From: "Andreas Nüßlein" <nutz@unfoog.de>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org
Subject: Re: No sound with nVidia Corporation MCP79 High Definition Audio (rev b1) (Macbook Pro 5, 5)
Date: Fri, 3 Jul 2009 13:25:06 +0200 [thread overview]
Message-ID: <200907031325.06421.nutz@unfoog.de> (raw)
In-Reply-To: <s5htz1uconc.wl%tiwai@suse.de>
[-- Attachment #1: Type: text/plain, Size: 1364 bytes --]
On Friday 03 July 2009 07:37:59 you wrote:
> At Thu, 2 Jul 2009 19:37:43 +0200,
>
> Andreas Nüßlein wrote:
> > On Thursday 02 July 2009 15:15:34 you wrote:
> > > At Thu, 2 Jul 2009 12:54:47 +0200,
> > >
> > > Andreas Nüßlein wrote:
> > > > but i can't get any sound eventhough all channels are unmuted and
> > > > turned up to 100.
> > > >
> > > > i also aplay -Dfoo file.wav again, where foo =
> > > > default,front,surround40,.... , but i always get: aplay: main:608:
> > > > audio open error: Invalid argument
> > >
> > > The error is strange. Did you build with --enable-dynamic-minors
> > > configure option?
> > >
> > > Otherwise the codec registers look OK.
> >
> > hmmm.. well whenever i really build this manually ( ./configure --with-
> > cards=hda-intel && make && sudo make install) i can't load the modules,
> > because i get:
> > [ 1526.091642] snd: Unknown symbol unregister_sound_special
> > [ 1526.092374] snd: Unknown symbol register_sound_special_device
>
so i finally figured out, the problem with "Unknown symbol
unregister_sound_special": the ebuild always used "--without-oss". as soon as
i applied that to my manual ./configure i was able to load the modules. however
now dmesg throws some errors - i attached them to this mail. i'm a little
confused why there's still my build-dir in the errors,
[-- Attachment #2: dmesg_tail.txt --]
[-- Type: text/plain, Size: 1450 bytes --]
[30518.015451] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 23 (level, low) -> IRQ 23
[30518.015513] HDA Intel 0000:00:08.0: setting latency timer to 64
[30518.176350] ALSA /home/nutz/tmp/alsa/alsa-driver-unstable/pci/hda/../../alsa-kernel/pci/hda/hda_codec.c:3844: autoconfig: line_outs=1 (0xa/0x0/0x0/0x0/0x0)
[30518.176366] ALSA /home/nutz/tmp/alsa/alsa-driver-unstable/pci/hda/../../alsa-kernel/pci/hda/hda_codec.c:3848: speaker_outs=1 (0xb/0x0/0x0/0x0/0x0)
[30518.176379] ALSA /home/nutz/tmp/alsa/alsa-driver-unstable/pci/hda/../../alsa-kernel/pci/hda/hda_codec.c:3852: hp_outs=1 (0x9/0x0/0x0/0x0/0x0)
[30518.176391] ALSA /home/nutz/tmp/alsa/alsa-driver-unstable/pci/hda/../../alsa-kernel/pci/hda/hda_codec.c:3853: mono: mono_out=0x0
[30518.176401] ALSA /home/nutz/tmp/alsa/alsa-driver-unstable/pci/hda/../../alsa-kernel/pci/hda/hda_codec.c:3856: dig-out=0x10/0x15
[30518.176411] ALSA /home/nutz/tmp/alsa/alsa-driver-unstable/pci/hda/../../alsa-kernel/pci/hda/hda_codec.c:3864: inputs: mic=0xd, fmic=0x0, line=0xc, fline=0x0, cd=0x0, aux=0x0
[30518.176425] ALSA /home/nutz/tmp/alsa/alsa-driver-unstable/pci/hda/../../alsa-kernel/pci/hda/hda_codec.c:3866: dig-in=0x12
[30518.479301] ALSA /home/nutz/tmp/alsa/alsa-driver-unstable/acore/pcm_native.c:2056: snd_pcm_hw_constraints_complete failed
[30518.479750] ALSA /home/nutz/tmp/alsa/alsa-driver-unstable/acore/pcm_native.c:2056: snd_pcm_hw_constraints_complete failed
[-- Attachment #3: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2009-07-03 11:25 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-29 22:04 No sound with nVidia Corporation MCP79 High Definition Audio (rev b1) (Macbook Pro 5, 5) Sean Burke
2009-06-30 5:58 ` Takashi Iwai
2009-07-01 15:00 ` Andreas Nüßlein
2009-07-02 9:45 ` Takashi Iwai
2009-07-02 10:54 ` Andreas Nüßlein
2009-07-02 10:57 ` Takashi Iwai
2009-07-02 13:15 ` Takashi Iwai
2009-07-02 17:37 ` Andreas Nüßlein
2009-07-03 5:37 ` Takashi Iwai
2009-07-03 11:25 ` Andreas Nüßlein [this message]
2009-07-03 13:15 ` Takashi Iwai
[not found] ` <200907061459.09745.nutz@unfoog.de>
[not found] ` <s5hy6r2exs2.wl%tiwai@suse.de>
2009-07-06 14:03 ` Andreas Nüßlein
2009-07-06 14:16 ` Takashi Iwai
[not found] ` <200907061636.10288.nutz@unfoog.de>
2009-07-06 14:47 ` Takashi Iwai
[not found] ` <200907061703.52699.nutz@unfoog.de>
2009-07-06 15:13 ` Takashi Iwai
[not found] ` <200907061723.18123.nutz@unfoog.de>
2009-07-06 15:43 ` Takashi Iwai
[not found] ` <200907061753.47013.nutz@unfoog.de>
2009-07-06 16:12 ` Takashi Iwai
2009-07-06 17:16 ` Sean Burke
2009-07-06 19:26 ` Takashi Iwai
[not found] ` <200907062214.56736.nutz@unfoog.de>
2009-07-07 6:00 ` Takashi Iwai
[not found] ` <4A52EA33.1090808@gmail.com>
2009-07-07 6:38 ` Takashi Iwai
2009-07-07 9:47 ` Takashi Iwai
[not found] ` <200907071149.57736.nutz@unfoog.de>
2009-07-07 10:53 ` Takashi Iwai
2009-07-08 14:49 ` Takashi Iwai
[not found] ` <200907081811.29710.nutz@unfoog.de>
2009-07-09 7:18 ` Takashi Iwai
2009-07-10 0:27 ` Andreas Nüßlein
2009-07-10 0:29 ` Andreas Nüßlein
2009-07-16 13:49 ` Takashi Iwai
-- strict thread matches above, loose matches on Subject: below --
2009-06-27 1:16 Andreas Nuesslein
2009-06-29 7:24 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200907031325.06421.nutz@unfoog.de \
--to=nutz@unfoog.de \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox