[PATCH 1/3] WM8750: Convert to new API

[PATCH 1/3] WM8750: Convert to new API

[Marek Vasut]

Register the WM8750 as a SPI or I2C device. This patch mostly shuffles code
around. Hugely inspired by WM8753 which was already converted.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 sound/soc/codecs/wm8750.c |  297 +++++++++++++++++++++------------------------
 1 files changed, 140 insertions(+), 157 deletions(-)

diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c
index 3e440c0..49411d1 100644
--- a/sound/soc/codecs/wm8750.c
+++ b/sound/soc/codecs/wm8750.c
@@ -30,11 +30,6 @@
 
 #include "wm8750.h"
 
-/* codec private data */
-struct wm8750_priv {
-	unsigned int sysclk;
-};
-
 /*
  * wm8750 register cache
  * We can't read the WM8750 register space when we
@@ -54,6 +49,13 @@ static const u16 wm8750_reg[] = {
 	0x0079, 0x0079, 0x0079,          /* 40 */
 };
 
+/* codec private data */
+struct wm8750_priv {
+	unsigned int sysclk;
+	struct snd_soc_codec codec;
+	u16 reg_cache[ARRAY_SIZE(wm8750_reg)];
+};
+
 #define wm8750_reset(c)	snd_soc_write(c, WM8750_RESET, 0)
 
 /*
@@ -696,25 +698,90 @@ static int wm8750_resume(struct platform_device *pdev)
 	return 0;
 }
 
+static struct snd_soc_codec *wm8750_codec;
+
+static int wm8750_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	if (!wm8750_codec) {
+		dev_err(&pdev->dev, "WM8750 codec not yet registered\n");
+		return -EINVAL;
+	}
+
+	socdev->card->codec = wm8750_codec;
+	codec = wm8750_codec;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		printk(KERN_ERR "wm8750: failed to create pcms\n");
+		goto err;
+	}
+
+	snd_soc_add_controls(codec, wm8750_snd_controls,
+				ARRAY_SIZE(wm8750_snd_controls));
+	wm8750_add_widgets(codec);
+
+	return 0;
+
+err:
+	return ret;
+}
+
+/* power down chip */
+static int wm8750_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8750 = {
+	.probe = 	wm8750_probe,
+	.remove = 	wm8750_remove,
+	.suspend = 	wm8750_suspend,
+	.resume =	wm8750_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8750);
+
 /*
  * initialise the WM8750 driver
  * register the mixer and dsp interfaces with the kernel
  */
-static int wm8750_init(struct snd_soc_device *socdev,
-		       enum snd_soc_control_type control)
+static int wm8750_register(struct wm8750_priv *wm8750,
+			enum snd_soc_control_type control)
 {
-	struct snd_soc_codec *codec = socdev->card->codec;
+	struct snd_soc_codec *codec = &wm8750->codec;
 	int reg, ret = 0;
 
+	if (wm8750_codec) {
+		dev_err(codec->dev, "Multiple WM8750 devices not supported\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
 	codec->name = "WM8750";
 	codec->owner = THIS_MODULE;
+	codec->bias_level = SND_SOC_BIAS_STANDBY;
 	codec->set_bias_level = wm8750_set_bias_level;
 	codec->dai = &wm8750_dai;
 	codec->num_dai = 1;
-	codec->reg_cache_size = ARRAY_SIZE(wm8750_reg);
-	codec->reg_cache = kmemdup(wm8750_reg, sizeof(wm8750_reg), GFP_KERNEL);
-	if (codec->reg_cache == NULL)
-		return -ENOMEM;
+	codec->private_data = wm8750;
+	codec->reg_cache_size = ARRAY_SIZE(wm8750->reg_cache) + 1;
+	codec->reg_cache = &wm8750->reg_cache;
+	codec->private_data = wm8750;
+
+	memcpy(codec->reg_cache, wm8750_reg, sizeof(wm8750->reg_cache));
 
 	ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
 	if (ret < 0) {
@@ -728,13 +795,6 @@ static int wm8750_init(struct snd_soc_device *socdev,
 		goto err;
 	}
 
-	/* register pcms */
-	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
-	if (ret < 0) {
-		printk(KERN_ERR "wm8750: failed to create pcms\n");
-		goto err;
-	}
-
 	/* charge output caps */
 	wm8750_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 
@@ -756,19 +816,37 @@ static int wm8750_init(struct snd_soc_device *socdev,
 	reg = snd_soc_read(codec, WM8750_RINVOL);
 	snd_soc_write(codec, WM8750_RINVOL, reg | 0x0100);
 
-	snd_soc_add_controls(codec, wm8750_snd_controls,
-				ARRAY_SIZE(wm8750_snd_controls));
-	wm8750_add_widgets(codec);
-	return ret;
+	wm8750_codec = codec;
+
+	ret = snd_soc_register_codec(codec);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		goto err;
+	}
 
+	ret = snd_soc_register_dais(&wm8750_dai, 1);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register DAIs: %d\n", ret);
+		goto err_codec;
+	}
+
+	return 0;
+
+err_codec:
+	snd_soc_unregister_codec(codec);
 err:
-	kfree(codec->reg_cache);
+	kfree(wm8750);
 	return ret;
 }
 
-/* If the i2c layer weren't so broken, we could pass this kind of data
-   around */
-static struct snd_soc_device *wm8750_socdev;
+static void wm8750_unregister(struct wm8750_priv *wm8750)
+{
+	wm8750_set_bias_level(&wm8750->codec, SND_SOC_BIAS_OFF);
+	snd_soc_unregister_dais(&wm8750_dai, 1);
+	snd_soc_unregister_codec(&wm8750->codec);
+	kfree(wm8750);
+	wm8750_codec = NULL;
+}
 
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 
@@ -782,24 +860,26 @@ static struct snd_soc_device *wm8750_socdev;
 static int wm8750_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
-	struct snd_soc_device *socdev = wm8750_socdev;
-	struct snd_soc_codec *codec = socdev->card->codec;
-	int ret;
+	struct snd_soc_codec *codec;
+	struct wm8750_priv *wm8750;
 
-	i2c_set_clientdata(i2c, codec);
-	codec->control_data = i2c;
+	wm8750 = kzalloc(sizeof(struct wm8750_priv), GFP_KERNEL);
+	if (wm8750 == NULL)
+		return -ENOMEM;
 
-	ret = wm8750_init(socdev, SND_SOC_I2C);
-	if (ret < 0)
-		pr_err("failed to initialise WM8750\n");
+        codec = &wm8750->codec;
+        codec->control_data = i2c;
+        i2c_set_clientdata(i2c, wm8750);
 
-	return ret;
+        codec->dev = &i2c->dev;
+
+	return wm8750_register(wm8750, SND_SOC_I2C);
 }
 
 static int wm8750_i2c_remove(struct i2c_client *client)
 {
-	struct snd_soc_codec *codec = i2c_get_clientdata(client);
-	kfree(codec->reg_cache);
+        struct wm8750_priv *wm8750 = i2c_get_clientdata(client);
+        wm8750_unregister(wm8750);
 	return 0;
 }
 
@@ -818,66 +898,31 @@ static struct i2c_driver wm8750_i2c_driver = {
 	.remove =   wm8750_i2c_remove,
 	.id_table = wm8750_i2c_id,
 };
-
-static int wm8750_add_i2c_device(struct platform_device *pdev,
-				 const struct wm8750_setup_data *setup)
-{
-	struct i2c_board_info info;
-	struct i2c_adapter *adapter;
-	struct i2c_client *client;
-	int ret;
-
-	ret = i2c_add_driver(&wm8750_i2c_driver);
-	if (ret != 0) {
-		dev_err(&pdev->dev, "can't add i2c driver\n");
-		return ret;
-	}
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	info.addr = setup->i2c_address;
-	strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
-
-	adapter = i2c_get_adapter(setup->i2c_bus);
-	if (!adapter) {
-		dev_err(&pdev->dev, "can't get i2c adapter %d\n",
-			setup->i2c_bus);
-		goto err_driver;
-	}
-
-	client = i2c_new_device(adapter, &info);
-	i2c_put_adapter(adapter);
-	if (!client) {
-		dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
-			(unsigned int)info.addr);
-		goto err_driver;
-	}
-
-	return 0;
-
-err_driver:
-	i2c_del_driver(&wm8750_i2c_driver);
-	return -ENODEV;
-}
 #endif
 
 #if defined(CONFIG_SPI_MASTER)
 static int __devinit wm8750_spi_probe(struct spi_device *spi)
 {
-	struct snd_soc_device *socdev = wm8750_socdev;
-	struct snd_soc_codec *codec = socdev->card->codec;
-	int ret;
+	struct snd_soc_codec *codec;
+	struct wm8750_priv *wm8750;
+
+	wm8750 = kzalloc(sizeof(struct wm8750_priv), GFP_KERNEL);
+	if (wm8750 == NULL)
+		return -ENOMEM;
 
+	codec = &wm8750->codec;
 	codec->control_data = spi;
+	codec->dev = &spi->dev;
 
-	ret = wm8750_init(socdev, SND_SOC_SPI);
-	if (ret < 0)
-		dev_err(&spi->dev, "failed to initialise WM8750\n");
+	dev_set_drvdata(&spi->dev, wm8750);
 
-	return ret;
+	return wm8750_register(wm8750, SND_SOC_SPI);
 }
 
 static int __devexit wm8750_spi_remove(struct spi_device *spi)
 {
+	struct wm8750_priv *wm8750 = dev_get_drvdata(&spi->dev);
+	wm8750_unregister(wm8750);
 	return 0;
 }
 
@@ -892,93 +937,31 @@ static struct spi_driver wm8750_spi_driver = {
 };
 #endif
 
-static int wm8750_probe(struct platform_device *pdev)
+static int __init wm8750_modinit(void)
 {
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct wm8750_setup_data *setup = socdev->codec_data;
-	struct snd_soc_codec *codec;
-	struct wm8750_priv *wm8750;
 	int ret;
-
-	codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
-	if (codec == NULL)
-		return -ENOMEM;
-
-	wm8750 = kzalloc(sizeof(struct wm8750_priv), GFP_KERNEL);
-	if (wm8750 == NULL) {
-		kfree(codec);
-		return -ENOMEM;
-	}
-
-	codec->private_data = wm8750;
-	socdev->card->codec = codec;
-	mutex_init(&codec->mutex);
-	INIT_LIST_HEAD(&codec->dapm_widgets);
-	INIT_LIST_HEAD(&codec->dapm_paths);
-	wm8750_socdev = socdev;
-
-	ret = -ENODEV;
-
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-	if (setup->i2c_address) {
-		ret = wm8750_add_i2c_device(pdev, setup);
-	}
+	ret = i2c_add_driver(&wm8750_i2c_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM8750 I2C driver: %d\n", ret);
 #endif
 #if defined(CONFIG_SPI_MASTER)
-	if (setup->spi) {
-		ret = spi_register_driver(&wm8750_spi_driver);
-		if (ret != 0)
-			printk(KERN_ERR "can't add spi driver");
-	}
+	ret = spi_register_driver(&wm8750_spi_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM8750 SPI driver: %d\n", ret);
 #endif
-
-	if (ret != 0) {
-		kfree(codec->private_data);
-		kfree(codec);
-	}
-	return ret;
+	return 0;
 }
+module_init(wm8750_modinit);
 
-/* power down chip */
-static int wm8750_remove(struct platform_device *pdev)
+static void __exit wm8750_exit(void)
 {
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct snd_soc_codec *codec = socdev->card->codec;
-
-	if (codec->control_data)
-		wm8750_set_bias_level(codec, SND_SOC_BIAS_OFF);
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-	i2c_unregister_device(codec->control_data);
 	i2c_del_driver(&wm8750_i2c_driver);
 #endif
 #if defined(CONFIG_SPI_MASTER)
 	spi_unregister_driver(&wm8750_spi_driver);
 #endif
-	kfree(codec->private_data);
-	kfree(codec);
-
-	return 0;
-}
-
-struct snd_soc_codec_device soc_codec_dev_wm8750 = {
-	.probe = 	wm8750_probe,
-	.remove = 	wm8750_remove,
-	.suspend = 	wm8750_suspend,
-	.resume =	wm8750_resume,
-};
-EXPORT_SYMBOL_GPL(soc_codec_dev_wm8750);
-
-static int __init wm8750_modinit(void)
-{
-	return snd_soc_register_dai(&wm8750_dai);
-}
-module_init(wm8750_modinit);
-
-static void __exit wm8750_exit(void)
-{
-	snd_soc_unregister_dai(&wm8750_dai);
 }
 module_exit(wm8750_exit);
 
-- 
1.7.0

[PATCH 2/3] WM8750: Fix SPITZ machine

[Marek Vasut]

This patch registers the WM8750 codec on a proper place on the SPITZ machine
after the WM8750 driver was converted to new API. Moreover, the incorrect code
is hereby removed from the aSoC driver.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/spitz.c |    4 ++++
 sound/soc/pxa/spitz.c     |    7 -------
 2 files changed, 4 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 19b5109..58eb5e1 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -817,6 +817,10 @@ static struct i2c_board_info akita_i2c_board_info[] = {
 		.addr		= 0x18,
 		.platform_data	= &akita_ioexp,
 	},
+	{
+		.type		= "wm8750",
+		.addr		= 0x1b,
+	},
 };
 
 static void __init akita_init(void)
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index c4cd2ac..d256f5f 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -322,17 +322,10 @@ static struct snd_soc_card snd_soc_spitz = {
 	.num_links = 1,
 };
 
-/* spitz audio private data */
-static struct wm8750_setup_data spitz_wm8750_setup = {
-	.i2c_bus = 0,
-	.i2c_address = 0x1b,
-};
-
 /* spitz audio subsystem */
 static struct snd_soc_device spitz_snd_devdata = {
 	.card = &snd_soc_spitz,
 	.codec_dev = &soc_codec_dev_wm8750,
-	.codec_data = &spitz_wm8750_setup,
 };
 
 static struct platform_device *spitz_snd_device;
-- 
1.7.0

[PATCH 3/3] Zipit Z2 WM8750 aSoC driver

[Marek Vasut]

This patch adds support for sound through the WM8750 codec on Zipit Z2.
Also, this patch incorporates support for detecting headset jack
insertion through the jack detection API.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 sound/soc/pxa/Kconfig  |    8 ++
 sound/soc/pxa/Makefile |    2 +
 sound/soc/pxa/z2.c     |  246 ++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 256 insertions(+), 0 deletions(-)
 create mode 100644 sound/soc/pxa/z2.c

diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index 376e14a..495a36f 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -42,6 +42,14 @@ config SND_PXA2XX_SOC_SPITZ
 	  Say Y if you want to add support for SoC audio on Sharp
 	  Zaurus SL-Cxx00 models (Spitz, Borzoi and Akita).
 
+config SND_PXA2XX_SOC_Z2
+	tristate "SoC Audio support for Zipit Z2"
+	depends on SND_PXA2XX_SOC && MACH_ZIPIT2
+	select SND_PXA2XX_SOC_I2S
+	select SND_SOC_WM8750
+	help
+	  Say Y if you want to add support for SoC audio on Zipit Z2.
+
 config SND_PXA2XX_SOC_POODLE
 	tristate "SoC Audio support for Poodle"
 	depends on SND_PXA2XX_SOC && MACH_POODLE
diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile
index f3e08fd..caa03d8 100644
--- a/sound/soc/pxa/Makefile
+++ b/sound/soc/pxa/Makefile
@@ -22,6 +22,7 @@ snd-soc-palm27x-objs := palm27x.o
 snd-soc-zylonite-objs := zylonite.o
 snd-soc-magician-objs := magician.o
 snd-soc-mioa701-objs := mioa701_wm9713.o
+snd-soc-z2-objs := z2.o
 snd-soc-imote2-objs := imote2.o
 snd-soc-raumfeld-objs := raumfeld.o
 
@@ -36,6 +37,7 @@ obj-$(CONFIG_SND_PXA2XX_SOC_EM_X270) += snd-soc-em-x270.o
 obj-$(CONFIG_SND_PXA2XX_SOC_PALM27X) += snd-soc-palm27x.o
 obj-$(CONFIG_SND_PXA2XX_SOC_MAGICIAN) += snd-soc-magician.o
 obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o
+obj-$(CONFIG_SND_PXA2XX_SOC_Z2) += snd-soc-z2.o
 obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o
 obj-$(CONFIG_SND_PXA2XX_SOC_IMOTE2) += snd-soc-imote2.o
 obj-$(CONFIG_SND_SOC_RAUMFELD) += snd-soc-raumfeld.o
diff --git a/sound/soc/pxa/z2.c b/sound/soc/pxa/z2.c
new file mode 100644
index 0000000..c78c271
--- /dev/null
+++ b/sound/soc/pxa/z2.c
@@ -0,0 +1,246 @@
+/*
+ * linux/sound/soc/pxa/z2.c
+ *
+ * SoC Audio driver for Aeronix Zipit Z2
+ *
+ * Copyright (C) 2009 Ken McGuire <kenm@desertweyr.com>
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/jack.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
+#include <mach/z2.h>
+
+#include "../codecs/wm8750.h"
+#include "pxa2xx-pcm.h"
+#include "pxa2xx-i2s.h"
+
+static struct snd_soc_card snd_soc_z2;
+
+static int z2_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	unsigned int clk = 0;
+	int ret = 0;
+
+	switch (params_rate(params)) {
+	case 8000:
+	case 16000:
+	case 48000:
+	case 96000:
+		clk = 12288000;
+		break;
+	case 11025:
+	case 22050:
+	case 44100:
+		clk = 11289600;
+		break;
+	}
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
+		SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* set the I2S system clock as input (unused) */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, PXA2XX_I2S_SYSCLK, 0,
+		SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct snd_soc_jack hs_jack;
+
+/* Headset jack detection DAPM pins */
+static struct snd_soc_jack_pin hs_jack_pins[] = {
+	{
+		.pin	= "Mic Jack",
+		.mask	= SND_JACK_MICROPHONE,
+	},
+	{
+		.pin	= "Headphone Jack",
+		.mask	= SND_JACK_HEADPHONE,
+	},
+};
+
+/* Headset jack detection gpios */
+static struct snd_soc_jack_gpio hs_jack_gpios[] = {
+	{
+		.gpio		= GPIO37_ZIPITZ2_HEADSET_DETECT,
+		.name		= "hsdet-gpio",
+		.report		= SND_JACK_HEADSET,
+		.debounce_time	= 200,
+	},
+};
+
+/* z2 machine dapm widgets */
+static const struct snd_soc_dapm_widget wm8750_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_MIC("Mic Jack", NULL),
+	SND_SOC_DAPM_SPK("Ext Spk", NULL),
+
+	/* headset is a mic and mono headphone */
+	SND_SOC_DAPM_HP("Headset Jack", NULL),
+};
+
+/* Z2 machine audio_map */
+static const struct snd_soc_dapm_route audio_map[] = {
+
+	/* headphone connected to LOUT1, ROUT1 */
+	{"Headphone Jack", NULL, "LOUT1"},
+	{"Headphone Jack", NULL, "ROUT1"},
+
+	/* ext speaker connected to LOUT2, ROUT2  */
+	{"Ext Spk", NULL , "ROUT2"},
+	{"Ext Spk", NULL , "LOUT2"},
+
+	/* mic is connected to R input 2 - with bias */
+	{"RINPUT2", NULL, "Mic Bias"},
+	{"Mic Bias", NULL, "Mic Jack"},
+};
+
+/*
+ * Logic for a wm8750 as connected on a Z2 Device
+ */
+static int z2_wm8750_init(struct snd_soc_codec *codec)
+{
+	int ret;
+
+	/* NC codec pins */
+	snd_soc_dapm_disable_pin(codec, "LINPUT3");
+	snd_soc_dapm_disable_pin(codec, "RINPUT3");
+	snd_soc_dapm_disable_pin(codec, "OUT3");
+	snd_soc_dapm_disable_pin(codec, "MONO");
+
+	/* Add z2 specific widgets */
+	snd_soc_dapm_new_controls(codec, wm8750_dapm_widgets,
+				 ARRAY_SIZE(wm8750_dapm_widgets));
+
+	/* Set up z2 specific audio paths */
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+	ret = snd_soc_dapm_sync(codec);
+	if (ret)
+		goto err;
+
+	/* Jack detection API stuff */
+	ret = snd_soc_jack_new(&snd_soc_z2, "Headset Jack", SND_JACK_HEADSET,
+				&hs_jack);
+	if (ret)
+		goto err;
+
+	ret = snd_soc_jack_add_pins(&hs_jack, ARRAY_SIZE(hs_jack_pins),
+				hs_jack_pins);
+	if (ret)
+		goto err;
+
+	ret = snd_soc_jack_add_gpios(&hs_jack, ARRAY_SIZE(hs_jack_gpios),
+				hs_jack_gpios);
+	if (ret)
+		goto err;
+
+	return 0;
+
+err:
+	return ret;
+}
+
+static struct snd_soc_ops z2_ops = {
+	.hw_params = z2_hw_params,
+};
+
+/* z2 digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link z2_dai = {
+	.name		= "wm8750",
+	.stream_name	= "WM8750",
+	.cpu_dai	= &pxa_i2s_dai,
+	.codec_dai	= &wm8750_dai,
+	.init		= z2_wm8750_init,
+	.ops		= &z2_ops,
+};
+
+/* z2 audio machine driver */
+static struct snd_soc_card snd_soc_z2 = {
+	.name		= "Z2",
+	.platform	= &pxa2xx_soc_platform,
+	.dai_link	= &z2_dai,
+	.num_links	= 1,
+};
+
+/* z2 audio subsystem */
+static struct snd_soc_device z2_snd_devdata = {
+	.card		= &snd_soc_z2,
+	.codec_dev	= &soc_codec_dev_wm8750,
+};
+
+static struct platform_device *z2_snd_device;
+
+static int __init z2_init(void)
+{
+	int ret;
+
+	if (!machine_is_zipit2())
+		return -ENODEV;
+
+	z2_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!z2_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(z2_snd_device, &z2_snd_devdata);
+	z2_snd_devdata.dev = &z2_snd_device->dev;
+	ret = platform_device_add(z2_snd_device);
+
+	if (ret)
+		platform_device_put(z2_snd_device);
+
+	return ret;
+}
+
+static void __exit z2_exit(void)
+{
+	platform_device_unregister(z2_snd_device);
+}
+
+module_init(z2_init);
+module_exit(z2_exit);
+
+MODULE_AUTHOR(	"Ken McGuire <kenm@desertweyr.com>, "
+		"Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("ALSA SoC ZipitZ2");
+MODULE_LICENSE("GPL");
-- 
1.7.0

Re: [PATCH 1/3] WM8750: Convert to new API

[Marek Vasut]

Dne Po 5. dubna 2010 06:00:03 Marek Vasut napsal(a):
> Register the WM8750 as a SPI or I2C device. This patch mostly shuffles code
> around. Hugely inspired by WM8753 which was already converted.
> 
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Sorry, I'll send this one more time. I'll roll checkpatch fixes into this patch 
(as the lines checkpatch marked were moved anyway).

[PATCH 1/3] WM8750: Convert to new API

[Marek Vasut]

Register the WM8750 as a SPI or I2C device. This patch mostly shuffles code
around. Hugely inspired by WM8753 which was already converted.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 sound/soc/codecs/wm8750.c |  295 +++++++++++++++++++++------------------------
 1 files changed, 139 insertions(+), 156 deletions(-)

diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c
index 3e440c0..eea7ba6 100644
--- a/sound/soc/codecs/wm8750.c
+++ b/sound/soc/codecs/wm8750.c
@@ -30,11 +30,6 @@
 
 #include "wm8750.h"
 
-/* codec private data */
-struct wm8750_priv {
-	unsigned int sysclk;
-};
-
 /*
  * wm8750 register cache
  * We can't read the WM8750 register space when we
@@ -54,6 +49,13 @@ static const u16 wm8750_reg[] = {
 	0x0079, 0x0079, 0x0079,          /* 40 */
 };
 
+/* codec private data */
+struct wm8750_priv {
+	unsigned int sysclk;
+	struct snd_soc_codec codec;
+	u16 reg_cache[ARRAY_SIZE(wm8750_reg)];
+};
+
 #define wm8750_reset(c)	snd_soc_write(c, WM8750_RESET, 0)
 
 /*
@@ -696,25 +698,90 @@ static int wm8750_resume(struct platform_device *pdev)
 	return 0;
 }
 
+static struct snd_soc_codec *wm8750_codec;
+
+static int wm8750_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	if (!wm8750_codec) {
+		dev_err(&pdev->dev, "WM8750 codec not yet registered\n");
+		return -EINVAL;
+	}
+
+	socdev->card->codec = wm8750_codec;
+	codec = wm8750_codec;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		printk(KERN_ERR "wm8750: failed to create pcms\n");
+		goto err;
+	}
+
+	snd_soc_add_controls(codec, wm8750_snd_controls,
+				ARRAY_SIZE(wm8750_snd_controls));
+	wm8750_add_widgets(codec);
+
+	return 0;
+
+err:
+	return ret;
+}
+
+/* power down chip */
+static int wm8750_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8750 = {
+	.probe		= wm8750_probe,
+	.remove		= wm8750_remove,
+	.suspend	= wm8750_suspend,
+	.resume		= wm8750_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8750);
+
 /*
  * initialise the WM8750 driver
  * register the mixer and dsp interfaces with the kernel
  */
-static int wm8750_init(struct snd_soc_device *socdev,
-		       enum snd_soc_control_type control)
+static int wm8750_register(struct wm8750_priv *wm8750,
+			enum snd_soc_control_type control)
 {
-	struct snd_soc_codec *codec = socdev->card->codec;
+	struct snd_soc_codec *codec = &wm8750->codec;
 	int reg, ret = 0;
 
+	if (wm8750_codec) {
+		dev_err(codec->dev, "Multiple WM8750 devices not supported\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
 	codec->name = "WM8750";
 	codec->owner = THIS_MODULE;
+	codec->bias_level = SND_SOC_BIAS_STANDBY;
 	codec->set_bias_level = wm8750_set_bias_level;
 	codec->dai = &wm8750_dai;
 	codec->num_dai = 1;
-	codec->reg_cache_size = ARRAY_SIZE(wm8750_reg);
-	codec->reg_cache = kmemdup(wm8750_reg, sizeof(wm8750_reg), GFP_KERNEL);
-	if (codec->reg_cache == NULL)
-		return -ENOMEM;
+	codec->private_data = wm8750;
+	codec->reg_cache_size = ARRAY_SIZE(wm8750->reg_cache) + 1;
+	codec->reg_cache = &wm8750->reg_cache;
+	codec->private_data = wm8750;
+
+	memcpy(codec->reg_cache, wm8750_reg, sizeof(wm8750->reg_cache));
 
