VIA 82C686B AC'97 controller initialization

["Gerhard Pircher" <gerhard_pircher@gmx.net>]

Hi,

I'm trying to get AC'97 sound working on my AmigaOne PowerPC machine with
a VIA 82C686B southbridge and a SigmaTel STAC9752 codec. The firmware
doesn't initialize the AC'97 controller at all. Thus I had to implement
some PCI quirks, which first setup the I/O BARs of the AC'97 PCI device
and secondly power up the AC'97 controller by triggering a soft resume
event through the southbridge's ACPI controller. This seems to work fine
so far, but playback works in slow motion when I first power up the
machine. After a warm reset audio playback sounds normal.
Does somebody know how to fix this problem or were the problem could be?

BTW can the snd-via82xx and snd-via82xx-modem drivers be used at the same
time?

Thanks

Gerhard

p.s.: Please put me on CC:, as I'm not subscribed to this mailing list.
-- 
Neu: GMX Doppel-FLAT mit Internet-Flatrate + Telefon-Flatrate
für nur 19,99 Euro/mtl.!* http://portal.gmx.net/de/go/dsl02