From: Marek Vasut <marek.vasut@gmail.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: Re: [PATCH] Allow passing platform_data to devices attached to AC97 bus
Date: Tue, 21 Jul 2009 19:40:21 +0200 [thread overview]
Message-ID: <200907211940.21638.marek.vasut@gmail.com> (raw)
In-Reply-To: <s5hd47u2hjc.wl%tiwai@suse.de>
[-- Attachment #1: Type: text/plain, Size: 1126 bytes --]
Dne Út 21. července 2009 17:16:07 Takashi Iwai napsal(a):
> At Tue, 21 Jul 2009 15:53:23 +0100,
>
> Mark Brown wrote:
> > On Tue, Jul 21, 2009 at 04:50:26PM +0200, Takashi Iwai wrote:
> > > Marek Vasut wrote:
> > > > int ret;
> > > > + pxa2xx_audio_ops_t *pdata = dev->dev.platform_data;
> > >
> > > Use the get function.
> >
> > There's no such function in mainline right now. However, apropos of
> > something else I submitted a patch adding that to the driver core - it's
> > been merged for 2.6.32 but won't be available in ALSA until after the
> > next merge window. The function is dev_get_platdata().
>
> Ah, right. This can be fixed later, then.
>
> > > Also, at the next time, add Russell or linux-arm to Cc so that he
> > > knows at least that a file in arch/arm will be changed.
> >
> > Ideally split things into two separate patches.
>
> Agreed.
>
>
> Takashi
Also, another patch (depends on previous two). This one converts wm97xx driver
to use supplied platform_data. This will have a follow-up patch that converts
all the platforms to supply the platform_data properly.
[-- Attachment #2: 0001-Convert-WM97xx-driver-to-use-platform_data.patch --]
[-- Type: text/x-patch, Size: 5046 bytes --]
From 833cb3050e05bc1a2ed3445533d5fe44188364e7 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Tue, 21 Jul 2009 18:52:28 +0200
Subject: [PATCH 1/2] Convert WM97xx driver to use platform_data
This patch converts the wm97xx driver to use platform_data supplied by
ac97 bus. Also, this fixes the related wm97xx-battery driver to use
it's platform_data and prepares a structure for touchscreen driver.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
drivers/input/touchscreen/wm97xx-core.c | 3 +++
drivers/power/wm97xx_battery.c | 13 ++++---------
include/linux/wm97xx.h | 30 ++++++++++++++++++++++++++++++
include/linux/wm97xx_batt.h | 26 --------------------------
4 files changed, 37 insertions(+), 35 deletions(-)
delete mode 100644 include/linux/wm97xx_batt.h
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index 252eb11..e379479 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -561,6 +561,7 @@ static void wm97xx_ts_input_close(struct input_dev *idev)
static int wm97xx_probe(struct device *dev)
{
struct wm97xx *wm;
+ struct wm97xx_pdata *pdata = dev->platform_data;
int ret = 0, id = 0;
wm = kzalloc(sizeof(struct wm97xx), GFP_KERNEL);
@@ -658,6 +659,7 @@ static int wm97xx_probe(struct device *dev)
}
platform_set_drvdata(wm->battery_dev, wm);
wm->battery_dev->dev.parent = dev;
+ wm->battery_dev->dev.platform_data = pdata->batt_pdata;
ret = platform_device_add(wm->battery_dev);
if (ret < 0)
goto batt_reg_err;
@@ -671,6 +673,7 @@ static int wm97xx_probe(struct device *dev)
}
platform_set_drvdata(wm->touch_dev, wm);
wm->touch_dev->dev.parent = dev;
+ wm->touch_dev->dev.platform_data = pdata->touch_pdata;
ret = platform_device_add(wm->touch_dev);
if (ret < 0)
goto touch_reg_err;
diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c
index 8bde921..66af868 100644
--- a/drivers/power/wm97xx_battery.c
+++ b/drivers/power/wm97xx_battery.c
@@ -22,13 +22,12 @@
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
static DEFINE_MUTEX(bat_lock);
static struct work_struct bat_work;
struct mutex work_lock;
static int bat_status = POWER_SUPPLY_STATUS_UNKNOWN;
-static struct wm97xx_batt_info *pdata;
+static struct wm97xx_batt_pdata *pdata;
static enum power_supply_property *prop;
static unsigned long wm97xx_read_bat(struct power_supply *bat_ps)
@@ -150,13 +149,15 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev)
int props = 1; /* POWER_SUPPLY_PROP_PRESENT */
int i = 0;
+ pdata = dev->dev.platform_data;
+
if (dev->id != -1)
return -EINVAL;
mutex_init(&work_lock);
if (!pdata) {
- dev_err(&dev->dev, "Please use wm97xx_bat_set_pdata\n");
+ dev_err(&dev->dev, "No platform_data supplied\n");
return -EINVAL;
}
@@ -258,12 +259,6 @@ static void __exit wm97xx_bat_exit(void)
platform_driver_unregister(&wm97xx_bat_driver);
}
-void __init wm97xx_bat_set_pdata(struct wm97xx_batt_info *data)
-{
- pdata = data;
-}
-EXPORT_SYMBOL_GPL(wm97xx_bat_set_pdata);
-
module_init(wm97xx_bat_init);
module_exit(wm97xx_bat_exit);
diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h
index 0c98781..746edfa 100644
--- a/include/linux/wm97xx.h
+++ b/include/linux/wm97xx.h
@@ -293,6 +293,36 @@ struct wm97xx {
u16 suspend_mode; /* PRP in suspend mode */
};
+struct wm97xx_batt_pdata {
+ int batt_aux;
+ int temp_aux;
+ int charge_gpio;
+ int min_voltage;
+ int max_voltage;
+ int batt_div;
+ int batt_mult;
+ int temp_div;
+ int temp_mult;
+ int batt_tech;
+ char *batt_name;
+};
+
+struct wm97xx_touch_pdata {
+ int irq;
+ bool irq_inverted;
+
+ int cont_rate;
+ int pen_int;
+ int pressure;
+ int ac97_touch_slot;
+
+};
+
+struct wm97xx_pdata {
+ struct wm97xx_batt_pdata *batt_pdata; /* battery data */
+ struct wm97xx_touch_pdata *touch_pdata;
+};
+
/*
* Codec GPIO access (not supported on WM9705)
* This can be used to set/get codec GPIO and Virtual GPIO status.
diff --git a/include/linux/wm97xx_batt.h b/include/linux/wm97xx_batt.h
deleted file mode 100644
index 9681d1a..0000000
--- a/include/linux/wm97xx_batt.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _LINUX_WM97XX_BAT_H
-#define _LINUX_WM97XX_BAT_H
-
-#include <linux/wm97xx.h>
-
-struct wm97xx_batt_info {
- int batt_aux;
- int temp_aux;
- int charge_gpio;
- int min_voltage;
- int max_voltage;
- int batt_div;
- int batt_mult;
- int temp_div;
- int temp_mult;
- int batt_tech;
- char *batt_name;
-};
-
-#ifdef CONFIG_BATTERY_WM97XX
-void __init wm97xx_bat_set_pdata(struct wm97xx_batt_info *data);
-#else
-static inline void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data) {}
-#endif
-
-#endif
--
1.6.3.3
[-- Attachment #3: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2009-07-21 17:40 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-21 14:33 [PATCH] Allow passing platform_data to devices attached to AC97 bus Marek Vasut
2009-07-21 14:50 ` Takashi Iwai
2009-07-21 14:53 ` Mark Brown
2009-07-21 15:16 ` Takashi Iwai
2009-07-21 15:40 ` Marek Vasut
2009-07-21 18:30 ` Mark Brown
2009-07-21 19:51 ` Marek Vasut
2009-07-22 10:40 ` Mark Brown
2009-07-22 10:59 ` [PATCH 1/4] " Marek Vasut
2009-07-23 10:16 ` Mark Brown
2009-07-23 10:28 ` Takashi Iwai
2009-07-23 10:31 ` Mark Brown
2009-07-21 20:24 ` [PATCH] " Marek Vasut
2009-07-21 20:59 ` Takashi Iwai
2009-07-21 21:53 ` Marek Vasut
2009-07-21 22:13 ` Marek Vasut
2009-07-21 22:33 ` Russell King - ARM Linux
2009-07-21 22:39 ` Marek Vasut
2009-07-21 22:40 ` Marek Vasut
2009-07-21 22:34 ` Anton Vorontsov
2009-07-21 22:43 ` Marek Vasut
2009-07-22 11:01 ` [PATCH 1/4] " Marek Vasut
2009-07-22 11:02 ` [PATCH 2/4] Allow passing platform_data for pxa2xx-ac97 Marek Vasut
2009-07-23 10:27 ` Mark Brown
2009-07-23 14:16 ` Marek Vasut
2009-07-23 15:14 ` Mark Brown
2009-07-23 18:39 ` Marek Vasut
2009-07-28 5:28 ` Marek Vasut
2009-07-30 0:55 ` Marek Vasut
2009-08-13 20:40 ` Mark Brown
2009-08-13 23:34 ` Marek Vasut
2009-08-13 23:42 ` Anton Vorontsov
2009-08-14 8:57 ` Mark Brown
2009-07-22 11:04 ` [PATCH 3/4] Convert WM97xx driver to use platform_data Marek Vasut
2009-07-23 11:49 ` Mark Brown
2009-07-24 19:44 ` Robert Jarzmik
2009-07-24 21:03 ` Marek Vasut
2009-07-22 11:05 ` [PATCH 4/4] Convert all platforms to pass platform_data to wm97xx battery Marek Vasut
2009-07-22 18:09 ` Robert Jarzmik
2009-07-22 18:30 ` Marek Vasut
2009-07-25 20:55 ` Robert Jarzmik
2009-07-27 0:06 ` Marek Vasut
2009-07-21 20:25 ` [PATCH] Allow passing platform_data to devices attached to AC97 bus Marek Vasut
2009-07-21 15:41 ` Marek Vasut
2009-07-21 17:40 ` Marek Vasut [this message]
2009-07-21 18:27 ` Mark Brown
2009-07-21 18:38 ` Mark Brown
2009-07-21 17:42 ` Marek Vasut
2009-07-21 18:18 ` Marek Vasut
2009-07-21 15:11 ` Robert Jarzmik
2009-07-21 15:17 ` Takashi Iwai
2009-07-25 20:56 ` Robert Jarzmik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200907211940.21638.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox