From: Ronald Horn <Ronald.Horn@web.de>
To: alsa-devel@alsa-project.org, suse@easylinux.de
Subject: Re: ICH9 Sound
Date: Mon, 06 Oct 2008 18:38:07 +0200 [thread overview]
Message-ID: <1952499267@web.de> (raw)
[-- Attachment #1: Type: text/plain, Size: 1799 bytes --]
Hello,
all mixer levels are ok.
I have several times checked all settings. I deinstalled and reinstalled the drivers in yast2, too.
The phenomenon is that then a sound is playing, once an incredible noice is playing over the original sound.
And this sound is stopping first about ten seconds after I closed the player. It's like an feedback loop.
Greetings
Ronald
> ICH9 sound should be supported. And, as you see, your card is
> detected. Perhaps the codec or that specific notebook isn't supported.
> Are you sure mixer levels are adjusted properly?
> > I'm using a HP Pavilion dv7-1045eg. The Problem is I have no sound,
> > because there is no driver witch works.
> > Here are some reports from my system:
> > /
> > lspci -nv/
> > 00:1b.0 0403: 8086:293e (rev 03)
> > Subsystem: 103c:30f4
> > Flags: bus master, fast devsel, latency 0, IRQ 22
> > Memory at df300000 (64-bit, non-prefetchable) [size=16K]
> > Capabilities: [50] Power Management version 2
> > Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
> > Queue=0/0 Enable+
> > Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
> > Capabilities: [100] Virtual Channel <?>
> > Capabilities: [130] Root Complex Link <?>
> > Kernel driver in use: HDA Intel
> > Kernel modules: snd-hda-intel
> >
> > /
> > cat /proc/asound/cards/
> > 0 [Intel ]: HDA-Intel - HDA Intel
> > HDA Intel at 0xdf300000 irq 22
> >
> >
> > /head -n 1 /proc/asound/card0/codec*/
> > ==> /proc/asound/card0/codec#0 <==
> > Codec: IDT 92HD71B7X
> > ==> /proc/asound/card0/codec#2 <==
> > Codec: Generic 10de ID 6
> >
> >
> > I'm using openSuse 11.0 with Kernel 2.6.25.16-0.1-pae.
> > Maybe your project could develop some drivers.
[-- Attachment #2: Ronald Horn.vcf --]
[-- Type: text/x-vCard, Size: 99 bytes --]
BEGIN:VCARD
VERSION:2.1
N:Horn;Ronald;;;
FN:Ronald Horn
EMAIL;INTERNET:ronald.horn@web.de
END:VCARD
[-- Attachment #3: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next reply other threads:[~2008-10-06 16:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-06 16:38 Ronald Horn [this message]
-- strict thread matches above, loose matches on Subject: below --
2008-09-27 12:38 ICH9 Sound Ronald Horn
2008-09-29 11:34 ` Vedran Miletić
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1952499267@web.de \
--to=ronald.horn@web.de \
--cc=alsa-devel@alsa-project.org \
--cc=suse@easylinux.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox