From: "Björn van der Meer" <bvdm@chronovault.net>
To: alsa-devel@alsa-project.org
Subject: Request for Realtek patch - Nvidia MCP51 HDA / ALC883 (10de:026c) Notebook component
Date: Mon, 5 May 2008 08:43:16 +0200 [thread overview]
Message-ID: <200805050843.16538.bvdm@chronovault.net> (raw)
Hello Everyone,
I have above component in my laptop and lack the expertise to add it to to
patch_realtek.c myself.
I think I have collected all the relevant information if one of the developers
wants to give it a try.
My Notebook: Medion 98300 (a.k.a. WAM2030)
(Please note: Medion is not an OEM. The board is nVidia based, OEM thought to
be Wistron. Apparently rarely used sound component?)
Internal speakers
Internal mic - unknown
three jacks: headphone, mic, SPDIF(dual use jack).
Jack Sensing under Windows.
5.1 surround (sounds like the setup should be supported by 3stack-6ch-dig)
lspci:
00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio
[10de:026c] (rev a2)
Subsystem: Wistron Corp. Unknown device [17c0:4079]
Flags: 66MHz, fast devsel, IRQ 20
Memory at c0000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0
Enable-
Capabilities: [6c] HyperTransport: MSI Mapping
hwinfo:
22: PCI 10.1: 0403 Audio device
[Created at pci.296]
UDI: /org/freedesktop/Hal/devices/pci_10de_26c
Unique ID: wRyD.X7XJ3rTjrR3
SysFS ID: /devices/pci0000:00/0000:00:10.1
SysFS BusID: 0000:00:10.1
Hardware Class: sound
Model: "Wistron MCP51 High Definition Audio"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x026c "MCP51 High Definition Audio"
SubVendor: pci 0x17c0 "Wistron Corp."
SubDevice: pci 0x4079
Revision: 0xa2
Driver: "HDA Intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xc0000000-0xc0003fff (rw,non-prefetchable)
IRQ: 20 (195693 events)
Module Alias: "pci:v000010DEd0000026Csv000017C0sd00004079bc04sc03i00"
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=new, avail=yes, need=no, active=unknown
alsa-info.sh output is at http://pastebin.com/f49962c92.
Currently the only thing working is output via the internal speakers.
Thank you very much, B.
--
Björn van der Meer
bvdm@chronovault.net
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next reply other threads:[~2008-05-05 6:43 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-05 6:43 Björn van der Meer [this message]
2008-05-08 16:44 ` Request for Realtek patch - Nvidia MCP51 HDA / ALC883 (10de:026c) Notebook component Takashi Iwai
2008-05-09 13:35 ` Björn van der Meer
2008-05-09 13:45 ` Takashi Iwai
-- strict thread matches above, loose matches on Subject: below --
2008-05-09 15:22 Björn van der Meer
2008-05-09 16:13 ` Tobin Davis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200805050843.16538.bvdm@chronovault.net \
--to=bvdm@chronovault.net \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox