From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0000818]: Web browsing in Mozilla causes ADAT clocks on HDSP 9652 to be invalid
Date: Tue, 1 Feb 2005 21:46:46 +0100 [thread overview]
Message-ID: <1fa438ea590ee9e460db0a5030323541@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=818>
======================================================================
Reported By: Mark Knecht
Assigned To: charbonnel
======================================================================
Project: ALSA - driver
Issue ID: 818
Category: PCI - RME HDSP
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
Distribution: FC2
Kernel Version: 2.6.8.1-1.520.2vS7.ll.rhfc2.ccrma
======================================================================
Date Submitted: 01-14-2005 18:35 CET
Last Modified: 02-01-2005 21:46 CET
======================================================================
Summary: Web browsing in Mozilla causes ADAT clocks on HDSP
9652 to be invalid
Description:
In my setup I's using 3 computers:
1) PanetCCRMA with HDSP 9652 as the center of an audio hub
2) Win XP GigaStudio with Hammerfall Light - two ADAT outputs streaming to
HDSP 9652 (ADAT input for clock)
3) Win XP Pro Tools Digi 002 Rack receiving GigaStudio audio from PC
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2
So the signal flow looks like:
XP Linux XP
GSt ====> HDSP 9652 ====> Pro Tools
<=== (ADAT Clock)
The HDSP 9652 is the master clock for the network. Both XP machine sync to
the HDSP 9652.
When no specific audio apps are running on the Linux box then this
configuration will work for hours if not days with no problems. All audio
data from GSt flows through the HDSP 9652's hardware and the hardware
mixer sends it on to the Pro Tools box. It works perfectly.
When Mozilla is started and I switch from page to page, after a few
minutes I will receive a message on the Pro Tools box that the clock
supplied by the HDSP 9652 was invalid. I can browse the same web pages on
either XP box and I do not corrupt the clocks.
======================================================================
----------------------------------------------------------------------
charbonnel - 02-01-05 21:35
----------------------------------------------------------------------
Hi Mark,
>From what I understand, the card is not in use from the alsa point of
view, you just use the matrix routing. Then it may happen when mozilla
encounters a page using flash that wants to output audio, if it's setup to
do so through the hdsp, that it sets a different audio clock (e.g 44100
vs. 48000). This is normal, and happens also under windows from what I
read on the RME forums. The anwser from the support team is invariably
'disable system sounds' or 'don't use the hdsp as the system default audio
device'.
Thomas
----------------------------------------------------------------------
Mark Knecht - 02-01-05 21:46
----------------------------------------------------------------------
Hi Thomas,
Interesting. Best I can tell these days (since I reported this a couple
of weeks ago) is that not all web sites cause Mozilla to do whatever it
does. Many, even most, cause me no problems with the current revision of
Alsa from PlanetCCRMA.
We had some conversations about this on LAU or Alsa-devel - I don't
remember which. Seemed that folks there thought it was possible to extend
Alsa one fo these days to be able to lock down the card's sample rate
instead of letting any app change it. That would be fine with me. I don't
care about OSS audio quality. I just want hdspconf to be in total control
so that I set the card's sample rate and it doesn't change, but maybe
that's for some future date.
Currently I do not use Mozilla when doing important audio stuff but
that forces me to do web browsing on a Windows box instead.
Anyway, thanks for looking into this and thinking about future
improvements.
Cheers,
Mark
Issue History
Date Modified Username Field Change
======================================================================
01-14-05 18:35 Mark Knecht New Issue
01-14-05 18:35 Mark Knecht Distribution => FC2
01-14-05 18:35 Mark Knecht Kernel Version =>
2.6.8.1-1.520.2vS7.ll.rhfc2.ccrma
02-01-05 21:35 charbonnel Note Added: 0003466
02-01-05 21:46 Mark Knecht Note Added: 0003470
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
next reply other threads:[~2005-02-01 20:46 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-01 20:46 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-01-13 0:03 [ALSA - driver 0000818]: Web browsing in Mozilla causes ADAT clocks on HDSP 9652 to be invalid bugtrack
2006-01-12 23:54 bugtrack
2006-01-12 23:17 bugtrack
2005-10-16 20:25 bugtrack
2005-10-16 21:09 ` Eric Shattow
2005-10-16 14:24 bugtrack
2005-10-12 17:08 bugtrack
2005-10-12 17:03 bugtrack
2005-10-12 16:55 bugtrack
2005-10-12 16:50 bugtrack
2005-10-12 16:20 bugtrack
2005-10-12 16:17 bugtrack
2005-10-12 12:17 bugtrack
2005-10-05 16:50 bugtrack
2005-09-28 22:30 bugtrack
2005-09-19 7:58 bugtrack
2005-02-02 9:20 bugtrack
2005-02-01 21:12 bugtrack
2005-02-01 21:07 bugtrack
2005-02-01 21:03 bugtrack
2005-02-01 20:35 bugtrack
2005-01-14 17:35 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1fa438ea590ee9e460db0a5030323541@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox