[ 0.365859] ACPI: bus type PCI registered
[ 0.365877] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.366482] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.366502] PCI: not using MMCONFIG
[ 0.367007] PCI: Using configuration type 1 for base access
[ 0.383316] ACPI: Added _OSI(Module Device)
[ 0.383335] ACPI: Added _OSI(Processor Device)
[ 0.383349] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.383362] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.522284] ACPI: Dynamic OEM Table Load:
[ 0.522383] ACPI: SSDT 0x00000000F5B4B800 000501 (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
[ 0.530072] ACPI: Dynamic OEM Table Load:
[ 0.530141] ACPI: SSDT 0x00000000F5B4B000 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
[ 0.541149] ACPI: Dynamic OEM Table Load:
[ 0.541214] ACPI: SSDT 0x00000000F59AFA00 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
[ 0.548481] ACPI: Dynamic OEM Table Load:
[ 0.548544] ACPI: SSDT 0x00000000F59B0940 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
[ 0.566882] ACPI: Interpreter enabled
[ 0.567004] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[ 0.567049] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[ 0.567085] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150619/hwxface-580)
[ 0.567119] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20150619/hwxface-580)
[ 0.567184] ACPI: (supports S0 S5)
[ 0.567199] ACPI: Using IOAPIC for interrupt routing
[ 0.567448] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.600227] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] not reserved in ACPI motherboard resources
[ 0.600248] PCI: not using MMCONFIG
[ 0.600386] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.612735] ACPI: Power Resource [USBC] (on)
[ 0.616320] ACPI: Power Resource [WWPR] (off)
[ 0.649884] ACPI: Power Resource [PLPE] (on)
[ 0.690616] ACPI: Power Resource [CLK0] (on)
[ 0.691683] ACPI: Power Resource [P28P] (off)
[ 0.692160] ACPI: Power Resource [P18P] (off)
[ 0.704895] ACPI: Power Resource [CLK0] (on)
[ 0.705365] ACPI: Power Resource [CLK1] (on)
[ 0.737916] ACPI: Power Resource [P28X] (off)
[ 0.738439] ACPI: Power Resource [P18X] (off)
[ 0.738987] ACPI: Power Resource [P28T] (off)
[ 0.739502] ACPI: Power Resource [P18T] (off)
[ 0.740002] ACPI: Power Resource [P1XT] (off)
[ 0.782414] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.782464] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.783118] \_SB_.PCI0:_OSC invalid UUID
[ 0.783133] _OSC request data:1 1e 0
[ 0.783170] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.785375] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.786705] PCI host bridge to bus 0000:00
[ 0.786735] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.786756] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.786776] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.786795] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.786814] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.786833] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.786852] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.786870] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.786889] pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff window]
[ 0.786908] pci_bus 0000:00: root bus resource [mem 0x7d000001-0x7f000000 window]
[ 0.786926] pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe window]
[ 0.786974] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff window]
[ 0.787030] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[ 0.787697] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[ 0.787768] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[ 0.787814] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[ 0.787856] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x1007]
[ 0.788560] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[ 0.788640] pci 0000:00:14.0: reg 0x10: [mem 0x90800000-0x9080ffff 64bit]
[ 0.788792] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.789460] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[ 0.789546] pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff]
[ 0.789586] pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff]
[ 0.789773] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.790434] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[ 0.795347] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.796325] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.797296] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.798271] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.799236] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.800204] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.801145] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.802112] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.854832] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.854853] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.854870] vgaarb: loaded
[ 0.854906] vgaarb: bridge control possible 0000:00:02.0
[ 0.855888] SCSI subsystem initialized
[ 0.856251] libata version 3.00 loaded.
[ 0.856303] ACPI: bus type USB registered
[ 0.856494] usbcore: registered new interface driver usbfs
[ 0.856593] usbcore: registered new interface driver hub
[ 0.856749] usbcore: registered new device driver usb
[ 0.857165] ioremap error for 0x7bca8000-0x7bca9000, requested 0x2, got 0x0
[ 0.857212] dmi: Firmware registration failed.
[ 0.857915] PCI: Using ACPI for IRQ routing
[ 0.857934] PCI: pci_cache_line_size set to 64 bytes
[ 0.858026] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.858052] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.858069] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.858083] e820: reserve RAM buffer [mem 0x24a80000-0x27ffffff]
[ 0.858097] e820: reserve RAM buffer [mem 0x7bad2000-0x7bffffff]
[ 0.858113] e820: reserve RAM buffer [mem 0x7bcf3000-0x7bffffff]
[ 0.858129] e820: reserve RAM buffer [mem 0x7bcf6000-0x7bffffff]
[ 0.858143] e820: reserve RAM buffer [mem 0x7c800000-0x7fffffff]
[ 0.858164] e820: reserve RAM buffer [mem 0x7ccc3000-0x7fffffff]
[ 0.858183] e820: reserve RAM buffer [mem 0x7ce00000-0x7fffffff]
[ 0.859166] NetLabel: Initializing
[ 0.859181] NetLabel: domain hash size = 128
[ 0.859190] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.859288] NetLabel: unlabeled traffic allowed by default
[ 0.859802] clocksource: Switched to clocksource refined-jiffies
[ 0.919787] AppArmor: AppArmor Filesystem Enabled
[ 0.920191] pnp: PnP ACPI init
[ 0.920647] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.921261] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.921287] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.921308] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 0.921332] system 00:01: [io 0x0600-0x061f] has been reserved
[ 0.921353] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.921382] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.922569] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.942137] pnp: PnP ACPI: found 3 devices
[ 0.960635] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.960660] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.960681] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.960699] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.960718] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.960736] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.960754] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 0.960773] pci_bus 0000:00: resource 11 [mem 0x90c00000-0x90ffffff window]
[ 0.960791] pci_bus 0000:00: resource 12 [mem 0x7d000001-0x7f000000 window]
[ 0.960810] pci_bus 0000:00: resource 13 [mem 0x80000000-0x908ffffe window]
[ 0.960828] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed40fff window]
[ 0.961073] NET: Registered protocol family 2
[ 0.962298] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.962445] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.962610] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.962699] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.962747] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.963166] NET: Registered protocol family 1
[ 0.963268] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.964476] PCI: CLS 0 bytes, default 64
[ 0.964844] Unpacking initramfs...
[ 7.216518] Freeing initrd memory: 8676K (e4202000 - e4a7b000)
[ 7.217443] microcode: CPU0 sig=0x30678, pf=0x2, revision=0x82a
[ 7.217519] microcode: CPU1 sig=0x30678, pf=0x2, revision=0x82a
[ 7.217564] microcode: CPU2 sig=0x30678, pf=0x2, revision=0x82a
[ 7.217615] microcode: CPU3 sig=0x30678, pf=0x2, revision=0x82a
[ 7.217946] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 7.218692] Scanning for low memory corruption every 60 seconds
[ 7.221323] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 7.221493] audit: initializing netlink subsys (disabled)
[ 7.221571] audit: type=2000 audit(1441468703.215:1): initialized
[ 7.223270] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 7.223482] zpool: loaded
[ 7.223502] zbud: loaded
[ 7.223850] VFS: Disk quotas dquot_6.6.0
[ 7.223971] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 7.225171] Key type big_key registered
[ 7.226569] Key type asymmetric registered
[ 7.226595] Asymmetric key parser 'x509' registered
[ 7.226759] bounce: pool size: 64 pages
[ 7.226884] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 7.227117] io scheduler noop registered
[ 7.227142] io scheduler deadline registered
[ 7.227219] io scheduler cfq registered (default)
[ 7.227869] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.227942] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 7.228250] efifb: probing for efifb
[ 7.228372] efifb: framebuffer at 0x80000000, mapped to 0xf8000000, using 4000k, total 4000k
[ 7.228388] efifb: mode is 1280x800x32, linelength=5120, pages=1
[ 7.228397] efifb: scrolling: redraw
[ 7.228412] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 7.270092] Console: switching to colour frame buffer device 160x50
[ 7.310738] fb0: EFI VGA frame buffer device
[ 7.310821] intel_idle: MWAIT substates: 0x33000020
[ 7.310835] intel_idle: v0.4 model 0x37
[ 7.310847] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 7.312640] GHES: HEST is not enabled!
