From: Daniel Mack <daniel-rDUAYElUppE@public.gmane.org>
To: Demian Martin <demianm_1-/E1597aS9LQAvxtiuMwx3w@public.gmane.org>
Cc: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
"'J. Gordon Rankin'"
<waudio-P3U7sUXGDiZeoWH0uzbU5w@public.gmane.org>,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: Problem with USB Class 2 Audio Driver
Date: Mon, 23 Aug 2010 21:12:09 +0200 [thread overview]
Message-ID: <20100823191209.GF17833@buzzloop.caiaq.de> (raw)
In-Reply-To: <060e01cb4255$007593b0$0160bb10$@com>
Hi,
FWIW, I currently have no clue what could be the reason for this issue.
I copied the linux-usb mailing list, maybe anyone over there has an
idea.
Summary is: Demian is trying to play back an audio file over an USB
connected soundcard, and the file itself is also stored on a media
connected via USB. The transfer alone seems to be reasonably fast
(tested with 'dd'), and the card itself also works fine (tested with a
file stored on a different media), but the combination of them both
fails. At least for high sample rates - iow, high data throughput.
Could there be anything wrong with the isochronous bandwith reservation?
Thanks,
Daniel
On Sun, Aug 22, 2010 at 04:51:55PM -0700, Demian Martin wrote:
> Daniel:
> I'll try to provide all the info you want. I'll need some prompting for some
> details, please be patient with me.
>
> First the system.
> I have tested on both an intel D945GSEJT atom based MB and an Alis 3.3 AMD
> Geode based mb.
> OS: Linux auraliti-player 2.6.32auraliti-2.0 #1 PREEMPT Fri Jul 30 06:48:14
> GMT 2010 i686 GNU/Linux
> Distro Voyage Linux 0.6.1
> It's a dedicated headless 2 channel audio player, sort of a high performance
> squeezebox. Details here: www.auraliti.com
>
> When I play a file from a network source (connected through nfs) I have no
> problems with either .wav or .flac.
>
> I don't know how to tell with certainty if the USB devices are connecting
> through a common or separate root hubs.
>
> USB stick speed- It took 6.2 seconds to pass a 1 minute 19 second 192/24
> file to dev/null so USB speed is not a problem.
>
> It seems there is a collision when there is a high speed USB storage device
> and the USB class 2 audio on the same host port both moving data at the same
> time.
>
> All of the following were done with the Alix board (Geode 500 MHz
> processor). The Intel does similar but seems more likely to work.
>
> Under some conditions the system loses connection to the USB audio device:
> auraliti-player:~# aplay -v -Dplughw:1
> /media/usb0/Trio-Mytek8X192ADDA-192k.WAV
> Playing WAVE '/media/usb0/Trio-Mytek8X192ADDA-192k.WAV' : Signed 24 bit
> Little Endian in 3bytes, Rate 192000 Hz, Stereo
> aplay: set_params:1116: Unable to install hw params:
> ACCESS: RW_INTERLEAVED
> FORMAT: S24_3LE
> SUBFORMAT: STD
> SAMPLE_BITS: 24
> FRAME_BITS: 48
> CHANNELS: 2
> RATE: 192000
> PERIOD_TIME: 125000
> PERIOD_SIZE: 24000
> PERIOD_BYTES: 144000
> PERIODS: 4
> BUFFER_TIME: 500000
> BUFFER_SIZE: 96000
> BUFFER_BYTES: 576000
> TICK_TIME: 0
> auraliti-player:~#
>
> Fixed by disconnecting and reconnecting the device.
>
>
> Here is what I get playing a 44.1 file, after about 15 seconds:
>
> Playing WAVE '/media/usb0/Piano_44_1.wav' : Signed 24 bit Little Endian in
> 3bytes, Rate 44100 Hz, Stereo
> Plug PCM: Linear conversion PCM (S32_LE)
> Its setup is:
> stream : PLAYBACK
> access : RW_INTERLEAVED
> format : S24_3LE
> subformat : STD
> channels : 2
> rate : 44100
> exact rate : 44100 (44100/1)
> msbits : 24
> buffer_size : 22050
> period_size : 5513
> period_time : 125011
> tstamp_mode : NONE
> period_step : 1
> avail_min : 5513
> period_event : 0
> start_threshold : 22050
> stop_threshold : 22050
> silence_threshold: 0
> silence_size : 0
> boundary : 1445068800
> Slave: Hardware PCM card 1 'WaveLink HS SPDIF' device 0 subdevice 0
> Its setup is:
> stream : PLAYBACK
> access : MMAP_INTERLEAVED
> format : S32_LE
> subformat : STD
> channels : 2
> rate : 44100
> exact rate : 44100 (44100/1)
> msbits : 32
> buffer_size : 22050
> period_size : 5513
> period_time : 125011
> tstamp_mode : NONE
> period_step : 1
> avail_min : 5513
> period_event : 0
> start_threshold : 22050
> stop_threshold : 22050
> silence_threshold: 0
> silence_size : 0
> boundary : 1445068800
> appl_ptr : 0
> hw_ptr : 0
> underrun!!! (at least 0.015 ms long)
> Status:
> state : XRUN
> trigger_time: 903.806908643
> tstamp : 903.807038997
> delay : 0
> avail : 0
> avail_max : 11028
> aplay: xrun:1259: xrun: prepare error: File descriptor in bad state
> auraliti-player:~#
>
> And the system stops playing.
