From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wu Fengguang Subject: Re: Microphone not working on PCI ID 8086:3b56 Date: Tue, 28 Sep 2010 21:42:36 +0800 Message-ID: <20100928134236.GA15827@localhost> References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mga02.intel.com (mga02.intel.com [134.134.136.20]) by alsa0.perex.cz (Postfix) with ESMTP id C56E42433F for ; Tue, 28 Sep 2010 15:42:45 +0200 (CEST) Content-Disposition: inline In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Jeff Chua Cc: Takashi Iwai , "alsa-devel@alsa-project.org" , Linux Kernel List-Id: alsa-devel@alsa-project.org On Tue, Sep 28, 2010 at 09:33:11PM +0800, Jeff Chua wrote: > On Tue, Sep 28, 2010 at 2:18 AM, Takashi Iwai wrote: > > At Tue, 28 Sep 2010 01:56:44 +0800, > > Jeff Chua wrote: > >> > >> On Mon, Sep 27, 2010 at 10:42 PM, Takashi Iwai wrote: > >> > At Wed, 15 Sep 2010 06:32:22 +0800 (SGT), > >> > Did you try to play with model option for snd-hda-intel driver? > >> > For example, model=lenovo-x200 ? > >> > >> Didn't know there's such option. But I'll try it now. Is there an > >> option to if the driver is not compiled as a module? > > > > Yes, you can pass via a boot option like MODULENAME.OPTIONNAME=xxx,yyy,... > > In this case, snd-hda-intel.model=lenovo-x200 > > Tried, still no mic. Perhaps I'm not using the right driver. Which one > should I enable? > > CONFIG_SND_HDA_CODEC_CONEXANT The "lenovo-x200" model is provided by the above codec. > CONFIG_SND_HDA_CODEC_INTELHDMI > CONFIG_SND_HDA_CODEC_REALTEK It's easier to enable all of them. They are small modules. Thanks, Fengguang