[ 7.312951] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 7.333507] 00:02: ttyS0 at I/O 0x3f8 (irq = 23, base_baud = 115200) is a 16550A
[ 7.337859] hpet: number irqs doesn't agree with number of timers
[ 7.338270] Non-volatile memory driver v1.3
[ 7.338554] Linux agpgart interface v0.103
[ 7.342239] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.342299] ehci-pci: EHCI PCI platform driver
[ 7.342410] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.342448] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.342829] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 8.392269] i8042: No controller found
[ 8.393425] mousedev: PS/2 mouse device common for all mice
[ 8.394244] ACPI Warning: Could not enable fixed event - RealTimeClock (4) (20150619/evxface-654)
[ 8.394944] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 8.395073] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[ 8.395159] Intel P-state driver initializing.
[ 8.395881] ledtrig-cpu: registered to indicate activity on CPUs
[ 8.396103] ioremap error for 0x7bb77000-0x7bb78000, requested 0x2, got 0x0
[ 8.396561] esrt: ioremap(0x000000007bb77210, 56) failed.
[ 8.397065] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.397999] usbcore: registered new interface driver usbhid
[ 8.398012] usbhid: USB HID core driver
[ 8.398848] NET: Registered protocol family 10
[ 8.401920] Using IPI No-Shortcut mode
[ 8.403214] registered taskstats version 1
[ 8.403332] zswap: loading zswap
[ 8.403350] zswap: using zbud pool
[ 8.403367] zswap: using lzo compressor
[ 8.423626] Key type encrypted registered
[ 8.423650] AppArmor: AppArmor sha1 policy hashing enabled
[ 8.424053] Magic number: 15:426:992
[ 8.424197] rtc_cmos 00:00: setting system clock to 2015-09-05 15:58:26 UTC (1441468706)
[ 8.424789] PM: Hibernation image not present or could not be loaded.
[ 8.425416] Freeing unused kernel memory: 776K (c0b34000 - c0bf6000)
[ 8.425508] Write protecting the kernel text: 6236k
[ 8.425702] Write protecting the kernel read-only data: 2536k
[ 8.425707] NX-protecting the kernel data: 4004k
[ 8.433405] random: systemd urandom read with 0 bits of entropy available
[ 8.591022] systemd-journald[120]: Failed to set file attributes: Inappropriate ioctl for device
[ 8.824647] sdhci: Secure Digital Host Controller Interface driver
[ 8.824654] sdhci: Copyright(c) Pierre Ossman
[ 8.826184] sdhci-acpi 80860F14:00: No vmmc regulator found
[ 8.826192] sdhci-acpi 80860F14:00: No vqmmc regulator found
[ 8.834092] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 8.835412] sdhci-acpi INT33BB:00: No vmmc regulator found
[ 8.835420] sdhci-acpi INT33BB:00: No vqmmc regulator found
[ 8.843313] mmc1: SDHCI controller on ACPI [INT33BB:00] using ADMA
[ 8.843967] sdhci-acpi 80860F14:02: failed to setup card detect gpio
[ 8.844987] sdhci-acpi 80860F14:02: No vmmc regulator found
[ 8.844993] sdhci-acpi 80860F14:02: No vqmmc regulator found
[ 8.852542] mmc2: SDHCI controller on ACPI [80860F14:02] using ADMA
[ 8.875362] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 8.875588] ACPI: Lid Switch [LID0]
[ 8.886421] [drm] Initialized drm 1.1.0 20060810
[ 8.997613] mmc0: MAN_BKOPS_EN bit is not set
[ 9.005785] mmc0: new HS200 MMC card at address 0001
[ 9.008557] mmcblk0: mmc0:0001 032GE4 29.1 GiB
[ 9.008750] mmcblk0boot0: mmc0:0001 032GE4 partition 1 4.00 MiB
[ 9.008929] mmcblk0boot1: mmc0:0001 032GE4 partition 2 4.00 MiB
[ 9.009105] mmcblk0rpmb: mmc0:0001 032GE4 partition 3 4.00 MiB
[ 9.011316] mmcblk0: p1 p2 p3 p4 p5
[ 9.026184] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x13303f810e3, max_idle_ns: 440795235405 ns
[ 9.026222] clocksource: Switched to clocksource tsc
[ 9.081705] mmc1: new high speed SDIO card at address 0001
[ 9.121274] raid6: mmxx1 gen() 1332 MB/s
[ 9.142285] raid6: mmxx2 gen() 1992 MB/s
[ 9.159333] raid6: sse1x1 gen() 1300 MB/s
[ 9.175794] mmc2: new high speed SDXC card at address 0001
[ 9.176138] raid6: sse1x2 gen() 1289 MB/s
[ 9.176246] mmcblk1: mmc2:0001 00000 59.6 GiB
[ 9.177331] mmcblk1: p1
[ 9.193232] raid6: sse2x1 gen() 1601 MB/s
[ 9.210036] raid6: sse2x1 xor() 1480 MB/s
[ 9.227192] raid6: sse2x2 gen() 2179 MB/s
[ 9.244025] raid6: sse2x2 xor() 1933 MB/s
[ 9.244031] raid6: using algorithm sse2x2 gen() 2179 MB/s
[ 9.244034] raid6: .... xor() 1933 MB/s, rmw enabled
[ 9.244037] raid6: using ssse3x1 recovery algorithm
[ 9.244692] xor: measuring software checksum speed
[ 9.254013] pIII_sse : 4400.000 MB/sec
[ 9.264228] prefetch64-sse: 7476.000 MB/sec
[ 9.264233] xor: using function: prefetch64-sse (7476.000 MB/sec)
[ 9.273956] Btrfs loaded, assert=on
[ 9.278856] BTRFS: device fsid fc064bad-46f0-4947-9364-3a7864bb0b6b devid 1 transid 3245 /dev/mmcblk0p5
[ 9.528599] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 9.528607] PM: Marking nosave pages: [mem 0x0008f000-0x0008ffff]
[ 9.528611] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[ 9.528618] PM: Marking nosave pages: [mem 0x20000000-0x201fffff]
[ 9.528637] PM: Marking nosave pages: [mem 0x24a80000-0x24afffff]
[ 9.528643] PM: Basic memory bitmaps created
[ 9.533668] PM: Basic memory bitmaps freed
[ 9.541717] PM: Starting manual resume from disk
[ 9.541729] PM: Hibernation image partition 179:3 present
[ 9.541733] PM: Looking for hibernation image.
[ 9.542110] PM: Image not found (code -22)
[ 9.542117] PM: Hibernation image not present or could not be loaded.
[ 9.586256] BTRFS info (device mmcblk0p5): use ssd allocation scheme
[ 9.586270] BTRFS info (device mmcblk0p5): disk space caching is enabled
[ 10.220019] device-mapper: uevent: version 1.0.3
[ 10.220151] device-mapper: ioctl: 4.32.0-ioctl (2015-6-26) initialised: dm-devel@redhat.com
[ 10.272317] systemd-gpt-auto-generator[365]: Failed to verify GPT partition /dev/mmcblk0rpmb: Input/output error
[ 10.567910] BTRFS info (device mmcblk0p5): disk space caching is enabled
[ 10.717877] 80860F0A:00: ttyS4 at MMIO 0x9091b000 (irq = 15, base_baud = 2764800) is a 16550A
[ 10.718811] 80860F0A:01: ttyS5 at MMIO 0x9091d000 (irq = 16, base_baud = 2764800) is a 16550A
[ 10.734238] ACPI: AC Adapter [ADP1] (off-line)
[ 10.777377] i2c_designware 80860F41:04: I2C bus managed by PUNIT
[ 10.879386] ACPI: Battery Slot [BMBT] (battery present)
[ 10.884878] [Firmware Bug]: No valid trip found
[ 10.985347] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 10.985370] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 10.985784] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 10.985797] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 10.985987] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.985993] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.985999] usb usb1: Product: xHCI Host Controller
[ 10.986004] usb usb1: Manufacturer: Linux 4.2.0-4-desktop xhci-hcd
[ 10.986008] usb usb1: SerialNumber: 0000:00:14.0
[ 10.989107] hub 1-0:1.0: USB hub found
[ 10.989138] hub 1-0:1.0: 6 ports detected
[ 10.992961] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 10.992976] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 10.993098] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 10.993105] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.993110] usb usb2: Product: xHCI Host Controller
[ 10.993115] usb usb2: Manufacturer: Linux 4.2.0-4-desktop xhci-hcd
[ 10.993120] usb usb2: SerialNumber: 0000:00:14.0
[ 10.997052] hub 2-0:1.0: USB hub found
[ 10.997080] hub 2-0:1.0: 1 port detected
[ 11.003038] EFI Variables Facility v0.08 2004-May-17
[ 11.011979] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 11.068697] intel_soc_dts_thermal: request_threaded_irq ret -22
[ 11.091149] intel_soc_dts_thermal: request_threaded_irq ret -22
[ 11.123240] byt-rt5640 byt-rt5640: ASoC: CPU DAI baytrail-pcm-audio not registered
[ 11.139788] RTL8723BS: module init start
[ 11.139797] RTL8723BS: rtl8723bs v4.3.5.5_12290.20140916_BTCOEX20140507-4E40
[ 11.139801] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
[ 11.205739] iTCO_vendor_support: vendor-support=0
[ 11.206174] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.206272] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[ 11.210125] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.210208] byt-rt5640 byt-rt5640: ASoC: CPU DAI baytrail-pcm-audio not registered
[ 11.210497] baytrail-pcm-audio baytrail-pcm-audio: FW version: 04.05.12.02
[ 11.210503] baytrail-pcm-audio baytrail-pcm-audio: Build type: 2
[ 11.210509] baytrail-pcm-audio baytrail-pcm-audio: Build date: Jan 16 2014 18:17:00
[ 11.213951] random: nonblocking pool is initialized
[ 11.252251] byt-rt5640 byt-rt5640: rt5640-aif1 <-> baytrail-pcm-audio mapping ok
[ 11.261208] cfg80211: World regulatory domain updated:
[ 11.261216] cfg80211: DFS Master region: unset
[ 11.261220] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 11.261227] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.261232] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.261236] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.261241] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.261246] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 11.261251] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 11.261256] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.261261] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 11.361404] usb 1-2: new low-speed USB device number 2 using xhci_hcd
[ 11.365804] input: FTSC1000:00 2808:1015 as /devices/platform/80860F41:03/i2c-3/i2c-FTSC1000:00/0018:2808:1015.0001/input/input2
[ 11.366211] hid-multitouch 0018:2808:1015.0001: input,hidraw0: <UNKNOWN> HID v1.00 Device [FTSC1000:00 2808:1015] on
[ 11.429056] RTL8723BS: rtw_ndev_init(wlan0)
[ 11.431394] RTL8723BS: module init ret =0
[ 11.535401] usb 1-2: New USB device found, idVendor=0603, idProduct=0002
[ 11.535410] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.535417] usb 1-2: Product: USB Composite Device
[ 11.535422] usb 1-2: Manufacturer: SINO WEALTH
[ 11.535746] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 11.535759] usb 1-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 11.540336] input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:0603:0002.0002/input/input4
[ 11.580158] Adding 1952764k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:1952764k SSFS
[ 11.591830] hid-generic 0003:0603:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-2/input0
[ 11.597931] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 11.602720] input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:0603:0002.0003/input/input5
[ 11.608902] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 11.616785] XFS (mmcblk1p1): Mounting V5 Filesystem
[ 11.653792] hid-generic 0003:0603:0002.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-2/input1
[ 11.936572] XFS (mmcblk1p1): Ending clean mount
[ 12.074548] audit: type=1305 audit(1441468709.868:2): audit_pid=600 old=0 auid=4294967295 ses=4294967295 res=1
[ 12.242457] irq 6: nobody cared (try booting with the "irqpoll" option)
[ 12.245697] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.2.0-4-desktop #1
[ 12.245702] Hardware name: AXDIA International GmbH WINPAD V10/Type2 - Board Product Name, BIOS AD1012.1.03.017 11/21/2014
[ 12.245707] 00000000 00000000 f582df50 c080ecdd f5b3f500 f582df70 c02abab9 c09c9bfc
[ 12.245720] 00000006 00000000 f582df6c f5b3f500 00000006 f582df94 c02abf49 f582df94
[ 12.245731] c05f400c fffb90d6 00000000 f5b3f500 f5b3f570 00000000 f582dfd0 c02a9a53
[ 12.245743] Call Trace:
[ 12.245756] [<c080ecdd>] dump_stack+0x48/0x69
[ 12.245764] [<c02abab9>] __report_bad_irq+0x29/0xd0
[ 12.245770] [<c02abf49>] note_interrupt+0x1c9/0x210
[ 12.245778] [<c05f400c>] ? add_interrupt_randomness+0x15c/0x190
[ 12.245784] [<c02a9a53>] handle_irq_event_percpu+0xa3/0x1c0
[ 12.245790] [<c02a9ba3>] handle_irq_event+0x33/0x50
[ 12.245795] [<c02ac3b5>] handle_fasteoi_irq+0x75/0x130
[ 12.245801] [<c02ac340>] ? handle_simple_irq+0x70/0x70
[ 12.245807] [<c0204b11>] handle_irq+0x71/0x90
[ 12.245811] <IRQ> [<c081603c>] do_IRQ+0x3c/0xd0
[ 12.245822] [<c08155b3>] common_interrupt+0x33/0x38
[ 12.245830] [<c06e753f>] ? cpuidle_enter_state+0xaf/0x2e0
[ 12.245836] [<c06e77a4>] cpuidle_enter+0x14/0x20
[ 12.245843] [<c02923f3>] call_cpuidle+0x33/0x70
[ 12.245849] [<c029268e>] cpu_startup_entry+0x25e/0x320
[ 12.245855] [<c080743b>] rest_init+0x7b/0x80
[ 12.245862] [<c0b34cd8>] start_kernel+0x456/0x45d
[ 12.245868] [<c0b3464e>] ? set_init_arg+0x52/0x52
[ 12.245874] [<c0b3438c>] i386_start_kernel+0x13a/0x13d
[ 12.245877] handlers:
[ 12.249077] [<f872ac80>] sst_byt_irq [snd_soc_sst_baytrail_pcm] threaded [<f8729360>] sst_byt_irq_thread [snd_soc_sst_baytrail_pcm]
[ 12.252579] Disabling IRQ #6
[ 13.054749] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 13.082595] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 13.088935] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.938992] NET: Registered protocol family 17
[ 16.375557] RTL8723BS: nolinked power save enter
[ 23.134799] loop: module loaded
[ 23.309732] RTL8723BS: nolinked power save leave
[ 24.217075] NET: Registered protocol family 38
[ 24.509010] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem
[ 24.528761] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 24.850469] RTL8723BS: rtw_set_802_11_connect(wlan0) fw_state = 0x00000008
[ 24.925687] fuse init (API version 7.23)
[ 25.072212] RTL8723BS: start auth
[ 25.074255] RTL8723BS: auth success, start assoc
[ 25.077431] RTL8723BS: rtw_cfg80211_indicate_connect(wlan0) BSS not found !!
[ 25.077445] RTL8723BS: assoc success
[ 25.082478] RTL8723BS: send eapol packet
[ 25.090477] RTL8723BS: send eapol packet
[ 25.091758] RTL8723BS: set pairwise key camid:4, addr:00:22:b0:f2:21:8b, kid:0, type:AES
[ 25.095294] RTL8723BS: set group key camid:5, addr:00:22:b0:f2:21:8b, kid:2, type:TKIP
[ 26.594114] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:8e18:d9ff:feff:02f5 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=261 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=221
[ 26.609121] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:8e18:d9ff:feff:02f5 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=432 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=392
[ 26.860042] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:8e18:d9ff:feff:02f5 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=432 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=392
[ 27.110955] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:8e18:d9ff:feff:02f5 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=432 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=392
[ 27.311118] SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=fe80:0000:0000:0000:8e18:d9ff:feff:02f5 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=288 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=248
[ 99.718561] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[ 595.187377] RTL8723BS: send eapol packet
[ 595.188882] RTL8723BS: set group key camid:6, addr:00:22:b0:f2:21:8b, kid:1, type:TKIP
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2015-09-05 16:12 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-09-05 16:12 No sound with Odys Winpad v10 - byt-rt5640 Moritz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).