>
> And very quickly on a 176.4 file:
>
> Playing WAVE '/media/usb0/01_Rimsky-Korsakov Dance of the Tumblers.wav' :
> Signed 24 bit Little Endian in 3bytes, Rate 176400 Hz, Stereo
> Plug PCM: Linear conversion PCM (S32_LE)
> Its setup is:
> stream : PLAYBACK
> access : RW_INTERLEAVED
> format : S24_3LE
> subformat : STD
> channels : 2
> rate : 176400
> exact rate : 176400 (176400/1)
> msbits : 24
> buffer_size : 88200
> period_size : 22050
> period_time : 125000
> tstamp_mode : NONE
> period_step : 1
> avail_min : 22050
> period_event : 0
> start_threshold : 88200
> stop_threshold : 88200
> silence_threshold: 0
> silence_size : 0
> boundary : 1445068800
> Slave: Hardware PCM card 1 'WaveLink HS SPDIF' device 0 subdevice 0
> Its setup is:
> stream : PLAYBACK
> access : MMAP_INTERLEAVED
> format : S32_LE
> subformat : STD
> channels : 2
> rate : 176400
> exact rate : 176400 (176400/1)
> msbits : 32
> buffer_size : 88200
> period_size : 22050
> period_time : 125000
> tstamp_mode : NONE
> period_step : 1
> avail_min : 22050
> period_event : 0
> start_threshold : 88200
> stop_threshold : 88200
> silence_threshold: 0
> silence_size : 0
> boundary : 1445068800
> appl_ptr : 0
> hw_ptr : 0
> underrun!!! (at least 0.010 ms long)
> Status:
> state : XRUN
> trigger_time: 1050.313984810
> tstamp : 1050.314067000
> delay : 0
> avail : 1413
> avail_max : 22071
> aplay: xrun:1259: xrun: prepare error: File descriptor in bad state
> auraliti-player:~#
>
> If in interpose a USB 1 hub on the usb storage I get this:
>
> auraliti-player:~# aplay -v -Dplughw:1 /media/usb0/01_Rimsky-Korsakov\
> Dance\ of\ the\ Tumblers.wav
> Playing WAVE '/media/usb0/01_Rimsky-Korsakov Dance of the Tumblers.wav' :
> Signed 24 bit Little Endian in 3bytes, Rate 176400 Hz, Stereo
> Plug PCM: Linear conversion PCM (S32_LE)
> Its setup is:
> stream : PLAYBACK
> access : RW_INTERLEAVED
> format : S24_3LE
> subformat : STD
> channels : 2
> rate : 176400
> exact rate : 176400 (176400/1)
> msbits : 24
> buffer_size : 88200
> period_size : 22050
> period_time : 125000
> tstamp_mode : NONE
> period_step : 1
> avail_min : 22050
> period_event : 0
> start_threshold : 88200
> stop_threshold : 88200
> silence_threshold: 0
> silence_size : 0
> boundary : 1445068800
> Slave: Hardware PCM card 1 'WaveLink HS SPDIF' device 0 subdevice 0
> Its setup is:
> stream : PLAYBACK
> access : MMAP_INTERLEAVED
> format : S32_LE
> subformat : STD
> channels : 2
> rate : 176400
> exact rate : 176400 (176400/1)
> msbits : 32
> buffer_size : 88200
> period_size : 22050
> period_time : 125000
> tstamp_mode : NONE
> period_step : 1
> avail_min : 22050
> period_event : 0
> start_threshold : 88200
> stop_threshold : 88200
> silence_threshold: 0
> silence_size : 0
> boundary : 1445068800
> appl_ptr : 0
> hw_ptr : 0
> underrun!!! (at least 1.537 ms long)
> Status:
> state : XRUN
> trigger_time: 1219.804905467
> tstamp : 1219.820257912
> delay : 0
> avail : 88220
> avail_max : 88220
> underrun!!! (at least 13.900 ms long)
> Status:
> state : XRUN
> trigger_time: 1222.763695807
> tstamp : 1222.902684537
> delay : 0
> avail : 66169
> avail_max : 88219
> underrun!!! (at least 1.279 ms long)
> Status:
> state : XRUN
> trigger_time: 1225.972436940
> tstamp : 1225.985216250
> delay : 0
> avail : 88221
> avail_max : 88221
> underrun!!! (at least 14.141 ms long)
>
> etc. until I stop the playback.
>
> 44.1 playback is fine under these conditions (but then why USB audio class
> 2?)
>
> Further, using MPD for playback I have discovered that the high bit rate
> flac files play fine but the same files as wave have the same type of
> stall/stop problems.
>
> I tried Windows on the Intel platform with similar problems using windows
> media player but no problems with VLC. However with Windows it is not easy
> to know what is really going on inside.
>
> Is it possible that the essentially synchronous nature of playing a wave
> file from USB source to USB Audio device causes a collision since the data
> is going both ways at essentially the same rate and timing?
>
> Let me know what other info you need.
>
> Thanks for looking at this.
> -Demian
>
>
>
>
> -----Original Message-----
> From: Daniel Mack [mailto:daniel-rDUAYElUppE@public.gmane.org]
> Sent: Saturday, August 21, 2010 2:27 AM
> To: Demian Martin
> Cc: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org
> Subject: Re: Problem with USB Class 2 Audio Driver
>
> On Fri, Aug 20, 2010 at 05:40:22PM -0700, Demian Martin wrote:
> > I'm testing an early sample of the Wavelength Wavelink, a USB to S/PDIF
> > adapter that supports 44.1-192 KHz sample rates and uses async usb to talk
> > to ALSA. It works and plays all of the sample rates correctly with the git
> > version of Alsa from 7/30/2010 whenthe files are sourced from the network.
>
> What do you mean by "from the network"? How does your test setup look
> like?
>
> > However if I try to play from a usb source to the usb dac it doesn't work
> > and the whole system gets unstable.
>
> You could also be more precise here :) What doesn't work, how are you
> testing, and in which regard does the system get unstable?
>
> > The platforms I have tested it on seem
> > to have a single USB host interface but with USB 2 there should be enough
> > bandwidth to pass the data from a USB stick to the cpu and back. If I use
> an
> > older 96 only usb dac on the same system it works (unless the down
> > conversion isn't a direct divide, which overloads the CPU, but that is a
> > different issue). The problem seems to be sample rate independent and hits
> > the moment I try to access the file. This is using MPD as a player.
>
> Ah, so your data file is stored on a media which is also connected to
> USB? Did you connect the two devices to different USB ports or do they
> share one uplink with a hub?
>
> > What additional info do you need to troubleshoot this? Is it an intrinsic
> > limitation to the interface? What additional tests should I do? It's
> > possible it's a hardware issue but how do I divide them so I can go back
> to
> > the hardware guy if it's his issue?
>
> I'm not aware of any limitation, but there could be such issues as
> exceeded bandwith on the bus and the like. How many audio channels are
> we talking about?
>
> You could measure the speed of your USB media by using something like
> this:
>
> $ time dd if=/path/to/192khz.file of=/dev/null
>
> This should take significantly less time than - let's say - half the
> real-time audio playback time of the file, so there's enough headroom to
> transport the audio data back to the USB DAC.
>
> What kind of system is this, after all? Did you try other OS on the same
> hardware for comparsion?
>
>
> Daniel
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2010-08-23 19:12 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-21 0:40 Problem with USB Class 2 Audio Driver Demian Martin
2010-08-21 9:27 ` Daniel Mack
2010-08-22 23:51 ` Demian Martin
2010-08-23 12:41 ` J. Gordon Rankin
2010-08-23 19:12 ` Daniel Mack [this message]
[not found] ` <20100823191209.GF17833-ahpEBR4enfnCULTFXS99ULNAH6kLmebB@public.gmane.org>
2010-08-23 20:34 ` J. Gordon Rankin
[not found] ` <4C72DB6A.5080601-P3U7sUXGDiZeoWH0uzbU5w@public.gmane.org>
2010-08-24 7:06 ` Daniel Mack
[not found] ` <20100824070601.GK17833-ahpEBR4enfnCULTFXS99ULNAH6kLmebB@public.gmane.org>
2010-08-24 7:52 ` Oliver Neukum
2010-08-24 14:56 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.1008241050320.1652-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2010-09-06 18:31 ` Demian Martin
2010-09-06 20:05 ` Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100823191209.GF17833@buzzloop.caiaq.de \
--to=daniel-rduayeluppe@public.gmane.org \
--cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
--cc=demianm_1-/E1597aS9LQAvxtiuMwx3w@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=waudio-P3U7sUXGDiZeoWH0uzbU5w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox