alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 0/8] ASoC: TWL4030: put the codec to off when not active
@ 2010-05-26  8:38 Peter Ujfalusi
  2010-05-26  8:38 ` [PATCH v2 1/8] ASoC: TWL4030: Revisit codec defaults Peter Ujfalusi
                   ` (8 more replies)
  0 siblings, 9 replies; 11+ messages in thread
From: Peter Ujfalusi @ 2010-05-26  8:38 UTC (permalink / raw)
  To: alsa-devel; +Cc: broonie, lrg

Hello,

Changes since v1:
- Patch 3: removed the shifting of offset cancellation value
- Added register content reset functionality as suggested by Liam and Mark

I have added Mark's Acked-by to patch 1-7, patch 8 is a new one, which shall
address the comments regarding to the register content reset.

To-do after this series:
Revisit the register reset functionality to use burst write.

Intro mail from the original series:

The following series at the end will let the twl4030 codec to use BIAS_OFF
instead of BIAS_STANDBY.
The difference in power consumption is about 0.5mA.

To achieve this:
- The regcache has been reseted to codec default
- The codec initialization has been optimized, it is no longer writes all 73
  registers at startup, but only modifies few selected one.
- The power related code has been cleaned up, and optimized
- Support added for machine drivers to select the offset cancellation path
- debug support for checking the codec default registers (machine drivers can
  ask for checking, but shall be disabled in production).
- Added codec register reset functionality

I guess that's it.
The driver has been tested on a custom board with twl5031. It passed all of our
internal test cases covering much of the codec features.

---
Peter Ujfalusi (8):
  ASoC: TWL4030: Revisit codec defaults
  ASoC: TWL4030: Remove wrapper for power down
  ASoC: TWL4030: Make offset cancellation path configurable
  ASoC: TWL4030: Optimize the power up sequence
  ASoC: TWL4030: Helper to check chip default registers
  ASoC: TWL4030: Correct the ARXR2_APGA_CTL chip default
  ASoC: TWL4030: Use BIAS_OFF instead of BIAS_STANDBY, when not in use
  ASoC: TWL4030: Add functionalty to reset the registers

 sound/soc/codecs/twl4030.c |  291 +++++++++++++++++++++++++-------------------
 sound/soc/codecs/twl4030.h |    3 +
 2 files changed, 169 insertions(+), 125 deletions(-)

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2010-05-31  9:39 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-05-26  8:38 [PATCH v2 0/8] ASoC: TWL4030: put the codec to off when not active Peter Ujfalusi
2010-05-26  8:38 ` [PATCH v2 1/8] ASoC: TWL4030: Revisit codec defaults Peter Ujfalusi
2010-05-26  8:38 ` [PATCH v2 2/8] ASoC: TWL4030: Remove wrapper for power down Peter Ujfalusi
2010-05-26  8:38 ` [PATCH v2 3/8] ASoC: TWL4030: Make offset cancellation path configurable Peter Ujfalusi
2010-05-26  8:38 ` [PATCH v2 4/8] ASoC: TWL4030: Optimize the power up sequence Peter Ujfalusi
2010-05-26  8:38 ` [PATCH v2 5/8] ASoC: TWL4030: Helper to check chip default registers Peter Ujfalusi
2010-05-26  8:38 ` [PATCH v2 6/8] ASoC: TWL4030: Correct the ARXR2_APGA_CTL chip default Peter Ujfalusi
2010-05-26  8:38 ` [PATCH v2 7/8] ASoC: TWL4030: Use BIAS_OFF instead of BIAS_STANDBY, when not in use Peter Ujfalusi
2010-05-26  8:38 ` [PATCH v2 8/8] ASoC: TWL4030: Add functionalty to reset the registers Peter Ujfalusi
2010-05-26 20:09   ` Mark Brown
2010-05-31  9:39 ` [PATCH v2 0/8] ASoC: TWL4030: put the codec to off when not active Liam Girdwood

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).