Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Wu Fengguang <fengguang.wu@intel.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
	Shane W <shane-alsa@csy.ca>
Subject: Re: [PATCH 0/4] Intel HDMI audio fixes
Date: Thu, 12 Feb 2009 09:25:04 +0800	[thread overview]
Message-ID: <20090212012504.GA6387@localhost> (raw)
In-Reply-To: <s5hfxik8ukn.wl%tiwai@suse.de>

On Thu, Feb 12, 2009 at 12:42:00AM +0200, Takashi Iwai wrote:
> At Wed, 11 Feb 2009 14:32:41 -0800,
> Shane W wrote:
> > 
> > On Wed, Feb 11, 2009 at 03:22:27PM +0800, Wu Fengguang wrote:
> > > Shane: the first two patches should address the two bugs you reported, i.e.
> > > - multi-channel HDMI audio playback problem
> > > - first half-second audio samples missing
> > > These two bugs was reproduced and fixed in the combination of
> > > G35 SDVO HDMI + Yamaha RX-V1800 AV receiver. The first problem cannot be
> > > verified in G45 system because we still cannot make G45 work with
> > > Yamaha. The second problem is interesting in that it can be fixed by the
> > > second patch in G35, but still remains in G45.
> > 
> > Hi,
> > 
> > Ok mixed results here.  I'm using this for my test signal:
> > http://www.csy.ca/~shane/51test.wav
> > 
> > when using:
> > aplay -D hw:0,3 51test.wav
> > 
> > Front and rear left and right are correct but centre is
> > missing.  The order in the wav is:
> > front left
> > centre
> > front right
> > rear left
> > rear right
> > sub buz
> 
> The order assumed here doesn't match with ALSA mapping.
> In ALSA,
>   front left
>   front right
>   rear left
>   rear right
>   center
>   LFE
>   
> Better to test with speaker-test program whether the mapping is
> correct.

Hi Takashi,

Yes I've not yet taken care of the channel orders, so disorders are expected.

Before beginning our discussion, I'd like to first submit a patch for
speaker-test. I guess the ordering in it defines the ALSA order.

Thanks,
Fengguang
---
speaker-test.c - add readability comments to speaker channels

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
---

diff --git a/speaker-test/speaker-test.c b/speaker-test/speaker-test.c
index 57a7cbc..bf97d33 100644
--- a/speaker-test/speaker-test.c
+++ b/speaker-test/speaker-test.c
@@ -84,48 +84,48 @@ static const char *given_test_wav_file = NULL;
 static char *wav_file_dir = SOUNDSDIR;
 
 static const char        *channel_name[MAX_CHANNELS] = {
-  N_("Front Left"),
-  N_("Front Right"),
-  N_("Rear Left"),
-  N_("Rear Right"),
-  N_("Center"),
-  N_("LFE"),
-  N_("Side Left"),
-  N_("Side Right"),
-  N_("Channel 9"),
-  N_("Channel 10"),
-  N_("Channel 11"),
-  N_("Channel 12"),
-  N_("Channel 13"),
-  N_("Channel 14"),
-  N_("Channel 15"),
-  N_("Channel 16")
+  /*  0 */ N_("Front Left"),
+  /*  1 */ N_("Front Right"),
+  /*  2 */ N_("Rear Left"),
+  /*  3 */ N_("Rear Right"),
+  /*  4 */ N_("Center"),
+  /*  5 */ N_("LFE"),
+  /*  6 */ N_("Side Left"),
+  /*  7 */ N_("Side Right"),
+  /*  8 */ N_("Channel 9"),
+  /*  9 */ N_("Channel 10"),
+  /* 10 */ N_("Channel 11"),
+  /* 11 */ N_("Channel 12"),
+  /* 12 */ N_("Channel 13"),
+  /* 13 */ N_("Channel 14"),
+  /* 14 */ N_("Channel 15"),
+  /* 15 */ N_("Channel 16")
 };
 
 static const int	channels4[] = {
-  0,
-  1,
-  3,
-  2
+  0, /* Front Left  */
+  1, /* Front Right */
+  3, /* Rear Right  */
+  2, /* Rear Left   */
 };
 static const int	channels6[] = {
-  0,
-  4,
-  1,
-  3,
-  2,
-  5
-}; 
+  0, /* Front Left  */
+  4, /* Center      */
+  1, /* Front Right */
+  3, /* Rear Right  */
+  2, /* Rear Left   */
+  5, /* LFE         */
+};
 static const int	channels8[] = {
-  0,
-  4,
-  1,
-  7,
-  3,
-  2,
-  6,
-  5
-}; 
+  0, /* Front Left  */
+  4, /* Center      */
+  1, /* Front Right */
+  7, /* Side Right  */
+  3, /* Rear Right  */
+  2, /* Rear Left   */
+  6, /* Side Left   */
+  5, /* LFE         */
+};
 
 static void generate_sine(uint8_t *frames, int channel, int count, double *_phase) {
   double phase = *_phase;

  parent reply	other threads:[~2009-02-12  1:25 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-02-11  7:22 [PATCH 0/4] Intel HDMI audio fixes Wu Fengguang
2009-02-11  7:22 ` [PATCH 1/4] hda - allow multi-channel HDMI audio playback when ELD is not present Wu Fengguang
2009-02-11  7:22 ` [PATCH 2/4] hda - enable HDMI audio pin out at module loading time Wu Fengguang
2009-02-11  7:22 ` [PATCH 3/4] hda - compute checksum in HDMI audio infoframe Wu Fengguang
2009-02-11  7:22 ` [PATCH 4/4] hda - add id for Intel IbexPeak integrated HDMI codec Wu Fengguang
2009-02-11  8:10 ` [PATCH 0/4] Intel HDMI audio fixes Takashi Iwai
2009-02-11  8:20   ` Wu Fengguang
     [not found] ` <20090211223241.GA31322@csy.ca>
2009-02-11 22:42   ` Takashi Iwai
     [not found]     ` <20090211225448.GA32203@csy.ca>
2009-02-11 23:02       ` Takashi Iwai
2009-02-12  4:41         ` Wu Fengguang
     [not found]           ` <20090213172821.GA843@csy.ca>
2009-02-14 10:28             ` Takashi Iwai
2009-02-12  1:25     ` Wu Fengguang [this message]
2009-02-12  7:54       ` Takashi Iwai
2009-02-12  7:58         ` Wu Fengguang
2009-02-20 13:05         ` [PATCH] speaker-test.c - add readability comments to speaker channels Wu Fengguang
2009-02-20 17:07           ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090212012504.GA6387@localhost \
    --to=fengguang.wu@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=shane-alsa@csy.ca \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox