From: Giuliano Pochini <pochini@shiny.it>
To: alsa-devel@alsa-project.org
Subject: [PATCH 2/5] Echoaudio - add suspend/resume support
Date: Sat, 30 Jan 2010 16:31:55 +0100 [thread overview]
Message-ID: <20100130163155.266126d3@Jay> (raw)
2/4 Add firmware cache #2:
This patch changes get_firmware(), free_firmware() and adds
free_firmware_cache(). The first two functions implement a very
simple cache and the latter is used to actually release all the
stored firmwares when the module is unloaded.
When CONFIG_PM is not enabled those functions act as before, that
is free_firmware() releases the firmware immediately and
free_firmware_cache() does nothing.
Short description:
This patch implements a simple cache for the firmware files when CONFIG_PM is defined.
Signed-off-by: Giuliano Pochini <pochini@shiny.it>
diff -dup alsa-driver-1.0.22.1__orig//alsa-kernel/pci/echoaudio/echoaudio.c alsa-driver-1.0.22.1/alsa-kernel/pci/echoaudio/echoaudio.c
--- alsa-driver-1.0.22.1__orig//alsa-kernel/pci/echoaudio/echoaudio.c 2010-01-29 23:08:13.000000000 +0100
+++ alsa-driver-1.0.22.1/alsa-kernel/pci/echoaudio/echoaudio.c 2010-01-29 23:09:09.000000000 +0100
@@ -43,12 +43,24 @@ static int get_firmware(const struct fir
{
int err;
char name[30];
- const struct firmware *frm = &card_fw[fw_index];
- DE_ACT(("firmware requested: %s\n", frm->data));
- snprintf(name, sizeof(name), "ea/%s", frm->data);
- if ((err = request_firmware(fw_entry, name, pci_device(chip))) < 0)
+#ifdef CONFIG_PM
+ if (chip->fw_cache[fw_index]) {
+ DE_ACT(("firmware requested: %s is cached\n", card_fw[fw_index].data));
+ *fw_entry = chip->fw_cache[fw_index];
+ return 0;
+ }
+#endif
+
+ DE_ACT(("firmware requested: %s\n", card_fw[fw_index].data));
+ snprintf(name, sizeof(name), "ea/%s", card_fw[fw_index].data);
+ err = request_firmware(fw_entry, name, pci_device(chip));
+ if (err < 0)
snd_printk(KERN_ERR "get_firmware(): Firmware not available (%d)\n", err);
+#ifdef CONFIG_PM
+ else
+ chip->fw_cache[fw_index] = *fw_entry;
+#endif
return err;
}
@@ -56,8 +68,29 @@ static int get_firmware(const struct fir
static void free_firmware(const struct firmware *fw_entry)
{
+#ifdef CONFIG_PM
+ DE_ACT(("firmware not released (kept in cache)\n"));
+#else
release_firmware(fw_entry);
DE_ACT(("firmware released\n"));
+#endif
+}
+
+
+
+static void free_firmware_cache(struct echoaudio *chip)
+{
+#ifdef CONFIG_PM
+ int i;
+
+ for (i = 0; i < 8 ; i++)
+ if (chip->fw_cache[i]) {
+ release_firmware(chip->fw_cache[i]);
+ DE_ACT(("release_firmware(%d)\n", i));
+ }
+
+ DE_ACT(("firmware_cache released\n"));
+#endif
}
@@ -1880,6 +1913,7 @@ static int snd_echo_free(struct echoaudi
pci_disable_device(chip->pci);
/* release chip data */
+ free_firmware_cache(chip);
kfree(chip);
DE_INIT(("Chip freed.\n"));
return 0;
diff -dup alsa-driver-1.0.22.1__orig//alsa-kernel/pci/echoaudio/echoaudio.h alsa-driver-1.0.22.1/alsa-kernel/pci/echoaudio/echoaudio.h
--- alsa-driver-1.0.22.1__orig//alsa-kernel/pci/echoaudio/echoaudio.h 2010-01-29 23:08:13.000000000 +0100
+++ alsa-driver-1.0.22.1/alsa-kernel/pci/echoaudio/echoaudio.h 2010-01-29 23:08:36.000000000 +0100
@@ -449,6 +449,9 @@ struct echoaudio {
volatile u32 __iomem *dsp_registers; /* DSP's register base */
u32 active_mask; /* Chs. active mask or
* punks out */
+#ifdef CONFIG_PM
+ const struct firmware *fw_cache[8]; /* Cached firmwares */
+#endif
#ifdef ECHOCARD_HAS_MIDI
u16 mtc_state; /* State for MIDI input parsing state machine */
--
Giuliano.
next reply other threads:[~2010-01-30 15:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-30 15:31 Giuliano Pochini [this message]
-- strict thread matches above, loose matches on Subject: below --
2010-02-14 17:15 [PATCH 2/5] Echoaudio - add suspend/resume support Giuliano Pochini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100130163155.266126d3@Jay \
--to=pochini@shiny.it \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).