From: spiral <spiral@laposte.net>
To: alsa-devel@lists.sourceforge.net
Subject: Re: Alsa-devel digest, Vol 1 #3297 - 13 msgs
Date: Thu, 12 May 2005 22:46:08 +0200 [thread overview]
Message-ID: <200505122246.08566.spiral@laposte.net> (raw)
In-Reply-To: <20050512154727.B414212F1B@sc8-sf-spam2.sourceforge.net>
Hi,
I can't have this patch working... I don't manage to set position_fix=1... How
should I do so ? Maybe isn't it up2date on the cvs ?
Anyway, I give a copy of "cat /proc/asound/card0/codec#*" here :
Codec: Realtek ALC880
Address: 0
Vendor Id: 0x10ec0880
Subsystem Id: 0x0
Revision Id: 0x90500
Default PCM: rates 0x560, bits 0x0e, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
Node 0x02 [Audio Output] wcaps 0x411: Stereo
PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x03 [Audio Output] wcaps 0x411: Stereo
PCM: rates 0x560, bits 0x0e, types 0x1
Node 0x04 [Audio Output] wcaps 0x411: Stereo
PCM: rates 0x160, bits 0x0e, types 0x1
Node 0x05 [Audio Output] wcaps 0x411: Stereo
PCM: rates 0x160, bits 0x0e, types 0x1
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
PCM: rates 0x160, bits 0x1e, types 0x1
Node 0x07 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
Amp-In vals: 0x00 0x00
PCM: rates 0x160, bits 0x06, types 0x1
Connection: 7
0x18* 0x19 0x1a 0x1b 0x1c 0x14 0x15
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
Amp-In vals: 0x00 0x00
PCM: rates 0x160, bits 0x06, types 0x1
Connection: 7
0x18 0x19 0x1a* 0x1b 0x1c 0x14 0x15
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
Amp-In vals: 0x00 0x00
PCM: rates 0x160, bits 0x06, types 0x1
Connection: 10
0x18 0x19 0x1a 0x1b 0x1c* 0x0b 0x14 0x15 0x16 0x17
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
PCM: rates 0x160, bits 0x1e, types 0x1
Connection: 1
0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x23, nsteps=0x41, stepsize=0x03, mute=1
Amp-In vals: 0xa3 0xa3
Connection: 8
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: 0x00 0x00
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: 0x40 0x40
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: 0x00 0x00
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: 0x40 0x40
Connection: 2
0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: 0x00 0x00
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: 0x40 0x40
Connection: 2
0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: 0x00 0x00
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: 0x40 0x40
Connection: 2
0x05 0x0b
Node 0x10 [Audio Selector] wcaps 0x300101: Stereo
Connection: 4
0x0c* 0x0d 0x0e 0x0f
Node 0x11 [Audio Selector] wcaps 0x300101: Stereo
Connection: 4
0x0c* 0x0d 0x0e 0x0f
Node 0x12 [Audio Selector] wcaps 0x300101: Stereo
Connection: 4
0x0c* 0x0d 0x0e 0x0f
Node 0x13 [Audio Selector] wcaps 0x300101: Stereo
Connection: 4
0x0c* 0x0d 0x0e 0x0f
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: 0x00 0x00
Pincap 0x083f: IN OUT HP
Pin Default 0x01014020: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 1
0x0c
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: 0x00 0x00
Pincap 0x083f: IN OUT HP
Pin Default 0x01014021: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 1
0x0d
Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: 0x00 0x00
Pincap 0x083f: IN OUT HP
Pin Default 0x01019022: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x40: OUT
Connection: 1
0x0e
Node 0x17 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: 0x80 0x80
Pincap 0x083f: IN OUT HP
Pin Default 0x01013023: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x40: OUT
Connection: 1
0x0f
Node 0x18 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: 0x80 0x80
Pincap 0x08133f: IN OUT HP
Pin Default 0x01a19031: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x20: IN
Connection: 1
0x10
Node 0x19 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: 0x80 0x80
Pincap 0x08133f: IN OUT HP
Pin Default 0x02a19060: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls: 0x20: IN
Connection: 1
0x11
Node 0x1a [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: 0x80 0x80
Pincap 0x08133f: IN OUT HP
Pin Default 0x01813030: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x20: IN
Connection: 1
0x12
Node 0x1b [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: 0x00 0x00
Pincap 0x08133f: IN OUT HP
Pin Default 0x02214050: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 1
0x13
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x9933f170: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = Other
Pin-ctls: 0x00:
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x99f3f180: [Fixed] Other at Int ATAPI
Conn = ATAPI, Color = Other
Pin-ctls: 0x00:
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
Pincap 0x0810: OUT
Pin Default 0x01442100: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Grey
Pin-ctls: 0x00:
Connection: 1
0x06
Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
Pincap 0x0820: IN
Pin Default 0x01c42110: [Jack] SPDIF In at Ext Rear
Conn = RCA, Color = Grey
Pin-ctls: 0x00:
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono
Thanks for your help
Goodbye
--
spiral
Le Jeudi 12 Mai 2005 17:45, alsa-devel-request@lists.sourceforge.net a écrit :
> Date: Thu, 12 May 2005 16:25:02 +0200
> From: Takashi Iwai <tiwai@suse.de>
> To: fab <fab@gnux.info>
> Cc: alsa-devel@lists.sourceforge.net
> Subject: Re: [Alsa-devel] Medion + intel hda tests
>
> At Wed, 11 May 2005 00:02:38 +0200,
>
> fab wrote:
> > Hi,
> > since I reported bugs as well as I can and gave no answers,
>
> Since I've been in vacation and had no net access ;);)
>
> > I started to
> > do some very basic tests and sourcecode reading.
> > I tried to modprobe snd-hda-intel with different "model" option and then
> > tested all the outputs, I only marked the working ones :
> >
> > Availables inputs:
> > [front] [surround] [center] , [headphone]
> > tested model :
> > 3stack : front
> > 3stack-digout : front
> > 5stack : front
> > 5stack-digout : front
> > w810 : front surround
>
> This implies that the pin assignment is different from what the normal
> models suppose.
>
> I added the "test" model for debugging such cases to ALSA CVS.
> Try ALSA CVS version (driver and lib), and set "model=test" module
> option to snd-hda-intel module. Then you'll have fully controllable
> volumes and switches.
>
> The noisy output may be fixed by setting "position_fix=1" or
> "position_fix=2" module option.
>
> Anyway, please show the content of /proc/asound/card0/codec#* file.
>
>
> Takashi
-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_ids93&alloc_id\x16281&op=click
next parent reply other threads:[~2005-05-12 20:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20050512154727.B414212F1B@sc8-sf-spam2.sourceforge.net>
2005-05-12 20:46 ` spiral [this message]
2005-05-13 7:36 ` Re: Alsa-devel digest, Vol 1 #3297 - 13 msgs Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200505122246.08566.spiral@laposte.net \
--to=spiral@laposte.net \
--cc=alsa-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox