From: Jeremy Nickurak <alsa-devel@atrus.rifetech.com>
To: Clemens Ladisch <cladisch@fastmail.net>
Cc: alsa-devel@alsa-project.org
Subject: Re: Altec Lansing FX5051 mixer
Date: Fri, 31 Aug 2007 22:36:09 -0600 [thread overview]
Message-ID: <20070901043609.GA13584@rifetech.com> (raw)
In-Reply-To: <20070828074351.GA26261@rifetech.com>
[-- Attachment #1.1: Type: text/plain, Size: 3651 bytes --]
Precisely the same problems with alsa 1.0.15rc1.
On Tue, Aug 28, 2007 at 01:43:51AM -0600, Jeremy Nickurak wrote:
> On Tue, Aug 28, 2007 at 08:50:00AM +0200, Clemens Ladisch wrote:
> > > bmaControls( 0) 0x15
> > > Mute
> > > Bass
> > > Treble
> > > bmaControls( 1) 0x02
> > > Volume
> > > bmaControls( 2) 0x02
> > > Volume
> > > bmaControls( 3) 0x00
> > > bmaControls( 4) 0x00
> > > bmaControls( 5) 0x00
> > > bmaControls( 6) 0x00
> >
> > These descriptors say that there is a two-channel volume control that
> > applies to the front channels, but I guess it really affects all
> > channels.
> >
> > Please show the output of "amixer contents" for this card.
>
> numid=3,iface=MIXER,name='Tone Control - Bass'
> ; type=INTEGER,access=rw------,values=1,min=0,max=10,step=0
> : values=5
> numid=4,iface=MIXER,name='Tone Control - Treble'
> ; type=INTEGER,access=rw------,values=1,min=0,max=10,step=0
> : values=5
> numid=1,iface=MIXER,name='PCM Playback Switch'
> ; type=BOOLEAN,access=rw------,values=1
> : values=on
> numid=2,iface=MIXER,name='PCM Playback Volume'
> ; type=INTEGER,access=rw---R--,values=2,min=0,max=49,step=0
> : values=48,48
> | dBscale-min=-49.00dB,step=1.00dB,mute=0
>
>
> >
> > > ...
> > > HID Device Descriptor:
> > > bLength 9
> > > bDescriptorType 33
> > > bcdHID 1.00
> > > bCountryCode 0 Not supported
> > > bNumDescriptors 1
> > > bDescriptorType 34 Report
> > > wDescriptorLength 172
> > > Report Descriptor: (length is 172)
> > > Item(Global): Usage Page, data= [ 0x0c ] 12
> > > Consumer
> > > Item(Local ): Usage, data= [ 0x01 ] 1
> > > Consumer Control
> > > Item(Main ): Collection, data= [ 0x01 ] 1
> > > Application
> > > Item(Global): Usage Page, data= [ 0x0c ] 12
> > > Consumer
> > > Item(Local ): Usage, data= [ 0xe2 ] 226
> > > Mute
> > > Item(Local ): Usage, data= [ 0xe9 ] 233
> > > Volume Increment
> > > ...
> >
> > This describes an input device that reports 'key' presses to the
> > computer. I guess the control panel and remote control don't have a
> > direct effect but expect the computer to explicitly change mixer
> > controls when a key is pressed.
>
> Since it works fine in Windows without any non-ms software, would this
> imply that this is somewhat standard behavior?
>
> >
> > However, this shouldn't prevent alsamixer from working.
> >
> > It might be possible that the mixer controls don't have many steps and
> > that the step size used by alsamixer is so small that the device rounds
> > the setting back to the old position. Please try PageUp/Down or Home/
> > End instead of Up/Down keys.
>
> PgUp/PgDown don't do any better on any controls. I seem to be able to
> drop the PCM volume to nothing in practice with End, but Home won't
> restore it. Up/Down immediately brings it back up to 100%. The LED's on
> the control reflect this btw, but alsamixer still reports 98%.
The control pad wouldn't be an especially big deal, if only alsamixer did work right.
--
Jeremy Nickurak -= Email/Jabber: atrus@rifetech.com =-
[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2007-09-01 4:36 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-27 15:23 Altec Lansing FX5051 mixer Jeremy Nickurak
2007-08-27 16:18 ` Clemens Ladisch
2007-08-27 16:36 ` Jeremy Nickurak
[not found] ` <1188283800.25549.1207609489@webmail.messagingengine.com>
[not found] ` <20070828074351.GA26261@rifetech.com>
2007-09-01 4:36 ` Jeremy Nickurak [this message]
-- strict thread matches above, loose matches on Subject: below --
2008-04-03 23:36 Vince Blake
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070901043609.GA13584@rifetech.com \
--to=alsa-devel@atrus.rifetech.com \
--cc=alsa-devel@alsa-project.org \
--cc=cladisch@fastmail.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox