Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Munzir Taha (منذر طه)" <munzirtaha@gmail.com>
To: alsa-devel@alsa-project.org
Cc: Takashi Iwai <tiwai@suse.de>
Subject: Re: Problems with Intel HDA driver
Date: Sun, 27 Sep 2009 23:27:57 +0300	[thread overview]
Message-ID: <200909272327.57943.munzirtaha@gmail.com> (raw)

Hi Takashi,
Sorry, the correct link to alsa-info report is

http://www.alsa-project.org/db/?f=2e50beab11390b9687490feae899217710e81afa

On Yaum al-Ithnain 24 Ramadan 1430 4:23:05 pm Takashi Iwai wrote:
> At Mon, 14 Sep 2009 15:15:53 +0200,
> 
> I wrote:
> > At Mon, 14 Sep 2009 16:15:02 +0300,
> >
> > Ozan Çağlayan wrote:
> > > Takashi Iwai wrote On 14-09-2009 15:36:
> > > > Yeah, I think we can add EAPD handling as default for IDT92HD71xx
> > > > codecs.  I've never seen machines that can't live with GPIO0 bit up.
> > >
> > > enable_msi doesn't seem to affect the auto-muting problem. I played
> > > with every single node in hda-analyzer but can't get auto-mute work. I
> > > can manually mute the HP output and the internal speakers by
> > > checking/unchecking OUT checkboxes on relevant NIDs. There's a 8xn
> > > matrix for GPIO settings, I played with them as well to set unsol but
> > > nope.
> > >
> > > I want to remember that dell-m4-1 makes automute work but breaks the
> > > mixer channels:
> > >
> > > http://www.spinics.net/lists/alsa-devel/msg26714.html
> > >
> > > Err, I know that I didn't answer the last question in the thread as I'm
> > > a little bit lost in the NID pool and didn't have time to investigate
> > > further.
> >
> > Could you check whether this still valid?
> >
> > Basically the model option doesn't change the auto-mute behavior.
> > It just changes which pin to be detected and which pin to mute.
> > So, if model=dell-m4-1 makes the auto-muting working, it means
> > that the BIOS setup is broken.
> 
> I looked through alsa-info output now, and found the culprit.
> NID 0x0f is set as a line-out, and currently the driver doesn't
> don't do auto-muting for line-out unless a headphone is present.
> Changing it to a headphone should fix.  Or you can give hp_detect=1
> hint via sysfs and reconfigure.
> 
> 
> Takashi



-- 
Munzir Taha
Telecommunications and Electronics Engineer
Master CIW Designer, ICDL, MOUS, Linux+, LPI, SCSA
Riyadh, SA
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

             reply	other threads:[~2009-09-27 20:28 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-09-27 20:27 Munzir Taha (منذر طه) [this message]
2009-09-27 20:44 ` Problems with Intel HDA driver Daniel Chen
2009-09-27 21:01   ` Munzir Taha (منذر طه)
2009-09-27 21:03     ` Daniel Chen
2009-09-27 21:31       ` Munzir Taha (منذر طه)
2009-09-27 21:53         ` Daniel Chen
2009-09-27 21:58           ` Munzir Taha (منذر طه)
  -- strict thread matches above, loose matches on Subject: below --
2009-09-14 11:33 Andrius Štikonas
2009-09-14 12:25 ` Takashi Iwai
2009-09-14 12:36   ` Ozan Çağlayan
2009-09-14 12:36     ` Takashi Iwai
2009-09-14 13:15       ` Ozan Çağlayan
2009-09-14 13:15         ` Takashi Iwai
2009-09-14 13:23           ` Takashi Iwai
2009-09-14 13:41             ` Ozan Çağlayan
2009-09-14 13:46               ` Takashi Iwai
2009-09-15  9:04                 ` Ozan Çağlayan
2009-09-15 12:58                   ` Takashi Iwai
2009-09-27 20:23             ` Munzir Taha (منذر طه)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200909272327.57943.munzirtaha@gmail.com \
    --to=munzirtaha@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox