From: Rask Ingemann Lambertsen <rask@sygehus.dk>
To: Rene Herman <rene.herman@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>,
ALSA devel <alsa-devel@lists.sourceforge.net>
Subject: Re: isa_bus: sb8
Date: Sun, 18 Mar 2007 01:56:59 +0100 [thread overview]
Message-ID: <20070318005659.GA10328@sygehus.dk> (raw)
In-Reply-To: <45FC79A2.6080807@gmail.com>
On Sun, Mar 18, 2007 at 12:28:34AM +0100, Rene Herman wrote:
> The unfortunate thing is that autoprobe on ISA is a quite horribly bad
> idea...
>
> On a PCI/ISA system you need to know the IRQ and DMA channel(s) the card
> is using _anyway_ since you need to tell the BIOS to not hand those out
> to PCI or ISA-PnP cards (or, in the case of IRQs, even tell it to make
> that IRQ available to ISA).
I have one of those nearly useless AmiBIOSes in a Pentium2 box. It does
nothing for ISA-PnP cards except to print their names. I have forced it to
assign the same IRQ to all PCI cards or I would not have any left for ISA
cards, ISA-PnP or not.
Considering that
1) there are only a few valid SB8 ports, and
2) a wrong port is detected immediately, and
3) there are only three valid DMA channels
I think an IRQ auto-probe is the most useful one of the three. You'd need an
average of 15 attempts to guess IRQ and DMA at the same time (10 possible
IRQs, 3 possible DMAs). AFAIK, autoprobing for IRQ works well in practice.
> By the way -- are you in fact using a SG NX Pro? Not a SG NX Pro 16 or
> some other 16-bit SG? The NX Pro should have an FCCID of I38-MMSD802. If
> you are in fact using a 16-bit SG the card's better of being used in
> it's native WSS mode, though snd-sgalaxy.
The FCCID is I38-SGNXPRO. According to
<URL:http://www.amitech.dk/includes/drivers/lydkort.asp>, all of
I38-SGNXPRO, I38-MMSN802 and I38-MMSD802 are SG NX Pro. The three largest
chips on the board are AZT-NXPMIX0592, AZTSSPT0592-U01 and AZTDSP31H. There
is room for a SCSI controller chip and a SCSI connector. There is a Mitsumi
CDROM interface.
--
Rask Ingemann Lambertsen
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
next prev parent reply other threads:[~2007-03-18 0:56 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-27 21:30 isa_bus: sb8 Rene Herman
2007-03-17 19:58 ` Rask Ingemann Lambertsen
2007-03-17 23:28 ` Rene Herman
2007-03-18 0:56 ` Rask Ingemann Lambertsen [this message]
2007-03-18 21:28 ` Rene Herman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070318005659.GA10328@sygehus.dk \
--to=rask@sygehus.dk \
--cc=alsa-devel@lists.sourceforge.net \
--cc=rene.herman@gmail.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox