[PATCH 01/25] ASoC: WM8580: Remove useless assignment

[PATCH 01/25] ASoC: WM8580: Remove useless assignment

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

The variable is not used anyway.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 sound/soc/codecs/wm8580.c |    4 ----
 1 files changed, 0 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c
index ad5987e..a2e0ed5 100644
--- a/sound/soc/codecs/wm8580.c
+++ b/sound/soc/codecs/wm8580.c
@@ -548,11 +548,9 @@ static int wm8580_set_paif_dai_fmt(struct snd_soc_dai *codec_dai,
 				      unsigned int fmt)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
-	struct wm8580_priv *wm8580 = snd_soc_codec_get_drvdata(codec);
 	unsigned int aifa;
 	unsigned int aifb;
 	int can_invert_lrclk;
-	int sysclk;
 
 	aifa = snd_soc_read(codec, WM8580_PAIF1 + codec_dai->driver->id);
 	aifb = snd_soc_read(codec, WM8580_PAIF3 + codec_dai->driver->id);
@@ -621,8 +619,6 @@ static int wm8580_set_paif_dai_fmt(struct snd_soc_dai *codec_dai,
 		return -EINVAL;
 	}
 
-	sysclk = wm8580->sysclk[codec_dai->driver->id];
-
 	snd_soc_write(codec, WM8580_PAIF1 + codec_dai->driver->id, aifa);
 	snd_soc_write(codec, WM8580_PAIF3 + codec_dai->driver->id, aifb);
 
-- 
1.6.2.5

Re: [PATCH 01/25] ASoC: WM8580: Remove useless assignment

[Liam Girdwood]

On Tue, 2010-10-19 at 16:04 +0900, Jassi Brar wrote:
> From: Jassi Brar <jassi.brar@samsung.com>
> 
> The variable is not used anyway.
> 
> Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
> ---

Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-- 
Freelance Developer, SlimLogic Ltd
ASoC and Voltage Regulator Maintainer.
http://www.slimlogic.co.uk

Re: [PATCH 01/25] ASoC: WM8580: Remove useless assignment

[Mark Brown]

On Tue, Oct 19, 2010 at 04:04:21PM +0900, Jassi Brar wrote:
> From: Jassi Brar <jassi.brar@samsung.com>
> 
> The variable is not used anyway.
> 
> Signed-off-by: Jassi Brar <jassi.brar@samsung.com>

Applied, thanks.  My network connection here is pretty appauling so I'm
going to give up on reviewing this series for now but from the top level
run through I gave it it all looks pretty good.

[PATCH 02/25] ASoC: Samsung: Remove redundant AQUILA driver

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

AQUILA and GONI are essentially the same h/w w.r.t ASoC.
They only differ by the fact that GONI has stereo speaker-out
whereas AQUILA has mono.

The difference can easily be handled in the same MACHINE driver
by making machine-specific runtime changes.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 sound/soc/s3c24xx/Kconfig         |   17 +--
 sound/soc/s3c24xx/Makefile        |    4 +-
 sound/soc/s3c24xx/aquila_wm8994.c |  295 -------------------------------------
 sound/soc/s3c24xx/goni_wm8994.c   |   19 +++-
 4 files changed, 23 insertions(+), 312 deletions(-)
 delete mode 100644 sound/soc/s3c24xx/aquila_wm8994.c

diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index 8a6b53c..6efdf65 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -144,22 +144,13 @@ config SND_S3C64XX_SOC_SMARTQ
 	select SND_S3C64XX_SOC_I2S
 	select SND_SOC_WM8750
 
-config SND_S5PC110_SOC_AQUILA_WM8994
-	tristate "SoC I2S Audio support for AQUILA - WM8994"
-	depends on SND_S3C24XX_SOC && MACH_AQUILA
+config SND_SOC_GONI_AQUILA_WM8994
+	tristate "SoC I2S Audio support for AQUILA/GONI - WM8994"
+	depends on SND_S3C24XX_SOC && (MACH_GONI || MACH_AQUILA)
 	select SND_S3C64XX_SOC_I2S_V4
 	select SND_SOC_WM8994
 	help
-	  Say Y if you want to add support for SoC audio on aquila
-	  with the WM8994.
-
-config SND_S5PV210_SOC_GONI_WM8994
-	tristate "SoC I2S Audio support for GONI - WM8994"
-	depends on SND_S3C24XX_SOC && MACH_GONI
-	select SND_S3C64XX_SOC_I2S_V4
-	select SND_SOC_WM8994
-	help
-	  Say Y if you want to add support for SoC audio on goni
+	  Say Y if you want to add support for SoC audio on goni or aquila
 	  with the WM8994.
 
 config SND_SOC_SMDK_SPDIF
diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile
index ee8f41d..4e232f1 100644
--- a/sound/soc/s3c24xx/Makefile
+++ b/sound/soc/s3c24xx/Makefile
@@ -33,7 +33,6 @@ snd-soc-rx1950-uda1380-objs := rx1950_uda1380.o
 snd-soc-smdk64xx-wm8580-objs := smdk64xx_wm8580.o
 snd-soc-smdk-wm9713-objs := smdk_wm9713.o
 snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o
-snd-soc-aquila-wm8994-objs := aquila_wm8994.o
 snd-soc-goni-wm8994-objs := goni_wm8994.o
 snd-soc-smdk-spdif-objs := smdk_spdif.o
 
@@ -50,6 +49,5 @@ obj-$(CONFIG_SND_S3C24XX_SOC_RX1950_UDA1380) += snd-soc-rx1950-uda1380.o
 obj-$(CONFIG_SND_S3C64XX_SOC_WM8580) += snd-soc-smdk64xx-wm8580.o
 obj-$(CONFIG_SND_SOC_SMDK_WM9713) += snd-soc-smdk-wm9713.o
 obj-$(CONFIG_SND_S3C64XX_SOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o
-obj-$(CONFIG_SND_S5PC110_SOC_AQUILA_WM8994) += snd-soc-aquila-wm8994.o
-obj-$(CONFIG_SND_S5PV210_SOC_GONI_WM8994) += snd-soc-goni-wm8994.o
 obj-$(CONFIG_SND_SOC_SMDK_SPDIF) += snd-soc-smdk-spdif.o
+obj-$(CONFIG_SND_SOC_GONI_AQUILA_WM8994) += snd-soc-goni-wm8994.o
diff --git a/sound/soc/s3c24xx/aquila_wm8994.c b/sound/soc/s3c24xx/aquila_wm8994.c
deleted file mode 100644
index 235d197..0000000
--- a/sound/soc/s3c24xx/aquila_wm8994.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * aquila_wm8994.c
- *
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
- * Author: Chanwoo Choi <cw00.choi@samsung.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <sound/soc.h>
-#include <sound/soc-dapm.h>
-#include <sound/jack.h>
-#include <asm/mach-types.h>
-#include <mach/gpio.h>
-#include <mach/regs-clock.h>
-
-#include <linux/mfd/wm8994/core.h>
-#include <linux/mfd/wm8994/registers.h>
-#include "../codecs/wm8994.h"
-#include "s3c-dma.h"
-#include "s3c64xx-i2s.h"
-
-static struct snd_soc_card aquila;
-static struct platform_device *aquila_snd_device;
-
-/* 3.5 pie jack */
-static struct snd_soc_jack jack;
-
-/* 3.5 pie jack detection DAPM pins */
-static struct snd_soc_jack_pin jack_pins[] = {
-	{
-		.pin = "Headset Mic",
-		.mask = SND_JACK_MICROPHONE,
-	}, {
-		.pin = "Headset Stereophone",
-		.mask = SND_JACK_HEADPHONE | SND_JACK_MECHANICAL |
-			SND_JACK_AVOUT,
-	},
-};
-
-/* 3.5 pie jack detection gpios */
-static struct snd_soc_jack_gpio jack_gpios[] = {
-	{
-		.gpio = S5PV210_GPH0(6),
-		.name = "DET_3.5",
-		.report = SND_JACK_HEADSET | SND_JACK_MECHANICAL |
-			SND_JACK_AVOUT,
-		.debounce_time = 200,
-	},
-};
-
-static const struct snd_soc_dapm_widget aquila_dapm_widgets[] = {
-	SND_SOC_DAPM_SPK("Ext Spk", NULL),
-	SND_SOC_DAPM_SPK("Ext Rcv", NULL),
-	SND_SOC_DAPM_HP("Headset Stereophone", NULL),
-	SND_SOC_DAPM_MIC("Headset Mic", NULL),
-	SND_SOC_DAPM_MIC("Main Mic", NULL),
-	SND_SOC_DAPM_MIC("2nd Mic", NULL),
-	SND_SOC_DAPM_LINE("Radio In", NULL),
-};
-
-static const struct snd_soc_dapm_route aquila_dapm_routes[] = {
-	{"Ext Spk", NULL, "SPKOUTLP"},
-	{"Ext Spk", NULL, "SPKOUTLN"},
-
-	{"Ext Rcv", NULL, "HPOUT2N"},
-	{"Ext Rcv", NULL, "HPOUT2P"},
-
-	{"Headset Stereophone", NULL, "HPOUT1L"},
-	{"Headset Stereophone", NULL, "HPOUT1R"},
-
-	{"IN1RN", NULL, "Headset Mic"},
-	{"IN1RP", NULL, "Headset Mic"},
-
-	{"IN1RN", NULL, "2nd Mic"},
-	{"IN1RP", NULL, "2nd Mic"},
-
-	{"IN1LN", NULL, "Main Mic"},
-	{"IN1LP", NULL, "Main Mic"},
-
-	{"IN2LN", NULL, "Radio In"},
-	{"IN2RN", NULL, "Radio In"},
-};
-
-static int aquila_wm8994_init(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_soc_codec *codec = rtd->codec;
-	int ret;
-
-	/* add aquila specific widgets */
-	snd_soc_dapm_new_controls(codec, aquila_dapm_widgets,
-			ARRAY_SIZE(aquila_dapm_widgets));
-
-	/* set up aquila specific audio routes */
-	snd_soc_dapm_add_routes(codec, aquila_dapm_routes,
-			ARRAY_SIZE(aquila_dapm_routes));
-
-	/* set endpoints to not connected */
-	snd_soc_dapm_nc_pin(codec, "IN2LP:VXRN");
-	snd_soc_dapm_nc_pin(codec, "IN2RP:VXRP");
-	snd_soc_dapm_nc_pin(codec, "LINEOUT1N");
-	snd_soc_dapm_nc_pin(codec, "LINEOUT1P");
-	snd_soc_dapm_nc_pin(codec, "LINEOUT2N");
-	snd_soc_dapm_nc_pin(codec, "LINEOUT2P");
-	snd_soc_dapm_nc_pin(codec, "SPKOUTRN");
-	snd_soc_dapm_nc_pin(codec, "SPKOUTRP");
-
-	snd_soc_dapm_sync(codec);
-
-	/* Headset jack detection */
-	ret = snd_soc_jack_new(&aquila, "Headset Jack",
-			SND_JACK_HEADSET | SND_JACK_MECHANICAL | SND_JACK_AVOUT,
-			&jack);
-	if (ret)
-		return ret;
-
-	ret = snd_soc_jack_add_pins(&jack, ARRAY_SIZE(jack_pins), jack_pins);
-	if (ret)
-		return ret;
-
-	ret = snd_soc_jack_add_gpios(&jack, ARRAY_SIZE(jack_gpios), jack_gpios);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static int aquila_hifi_hw_params(struct snd_pcm_substream *substream,
-		struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	unsigned int pll_out = 24000000;
-	int ret = 0;
-
-	/* set the cpu DAI configuration */
-	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
-			SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
-	if (ret < 0)
-		return ret;
-
-	/* set the cpu system clock */
-	ret = snd_soc_dai_set_sysclk(cpu_dai, S3C64XX_CLKSRC_PCLK,
-			0, SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	/* set codec DAI configuration */
-	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
-			SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
-	if (ret < 0)
-		return ret;
-
-	/* set the codec FLL */
-	ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL1, 0, pll_out,
-			params_rate(params) * 256);
-	if (ret < 0)
-		return ret;
-
-	/* set the codec system clock */
-	ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL1,
-			params_rate(params) * 256, SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static struct snd_soc_ops aquila_hifi_ops = {
-	.hw_params = aquila_hifi_hw_params,
-};
-
-static int aquila_voice_hw_params(struct snd_pcm_substream *substream,
-		struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	unsigned int pll_out = 24000000;
-	int ret = 0;
-
-	if (params_rate(params) != 8000)
-		return -EINVAL;
-
-	/* set codec DAI configuration */
-	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_LEFT_J |
-			SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM);
-	if (ret < 0)
-		return ret;
-
-	/* set the codec FLL */
-	ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL2, 0, pll_out,
-			params_rate(params) * 256);
-	if (ret < 0)
-		return ret;
-
-	/* set the codec system clock */
-	ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL2,
-			params_rate(params) * 256, SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static struct snd_soc_dai_driver voice_dai = {
-	.name = "aquila-voice-dai",
-	.playback = {
-		.channels_min = 1,
-		.channels_max = 2,
-		.rates = SNDRV_PCM_RATE_8000,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
-	.capture = {
-		.channels_min = 1,
-		.channels_max = 2,
-		.rates = SNDRV_PCM_RATE_8000,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
-};
-
-static struct snd_soc_ops aquila_voice_ops = {
-	.hw_params = aquila_voice_hw_params,
-};
-
-static struct snd_soc_dai_link aquila_dai[] = {
-{
-	.name = "WM8994",
-	.stream_name = "WM8994 HiFi",
-	.cpu_dai_name = "s3c64xx-i2s-v4",
-	.codec_dai_name = "wm8994-hifi",
-	.platform_name = "s3c24xx-pcm-audio",
-	.codec_name = "wm8994-codec.0-0x1a",
-	.init = aquila_wm8994_init,
-	.ops = &aquila_hifi_ops,
-}, {
-	.name = "WM8994 Voice",
-	.stream_name = "Voice",
-	.cpu_dai_name = "aquila-voice-dai",
-	.codec_dai_name = "wm8994-voice",
-	.platform_name = "s3c24xx-pcm-audio",
-	.codec_name = "wm8994-codec.0-0x1a",
-	.ops = &aquila_voice_ops,
-},
-};
-
-static struct snd_soc_card aquila = {
-	.name = "aquila",
-	.dai_link = aquila_dai,
-	.num_links = ARRAY_SIZE(aquila_dai),
-};
-
-static int __init aquila_init(void)
-{
-	int ret;
-
-	if (!machine_is_aquila())
-		return -ENODEV;
-
-	aquila_snd_device = platform_device_alloc("soc-audio", -1);
-	if (!aquila_snd_device)
-		return -ENOMEM;
-
-	/* register voice DAI here */
-	ret = snd_soc_register_dai(&aquila_snd_device->dev, &voice_dai);
-	if (ret)
-		return ret;
-
-	platform_set_drvdata(aquila_snd_device, &aquila);
-	ret = platform_device_add(aquila_snd_device);
-
-	if (ret)
-		platform_device_put(aquila_snd_device);
-
-	return ret;
-}
-
-static void __exit aquila_exit(void)
-{
-	platform_device_unregister(aquila_snd_device);
-}
-
-module_init(aquila_init);
-module_exit(aquila_exit);
-
-/* Module information */
-MODULE_DESCRIPTION("ALSA SoC WM8994 Aquila(S5PC110)");
-MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/goni_wm8994.c b/sound/soc/s3c24xx/goni_wm8994.c
index 694f702..ef22f14 100644
--- a/sound/soc/s3c24xx/goni_wm8994.c
+++ b/sound/soc/s3c24xx/goni_wm8994.c
@@ -28,6 +28,14 @@
 #include "s3c-dma.h"
 #include "s3c64xx-i2s.h"
 
+#define MACHINE_NAME	0
+#define CPU_VOICE_DAI	1
+
+static const char *aquila_str[] = {
+	[MACHINE_NAME] = "aquila",
+	[CPU_VOICE_DAI] = "aquila-voice-dai",
+};
+
 static struct snd_soc_card goni;
 static struct platform_device *goni_snd_device;
 
@@ -115,6 +123,11 @@ static int goni_wm8994_init(struct snd_soc_pcm_runtime *rtd)
 	snd_soc_dapm_nc_pin(codec, "LINEOUT2N");
 	snd_soc_dapm_nc_pin(codec, "LINEOUT2P");
 
+	if (machine_is_aquila()) {
+		snd_soc_dapm_nc_pin(codec, "SPKOUTRN");
+		snd_soc_dapm_nc_pin(codec, "SPKOUTRP");
+	}
+
 	snd_soc_dapm_sync(codec);
 
 	/* Headset jack detection */
@@ -263,7 +276,11 @@ static int __init goni_init(void)
 {
 	int ret;
 
-	if (!machine_is_goni())
+	if (machine_is_aquila()) {
+		voice_dai.name = aquila_str[CPU_VOICE_DAI];
+		goni_dai[1].cpu_dai_name = aquila_str[CPU_VOICE_DAI];
+		goni.name = aquila_str[MACHINE_NAME];
+	} else if (!machine_is_goni())
 		return -ENODEV;
 
 	goni_snd_device = platform_device_alloc("soc-audio", -1);
-- 
1.6.2.5

[PATCH 03/25] ASoC: Samsung: Rename DMA device

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Some Samsung SoCs have a PCM(DSP) controller. So the name
s3c24xx-pcm-audio for DMA driver is not very appropraite.
This patch moves :-
	s3c24xx-pcm-audio -> samsung-audio

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 arch/arm/mach-s3c64xx/dev-audio.c              |    2 +-
 arch/arm/plat-s3c24xx/devs.c                   |    2 +-
 sound/soc/s3c24xx/goni_wm8994.c                |    4 ++--
 sound/soc/s3c24xx/jive_wm8750.c                |    2 +-
 sound/soc/s3c24xx/ln2440sbc_alc650.c           |    2 +-
 sound/soc/s3c24xx/neo1973_gta02_wm8753.c       |    4 ++--
 sound/soc/s3c24xx/neo1973_wm8753.c             |    4 ++--
 sound/soc/s3c24xx/rx1950_uda1380.c             |    2 +-
 sound/soc/s3c24xx/s3c-dma.c                    |    4 ++--
 sound/soc/s3c24xx/s3c24xx_simtec_hermes.c      |    2 +-
 sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c |    2 +-
 sound/soc/s3c24xx/s3c24xx_uda134x.c            |    2 +-
 sound/soc/s3c24xx/smartq_wm8987.c              |    2 +-
 sound/soc/s3c24xx/smdk2443_wm9710.c            |    2 +-
 sound/soc/s3c24xx/smdk64xx_wm8580.c            |    4 ++--
 sound/soc/s3c24xx/smdk_spdif.c                 |    2 +-
 sound/soc/s3c24xx/smdk_wm9713.c                |    2 +-
 17 files changed, 22 insertions(+), 22 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index 3838335..c45cc37 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -340,7 +340,7 @@ void __init s3c64xx_ac97_setup_gpio(int num)
 static u64 s3c_device_audio_dmamask = 0xffffffffUL;
 
 struct platform_device s3c_device_pcm = {
-	.name		  = "s3c24xx-pcm-audio",
+	.name		  = "samsung-audio",
 	.id		  = -1,
 	.dev              = {
 		.dma_mask = &s3c_device_audio_dmamask,
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 2f91057..4bf0b39 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -264,7 +264,7 @@ EXPORT_SYMBOL(s3c_device_iis);
 static u64 s3c_device_audio_dmamask = 0xffffffffUL;
 
 struct platform_device s3c_device_pcm = {
-	.name		  = "s3c24xx-pcm-audio",
+	.name		  = "samsung-audio",
 	.id		  = -1,
 	.dev              = {
 		.dma_mask = &s3c_device_audio_dmamask,
diff --git a/sound/soc/s3c24xx/goni_wm8994.c b/sound/soc/s3c24xx/goni_wm8994.c
index ef22f14..c568f69 100644
--- a/sound/soc/s3c24xx/goni_wm8994.c
+++ b/sound/soc/s3c24xx/goni_wm8994.c
@@ -251,7 +251,7 @@ static struct snd_soc_dai_link goni_dai[] = {
 	.stream_name = "WM8994 HiFi",
 	.cpu_dai_name = "s3c64xx-i2s-v4",
 	.codec_dai_name = "wm8994-hifi",
-	.platform_name = "s3c24xx-pcm-audio",
+	.platform_name = "samsung-audio",
 	.codec_name = "wm8994-codec.0-0x1a",
 	.init = goni_wm8994_init,
 	.ops = &goni_hifi_ops,
@@ -260,7 +260,7 @@ static struct snd_soc_dai_link goni_dai[] = {
 	.stream_name = "Voice",
 	.cpu_dai_name = "goni-voice-dai",
 	.codec_dai_name = "wm8994-voice",
-	.platform_name = "s3c24xx-pcm-audio",
+	.platform_name = "samsung-audio",
 	.codec_name = "wm8994-codec.0-0x1a",
 	.ops = &goni_voice_ops,
 },
diff --git a/sound/soc/s3c24xx/jive_wm8750.c b/sound/soc/s3c24xx/jive_wm8750.c
index 49605cd..7a6b0fa 100644
--- a/sound/soc/s3c24xx/jive_wm8750.c
+++ b/sound/soc/s3c24xx/jive_wm8750.c
@@ -141,7 +141,7 @@ static struct snd_soc_dai_link jive_dai = {
 	.stream_name	= "WM8750",
 	.cpu_dai_name	= "s3c2412-i2s",
 	.codec_dai_name = "wm8750-hifi",
-	.platform_name	= "s3c24xx-pcm-audio",
+	.platform_name	= "samsung-audio",
 	.codec_name	= "wm8750-codec.0-0x1a",
 	.init		= jive_wm8750_init,
 	.ops		= &jive_ops,
diff --git a/sound/soc/s3c24xx/ln2440sbc_alc650.c b/sound/soc/s3c24xx/ln2440sbc_alc650.c
index abe64ab..6b7bb38 100644
--- a/sound/soc/s3c24xx/ln2440sbc_alc650.c
+++ b/sound/soc/s3c24xx/ln2440sbc_alc650.c
@@ -35,7 +35,7 @@ static struct snd_soc_dai_link ln2440sbc_dai[] = {
 	.cpu_dai_name = "s3c-ac97",
 	.codec_dai_name = "ac97-hifi",
 	.codec_name = "ac97-codec",
-	.platform_name = "s3c24xx-pcm-audio",
+	.platform_name = "samsung-audio",
 },
 };
 
diff --git a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
index c457bfd..a9a4bbb 100644
--- a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
@@ -400,7 +400,7 @@ static struct snd_soc_dai_link neo1973_gta02_dai[] = {
 	.cpu_dai_name = "s3c24xx-i2s",
 	.codec_dai_name = "wm8753-hifi",
 	.init = neo1973_gta02_wm8753_init,
-	.platform_name = "s3c24xx-pcm-audio",
+	.platform_name = "samsung-audio",
 	.codec_name = "wm8753-codec.0-0x1a",
 	.ops = &neo1973_gta02_hifi_ops,
 },
@@ -411,7 +411,7 @@ static struct snd_soc_dai_link neo1973_gta02_dai[] = {
 	.codec_dai_name = "wm8753-voice",
 	.ops = &neo1973_gta02_voice_ops,
 	.codec_name = "wm8753-codec.0-0x1a",
-	.platform_name = "s3c24xx-pcm-audio",
+	.platform_name = "samsung-audio",
 },
 };
 
diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c
index d7a39a0..d5e4148 100644
--- a/sound/soc/s3c24xx/neo1973_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_wm8753.c
@@ -556,7 +556,7 @@ static struct snd_soc_dai_link neo1973_dai[] = {
 { /* Hifi Playback - for similatious use with voice below */
 	.name = "WM8753",
 	.stream_name = "WM8753 HiFi",
-	.platform_name = "s3c24xx-pcm-audio",
+	.platform_name = "samsung-audio",
 	.cpu_dai_name = "s3c24xx-i2s",
 	.codec_dai_name = "wm8753-hifi",
 	.codec_name = "wm8753-codec.0-0x1a",
@@ -566,7 +566,7 @@ static struct snd_soc_dai_link neo1973_dai[] = {
 { /* Voice via BT */
 	.name = "Bluetooth",
 	.stream_name = "Voice",
-	.platform_name = "s3c24xx-pcm-audio",
+	.platform_name = "samsung-audio",
 	.cpu_dai_name = "bluetooth-dai",
 	.codec_dai_name = "wm8753-voice",
 	.codec_name = "wm8753-codec.0-0x1a",
diff --git a/sound/soc/s3c24xx/rx1950_uda1380.c b/sound/soc/s3c24xx/rx1950_uda1380.c
index ffd5cf2..99bb86e 100644
--- a/sound/soc/s3c24xx/rx1950_uda1380.c
+++ b/sound/soc/s3c24xx/rx1950_uda1380.c
@@ -96,7 +96,7 @@ static struct snd_soc_dai_link rx1950_uda1380_dai[] = {
 		.cpu_dai_name	= "s3c24xx-iis",
 		.codec_dai_name	= "uda1380-hifi",
 		.init		= rx1950_uda1380_init,
-		.platform_name	= "s3c24xx-pcm-audio",
+		.platform_name	= "samsung-audio",
 		.codec_name	= "uda1380-codec.0-001a",
 		.ops		= &rx1950_ops,
 	},
diff --git a/sound/soc/s3c24xx/s3c-dma.c b/sound/soc/s3c24xx/s3c-dma.c
index 54bff83..0c1cd6c 100644
--- a/sound/soc/s3c24xx/s3c-dma.c
+++ b/sound/soc/s3c24xx/s3c-dma.c
@@ -477,7 +477,7 @@ static int __devexit s3c24xx_soc_platform_remove(struct platform_device *pdev)
 
 static struct platform_driver s3c24xx_pcm_driver = {
 	.driver = {
-		.name = "s3c24xx-pcm-audio",
+		.name = "samsung-audio",
 		.owner = THIS_MODULE,
 	},
 
@@ -500,4 +500,4 @@ module_exit(snd_s3c24xx_pcm_exit);
 MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
 MODULE_DESCRIPTION("Samsung S3C Audio DMA module");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:s3c24xx-pcm-audio");
+MODULE_ALIAS("platform:samsung-audio");
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c b/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
index f884537..5180c2a 100644
--- a/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
+++ b/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
@@ -99,7 +99,7 @@ static struct snd_soc_dai_link simtec_dai_aic33 = {
 	.codec_name	= "tlv320aic3x-codec.0-0x1a",
 	.cpu_dai_name	= "s3c24xx-i2s",
 	.codec_dai_name = "tlv320aic3x-hifi",
-	.platform_name	= "s3c24xx-pcm-audio",
+	.platform_name	= "samsung-audio",
 	.init		= simtec_hermes_init,
 };
 
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c b/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
index c096759..7a7bb53 100644
--- a/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
+++ b/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
@@ -88,7 +88,7 @@ static struct snd_soc_dai_link simtec_dai_aic23 = {
 	.codec_name	= "tlv320aic3x-codec.0-0x1a",
 	.cpu_dai_name	= "s3c24xx-i2s",
 	.codec_dai_name = "tlv320aic3x-hifi",
-	.platform_name	= "s3c24xx-pcm-audio",
+	.platform_name	= "samsung-audio",
 	.init		= simtec_tlv320aic23_init,
 };
 
diff --git a/sound/soc/s3c24xx/s3c24xx_uda134x.c b/sound/soc/s3c24xx/s3c24xx_uda134x.c
index bd48ffb..50d44fa 100644
--- a/sound/soc/s3c24xx/s3c24xx_uda134x.c
+++ b/sound/soc/s3c24xx/s3c24xx_uda134x.c
@@ -231,7 +231,7 @@ static struct snd_soc_dai_link s3c24xx_uda134x_dai_link = {
 	.codec_dai_name = "uda134x-hifi",
 	.cpu_dai_name = "s3c24xx-i2s",
 	.ops = &s3c24xx_uda134x_ops,
-	.platform_name	= "s3c24xx-pcm-audio",
+	.platform_name	= "samsung-audio",
 };
 
 static struct snd_soc_card snd_soc_s3c24xx_uda134x = {
diff --git a/sound/soc/s3c24xx/smartq_wm8987.c b/sound/soc/s3c24xx/smartq_wm8987.c
index dd20ca7..863631a 100644
--- a/sound/soc/s3c24xx/smartq_wm8987.c
+++ b/sound/soc/s3c24xx/smartq_wm8987.c
@@ -213,7 +213,7 @@ static struct snd_soc_dai_link smartq_dai[] = {
 		.stream_name	= "SmartQ Hi-Fi",
 		.cpu_dai_name	= "s3c64xx-i2s.0",
 		.codec_dai_name	= "wm8750-hifi",
-		.platform_name	= "s3c24xx-pcm-audio",
+		.platform_name	= "samsung-audio",
 		.codec_name	= "wm8750-codec.0-0x1a",
 		.init		= smartq_wm8987_init,
 		.ops		= &smartq_hifi_ops,
diff --git a/sound/soc/s3c24xx/smdk2443_wm9710.c b/sound/soc/s3c24xx/smdk2443_wm9710.c
index 4613288..911bb60 100644
--- a/sound/soc/s3c24xx/smdk2443_wm9710.c
+++ b/sound/soc/s3c24xx/smdk2443_wm9710.c
@@ -31,7 +31,7 @@ static struct snd_soc_dai_link smdk2443_dai[] = {
 	.cpu_dai_name = "s3c-ac97",
 	.codec_dai_name = "ac97-hifi",
 	.codec_name = "ac97-codec",
-	.platform_name = "s3c24xx-pcm-audio",
+	.platform_name = "samsung-audio",
 },
 };
 
diff --git a/sound/soc/s3c24xx/smdk64xx_wm8580.c b/sound/soc/s3c24xx/smdk64xx_wm8580.c
index 052e499..7e75c8d 100644
--- a/sound/soc/s3c24xx/smdk64xx_wm8580.c
+++ b/sound/soc/s3c24xx/smdk64xx_wm8580.c
@@ -224,7 +224,7 @@ static struct snd_soc_dai_link smdk64xx_dai[] = {
 	.stream_name = "Playback",
 	.cpu_dai_name = "s3c64xx-iis-v4",
 	.codec_dai_name = "wm8580-hifi-playback",
-	.platform_name = "s3c24xx-pcm-audio",
+	.platform_name = "samsung-audio",
 	.codec_name = "wm8580-codec.0-001b",
 	.init = smdk64xx_wm8580_init_paifrx,
 	.ops = &smdk64xx_ops,
@@ -234,7 +234,7 @@ static struct snd_soc_dai_link smdk64xx_dai[] = {
 	.stream_name = "Capture",
 	.cpu_dai_name = "s3c64xx-iis-v4",
 	.codec_dai_name = "wm8580-hifi-capture",
-	.platform_name = "s3c24xx-pcm-audio",
+	.platform_name = "samsung-audio",
 	.codec_name = "wm8580-codec.0-001b",
 	.init = smdk64xx_wm8580_init_paiftx,
 	.ops = &smdk64xx_ops,
diff --git a/sound/soc/s3c24xx/smdk_spdif.c b/sound/soc/s3c24xx/smdk_spdif.c
index f31d22a..082b88d 100644
--- a/sound/soc/s3c24xx/smdk_spdif.c
+++ b/sound/soc/s3c24xx/smdk_spdif.c
@@ -157,7 +157,7 @@ static struct snd_soc_card smdk;
 static struct snd_soc_dai_link smdk_dai = {
 	.name = "S/PDIF",
 	.stream_name = "S/PDIF PCM Playback",
-	.platform_name = "s3c24xx-pcm-audio",
+	.platform_name = "samsung-audio",
 	.cpu_dai_name = "samsung-spdif",
 	.codec_dai_name = "dit-hifi",
 	.codec_name = "spdif-dit",
diff --git a/sound/soc/s3c24xx/smdk_wm9713.c b/sound/soc/s3c24xx/smdk_wm9713.c
index 33ba8fd..ea96a51 100644
--- a/sound/soc/s3c24xx/smdk_wm9713.c
+++ b/sound/soc/s3c24xx/smdk_wm9713.c
@@ -45,7 +45,7 @@ static struct snd_soc_card smdk;
 static struct snd_soc_dai_link smdk_dai = {
 	.name = "AC97",
 	.stream_name = "AC97 PCM",
-	.platform_name = "s3c24xx-pcm-audio",
+	.platform_name = "samsung-audio",
 	.cpu_dai_name = "s3c-ac97",
 	.codec_dai_name = "wm9713-hifi",
 	.codec_name = "wm9713-codec",
-- 
1.6.2.5

[PATCH 04/25] ARM: Samsung: Define common audio-dma device

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

The ASoC uses common DMA driver for Audio devices. So it makes
sense to a common audio-dma device shared across all platforms.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 arch/arm/mach-s3c64xx/dev-audio.c         |   13 -------------
 arch/arm/mach-s3c64xx/mach-smdk6410.c     |    2 +-
 arch/arm/plat-s3c24xx/devs.c              |   15 ---------------
 arch/arm/plat-samsung/Makefile            |    1 +
 arch/arm/plat-samsung/dev-asocdma.c       |   24 ++++++++++++++++++++++++
 arch/arm/plat-samsung/include/plat/devs.h |    2 +-
 6 files changed, 27 insertions(+), 30 deletions(-)
 create mode 100644 arch/arm/plat-samsung/dev-asocdma.c

diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index c45cc37..c730dd2 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -336,16 +336,3 @@ void __init s3c64xx_ac97_setup_gpio(int num)
 	else
 		s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpe;
 }
-
-static u64 s3c_device_audio_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_pcm = {
-	.name		  = "samsung-audio",
-	.id		  = -1,
-	.dev              = {
-		.dma_mask = &s3c_device_audio_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-EXPORT_SYMBOL(s3c_device_pcm);
-
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index ecbddd3..e2b18b8 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -283,7 +283,7 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_fb,
 	&s3c_device_ohci,
 	&s3c_device_usb_hsotg,
-	&s3c_device_pcm,
+	&samsung_asoc_dma,
 	&s3c64xx_device_iisv4,
 	&samsung_device_keypad,
 
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 4bf0b39..d8fb4e6 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -259,21 +259,6 @@ struct platform_device s3c_device_iis = {
 
 EXPORT_SYMBOL(s3c_device_iis);
 
-/* ASoC PCM DMA */
-
-static u64 s3c_device_audio_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_pcm = {
-	.name		  = "samsung-audio",
-	.id		  = -1,
-	.dev              = {
-		.dma_mask = &s3c_device_audio_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-EXPORT_SYMBOL(s3c_device_pcm);
-
 /* RTC */
 
 static struct resource s3c_rtc_resource[] = {
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 4d8ff92..b97623a 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -17,6 +17,7 @@ obj-y				+= clock.o
 obj-y				+= pwm-clock.o
 obj-y				+= gpio.o
 obj-y				+= gpio-config.o
+obj-y				+= dev-asocdma.o
 
 obj-$(CONFIG_SAMSUNG_GPIOLIB_4BIT)	+= gpiolib.o
 obj-$(CONFIG_SAMSUNG_CLKSRC)	+= clock-clksrc.o
diff --git a/arch/arm/plat-samsung/dev-asocdma.c b/arch/arm/plat-samsung/dev-asocdma.c
new file mode 100644
index 0000000..b7b1fca
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-asocdma.c
@@ -0,0 +1,24 @@
+/* linux/arch/arm/plat-samsung/dev-asocdma.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+static u64 audio_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device samsung_asoc_dma = {
+	.name		  = "samsung-audio",
+	.id		  = -1,
+	.dev              = {
+		.dma_mask = &audio_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	}
+};
+EXPORT_SYMBOL(samsung_asoc_dma);
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index a9fecd6..21dfa68 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -32,7 +32,7 @@ extern struct platform_device s3c64xx_device_iisv4;
 extern struct platform_device s3c64xx_device_spi0;
 extern struct platform_device s3c64xx_device_spi1;
 
-extern struct platform_device s3c_device_pcm;
+extern struct platform_device samsung_asoc_dma;
 
 extern struct platform_device s3c64xx_device_pcm0;
 extern struct platform_device s3c64xx_device_pcm1;
-- 
1.6.2.5

Re: [PATCH 04/25] ARM: Samsung: Define common audio-dma device

[Vasily khoruzhick]

[-- Attachment #1.1: Type: text/plain, Size: 5095 bytes --]

On Tue, 19 Oct 2010 16:05:40 +0900
Jassi Brar <jassisinghbrar@gmail.com> wrote:

> From: Jassi Brar <jassi.brar@samsung.com>
> 
> The ASoC uses common DMA driver for Audio devices. So it makes
> sense to a common audio-dma device shared across all platforms.
> 
> Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
> ---
>  arch/arm/mach-s3c64xx/dev-audio.c         |   13 -------------
>  arch/arm/mach-s3c64xx/mach-smdk6410.c     |    2 +-
>  arch/arm/plat-s3c24xx/devs.c              |   15 ---------------
>  arch/arm/plat-samsung/Makefile            |    1 +
>  arch/arm/plat-samsung/dev-asocdma.c       |   24 ++++++++++++++++++++++++
>  arch/arm/plat-samsung/include/plat/devs.h |    2 +-
>  6 files changed, 27 insertions(+), 30 deletions(-)
>  create mode 100644 arch/arm/plat-samsung/dev-asocdma.c
> 
> diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
> index c45cc37..c730dd2 100644
> --- a/arch/arm/mach-s3c64xx/dev-audio.c
> +++ b/arch/arm/mach-s3c64xx/dev-audio.c
> @@ -336,16 +336,3 @@ void __init s3c64xx_ac97_setup_gpio(int num)
>  	else
>  		s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpe;
>  }
> -
> -static u64 s3c_device_audio_dmamask = 0xffffffffUL;
> -
> -struct platform_device s3c_device_pcm = {
> -	.name		  = "samsung-audio",
> -	.id		  = -1,
> -	.dev              = {
> -		.dma_mask = &s3c_device_audio_dmamask,
> -		.coherent_dma_mask = 0xffffffffUL
> -	}
> -};
> -EXPORT_SYMBOL(s3c_device_pcm);
> -
> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
> index ecbddd3..e2b18b8 100644
> --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
> +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
> @@ -283,7 +283,7 @@ static struct platform_device *smdk6410_devices[] __initdata = {
>  	&s3c_device_fb,
>  	&s3c_device_ohci,
>  	&s3c_device_usb_hsotg,
> -	&s3c_device_pcm,
> +	&samsung_asoc_dma,
>  	&s3c64xx_device_iisv4,
>  	&samsung_device_keypad,
>  
> diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
> index 4bf0b39..d8fb4e6 100644
> --- a/arch/arm/plat-s3c24xx/devs.c
> +++ b/arch/arm/plat-s3c24xx/devs.c
> @@ -259,21 +259,6 @@ struct platform_device s3c_device_iis = {
>  
>  EXPORT_SYMBOL(s3c_device_iis);
>  
> -/* ASoC PCM DMA */
> -
> -static u64 s3c_device_audio_dmamask = 0xffffffffUL;
> -
> -struct platform_device s3c_device_pcm = {
> -	.name		  = "samsung-audio",
> -	.id		  = -1,
> -	.dev              = {
> -		.dma_mask = &s3c_device_audio_dmamask,
> -		.coherent_dma_mask = 0xffffffffUL
> -	}
> -};
> -
> -EXPORT_SYMBOL(s3c_device_pcm);
> -
>  /* RTC */
>  
>  static struct resource s3c_rtc_resource[] = {
> diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
> index 4d8ff92..b97623a 100644
> --- a/arch/arm/plat-samsung/Makefile
> +++ b/arch/arm/plat-samsung/Makefile
> @@ -17,6 +17,7 @@ obj-y				+= clock.o
>  obj-y				+= pwm-clock.o
>  obj-y				+= gpio.o
>  obj-y				+= gpio-config.o
> +obj-y				+= dev-asocdma.o
>  
>  obj-$(CONFIG_SAMSUNG_GPIOLIB_4BIT)	+= gpiolib.o
>  obj-$(CONFIG_SAMSUNG_CLKSRC)	+= clock-clksrc.o
> diff --git a/arch/arm/plat-samsung/dev-asocdma.c b/arch/arm/plat-samsung/dev-asocdma.c
> new file mode 100644
> index 0000000..b7b1fca
> --- /dev/null
> +++ b/arch/arm/plat-samsung/dev-asocdma.c
> @@ -0,0 +1,24 @@
> +/* linux/arch/arm/plat-samsung/dev-asocdma.c
> + *
> + * Copyright (c) 2010 Samsung Electronics Co. Ltd
> + *	Jaswinder Singh <jassi.brar@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/platform_device.h>
> +#include <linux/dma-mapping.h>
> +
> +static u64 audio_dmamask = DMA_BIT_MASK(32);
> +
> +struct platform_device samsung_asoc_dma = {
> +	.name		  = "samsung-audio",
> +	.id		  = -1,
> +	.dev              = {
> +		.dma_mask = &audio_dmamask,
> +		.coherent_dma_mask = DMA_BIT_MASK(32),
> +	}
> +};
> +EXPORT_SYMBOL(samsung_asoc_dma);
> diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
> index a9fecd6..21dfa68 100644
> --- a/arch/arm/plat-samsung/include/plat/devs.h
> +++ b/arch/arm/plat-samsung/include/plat/devs.h
> @@ -32,7 +32,7 @@ extern struct platform_device s3c64xx_device_iisv4;
>  extern struct platform_device s3c64xx_device_spi0;
>  extern struct platform_device s3c64xx_device_spi1;
>  
> -extern struct platform_device s3c_device_pcm;
> +extern struct platform_device samsung_asoc_dma;
>  
>  extern struct platform_device s3c64xx_device_pcm0;
>  extern struct platform_device s3c64xx_device_pcm1;
> -- 
> 1.6.2.5

This patch will definitely break my changes to mach-rx1950.c and
mach-h1940.c in Ben's tree, it just will not compile. However
fix is trivial, I'll send patch to Ben as soon as your changes will be
merged.

Sent this mail just as reminder for myself :)

Regards
Vasily

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[PATCH 05/25] ASoC: Samsung: Rename ASoC DMA driver

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Rename Samsung ASoC DMA driver
	s3c-dma.[c/h] -> dma.[c/h]

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 sound/soc/s3c24xx/Makefile                     |    2 +-
 sound/soc/s3c24xx/dma.c                        |  503 ++++++++++++++++++++++++
 sound/soc/s3c24xx/dma.h                        |   30 ++
 sound/soc/s3c24xx/goni_wm8994.c                |    2 +-
 sound/soc/s3c24xx/jive_wm8750.c                |    2 +-
 sound/soc/s3c24xx/ln2440sbc_alc650.c           |    2 +-
 sound/soc/s3c24xx/neo1973_gta02_wm8753.c       |    2 +-
 sound/soc/s3c24xx/neo1973_wm8753.c             |    2 +-
 sound/soc/s3c24xx/rx1950_uda1380.c             |    2 +-
 sound/soc/s3c24xx/s3c-ac97.c                   |    2 +-
 sound/soc/s3c24xx/s3c-dma.c                    |  503 ------------------------
 sound/soc/s3c24xx/s3c-dma.h                    |   30 --
 sound/soc/s3c24xx/s3c-i2s-v2.c                 |    2 +-
 sound/soc/s3c24xx/s3c-pcm.c                    |    2 +-
 sound/soc/s3c24xx/s3c2412-i2s.c                |    2 +-
 sound/soc/s3c24xx/s3c24xx-i2s.c                |    2 +-
 sound/soc/s3c24xx/s3c24xx_simtec.c             |    2 +-
 sound/soc/s3c24xx/s3c24xx_simtec_hermes.c      |    2 +-
 sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c |    2 +-
 sound/soc/s3c24xx/s3c24xx_uda134x.c            |    2 +-
 sound/soc/s3c24xx/s3c64xx-i2s-v4.c             |    2 +-
 sound/soc/s3c24xx/s3c64xx-i2s.c                |    2 +-
 sound/soc/s3c24xx/smartq_wm8987.c              |    2 +-
 sound/soc/s3c24xx/smdk2443_wm9710.c            |    2 +-
 sound/soc/s3c24xx/smdk64xx_wm8580.c            |    2 +-
 sound/soc/s3c24xx/smdk_spdif.c                 |    2 +-
 sound/soc/s3c24xx/smdk_wm9713.c                |    2 +-
 sound/soc/s3c24xx/spdif.c                      |    2 +-
 28 files changed, 557 insertions(+), 557 deletions(-)
 create mode 100644 sound/soc/s3c24xx/dma.c
 create mode 100644 sound/soc/s3c24xx/dma.h
 delete mode 100644 sound/soc/s3c24xx/s3c-dma.c
 delete mode 100644 sound/soc/s3c24xx/s3c-dma.h

diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile
index 4e232f1..20aac45 100644
--- a/sound/soc/s3c24xx/Makefile
+++ b/sound/soc/s3c24xx/Makefile
@@ -1,5 +1,5 @@
 # S3c24XX Platform Support
-snd-soc-s3c24xx-objs := s3c-dma.o
+snd-soc-s3c24xx-objs := dma.o
 snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o
 snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o
 snd-soc-s3c64xx-i2s-objs := s3c64xx-i2s.o
diff --git a/sound/soc/s3c24xx/dma.c b/sound/soc/s3c24xx/dma.c
new file mode 100644
index 0000000..b4c7c85
--- /dev/null
+++ b/sound/soc/s3c24xx/dma.c
@@ -0,0 +1,503 @@
+/*
+ * dma.c  --  ALSA Soc Audio Layer
+ *
+ * (c) 2006 Wolfson Microelectronics PLC.
+ * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ * Copyright 2004-2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <asm/dma.h>
+#include <mach/hardware.h>
+#include <mach/dma.h>
+
+#include "dma.h"
+
+static const struct snd_pcm_hardware s3c_dma_hardware = {
+	.info			= SNDRV_PCM_INFO_INTERLEAVED |
+				    SNDRV_PCM_INFO_BLOCK_TRANSFER |
+				    SNDRV_PCM_INFO_MMAP |
+				    SNDRV_PCM_INFO_MMAP_VALID |
+				    SNDRV_PCM_INFO_PAUSE |
+				    SNDRV_PCM_INFO_RESUME,
+	.formats		= SNDRV_PCM_FMTBIT_S16_LE |
+				    SNDRV_PCM_FMTBIT_U16_LE |
+				    SNDRV_PCM_FMTBIT_U8 |
+				    SNDRV_PCM_FMTBIT_S8,
+	.channels_min		= 2,
+	.channels_max		= 2,
+	.buffer_bytes_max	= 128*1024,
+	.period_bytes_min	= PAGE_SIZE,
+	.period_bytes_max	= PAGE_SIZE*2,
+	.periods_min		= 2,
+	.periods_max		= 128,
+	.fifo_size		= 32,
+};
+
+struct s3c24xx_runtime_data {
+	spinlock_t lock;
+	int state;
+	unsigned int dma_loaded;
+	unsigned int dma_limit;
+	unsigned int dma_period;
+	dma_addr_t dma_start;
+	dma_addr_t dma_pos;
+	dma_addr_t dma_end;
+	struct s3c_dma_params *params;
+};
+
+/* s3c_dma_enqueue
+ *
+ * place a dma buffer onto the queue for the dma system
+ * to handle.
+*/
+static void s3c_dma_enqueue(struct snd_pcm_substream *substream)
+{
+	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
+	dma_addr_t pos = prtd->dma_pos;
+	unsigned int limit;
+	int ret;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (s3c_dma_has_circular())
+		limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
+	else
+		limit = prtd->dma_limit;
+
+	pr_debug("%s: loaded %d, limit %d\n",
+				__func__, prtd->dma_loaded, limit);
+
+	while (prtd->dma_loaded < limit) {
+		unsigned long len = prtd->dma_period;
+
+		pr_debug("dma_loaded: %d\n", prtd->dma_loaded);
+
+		if ((pos + len) > prtd->dma_end) {
+			len  = prtd->dma_end - pos;
+			pr_debug(KERN_DEBUG "%s: corrected dma len %ld\n",
+			       __func__, len);
+		}
+
+		ret = s3c2410_dma_enqueue(prtd->params->channel,
+			substream, pos, len);
+
+		if (ret == 0) {
+			prtd->dma_loaded++;
+			pos += prtd->dma_period;
+			if (pos >= prtd->dma_end)
+				pos = prtd->dma_start;
+		} else
+			break;
+	}
+
+	prtd->dma_pos = pos;
+}
+
+static void s3c24xx_audio_buffdone(struct s3c2410_dma_chan *channel,
+				void *dev_id, int size,
+				enum s3c2410_dma_buffresult result)
+{
+	struct snd_pcm_substream *substream = dev_id;
+	struct s3c24xx_runtime_data *prtd;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (result == S3C2410_RES_ABORT || result == S3C2410_RES_ERR)
+		return;
+
+	prtd = substream->runtime->private_data;
+
+	if (substream)
+		snd_pcm_period_elapsed(substream);
+
+	spin_lock(&prtd->lock);
+	if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) {
+		prtd->dma_loaded--;
+		s3c_dma_enqueue(substream);
+	}
+
+	spin_unlock(&prtd->lock);
+}
+
+static int s3c_dma_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct s3c24xx_runtime_data *prtd = runtime->private_data;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	unsigned long totbytes = params_buffer_bytes(params);
+	struct s3c_dma_params *dma =
+		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	int ret = 0;
+
+
+	pr_debug("Entered %s\n", __func__);
+
+	/* return if this is a bufferless transfer e.g.
+	 * codec <--> BT codec or GSM modem -- lg FIXME */
+	if (!dma)
+		return 0;
+
+	/* this may get called several times by oss emulation
+	 * with different params -HW */
+	if (prtd->params == NULL) {
+		/* prepare DMA */
+		prtd->params = dma;
+
+		pr_debug("params %p, client %p, channel %d\n", prtd->params,
+			prtd->params->client, prtd->params->channel);
+
+		ret = s3c2410_dma_request(prtd->params->channel,
+					  prtd->params->client, NULL);
+
+		if (ret < 0) {
+			printk(KERN_ERR "failed to get dma channel\n");
+			return ret;
+		}
+
+		/* use the circular buffering if we have it available. */
+		if (s3c_dma_has_circular())
+			s3c2410_dma_setflags(prtd->params->channel,
+					     S3C2410_DMAF_CIRCULAR);
+	}
+
+	s3c2410_dma_set_buffdone_fn(prtd->params->channel,
+				    s3c24xx_audio_buffdone);
+
+	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+
+	runtime->dma_bytes = totbytes;
+
+	spin_lock_irq(&prtd->lock);
+	prtd->dma_loaded = 0;
+	prtd->dma_limit = runtime->hw.periods_min;
+	prtd->dma_period = params_period_bytes(params);
+	prtd->dma_start = runtime->dma_addr;
+	prtd->dma_pos = prtd->dma_start;
+	prtd->dma_end = prtd->dma_start + totbytes;
+	spin_unlock_irq(&prtd->lock);
+
+	return 0;
+}
+
+static int s3c_dma_hw_free(struct snd_pcm_substream *substream)
+{
+	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
+
+	pr_debug("Entered %s\n", __func__);
+
+	/* TODO - do we need to ensure DMA flushed */
+	snd_pcm_set_runtime_buffer(substream, NULL);
+
+	if (prtd->params) {
+		s3c2410_dma_free(prtd->params->channel, prtd->params->client);
+		prtd->params = NULL;
+	}
+
+	return 0;
+}
+
+static int s3c_dma_prepare(struct snd_pcm_substream *substream)
+{
+	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
+	int ret = 0;
+
+	pr_debug("Entered %s\n", __func__);
+
+	/* return if this is a bufferless transfer e.g.
+	 * codec <--> BT codec or GSM modem -- lg FIXME */
+	if (!prtd->params)
+		return 0;
+
+	/* channel needs configuring for mem=>device, increment memory addr,
+	 * sync to pclk, half-word transfers to the IIS-FIFO. */
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		s3c2410_dma_devconfig(prtd->params->channel,
+				      S3C2410_DMASRC_MEM,
+				      prtd->params->dma_addr);
+	} else {
+		s3c2410_dma_devconfig(prtd->params->channel,
+				      S3C2410_DMASRC_HW,
+				      prtd->params->dma_addr);
+	}
+
+	s3c2410_dma_config(prtd->params->channel,
+			   prtd->params->dma_size);
+
+	/* flush the DMA channel */
+	s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
+	prtd->dma_loaded = 0;
+	prtd->dma_pos = prtd->dma_start;
+
+	/* enqueue dma buffers */
+	s3c_dma_enqueue(substream);
+
+	return ret;
+}
+
+static int s3c_dma_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
+	int ret = 0;
+
+	pr_debug("Entered %s\n", __func__);
+
+	spin_lock(&prtd->lock);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		prtd->state |= ST_RUNNING;
+		s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_START);
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		prtd->state &= ~ST_RUNNING;
+		s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STOP);
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock(&prtd->lock);
+
+	return ret;
+}
+
+static snd_pcm_uframes_t
+s3c_dma_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct s3c24xx_runtime_data *prtd = runtime->private_data;
+	unsigned long res;
+	dma_addr_t src, dst;
+
+	pr_debug("Entered %s\n", __func__);
+
+	spin_lock(&prtd->lock);
+	s3c2410_dma_getposition(prtd->params->channel, &src, &dst);
+
+	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+		res = dst - prtd->dma_start;
+	else
+		res = src - prtd->dma_start;
+
+	spin_unlock(&prtd->lock);
+
+	pr_debug("Pointer %x %x\n", src, dst);
+
+	/* we seem to be getting the odd error from the pcm library due
+	 * to out-of-bounds pointers. this is maybe due to the dma engine
+	 * not having loaded the new values for the channel before being
+	 * callled... (todo - fix )
+	 */
+
+	if (res >= snd_pcm_lib_buffer_bytes(substream)) {
+		if (res == snd_pcm_lib_buffer_bytes(substream))
+			res = 0;
+	}
+
+	return bytes_to_frames(substream->runtime, res);
+}
+
+static int s3c_dma_open(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct s3c24xx_runtime_data *prtd;
+
+	pr_debug("Entered %s\n", __func__);
+
+	snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
+	snd_soc_set_runtime_hwparams(substream, &s3c_dma_hardware);
+
+	prtd = kzalloc(sizeof(struct s3c24xx_runtime_data), GFP_KERNEL);
+	if (prtd == NULL)
+		return -ENOMEM;
+
+	spin_lock_init(&prtd->lock);
+
+	runtime->private_data = prtd;
+	return 0;
+}
+
+static int s3c_dma_close(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct s3c24xx_runtime_data *prtd = runtime->private_data;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (!prtd)
+		pr_debug("s3c_dma_close called with prtd == NULL\n");
+
+	kfree(prtd);
+
+	return 0;
+}
+
+static int s3c_dma_mmap(struct snd_pcm_substream *substream,
+	struct vm_area_struct *vma)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	pr_debug("Entered %s\n", __func__);
+
+	return dma_mmap_writecombine(substream->pcm->card->dev, vma,
+				     runtime->dma_area,
+				     runtime->dma_addr,
+				     runtime->dma_bytes);
+}
+
+static struct snd_pcm_ops s3c_dma_ops = {
+	.open		= s3c_dma_open,
+	.close		= s3c_dma_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= s3c_dma_hw_params,
+	.hw_free	= s3c_dma_hw_free,
+	.prepare	= s3c_dma_prepare,
+	.trigger	= s3c_dma_trigger,
+	.pointer	= s3c_dma_pointer,
+	.mmap		= s3c_dma_mmap,
+};
+
+static int s3c_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+{
+	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+	struct snd_dma_buffer *buf = &substream->dma_buffer;
+	size_t size = s3c_dma_hardware.buffer_bytes_max;
+
+	pr_debug("Entered %s\n", __func__);
+
+	buf->dev.type = SNDRV_DMA_TYPE_DEV;
+	buf->dev.dev = pcm->card->dev;
+	buf->private_data = NULL;
+	buf->area = dma_alloc_writecombine(pcm->card->dev, size,
+					   &buf->addr, GFP_KERNEL);
+	if (!buf->area)
+		return -ENOMEM;
+	buf->bytes = size;
+	return 0;
+}
+
+static void s3c_dma_free_dma_buffers(struct snd_pcm *pcm)
+{
+	struct snd_pcm_substream *substream;
+	struct snd_dma_buffer *buf;
+	int stream;
+
+	pr_debug("Entered %s\n", __func__);
+
+	for (stream = 0; stream < 2; stream++) {
+		substream = pcm->streams[stream].substream;
+		if (!substream)
+			continue;
+
+		buf = &substream->dma_buffer;
+		if (!buf->area)
+			continue;
+
+		dma_free_writecombine(pcm->card->dev, buf->bytes,
+				      buf->area, buf->addr);
+		buf->area = NULL;
+	}
+}
+
+static u64 s3c_dma_mask = DMA_BIT_MASK(32);
+
+static int s3c_dma_new(struct snd_card *card,
+	struct snd_soc_dai *dai, struct snd_pcm *pcm)
+{
+	int ret = 0;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (!card->dev->dma_mask)
+		card->dev->dma_mask = &s3c_dma_mask;
+	if (!card->dev->coherent_dma_mask)
+		card->dev->coherent_dma_mask = 0xffffffff;
+
+	if (dai->driver->playback.channels_min) {
+		ret = s3c_preallocate_dma_buffer(pcm,
+			SNDRV_PCM_STREAM_PLAYBACK);
+		if (ret)
+			goto out;
+	}
+
+	if (dai->driver->capture.channels_min) {
+		ret = s3c_preallocate_dma_buffer(pcm,
+			SNDRV_PCM_STREAM_CAPTURE);
+		if (ret)
+			goto out;
+	}
+out:
+	return ret;
+}
+
+static struct snd_soc_platform_driver s3c24xx_soc_platform = {
+	.ops		= &s3c_dma_ops,
+	.pcm_new	= s3c_dma_new,
+	.pcm_free	= s3c_dma_free_dma_buffers,
+};
+
+static int __devinit s3c24xx_soc_platform_probe(struct platform_device *pdev)
+{
+	return snd_soc_register_platform(&pdev->dev, &s3c24xx_soc_platform);
+}
+
+static int __devexit s3c24xx_soc_platform_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_platform(&pdev->dev);
+	return 0;
+}
+
+static struct platform_driver s3c24xx_pcm_driver = {
+	.driver = {
+		.name = "samsung-audio",
+		.owner = THIS_MODULE,
+	},
+
+	.probe = s3c24xx_soc_platform_probe,
+	.remove = __devexit_p(s3c24xx_soc_platform_remove),
+};
+
+static int __init snd_s3c24xx_pcm_init(void)
+{
+	return platform_driver_register(&s3c24xx_pcm_driver);
+}
+module_init(snd_s3c24xx_pcm_init);
+
+static void __exit snd_s3c24xx_pcm_exit(void)
+{
+	platform_driver_unregister(&s3c24xx_pcm_driver);
+}
+module_exit(snd_s3c24xx_pcm_exit);
+
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("Samsung S3C Audio DMA module");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-audio");
diff --git a/sound/soc/s3c24xx/dma.h b/sound/soc/s3c24xx/dma.h
new file mode 100644
index 0000000..f8cd2b4
--- /dev/null
+++ b/sound/soc/s3c24xx/dma.h
@@ -0,0 +1,30 @@
+/*
+ *  dma.h --
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  ALSA PCM interface for the Samsung S3C24xx CPU
+ */
+
+#ifndef _S3C_AUDIO_H
+#define _S3C_AUDIO_H
+
+#define ST_RUNNING		(1<<0)
+#define ST_OPENED		(1<<1)
+
+struct s3c_dma_params {
+	struct s3c2410_dma_client *client;	/* stream identifier */
+	int channel;				/* Channel ID */
+	dma_addr_t dma_addr;
+	int dma_size;			/* Size of the DMA transfer */
+};
+
+#define S3C24XX_DAI_I2S			0
+
+/* platform data */
+extern struct snd_ac97_bus_ops s3c24xx_ac97_ops;
+
+#endif
diff --git a/sound/soc/s3c24xx/goni_wm8994.c b/sound/soc/s3c24xx/goni_wm8994.c
index c568f69..201056c 100644
--- a/sound/soc/s3c24xx/goni_wm8994.c
+++ b/sound/soc/s3c24xx/goni_wm8994.c
@@ -25,7 +25,7 @@
 #include <linux/mfd/wm8994/core.h>
 #include <linux/mfd/wm8994/registers.h>
 #include "../codecs/wm8994.h"
-#include "s3c-dma.h"
+#include "dma.h"
 #include "s3c64xx-i2s.h"
 
 #define MACHINE_NAME	0
diff --git a/sound/soc/s3c24xx/jive_wm8750.c b/sound/soc/s3c24xx/jive_wm8750.c
index 7a6b0fa..4e1b8ac 100644
--- a/sound/soc/s3c24xx/jive_wm8750.c
+++ b/sound/soc/s3c24xx/jive_wm8750.c
@@ -25,7 +25,7 @@
 
 #include <asm/mach-types.h>
 
-#include "s3c-dma.h"
+#include "dma.h"
 #include "s3c2412-i2s.h"
 
 #include "../codecs/wm8750.h"
diff --git a/sound/soc/s3c24xx/ln2440sbc_alc650.c b/sound/soc/s3c24xx/ln2440sbc_alc650.c
index 6b7bb38..36e7e85 100644
--- a/sound/soc/s3c24xx/ln2440sbc_alc650.c
+++ b/sound/soc/s3c24xx/ln2440sbc_alc650.c
@@ -23,7 +23,7 @@
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 
-#include "s3c-dma.h"
+#include "dma.h"
 #include "s3c-ac97.h"
 
 static struct snd_soc_card ln2440sbc;
diff --git a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
index a9a4bbb..c4b2013 100644
--- a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
@@ -32,7 +32,7 @@
 #include <asm/io.h>
 #include <mach/gta02.h>
 #include "../codecs/wm8753.h"
-#include "s3c-dma.h"
+#include "dma.h"
 #include "s3c24xx-i2s.h"
 
 static struct snd_soc_card neo1973_gta02;
diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c
index d5e4148..96dda57 100644
--- a/sound/soc/s3c24xx/neo1973_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_wm8753.c
@@ -36,7 +36,7 @@
 
 #include "../codecs/wm8753.h"
 #include "lm4857.h"
-#include "s3c-dma.h"
+#include "dma.h"
 #include "s3c24xx-i2s.h"
 
 /* define the scenarios */
diff --git a/sound/soc/s3c24xx/rx1950_uda1380.c b/sound/soc/s3c24xx/rx1950_uda1380.c
index 99bb86e..07197ee 100644
--- a/sound/soc/s3c24xx/rx1950_uda1380.c
+++ b/sound/soc/s3c24xx/rx1950_uda1380.c
@@ -35,7 +35,7 @@
 
 #include <asm/mach-types.h>
 
-#include "s3c-dma.h"
+#include "dma.h"
 #include "s3c24xx-i2s.h"
 #include "../codecs/uda1380.h"
 
diff --git a/sound/soc/s3c24xx/s3c-ac97.c b/sound/soc/s3c24xx/s3c-ac97.c
index f891eb7..408f9c9 100644
--- a/sound/soc/s3c24xx/s3c-ac97.c
+++ b/sound/soc/s3c24xx/s3c-ac97.c
@@ -24,7 +24,7 @@
 #include <mach/dma.h>
 #include <plat/audio.h>
 
-#include "s3c-dma.h"
+#include "dma.h"
 #include "s3c-ac97.h"
 
 #define AC_CMD_ADDR(x) (x << 16)
diff --git a/sound/soc/s3c24xx/s3c-dma.c b/sound/soc/s3c24xx/s3c-dma.c
deleted file mode 100644
index 0c1cd6c..0000000
--- a/sound/soc/s3c24xx/s3c-dma.c
+++ /dev/null
@@ -1,503 +0,0 @@
-/*
- * s3c-dma.c  --  ALSA Soc Audio Layer
- *
- * (c) 2006 Wolfson Microelectronics PLC.
- * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
- *
- * Copyright 2004-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/dma-mapping.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-
-#include <asm/dma.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-
-#include "s3c-dma.h"
-
-static const struct snd_pcm_hardware s3c_dma_hardware = {
-	.info			= SNDRV_PCM_INFO_INTERLEAVED |
-				    SNDRV_PCM_INFO_BLOCK_TRANSFER |
-				    SNDRV_PCM_INFO_MMAP |
-				    SNDRV_PCM_INFO_MMAP_VALID |
-				    SNDRV_PCM_INFO_PAUSE |
-				    SNDRV_PCM_INFO_RESUME,
-	.formats		= SNDRV_PCM_FMTBIT_S16_LE |
-				    SNDRV_PCM_FMTBIT_U16_LE |
-				    SNDRV_PCM_FMTBIT_U8 |
-				    SNDRV_PCM_FMTBIT_S8,
-	.channels_min		= 2,
-	.channels_max		= 2,
-	.buffer_bytes_max	= 128*1024,
-	.period_bytes_min	= PAGE_SIZE,
-	.period_bytes_max	= PAGE_SIZE*2,
-	.periods_min		= 2,
-	.periods_max		= 128,
-	.fifo_size		= 32,
-};
-
-struct s3c24xx_runtime_data {
-	spinlock_t lock;
-	int state;
-	unsigned int dma_loaded;
-	unsigned int dma_limit;
-	unsigned int dma_period;
-	dma_addr_t dma_start;
-	dma_addr_t dma_pos;
-	dma_addr_t dma_end;
-	struct s3c_dma_params *params;
-};
-
-/* s3c_dma_enqueue
- *
- * place a dma buffer onto the queue for the dma system
- * to handle.
-*/
-static void s3c_dma_enqueue(struct snd_pcm_substream *substream)
-{
-	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
-	dma_addr_t pos = prtd->dma_pos;
-	unsigned int limit;
-	int ret;
-
-	pr_debug("Entered %s\n", __func__);
-
-	if (s3c_dma_has_circular())
-		limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
-	else
-		limit = prtd->dma_limit;
-
-	pr_debug("%s: loaded %d, limit %d\n",
-				__func__, prtd->dma_loaded, limit);
-
-	while (prtd->dma_loaded < limit) {
-		unsigned long len = prtd->dma_period;
-
-		pr_debug("dma_loaded: %d\n", prtd->dma_loaded);
-
-		if ((pos + len) > prtd->dma_end) {
-			len  = prtd->dma_end - pos;
-			pr_debug(KERN_DEBUG "%s: corrected dma len %ld\n",
-			       __func__, len);
-		}
-
-		ret = s3c2410_dma_enqueue(prtd->params->channel,
-			substream, pos, len);
-
-		if (ret == 0) {
-			prtd->dma_loaded++;
-			pos += prtd->dma_period;
-			if (pos >= prtd->dma_end)
-				pos = prtd->dma_start;
-		} else
-			break;
-	}
-
-	prtd->dma_pos = pos;
-}
-
-static void s3c24xx_audio_buffdone(struct s3c2410_dma_chan *channel,
-				void *dev_id, int size,
-				enum s3c2410_dma_buffresult result)
-{
-	struct snd_pcm_substream *substream = dev_id;
-	struct s3c24xx_runtime_data *prtd;
-
-	pr_debug("Entered %s\n", __func__);
-
-	if (result == S3C2410_RES_ABORT || result == S3C2410_RES_ERR)
-		return;
-
-	prtd = substream->runtime->private_data;
-
-	if (substream)
-		snd_pcm_period_elapsed(substream);
-
-	spin_lock(&prtd->lock);
-	if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) {
-		prtd->dma_loaded--;
-		s3c_dma_enqueue(substream);
-	}
-
-	spin_unlock(&prtd->lock);
-}
-
-static int s3c_dma_hw_params(struct snd_pcm_substream *substream,
-	struct snd_pcm_hw_params *params)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct s3c24xx_runtime_data *prtd = runtime->private_data;
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	unsigned long totbytes = params_buffer_bytes(params);
-	struct s3c_dma_params *dma =
-		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
-	int ret = 0;
-
-
-	pr_debug("Entered %s\n", __func__);
-
-	/* return if this is a bufferless transfer e.g.
-	 * codec <--> BT codec or GSM modem -- lg FIXME */
-	if (!dma)
-		return 0;
-
-	/* this may get called several times by oss emulation
-	 * with different params -HW */
-	if (prtd->params == NULL) {
-		/* prepare DMA */
-		prtd->params = dma;
-
-		pr_debug("params %p, client %p, channel %d\n", prtd->params,
-			prtd->params->client, prtd->params->channel);
-
-		ret = s3c2410_dma_request(prtd->params->channel,
-					  prtd->params->client, NULL);
-
-		if (ret < 0) {
-			printk(KERN_ERR "failed to get dma channel\n");
-			return ret;
-		}
-
-		/* use the circular buffering if we have it available. */
-		if (s3c_dma_has_circular())
-			s3c2410_dma_setflags(prtd->params->channel,
-					     S3C2410_DMAF_CIRCULAR);
-	}
-
-	s3c2410_dma_set_buffdone_fn(prtd->params->channel,
-				    s3c24xx_audio_buffdone);
-
-	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
-
-	runtime->dma_bytes = totbytes;
-
-	spin_lock_irq(&prtd->lock);
-	prtd->dma_loaded = 0;
-	prtd->dma_limit = runtime->hw.periods_min;
-	prtd->dma_period = params_period_bytes(params);
-	prtd->dma_start = runtime->dma_addr;
-	prtd->dma_pos = prtd->dma_start;
-	prtd->dma_end = prtd->dma_start + totbytes;
-	spin_unlock_irq(&prtd->lock);
-
-	return 0;
-}
-
-static int s3c_dma_hw_free(struct snd_pcm_substream *substream)
-{
-	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
-
-	pr_debug("Entered %s\n", __func__);
-
-	/* TODO - do we need to ensure DMA flushed */
-	snd_pcm_set_runtime_buffer(substream, NULL);
-
-	if (prtd->params) {
-		s3c2410_dma_free(prtd->params->channel, prtd->params->client);
-		prtd->params = NULL;
-	}
-
-	return 0;
-}
-
-static int s3c_dma_prepare(struct snd_pcm_substream *substream)
-{
-	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
-	int ret = 0;
-
-	pr_debug("Entered %s\n", __func__);
-
-	/* return if this is a bufferless transfer e.g.
-	 * codec <--> BT codec or GSM modem -- lg FIXME */
-	if (!prtd->params)
-		return 0;
-
-	/* channel needs configuring for mem=>device, increment memory addr,
-	 * sync to pclk, half-word transfers to the IIS-FIFO. */
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		s3c2410_dma_devconfig(prtd->params->channel,
-				      S3C2410_DMASRC_MEM,
-				      prtd->params->dma_addr);
-	} else {
-		s3c2410_dma_devconfig(prtd->params->channel,
-				      S3C2410_DMASRC_HW,
-				      prtd->params->dma_addr);
-	}
-
-	s3c2410_dma_config(prtd->params->channel,
-			   prtd->params->dma_size);
-
-	/* flush the DMA channel */
-	s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
-	prtd->dma_loaded = 0;
-	prtd->dma_pos = prtd->dma_start;
-
-	/* enqueue dma buffers */
-	s3c_dma_enqueue(substream);
-
-	return ret;
-}
-
-static int s3c_dma_trigger(struct snd_pcm_substream *substream, int cmd)
-{
-	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
-	int ret = 0;
-
-	pr_debug("Entered %s\n", __func__);
-
-	spin_lock(&prtd->lock);
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-	case SNDRV_PCM_TRIGGER_RESUME:
-	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		prtd->state |= ST_RUNNING;
-		s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_START);
-		break;
-
-	case SNDRV_PCM_TRIGGER_STOP:
-	case SNDRV_PCM_TRIGGER_SUSPEND:
-	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		prtd->state &= ~ST_RUNNING;
-		s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STOP);
-		break;
-
-	default:
-		ret = -EINVAL;
-		break;
-	}
-
-	spin_unlock(&prtd->lock);
-
-	return ret;
-}
-
-static snd_pcm_uframes_t
-s3c_dma_pointer(struct snd_pcm_substream *substream)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct s3c24xx_runtime_data *prtd = runtime->private_data;
-	unsigned long res;
-	dma_addr_t src, dst;
-
-	pr_debug("Entered %s\n", __func__);
-
-	spin_lock(&prtd->lock);
-	s3c2410_dma_getposition(prtd->params->channel, &src, &dst);
-
-	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
-		res = dst - prtd->dma_start;
-	else
-		res = src - prtd->dma_start;
-
-	spin_unlock(&prtd->lock);
-
-	pr_debug("Pointer %x %x\n", src, dst);
-
-	/* we seem to be getting the odd error from the pcm library due
-	 * to out-of-bounds pointers. this is maybe due to the dma engine
-	 * not having loaded the new values for the channel before being
-	 * callled... (todo - fix )
-	 */
-
-	if (res >= snd_pcm_lib_buffer_bytes(substream)) {
-		if (res == snd_pcm_lib_buffer_bytes(substream))
-			res = 0;
-	}
-
-	return bytes_to_frames(substream->runtime, res);
-}
-
-static int s3c_dma_open(struct snd_pcm_substream *substream)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct s3c24xx_runtime_data *prtd;
-
-	pr_debug("Entered %s\n", __func__);
-
-	snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
-	snd_soc_set_runtime_hwparams(substream, &s3c_dma_hardware);
-
-	prtd = kzalloc(sizeof(struct s3c24xx_runtime_data), GFP_KERNEL);
-	if (prtd == NULL)
-		return -ENOMEM;
-
-	spin_lock_init(&prtd->lock);
-
-	runtime->private_data = prtd;
-	return 0;
-}
-
-static int s3c_dma_close(struct snd_pcm_substream *substream)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct s3c24xx_runtime_data *prtd = runtime->private_data;
-
-	pr_debug("Entered %s\n", __func__);
-
-	if (!prtd)
-		pr_debug("s3c_dma_close called with prtd == NULL\n");
-
-	kfree(prtd);
-
-	return 0;
-}
-
-static int s3c_dma_mmap(struct snd_pcm_substream *substream,
-	struct vm_area_struct *vma)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-
-	pr_debug("Entered %s\n", __func__);
-
-	return dma_mmap_writecombine(substream->pcm->card->dev, vma,
-				     runtime->dma_area,
-				     runtime->dma_addr,
-				     runtime->dma_bytes);
-}
-
-static struct snd_pcm_ops s3c_dma_ops = {
-	.open		= s3c_dma_open,
-	.close		= s3c_dma_close,
-	.ioctl		= snd_pcm_lib_ioctl,
-	.hw_params	= s3c_dma_hw_params,
-	.hw_free	= s3c_dma_hw_free,
-	.prepare	= s3c_dma_prepare,
-	.trigger	= s3c_dma_trigger,
-	.pointer	= s3c_dma_pointer,
-	.mmap		= s3c_dma_mmap,
-};
-
-static int s3c_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
-{
-	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
-	struct snd_dma_buffer *buf = &substream->dma_buffer;
-	size_t size = s3c_dma_hardware.buffer_bytes_max;
-
-	pr_debug("Entered %s\n", __func__);
-
-	buf->dev.type = SNDRV_DMA_TYPE_DEV;
-	buf->dev.dev = pcm->card->dev;
-	buf->private_data = NULL;
-	buf->area = dma_alloc_writecombine(pcm->card->dev, size,
-					   &buf->addr, GFP_KERNEL);
-	if (!buf->area)
-		return -ENOMEM;
-	buf->bytes = size;
-	return 0;
-}
-
-static void s3c_dma_free_dma_buffers(struct snd_pcm *pcm)
-{
-	struct snd_pcm_substream *substream;
-	struct snd_dma_buffer *buf;
-	int stream;
-
-	pr_debug("Entered %s\n", __func__);
-
-	for (stream = 0; stream < 2; stream++) {
-		substream = pcm->streams[stream].substream;
-		if (!substream)
-			continue;
-
-		buf = &substream->dma_buffer;
-		if (!buf->area)
-			continue;
-
-		dma_free_writecombine(pcm->card->dev, buf->bytes,
-				      buf->area, buf->addr);
-		buf->area = NULL;
-	}
-}
-
-static u64 s3c_dma_mask = DMA_BIT_MASK(32);
-
-static int s3c_dma_new(struct snd_card *card,
-	struct snd_soc_dai *dai, struct snd_pcm *pcm)
-{
-	int ret = 0;
-
-	pr_debug("Entered %s\n", __func__);
-
-	if (!card->dev->dma_mask)
-		card->dev->dma_mask = &s3c_dma_mask;
-	if (!card->dev->coherent_dma_mask)
-		card->dev->coherent_dma_mask = 0xffffffff;
-
-	if (dai->driver->playback.channels_min) {
-		ret = s3c_preallocate_dma_buffer(pcm,
-			SNDRV_PCM_STREAM_PLAYBACK);
-		if (ret)
-			goto out;
-	}
-
-	if (dai->driver->capture.channels_min) {
-		ret = s3c_preallocate_dma_buffer(pcm,
-			SNDRV_PCM_STREAM_CAPTURE);
-		if (ret)
-			goto out;
-	}
- out:
-	return ret;
-}
-
-static struct snd_soc_platform_driver s3c24xx_soc_platform = {
-	.ops		= &s3c_dma_ops,
-	.pcm_new	= s3c_dma_new,
-	.pcm_free	= s3c_dma_free_dma_buffers,
-};
-
-static int __devinit s3c24xx_soc_platform_probe(struct platform_device *pdev)
-{
-	return snd_soc_register_platform(&pdev->dev, &s3c24xx_soc_platform);
-}
-
-static int __devexit s3c24xx_soc_platform_remove(struct platform_device *pdev)
-{
-	snd_soc_unregister_platform(&pdev->dev);
-	return 0;
-}
-
-static struct platform_driver s3c24xx_pcm_driver = {
-	.driver = {
-		.name = "samsung-audio",
-		.owner = THIS_MODULE,
-	},
-
-	.probe = s3c24xx_soc_platform_probe,
-	.remove = __devexit_p(s3c24xx_soc_platform_remove),
-};
-
-static int __init snd_s3c24xx_pcm_init(void)
-{
-	return platform_driver_register(&s3c24xx_pcm_driver);
-}
-module_init(snd_s3c24xx_pcm_init);
-
-static void __exit snd_s3c24xx_pcm_exit(void)
-{
-	platform_driver_unregister(&s3c24xx_pcm_driver);
-}
-module_exit(snd_s3c24xx_pcm_exit);
-
-MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("Samsung S3C Audio DMA module");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:samsung-audio");
diff --git a/sound/soc/s3c24xx/s3c-dma.h b/sound/soc/s3c24xx/s3c-dma.h
deleted file mode 100644
index 748c07d..0000000
--- a/sound/soc/s3c24xx/s3c-dma.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  s3c-dma.h --
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  ALSA PCM interface for the Samsung S3C24xx CPU
- */
-
-#ifndef _S3C_AUDIO_H
-#define _S3C_AUDIO_H
-
-#define ST_RUNNING		(1<<0)
-#define ST_OPENED		(1<<1)
-
-struct s3c_dma_params {
-	struct s3c2410_dma_client *client;	/* stream identifier */
-	int channel;				/* Channel ID */
-	dma_addr_t dma_addr;
-	int dma_size;			/* Size of the DMA transfer */
-};
-
-#define S3C24XX_DAI_I2S			0
-
-/* platform data */
-extern struct snd_ac97_bus_ops s3c24xx_ac97_ops;
-
-#endif
diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c
index b3866d5..c471431 100644
--- a/sound/soc/s3c24xx/s3c-i2s-v2.c
+++ b/sound/soc/s3c24xx/s3c-i2s-v2.c
@@ -28,7 +28,7 @@
 
 #include "regs-i2s-v2.h"
 #include "s3c-i2s-v2.h"
-#include "s3c-dma.h"
+#include "dma.h"
 
 #undef S3C_IIS_V2_SUPPORTED
 
diff --git a/sound/soc/s3c24xx/s3c-pcm.c b/sound/soc/s3c24xx/s3c-pcm.c
index 2e020e1..e111d23 100644
--- a/sound/soc/s3c24xx/s3c-pcm.c
+++ b/sound/soc/s3c24xx/s3c-pcm.c
@@ -29,7 +29,7 @@
 #include <plat/audio.h>
 #include <plat/dma.h>
 
-#include "s3c-dma.h"
+#include "dma.h"
 #include "s3c-pcm.h"
 
 static struct s3c2410_dma_client s3c_pcm_dma_client_out = {
diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c
index 4a861cf..d953ff4 100644
--- a/sound/soc/s3c24xx/s3c2412-i2s.c
+++ b/sound/soc/s3c24xx/s3c2412-i2s.c
@@ -35,7 +35,7 @@
 #include <mach/regs-gpio.h>
 #include <mach/dma.h>
 
-#include "s3c-dma.h"
+#include "dma.h"
 #include "regs-i2s-v2.h"
 #include "s3c2412-i2s.h"
 
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c
index e060daa..13e41ed 100644
--- a/sound/soc/s3c24xx/s3c24xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c24xx-i2s.c
@@ -38,7 +38,7 @@
 
 #include <plat/regs-iis.h>
 
-#include "s3c-dma.h"
+#include "dma.h"
 #include "s3c24xx-i2s.h"
 
 static struct s3c2410_dma_client s3c24xx_dma_client_out = {
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec.c b/sound/soc/s3c24xx/s3c24xx_simtec.c
index c4c1114..3f052a5 100644
--- a/sound/soc/s3c24xx/s3c24xx_simtec.c
+++ b/sound/soc/s3c24xx/s3c24xx_simtec.c
@@ -21,7 +21,7 @@
 
 #include <plat/audio-simtec.h>
 
-#include "s3c-dma.h"
+#include "dma.h"
 #include "s3c24xx-i2s.h"
 #include "s3c24xx_simtec.h"
 
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c b/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
index 5180c2a..8b246ab 100644
--- a/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
+++ b/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
@@ -18,7 +18,7 @@
 
 #include <plat/audio-simtec.h>
 
-#include "s3c-dma.h"
+#include "dma.h"
 #include "s3c24xx-i2s.h"
 #include "s3c24xx_simtec.h"
 
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c b/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
index 7a7bb53..a922e1e 100644
--- a/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
+++ b/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
@@ -18,7 +18,7 @@
 
 #include <plat/audio-simtec.h>
 
-#include "s3c-dma.h"
+#include "dma.h"
 #include "s3c24xx-i2s.h"
 #include "s3c24xx_simtec.h"
 
diff --git a/sound/soc/s3c24xx/s3c24xx_uda134x.c b/sound/soc/s3c24xx/s3c24xx_uda134x.c
index 50d44fa..87eeb46 100644
--- a/sound/soc/s3c24xx/s3c24xx_uda134x.c
+++ b/sound/soc/s3c24xx/s3c24xx_uda134x.c
@@ -24,7 +24,7 @@
 
 #include <plat/regs-iis.h>
 
-#include "s3c-dma.h"
+#include "dma.h"
 #include "s3c24xx-i2s.h"
 #include "../codecs/uda134x.h"
 
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s-v4.c b/sound/soc/s3c24xx/s3c64xx-i2s-v4.c
index a962847..46b65d7 100644
--- a/sound/soc/s3c24xx/s3c64xx-i2s-v4.c
+++ b/sound/soc/s3c24xx/s3c64xx-i2s-v4.c
@@ -21,7 +21,7 @@
 #include <mach/map.h>
 #include <mach/dma.h>
 
-#include "s3c-dma.h"
+#include "dma.h"
 #include "regs-i2s-v2.h"
 #include "s3c64xx-i2s.h"
 
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c
index ae7acb6..0288d4e 100644
--- a/sound/soc/s3c24xx/s3c64xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c64xx-i2s.c
@@ -25,7 +25,7 @@
 #include <mach/map.h>
 #include <mach/dma.h>
 
-#include "s3c-dma.h"
+#include "dma.h"
 #include "regs-i2s-v2.h"
 #include "s3c64xx-i2s.h"
 
diff --git a/sound/soc/s3c24xx/smartq_wm8987.c b/sound/soc/s3c24xx/smartq_wm8987.c
index 863631a..1d55312 100644
--- a/sound/soc/s3c24xx/smartq_wm8987.c
+++ b/sound/soc/s3c24xx/smartq_wm8987.c
@@ -24,7 +24,7 @@
 
 #include <asm/mach-types.h>
 
-#include "s3c-dma.h"
+#include "dma.h"
 #include "s3c64xx-i2s.h"
 
 #include "../codecs/wm8750.h"
diff --git a/sound/soc/s3c24xx/smdk2443_wm9710.c b/sound/soc/s3c24xx/smdk2443_wm9710.c
index 911bb60..c50d19c 100644
--- a/sound/soc/s3c24xx/smdk2443_wm9710.c
+++ b/sound/soc/s3c24xx/smdk2443_wm9710.c
@@ -19,7 +19,7 @@
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 
-#include "s3c-dma.h"
+#include "dma.h"
 #include "s3c-ac97.h"
 
 static struct snd_soc_card smdk2443;
diff --git a/sound/soc/s3c24xx/smdk64xx_wm8580.c b/sound/soc/s3c24xx/smdk64xx_wm8580.c
index 7e75c8d..9ddc964 100644
--- a/sound/soc/s3c24xx/smdk64xx_wm8580.c
+++ b/sound/soc/s3c24xx/smdk64xx_wm8580.c
@@ -19,7 +19,7 @@
 #include <sound/soc-dapm.h>
 
 #include "../codecs/wm8580.h"
-#include "s3c-dma.h"
+#include "dma.h"
 #include "s3c64xx-i2s.h"
 
 /*
diff --git a/sound/soc/s3c24xx/smdk_spdif.c b/sound/soc/s3c24xx/smdk_spdif.c
index 082b88d..4fc6a9f 100644
--- a/sound/soc/s3c24xx/smdk_spdif.c
+++ b/sound/soc/s3c24xx/smdk_spdif.c
@@ -18,7 +18,7 @@
 
 #include <sound/soc.h>
 
-#include "s3c-dma.h"
+#include "dma.h"
 #include "spdif.h"
 
 /* Audio clock settings are belonged to board specific part. Every
diff --git a/sound/soc/s3c24xx/smdk_wm9713.c b/sound/soc/s3c24xx/smdk_wm9713.c
index ea96a51..80f2aef 100644
--- a/sound/soc/s3c24xx/smdk_wm9713.c
+++ b/sound/soc/s3c24xx/smdk_wm9713.c
@@ -15,7 +15,7 @@
 #include <linux/device.h>
 #include <sound/soc.h>
 
-#include "s3c-dma.h"
+#include "dma.h"
 #include "s3c-ac97.h"
 
 static struct snd_soc_card smdk;
diff --git a/sound/soc/s3c24xx/spdif.c b/sound/soc/s3c24xx/spdif.c
index ce554e9..dc85df3 100644
--- a/sound/soc/s3c24xx/spdif.c
+++ b/sound/soc/s3c24xx/spdif.c
@@ -20,7 +20,7 @@
 #include <plat/audio.h>
 #include <mach/dma.h>
 
-#include "s3c-dma.h"
+#include "dma.h"
 #include "spdif.h"
 
 /* Registers */
-- 
1.6.2.5

[PATCH 06/25] ASoC: Samsung: Rename AC97 platform device

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Call the AC97 controller devices found in S3C, S5P and newer
SoCs as 'samsung-ac97' rather than 's3c-ac97'.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 arch/arm/mach-s3c64xx/dev-audio.c    |    2 +-
 arch/arm/mach-s5pc100/dev-audio.c    |    2 +-
 arch/arm/mach-s5pv210/dev-audio.c    |    2 +-
 arch/arm/plat-s3c24xx/devs.c         |    2 +-
 sound/soc/s3c24xx/ln2440sbc_alc650.c |    2 +-
 sound/soc/s3c24xx/s3c-ac97.c         |    4 ++--
 sound/soc/s3c24xx/smdk2443_wm9710.c  |    2 +-
 sound/soc/s3c24xx/smdk_wm9713.c      |    2 +-
 8 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index c730dd2..1615c94 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -317,7 +317,7 @@ static struct s3c_audio_pdata s3c_ac97_pdata;
 static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32);
 
 struct platform_device s3c64xx_device_ac97 = {
-	.name		  = "s3c-ac97",
+	.name		  = "samsung-ac97",
 	.id		  = -1,
 	.num_resources	  = ARRAY_SIZE(s3c64xx_ac97_resource),
 	.resource	  = s3c64xx_ac97_resource,
diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c
index a699ed6..4207511 100644
--- a/arch/arm/mach-s5pc100/dev-audio.c
+++ b/arch/arm/mach-s5pc100/dev-audio.c
@@ -275,7 +275,7 @@ static struct s3c_audio_pdata s3c_ac97_pdata = {
 static u64 s5pc100_ac97_dmamask = DMA_BIT_MASK(32);
 
 struct platform_device s5pc100_device_ac97 = {
-	.name		  = "s3c-ac97",
+	.name		  = "samsung-ac97",
 	.id		  = -1,
 	.num_resources	  = ARRAY_SIZE(s5pc100_ac97_resource),
 	.resource	  = s5pc100_ac97_resource,
diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c
index 21dc6cf..e6db957 100644
--- a/arch/arm/mach-s5pv210/dev-audio.c
+++ b/arch/arm/mach-s5pv210/dev-audio.c
@@ -315,7 +315,7 @@ static struct s3c_audio_pdata s3c_ac97_pdata = {
 static u64 s5pv210_ac97_dmamask = DMA_BIT_MASK(32);
 
 struct platform_device s5pv210_device_ac97 = {
-	.name		  = "s3c-ac97",
+	.name		  = "samsung-ac97",
 	.id		  = -1,
 	.num_resources	  = ARRAY_SIZE(s5pv210_ac97_resource),
 	.resource	  = s5pv210_ac97_resource,
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index d8fb4e6..2f99fff 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -482,7 +482,7 @@ static struct resource s3c_ac97_resource[] = {
 };
 
 struct platform_device s3c_device_ac97 = {
-	.name		  = "s3c-ac97",
+	.name		  = "samsung-ac97",
 	.id		  = -1,
 	.num_resources	  = ARRAY_SIZE(s3c_ac97_resource),
 	.resource	  = s3c_ac97_resource,
diff --git a/sound/soc/s3c24xx/ln2440sbc_alc650.c b/sound/soc/s3c24xx/ln2440sbc_alc650.c
index 36e7e85..dda11ac 100644
--- a/sound/soc/s3c24xx/ln2440sbc_alc650.c
+++ b/sound/soc/s3c24xx/ln2440sbc_alc650.c
@@ -32,7 +32,7 @@ static struct snd_soc_dai_link ln2440sbc_dai[] = {
 {
 	.name = "AC97",
 	.stream_name = "AC97 HiFi",
-	.cpu_dai_name = "s3c-ac97",
+	.cpu_dai_name = "samsung-ac97",
 	.codec_dai_name = "ac97-hifi",
 	.codec_name = "ac97-codec",
 	.platform_name = "samsung-audio",
diff --git a/sound/soc/s3c24xx/s3c-ac97.c b/sound/soc/s3c24xx/s3c-ac97.c
index 408f9c9..5352cac 100644
--- a/sound/soc/s3c24xx/s3c-ac97.c
+++ b/sound/soc/s3c24xx/s3c-ac97.c
@@ -497,7 +497,7 @@ static struct platform_driver s3c_ac97_driver = {
 	.probe  = s3c_ac97_probe,
 	.remove = s3c_ac97_remove,
 	.driver = {
-		.name = "s3c-ac97",
+		.name = "samsung-ac97",
 		.owner = THIS_MODULE,
 	},
 };
@@ -517,4 +517,4 @@ module_exit(s3c_ac97_exit);
 MODULE_AUTHOR("Jaswinder Singh, <jassi.brar@samsung.com>");
 MODULE_DESCRIPTION("AC97 driver for the Samsung SoC");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:s3c-ac97");
+MODULE_ALIAS("platform:samsung-ac97");
diff --git a/sound/soc/s3c24xx/smdk2443_wm9710.c b/sound/soc/s3c24xx/smdk2443_wm9710.c
index c50d19c..0205138 100644
--- a/sound/soc/s3c24xx/smdk2443_wm9710.c
+++ b/sound/soc/s3c24xx/smdk2443_wm9710.c
@@ -28,7 +28,7 @@ static struct snd_soc_dai_link smdk2443_dai[] = {
 {
 	.name = "AC97",
 	.stream_name = "AC97 HiFi",
-	.cpu_dai_name = "s3c-ac97",
+	.cpu_dai_name = "samsung-ac97",
 	.codec_dai_name = "ac97-hifi",
 	.codec_name = "ac97-codec",
 	.platform_name = "samsung-audio",
diff --git a/sound/soc/s3c24xx/smdk_wm9713.c b/sound/soc/s3c24xx/smdk_wm9713.c
index 80f2aef..56b448d 100644
--- a/sound/soc/s3c24xx/smdk_wm9713.c
+++ b/sound/soc/s3c24xx/smdk_wm9713.c
@@ -46,7 +46,7 @@ static struct snd_soc_dai_link smdk_dai = {
 	.name = "AC97",
 	.stream_name = "AC97 PCM",
 	.platform_name = "samsung-audio",
-	.cpu_dai_name = "s3c-ac97",
+	.cpu_dai_name = "samsung-ac97",
 	.codec_dai_name = "wm9713-hifi",
 	.codec_name = "wm9713-codec",
 };
-- 
1.6.2.5

[PATCH 07/25] ASoC: Samsung: Rename AC97 driver

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Rename Samsung AC97 driver
	s3c-ac97.[c/h] -> ac97.[c/h]

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 sound/soc/s3c24xx/Makefile           |    4 +-
 sound/soc/s3c24xx/ac97.c             |  520 ++++++++++++++++++++++++++++++++++
 sound/soc/s3c24xx/ac97.h             |   21 ++
 sound/soc/s3c24xx/ln2440sbc_alc650.c |    2 +-
 sound/soc/s3c24xx/s3c-ac97.c         |  520 ----------------------------------
 sound/soc/s3c24xx/s3c-ac97.h         |   21 --
 sound/soc/s3c24xx/smdk2443_wm9710.c  |    2 +-
 sound/soc/s3c24xx/smdk_wm9713.c      |    2 +-
 8 files changed, 546 insertions(+), 546 deletions(-)
 create mode 100644 sound/soc/s3c24xx/ac97.c
 create mode 100644 sound/soc/s3c24xx/ac97.h
 delete mode 100644 sound/soc/s3c24xx/s3c-ac97.c
 delete mode 100644 sound/soc/s3c24xx/s3c-ac97.h

diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile
index 20aac45..551a63d 100644
--- a/sound/soc/s3c24xx/Makefile
+++ b/sound/soc/s3c24xx/Makefile
@@ -3,7 +3,7 @@ snd-soc-s3c24xx-objs := dma.o
 snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o
 snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o
 snd-soc-s3c64xx-i2s-objs := s3c64xx-i2s.o
-snd-soc-s3c-ac97-objs := s3c-ac97.o
+snd-soc-ac97-objs := ac97.o
 snd-soc-s3c64xx-i2s-v4-objs := s3c64xx-i2s-v4.o
 snd-soc-s3c-i2s-v2-objs := s3c-i2s-v2.o
 snd-soc-s3c-pcm-objs := s3c-pcm.o
@@ -11,7 +11,7 @@ snd-soc-samsung-spdif-objs := spdif.o
 
 obj-$(CONFIG_SND_S3C24XX_SOC) += snd-soc-s3c24xx.o
 obj-$(CONFIG_SND_S3C24XX_SOC_I2S) += snd-soc-s3c24xx-i2s.o
-obj-$(CONFIG_SND_S3C_SOC_AC97) += snd-soc-s3c-ac97.o
+obj-$(CONFIG_SND_S3C_SOC_AC97) += snd-soc-ac97.o
 obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o
 obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += snd-soc-s3c64xx-i2s.o
 obj-$(CONFIG_SND_S3C64XX_SOC_I2S_V4) += snd-soc-s3c64xx-i2s-v4.o
diff --git a/sound/soc/s3c24xx/ac97.c b/sound/soc/s3c24xx/ac97.c
new file mode 100644
index 0000000..4f999d1
--- /dev/null
+++ b/sound/soc/s3c24xx/ac97.c
@@ -0,0 +1,520 @@
+/* sound/soc/s3c24xx/ac97.c
+ *
+ * ALSA SoC Audio Layer - S3C AC97 Controller driver
+ * 	Evolved from s3c2443-ac97.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ * 	Author: Jaswinder Singh <jassi.brar@samsung.com>
+ * 	Credits: Graeme Gregory, Sean Choi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+
+#include <sound/soc.h>
+
+#include <plat/regs-ac97.h>
+#include <mach/dma.h>
+#include <plat/audio.h>
+
+#include "dma.h"
+#include "ac97.h"
+
+#define AC_CMD_ADDR(x) (x << 16)
+#define AC_CMD_DATA(x) (x & 0xffff)
+
+struct s3c_ac97_info {
+	struct clk         *ac97_clk;
+	void __iomem	   *regs;
+	struct mutex       lock;
+	struct completion  done;
+};
+static struct s3c_ac97_info s3c_ac97;
+
+static struct s3c2410_dma_client s3c_dma_client_out = {
+	.name = "AC97 PCMOut"
+};
+
+static struct s3c2410_dma_client s3c_dma_client_in = {
+	.name = "AC97 PCMIn"
+};
+
+static struct s3c2410_dma_client s3c_dma_client_micin = {
+	.name = "AC97 MicIn"
+};
+
+static struct s3c_dma_params s3c_ac97_pcm_out = {
+	.client		= &s3c_dma_client_out,
+	.dma_size	= 4,
+};
+
+static struct s3c_dma_params s3c_ac97_pcm_in = {
+	.client		= &s3c_dma_client_in,
+	.dma_size	= 4,
+};
+
+static struct s3c_dma_params s3c_ac97_mic_in = {
+	.client		= &s3c_dma_client_micin,
+	.dma_size	= 4,
+};
+
+static void s3c_ac97_activate(struct snd_ac97 *ac97)
+{
+	u32 ac_glbctrl, stat;
+
+	stat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT) & 0x7;
+	if (stat == S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE)
+		return; /* Return if already active */
+
+	INIT_COMPLETION(s3c_ac97.done);
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	ac_glbctrl = S3C_AC97_GLBCTRL_ACLINKON;
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	msleep(1);
+
+	ac_glbctrl |= S3C_AC97_GLBCTRL_TRANSFERDATAENABLE;
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	msleep(1);
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE;
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+	if (!wait_for_completion_timeout(&s3c_ac97.done, HZ))
+		pr_err("AC97: Unable to activate!");
+}
+
+static unsigned short s3c_ac97_read(struct snd_ac97 *ac97,
+	unsigned short reg)
+{
+	u32 ac_glbctrl, ac_codec_cmd;
+	u32 stat, addr, data;
+
+	mutex_lock(&s3c_ac97.lock);
+
+	s3c_ac97_activate(ac97);
+
+	INIT_COMPLETION(s3c_ac97.done);
+
+	ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+	ac_codec_cmd = S3C_AC97_CODEC_CMD_READ | AC_CMD_ADDR(reg);
+	writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+
+	udelay(50);
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE;
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+	if (!wait_for_completion_timeout(&s3c_ac97.done, HZ))
+		pr_err("AC97: Unable to read!");
+
+	stat = readl(s3c_ac97.regs + S3C_AC97_STAT);
+	addr = (stat >> 16) & 0x7f;
+	data = (stat & 0xffff);
+
+	if (addr != reg)
+		pr_err("ac97: req addr = %02x, rep addr = %02x\n",
+			reg, addr);
+
+	mutex_unlock(&s3c_ac97.lock);
+
+	return (unsigned short)data;
+}
+
+static void s3c_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+	unsigned short val)
+{
+	u32 ac_glbctrl, ac_codec_cmd;
+
+	mutex_lock(&s3c_ac97.lock);
+
+	s3c_ac97_activate(ac97);
+
+	INIT_COMPLETION(s3c_ac97.done);
+
+	ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+	ac_codec_cmd = AC_CMD_ADDR(reg) | AC_CMD_DATA(val);
+	writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+
+	udelay(50);
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE;
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+	if (!wait_for_completion_timeout(&s3c_ac97.done, HZ))
+		pr_err("AC97: Unable to write!");
+
+	ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+	ac_codec_cmd |= S3C_AC97_CODEC_CMD_READ;
+	writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+
+	mutex_unlock(&s3c_ac97.lock);
+}
+
+static void s3c_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	pr_debug("AC97: Cold reset\n");
+	writel(S3C_AC97_GLBCTRL_COLDRESET,
+			s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	msleep(1);
+
+	writel(0, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	msleep(1);
+}
+
+static void s3c_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	u32 stat;
+
+	stat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT) & 0x7;
+	if (stat == S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE)
+		return; /* Return if already active */
+
+	pr_debug("AC97: Warm reset\n");
+
+	writel(S3C_AC97_GLBCTRL_WARMRESET, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	msleep(1);
+
+	writel(0, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	msleep(1);
+
+	s3c_ac97_activate(ac97);
+}
+
+static irqreturn_t s3c_ac97_irq(int irq, void *dev_id)
+{
+	u32 ac_glbctrl, ac_glbstat;
+
+	ac_glbstat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT);
+
+	if (ac_glbstat & S3C_AC97_GLBSTAT_CODECREADY) {
+
+		ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+		ac_glbctrl &= ~S3C_AC97_GLBCTRL_CODECREADYIE;
+		writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+		complete(&s3c_ac97.done);
+	}
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	ac_glbctrl |= (1<<30); /* Clear interrupt */
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+	return IRQ_HANDLED;
+}
+
+struct snd_ac97_bus_ops soc_ac97_ops = {
+	.read       = s3c_ac97_read,
+	.write      = s3c_ac97_write,
+	.warm_reset = s3c_ac97_warm_reset,
+	.reset      = s3c_ac97_cold_reset,
+};
+EXPORT_SYMBOL_GPL(soc_ac97_ops);
+
+static int s3c_ac97_hw_params(struct snd_pcm_substream *substream,
+				  struct snd_pcm_hw_params *params,
+				  struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct s3c_dma_params *dma_data;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dma_data = &s3c_ac97_pcm_out;
+	else
+		dma_data = &s3c_ac97_pcm_in;
+
+	snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
+
+	return 0;
+}
+
+static int s3c_ac97_trigger(struct snd_pcm_substream *substream, int cmd,
+				struct snd_soc_dai *dai)
+{
+	u32 ac_glbctrl;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s3c_dma_params *dma_data =
+		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+		ac_glbctrl &= ~S3C_AC97_GLBCTRL_PCMINTM_MASK;
+	else
+		ac_glbctrl &= ~S3C_AC97_GLBCTRL_PCMOUTTM_MASK;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+			ac_glbctrl |= S3C_AC97_GLBCTRL_PCMINTM_DMA;
+		else
+			ac_glbctrl |= S3C_AC97_GLBCTRL_PCMOUTTM_DMA;
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		break;
+	}
+
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+	s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
+
+	return 0;
+}
+
+static int s3c_ac97_hw_mic_params(struct snd_pcm_substream *substream,
+				      struct snd_pcm_hw_params *params,
+				      struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		return -ENODEV;
+	else
+		snd_soc_dai_set_dma_data(cpu_dai, substream, &s3c_ac97_mic_in);
+
+	return 0;
+}
+
+static int s3c_ac97_mic_trigger(struct snd_pcm_substream *substream,
+				    int cmd, struct snd_soc_dai *dai)
+{
+	u32 ac_glbctrl;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s3c_dma_params *dma_data =
+		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	ac_glbctrl &= ~S3C_AC97_GLBCTRL_MICINTM_MASK;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		ac_glbctrl |= S3C_AC97_GLBCTRL_MICINTM_DMA;
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		break;
+	}
+
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+	s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
+
+	return 0;
+}
+
+static struct snd_soc_dai_ops s3c_ac97_dai_ops = {
+	.hw_params	= s3c_ac97_hw_params,
+	.trigger	= s3c_ac97_trigger,
+};
+
+static struct snd_soc_dai_ops s3c_ac97_mic_dai_ops = {
+	.hw_params	= s3c_ac97_hw_mic_params,
+	.trigger	= s3c_ac97_mic_trigger,
+};
+
+static struct snd_soc_dai_driver s3c_ac97_dai[] = {
+	[S3C_AC97_DAI_PCM] = {
+		.name =	"samsung-ac97",
+		.ac97_control = 1,
+		.playback = {
+			.stream_name = "AC97 Playback",
+			.channels_min = 2,
+			.channels_max = 2,
+			.rates = SNDRV_PCM_RATE_8000_48000,
+			.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.capture = {
+			.stream_name = "AC97 Capture",
+			.channels_min = 2,
+			.channels_max = 2,
+			.rates = SNDRV_PCM_RATE_8000_48000,
+			.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.ops = &s3c_ac97_dai_ops,
+	},
+	[S3C_AC97_DAI_MIC] = {
+		.name = "samsung-ac97-mic",
+		.ac97_control = 1,
+		.capture = {
+			.stream_name = "AC97 Mic Capture",
+			.channels_min = 1,
+			.channels_max = 1,
+			.rates = SNDRV_PCM_RATE_8000_48000,
+			.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.ops = &s3c_ac97_mic_dai_ops,
+	},
+};
+
+static __devinit int s3c_ac97_probe(struct platform_device *pdev)
+{
+	struct resource *mem_res, *dmatx_res, *dmarx_res, *dmamic_res, *irq_res;
+	struct s3c_audio_pdata *ac97_pdata;
+	int ret;
+
+	ac97_pdata = pdev->dev.platform_data;
+	if (!ac97_pdata || !ac97_pdata->cfg_gpio) {
+		dev_err(&pdev->dev, "cfg_gpio callback not provided!\n");
+		return -EINVAL;
+	}
+
+	/* Check for availability of necessary resource */
+	dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!dmatx_res) {
+		dev_err(&pdev->dev, "Unable to get AC97-TX dma resource\n");
+		return -ENXIO;
+	}
+
+	dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (!dmarx_res) {
+		dev_err(&pdev->dev, "Unable to get AC97-RX dma resource\n");
+		return -ENXIO;
+	}
+
+	dmamic_res = platform_get_resource(pdev, IORESOURCE_DMA, 2);
+	if (!dmamic_res) {
+		dev_err(&pdev->dev, "Unable to get AC97-MIC dma resource\n");
+		return -ENXIO;
+	}
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem_res) {
+		dev_err(&pdev->dev, "Unable to get register resource\n");
+		return -ENXIO;
+	}
+
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq_res) {
+		dev_err(&pdev->dev, "AC97 IRQ not provided!\n");
+		return -ENXIO;
+	}
+
+	if (!request_mem_region(mem_res->start,
+				resource_size(mem_res), "ac97")) {
+		dev_err(&pdev->dev, "Unable to request register region\n");
+		return -EBUSY;
+	}
+
+	s3c_ac97_pcm_out.channel = dmatx_res->start;
+	s3c_ac97_pcm_out.dma_addr = mem_res->start + S3C_AC97_PCM_DATA;
+	s3c_ac97_pcm_in.channel = dmarx_res->start;
+	s3c_ac97_pcm_in.dma_addr = mem_res->start + S3C_AC97_PCM_DATA;
+	s3c_ac97_mic_in.channel = dmamic_res->start;
+	s3c_ac97_mic_in.dma_addr = mem_res->start + S3C_AC97_MIC_DATA;
+
+	init_completion(&s3c_ac97.done);
+	mutex_init(&s3c_ac97.lock);
+
+	s3c_ac97.regs = ioremap(mem_res->start, resource_size(mem_res));
+	if (s3c_ac97.regs == NULL) {
+		dev_err(&pdev->dev, "Unable to ioremap register region\n");
+		ret = -ENXIO;
+		goto err1;
+	}
+
+	s3c_ac97.ac97_clk = clk_get(&pdev->dev, "ac97");
+	if (IS_ERR(s3c_ac97.ac97_clk)) {
+		dev_err(&pdev->dev, "ac97 failed to get ac97_clock\n");
+		ret = -ENODEV;
+		goto err2;
+	}
+	clk_enable(s3c_ac97.ac97_clk);
+
+	if (ac97_pdata->cfg_gpio(pdev)) {
+		dev_err(&pdev->dev, "Unable to configure gpio\n");
+		ret = -EINVAL;
+		goto err3;
+	}
+
+	ret = request_irq(irq_res->start, s3c_ac97_irq,
+					IRQF_DISABLED, "AC97", NULL);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "ac97: interrupt request failed.\n");
+		goto err4;
+	}
+
+	ret = snd_soc_register_dais(&pdev->dev, s3c_ac97_dai,
+			ARRAY_SIZE(s3c_ac97_dai));
+	if (ret)
+		goto err5;
+
+	return 0;
+
+err5:
+	free_irq(irq_res->start, NULL);
+err4:
+err3:
+	clk_disable(s3c_ac97.ac97_clk);
+	clk_put(s3c_ac97.ac97_clk);
+err2:
+	iounmap(s3c_ac97.regs);
+err1:
+	release_mem_region(mem_res->start, resource_size(mem_res));
+
+	return ret;
+}
+
+static __devexit int s3c_ac97_remove(struct platform_device *pdev)
+{
+	struct resource *mem_res, *irq_res;
+
+	snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(s3c_ac97_dai));
+
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (irq_res)
+		free_irq(irq_res->start, NULL);
+
+	clk_disable(s3c_ac97.ac97_clk);
+	clk_put(s3c_ac97.ac97_clk);
+
+	iounmap(s3c_ac97.regs);
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (mem_res)
+		release_mem_region(mem_res->start, resource_size(mem_res));
+
+	return 0;
+}
+
+static struct platform_driver s3c_ac97_driver = {
+	.probe  = s3c_ac97_probe,
+	.remove = s3c_ac97_remove,
+	.driver = {
+		.name = "samsung-ac97",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init s3c_ac97_init(void)
+{
+	return platform_driver_register(&s3c_ac97_driver);
+}
+module_init(s3c_ac97_init);
+
+static void __exit s3c_ac97_exit(void)
+{
+	platform_driver_unregister(&s3c_ac97_driver);
+}
+module_exit(s3c_ac97_exit);
+
+MODULE_AUTHOR("Jaswinder Singh, <jassi.brar@samsung.com>");
+MODULE_DESCRIPTION("AC97 driver for the Samsung SoC");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-ac97");
diff --git a/sound/soc/s3c24xx/ac97.h b/sound/soc/s3c24xx/ac97.h
new file mode 100644
index 0000000..a8f01b7
--- /dev/null
+++ b/sound/soc/s3c24xx/ac97.h
@@ -0,0 +1,21 @@
+/* sound/soc/s3c24xx/ac97.h
+ *
+ * ALSA SoC Audio Layer - S3C AC97 Controller driver
+ *	Evolved from s3c2443-ac97.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *	Author: Jaswinder Singh <jassi.brar@samsung.com>
+ *	Credits: Graeme Gregory, Sean Choi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S3C_AC97_H_
+#define __S3C_AC97_H_
+
+#define S3C_AC97_DAI_PCM 0
+#define S3C_AC97_DAI_MIC 1
+
+#endif /* __S3C_AC97_H_ */
diff --git a/sound/soc/s3c24xx/ln2440sbc_alc650.c b/sound/soc/s3c24xx/ln2440sbc_alc650.c
index dda11ac..e507174 100644
--- a/sound/soc/s3c24xx/ln2440sbc_alc650.c
+++ b/sound/soc/s3c24xx/ln2440sbc_alc650.c
@@ -24,7 +24,7 @@
 #include <sound/soc-dapm.h>
 
 #include "dma.h"
-#include "s3c-ac97.h"
+#include "ac97.h"
 
 static struct snd_soc_card ln2440sbc;
 
diff --git a/sound/soc/s3c24xx/s3c-ac97.c b/sound/soc/s3c24xx/s3c-ac97.c
deleted file mode 100644
index 5352cac..0000000
--- a/sound/soc/s3c24xx/s3c-ac97.c
+++ /dev/null
@@ -1,520 +0,0 @@
-/* sound/soc/s3c24xx/s3c-ac97.c
- *
- * ALSA SoC Audio Layer - S3C AC97 Controller driver
- * 	Evolved from s3c2443-ac97.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- * 	Author: Jaswinder Singh <jassi.brar@samsung.com>
- * 	Credits: Graeme Gregory, Sean Choi
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-
-#include <sound/soc.h>
-
-#include <plat/regs-ac97.h>
-#include <mach/dma.h>
-#include <plat/audio.h>
-
-#include "dma.h"
-#include "s3c-ac97.h"
-
-#define AC_CMD_ADDR(x) (x << 16)
-#define AC_CMD_DATA(x) (x & 0xffff)
-
-struct s3c_ac97_info {
-	struct clk         *ac97_clk;
-	void __iomem	   *regs;
-	struct mutex       lock;
-	struct completion  done;
-};
-static struct s3c_ac97_info s3c_ac97;
-
-static struct s3c2410_dma_client s3c_dma_client_out = {
-	.name = "AC97 PCMOut"
-};
-
-static struct s3c2410_dma_client s3c_dma_client_in = {
-	.name = "AC97 PCMIn"
-};
-
-static struct s3c2410_dma_client s3c_dma_client_micin = {
-	.name = "AC97 MicIn"
-};
-
-static struct s3c_dma_params s3c_ac97_pcm_out = {
-	.client		= &s3c_dma_client_out,
-	.dma_size	= 4,
-};
-
-static struct s3c_dma_params s3c_ac97_pcm_in = {
-	.client		= &s3c_dma_client_in,
-	.dma_size	= 4,
-};
-
-static struct s3c_dma_params s3c_ac97_mic_in = {
-	.client		= &s3c_dma_client_micin,
-	.dma_size	= 4,
-};
-
-static void s3c_ac97_activate(struct snd_ac97 *ac97)
-{
-	u32 ac_glbctrl, stat;
-
-	stat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT) & 0x7;
-	if (stat == S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE)
-		return; /* Return if already active */
-
-	INIT_COMPLETION(s3c_ac97.done);
-
-	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	ac_glbctrl = S3C_AC97_GLBCTRL_ACLINKON;
-	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	msleep(1);
-
-	ac_glbctrl |= S3C_AC97_GLBCTRL_TRANSFERDATAENABLE;
-	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	msleep(1);
-
-	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE;
-	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-
-	if (!wait_for_completion_timeout(&s3c_ac97.done, HZ))
-		pr_err("AC97: Unable to activate!");
-}
-
-static unsigned short s3c_ac97_read(struct snd_ac97 *ac97,
-	unsigned short reg)
-{
-	u32 ac_glbctrl, ac_codec_cmd;
-	u32 stat, addr, data;
-
-	mutex_lock(&s3c_ac97.lock);
-
-	s3c_ac97_activate(ac97);
-
-	INIT_COMPLETION(s3c_ac97.done);
-
-	ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD);
-	ac_codec_cmd = S3C_AC97_CODEC_CMD_READ | AC_CMD_ADDR(reg);
-	writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD);
-
-	udelay(50);
-
-	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE;
-	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-
-	if (!wait_for_completion_timeout(&s3c_ac97.done, HZ))
-		pr_err("AC97: Unable to read!");
-
-	stat = readl(s3c_ac97.regs + S3C_AC97_STAT);
-	addr = (stat >> 16) & 0x7f;
-	data = (stat & 0xffff);
-
-	if (addr != reg)
-		pr_err("s3c-ac97: req addr = %02x, rep addr = %02x\n",
-			reg, addr);
-
-	mutex_unlock(&s3c_ac97.lock);
-
-	return (unsigned short)data;
-}
-
-static void s3c_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
-	unsigned short val)
-{
-	u32 ac_glbctrl, ac_codec_cmd;
-
-	mutex_lock(&s3c_ac97.lock);
-
-	s3c_ac97_activate(ac97);
-
-	INIT_COMPLETION(s3c_ac97.done);
-
-	ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD);
-	ac_codec_cmd = AC_CMD_ADDR(reg) | AC_CMD_DATA(val);
-	writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD);
-
-	udelay(50);
-
-	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE;
-	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-
-	if (!wait_for_completion_timeout(&s3c_ac97.done, HZ))
-		pr_err("AC97: Unable to write!");
-
-	ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD);
-	ac_codec_cmd |= S3C_AC97_CODEC_CMD_READ;
-	writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD);
-
-	mutex_unlock(&s3c_ac97.lock);
-}
-
-static void s3c_ac97_cold_reset(struct snd_ac97 *ac97)
-{
-	pr_debug("AC97: Cold reset\n");
-	writel(S3C_AC97_GLBCTRL_COLDRESET,
-			s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	msleep(1);
-
-	writel(0, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	msleep(1);
-}
-
-static void s3c_ac97_warm_reset(struct snd_ac97 *ac97)
-{
-	u32 stat;
-
-	stat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT) & 0x7;
-	if (stat == S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE)
-		return; /* Return if already active */
-
-	pr_debug("AC97: Warm reset\n");
-
-	writel(S3C_AC97_GLBCTRL_WARMRESET, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	msleep(1);
-
-	writel(0, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	msleep(1);
-
-	s3c_ac97_activate(ac97);
-}
-
-static irqreturn_t s3c_ac97_irq(int irq, void *dev_id)
-{
-	u32 ac_glbctrl, ac_glbstat;
-
-	ac_glbstat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT);
-
-	if (ac_glbstat & S3C_AC97_GLBSTAT_CODECREADY) {
-
-		ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
-		ac_glbctrl &= ~S3C_AC97_GLBCTRL_CODECREADYIE;
-		writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-
-		complete(&s3c_ac97.done);
-	}
-
-	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	ac_glbctrl |= (1<<30); /* Clear interrupt */
-	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-
-	return IRQ_HANDLED;
-}
-
-struct snd_ac97_bus_ops soc_ac97_ops = {
-	.read       = s3c_ac97_read,
-	.write      = s3c_ac97_write,
-	.warm_reset = s3c_ac97_warm_reset,
-	.reset      = s3c_ac97_cold_reset,
-};
-EXPORT_SYMBOL_GPL(soc_ac97_ops);
-
-static int s3c_ac97_hw_params(struct snd_pcm_substream *substream,
-				  struct snd_pcm_hw_params *params,
-				  struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct s3c_dma_params *dma_data;
-
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		dma_data = &s3c_ac97_pcm_out;
-	else
-		dma_data = &s3c_ac97_pcm_in;
-
-	snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
-
-	return 0;
-}
-
-static int s3c_ac97_trigger(struct snd_pcm_substream *substream, int cmd,
-				struct snd_soc_dai *dai)
-{
-	u32 ac_glbctrl;
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct s3c_dma_params *dma_data =
-		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
-
-	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
-		ac_glbctrl &= ~S3C_AC97_GLBCTRL_PCMINTM_MASK;
-	else
-		ac_glbctrl &= ~S3C_AC97_GLBCTRL_PCMOUTTM_MASK;
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-	case SNDRV_PCM_TRIGGER_RESUME:
-	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
-			ac_glbctrl |= S3C_AC97_GLBCTRL_PCMINTM_DMA;
-		else
-			ac_glbctrl |= S3C_AC97_GLBCTRL_PCMOUTTM_DMA;
-		break;
-
-	case SNDRV_PCM_TRIGGER_STOP:
-	case SNDRV_PCM_TRIGGER_SUSPEND:
-	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		break;
-	}
-
-	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-
-	s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
-
-	return 0;
-}
-
-static int s3c_ac97_hw_mic_params(struct snd_pcm_substream *substream,
-				      struct snd_pcm_hw_params *params,
-				      struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		return -ENODEV;
-	else
-		snd_soc_dai_set_dma_data(cpu_dai, substream, &s3c_ac97_mic_in);
-
-	return 0;
-}
-
-static int s3c_ac97_mic_trigger(struct snd_pcm_substream *substream,
-				    int cmd, struct snd_soc_dai *dai)
-{
-	u32 ac_glbctrl;
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct s3c_dma_params *dma_data =
-		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
-
-	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	ac_glbctrl &= ~S3C_AC97_GLBCTRL_MICINTM_MASK;
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-	case SNDRV_PCM_TRIGGER_RESUME:
-	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		ac_glbctrl |= S3C_AC97_GLBCTRL_MICINTM_DMA;
-		break;
-
-	case SNDRV_PCM_TRIGGER_STOP:
-	case SNDRV_PCM_TRIGGER_SUSPEND:
-	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		break;
-	}
-
-	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-
-	s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
-
-	return 0;
-}
-
-static struct snd_soc_dai_ops s3c_ac97_dai_ops = {
-	.hw_params	= s3c_ac97_hw_params,
-	.trigger	= s3c_ac97_trigger,
-};
-
-static struct snd_soc_dai_ops s3c_ac97_mic_dai_ops = {
-	.hw_params	= s3c_ac97_hw_mic_params,
-	.trigger	= s3c_ac97_mic_trigger,
-};
-
-static struct snd_soc_dai_driver s3c_ac97_dai[] = {
-	[S3C_AC97_DAI_PCM] = {
-		.name =	"s3c-ac97",
-		.ac97_control = 1,
-		.playback = {
-			.stream_name = "AC97 Playback",
-			.channels_min = 2,
-			.channels_max = 2,
-			.rates = SNDRV_PCM_RATE_8000_48000,
-			.formats = SNDRV_PCM_FMTBIT_S16_LE,},
-		.capture = {
-			.stream_name = "AC97 Capture",
-			.channels_min = 2,
-			.channels_max = 2,
-			.rates = SNDRV_PCM_RATE_8000_48000,
-			.formats = SNDRV_PCM_FMTBIT_S16_LE,},
-		.ops = &s3c_ac97_dai_ops,
-	},
-	[S3C_AC97_DAI_MIC] = {
-		.name = "s3c-ac97-mic",
-		.ac97_control = 1,
-		.capture = {
-			.stream_name = "AC97 Mic Capture",
-			.channels_min = 1,
-			.channels_max = 1,
-			.rates = SNDRV_PCM_RATE_8000_48000,
-			.formats = SNDRV_PCM_FMTBIT_S16_LE,},
-		.ops = &s3c_ac97_mic_dai_ops,
-	},
-};
-
-static __devinit int s3c_ac97_probe(struct platform_device *pdev)
-{
-	struct resource *mem_res, *dmatx_res, *dmarx_res, *dmamic_res, *irq_res;
-	struct s3c_audio_pdata *ac97_pdata;
-	int ret;
-
-	ac97_pdata = pdev->dev.platform_data;
-	if (!ac97_pdata || !ac97_pdata->cfg_gpio) {
-		dev_err(&pdev->dev, "cfg_gpio callback not provided!\n");
-		return -EINVAL;
-	}
-
-	/* Check for availability of necessary resource */
-	dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	if (!dmatx_res) {
-		dev_err(&pdev->dev, "Unable to get AC97-TX dma resource\n");
-		return -ENXIO;
-	}
-
-	dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-	if (!dmarx_res) {
-		dev_err(&pdev->dev, "Unable to get AC97-RX dma resource\n");
-		return -ENXIO;
-	}
-
-	dmamic_res = platform_get_resource(pdev, IORESOURCE_DMA, 2);
-	if (!dmamic_res) {
-		dev_err(&pdev->dev, "Unable to get AC97-MIC dma resource\n");
-		return -ENXIO;
-	}
-
-	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem_res) {
-		dev_err(&pdev->dev, "Unable to get register resource\n");
-		return -ENXIO;
-	}
-
-	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!irq_res) {
-		dev_err(&pdev->dev, "AC97 IRQ not provided!\n");
-		return -ENXIO;
-	}
-
-	if (!request_mem_region(mem_res->start,
-				resource_size(mem_res), "s3c-ac97")) {
-		dev_err(&pdev->dev, "Unable to request register region\n");
-		return -EBUSY;
-	}
-
-	s3c_ac97_pcm_out.channel = dmatx_res->start;
-	s3c_ac97_pcm_out.dma_addr = mem_res->start + S3C_AC97_PCM_DATA;
-	s3c_ac97_pcm_in.channel = dmarx_res->start;
-	s3c_ac97_pcm_in.dma_addr = mem_res->start + S3C_AC97_PCM_DATA;
-	s3c_ac97_mic_in.channel = dmamic_res->start;
-	s3c_ac97_mic_in.dma_addr = mem_res->start + S3C_AC97_MIC_DATA;
-
-	init_completion(&s3c_ac97.done);
-	mutex_init(&s3c_ac97.lock);
-
-	s3c_ac97.regs = ioremap(mem_res->start, resource_size(mem_res));
-	if (s3c_ac97.regs == NULL) {
-		dev_err(&pdev->dev, "Unable to ioremap register region\n");
-		ret = -ENXIO;
-		goto err1;
-	}
-
-	s3c_ac97.ac97_clk = clk_get(&pdev->dev, "ac97");
-	if (IS_ERR(s3c_ac97.ac97_clk)) {
-		dev_err(&pdev->dev, "s3c-ac97 failed to get ac97_clock\n");
-		ret = -ENODEV;
-		goto err2;
-	}
-	clk_enable(s3c_ac97.ac97_clk);
-
-	if (ac97_pdata->cfg_gpio(pdev)) {
-		dev_err(&pdev->dev, "Unable to configure gpio\n");
-		ret = -EINVAL;
-		goto err3;
-	}
-
-	ret = request_irq(irq_res->start, s3c_ac97_irq,
-					IRQF_DISABLED, "AC97", NULL);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "s3c-ac97: interrupt request failed.\n");
-		goto err4;
-	}
-
-	ret = snd_soc_register_dais(&pdev->dev, s3c_ac97_dai,
-			ARRAY_SIZE(s3c_ac97_dai));
-	if (ret)
-		goto err5;
-
-	return 0;
-
-err5:
-	free_irq(irq_res->start, NULL);
-err4:
-err3:
-	clk_disable(s3c_ac97.ac97_clk);
-	clk_put(s3c_ac97.ac97_clk);
-err2:
-	iounmap(s3c_ac97.regs);
-err1:
-	release_mem_region(mem_res->start, resource_size(mem_res));
-
-	return ret;
-}
-
-static __devexit int s3c_ac97_remove(struct platform_device *pdev)
-{
-	struct resource *mem_res, *irq_res;
-
-	snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(s3c_ac97_dai));
-
-	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (irq_res)
-		free_irq(irq_res->start, NULL);
-
-	clk_disable(s3c_ac97.ac97_clk);
-	clk_put(s3c_ac97.ac97_clk);
-
-	iounmap(s3c_ac97.regs);
-
-	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (mem_res)
-		release_mem_region(mem_res->start, resource_size(mem_res));
-
-	return 0;
-}
-
-static struct platform_driver s3c_ac97_driver = {
-	.probe  = s3c_ac97_probe,
-	.remove = s3c_ac97_remove,
-	.driver = {
-		.name = "samsung-ac97",
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init s3c_ac97_init(void)
-{
-	return platform_driver_register(&s3c_ac97_driver);
-}
-module_init(s3c_ac97_init);
-
-static void __exit s3c_ac97_exit(void)
-{
-	platform_driver_unregister(&s3c_ac97_driver);
-}
-module_exit(s3c_ac97_exit);
-
-MODULE_AUTHOR("Jaswinder Singh, <jassi.brar@samsung.com>");
-MODULE_DESCRIPTION("AC97 driver for the Samsung SoC");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:samsung-ac97");
diff --git a/sound/soc/s3c24xx/s3c-ac97.h b/sound/soc/s3c24xx/s3c-ac97.h
deleted file mode 100644
index 5dcedd0..0000000
--- a/sound/soc/s3c24xx/s3c-ac97.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* sound/soc/s3c24xx/s3c-ac97.h
- *
- * ALSA SoC Audio Layer - S3C AC97 Controller driver
- * 	Evolved from s3c2443-ac97.h
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- * 	Author: Jaswinder Singh <jassi.brar@samsung.com>
- * 	Credits: Graeme Gregory, Sean Choi
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S3C_AC97_H_
-#define __S3C_AC97_H_
-
-#define S3C_AC97_DAI_PCM 0
-#define S3C_AC97_DAI_MIC 1
-
-#endif /* __S3C_AC97_H_ */
diff --git a/sound/soc/s3c24xx/smdk2443_wm9710.c b/sound/soc/s3c24xx/smdk2443_wm9710.c
index 0205138..5051699 100644
--- a/sound/soc/s3c24xx/smdk2443_wm9710.c
+++ b/sound/soc/s3c24xx/smdk2443_wm9710.c
@@ -20,7 +20,7 @@
 #include <sound/soc-dapm.h>
 
 #include "dma.h"
-#include "s3c-ac97.h"
+#include "ac97.h"
 
 static struct snd_soc_card smdk2443;
 
diff --git a/sound/soc/s3c24xx/smdk_wm9713.c b/sound/soc/s3c24xx/smdk_wm9713.c
index 56b448d..7ce2430 100644
--- a/sound/soc/s3c24xx/smdk_wm9713.c
+++ b/sound/soc/s3c24xx/smdk_wm9713.c
@@ -16,7 +16,7 @@
 #include <sound/soc.h>
 
 #include "dma.h"
-#include "s3c-ac97.h"
+#include "ac97.h"
 
 static struct snd_soc_card smdk;
 
-- 
1.6.2.5

[PATCH 08/25] ASoC: Samsung: Rename PCM driver

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Rename Samsung PCM Controller driver
	s3c-pcm.[c/h] -> pcm.[c/h]

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 sound/soc/s3c24xx/Makefile  |    4 +-
 sound/soc/s3c24xx/pcm.c     |  552 +++++++++++++++++++++++++++++++++++++++++++
 sound/soc/s3c24xx/pcm.h     |  124 ++++++++++
 sound/soc/s3c24xx/s3c-pcm.c |  552 -------------------------------------------
 sound/soc/s3c24xx/s3c-pcm.h |  124 ----------
 5 files changed, 678 insertions(+), 678 deletions(-)
 create mode 100644 sound/soc/s3c24xx/pcm.c
 create mode 100644 sound/soc/s3c24xx/pcm.h
 delete mode 100644 sound/soc/s3c24xx/s3c-pcm.c
 delete mode 100644 sound/soc/s3c24xx/s3c-pcm.h

diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile
index 551a63d..93de2a0 100644
--- a/sound/soc/s3c24xx/Makefile
+++ b/sound/soc/s3c24xx/Makefile
@@ -6,8 +6,8 @@ snd-soc-s3c64xx-i2s-objs := s3c64xx-i2s.o
 snd-soc-ac97-objs := ac97.o
 snd-soc-s3c64xx-i2s-v4-objs := s3c64xx-i2s-v4.o
 snd-soc-s3c-i2s-v2-objs := s3c-i2s-v2.o
-snd-soc-s3c-pcm-objs := s3c-pcm.o
 snd-soc-samsung-spdif-objs := spdif.o
+snd-soc-pcm-objs := pcm.o
 
 obj-$(CONFIG_SND_S3C24XX_SOC) += snd-soc-s3c24xx.o
 obj-$(CONFIG_SND_S3C24XX_SOC_I2S) += snd-soc-s3c24xx-i2s.o
@@ -16,8 +16,8 @@ obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o
 obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += snd-soc-s3c64xx-i2s.o
 obj-$(CONFIG_SND_S3C64XX_SOC_I2S_V4) += snd-soc-s3c64xx-i2s-v4.o
 obj-$(CONFIG_SND_S3C_I2SV2_SOC) += snd-soc-s3c-i2s-v2.o
-obj-$(CONFIG_SND_S3C_SOC_PCM) += snd-soc-s3c-pcm.o
 obj-$(CONFIG_SND_S5P_SOC_SPDIF) += snd-soc-samsung-spdif.o
+obj-$(CONFIG_SND_S3C_SOC_PCM) += snd-soc-pcm.o
 
 # S3C24XX Machine Support
 snd-soc-jive-wm8750-objs := jive_wm8750.o
diff --git a/sound/soc/s3c24xx/pcm.c b/sound/soc/s3c24xx/pcm.c
new file mode 100644
index 0000000..4d0f6e4
--- /dev/null
+++ b/sound/soc/s3c24xx/pcm.c
@@ -0,0 +1,552 @@
+/* sound/soc/s3c24xx/pcm.c
+ *
+ * ALSA SoC Audio Layer - S3C PCM-Controller driver
+ *
+ * Copyright (c) 2009 Samsung Electronics Co. Ltd
+ * Author: Jaswinder Singh <jassi.brar@samsung.com>
+ * based upon I2S drivers by Ben Dooks.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include <plat/audio.h>
+#include <plat/dma.h>
+
+#include "dma.h"
+#include "pcm.h"
+
+static struct s3c2410_dma_client s3c_pcm_dma_client_out = {
+	.name		= "PCM Stereo out"
+};
+
+static struct s3c2410_dma_client s3c_pcm_dma_client_in = {
+	.name		= "PCM Stereo in"
+};
+
+static struct s3c_dma_params s3c_pcm_stereo_out[] = {
+	[0] = {
+		.client		= &s3c_pcm_dma_client_out,
+		.dma_size	= 4,
+	},
+	[1] = {
+		.client		= &s3c_pcm_dma_client_out,
+		.dma_size	= 4,
+	},
+};
+
+static struct s3c_dma_params s3c_pcm_stereo_in[] = {
+	[0] = {
+		.client		= &s3c_pcm_dma_client_in,
+		.dma_size	= 4,
+	},
+	[1] = {
+		.client		= &s3c_pcm_dma_client_in,
+		.dma_size	= 4,
+	},
+};
+
+static struct s3c_pcm_info s3c_pcm[2];
+
+static void s3c_pcm_snd_txctrl(struct s3c_pcm_info *pcm, int on)
+{
+	void __iomem *regs = pcm->regs;
+	u32 ctl, clkctl;
+
+	clkctl = readl(regs + S3C_PCM_CLKCTL);
+	ctl = readl(regs + S3C_PCM_CTL);
+	ctl &= ~(S3C_PCM_CTL_TXDIPSTICK_MASK
+			 << S3C_PCM_CTL_TXDIPSTICK_SHIFT);
+
+	if (on) {
+		ctl |= S3C_PCM_CTL_TXDMA_EN;
+		ctl |= S3C_PCM_CTL_TXFIFO_EN;
+		ctl |= S3C_PCM_CTL_ENABLE;
+		ctl |= (0x4<<S3C_PCM_CTL_TXDIPSTICK_SHIFT);
+		clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
+	} else {
+		ctl &= ~S3C_PCM_CTL_TXDMA_EN;
+		ctl &= ~S3C_PCM_CTL_TXFIFO_EN;
+
+		if (!(ctl & S3C_PCM_CTL_RXFIFO_EN)) {
+			ctl &= ~S3C_PCM_CTL_ENABLE;
+			if (!pcm->idleclk)
+				clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
+		}
+	}
+
+	writel(clkctl, regs + S3C_PCM_CLKCTL);
+	writel(ctl, regs + S3C_PCM_CTL);
+}
+
+static void s3c_pcm_snd_rxctrl(struct s3c_pcm_info *pcm, int on)
+{
+	void __iomem *regs = pcm->regs;
+	u32 ctl, clkctl;
+
+	ctl = readl(regs + S3C_PCM_CTL);
+	clkctl = readl(regs + S3C_PCM_CLKCTL);
+	ctl &= ~(S3C_PCM_CTL_RXDIPSTICK_MASK
+			 << S3C_PCM_CTL_RXDIPSTICK_SHIFT);
+
+	if (on) {
+		ctl |= S3C_PCM_CTL_RXDMA_EN;
+		ctl |= S3C_PCM_CTL_RXFIFO_EN;
+		ctl |= S3C_PCM_CTL_ENABLE;
+		ctl |= (0x20<<S3C_PCM_CTL_RXDIPSTICK_SHIFT);
+		clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
+	} else {
+		ctl &= ~S3C_PCM_CTL_RXDMA_EN;
+		ctl &= ~S3C_PCM_CTL_RXFIFO_EN;
+
+		if (!(ctl & S3C_PCM_CTL_TXFIFO_EN)) {
+			ctl &= ~S3C_PCM_CTL_ENABLE;
+			if (!pcm->idleclk)
+				clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
+		}
+	}
+
+	writel(clkctl, regs + S3C_PCM_CLKCTL);
+	writel(ctl, regs + S3C_PCM_CTL);
+}
+
+static int s3c_pcm_trigger(struct snd_pcm_substream *substream, int cmd,
+			       struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	unsigned long flags;
+
+	dev_dbg(pcm->dev, "Entered %s\n", __func__);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		spin_lock_irqsave(&pcm->lock, flags);
+
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+			s3c_pcm_snd_rxctrl(pcm, 1);
+		else
+			s3c_pcm_snd_txctrl(pcm, 1);
+
+		spin_unlock_irqrestore(&pcm->lock, flags);
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		spin_lock_irqsave(&pcm->lock, flags);
+
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+			s3c_pcm_snd_rxctrl(pcm, 0);
+		else
+			s3c_pcm_snd_txctrl(pcm, 0);
+
+		spin_unlock_irqrestore(&pcm->lock, flags);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s3c_pcm_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *socdai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct s3c_dma_params *dma_data;
+	void __iomem *regs = pcm->regs;
+	struct clk *clk;
+	int sclk_div, sync_div;
+	unsigned long flags;
+	u32 clkctl;
+
+	dev_dbg(pcm->dev, "Entered %s\n", __func__);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dma_data = pcm->dma_playback;
+	else
+		dma_data = pcm->dma_capture;
+
+	snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data);
+
+	/* Strictly check for sample size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&pcm->lock, flags);
+
+	/* Get hold of the PCMSOURCE_CLK */
+	clkctl = readl(regs + S3C_PCM_CLKCTL);
+	if (clkctl & S3C_PCM_CLKCTL_SERCLKSEL_PCLK)
+		clk = pcm->pclk;
+	else
+		clk = pcm->cclk;
+
+	/* Set the SCLK divider */
+	sclk_div = clk_get_rate(clk) / pcm->sclk_per_fs /
+					params_rate(params) / 2 - 1;
+
+	clkctl &= ~(S3C_PCM_CLKCTL_SCLKDIV_MASK
+			<< S3C_PCM_CLKCTL_SCLKDIV_SHIFT);
+	clkctl |= ((sclk_div & S3C_PCM_CLKCTL_SCLKDIV_MASK)
+			<< S3C_PCM_CLKCTL_SCLKDIV_SHIFT);
+
+	/* Set the SYNC divider */
+	sync_div = pcm->sclk_per_fs - 1;
+
+	clkctl &= ~(S3C_PCM_CLKCTL_SYNCDIV_MASK
+				<< S3C_PCM_CLKCTL_SYNCDIV_SHIFT);
+	clkctl |= ((sync_div & S3C_PCM_CLKCTL_SYNCDIV_MASK)
+				<< S3C_PCM_CLKCTL_SYNCDIV_SHIFT);
+
+	writel(clkctl, regs + S3C_PCM_CLKCTL);
+
+	spin_unlock_irqrestore(&pcm->lock, flags);
+
+	dev_dbg(pcm->dev, "PCMSOURCE_CLK-%lu SCLK=%ufs SCLK_DIV=%d SYNC_DIV=%d\n",
+				clk_get_rate(clk), pcm->sclk_per_fs,
+				sclk_div, sync_div);
+
+	return 0;
+}
+
+static int s3c_pcm_set_fmt(struct snd_soc_dai *cpu_dai,
+			       unsigned int fmt)
+{
+	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai);
+	void __iomem *regs = pcm->regs;
+	unsigned long flags;
+	int ret = 0;
+	u32 ctl;
+
+	dev_dbg(pcm->dev, "Entered %s\n", __func__);
+
+	spin_lock_irqsave(&pcm->lock, flags);
+
+	ctl = readl(regs + S3C_PCM_CTL);
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		/* Nothing to do, NB_NF by default */
+		break;
+	default:
+		dev_err(pcm->dev, "Unsupported clock inversion!\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		/* Nothing to do, Master by default */
+		break;
+	default:
+		dev_err(pcm->dev, "Unsupported master/slave format!\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_CLOCK_MASK) {
+	case SND_SOC_DAIFMT_CONT:
+		pcm->idleclk = 1;
+		break;
+	case SND_SOC_DAIFMT_GATED:
+		pcm->idleclk = 0;
+		break;
+	default:
+		dev_err(pcm->dev, "Invalid Clock gating request!\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_A:
+		ctl |= S3C_PCM_CTL_TXMSB_AFTER_FSYNC;
+		ctl |= S3C_PCM_CTL_RXMSB_AFTER_FSYNC;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		ctl &= ~S3C_PCM_CTL_TXMSB_AFTER_FSYNC;
+		ctl &= ~S3C_PCM_CTL_RXMSB_AFTER_FSYNC;
+		break;
+	default:
+		dev_err(pcm->dev, "Unsupported data format!\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	writel(ctl, regs + S3C_PCM_CTL);
+
+exit:
+	spin_unlock_irqrestore(&pcm->lock, flags);
+
+	return ret;
+}
+
+static int s3c_pcm_set_clkdiv(struct snd_soc_dai *cpu_dai,
+						int div_id, int div)
+{
+	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai);
+
+	switch (div_id) {
+	case S3C_PCM_SCLK_PER_FS:
+		pcm->sclk_per_fs = div;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s3c_pcm_set_sysclk(struct snd_soc_dai *cpu_dai,
+				  int clk_id, unsigned int freq, int dir)
+{
+	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai);
+	void __iomem *regs = pcm->regs;
+	u32 clkctl = readl(regs + S3C_PCM_CLKCTL);
+
+	switch (clk_id) {
+	case S3C_PCM_CLKSRC_PCLK:
+		clkctl |= S3C_PCM_CLKCTL_SERCLKSEL_PCLK;
+		break;
+
+	case S3C_PCM_CLKSRC_MUX:
+		clkctl &= ~S3C_PCM_CLKCTL_SERCLKSEL_PCLK;
+
+		if (clk_get_rate(pcm->cclk) != freq)
+			clk_set_rate(pcm->cclk, freq);
+
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	writel(clkctl, regs + S3C_PCM_CLKCTL);
+
+	return 0;
+}
+
+static struct snd_soc_dai_ops s3c_pcm_dai_ops = {
+	.set_sysclk	= s3c_pcm_set_sysclk,
+	.set_clkdiv	= s3c_pcm_set_clkdiv,
+	.trigger	= s3c_pcm_trigger,
+	.hw_params	= s3c_pcm_hw_params,
+	.set_fmt	= s3c_pcm_set_fmt,
+};
+
+#define S3C_PCM_RATES  SNDRV_PCM_RATE_8000_96000
+
+#define S3C_PCM_DAI_DECLARE			\
+	.symmetric_rates = 1,					\
+	.ops = &s3c_pcm_dai_ops,				\
+	.playback = {						\
+		.channels_min	= 2,				\
+		.channels_max	= 2,				\
+		.rates		= S3C_PCM_RATES,		\
+		.formats	= SNDRV_PCM_FMTBIT_S16_LE,	\
+	},							\
+	.capture = {						\
+		.channels_min	= 2,				\
+		.channels_max	= 2,				\
+		.rates		= S3C_PCM_RATES,		\
+		.formats	= SNDRV_PCM_FMTBIT_S16_LE,	\
+	}
+
+struct snd_soc_dai_driver s3c_pcm_dai[] = {
+	[0] = {
+		.name	= "samsung-pcm.0",
+		S3C_PCM_DAI_DECLARE,
+	},
+	[1] = {
+		.name	= "samsung-pcm.1",
+		S3C_PCM_DAI_DECLARE,
+	},
+};
+EXPORT_SYMBOL_GPL(s3c_pcm_dai);
+
+static __devinit int s3c_pcm_dev_probe(struct platform_device *pdev)
+{
+	struct s3c_pcm_info *pcm;
+	struct resource *mem_res, *dmatx_res, *dmarx_res;
+	struct s3c_audio_pdata *pcm_pdata;
+	int ret;
+
+	/* Check for valid device index */
+	if ((pdev->id < 0) || pdev->id >= ARRAY_SIZE(s3c_pcm)) {
+		dev_err(&pdev->dev, "id %d out of range\n", pdev->id);
+		return -EINVAL;
+	}
+
+	pcm_pdata = pdev->dev.platform_data;
+
+	/* Check for availability of necessary resource */
+	dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!dmatx_res) {
+		dev_err(&pdev->dev, "Unable to get PCM-TX dma resource\n");
+		return -ENXIO;
+	}
+
+	dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (!dmarx_res) {
+		dev_err(&pdev->dev, "Unable to get PCM-RX dma resource\n");
+		return -ENXIO;
+	}
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem_res) {
+		dev_err(&pdev->dev, "Unable to get register resource\n");
+		return -ENXIO;
+	}
+
+	if (pcm_pdata && pcm_pdata->cfg_gpio && pcm_pdata->cfg_gpio(pdev)) {
+		dev_err(&pdev->dev, "Unable to configure gpio\n");
+		return -EINVAL;
+	}
+
+	pcm = &s3c_pcm[pdev->id];
+	pcm->dev = &pdev->dev;
+
+	spin_lock_init(&pcm->lock);
+
+	/* Default is 128fs */
+	pcm->sclk_per_fs = 128;
+
+	pcm->cclk = clk_get(&pdev->dev, "audio-bus");
+	if (IS_ERR(pcm->cclk)) {
+		dev_err(&pdev->dev, "failed to get audio-bus\n");
+		ret = PTR_ERR(pcm->cclk);
+		goto err1;
+	}
+	clk_enable(pcm->cclk);
+
+	/* record our pcm structure for later use in the callbacks */
+	dev_set_drvdata(&pdev->dev, pcm);
+
+	if (!request_mem_region(mem_res->start,
+				resource_size(mem_res), "samsung-pcm")) {
+		dev_err(&pdev->dev, "Unable to request register region\n");
+		ret = -EBUSY;
+		goto err2;
+	}
+
+	pcm->regs = ioremap(mem_res->start, 0x100);
+	if (pcm->regs == NULL) {
+		dev_err(&pdev->dev, "cannot ioremap registers\n");
+		ret = -ENXIO;
+		goto err3;
+	}
+
+	pcm->pclk = clk_get(&pdev->dev, "pcm");
+	if (IS_ERR(pcm->pclk)) {
+		dev_err(&pdev->dev, "failed to get pcm_clock\n");
+		ret = -ENOENT;
+		goto err4;
+	}
+	clk_enable(pcm->pclk);
+
+	ret = snd_soc_register_dai(&pdev->dev, &s3c_pcm_dai[pdev->id]);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "failed to get pcm_clock\n");
+		goto err5;
+	}
+
+	s3c_pcm_stereo_in[pdev->id].dma_addr = mem_res->start
+							+ S3C_PCM_RXFIFO;
+	s3c_pcm_stereo_out[pdev->id].dma_addr = mem_res->start
+							+ S3C_PCM_TXFIFO;
+
+	s3c_pcm_stereo_in[pdev->id].channel = dmarx_res->start;
+	s3c_pcm_stereo_out[pdev->id].channel = dmatx_res->start;
+
+	pcm->dma_capture = &s3c_pcm_stereo_in[pdev->id];
+	pcm->dma_playback = &s3c_pcm_stereo_out[pdev->id];
+
+	return 0;
+
+err5:
+	clk_disable(pcm->pclk);
+	clk_put(pcm->pclk);
+err4:
+	iounmap(pcm->regs);
+err3:
+	release_mem_region(mem_res->start, resource_size(mem_res));
+err2:
+	clk_disable(pcm->cclk);
+	clk_put(pcm->cclk);
+err1:
+	return ret;
+}
+
+static __devexit int s3c_pcm_dev_remove(struct platform_device *pdev)
+{
+	struct s3c_pcm_info *pcm = &s3c_pcm[pdev->id];
+	struct resource *mem_res;
+
+	snd_soc_unregister_dai(&pdev->dev);
+
+	iounmap(pcm->regs);
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(mem_res->start, resource_size(mem_res));
+
+	clk_disable(pcm->cclk);
+	clk_disable(pcm->pclk);
+	clk_put(pcm->pclk);
+	clk_put(pcm->cclk);
+
+	return 0;
+}
+
+static struct platform_driver s3c_pcm_driver = {
+	.probe  = s3c_pcm_dev_probe,
+	.remove = s3c_pcm_dev_remove,
+	.driver = {
+		.name = "samsung-pcm",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init s3c_pcm_init(void)
+{
+	return platform_driver_register(&s3c_pcm_driver);
+}
+module_init(s3c_pcm_init);
+
+static void __exit s3c_pcm_exit(void)
+{
+	platform_driver_unregister(&s3c_pcm_driver);
+}
+module_exit(s3c_pcm_exit);
+
+/* Module information */
+MODULE_AUTHOR("Jaswinder Singh, <jassi.brar@samsung.com>");
+MODULE_DESCRIPTION("S3C PCM Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-pcm");
diff --git a/sound/soc/s3c24xx/pcm.h b/sound/soc/s3c24xx/pcm.h
new file mode 100644
index 0000000..3775216
--- /dev/null
+++ b/sound/soc/s3c24xx/pcm.h
@@ -0,0 +1,124 @@
+/*  sound/soc/s3c24xx/pcm.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __S3C_PCM_H
+#define __S3C_PCM_H __FILE__
+
+/*Register Offsets */
+#define S3C_PCM_CTL	(0x00)
+#define S3C_PCM_CLKCTL	(0x04)
+#define S3C_PCM_TXFIFO	(0x08)
+#define S3C_PCM_RXFIFO	(0x0C)
+#define S3C_PCM_IRQCTL	(0x10)
+#define S3C_PCM_IRQSTAT	(0x14)
+#define S3C_PCM_FIFOSTAT	(0x18)
+#define S3C_PCM_CLRINT	(0x20)
+
+/* PCM_CTL Bit-Fields */
+#define S3C_PCM_CTL_TXDIPSTICK_MASK		(0x3f)
+#define S3C_PCM_CTL_TXDIPSTICK_SHIFT	(13)
+#define S3C_PCM_CTL_RXDIPSTICK_MASK		(0x3f)
+#define S3C_PCM_CTL_RXDIPSTICK_SHIFT	(7)
+#define S3C_PCM_CTL_TXDMA_EN		(0x1<<6)
+#define S3C_PCM_CTL_RXDMA_EN		(0x1<<5)
+#define S3C_PCM_CTL_TXMSB_AFTER_FSYNC	(0x1<<4)
+#define S3C_PCM_CTL_RXMSB_AFTER_FSYNC	(0x1<<3)
+#define S3C_PCM_CTL_TXFIFO_EN		(0x1<<2)
+#define S3C_PCM_CTL_RXFIFO_EN		(0x1<<1)
+#define S3C_PCM_CTL_ENABLE			(0x1<<0)
+
+/* PCM_CLKCTL Bit-Fields */
+#define S3C_PCM_CLKCTL_SERCLK_EN		(0x1<<19)
+#define S3C_PCM_CLKCTL_SERCLKSEL_PCLK	(0x1<<18)
+#define S3C_PCM_CLKCTL_SCLKDIV_MASK		(0x1ff)
+#define S3C_PCM_CLKCTL_SYNCDIV_MASK		(0x1ff)
+#define S3C_PCM_CLKCTL_SCLKDIV_SHIFT	(9)
+#define S3C_PCM_CLKCTL_SYNCDIV_SHIFT	(0)
+
+/* PCM_TXFIFO Bit-Fields */
+#define S3C_PCM_TXFIFO_DVALID	(0x1<<16)
+#define S3C_PCM_TXFIFO_DATA_MSK	(0xffff<<0)
+
+/* PCM_RXFIFO Bit-Fields */
+#define S3C_PCM_RXFIFO_DVALID	(0x1<<16)
+#define S3C_PCM_RXFIFO_DATA_MSK	(0xffff<<0)
+
+/* PCM_IRQCTL Bit-Fields */
+#define S3C_PCM_IRQCTL_IRQEN		(0x1<<14)
+#define S3C_PCM_IRQCTL_WRDEN		(0x1<<12)
+#define S3C_PCM_IRQCTL_TXEMPTYEN		(0x1<<11)
+#define S3C_PCM_IRQCTL_TXALMSTEMPTYEN	(0x1<<10)
+#define S3C_PCM_IRQCTL_TXFULLEN		(0x1<<9)
+#define S3C_PCM_IRQCTL_TXALMSTFULLEN	(0x1<<8)
+#define S3C_PCM_IRQCTL_TXSTARVEN		(0x1<<7)
+#define S3C_PCM_IRQCTL_TXERROVRFLEN		(0x1<<6)
+#define S3C_PCM_IRQCTL_RXEMPTEN		(0x1<<5)
+#define S3C_PCM_IRQCTL_RXALMSTEMPTEN	(0x1<<4)
+#define S3C_PCM_IRQCTL_RXFULLEN		(0x1<<3)
+#define S3C_PCM_IRQCTL_RXALMSTFULLEN	(0x1<<2)
+#define S3C_PCM_IRQCTL_RXSTARVEN		(0x1<<1)
+#define S3C_PCM_IRQCTL_RXERROVRFLEN		(0x1<<0)
+
+/* PCM_IRQSTAT Bit-Fields */
+#define S3C_PCM_IRQSTAT_IRQPND		(0x1<<13)
+#define S3C_PCM_IRQSTAT_WRD_XFER		(0x1<<12)
+#define S3C_PCM_IRQSTAT_TXEMPTY		(0x1<<11)
+#define S3C_PCM_IRQSTAT_TXALMSTEMPTY	(0x1<<10)
+#define S3C_PCM_IRQSTAT_TXFULL		(0x1<<9)
+#define S3C_PCM_IRQSTAT_TXALMSTFULL		(0x1<<8)
+#define S3C_PCM_IRQSTAT_TXSTARV		(0x1<<7)
+#define S3C_PCM_IRQSTAT_TXERROVRFL		(0x1<<6)
+#define S3C_PCM_IRQSTAT_RXEMPT		(0x1<<5)
+#define S3C_PCM_IRQSTAT_RXALMSTEMPT		(0x1<<4)
+#define S3C_PCM_IRQSTAT_RXFULL		(0x1<<3)
+#define S3C_PCM_IRQSTAT_RXALMSTFULL		(0x1<<2)
+#define S3C_PCM_IRQSTAT_RXSTARV		(0x1<<1)
+#define S3C_PCM_IRQSTAT_RXERROVRFL		(0x1<<0)
+
+/* PCM_FIFOSTAT Bit-Fields */
+#define S3C_PCM_FIFOSTAT_TXCNT_MSK		(0x3f<<14)
+#define S3C_PCM_FIFOSTAT_TXFIFOEMPTY	(0x1<<13)
+#define S3C_PCM_FIFOSTAT_TXFIFOALMSTEMPTY	(0x1<<12)
+#define S3C_PCM_FIFOSTAT_TXFIFOFULL		(0x1<<11)
+#define S3C_PCM_FIFOSTAT_TXFIFOALMSTFULL	(0x1<<10)
+#define S3C_PCM_FIFOSTAT_RXCNT_MSK		(0x3f<<4)
+#define S3C_PCM_FIFOSTAT_RXFIFOEMPTY	(0x1<<3)
+#define S3C_PCM_FIFOSTAT_RXFIFOALMSTEMPTY	(0x1<<2)
+#define S3C_PCM_FIFOSTAT_RXFIFOFULL		(0x1<<1)
+#define S3C_PCM_FIFOSTAT_RXFIFOALMSTFULL	(0x1<<0)
+
+#define S3C_PCM_CLKSRC_PCLK	0
+#define S3C_PCM_CLKSRC_MUX	1
+
+#define S3C_PCM_SCLK_PER_FS	0
+
+/**
+ * struct s3c_pcm_info - S3C PCM Controller information
+ * @dev: The parent device passed to use from the probe.
+ * @regs: The pointer to the device register block.
+ * @dma_playback: DMA information for playback channel.
+ * @dma_capture: DMA information for capture channel.
+ */
+struct s3c_pcm_info {
+	spinlock_t lock;
+	struct device	*dev;
+	void __iomem	*regs;
+
+	unsigned int sclk_per_fs;
+
+	/* Whether to keep PCMSCLK enabled even when idle(no active xfer) */
+	unsigned int idleclk;
+
+	struct clk	*pclk;
+	struct clk	*cclk;
+
+	struct s3c_dma_params	*dma_playback;
+	struct s3c_dma_params	*dma_capture;
+};
+
+#endif /* __S3C_PCM_H */
diff --git a/sound/soc/s3c24xx/s3c-pcm.c b/sound/soc/s3c24xx/s3c-pcm.c
deleted file mode 100644
index e111d23..0000000
--- a/sound/soc/s3c24xx/s3c-pcm.c
+++ /dev/null
@@ -1,552 +0,0 @@
-/* sound/soc/s3c24xx/s3c-pcm.c
- *
- * ALSA SoC Audio Layer - S3C PCM-Controller driver
- *
- * Copyright (c) 2009 Samsung Electronics Co. Ltd
- * Author: Jaswinder Singh <jassi.brar@samsung.com>
- * based upon I2S drivers by Ben Dooks.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-
-#include <plat/audio.h>
-#include <plat/dma.h>
-
-#include "dma.h"
-#include "s3c-pcm.h"
-
-static struct s3c2410_dma_client s3c_pcm_dma_client_out = {
-	.name		= "PCM Stereo out"
-};
-
-static struct s3c2410_dma_client s3c_pcm_dma_client_in = {
-	.name		= "PCM Stereo in"
-};
-
-static struct s3c_dma_params s3c_pcm_stereo_out[] = {
-	[0] = {
-		.client		= &s3c_pcm_dma_client_out,
-		.dma_size	= 4,
-	},
-	[1] = {
-		.client		= &s3c_pcm_dma_client_out,
-		.dma_size	= 4,
-	},
-};
-
-static struct s3c_dma_params s3c_pcm_stereo_in[] = {
-	[0] = {
-		.client		= &s3c_pcm_dma_client_in,
-		.dma_size	= 4,
-	},
-	[1] = {
-		.client		= &s3c_pcm_dma_client_in,
-		.dma_size	= 4,
-	},
-};
-
-static struct s3c_pcm_info s3c_pcm[2];
-
-static void s3c_pcm_snd_txctrl(struct s3c_pcm_info *pcm, int on)
-{
-	void __iomem *regs = pcm->regs;
-	u32 ctl, clkctl;
-
-	clkctl = readl(regs + S3C_PCM_CLKCTL);
-	ctl = readl(regs + S3C_PCM_CTL);
-	ctl &= ~(S3C_PCM_CTL_TXDIPSTICK_MASK
-			 << S3C_PCM_CTL_TXDIPSTICK_SHIFT);
-
-	if (on) {
-		ctl |= S3C_PCM_CTL_TXDMA_EN;
-		ctl |= S3C_PCM_CTL_TXFIFO_EN;
-		ctl |= S3C_PCM_CTL_ENABLE;
-		ctl |= (0x4<<S3C_PCM_CTL_TXDIPSTICK_SHIFT);
-		clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
-	} else {
-		ctl &= ~S3C_PCM_CTL_TXDMA_EN;
-		ctl &= ~S3C_PCM_CTL_TXFIFO_EN;
-
-		if (!(ctl & S3C_PCM_CTL_RXFIFO_EN)) {
-			ctl &= ~S3C_PCM_CTL_ENABLE;
-			if (!pcm->idleclk)
-				clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
-		}
-	}
-
-	writel(clkctl, regs + S3C_PCM_CLKCTL);
-	writel(ctl, regs + S3C_PCM_CTL);
-}
-
-static void s3c_pcm_snd_rxctrl(struct s3c_pcm_info *pcm, int on)
-{
-	void __iomem *regs = pcm->regs;
-	u32 ctl, clkctl;
-
-	ctl = readl(regs + S3C_PCM_CTL);
-	clkctl = readl(regs + S3C_PCM_CLKCTL);
-	ctl &= ~(S3C_PCM_CTL_RXDIPSTICK_MASK
-			 << S3C_PCM_CTL_RXDIPSTICK_SHIFT);
-
-	if (on) {
-		ctl |= S3C_PCM_CTL_RXDMA_EN;
-		ctl |= S3C_PCM_CTL_RXFIFO_EN;
-		ctl |= S3C_PCM_CTL_ENABLE;
-		ctl |= (0x20<<S3C_PCM_CTL_RXDIPSTICK_SHIFT);
-		clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
-	} else {
-		ctl &= ~S3C_PCM_CTL_RXDMA_EN;
-		ctl &= ~S3C_PCM_CTL_RXFIFO_EN;
-
-		if (!(ctl & S3C_PCM_CTL_TXFIFO_EN)) {
-			ctl &= ~S3C_PCM_CTL_ENABLE;
-			if (!pcm->idleclk)
-				clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
-		}
-	}
-
-	writel(clkctl, regs + S3C_PCM_CLKCTL);
-	writel(ctl, regs + S3C_PCM_CTL);
-}
-
-static int s3c_pcm_trigger(struct snd_pcm_substream *substream, int cmd,
-			       struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(rtd->cpu_dai);
-	unsigned long flags;
-
-	dev_dbg(pcm->dev, "Entered %s\n", __func__);
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-	case SNDRV_PCM_TRIGGER_RESUME:
-	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		spin_lock_irqsave(&pcm->lock, flags);
-
-		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
-			s3c_pcm_snd_rxctrl(pcm, 1);
-		else
-			s3c_pcm_snd_txctrl(pcm, 1);
-
-		spin_unlock_irqrestore(&pcm->lock, flags);
-		break;
-
-	case SNDRV_PCM_TRIGGER_STOP:
-	case SNDRV_PCM_TRIGGER_SUSPEND:
-	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		spin_lock_irqsave(&pcm->lock, flags);
-
-		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
-			s3c_pcm_snd_rxctrl(pcm, 0);
-		else
-			s3c_pcm_snd_txctrl(pcm, 0);
-
-		spin_unlock_irqrestore(&pcm->lock, flags);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int s3c_pcm_hw_params(struct snd_pcm_substream *substream,
-				 struct snd_pcm_hw_params *params,
-				 struct snd_soc_dai *socdai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(rtd->cpu_dai);
-	struct s3c_dma_params *dma_data;
-	void __iomem *regs = pcm->regs;
-	struct clk *clk;
-	int sclk_div, sync_div;
-	unsigned long flags;
-	u32 clkctl;
-
-	dev_dbg(pcm->dev, "Entered %s\n", __func__);
-
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		dma_data = pcm->dma_playback;
-	else
-		dma_data = pcm->dma_capture;
-
-	snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data);
-
-	/* Strictly check for sample size */
-	switch (params_format(params)) {
-	case SNDRV_PCM_FORMAT_S16_LE:
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&pcm->lock, flags);
-
-	/* Get hold of the PCMSOURCE_CLK */
-	clkctl = readl(regs + S3C_PCM_CLKCTL);
-	if (clkctl & S3C_PCM_CLKCTL_SERCLKSEL_PCLK)
-		clk = pcm->pclk;
-	else
-		clk = pcm->cclk;
-
-	/* Set the SCLK divider */
-	sclk_div = clk_get_rate(clk) / pcm->sclk_per_fs /
-					params_rate(params) / 2 - 1;
-
-	clkctl &= ~(S3C_PCM_CLKCTL_SCLKDIV_MASK
-			<< S3C_PCM_CLKCTL_SCLKDIV_SHIFT);
-	clkctl |= ((sclk_div & S3C_PCM_CLKCTL_SCLKDIV_MASK)
-			<< S3C_PCM_CLKCTL_SCLKDIV_SHIFT);
-
-	/* Set the SYNC divider */
-	sync_div = pcm->sclk_per_fs - 1;
-
-	clkctl &= ~(S3C_PCM_CLKCTL_SYNCDIV_MASK
-				<< S3C_PCM_CLKCTL_SYNCDIV_SHIFT);
-	clkctl |= ((sync_div & S3C_PCM_CLKCTL_SYNCDIV_MASK)
-				<< S3C_PCM_CLKCTL_SYNCDIV_SHIFT);
-
-	writel(clkctl, regs + S3C_PCM_CLKCTL);
-
-	spin_unlock_irqrestore(&pcm->lock, flags);
-
-	dev_dbg(pcm->dev, "PCMSOURCE_CLK-%lu SCLK=%ufs SCLK_DIV=%d SYNC_DIV=%d\n",
-				clk_get_rate(clk), pcm->sclk_per_fs,
-				sclk_div, sync_div);
-
-	return 0;
-}
-
-static int s3c_pcm_set_fmt(struct snd_soc_dai *cpu_dai,
-			       unsigned int fmt)
-{
-	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai);
-	void __iomem *regs = pcm->regs;
-	unsigned long flags;
-	int ret = 0;
-	u32 ctl;
-
-	dev_dbg(pcm->dev, "Entered %s\n", __func__);
-
-	spin_lock_irqsave(&pcm->lock, flags);
-
-	ctl = readl(regs + S3C_PCM_CTL);
-
-	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
-	case SND_SOC_DAIFMT_NB_NF:
-		/* Nothing to do, NB_NF by default */
-		break;
-	default:
-		dev_err(pcm->dev, "Unsupported clock inversion!\n");
-		ret = -EINVAL;
-		goto exit;
-	}
-
-	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
-	case SND_SOC_DAIFMT_CBS_CFS:
-		/* Nothing to do, Master by default */
-		break;
-	default:
-		dev_err(pcm->dev, "Unsupported master/slave format!\n");
-		ret = -EINVAL;
-		goto exit;
-	}
-
-	switch (fmt & SND_SOC_DAIFMT_CLOCK_MASK) {
-	case SND_SOC_DAIFMT_CONT:
-		pcm->idleclk = 1;
-		break;
-	case SND_SOC_DAIFMT_GATED:
-		pcm->idleclk = 0;
-		break;
-	default:
-		dev_err(pcm->dev, "Invalid Clock gating request!\n");
-		ret = -EINVAL;
-		goto exit;
-	}
-
-	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
-	case SND_SOC_DAIFMT_DSP_A:
-		ctl |= S3C_PCM_CTL_TXMSB_AFTER_FSYNC;
-		ctl |= S3C_PCM_CTL_RXMSB_AFTER_FSYNC;
-		break;
-	case SND_SOC_DAIFMT_DSP_B:
-		ctl &= ~S3C_PCM_CTL_TXMSB_AFTER_FSYNC;
-		ctl &= ~S3C_PCM_CTL_RXMSB_AFTER_FSYNC;
-		break;
-	default:
-		dev_err(pcm->dev, "Unsupported data format!\n");
-		ret = -EINVAL;
-		goto exit;
-	}
-
-	writel(ctl, regs + S3C_PCM_CTL);
-
-exit:
-	spin_unlock_irqrestore(&pcm->lock, flags);
-
-	return ret;
-}
-
-static int s3c_pcm_set_clkdiv(struct snd_soc_dai *cpu_dai,
-						int div_id, int div)
-{
-	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai);
-
-	switch (div_id) {
-	case S3C_PCM_SCLK_PER_FS:
-		pcm->sclk_per_fs = div;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int s3c_pcm_set_sysclk(struct snd_soc_dai *cpu_dai,
-				  int clk_id, unsigned int freq, int dir)
-{
-	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai);
-	void __iomem *regs = pcm->regs;
-	u32 clkctl = readl(regs + S3C_PCM_CLKCTL);
-
-	switch (clk_id) {
-	case S3C_PCM_CLKSRC_PCLK:
-		clkctl |= S3C_PCM_CLKCTL_SERCLKSEL_PCLK;
-		break;
-
-	case S3C_PCM_CLKSRC_MUX:
-		clkctl &= ~S3C_PCM_CLKCTL_SERCLKSEL_PCLK;
-
-		if (clk_get_rate(pcm->cclk) != freq)
-			clk_set_rate(pcm->cclk, freq);
-
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	writel(clkctl, regs + S3C_PCM_CLKCTL);
-
-	return 0;
-}
-
-static struct snd_soc_dai_ops s3c_pcm_dai_ops = {
-	.set_sysclk	= s3c_pcm_set_sysclk,
-	.set_clkdiv	= s3c_pcm_set_clkdiv,
-	.trigger	= s3c_pcm_trigger,
-	.hw_params	= s3c_pcm_hw_params,
-	.set_fmt	= s3c_pcm_set_fmt,
-};
-
-#define S3C_PCM_RATES  SNDRV_PCM_RATE_8000_96000
-
-#define S3C_PCM_DAI_DECLARE			\
-	.symmetric_rates = 1,					\
-	.ops = &s3c_pcm_dai_ops,				\
-	.playback = {						\
-		.channels_min	= 2,				\
-		.channels_max	= 2,				\
-		.rates		= S3C_PCM_RATES,		\
-		.formats	= SNDRV_PCM_FMTBIT_S16_LE,	\
-	},							\
-	.capture = {						\
-		.channels_min	= 2,				\
-		.channels_max	= 2,				\
-		.rates		= S3C_PCM_RATES,		\
-		.formats	= SNDRV_PCM_FMTBIT_S16_LE,	\
-	}
-
-struct snd_soc_dai_driver s3c_pcm_dai[] = {
-	[0] = {
-		.name	= "samsung-pcm.0",
-		S3C_PCM_DAI_DECLARE,
-	},
-	[1] = {
-		.name	= "samsung-pcm.1",
-		S3C_PCM_DAI_DECLARE,
-	},
-};
-EXPORT_SYMBOL_GPL(s3c_pcm_dai);
-
-static __devinit int s3c_pcm_dev_probe(struct platform_device *pdev)
-{
-	struct s3c_pcm_info *pcm;
-	struct resource *mem_res, *dmatx_res, *dmarx_res;
-	struct s3c_audio_pdata *pcm_pdata;
-	int ret;
-
-	/* Check for valid device index */
-	if ((pdev->id < 0) || pdev->id >= ARRAY_SIZE(s3c_pcm)) {
-		dev_err(&pdev->dev, "id %d out of range\n", pdev->id);
-		return -EINVAL;
-	}
-
-	pcm_pdata = pdev->dev.platform_data;
-
-	/* Check for availability of necessary resource */
-	dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	if (!dmatx_res) {
-		dev_err(&pdev->dev, "Unable to get PCM-TX dma resource\n");
-		return -ENXIO;
-	}
-
-	dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-	if (!dmarx_res) {
-		dev_err(&pdev->dev, "Unable to get PCM-RX dma resource\n");
-		return -ENXIO;
-	}
-
-	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem_res) {
-		dev_err(&pdev->dev, "Unable to get register resource\n");
-		return -ENXIO;
-	}
-
-	if (pcm_pdata && pcm_pdata->cfg_gpio && pcm_pdata->cfg_gpio(pdev)) {
-		dev_err(&pdev->dev, "Unable to configure gpio\n");
-		return -EINVAL;
-	}
-
-	pcm = &s3c_pcm[pdev->id];
-	pcm->dev = &pdev->dev;
-
-	spin_lock_init(&pcm->lock);
-
-	/* Default is 128fs */
-	pcm->sclk_per_fs = 128;
-
-	pcm->cclk = clk_get(&pdev->dev, "audio-bus");
-	if (IS_ERR(pcm->cclk)) {
-		dev_err(&pdev->dev, "failed to get audio-bus\n");
-		ret = PTR_ERR(pcm->cclk);
-		goto err1;
-	}
-	clk_enable(pcm->cclk);
-
-	/* record our pcm structure for later use in the callbacks */
-	dev_set_drvdata(&pdev->dev, pcm);
-
-	if (!request_mem_region(mem_res->start,
-				resource_size(mem_res), "samsung-pcm")) {
-		dev_err(&pdev->dev, "Unable to request register region\n");
-		ret = -EBUSY;
-		goto err2;
-	}
-
-	pcm->regs = ioremap(mem_res->start, 0x100);
-	if (pcm->regs == NULL) {
-		dev_err(&pdev->dev, "cannot ioremap registers\n");
-		ret = -ENXIO;
-		goto err3;
-	}
-
-	pcm->pclk = clk_get(&pdev->dev, "pcm");
-	if (IS_ERR(pcm->pclk)) {
-		dev_err(&pdev->dev, "failed to get pcm_clock\n");
-		ret = -ENOENT;
-		goto err4;
-	}
-	clk_enable(pcm->pclk);
-
-	ret = snd_soc_register_dai(&pdev->dev, &s3c_pcm_dai[pdev->id]);
-	if (ret != 0) {
-		dev_err(&pdev->dev, "failed to get pcm_clock\n");
-		goto err5;
-	}
-
-	s3c_pcm_stereo_in[pdev->id].dma_addr = mem_res->start
-							+ S3C_PCM_RXFIFO;
-	s3c_pcm_stereo_out[pdev->id].dma_addr = mem_res->start
-							+ S3C_PCM_TXFIFO;
-
-	s3c_pcm_stereo_in[pdev->id].channel = dmarx_res->start;
-	s3c_pcm_stereo_out[pdev->id].channel = dmatx_res->start;
-
-	pcm->dma_capture = &s3c_pcm_stereo_in[pdev->id];
-	pcm->dma_playback = &s3c_pcm_stereo_out[pdev->id];
-
-	return 0;
-
-err5:
-	clk_disable(pcm->pclk);
-	clk_put(pcm->pclk);
-err4:
-	iounmap(pcm->regs);
-err3:
-	release_mem_region(mem_res->start, resource_size(mem_res));
-err2:
-	clk_disable(pcm->cclk);
-	clk_put(pcm->cclk);
-err1:
-	return ret;
-}
-
-static __devexit int s3c_pcm_dev_remove(struct platform_device *pdev)
-{
-	struct s3c_pcm_info *pcm = &s3c_pcm[pdev->id];
-	struct resource *mem_res;
-
-	snd_soc_unregister_dai(&pdev->dev);
-
-	iounmap(pcm->regs);
-
-	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(mem_res->start, resource_size(mem_res));
-
-	clk_disable(pcm->cclk);
-	clk_disable(pcm->pclk);
-	clk_put(pcm->pclk);
-	clk_put(pcm->cclk);
-
-	return 0;
-}
-
-static struct platform_driver s3c_pcm_driver = {
-	.probe  = s3c_pcm_dev_probe,
-	.remove = s3c_pcm_dev_remove,
-	.driver = {
-		.name = "samsung-pcm",
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init s3c_pcm_init(void)
-{
-	return platform_driver_register(&s3c_pcm_driver);
-}
-module_init(s3c_pcm_init);
-
-static void __exit s3c_pcm_exit(void)
-{
-	platform_driver_unregister(&s3c_pcm_driver);
-}
-module_exit(s3c_pcm_exit);
-
-/* Module information */
-MODULE_AUTHOR("Jaswinder Singh, <jassi.brar@samsung.com>");
-MODULE_DESCRIPTION("S3C PCM Controller Driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:samsung-pcm");
diff --git a/sound/soc/s3c24xx/s3c-pcm.h b/sound/soc/s3c24xx/s3c-pcm.h
deleted file mode 100644
index f60baa1..0000000
--- a/sound/soc/s3c24xx/s3c-pcm.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*  sound/soc/s3c24xx/s3c-pcm.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __S3C_PCM_H
-#define __S3C_PCM_H __FILE__
-
-/*Register Offsets */
-#define S3C_PCM_CTL	(0x00)
-#define S3C_PCM_CLKCTL	(0x04)
-#define S3C_PCM_TXFIFO	(0x08)
-#define S3C_PCM_RXFIFO	(0x0C)
-#define S3C_PCM_IRQCTL	(0x10)
-#define S3C_PCM_IRQSTAT	(0x14)
-#define S3C_PCM_FIFOSTAT	(0x18)
-#define S3C_PCM_CLRINT	(0x20)
-
-/* PCM_CTL Bit-Fields */
-#define S3C_PCM_CTL_TXDIPSTICK_MASK		(0x3f)
-#define S3C_PCM_CTL_TXDIPSTICK_SHIFT	(13)
-#define S3C_PCM_CTL_RXDIPSTICK_MASK		(0x3f)
-#define S3C_PCM_CTL_RXDIPSTICK_SHIFT	(7)
-#define S3C_PCM_CTL_TXDMA_EN		(0x1<<6)
-#define S3C_PCM_CTL_RXDMA_EN		(0x1<<5)
-#define S3C_PCM_CTL_TXMSB_AFTER_FSYNC	(0x1<<4)
-#define S3C_PCM_CTL_RXMSB_AFTER_FSYNC	(0x1<<3)
-#define S3C_PCM_CTL_TXFIFO_EN		(0x1<<2)
-#define S3C_PCM_CTL_RXFIFO_EN		(0x1<<1)
-#define S3C_PCM_CTL_ENABLE			(0x1<<0)
-
-/* PCM_CLKCTL Bit-Fields */
-#define S3C_PCM_CLKCTL_SERCLK_EN		(0x1<<19)
-#define S3C_PCM_CLKCTL_SERCLKSEL_PCLK	(0x1<<18)
-#define S3C_PCM_CLKCTL_SCLKDIV_MASK		(0x1ff)
-#define S3C_PCM_CLKCTL_SYNCDIV_MASK		(0x1ff)
-#define S3C_PCM_CLKCTL_SCLKDIV_SHIFT	(9)
-#define S3C_PCM_CLKCTL_SYNCDIV_SHIFT	(0)
-
-/* PCM_TXFIFO Bit-Fields */
-#define S3C_PCM_TXFIFO_DVALID	(0x1<<16)
-#define S3C_PCM_TXFIFO_DATA_MSK	(0xffff<<0)
-
-/* PCM_RXFIFO Bit-Fields */
-#define S3C_PCM_RXFIFO_DVALID	(0x1<<16)
-#define S3C_PCM_RXFIFO_DATA_MSK	(0xffff<<0)
-
-/* PCM_IRQCTL Bit-Fields */
-#define S3C_PCM_IRQCTL_IRQEN		(0x1<<14)
-#define S3C_PCM_IRQCTL_WRDEN		(0x1<<12)
-#define S3C_PCM_IRQCTL_TXEMPTYEN		(0x1<<11)
-#define S3C_PCM_IRQCTL_TXALMSTEMPTYEN	(0x1<<10)
-#define S3C_PCM_IRQCTL_TXFULLEN		(0x1<<9)
-#define S3C_PCM_IRQCTL_TXALMSTFULLEN	(0x1<<8)
-#define S3C_PCM_IRQCTL_TXSTARVEN		(0x1<<7)
-#define S3C_PCM_IRQCTL_TXERROVRFLEN		(0x1<<6)
-#define S3C_PCM_IRQCTL_RXEMPTEN		(0x1<<5)
-#define S3C_PCM_IRQCTL_RXALMSTEMPTEN	(0x1<<4)
-#define S3C_PCM_IRQCTL_RXFULLEN		(0x1<<3)
-#define S3C_PCM_IRQCTL_RXALMSTFULLEN	(0x1<<2)
-#define S3C_PCM_IRQCTL_RXSTARVEN		(0x1<<1)
-#define S3C_PCM_IRQCTL_RXERROVRFLEN		(0x1<<0)
-
-/* PCM_IRQSTAT Bit-Fields */
-#define S3C_PCM_IRQSTAT_IRQPND		(0x1<<13)
-#define S3C_PCM_IRQSTAT_WRD_XFER		(0x1<<12)
-#define S3C_PCM_IRQSTAT_TXEMPTY		(0x1<<11)
-#define S3C_PCM_IRQSTAT_TXALMSTEMPTY	(0x1<<10)
-#define S3C_PCM_IRQSTAT_TXFULL		(0x1<<9)
-#define S3C_PCM_IRQSTAT_TXALMSTFULL		(0x1<<8)
-#define S3C_PCM_IRQSTAT_TXSTARV		(0x1<<7)
-#define S3C_PCM_IRQSTAT_TXERROVRFL		(0x1<<6)
-#define S3C_PCM_IRQSTAT_RXEMPT		(0x1<<5)
-#define S3C_PCM_IRQSTAT_RXALMSTEMPT		(0x1<<4)
-#define S3C_PCM_IRQSTAT_RXFULL		(0x1<<3)
-#define S3C_PCM_IRQSTAT_RXALMSTFULL		(0x1<<2)
-#define S3C_PCM_IRQSTAT_RXSTARV		(0x1<<1)
-#define S3C_PCM_IRQSTAT_RXERROVRFL		(0x1<<0)
-
-/* PCM_FIFOSTAT Bit-Fields */
-#define S3C_PCM_FIFOSTAT_TXCNT_MSK		(0x3f<<14)
-#define S3C_PCM_FIFOSTAT_TXFIFOEMPTY	(0x1<<13)
-#define S3C_PCM_FIFOSTAT_TXFIFOALMSTEMPTY	(0x1<<12)
-#define S3C_PCM_FIFOSTAT_TXFIFOFULL		(0x1<<11)
-#define S3C_PCM_FIFOSTAT_TXFIFOALMSTFULL	(0x1<<10)
-#define S3C_PCM_FIFOSTAT_RXCNT_MSK		(0x3f<<4)
-#define S3C_PCM_FIFOSTAT_RXFIFOEMPTY	(0x1<<3)
-#define S3C_PCM_FIFOSTAT_RXFIFOALMSTEMPTY	(0x1<<2)
-#define S3C_PCM_FIFOSTAT_RXFIFOFULL		(0x1<<1)
-#define S3C_PCM_FIFOSTAT_RXFIFOALMSTFULL	(0x1<<0)
-
-#define S3C_PCM_CLKSRC_PCLK	0
-#define S3C_PCM_CLKSRC_MUX	1
-
-#define S3C_PCM_SCLK_PER_FS	0
-
-/**
- * struct s3c_pcm_info - S3C PCM Controller information
- * @dev: The parent device passed to use from the probe.
- * @regs: The pointer to the device register block.
- * @dma_playback: DMA information for playback channel.
- * @dma_capture: DMA information for capture channel.
- */
-struct s3c_pcm_info {
-	spinlock_t lock;
-	struct device	*dev;
-	void __iomem	*regs;
-
-	unsigned int sclk_per_fs;
-
-	/* Whether to keep PCMSCLK enabled even when idle(no active xfer) */
-	unsigned int idleclk;
-
-	struct clk	*pclk;
-	struct clk	*cclk;
-
-	struct s3c_dma_params	*dma_playback;
-	struct s3c_dma_params	*dma_capture;
-};
-
-#endif /* __S3C_PCM_H */
-- 
1.6.2.5

[PATCH 09/25] ASoC: Samsung: Generalize DMA driver namespace

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Remove S3C,s3c from static defines.
	s3c_dma_ -> dma_
	s3c24xx_runtime_ -> runtime_
	s3c24xx_audio_ -> audio_
	s3c_preallocate_ -> preallocate_
	s3c24xx_soc_platform -> samsung_asoc_platform
	s3c24xx_pcm_driver -> asoc_dma_driver
	snd_s3c24xx_pcm_ -> samsung_asoc_

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 sound/soc/s3c24xx/dma.c |  124 +++++++++++++++++++++++-----------------------
 1 files changed, 62 insertions(+), 62 deletions(-)

diff --git a/sound/soc/s3c24xx/dma.c b/sound/soc/s3c24xx/dma.c
index b4c7c85..12622f3 100644
--- a/sound/soc/s3c24xx/dma.c
+++ b/sound/soc/s3c24xx/dma.c
@@ -32,7 +32,7 @@
 
 #include "dma.h"
 
-static const struct snd_pcm_hardware s3c_dma_hardware = {
+static const struct snd_pcm_hardware dma_hardware = {
 	.info			= SNDRV_PCM_INFO_INTERLEAVED |
 				    SNDRV_PCM_INFO_BLOCK_TRANSFER |
 				    SNDRV_PCM_INFO_MMAP |
@@ -53,7 +53,7 @@ static const struct snd_pcm_hardware s3c_dma_hardware = {
 	.fifo_size		= 32,
 };
 
-struct s3c24xx_runtime_data {
+struct runtime_data {
 	spinlock_t lock;
 	int state;
 	unsigned int dma_loaded;
@@ -65,14 +65,14 @@ struct s3c24xx_runtime_data {
 	struct s3c_dma_params *params;
 };
 
-/* s3c_dma_enqueue
+/* dma_enqueue
  *
  * place a dma buffer onto the queue for the dma system
  * to handle.
 */
-static void s3c_dma_enqueue(struct snd_pcm_substream *substream)
+static void dma_enqueue(struct snd_pcm_substream *substream)
 {
-	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
+	struct runtime_data *prtd = substream->runtime->private_data;
 	dma_addr_t pos = prtd->dma_pos;
 	unsigned int limit;
 	int ret;
@@ -113,12 +113,12 @@ static void s3c_dma_enqueue(struct snd_pcm_substream *substream)
 	prtd->dma_pos = pos;
 }
 
-static void s3c24xx_audio_buffdone(struct s3c2410_dma_chan *channel,
+static void audio_buffdone(struct s3c2410_dma_chan *channel,
 				void *dev_id, int size,
 				enum s3c2410_dma_buffresult result)
 {
 	struct snd_pcm_substream *substream = dev_id;
-	struct s3c24xx_runtime_data *prtd;
+	struct runtime_data *prtd;
 
 	pr_debug("Entered %s\n", __func__);
 
@@ -133,17 +133,17 @@ static void s3c24xx_audio_buffdone(struct s3c2410_dma_chan *channel,
 	spin_lock(&prtd->lock);
 	if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) {
 		prtd->dma_loaded--;
-		s3c_dma_enqueue(substream);
+		dma_enqueue(substream);
 	}
 
 	spin_unlock(&prtd->lock);
 }
 
-static int s3c_dma_hw_params(struct snd_pcm_substream *substream,
+static int dma_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct s3c24xx_runtime_data *prtd = runtime->private_data;
+	struct runtime_data *prtd = runtime->private_data;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	unsigned long totbytes = params_buffer_bytes(params);
 	struct s3c_dma_params *dma =
@@ -182,7 +182,7 @@ static int s3c_dma_hw_params(struct snd_pcm_substream *substream,
 	}
 
 	s3c2410_dma_set_buffdone_fn(prtd->params->channel,
-				    s3c24xx_audio_buffdone);
+				    audio_buffdone);
 
 	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
 
@@ -200,9 +200,9 @@ static int s3c_dma_hw_params(struct snd_pcm_substream *substream,
 	return 0;
 }
 
-static int s3c_dma_hw_free(struct snd_pcm_substream *substream)
+static int dma_hw_free(struct snd_pcm_substream *substream)
 {
-	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
+	struct runtime_data *prtd = substream->runtime->private_data;
 
 	pr_debug("Entered %s\n", __func__);
 
@@ -217,9 +217,9 @@ static int s3c_dma_hw_free(struct snd_pcm_substream *substream)
 	return 0;
 }
 
-static int s3c_dma_prepare(struct snd_pcm_substream *substream)
+static int dma_prepare(struct snd_pcm_substream *substream)
 {
-	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
+	struct runtime_data *prtd = substream->runtime->private_data;
 	int ret = 0;
 
 	pr_debug("Entered %s\n", __func__);
@@ -250,14 +250,14 @@ static int s3c_dma_prepare(struct snd_pcm_substream *substream)
 	prtd->dma_pos = prtd->dma_start;
 
 	/* enqueue dma buffers */
-	s3c_dma_enqueue(substream);
+	dma_enqueue(substream);
 
 	return ret;
 }
 
-static int s3c_dma_trigger(struct snd_pcm_substream *substream, int cmd)
+static int dma_trigger(struct snd_pcm_substream *substream, int cmd)
 {
-	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
+	struct runtime_data *prtd = substream->runtime->private_data;
 	int ret = 0;
 
 	pr_debug("Entered %s\n", __func__);
@@ -290,10 +290,10 @@ static int s3c_dma_trigger(struct snd_pcm_substream *substream, int cmd)
 }
 
 static snd_pcm_uframes_t
-s3c_dma_pointer(struct snd_pcm_substream *substream)
+dma_pointer(struct snd_pcm_substream *substream)
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct s3c24xx_runtime_data *prtd = runtime->private_data;
+	struct runtime_data *prtd = runtime->private_data;
 	unsigned long res;
 	dma_addr_t src, dst;
 
@@ -325,17 +325,17 @@ s3c_dma_pointer(struct snd_pcm_substream *substream)
 	return bytes_to_frames(substream->runtime, res);
 }
 
-static int s3c_dma_open(struct snd_pcm_substream *substream)
+static int dma_open(struct snd_pcm_substream *substream)
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct s3c24xx_runtime_data *prtd;
+	struct runtime_data *prtd;
 
 	pr_debug("Entered %s\n", __func__);
 
 	snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
-	snd_soc_set_runtime_hwparams(substream, &s3c_dma_hardware);
+	snd_soc_set_runtime_hwparams(substream, &dma_hardware);
 
-	prtd = kzalloc(sizeof(struct s3c24xx_runtime_data), GFP_KERNEL);
+	prtd = kzalloc(sizeof(struct runtime_data), GFP_KERNEL);
 	if (prtd == NULL)
 		return -ENOMEM;
 
@@ -345,22 +345,22 @@ static int s3c_dma_open(struct snd_pcm_substream *substream)
 	return 0;
 }
 
-static int s3c_dma_close(struct snd_pcm_substream *substream)
+static int dma_close(struct snd_pcm_substream *substream)
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct s3c24xx_runtime_data *prtd = runtime->private_data;
+	struct runtime_data *prtd = runtime->private_data;
 
 	pr_debug("Entered %s\n", __func__);
 
 	if (!prtd)
-		pr_debug("s3c_dma_close called with prtd == NULL\n");
+		pr_debug("dma_close called with prtd == NULL\n");
 
 	kfree(prtd);
 
 	return 0;
 }
 
-static int s3c_dma_mmap(struct snd_pcm_substream *substream,
+static int dma_mmap(struct snd_pcm_substream *substream,
 	struct vm_area_struct *vma)
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
@@ -373,23 +373,23 @@ static int s3c_dma_mmap(struct snd_pcm_substream *substream,
 				     runtime->dma_bytes);
 }
 
-static struct snd_pcm_ops s3c_dma_ops = {
-	.open		= s3c_dma_open,
-	.close		= s3c_dma_close,
+static struct snd_pcm_ops dma_ops = {
+	.open		= dma_open,
+	.close		= dma_close,
 	.ioctl		= snd_pcm_lib_ioctl,
-	.hw_params	= s3c_dma_hw_params,
-	.hw_free	= s3c_dma_hw_free,
-	.prepare	= s3c_dma_prepare,
-	.trigger	= s3c_dma_trigger,
-	.pointer	= s3c_dma_pointer,
-	.mmap		= s3c_dma_mmap,
+	.hw_params	= dma_hw_params,
+	.hw_free	= dma_hw_free,
+	.prepare	= dma_prepare,
+	.trigger	= dma_trigger,
+	.pointer	= dma_pointer,
+	.mmap		= dma_mmap,
 };
 
-static int s3c_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+static int preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
 {
 	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
 	struct snd_dma_buffer *buf = &substream->dma_buffer;
-	size_t size = s3c_dma_hardware.buffer_bytes_max;
+	size_t size = dma_hardware.buffer_bytes_max;
 
 	pr_debug("Entered %s\n", __func__);
 
@@ -404,7 +404,7 @@ static int s3c_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
 	return 0;
 }
 
-static void s3c_dma_free_dma_buffers(struct snd_pcm *pcm)
+static void dma_free_dma_buffers(struct snd_pcm *pcm)
 {
 	struct snd_pcm_substream *substream;
 	struct snd_dma_buffer *buf;
@@ -427,9 +427,9 @@ static void s3c_dma_free_dma_buffers(struct snd_pcm *pcm)
 	}
 }
 
-static u64 s3c_dma_mask = DMA_BIT_MASK(32);
+static u64 dma_mask = DMA_BIT_MASK(32);
 
-static int s3c_dma_new(struct snd_card *card,
+static int dma_new(struct snd_card *card,
 	struct snd_soc_dai *dai, struct snd_pcm *pcm)
 {
 	int ret = 0;
@@ -437,19 +437,19 @@ static int s3c_dma_new(struct snd_card *card,
 	pr_debug("Entered %s\n", __func__);
 
 	if (!card->dev->dma_mask)
-		card->dev->dma_mask = &s3c_dma_mask;
+		card->dev->dma_mask = &dma_mask;
 	if (!card->dev->coherent_dma_mask)
 		card->dev->coherent_dma_mask = 0xffffffff;
 
 	if (dai->driver->playback.channels_min) {
-		ret = s3c_preallocate_dma_buffer(pcm,
+		ret = preallocate_dma_buffer(pcm,
 			SNDRV_PCM_STREAM_PLAYBACK);
 		if (ret)
 			goto out;
 	}
 
 	if (dai->driver->capture.channels_min) {
-		ret = s3c_preallocate_dma_buffer(pcm,
+		ret = preallocate_dma_buffer(pcm,
 			SNDRV_PCM_STREAM_CAPTURE);
 		if (ret)
 			goto out;
@@ -458,46 +458,46 @@ out:
 	return ret;
 }
 
-static struct snd_soc_platform_driver s3c24xx_soc_platform = {
-	.ops		= &s3c_dma_ops,
-	.pcm_new	= s3c_dma_new,
-	.pcm_free	= s3c_dma_free_dma_buffers,
+static struct snd_soc_platform_driver samsung_asoc_platform = {
+	.ops		= &dma_ops,
+	.pcm_new	= dma_new,
+	.pcm_free	= dma_free_dma_buffers,
 };
 
-static int __devinit s3c24xx_soc_platform_probe(struct platform_device *pdev)
+static int __devinit samsung_asoc_platform_probe(struct platform_device *pdev)
 {
-	return snd_soc_register_platform(&pdev->dev, &s3c24xx_soc_platform);
+	return snd_soc_register_platform(&pdev->dev, &samsung_asoc_platform);
 }
 
-static int __devexit s3c24xx_soc_platform_remove(struct platform_device *pdev)
+static int __devexit samsung_asoc_platform_remove(struct platform_device *pdev)
 {
 	snd_soc_unregister_platform(&pdev->dev);
 	return 0;
 }
 
-static struct platform_driver s3c24xx_pcm_driver = {
+static struct platform_driver asoc_dma_driver = {
 	.driver = {
 		.name = "samsung-audio",
 		.owner = THIS_MODULE,
 	},
 
-	.probe = s3c24xx_soc_platform_probe,
-	.remove = __devexit_p(s3c24xx_soc_platform_remove),
+	.probe = samsung_asoc_platform_probe,
+	.remove = __devexit_p(samsung_asoc_platform_remove),
 };
 
-static int __init snd_s3c24xx_pcm_init(void)
+static int __init samsung_asoc_init(void)
 {
-	return platform_driver_register(&s3c24xx_pcm_driver);
+	return platform_driver_register(&asoc_dma_driver);
 }
-module_init(snd_s3c24xx_pcm_init);
+module_init(samsung_asoc_init);
 
-static void __exit snd_s3c24xx_pcm_exit(void)
+static void __exit samsung_asoc_exit(void)
 {
-	platform_driver_unregister(&s3c24xx_pcm_driver);
+	platform_driver_unregister(&asoc_dma_driver);
 }
-module_exit(snd_s3c24xx_pcm_exit);
+module_exit(samsung_asoc_exit);
 
 MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("Samsung S3C Audio DMA module");
+MODULE_DESCRIPTION("Samsung ASoC DMA Driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:samsung-audio");
-- 
1.6.2.5

[PATCH 10/25] ASoC: Samsung: Rename s3c64xx I2S device

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Since the I2S of S3C64XX and newer SoCs are incremental
versions of each other with changes managable in a single
driver, rename the 's3c64xx-iis' -> 'samsung-i2s'

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 arch/arm/mach-s3c64xx/dev-audio.c   |    6 +++---
 arch/arm/mach-s5p6440/dev-audio.c   |    2 +-
 arch/arm/mach-s5p6442/dev-audio.c   |    4 ++--
 arch/arm/mach-s5pc100/dev-audio.c   |    6 +++---
 arch/arm/mach-s5pv210/dev-audio.c   |    6 +++---
 sound/soc/s3c24xx/s3c64xx-i2s-v4.c  |    4 ++--
 sound/soc/s3c24xx/s3c64xx-i2s.c     |    4 ++--
 sound/soc/s3c24xx/smdk64xx_wm8580.c |    4 ++--
 8 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index 1615c94..01dda91 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -89,7 +89,7 @@ static struct s3c_audio_pdata s3c_i2s0_pdata = {
 };
 
 struct platform_device s3c64xx_device_iis0 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 0,
 	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
 	.resource	  = s3c64xx_iis0_resource,
@@ -122,7 +122,7 @@ static struct s3c_audio_pdata s3c_i2s1_pdata = {
 };
 
 struct platform_device s3c64xx_device_iis1 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 1,
 	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
 	.resource	  = s3c64xx_iis1_resource,
@@ -155,7 +155,7 @@ static struct s3c_audio_pdata s3c_i2sv4_pdata = {
 };
 
 struct platform_device s3c64xx_device_iisv4 = {
-	.name		  = "s3c64xx-iis-v4",
+	.name		  = "samsung-i2s-v4",
 	.id		  = -1,
 	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
 	.resource	  = s3c64xx_iisv4_resource,
diff --git a/arch/arm/mach-s5p6440/dev-audio.c b/arch/arm/mach-s5p6440/dev-audio.c
index 3ca0d2b..5d98629 100644
--- a/arch/arm/mach-s5p6440/dev-audio.c
+++ b/arch/arm/mach-s5p6440/dev-audio.c
@@ -64,7 +64,7 @@ static struct resource s5p6440_iis0_resource[] = {
 };
 
 struct platform_device s5p6440_device_iis = {
-	.name		  = "s3c64xx-iis-v4",
+	.name		  = "samsung-i2s-v4",
 	.id		  = -1,
 	.num_resources	  = ARRAY_SIZE(s5p6440_iis0_resource),
 	.resource	  = s5p6440_iis0_resource,
diff --git a/arch/arm/mach-s5p6442/dev-audio.c b/arch/arm/mach-s5p6442/dev-audio.c
index 7a4e347..1419442 100644
--- a/arch/arm/mach-s5p6442/dev-audio.c
+++ b/arch/arm/mach-s5p6442/dev-audio.c
@@ -70,7 +70,7 @@ static struct resource s5p6442_iis0_resource[] = {
 };
 
 struct platform_device s5p6442_device_iis0 = {
-	.name		  = "s3c64xx-iis-v4",
+	.name		  = "samsung-i2s-v4",
 	.id		  = -1,
 	.num_resources	  = ARRAY_SIZE(s5p6442_iis0_resource),
 	.resource	  = s5p6442_iis0_resource,
@@ -98,7 +98,7 @@ static struct resource s5p6442_iis1_resource[] = {
 };
 
 struct platform_device s5p6442_device_iis1 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 1,
 	.num_resources	  = ARRAY_SIZE(s5p6442_iis1_resource),
 	.resource	  = s5p6442_iis1_resource,
diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c
index 4207511..3cf22ff 100644
--- a/arch/arm/mach-s5pc100/dev-audio.c
+++ b/arch/arm/mach-s5pc100/dev-audio.c
@@ -73,7 +73,7 @@ static struct resource s5pc100_iis0_resource[] = {
 };
 
 struct platform_device s5pc100_device_iis0 = {
-	.name		  = "s3c64xx-iis-v4",
+	.name		  = "samsung-i2s-v4",
 	.id		  = -1,
 	.num_resources	  = ARRAY_SIZE(s5pc100_iis0_resource),
 	.resource	  = s5pc100_iis0_resource,
@@ -101,7 +101,7 @@ static struct resource s5pc100_iis1_resource[] = {
 };
 
 struct platform_device s5pc100_device_iis1 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 1,
 	.num_resources	  = ARRAY_SIZE(s5pc100_iis1_resource),
 	.resource	  = s5pc100_iis1_resource,
@@ -129,7 +129,7 @@ static struct resource s5pc100_iis2_resource[] = {
 };
 
 struct platform_device s5pc100_device_iis2 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 2,
 	.num_resources	  = ARRAY_SIZE(s5pc100_iis2_resource),
 	.resource	  = s5pc100_iis2_resource,
diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c
index e6db957..6e60041 100644
--- a/arch/arm/mach-s5pv210/dev-audio.c
+++ b/arch/arm/mach-s5pv210/dev-audio.c
@@ -80,7 +80,7 @@ static struct resource s5pv210_iis0_resource[] = {
 };
 
 struct platform_device s5pv210_device_iis0 = {
-	.name		  = "s3c64xx-iis-v4",
+	.name		  = "samsung-i2s-v4",
 	.id		  = -1,
 	.num_resources	  = ARRAY_SIZE(s5pv210_iis0_resource),
 	.resource	  = s5pv210_iis0_resource,
@@ -108,7 +108,7 @@ static struct resource s5pv210_iis1_resource[] = {
 };
 
 struct platform_device s5pv210_device_iis1 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 1,
 	.num_resources	  = ARRAY_SIZE(s5pv210_iis1_resource),
 	.resource	  = s5pv210_iis1_resource,
@@ -136,7 +136,7 @@ static struct resource s5pv210_iis2_resource[] = {
 };
 
 struct platform_device s5pv210_device_iis2 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 2,
 	.num_resources	  = ARRAY_SIZE(s5pv210_iis2_resource),
 	.resource	  = s5pv210_iis2_resource,
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s-v4.c b/sound/soc/s3c24xx/s3c64xx-i2s-v4.c
index 46b65d7..8a08041 100644
--- a/sound/soc/s3c24xx/s3c64xx-i2s-v4.c
+++ b/sound/soc/s3c24xx/s3c64xx-i2s-v4.c
@@ -206,7 +206,7 @@ static struct platform_driver s3c64xx_i2sv4_driver = {
 	.probe  = s3c64xx_i2sv4_dev_probe,
 	.remove = s3c64xx_i2sv4_dev_remove,
 	.driver = {
-		.name = "s3c64xx-iis-v4",
+		.name = "samsung-i2s-v4",
 		.owner = THIS_MODULE,
 	},
 };
@@ -227,4 +227,4 @@ module_exit(s3c64xx_i2sv4_exit);
 MODULE_AUTHOR("Jaswinder Singh, <jassi.brar@samsung.com>");
 MODULE_DESCRIPTION("S3C64XX I2Sv4 SoC Interface");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:s3c64xx-iis-v4");
+MODULE_ALIAS("platform:samsung-i2s-v4");
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c
index 0288d4e..0fefbb5 100644
--- a/sound/soc/s3c24xx/s3c64xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c64xx-i2s.c
@@ -218,7 +218,7 @@ static struct platform_driver s3c64xx_iis_driver = {
 	.probe  = s3c64xx_iis_dev_probe,
 	.remove = s3c64xx_iis_dev_remove,
 	.driver = {
-		.name = "s3c64xx-iis",
+		.name = "samsung-i2s",
 		.owner = THIS_MODULE,
 	},
 };
@@ -239,4 +239,4 @@ module_exit(s3c64xx_i2s_exit);
 MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
 MODULE_DESCRIPTION("S3C64XX I2S SoC Interface");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:s3c64xx-iis");
+MODULE_ALIAS("platform:samsung-i2s");
diff --git a/sound/soc/s3c24xx/smdk64xx_wm8580.c b/sound/soc/s3c24xx/smdk64xx_wm8580.c
index 9ddc964..1d59317 100644
--- a/sound/soc/s3c24xx/smdk64xx_wm8580.c
+++ b/sound/soc/s3c24xx/smdk64xx_wm8580.c
@@ -222,7 +222,7 @@ static struct snd_soc_dai_link smdk64xx_dai[] = {
 { /* Primary Playback i/f */
 	.name = "WM8580 PAIF RX",
 	.stream_name = "Playback",
-	.cpu_dai_name = "s3c64xx-iis-v4",
+	.cpu_dai_name = "samsung-i2s-v4",
 	.codec_dai_name = "wm8580-hifi-playback",
 	.platform_name = "samsung-audio",
 	.codec_name = "wm8580-codec.0-001b",
@@ -232,7 +232,7 @@ static struct snd_soc_dai_link smdk64xx_dai[] = {
 { /* Primary Capture i/f */
 	.name = "WM8580 PAIF TX",
 	.stream_name = "Capture",
-	.cpu_dai_name = "s3c64xx-iis-v4",
+	.cpu_dai_name = "samsung-i2s-v4",
 	.codec_dai_name = "wm8580-hifi-capture",
 	.platform_name = "samsung-audio",
 	.codec_name = "wm8580-codec.0-001b",
-- 
1.6.2.5

[PATCH 11/25] ASoC: Samsung: Add common I2S driver

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

The I2S controllers since S3C64XX are incremental revisions, with
a new feature added to the last one. The programming i/f doesn't
conflict between these revisions, so it is possible to have one
common driver that could manage various versions of I2S (v3, 4 & 5)

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 arch/arm/plat-samsung/include/plat/audio.h |   24 +
 sound/soc/s3c24xx/Kconfig                  |    3 +
 sound/soc/s3c24xx/Makefile                 |    2 +
 sound/soc/s3c24xx/i2s.c                    | 1251 ++++++++++++++++++++++++++++
 sound/soc/s3c24xx/i2s.h                    |   29 +
 5 files changed, 1309 insertions(+), 0 deletions(-)
 create mode 100644 sound/soc/s3c24xx/i2s.c
 create mode 100644 sound/soc/s3c24xx/i2s.h

diff --git a/arch/arm/plat-samsung/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h
index e32f9ed..b72ad03 100644
--- a/arch/arm/plat-samsung/include/plat/audio.h
+++ b/arch/arm/plat-samsung/include/plat/audio.h
@@ -16,10 +16,34 @@
 #define S3C64XX_AC97_GPE  1
 extern void s3c64xx_ac97_setup_gpio(int);
 
+struct samsung_i2s {
+/* If the Primary DAI has 5.1 Channels */
+#define QUIRK_PRI_6CHAN		(1 << 0)
+/* If the I2S block has a Stereo Overlay Channel */
+#define QUIRK_SEC_DAI		(1 << 1)
+/*
+ * If the I2S block has no internal prescalar or MUX (I2SMOD[10] bit)
+ * The Machine driver must provide suitably set clock to the I2S block.
+ */
+#define QUIRK_NO_MUXPSR		(1 << 2)
+#define QUIRK_NEED_RSTCLR	(1 << 3)
+	/* Quirks of the I2S controller */
+	u32 quirks;
+
+	/*
+	 * Array of clock names that can be used to generate I2S signals.
+	 * Also corresponds to clocks of I2SMOD[10]
+	 */
+	const char **src_clk;
+};
+
 /**
  * struct s3c_audio_pdata - common platform data for audio device drivers
  * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
  */
 struct s3c_audio_pdata {
 	int (*cfg_gpio)(struct platform_device *);
+	union {
+		struct samsung_i2s i2s;
+	} type;
 };
diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index 6efdf65..20fe288 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -40,6 +40,9 @@ config SND_S5P_SOC_SPDIF
 	tristate
 	select SND_SOC_SPDIF
 
+config SND_SAMSUNG_I2S
+	tristate
+
 config SND_S3C24XX_SOC_NEO1973_WM8753
 	tristate "SoC I2S Audio support for NEO1973 - WM8753"
 	depends on SND_S3C24XX_SOC && MACH_NEO1973_GTA01
diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile
index 93de2a0..1d6fc07 100644
--- a/sound/soc/s3c24xx/Makefile
+++ b/sound/soc/s3c24xx/Makefile
@@ -8,6 +8,7 @@ snd-soc-s3c64xx-i2s-v4-objs := s3c64xx-i2s-v4.o
 snd-soc-s3c-i2s-v2-objs := s3c-i2s-v2.o
 snd-soc-samsung-spdif-objs := spdif.o
 snd-soc-pcm-objs := pcm.o
+snd-soc-i2s-objs := i2s.o
 
 obj-$(CONFIG_SND_S3C24XX_SOC) += snd-soc-s3c24xx.o
 obj-$(CONFIG_SND_S3C24XX_SOC_I2S) += snd-soc-s3c24xx-i2s.o
@@ -18,6 +19,7 @@ obj-$(CONFIG_SND_S3C64XX_SOC_I2S_V4) += snd-soc-s3c64xx-i2s-v4.o
 obj-$(CONFIG_SND_S3C_I2SV2_SOC) += snd-soc-s3c-i2s-v2.o
 obj-$(CONFIG_SND_S5P_SOC_SPDIF) += snd-soc-samsung-spdif.o
 obj-$(CONFIG_SND_S3C_SOC_PCM) += snd-soc-pcm.o
+obj-$(CONFIG_SND_SAMSUNG_I2S) += snd-soc-i2s.o
 