 	ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
 	if (ret < 0) {
@@ -728,13 +795,6 @@ static int wm8750_init(struct snd_soc_device *socdev,
 		goto err;
 	}
 
-	/* register pcms */
-	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
-	if (ret < 0) {
-		printk(KERN_ERR "wm8750: failed to create pcms\n");
-		goto err;
-	}
-
 	/* charge output caps */
 	wm8750_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 
@@ -756,19 +816,37 @@ static int wm8750_init(struct snd_soc_device *socdev,
 	reg = snd_soc_read(codec, WM8750_RINVOL);
 	snd_soc_write(codec, WM8750_RINVOL, reg | 0x0100);
 
-	snd_soc_add_controls(codec, wm8750_snd_controls,
-				ARRAY_SIZE(wm8750_snd_controls));
-	wm8750_add_widgets(codec);
-	return ret;
+	wm8750_codec = codec;
 
+	ret = snd_soc_register_codec(codec);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		goto err;
+	}
+
+	ret = snd_soc_register_dais(&wm8750_dai, 1);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register DAIs: %d\n", ret);
+		goto err_codec;
+	}
+
+	return 0;
+
+err_codec:
+	snd_soc_unregister_codec(codec);
 err:
-	kfree(codec->reg_cache);
+	kfree(wm8750);
 	return ret;
 }
 
-/* If the i2c layer weren't so broken, we could pass this kind of data
-   around */
-static struct snd_soc_device *wm8750_socdev;
+static void wm8750_unregister(struct wm8750_priv *wm8750)
+{
+	wm8750_set_bias_level(&wm8750->codec, SND_SOC_BIAS_OFF);
+	snd_soc_unregister_dais(&wm8750_dai, 1);
+	snd_soc_unregister_codec(&wm8750->codec);
+	kfree(wm8750);
+	wm8750_codec = NULL;
+}
 
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 
@@ -782,24 +860,26 @@ static struct snd_soc_device *wm8750_socdev;
 static int wm8750_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
-	struct snd_soc_device *socdev = wm8750_socdev;
-	struct snd_soc_codec *codec = socdev->card->codec;
-	int ret;
+	struct snd_soc_codec *codec;
+	struct wm8750_priv *wm8750;
 
-	i2c_set_clientdata(i2c, codec);
+	wm8750 = kzalloc(sizeof(struct wm8750_priv), GFP_KERNEL);
+	if (wm8750 == NULL)
+		return -ENOMEM;
+
+	codec = &wm8750->codec;
 	codec->control_data = i2c;
+	i2c_set_clientdata(i2c, wm8750);
 
-	ret = wm8750_init(socdev, SND_SOC_I2C);
-	if (ret < 0)
-		pr_err("failed to initialise WM8750\n");
+	codec->dev = &i2c->dev;
 
-	return ret;
+	return wm8750_register(wm8750, SND_SOC_I2C);
 }
 
 static int wm8750_i2c_remove(struct i2c_client *client)
 {
-	struct snd_soc_codec *codec = i2c_get_clientdata(client);
-	kfree(codec->reg_cache);
+	struct wm8750_priv *wm8750 = i2c_get_clientdata(client);
+	wm8750_unregister(wm8750);
 	return 0;
 }
 
@@ -818,66 +898,31 @@ static struct i2c_driver wm8750_i2c_driver = {
 	.remove =   wm8750_i2c_remove,
 	.id_table = wm8750_i2c_id,
 };
-
-static int wm8750_add_i2c_device(struct platform_device *pdev,
-				 const struct wm8750_setup_data *setup)
-{
-	struct i2c_board_info info;
-	struct i2c_adapter *adapter;
-	struct i2c_client *client;
-	int ret;
-
-	ret = i2c_add_driver(&wm8750_i2c_driver);
-	if (ret != 0) {
-		dev_err(&pdev->dev, "can't add i2c driver\n");
-		return ret;
-	}
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	info.addr = setup->i2c_address;
-	strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
-
-	adapter = i2c_get_adapter(setup->i2c_bus);
-	if (!adapter) {
-		dev_err(&pdev->dev, "can't get i2c adapter %d\n",
-			setup->i2c_bus);
-		goto err_driver;
-	}
-
-	client = i2c_new_device(adapter, &info);
-	i2c_put_adapter(adapter);
-	if (!client) {
-		dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
-			(unsigned int)info.addr);
-		goto err_driver;
-	}
-
-	return 0;
-
-err_driver:
-	i2c_del_driver(&wm8750_i2c_driver);
-	return -ENODEV;
-}
 #endif
 
 #if defined(CONFIG_SPI_MASTER)
 static int __devinit wm8750_spi_probe(struct spi_device *spi)
 {
-	struct snd_soc_device *socdev = wm8750_socdev;
-	struct snd_soc_codec *codec = socdev->card->codec;
-	int ret;
+	struct snd_soc_codec *codec;
+	struct wm8750_priv *wm8750;
 
+	wm8750 = kzalloc(sizeof(struct wm8750_priv), GFP_KERNEL);
+	if (wm8750 == NULL)
+		return -ENOMEM;
+
+	codec = &wm8750->codec;
 	codec->control_data = spi;
+	codec->dev = &spi->dev;
 
-	ret = wm8750_init(socdev, SND_SOC_SPI);
-	if (ret < 0)
-		dev_err(&spi->dev, "failed to initialise WM8750\n");
+	dev_set_drvdata(&spi->dev, wm8750);
 
-	return ret;
+	return wm8750_register(wm8750, SND_SOC_SPI);
 }
 
 static int __devexit wm8750_spi_remove(struct spi_device *spi)
 {
+	struct wm8750_priv *wm8750 = dev_get_drvdata(&spi->dev);
+	wm8750_unregister(wm8750);
 	return 0;
 }
 
@@ -892,93 +937,31 @@ static struct spi_driver wm8750_spi_driver = {
 };
 #endif
 
-static int wm8750_probe(struct platform_device *pdev)
+static int __init wm8750_modinit(void)
 {
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct wm8750_setup_data *setup = socdev->codec_data;
-	struct snd_soc_codec *codec;
-	struct wm8750_priv *wm8750;
 	int ret;
-
-	codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
-	if (codec == NULL)
-		return -ENOMEM;
-
-	wm8750 = kzalloc(sizeof(struct wm8750_priv), GFP_KERNEL);
-	if (wm8750 == NULL) {
-		kfree(codec);
-		return -ENOMEM;
-	}
-
-	codec->private_data = wm8750;
-	socdev->card->codec = codec;
-	mutex_init(&codec->mutex);
-	INIT_LIST_HEAD(&codec->dapm_widgets);
-	INIT_LIST_HEAD(&codec->dapm_paths);
-	wm8750_socdev = socdev;
-
-	ret = -ENODEV;
-
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-	if (setup->i2c_address) {
-		ret = wm8750_add_i2c_device(pdev, setup);
-	}
+	ret = i2c_add_driver(&wm8750_i2c_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM8750 I2C driver: %d\n", ret);
 #endif
 #if defined(CONFIG_SPI_MASTER)
-	if (setup->spi) {
-		ret = spi_register_driver(&wm8750_spi_driver);
-		if (ret != 0)
-			printk(KERN_ERR "can't add spi driver");
-	}
+	ret = spi_register_driver(&wm8750_spi_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM8750 SPI driver: %d\n", ret);
 #endif
-
-	if (ret != 0) {
-		kfree(codec->private_data);
-		kfree(codec);
-	}
-	return ret;
+	return 0;
 }
+module_init(wm8750_modinit);
 
-/* power down chip */
-static int wm8750_remove(struct platform_device *pdev)
+static void __exit wm8750_exit(void)
 {
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct snd_soc_codec *codec = socdev->card->codec;
-
-	if (codec->control_data)
-		wm8750_set_bias_level(codec, SND_SOC_BIAS_OFF);
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-	i2c_unregister_device(codec->control_data);
 	i2c_del_driver(&wm8750_i2c_driver);
 #endif
 #if defined(CONFIG_SPI_MASTER)
 	spi_unregister_driver(&wm8750_spi_driver);
 #endif
-	kfree(codec->private_data);
-	kfree(codec);
-
-	return 0;
-}
-
-struct snd_soc_codec_device soc_codec_dev_wm8750 = {
-	.probe = 	wm8750_probe,
-	.remove = 	wm8750_remove,
-	.suspend = 	wm8750_suspend,
-	.resume =	wm8750_resume,
-};
-EXPORT_SYMBOL_GPL(soc_codec_dev_wm8750);
-
-static int __init wm8750_modinit(void)
-{
-	return snd_soc_register_dai(&wm8750_dai);
-}
-module_init(wm8750_modinit);
-
-static void __exit wm8750_exit(void)
-{
-	snd_soc_unregister_dai(&wm8750_dai);
 }
 module_exit(wm8750_exit);
 
-- 
1.7.0

[PATCH 2/3] WM8750: Fix SPITZ machine

[Marek Vasut]

This patch registers the WM8750 codec on a proper place on the SPITZ machine
after the WM8750 driver was converted to new API. Moreover, the incorrect code
is hereby removed from the aSoC driver.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/spitz.c |    4 ++++
 sound/soc/pxa/spitz.c     |    7 -------
 2 files changed, 4 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 19b5109..58eb5e1 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -817,6 +817,10 @@ static struct i2c_board_info akita_i2c_board_info[] = {
 		.addr		= 0x18,
 		.platform_data	= &akita_ioexp,
 	},
+	{
+		.type		= "wm8750",
+		.addr		= 0x1b,
+	},
 };
 
 static void __init akita_init(void)
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index c4cd2ac..d256f5f 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -322,17 +322,10 @@ static struct snd_soc_card snd_soc_spitz = {
 	.num_links = 1,
 };
 
-/* spitz audio private data */
-static struct wm8750_setup_data spitz_wm8750_setup = {
-	.i2c_bus = 0,
-	.i2c_address = 0x1b,
-};
-
 /* spitz audio subsystem */
 static struct snd_soc_device spitz_snd_devdata = {
 	.card = &snd_soc_spitz,
 	.codec_dev = &soc_codec_dev_wm8750,
-	.codec_data = &spitz_wm8750_setup,
 };
 
 static struct platform_device *spitz_snd_device;
-- 
1.7.0

[PATCH 3/3] Zipit Z2 WM8750 aSoC driver

[Marek Vasut]

This patch adds support for sound through the WM8750 codec on Zipit Z2.
Also, this patch incorporates support for detecting headset jack
insertion through the jack detection API.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 sound/soc/pxa/Kconfig  |    8 ++
 sound/soc/pxa/Makefile |    2 +
 sound/soc/pxa/z2.c     |  246 ++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 256 insertions(+), 0 deletions(-)
 create mode 100644 sound/soc/pxa/z2.c

diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index 376e14a..495a36f 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -42,6 +42,14 @@ config SND_PXA2XX_SOC_SPITZ
 	  Say Y if you want to add support for SoC audio on Sharp
 	  Zaurus SL-Cxx00 models (Spitz, Borzoi and Akita).
 
+config SND_PXA2XX_SOC_Z2
+	tristate "SoC Audio support for Zipit Z2"
+	depends on SND_PXA2XX_SOC && MACH_ZIPIT2
+	select SND_PXA2XX_SOC_I2S
+	select SND_SOC_WM8750
+	help
+	  Say Y if you want to add support for SoC audio on Zipit Z2.
+
 config SND_PXA2XX_SOC_POODLE
 	tristate "SoC Audio support for Poodle"
 	depends on SND_PXA2XX_SOC && MACH_POODLE
diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile
index f3e08fd..caa03d8 100644
--- a/sound/soc/pxa/Makefile
+++ b/sound/soc/pxa/Makefile
@@ -22,6 +22,7 @@ snd-soc-palm27x-objs := palm27x.o
 snd-soc-zylonite-objs := zylonite.o
 snd-soc-magician-objs := magician.o
 snd-soc-mioa701-objs := mioa701_wm9713.o
+snd-soc-z2-objs := z2.o
 snd-soc-imote2-objs := imote2.o
 snd-soc-raumfeld-objs := raumfeld.o
 
@@ -36,6 +37,7 @@ obj-$(CONFIG_SND_PXA2XX_SOC_EM_X270) += snd-soc-em-x270.o
 obj-$(CONFIG_SND_PXA2XX_SOC_PALM27X) += snd-soc-palm27x.o
 obj-$(CONFIG_SND_PXA2XX_SOC_MAGICIAN) += snd-soc-magician.o
 obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o
+obj-$(CONFIG_SND_PXA2XX_SOC_Z2) += snd-soc-z2.o
 obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o
 obj-$(CONFIG_SND_PXA2XX_SOC_IMOTE2) += snd-soc-imote2.o
 obj-$(CONFIG_SND_SOC_RAUMFELD) += snd-soc-raumfeld.o
diff --git a/sound/soc/pxa/z2.c b/sound/soc/pxa/z2.c
new file mode 100644
index 0000000..4e4d2fa
--- /dev/null
+++ b/sound/soc/pxa/z2.c
@@ -0,0 +1,246 @@
+/*
+ * linux/sound/soc/pxa/z2.c
+ *
+ * SoC Audio driver for Aeronix Zipit Z2
+ *
+ * Copyright (C) 2009 Ken McGuire <kenm@desertweyr.com>
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/jack.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
+#include <mach/z2.h>
+
+#include "../codecs/wm8750.h"
+#include "pxa2xx-pcm.h"
+#include "pxa2xx-i2s.h"
+
+static struct snd_soc_card snd_soc_z2;
+
+static int z2_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	unsigned int clk = 0;
+	int ret = 0;
+
+	switch (params_rate(params)) {
+	case 8000:
+	case 16000:
+	case 48000:
+	case 96000:
+		clk = 12288000;
+		break;
+	case 11025:
+	case 22050:
+	case 44100:
+		clk = 11289600;
+		break;
+	}
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
+		SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* set the I2S system clock as input (unused) */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, PXA2XX_I2S_SYSCLK, 0,
+		SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct snd_soc_jack hs_jack;
+
+/* Headset jack detection DAPM pins */
+static struct snd_soc_jack_pin hs_jack_pins[] = {
+	{
+		.pin	= "Mic Jack",
+		.mask	= SND_JACK_MICROPHONE,
+	},
+	{
+		.pin	= "Headphone Jack",
+		.mask	= SND_JACK_HEADPHONE,
+	},
+};
+
+/* Headset jack detection gpios */
+static struct snd_soc_jack_gpio hs_jack_gpios[] = {
+	{
+		.gpio		= GPIO37_ZIPITZ2_HEADSET_DETECT,
+		.name		= "hsdet-gpio",
+		.report		= SND_JACK_HEADSET,
+		.debounce_time	= 200,
+	},
+};
+
+/* z2 machine dapm widgets */
+static const struct snd_soc_dapm_widget wm8750_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_MIC("Mic Jack", NULL),
+	SND_SOC_DAPM_SPK("Ext Spk", NULL),
+
+	/* headset is a mic and mono headphone */
+	SND_SOC_DAPM_HP("Headset Jack", NULL),
+};
+
+/* Z2 machine audio_map */
+static const struct snd_soc_dapm_route audio_map[] = {
+
+	/* headphone connected to LOUT1, ROUT1 */
+	{"Headphone Jack", NULL, "LOUT1"},
+	{"Headphone Jack", NULL, "ROUT1"},
+
+	/* ext speaker connected to LOUT2, ROUT2  */
+	{"Ext Spk", NULL , "ROUT2"},
+	{"Ext Spk", NULL , "LOUT2"},
+
+	/* mic is connected to R input 2 - with bias */
+	{"RINPUT2", NULL, "Mic Bias"},
+	{"Mic Bias", NULL, "Mic Jack"},
+};
+
+/*
+ * Logic for a wm8750 as connected on a Z2 Device
+ */
+static int z2_wm8750_init(struct snd_soc_codec *codec)
+{
+	int ret;
+
+	/* NC codec pins */
+	snd_soc_dapm_disable_pin(codec, "LINPUT3");
+	snd_soc_dapm_disable_pin(codec, "RINPUT3");
+	snd_soc_dapm_disable_pin(codec, "OUT3");
+	snd_soc_dapm_disable_pin(codec, "MONO");
+
+	/* Add z2 specific widgets */
+	snd_soc_dapm_new_controls(codec, wm8750_dapm_widgets,
+				 ARRAY_SIZE(wm8750_dapm_widgets));
+
+	/* Set up z2 specific audio paths */
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+	ret = snd_soc_dapm_sync(codec);
+	if (ret)
+		goto err;
+
+	/* Jack detection API stuff */
+	ret = snd_soc_jack_new(&snd_soc_z2, "Headset Jack", SND_JACK_HEADSET,
+				&hs_jack);
+	if (ret)
+		goto err;
+
+	ret = snd_soc_jack_add_pins(&hs_jack, ARRAY_SIZE(hs_jack_pins),
+				hs_jack_pins);
+	if (ret)
+		goto err;
+
+	ret = snd_soc_jack_add_gpios(&hs_jack, ARRAY_SIZE(hs_jack_gpios),
+				hs_jack_gpios);
+	if (ret)
+		goto err;
+
+	return 0;
+
+err:
+	return ret;
+}
+
+static struct snd_soc_ops z2_ops = {
+	.hw_params = z2_hw_params,
+};
+
+/* z2 digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link z2_dai = {
+	.name		= "wm8750",
+	.stream_name	= "WM8750",
+	.cpu_dai	= &pxa_i2s_dai,
+	.codec_dai	= &wm8750_dai,
+	.init		= z2_wm8750_init,
+	.ops		= &z2_ops,
+};
+
+/* z2 audio machine driver */
+static struct snd_soc_card snd_soc_z2 = {
+	.name		= "Z2",
+	.platform	= &pxa2xx_soc_platform,
+	.dai_link	= &z2_dai,
+	.num_links	= 1,
+};
+
+/* z2 audio subsystem */
+static struct snd_soc_device z2_snd_devdata = {
+	.card		= &snd_soc_z2,
+	.codec_dev	= &soc_codec_dev_wm8750,
+};
+
+static struct platform_device *z2_snd_device;
+
+static int __init z2_init(void)
+{
+	int ret;
+
+	if (!machine_is_zipit2())
+		return -ENODEV;
+
+	z2_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!z2_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(z2_snd_device, &z2_snd_devdata);
+	z2_snd_devdata.dev = &z2_snd_device->dev;
+	ret = platform_device_add(z2_snd_device);
+
+	if (ret)
+		platform_device_put(z2_snd_device);
+
+	return ret;
+}
+
+static void __exit z2_exit(void)
+{
+	platform_device_unregister(z2_snd_device);
+}
+
+module_init(z2_init);
+module_exit(z2_exit);
+
+MODULE_AUTHOR("Ken McGuire <kenm@desertweyr.com>, "
+		"Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("ALSA SoC ZipitZ2");
+MODULE_LICENSE("GPL");
-- 
1.7.0

Re: [PATCH 2/3] WM8750: Fix SPITZ machine

[Mark Brown]

On Mon, Apr 05, 2010 at 06:13:37AM +0200, Marek Vasut wrote:
> This patch registers the WM8750 codec on a proper place on the SPITZ machine
> after the WM8750 driver was converted to new API. Moreover, the incorrect code

We also need this for the Jive machine.  FWIW I'm checking for affected
machines by doing 'grep -l wm8750 sound/soc/*/*.c'.

> is hereby removed from the aSoC driver.

ASoC.

> diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
> index c4cd2ac..d256f5f 100644
> --- a/sound/soc/pxa/spitz.c
> +++ b/sound/soc/pxa/spitz.c
> @@ -322,17 +322,10 @@ static struct snd_soc_card snd_soc_spitz = {
>  	.num_links = 1,
>  };
>  
> -/* spitz audio private data */
> -static struct wm8750_setup_data spitz_wm8750_setup = {
> -	.i2c_bus = 0,
> -	.i2c_address = 0x1b,
> -};
> -
>  /* spitz audio subsystem */
>  static struct snd_soc_device spitz_snd_devdata = {
>  	.card = &snd_soc_spitz,
>  	.codec_dev = &soc_codec_dev_wm8750,
> -	.codec_data = &spitz_wm8750_setup,
>  };

So, this is going to break spitz if not merged in with the patch to
update wm8750 since prior to the conversion of the driver the setup data
is required while after the conversion the setup data structure no
longer exists and will therefore cause compile failures.

As I've mentioned several times before I urge you to look at how this
transition was done for wm8731 for an example of how this sort of change
can be done without too much disruption.

Re: [PATCH 3/3] Zipit Z2 WM8750 aSoC driver

[Mark Brown]

On Mon, Apr 05, 2010 at 06:13:38AM +0200, Marek Vasut wrote:
> This patch adds support for sound through the WM8750 codec on Zipit Z2.
> Also, this patch incorporates support for detecting headset jack
> insertion through the jack detection API.
> 
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

This all looks good.

Re: [PATCH 1/3] WM8750: Convert to new API

[Mark Brown]

On Mon, Apr 05, 2010 at 06:13:36AM +0200, Marek Vasut wrote:
> Register the WM8750 as a SPI or I2C device. This patch mostly shuffles code
> around. Hugely inspired by WM8753 which was already converted.
> 
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

This looks good too, modulo the issue with needing to handle all the
existing machine drivers.

Re: [PATCH 3/3] Zipit Z2 WM8750 aSoC driver

[Liam Girdwood]

On Mon, 2010-04-05 at 14:42 +0100, Mark Brown wrote:
> On Mon, Apr 05, 2010 at 06:13:38AM +0200, Marek Vasut wrote:
> > This patch adds support for sound through the WM8750 codec on Zipit Z2.
> > Also, this patch incorporates support for detecting headset jack
> > insertion through the jack detection API.
> > 
> > Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> 
> This all looks good.

Fine by me too.

Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

-- 
Freelance Developer, SlimLogic Ltd
ASoC and Voltage Regulator Maintainer.
http://www.slimlogic.co.uk

Re: [PATCH 2/3] WM8750: Fix SPITZ machine

[Marek Vasut]

Dne Po 5. dubna 2010 15:41:07 Mark Brown napsal(a):
> On Mon, Apr 05, 2010 at 06:13:37AM +0200, Marek Vasut wrote:
> > This patch registers the WM8750 codec on a proper place on the SPITZ
> > machine after the WM8750 driver was converted to new API. Moreover, the
> > incorrect code
> 
> We also need this for the Jive machine.  FWIW I'm checking for affected
> machines by doing 'grep -l wm8750 sound/soc/*/*.c'.

Will send a separate patch for that
> 
> > is hereby removed from the aSoC driver.
> 
> ASoC.
> 
> > diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
> > index c4cd2ac..d256f5f 100644
> > --- a/sound/soc/pxa/spitz.c
> > +++ b/sound/soc/pxa/spitz.c
> > @@ -322,17 +322,10 @@ static struct snd_soc_card snd_soc_spitz = {
> >  	.num_links = 1,
> >  };
> >
> > -/* spitz audio private data */
> > -static struct wm8750_setup_data spitz_wm8750_setup = {
> > -	.i2c_bus = 0,
> > -	.i2c_address = 0x1b,
> > -};
> > -
> >  /* spitz audio subsystem */
> >  static struct snd_soc_device spitz_snd_devdata = {
> >  	.card = &snd_soc_spitz,
> >  	.codec_dev = &soc_codec_dev_wm8750,
> > -	.codec_data = &spitz_wm8750_setup,
> >  };
> 
> So, this is going to break spitz if not merged in with the patch to
> update wm8750 since prior to the conversion of the driver the setup data
> is required while after the conversion the setup data structure no
> longer exists and will therefore cause compile failures.
> 
> As I've mentioned several times before I urge you to look at how this
> transition was done for wm8731 for an example of how this sort of change
> can be done without too much disruption.
> 
Can you possibly elaborate ? I was unable to find it.
Thanks

Re: [PATCH 2/3] WM8750: Fix SPITZ machine

[Mark Brown]

On Wed, Apr 07, 2010 at 10:50:22PM +0200, Marek Vasut wrote:
> Dne Po 5. dubna 2010 15:41:07 Mark Brown napsal(a):

> > As I've mentioned several times before I urge you to look at how this
> > transition was done for wm8731 for an example of how this sort of change
> > can be done without too much disruption.

> Can you possibly elaborate ? I was unable to find it.

Commit 5998102b9095fdb7c67755812038612afea315c5 upstream:

http://git.kernel.org/?p=linux/kernel/git/broonie/sound-2.6.git;a=commit;h=5998102b9095fdb7c67755812038612afea315c5

Notice how this updates both the machines and the CODEC in the same
patch so things always compile and run.

[PATCH] WM8750: Convert to new API

[Marek Vasut]

Register the WM8750 as a SPI or I2C device. This patch mostly shuffles code
around. Hugely inspired by WM8753 which was already converted.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 sound/soc/codecs/wm8750.c       |  295 ++++++++++++++++++---------------------
 sound/soc/pxa/spitz.c           |   43 +++++-
 sound/soc/s3c24xx/jive_wm8750.c |   40 +++++-
 3 files changed, 210 insertions(+), 168 deletions(-)

diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c
index 3e440c0..eea7ba6 100644
--- a/sound/soc/codecs/wm8750.c
+++ b/sound/soc/codecs/wm8750.c
@@ -30,11 +30,6 @@
 
 #include "wm8750.h"
 
-/* codec private data */
-struct wm8750_priv {
-	unsigned int sysclk;
-};
-
 /*
  * wm8750 register cache
  * We can't read the WM8750 register space when we
@@ -54,6 +49,13 @@ static const u16 wm8750_reg[] = {
 	0x0079, 0x0079, 0x0079,          /* 40 */
 };
 
+/* codec private data */
+struct wm8750_priv {
+	unsigned int sysclk;
+	struct snd_soc_codec codec;
+	u16 reg_cache[ARRAY_SIZE(wm8750_reg)];
+};
+
 #define wm8750_reset(c)	snd_soc_write(c, WM8750_RESET, 0)
 
 /*
@@ -696,25 +698,90 @@ static int wm8750_resume(struct platform_device *pdev)
 	return 0;
 }
 
+static struct snd_soc_codec *wm8750_codec;
+
+static int wm8750_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	if (!wm8750_codec) {
+		dev_err(&pdev->dev, "WM8750 codec not yet registered\n");
+		return -EINVAL;
+	}
+
+	socdev->card->codec = wm8750_codec;
+	codec = wm8750_codec;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		printk(KERN_ERR "wm8750: failed to create pcms\n");
+		goto err;
+	}
+
+	snd_soc_add_controls(codec, wm8750_snd_controls,
+				ARRAY_SIZE(wm8750_snd_controls));
+	wm8750_add_widgets(codec);
+
+	return 0;
+
+err:
+	return ret;
+}
+
+/* power down chip */
+static int wm8750_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8750 = {
+	.probe		= wm8750_probe,
+	.remove		= wm8750_remove,
+	.suspend	= wm8750_suspend,
+	.resume		= wm8750_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8750);
+
 /*
  * initialise the WM8750 driver
  * register the mixer and dsp interfaces with the kernel
  */
-static int wm8750_init(struct snd_soc_device *socdev,
-		       enum snd_soc_control_type control)
+static int wm8750_register(struct wm8750_priv *wm8750,
+			enum snd_soc_control_type control)
 {
-	struct snd_soc_codec *codec = socdev->card->codec;
+	struct snd_soc_codec *codec = &wm8750->codec;
 	int reg, ret = 0;
 
+	if (wm8750_codec) {
+		dev_err(codec->dev, "Multiple WM8750 devices not supported\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
 	codec->name = "WM8750";
 	codec->owner = THIS_MODULE;
+	codec->bias_level = SND_SOC_BIAS_STANDBY;
 	codec->set_bias_level = wm8750_set_bias_level;
 	codec->dai = &wm8750_dai;
 	codec->num_dai = 1;
-	codec->reg_cache_size = ARRAY_SIZE(wm8750_reg);
-	codec->reg_cache = kmemdup(wm8750_reg, sizeof(wm8750_reg), GFP_KERNEL);
-	if (codec->reg_cache == NULL)
-		return -ENOMEM;
+	codec->private_data = wm8750;
+	codec->reg_cache_size = ARRAY_SIZE(wm8750->reg_cache) + 1;
+	codec->reg_cache = &wm8750->reg_cache;
+	codec->private_data = wm8750;
+
+	memcpy(codec->reg_cache, wm8750_reg, sizeof(wm8750->reg_cache));
 
 	ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
 	if (ret < 0) {
@@ -728,13 +795,6 @@ static int wm8750_init(struct snd_soc_device *socdev,
 		goto err;
 	}
 
-	/* register pcms */
-	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
-	if (ret < 0) {
-		printk(KERN_ERR "wm8750: failed to create pcms\n");
-		goto err;
-	}
-
 	/* charge output caps */
 	wm8750_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 
@@ -756,19 +816,37 @@ static int wm8750_init(struct snd_soc_device *socdev,
 	reg = snd_soc_read(codec, WM8750_RINVOL);
 	snd_soc_write(codec, WM8750_RINVOL, reg | 0x0100);
 
-	snd_soc_add_controls(codec, wm8750_snd_controls,
-				ARRAY_SIZE(wm8750_snd_controls));
-	wm8750_add_widgets(codec);
-	return ret;
+	wm8750_codec = codec;
 
+	ret = snd_soc_register_codec(codec);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		goto err;
+	}
+
+	ret = snd_soc_register_dais(&wm8750_dai, 1);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register DAIs: %d\n", ret);
+		goto err_codec;
+	}
+
+	return 0;
+
+err_codec:
+	snd_soc_unregister_codec(codec);
 err:
-	kfree(codec->reg_cache);
+	kfree(wm8750);
 	return ret;
 }
 
-/* If the i2c layer weren't so broken, we could pass this kind of data
-   around */
-static struct snd_soc_device *wm8750_socdev;
+static void wm8750_unregister(struct wm8750_priv *wm8750)
+{
+	wm8750_set_bias_level(&wm8750->codec, SND_SOC_BIAS_OFF);
+	snd_soc_unregister_dais(&wm8750_dai, 1);
+	snd_soc_unregister_codec(&wm8750->codec);
+	kfree(wm8750);
+	wm8750_codec = NULL;
+}
 
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 
@@ -782,24 +860,26 @@ static struct snd_soc_device *wm8750_socdev;
 static int wm8750_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
-	struct snd_soc_device *socdev = wm8750_socdev;
-	struct snd_soc_codec *codec = socdev->card->codec;
-	int ret;
+	struct snd_soc_codec *codec;
+	struct wm8750_priv *wm8750;
 
-	i2c_set_clientdata(i2c, codec);
+	wm8750 = kzalloc(sizeof(struct wm8750_priv), GFP_KERNEL);
+	if (wm8750 == NULL)
+		return -ENOMEM;
+
+	codec = &wm8750->codec;
 	codec->control_data = i2c;
+	i2c_set_clientdata(i2c, wm8750);
 
-	ret = wm8750_init(socdev, SND_SOC_I2C);
-	if (ret < 0)
-		pr_err("failed to initialise WM8750\n");
+	codec->dev = &i2c->dev;
 
-	return ret;
+	return wm8750_register(wm8750, SND_SOC_I2C);
 }
 
 static int wm8750_i2c_remove(struct i2c_client *client)
 {
-	struct snd_soc_codec *codec = i2c_get_clientdata(client);
-	kfree(codec->reg_cache);
+	struct wm8750_priv *wm8750 = i2c_get_clientdata(client);
+	wm8750_unregister(wm8750);
 	return 0;
 }
 
@@ -818,66 +898,31 @@ static struct i2c_driver wm8750_i2c_driver = {
 	.remove =   wm8750_i2c_remove,
 	.id_table = wm8750_i2c_id,
 };
-
-static int wm8750_add_i2c_device(struct platform_device *pdev,
-				 const struct wm8750_setup_data *setup)
-{
-	struct i2c_board_info info;
-	struct i2c_adapter *adapter;
-	struct i2c_client *client;
-	int ret;
-
-	ret = i2c_add_driver(&wm8750_i2c_driver);
-	if (ret != 0) {
-		dev_err(&pdev->dev, "can't add i2c driver\n");
-		return ret;
-	}
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	info.addr = setup->i2c_address;
-	strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
-
-	adapter = i2c_get_adapter(setup->i2c_bus);
-	if (!adapter) {
-		dev_err(&pdev->dev, "can't get i2c adapter %d\n",
-			setup->i2c_bus);
-		goto err_driver;
-	}
-
-	client = i2c_new_device(adapter, &info);
-	i2c_put_adapter(adapter);
-	if (!client) {
-		dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
-			(unsigned int)info.addr);
-		goto err_driver;
-	}
-
-	return 0;
-
-err_driver:
-	i2c_del_driver(&wm8750_i2c_driver);
-	return -ENODEV;
-}
 #endif
 
 #if defined(CONFIG_SPI_MASTER)
 static int __devinit wm8750_spi_probe(struct spi_device *spi)
 {
-	struct snd_soc_device *socdev = wm8750_socdev;
-	struct snd_soc_codec *codec = socdev->card->codec;
-	int ret;
+	struct snd_soc_codec *codec;
+	struct wm8750_priv *wm8750;
 
+	wm8750 = kzalloc(sizeof(struct wm8750_priv), GFP_KERNEL);
+	if (wm8750 == NULL)
+		return -ENOMEM;
+
+	codec = &wm8750->codec;
 	codec->control_data = spi;
+	codec->dev = &spi->dev;
 
-	ret = wm8750_init(socdev, SND_SOC_SPI);
-	if (ret < 0)
-		dev_err(&spi->dev, "failed to initialise WM8750\n");
+	dev_set_drvdata(&spi->dev, wm8750);
 
-	return ret;
+	return wm8750_register(wm8750, SND_SOC_SPI);
 }
 
 static int __devexit wm8750_spi_remove(struct spi_device *spi)
 {
+	struct wm8750_priv *wm8750 = dev_get_drvdata(&spi->dev);
+	wm8750_unregister(wm8750);
 	return 0;
 }
 
@@ -892,93 +937,31 @@ static struct spi_driver wm8750_spi_driver = {
 };
 #endif
 
-static int wm8750_probe(struct platform_device *pdev)
+static int __init wm8750_modinit(void)
 {
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct wm8750_setup_data *setup = socdev->codec_data;
-	struct snd_soc_codec *codec;
-	struct wm8750_priv *wm8750;
 	int ret;
-
-	codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
-	if (codec == NULL)
-		return -ENOMEM;
-
-	wm8750 = kzalloc(sizeof(struct wm8750_priv), GFP_KERNEL);
-	if (wm8750 == NULL) {
-		kfree(codec);
-		return -ENOMEM;
-	}
-
-	codec->private_data = wm8750;
-	socdev->card->codec = codec;
-	mutex_init(&codec->mutex);
-	INIT_LIST_HEAD(&codec->dapm_widgets);
-	INIT_LIST_HEAD(&codec->dapm_paths);
-	wm8750_socdev = socdev;
-
-	ret = -ENODEV;
-
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-	if (setup->i2c_address) {
-		ret = wm8750_add_i2c_device(pdev, setup);
-	}
+	ret = i2c_add_driver(&wm8750_i2c_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM8750 I2C driver: %d\n", ret);
 #endif
 #if defined(CONFIG_SPI_MASTER)
-	if (setup->spi) {
-		ret = spi_register_driver(&wm8750_spi_driver);
-		if (ret != 0)
-			printk(KERN_ERR "can't add spi driver");
-	}
+	ret = spi_register_driver(&wm8750_spi_driver);
+	if (ret != 0)
+		pr_err("Failed to register WM8750 SPI driver: %d\n", ret);
 #endif
-
-	if (ret != 0) {
-		kfree(codec->private_data);
-		kfree(codec);
-	}
-	return ret;
+	return 0;
 }
+module_init(wm8750_modinit);
 
-/* power down chip */
-static int wm8750_remove(struct platform_device *pdev)
+static void __exit wm8750_exit(void)
 {
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct snd_soc_codec *codec = socdev->card->codec;
-
-	if (codec->control_data)
-		wm8750_set_bias_level(codec, SND_SOC_BIAS_OFF);
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-	i2c_unregister_device(codec->control_data);
 	i2c_del_driver(&wm8750_i2c_driver);
 #endif
 #if defined(CONFIG_SPI_MASTER)
 	spi_unregister_driver(&wm8750_spi_driver);
 #endif
-	kfree(codec->private_data);
-	kfree(codec);
-
-	return 0;
-}
-
-struct snd_soc_codec_device soc_codec_dev_wm8750 = {
-	.probe = 	wm8750_probe,
-	.remove = 	wm8750_remove,
-	.suspend = 	wm8750_suspend,
-	.resume =	wm8750_resume,
-};
-EXPORT_SYMBOL_GPL(soc_codec_dev_wm8750);
-
-static int __init wm8750_modinit(void)
-{
-	return snd_soc_register_dai(&wm8750_dai);
-}
-module_init(wm8750_modinit);
-
-static void __exit wm8750_exit(void)
-{
-	snd_soc_unregister_dai(&wm8750_dai);
 }
 module_exit(wm8750_exit);
 
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index c4cd2ac..1941a35 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -322,19 +322,44 @@ static struct snd_soc_card snd_soc_spitz = {
 	.num_links = 1,
 };
 
-/* spitz audio private data */
-static struct wm8750_setup_data spitz_wm8750_setup = {
-	.i2c_bus = 0,
-	.i2c_address = 0x1b,
-};
-
 /* spitz audio subsystem */
 static struct snd_soc_device spitz_snd_devdata = {
 	.card = &snd_soc_spitz,
 	.codec_dev = &soc_codec_dev_wm8750,
-	.codec_data = &spitz_wm8750_setup,
 };
 
+/*
+ * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
+ * New drivers should register the wm8750 I2C device in the machine
+ * setup code (under arch/arm for ARM systems).
+ */
+static int wm8750_i2c_register(void)
+{
+	struct i2c_board_info info;
+	struct i2c_adapter *adapter;
+	struct i2c_client *client;
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = 0x1b;
+	strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
+
+	adapter = i2c_get_adapter(0);
+	if (!adapter) {
+		printk(KERN_ERR "can't get i2c adapter 0\n");
+		return -ENODEV;
+	}
+
+	client = i2c_new_device(adapter, &info);
+	i2c_put_adapter(adapter);
+	if (!client) {
+		printk(KERN_ERR "can't add i2c device at 0x%x\n",
+		(unsigned int)info.addr);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static struct platform_device *spitz_snd_device;
 
 static int __init spitz_init(void)
@@ -344,6 +369,10 @@ static int __init spitz_init(void)
 	if (!(machine_is_spitz() || machine_is_borzoi() || machine_is_akita()))
 		return -ENODEV;
 
+	ret = wm8750_i2c_setup();
+	if (ret != 0)
+		return ret;
+
 	spitz_snd_device = platform_device_alloc("soc-audio", -1);
 	if (!spitz_snd_device)
 		return -ENOMEM;
diff --git a/sound/soc/s3c24xx/jive_wm8750.c b/sound/soc/s3c24xx/jive_wm8750.c
index 59dc2c6..b9d85c6 100644
--- a/sound/soc/s3c24xx/jive_wm8750.c
+++ b/sound/soc/s3c24xx/jive_wm8750.c
@@ -152,17 +152,43 @@ static struct snd_soc_card snd_soc_machine_jive = {
 	.num_links	= 1,
 };
 
-/* jive audio private data */
-static struct wm8750_setup_data jive_wm8750_setup = {
-};
-
 /* jive audio subsystem */
 static struct snd_soc_device jive_snd_devdata = {
 	.card		= &snd_soc_machine_jive,
 	.codec_dev	= &soc_codec_dev_wm8750,
-	.codec_data	= &jive_wm8750_setup,
 };
 
+/*
+ * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
+ * New drivers should register the wm8750 I2C device in the machine
+ * setup code (under arch/arm for ARM systems).
+ */
+static int wm8750_i2c_register(void)
+{
+	struct i2c_board_info info;
+	struct i2c_adapter *adapter;
+	struct i2c_client *client;
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
+
+	adapter = i2c_get_adapter(0);
+	if (!adapter) {
+		printk(KERN_ERR "can't get i2c adapter 0\n");
+		return -ENODEV;
+	}
+
+	client = i2c_new_device(adapter, &info);
+	i2c_put_adapter(adapter);
+	if (!client) {
+		printk(KERN_ERR "can't add i2c device at 0x%x\n",
+		(unsigned int)info.addr);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static struct platform_device *jive_snd_device;
 
 static int __init jive_init(void)
@@ -172,6 +198,10 @@ static int __init jive_init(void)
 	if (!machine_is_jive())
 		return 0;
 
+	ret = wm8750_i2c_setup();
+	if (ret != 0)
+		return ret;
+
 	printk("JIVE WM8750 Audio support\n");
 
 	jive_snd_device = platform_device_alloc("soc-audio", -1);
-- 
1.7.0

Re: [PATCH] WM8750: Convert to new API

[Mark Brown]

On Thu, Apr 08, 2010 at 04:51:49PM +0200, Marek Vasut wrote:

> @@ -172,6 +198,10 @@ static int __init jive_init(void)
>  	if (!machine_is_jive())
>  		return 0;
>  
> +	ret = wm8750_i2c_setup();
> +	if (ret != 0)
> +		return ret;
> +

The WM8750 on the JIVE is connected using SPI, not I2C.  You'll want to
CC in the JIVE and S3C maintainer too (Ben Dooks for both).  Looking at
the Jive machine file it's actually registering the SPI device in
arch/arm already so there shouldn't be any need to add any registration
code at all.

Re: [PATCH 3/3] Zipit Z2 WM8750 aSoC driver

[Marek Vasut]

Dne Po 5. dubna 2010 16:12:18 Liam Girdwood napsal(a):
> On Mon, 2010-04-05 at 14:42 +0100, Mark Brown wrote:
> > On Mon, Apr 05, 2010 at 06:13:38AM +0200, Marek Vasut wrote:
> > > This patch adds support for sound through the WM8750 codec on Zipit Z2.
> > > Also, this patch incorporates support for detecting headset jack
> > > insertion through the jack detection API.
> > >
> > > Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> >
> > This all looks good.
> 
> Fine by me too.
> 
> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
> 
Mark, can you apply this as well? Thanks

Re: [PATCH 3/3] Zipit Z2 WM8750 aSoC driver

[Mark Brown]

On Fri, Apr 09, 2010 at 11:48:22PM +0200, Marek Vasut wrote:

> Mark, can you apply this as well? Thanks

Applied, thanks.  

Stuff like this is one of the reasons it's better to send patches as new
rather than as replies (and resend the whole series) - especially when
you send many revisions of things it can be hard to track which versions
are current.

Re: [PATCH 3/3] Zipit Z2 WM8750 aSoC driver

[Marek Vasut]

Dne Po 12. dubna 2010 12:37:02 Mark Brown napsal(a):
> On Fri, Apr 09, 2010 at 11:48:22PM +0200, Marek Vasut wrote:
> > Mark, can you apply this as well? Thanks
> 
> Applied, thanks.
> 
> Stuff like this is one of the reasons it's better to send patches as new
> rather than as replies (and resend the whole series) - especially when
> you send many revisions of things it can be hard to track which versions
> are current.

Thanks a lot, will remember that. Thanks for guiding me through.