 # S3C24XX Machine Support
 snd-soc-jive-wm8750-objs := jive_wm8750.o
diff --git a/sound/soc/s3c24xx/i2s.c b/sound/soc/s3c24xx/i2s.c
new file mode 100644
index 0000000..6869f51
--- /dev/null
+++ b/sound/soc/s3c24xx/i2s.c
@@ -0,0 +1,1251 @@
+/* sound/soc/s3c24xx/i2s.c
+ *
+ * ALSA SoC Audio Layer - Samsung I2S Controller driver
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <plat/audio.h>
+
+#include "dma.h"
+#include "i2s.h"
+
+#define I2SCON		0x0
+#define I2SMOD		0x4
+#define I2SFIC		0x8
+#define I2SPSR		0xc
+#define I2STXD		0x10
+#define I2SRXD		0x14
+#define I2SFICS		0x18
+#define I2STXDS		0x1c
+
+#define CON_RSTCLR		(1 << 31)
+#define CON_FRXOFSTATUS		(1 << 26)
+#define CON_FRXORINTEN		(1 << 25)
+#define CON_FTXSURSTAT		(1 << 24)
+#define CON_FTXSURINTEN		(1 << 23)
+#define CON_TXSDMA_PAUSE	(1 << 20)
+#define CON_TXSDMA_ACTIVE	(1 << 18)
+
+#define CON_FTXURSTATUS		(1 << 17)
+#define CON_FTXURINTEN		(1 << 16)
+#define CON_TXFIFO2_EMPTY	(1 << 15)
+#define CON_TXFIFO1_EMPTY	(1 << 14)
+#define CON_TXFIFO2_FULL	(1 << 13)
+#define CON_TXFIFO1_FULL	(1 << 12)
+
+#define CON_LRINDEX		(1 << 11)
+#define CON_TXFIFO_EMPTY	(1 << 10)
+#define CON_RXFIFO_EMPTY	(1 << 9)
+#define CON_TXFIFO_FULL		(1 << 8)
+#define CON_RXFIFO_FULL		(1 << 7)
+#define CON_TXDMA_PAUSE		(1 << 6)
+#define CON_RXDMA_PAUSE		(1 << 5)
+#define CON_TXCH_PAUSE		(1 << 4)
+#define CON_RXCH_PAUSE		(1 << 3)
+#define CON_TXDMA_ACTIVE	(1 << 2)
+#define CON_RXDMA_ACTIVE	(1 << 1)
+#define CON_ACTIVE		(1 << 0)
+
+#define MOD_OPCLK_CDCLK_OUT	(0 << 30)
+#define MOD_OPCLK_CDCLK_IN	(1 << 30)
+#define MOD_OPCLK_BCLK_OUT	(2 << 30)
+#define MOD_OPCLK_PCLK		(3 << 30)
+#define MOD_OPCLK_MASK		(3 << 30)
+#define MOD_TXS_IDMA		(1 << 28) /* Sec_TXFIFO use I-DMA */
+
+#define MOD_BLCS_SHIFT	26
+#define MOD_BLCS_16BIT	(0 << MOD_BLCS_SHIFT)
+#define MOD_BLCS_8BIT	(1 << MOD_BLCS_SHIFT)
+#define MOD_BLCS_24BIT	(2 << MOD_BLCS_SHIFT)
+#define MOD_BLCS_MASK	(3 << MOD_BLCS_SHIFT)
+#define MOD_BLCP_SHIFT	24
+#define MOD_BLCP_16BIT	(0 << MOD_BLCP_SHIFT)
+#define MOD_BLCP_8BIT	(1 << MOD_BLCP_SHIFT)
+#define MOD_BLCP_24BIT	(2 << MOD_BLCP_SHIFT)
+#define MOD_BLCP_MASK	(3 << MOD_BLCP_SHIFT)
+
+#define MOD_C2DD_HHALF		(1 << 21) /* Discard Higher-half */
+#define MOD_C2DD_LHALF		(1 << 20) /* Discard Lower-half */
+#define MOD_C1DD_HHALF		(1 << 19)
+#define MOD_C1DD_LHALF		(1 << 18)
+#define MOD_DC2_EN		(1 << 17)
+#define MOD_DC1_EN		(1 << 16)
+#define MOD_BLC_16BIT		(0 << 13)
+#define MOD_BLC_8BIT		(1 << 13)
+#define MOD_BLC_24BIT		(2 << 13)
+#define MOD_BLC_MASK		(3 << 13)
+
+#define MOD_IMS_SYSMUX		(1 << 10)
+#define MOD_SLAVE		(1 << 11)
+#define MOD_TXONLY		(0 << 8)
+#define MOD_RXONLY		(1 << 8)
+#define MOD_TXRX		(2 << 8)
+#define MOD_MASK		(3 << 8)
+#define MOD_LR_LLOW		(0 << 7)
+#define MOD_LR_RLOW		(1 << 7)
+#define MOD_SDF_IIS		(0 << 5)
+#define MOD_SDF_MSB		(1 << 5)
+#define MOD_SDF_LSB		(2 << 5)
+#define MOD_SDF_MASK		(3 << 5)
+#define MOD_RCLK_256FS		(0 << 3)
+#define MOD_RCLK_512FS		(1 << 3)
+#define MOD_RCLK_384FS		(2 << 3)
+#define MOD_RCLK_768FS		(3 << 3)
+#define MOD_RCLK_MASK		(3 << 3)
+#define MOD_BCLK_32FS		(0 << 1)
+#define MOD_BCLK_48FS		(1 << 1)
+#define MOD_BCLK_16FS		(2 << 1)
+#define MOD_BCLK_24FS		(3 << 1)
+#define MOD_BCLK_MASK		(3 << 1)
+#define MOD_8BIT		(1 << 0)
+
+#define MOD_CDCLKCON		(1 << 12)
+
+#define PSR_PSREN		(1 << 15)
+
+#define FIC_TX2COUNT(x)		(((x) >>  24) & 0xf)
+#define FIC_TX1COUNT(x)		(((x) >>  16) & 0xf)
+
+#define FIC_TXFLUSH		(1 << 15)
+#define FIC_RXFLUSH		(1 << 7)
+#define FIC_TXCOUNT(x)		(((x) >>  8) & 0xf)
+#define FIC_RXCOUNT(x)		(((x) >>  0) & 0xf)
+#define FICS_TXCOUNT(x)		(((x) >>  8) & 0x7f)
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+struct i2s_dai {
+	/* Platform device for this DAI */
+	struct platform_device *pdev;
+	/* IOREMAP'd SFRs */
+	void __iomem	*addr;
+	/* Physical base address of SFRs */
+	u32	base;
+	/* Rate of RCLK source clock */
+	unsigned long rclk_srcrate;
+	/* Frame Clock */
+	unsigned frmclk;
+	/*
+	 * Specifically requested RCLK,BCLK by MACHINE Driver.
+	 * 0 indicates CPU driver is free to choose any value.
+	 */
+	unsigned rfs, bfs;
+	/* I2S Controller's core clock */
+	struct clk *clk;
+	/* Clock for generating I2S signals */
+	struct clk *op_clk;
+	/* Array of clock names for op_clk */
+	const char **src_clk;
+	/* Pointer to the Primary_Fifo if this is Sec_Fifo, NULL otherwise */
+	struct i2s_dai *pri_dai;
+	/* Pointer to the Secondary_Fifo if it has one, NULL otherwise */
+	struct i2s_dai *sec_dai;
+#define DAI_OPENED	(1 << 0) /* Dai is opened */
+#define DAI_MANAGER	(1 << 1) /* Dai is the manager */
+	unsigned mode;
+	/* Driver for this DAI */
+	struct snd_soc_dai_driver s3c_i2s_drv;
+	/* DMA parameters */
+	struct s3c_dma_params dma_playback;
+	struct s3c_dma_params dma_capture;
+	u32	quirks;
+	u32	suspend_i2smod;
+	u32	suspend_i2scon;
+	u32	suspend_i2spsr;
+};
+
+/* Lock for cross i/f checks */
+static DEFINE_SPINLOCK(lock);
+
+/* If this is the 'overlay' stereo DAI */
+static inline bool is_secondary(struct i2s_dai *i2s)
+{
+	return i2s->pri_dai ? true : false;
+}
+
+/* If operating in SoC-Slave mode */
+static inline bool is_slave(struct i2s_dai *i2s)
+{
+	return (readl(i2s->addr + I2SMOD) & MOD_SLAVE) ? true : false;
+}
+
+/* If this interface of the controller is transmitting data */
+static inline bool tx_active(struct i2s_dai *i2s)
+{
+	u32 active;
+
+	if (!i2s)
+		return false;
+
+	active = readl(i2s->addr + I2SMOD);
+
+	if (is_secondary(i2s))
+		active &= CON_TXSDMA_ACTIVE;
+	else
+		active &= CON_TXDMA_ACTIVE;
+
+	return active ? true : false;
+}
+
+/* If the other interface of the controller is transmitting data */
+static inline bool other_tx_active(struct i2s_dai *i2s)
+{
+	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
+
+	return tx_active(other);
+}
+
+/* If any interface of the controller is transmitting data */
+static inline bool any_tx_active(struct i2s_dai *i2s)
+{
+	return tx_active(i2s) || other_tx_active(i2s);
+}
+
+/* If this interface of the controller is receiving data */
+static inline bool rx_active(struct i2s_dai *i2s)
+{
+	u32 active;
+
+	if (!i2s)
+		return false;
+
+	active = readl(i2s->addr + I2SMOD) & CON_RXDMA_ACTIVE;
+
+	return active ? true : false;
+}
+
+/* If the other interface of the controller is receiving data */
+static inline bool other_rx_active(struct i2s_dai *i2s)
+{
+	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
+
+	return rx_active(other);
+}
+
+/* If any interface of the controller is receiving data */
+static inline bool any_rx_active(struct i2s_dai *i2s)
+{
+	return rx_active(i2s) || other_rx_active(i2s);
+}
+
+/* If the other DAI is transmitting or receiving data */
+static inline bool other_active(struct i2s_dai *i2s)
+{
+	return other_rx_active(i2s) || other_tx_active(i2s);
+}
+
+/* If this DAI is transmitting or receiving data */
+static inline bool this_active(struct i2s_dai *i2s)
+{
+	return tx_active(i2s) || rx_active(i2s);
+}
+
+/* If the controller is active anyway */
+static inline bool any_active(struct i2s_dai *i2s)
+{
+	return this_active(i2s) || other_active(i2s);
+}
+
+static inline struct i2s_dai *to_info(struct snd_soc_dai *dai)
+{
+	return snd_soc_dai_get_drvdata(dai);
+}
+
+static inline bool is_opened(struct i2s_dai *i2s)
+{
+	if (i2s && (i2s->mode & DAI_OPENED))
+		return true;
+	else
+		return false;
+}
+
+static inline bool is_manager(struct i2s_dai *i2s)
+{
+	if (is_opened(i2s) && (i2s->mode & DAI_MANAGER))
+		return true;
+	else
+		return false;
+}
+
+/* Read RCLK of I2S (in multiples of LRCLK) */
+static inline unsigned get_rfs(struct i2s_dai *i2s)
+{
+	u32 rfs = (readl(i2s->addr + I2SMOD) >> 3) & 0x3;
+
+	switch (rfs) {
+	case 3:	return 768;
+	case 2: return 384;
+	case 1:	return 512;
+	default: return 256;
+	}
+}
+
+/* Write RCLK of I2S (in multiples of LRCLK) */
+static inline void set_rfs(struct i2s_dai *i2s, unsigned rfs)
+{
+	u32 mod = readl(i2s->addr + I2SMOD);
+
+	mod &= ~MOD_RCLK_MASK;
+
+	switch (rfs) {
+	case 768:
+		mod |= MOD_RCLK_768FS;
+		break;
+	case 512:
+		mod |= MOD_RCLK_512FS;
+		break;
+	case 384:
+		mod |= MOD_RCLK_384FS;
+		break;
+	default:
+		mod |= MOD_RCLK_256FS;
+		break;
+	}
+
+	writel(mod, i2s->addr + I2SMOD);
+}
+
+/* Read Bit-Clock of I2S (in multiples of LRCLK) */
+static inline unsigned get_bfs(struct i2s_dai *i2s)
+{
+	u32 bfs = (readl(i2s->addr + I2SMOD) >> 1) & 0x3;
+
+	switch (bfs) {
+	case 3: return 24;
+	case 2: return 16;
+	case 1:	return 48;
+	default: return 32;
+	}
+}
+
+/* Write Bit-Clock of I2S (in multiples of LRCLK) */
+static inline void set_bfs(struct i2s_dai *i2s, unsigned bfs)
+{
+	u32 mod = readl(i2s->addr + I2SMOD);
+
+	mod &= ~MOD_BCLK_MASK;
+
+	switch (bfs) {
+	case 48:
+		mod |= MOD_BCLK_48FS;
+		break;
+	case 32:
+		mod |= MOD_BCLK_32FS;
+		break;
+	case 24:
+		mod |= MOD_BCLK_24FS;
+		break;
+	default:
+		mod |= MOD_BCLK_16FS;
+		break;
+	}
+
+	writel(mod, i2s->addr + I2SMOD);
+}
+
+/* Sample-Size */
+static inline int get_blc(struct i2s_dai *i2s)
+{
+	int blc = readl(i2s->addr + I2SMOD);
+
+	blc = (blc >> 13) & 0x3;
+
+	switch (blc) {
+	case 2: return 24;
+	case 1:	return 8;
+	default: return 16;
+	}
+}
+
+/* TX Channel Control */
+static void s3c_i2sv2_txctrl(struct i2s_dai *i2s, int on)
+{
+	void __iomem *addr = i2s->addr;
+	u32 con = readl(addr + I2SCON);
+	u32 mod = readl(addr + I2SMOD) & ~MOD_MASK;
+
+	if (on) {
+		con |= CON_ACTIVE;
+		con &= ~CON_TXCH_PAUSE;
+
+		if (is_secondary(i2s)) {
+			con |= CON_TXSDMA_ACTIVE;
+			con &= ~CON_TXSDMA_PAUSE;
+		} else {
+			con |= CON_TXDMA_ACTIVE;
+			con &= ~CON_TXDMA_PAUSE;
+		}
+
+		if (any_rx_active(i2s))
+			mod |= MOD_TXRX;
+		else
+			mod |= MOD_TXONLY;
+	} else {
+		if (is_secondary(i2s)) {
+			con |=  CON_TXSDMA_PAUSE;
+			con &= ~CON_TXSDMA_ACTIVE;
+		} else {
+			con |=  CON_TXDMA_PAUSE;
+			con &= ~CON_TXDMA_ACTIVE;
+		}
+
+		if (other_tx_active(i2s)) {
+			writel(con, addr + I2SCON);
+			return;
+		}
+
+		con |=  CON_TXCH_PAUSE;
+
+		if (any_rx_active(i2s))
+			mod |= MOD_RXONLY;
+		else
+			con &= ~CON_ACTIVE;
+	}
+
+	writel(mod, addr + I2SMOD);
+	writel(con, addr + I2SCON);
+}
+
+/* RX Channel Control */
+static void s3c_i2sv2_rxctrl(struct i2s_dai *i2s, int on)
+{
+	void __iomem *addr = i2s->addr;
+	u32 con = readl(addr + I2SCON);
+	u32 mod = readl(addr + I2SMOD) & ~MOD_MASK;
+
+	if (on) {
+		con |= CON_RXDMA_ACTIVE | CON_ACTIVE;
+		con &= ~(CON_RXDMA_PAUSE | CON_RXCH_PAUSE);
+
+		if (any_tx_active(i2s))
+			mod |= MOD_TXRX;
+		else
+			mod |= MOD_RXONLY;
+	} else {
+		con |=  CON_RXDMA_PAUSE | CON_RXCH_PAUSE;
+		con &= ~CON_RXDMA_ACTIVE;
+
+		if (any_tx_active(i2s))
+			mod |= MOD_TXONLY;
+		else
+			con &= ~CON_ACTIVE;
+	}
+
+	writel(mod, addr + I2SMOD);
+	writel(con, addr + I2SCON);
+}
+
+/* Flush FIFO of an interface */
+static inline void s3c_i2sv2_fifo(struct i2s_dai *i2s, u32 flush)
+{
+	void __iomem *fic;
+	u32 val;
+
+	if (!i2s)
+		return;
+
+	if (is_secondary(i2s))
+		fic = i2s->addr + I2SFICS;
+	else
+		fic = i2s->addr + I2SFIC;
+
+	/* Flush the FIFO */
+	writel(readl(fic) | flush, fic);
+
+	/* Be patient */
+	val = msecs_to_loops(1) / 1000; /* 1 usec */
+	while (--val)
+		cpu_relax();
+
+	writel(readl(fic) & ~flush, fic);
+}
+
+static int s3c_i2sv2_set_sysclk(struct snd_soc_dai *dai,
+	  int clk_id, unsigned int rfs, int dir)
+{
+	struct i2s_dai *i2s = to_info(dai);
+	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
+	u32 mod = readl(i2s->addr + I2SMOD);
+
+	switch (clk_id) {
+	case SAMSUNG_I2S_CDCLK:
+		/* Shouldn't matter in GATING(CLOCK_IN) mode */
+		if (dir == SND_SOC_CLOCK_IN)
+			rfs = 0;
+
+		if ((rfs && other->rfs && (other->rfs != rfs)) ||
+				(any_active(i2s) &&
+				(((dir == SND_SOC_CLOCK_IN)
+					&& !(mod & MOD_CDCLKCON)) ||
+				((dir == SND_SOC_CLOCK_OUT)
+					&& (mod & MOD_CDCLKCON))))) {
+			dev_err(&i2s->pdev->dev,
+				"%s:%d Other DAI busy\n", __func__, __LINE__);
+			return -EAGAIN;
+		}
+
+		if (dir == SND_SOC_CLOCK_IN)
+			mod |= MOD_CDCLKCON;
+		else
+			mod &= ~MOD_CDCLKCON;
+
+		i2s->rfs = rfs;
+		break;
+
+	case SAMSUNG_I2S_RCLKSRC_0: /* clock corrsponding to IISMOD[10] := 0 */
+	case SAMSUNG_I2S_RCLKSRC_1: /* clock corrsponding to IISMOD[10] := 1 */
+		if ((i2s->quirks & QUIRK_NO_MUXPSR)
+				|| (clk_id == SAMSUNG_I2S_RCLKSRC_0))
+			clk_id = 0;
+		else
+			clk_id = 1;
+
+		if (!any_active(i2s)) {
+			if (i2s->op_clk) {
+				if ((clk_id && !(mod & MOD_IMS_SYSMUX)) ||
+					(!clk_id && (mod & MOD_IMS_SYSMUX))) {
+					clk_disable(i2s->op_clk);
+					clk_put(i2s->op_clk);
+				} else {
+					return 0;
+				}
+			}
+
+			i2s->op_clk = clk_get(&i2s->pdev->dev,
+						i2s->src_clk[clk_id]);
+			clk_enable(i2s->op_clk);
+			i2s->rclk_srcrate = clk_get_rate(i2s->op_clk);
+
+			/* Over-ride the other's */
+			if (other) {
+				other->op_clk = i2s->op_clk;
+				other->rclk_srcrate = i2s->rclk_srcrate;
+			}
+		} else if ((!clk_id && (mod & MOD_IMS_SYSMUX))
+				|| (clk_id && !(mod & MOD_IMS_SYSMUX))) {
+			dev_err(&i2s->pdev->dev,
+				"%s:%d Other DAI busy\n", __func__, __LINE__);
+			return -EAGAIN;
+		} else {
+			/* Call can't be on the active DAI */
+			i2s->op_clk = other->op_clk;
+			i2s->rclk_srcrate = other->rclk_srcrate;
+			return 0;
+		}
+
+		if (clk_id == 0)
+			mod &= ~MOD_IMS_SYSMUX;
+		else
+			mod |= MOD_IMS_SYSMUX;
+		break;
+
+	default:
+		dev_err(&i2s->pdev->dev, "We don't serve that!\n");
+		return -EINVAL;
+	}
+
+	writel(mod, i2s->addr + I2SMOD);
+
+	return 0;
+}
+
+static int i2sv2_i2s_set_fmt(struct snd_soc_dai *dai,
+	unsigned int fmt)
+{
+	struct i2s_dai *i2s = to_info(dai);
+	u32 mod = readl(i2s->addr + I2SMOD);
+	u32 tmp = 0;
+
+	/* Format is priority */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_RIGHT_J:
+		tmp |= MOD_LR_RLOW;
+		tmp |= MOD_SDF_MSB;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		tmp |= MOD_LR_RLOW;
+		tmp |= MOD_SDF_LSB;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		tmp |= MOD_SDF_IIS;
+		break;
+	default:
+		dev_err(&i2s->pdev->dev, "Format not supported\n");
+		return -EINVAL;
+	}
+
+	/* Allow LRCLK-inverted version of the supported formats */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		if (tmp & MOD_LR_RLOW)
+			tmp &= ~MOD_LR_RLOW;
+		else
+			tmp |= MOD_LR_RLOW;
+		break;
+	default:
+		dev_err(&i2s->pdev->dev, "Polarity not supported\n");
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		tmp |= MOD_SLAVE;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		/* Set default source clock in Master mode */
+		if (i2s->rclk_srcrate == 0)
+			s3c_i2sv2_set_sysclk(dai, SAMSUNG_I2S_RCLKSRC_0,
+							0, SND_SOC_CLOCK_IN);
+		break;
+	default:
+		dev_err(&i2s->pdev->dev, "master/slave format not supported\n");
+		return -EINVAL;
+	}
+
+	if (any_active(i2s) &&
+			((mod & (MOD_SDF_MASK | MOD_LR_RLOW
+				| MOD_SLAVE)) != tmp)) {
+		dev_err(&i2s->pdev->dev,
+				"%s:%d Other DAI busy\n", __func__, __LINE__);
+		return -EAGAIN;
+	}
+
+	mod &= ~(MOD_SDF_MASK | MOD_LR_RLOW | MOD_SLAVE);
+	mod |= tmp;
+	writel(mod, i2s->addr + I2SMOD);
+
+	return 0;
+}
+
+static int s3c_i2sv2_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+	struct i2s_dai *i2s = to_info(dai);
+	u32 mod = readl(i2s->addr + I2SMOD);
+
+	if (!is_secondary(i2s))
+		mod &= ~(MOD_DC2_EN | MOD_DC1_EN);
+
+	switch (params_channels(params)) {
+	case 6:
+		mod |= MOD_DC2_EN;
+	case 4:
+		mod |= MOD_DC1_EN;
+		break;
+	case 2:
+		break;
+	default:
+		dev_err(&i2s->pdev->dev, "%d channels not supported\n",
+				params_channels(params));
+		return -EINVAL;
+	}
+
+	if (is_secondary(i2s))
+		mod &= ~MOD_BLCS_MASK;
+	else
+		mod &= ~MOD_BLCP_MASK;
+
+	if (is_manager(i2s))
+		mod &= ~MOD_BLC_MASK;
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S8:
+		if (is_secondary(i2s))
+			mod |= MOD_BLCS_8BIT;
+		else
+			mod |= MOD_BLCP_8BIT;
+		if (is_manager(i2s))
+			mod |= MOD_BLC_8BIT;
+		break;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		if (is_secondary(i2s))
+			mod |= MOD_BLCS_16BIT;
+		else
+			mod |= MOD_BLCP_16BIT;
+		if (is_manager(i2s))
+			mod |= MOD_BLC_16BIT;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		if (is_secondary(i2s))
+			mod |= MOD_BLCS_24BIT;
+		else
+			mod |= MOD_BLCP_24BIT;
+		if (is_manager(i2s))
+			mod |= MOD_BLC_24BIT;
+		break;
+	default:
+		dev_err(&i2s->pdev->dev, "Format(%d) not supported\n",
+				params_format(params));
+		return -EINVAL;
+	}
+	writel(mod, i2s->addr + I2SMOD);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		snd_soc_dai_set_dma_data(dai, substream,
+			(void *)&i2s->dma_playback);
+	else
+		snd_soc_dai_set_dma_data(dai, substream,
+			(void *)&i2s->dma_capture);
+
+	i2s->frmclk = params_rate(params);
+
+	return 0;
+}
+
+/* We set constraints on the substream acc to the version of I2S */
+static int s3c_i2sv2_startup(struct snd_pcm_substream *substream,
+	  struct snd_soc_dai *dai)
+{
+	struct i2s_dai *i2s = to_info(dai);
+	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
+	unsigned long flags;
+
+	spin_lock_irqsave(&lock, flags);
+
+	i2s->mode |= DAI_OPENED;
+
+	if (is_manager(other))
+		i2s->mode &= ~DAI_MANAGER;
+	else
+		i2s->mode |= DAI_MANAGER;
+
+	/* Enforce set_sysclk in Master mode */
+	i2s->rclk_srcrate = 0;
+
+	spin_unlock_irqrestore(&lock, flags);
+
+	return 0;
+}
+
+static void s3c_i2sv2_shutdown(struct snd_pcm_substream *substream,
+	struct snd_soc_dai *dai)
+{
+	struct i2s_dai *i2s = to_info(dai);
+	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
+	unsigned long flags;
+
+	spin_lock_irqsave(&lock, flags);
+
+	i2s->mode &= ~DAI_OPENED;
+	i2s->mode &= ~DAI_MANAGER;
+
+	if (is_opened(other))
+		other->mode |= DAI_MANAGER;
+
+	/* Reset any constraint on RFS and BFS */
+	i2s->rfs = 0;
+	i2s->bfs = 0;
+
+	spin_unlock_irqrestore(&lock, flags);
+
+	/* Gate CDCLK by default */
+	if (!is_opened(other))
+		s3c_i2sv2_set_sysclk(dai, SAMSUNG_I2S_CDCLK,
+				0, SND_SOC_CLOCK_IN);
+}
+
+static int config_setup(struct i2s_dai *i2s)
+{
+	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
+	unsigned rfs, bfs, blc;
+	u32 psr;
+
+	blc = get_blc(i2s);
+
+	bfs = i2s->bfs;
+
+	if (!bfs && other)
+		bfs = other->bfs;
+
+	/* Select least possible multiple(2) if no constraint set */
+	if (!bfs)
+		bfs = blc * 2;
+
+	rfs = i2s->rfs;
+
+	if (!rfs && other)
+		rfs = other->rfs;
+
+	if ((rfs == 256 || rfs == 512) && (blc == 24)) {
+		dev_err(&i2s->pdev->dev,
+			"%d-RFS not supported for 24-blc\n", rfs);
+		return -EINVAL;
+	}
+
+	if (!rfs) {
+		if (bfs == 16 || bfs == 32)
+			rfs = 256;
+		else
+			rfs = 384;
+	}
+
+	/* If already setup and running */
+	if (any_active(i2s) && (get_rfs(i2s) != rfs || get_bfs(i2s) != bfs)) {
+		dev_err(&i2s->pdev->dev,
+				"%s:%d Other DAI busy\n", __func__, __LINE__);
+		return -EAGAIN;
+	}
+
+	/* We don't care about BFS in Slave mode */
+	if (is_slave(i2s))
+		return 0;
+
+	set_bfs(i2s, bfs);
+	set_rfs(i2s, rfs);
+
+	if (!(i2s->quirks & QUIRK_NO_MUXPSR)) {
+		psr = i2s->rclk_srcrate / i2s->frmclk / rfs;
+		writel(((psr - 1) << 8) | PSR_PSREN, i2s->addr + I2SPSR);
+		dev_dbg(&i2s->pdev->dev,
+			"RCLK_SRC=%luHz PSR=%u, RCLK=%dfs, BCLK=%dfs\n",
+				i2s->rclk_srcrate, psr, rfs, bfs);
+	}
+
+	return 0;
+}
+
+static int i2sv2_i2s_trigger(struct snd_pcm_substream *substream,
+	int cmd, struct snd_soc_dai *dai)
+{
+	int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct i2s_dai *i2s = to_info(rtd->cpu_dai);
+	unsigned long flags;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		local_irq_save(flags);
+
+		if (capture)
+			s3c_i2sv2_fifo(i2s, FIC_RXFLUSH);
+		else
+			s3c_i2sv2_fifo(i2s, FIC_TXFLUSH);
+
+		if (config_setup(i2s)) {
+			local_irq_restore(flags);
+			return -EINVAL;
+		}
+
+		if (capture)
+			s3c_i2sv2_rxctrl(i2s, 1);
+		else
+			s3c_i2sv2_txctrl(i2s, 1);
+
+		local_irq_restore(flags);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		local_irq_save(flags);
+
+		if (capture)
+			s3c_i2sv2_rxctrl(i2s, 0);
+		else
+			s3c_i2sv2_txctrl(i2s, 0);
+
+		local_irq_restore(flags);
+		break;
+	}
+
+	return 0;
+}
+
+static int i2sv2_i2s_set_clkdiv(struct snd_soc_dai *dai,
+	int div_id, int div)
+{
+	struct i2s_dai *i2s = to_info(dai);
+	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
+
+	if (div_id == SAMSUNG_I2S_DIV_BCLK) {
+		if ((any_active(i2s) && div && (get_bfs(i2s) != div))
+			|| (other && other->bfs && (other->bfs != div))) {
+			dev_err(&i2s->pdev->dev,
+				"%s:%d Other DAI busy\n", __func__, __LINE__);
+			return -EAGAIN;
+		}
+		i2s->bfs = div;
+	} else {
+		dev_err(&i2s->pdev->dev,
+			"Invalid clock divider(%d)\n", div_id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static snd_pcm_sframes_t
+i2sv2_i2s_delay(struct snd_pcm_substream *substream, struct snd_soc_dai *dai)
+{
+	struct i2s_dai *i2s = to_info(dai);
+	u32 reg = readl(i2s->addr + I2SFIC);
+	snd_pcm_sframes_t delay;
+
+	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+		delay = FIC_RXCOUNT(reg);
+	else if (is_secondary(i2s))
+		delay = FICS_TXCOUNT(readl(i2s->addr + I2SFICS));
+	else
+		delay = FIC_TXCOUNT(reg);
+
+	return delay;
+}
+
+#ifdef CONFIG_PM
+static int i2sv2_i2s_suspend(struct snd_soc_dai *dai)
+{
+	struct i2s_dai *i2s = to_info(dai);
+
+	if (dai->active) {
+		i2s->suspend_i2smod = readl(i2s->addr + I2SMOD);
+		i2s->suspend_i2scon = readl(i2s->addr + I2SCON);
+		i2s->suspend_i2spsr = readl(i2s->addr + I2SPSR);
+	}
+
+	return 0;
+}
+
+static int i2sv2_i2s_resume(struct snd_soc_dai *dai)
+{
+	struct i2s_dai *i2s = to_info(dai);
+
+	if (dai->active) {
+		writel(i2s->suspend_i2scon, i2s->addr + I2SCON);
+		writel(i2s->suspend_i2smod, i2s->addr + I2SMOD);
+		writel(i2s->suspend_i2spsr, i2s->addr + I2SPSR);
+	}
+
+	return 0;
+}
+#else
+#define i2sv2_i2s_suspend NULL
+#define i2sv2_i2s_resume  NULL
+#endif
+
+static int samsung_i2s_dai_probe(struct snd_soc_dai *dai)
+{
+	struct i2s_dai *i2s = to_info(dai);
+	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
+
+	if (other && other->clk) /* If this is probe on secondary */
+		goto probe_exit;
+
+	i2s->addr = ioremap(i2s->base, 0x100);
+	if (i2s->addr == NULL) {
+		dev_err(&i2s->pdev->dev, "cannot ioremap registers\n");
+		return -ENXIO;
+	}
+
+	i2s->clk = clk_get(&i2s->pdev->dev, "iis");
+	if (IS_ERR(i2s->clk)) {
+		dev_err(&i2s->pdev->dev, "failed to get i2s_clock\n");
+		iounmap(i2s->addr);
+		return -ENOENT;
+	}
+	clk_enable(i2s->clk);
+
+	if (other) {
+		other->addr = i2s->addr;
+		other->clk = i2s->clk;
+	}
+
+	if (i2s->quirks & QUIRK_NEED_RSTCLR)
+		writel(CON_RSTCLR, i2s->addr + I2SCON);
+
+probe_exit:
+	/* Reset any constraint on RFS and BFS */
+	i2s->rfs = 0;
+	i2s->bfs = 0;
+	s3c_i2sv2_txctrl(i2s, 0);
+	s3c_i2sv2_rxctrl(i2s, 0);
+	s3c_i2sv2_fifo(i2s, FIC_TXFLUSH);
+	s3c_i2sv2_fifo(other, FIC_TXFLUSH);
+	s3c_i2sv2_fifo(i2s, FIC_RXFLUSH);
+
+	/* Gate CDCLK by default */
+	if (!is_opened(other))
+		s3c_i2sv2_set_sysclk(dai, SAMSUNG_I2S_CDCLK,
+				0, SND_SOC_CLOCK_IN);
+
+	return 0;
+}
+
+static int samsung_i2s_dai_remove(struct snd_soc_dai *dai)
+{
+	struct i2s_dai *i2s = snd_soc_dai_get_drvdata(dai);
+	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
+
+	if (!other || !other->clk) {
+
+		if (i2s->quirks & QUIRK_NEED_RSTCLR)
+			writel(0, i2s->addr + I2SCON);
+
+		clk_disable(i2s->clk);
+		clk_put(i2s->clk);
+
+		iounmap(i2s->addr);
+	}
+
+	i2s->clk = NULL;
+
+	return 0;
+}
+
+static struct snd_soc_dai_ops samsung_i2s_dai_ops = {
+	.trigger = i2sv2_i2s_trigger,
+	.hw_params = s3c_i2sv2_hw_params,
+	.set_fmt = i2sv2_i2s_set_fmt,
+	.set_clkdiv = i2sv2_i2s_set_clkdiv,
+	.set_sysclk = s3c_i2sv2_set_sysclk,
+	.startup = s3c_i2sv2_startup,
+	.shutdown = s3c_i2sv2_shutdown,
+	.delay = i2sv2_i2s_delay,
+};
+
+#define SAMSUNG_I2S_RATES \
+	(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
+	SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+	SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
+
+#define SAMSUNG_I2S_FMTS \
+	(SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\
+	 SNDRV_PCM_FMTBIT_S24_LE)
+
+static __devinit
+struct i2s_dai *s3c_alloc_dai(struct platform_device *pdev, bool sec)
+{
+	struct i2s_dai *i2s;
+
+	i2s = kzalloc(sizeof(struct i2s_dai), GFP_KERNEL);
+	if (i2s == NULL)
+		return NULL;
+
+	i2s->pdev = pdev;
+	i2s->pri_dai = NULL;
+	i2s->sec_dai = NULL;
+	i2s->s3c_i2s_drv.symmetric_rates = 1;
+	i2s->s3c_i2s_drv.probe = samsung_i2s_dai_probe;
+	i2s->s3c_i2s_drv.remove = samsung_i2s_dai_remove;
+	i2s->s3c_i2s_drv.ops = &samsung_i2s_dai_ops;
+	i2s->s3c_i2s_drv.suspend = i2sv2_i2s_suspend;
+	i2s->s3c_i2s_drv.resume = i2sv2_i2s_resume;
+	i2s->s3c_i2s_drv.playback.channels_min = 2;
+	i2s->s3c_i2s_drv.playback.channels_max = 2;
+	i2s->s3c_i2s_drv.playback.rates = SAMSUNG_I2S_RATES;
+	i2s->s3c_i2s_drv.playback.formats = SAMSUNG_I2S_FMTS;
+
+	if (!sec) {
+		i2s->s3c_i2s_drv.capture.channels_min = 2;
+		i2s->s3c_i2s_drv.capture.channels_max = 2;
+		i2s->s3c_i2s_drv.capture.rates = SAMSUNG_I2S_RATES;
+		i2s->s3c_i2s_drv.capture.formats = SAMSUNG_I2S_FMTS;
+	} else {	/* Create a new platform_device for Secondary */
+		i2s->pdev = platform_device_register_resndata(NULL,
+				pdev->name, pdev->id + MAX_I2S,
+				NULL, 0, NULL, 0);
+		if (IS_ERR(i2s->pdev)) {
+			kfree(i2s);
+			return NULL;
+		}
+	}
+
+	/* Pre-assign snd_soc_dai_set_drvdata */
+	dev_set_drvdata(&i2s->pdev->dev, i2s);
+
+	return i2s;
+}
+
+static __devinit int samsung_i2s_probe(struct platform_device *pdev)
+{
+	u32 dma_pl_chan, dma_cp_chan, dma_pl_sec_chan;
+	struct i2s_dai *pri_dai, *sec_dai = NULL;
+	struct s3c_audio_pdata *i2s_pdata;
+	struct samsung_i2s *i2s_cfg;
+	struct resource *res;
+	u32 regs_base, quirks;
+	int ret = 0;
+
+	/* Call during Seconday interface registration */
+	if (pdev->id >= MAX_I2S) {
+		sec_dai = dev_get_drvdata(&pdev->dev);
+		snd_soc_register_dai(&sec_dai->pdev->dev,
+			&sec_dai->s3c_i2s_drv);
+		return 0;
+	}
+
+	i2s_pdata = pdev->dev.platform_data;
+	if (i2s_pdata == NULL) {
+		dev_err(&pdev->dev, "Can't work without s3c_audio_pdata\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Unable to get I2S-TX dma resource\n");
+		return -ENXIO;
+	}
+	dma_pl_chan = res->start;
+
+	res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (!res) {
+		dev_err(&pdev->dev, "Unable to get I2S-RX dma resource\n");
+		return -ENXIO;
+	}
+	dma_cp_chan = res->start;
+
+	res = platform_get_resource(pdev, IORESOURCE_DMA, 2);
+	if (res)
+		dma_pl_sec_chan = res->start;
+	else
+		dma_pl_sec_chan = 0;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Unable to get I2S SFR address\n");
+		return -ENXIO;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res),
+							"samsung-i2s")) {
+		dev_err(&pdev->dev, "Unable to request SFR region\n");
+		return -EBUSY;
+	}
+	regs_base = res->start;
+
+	i2s_cfg = &i2s_pdata->type.i2s;
+	quirks = i2s_cfg->quirks;
+
+	pri_dai = s3c_alloc_dai(pdev, false);
+	if (!pri_dai) {
+		dev_err(&pdev->dev, "Unable to alloc I2S_pri\n");
+		ret = -ENOMEM;
+		goto err1;
+	}
+
+	pri_dai->dma_playback.dma_addr = regs_base + I2STXD;
+	pri_dai->dma_capture.dma_addr = regs_base + I2SRXD;
+	pri_dai->dma_playback.client =
+		(struct s3c2410_dma_client *)&pri_dai->dma_playback;
+	pri_dai->dma_capture.client =
+		(struct s3c2410_dma_client *)&pri_dai->dma_capture;
+	pri_dai->dma_playback.channel = dma_pl_chan;
+	pri_dai->dma_capture.channel = dma_cp_chan;
+	pri_dai->src_clk = i2s_cfg->src_clk;
+	pri_dai->dma_playback.dma_size = 4;
+	pri_dai->dma_capture.dma_size = 4;
+	pri_dai->base = regs_base;
+	pri_dai->quirks = quirks;
+
+	if (quirks & QUIRK_PRI_6CHAN)
+		pri_dai->s3c_i2s_drv.playback.channels_max = 6;
+
+	if (quirks & QUIRK_SEC_DAI) {
+		sec_dai = s3c_alloc_dai(pdev, true);
+		if (!sec_dai) {
+			dev_err(&pdev->dev, "Unable to alloc I2S_sec\n");
+			ret = -ENOMEM;
+			goto err2;
+		}
+		sec_dai->dma_playback.dma_addr = regs_base + I2STXDS;
+		sec_dai->dma_playback.client =
+			(struct s3c2410_dma_client *)&sec_dai->dma_playback;
+		/* Use iDMA always if SysDMA not provided */
+		sec_dai->dma_playback.channel = dma_pl_sec_chan ? : -1;
+		sec_dai->src_clk = i2s_cfg->src_clk;
+		sec_dai->dma_playback.dma_size = 4;
+		sec_dai->base = regs_base;
+		sec_dai->quirks = quirks;
+		sec_dai->pri_dai = pri_dai;
+		pri_dai->sec_dai = sec_dai;
+	}
+
+	if (i2s_pdata->cfg_gpio && i2s_pdata->cfg_gpio(pdev)) {
+		dev_err(&pdev->dev, "Unable to configure gpio\n");
+		ret = -EINVAL;
+		goto err3;
+	}
+
+	snd_soc_register_dai(&pri_dai->pdev->dev, &pri_dai->s3c_i2s_drv);
+
+	return 0;
+err3:
+	kfree(sec_dai);
+err2:
+	kfree(pri_dai);
+err1:
+	release_mem_region(regs_base, resource_size(res));
+
+	return ret;
+}
+
+static __devexit int samsung_i2s_remove(struct platform_device *pdev)
+{
+	struct i2s_dai *i2s, *other;
+
+	i2s = dev_get_drvdata(&pdev->dev);
+	other = i2s->pri_dai ? : i2s->sec_dai;
+
+	if (other) {
+		other->pri_dai = NULL;
+		other->sec_dai = NULL;
+	} else {
+		struct resource *res;
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (res)
+			release_mem_region(res->start, resource_size(res));
+	}
+
+	i2s->pri_dai = NULL;
+	i2s->sec_dai = NULL;
+
+	kfree(i2s);
+
+	snd_soc_unregister_dai(&pdev->dev);
+
+	return 0;
+}
+
+static struct platform_driver samsung_i2s_driver = {
+	.probe  = samsung_i2s_probe,
+	.remove = samsung_i2s_remove,
+	.driver = {
+		.name = "samsung-i2s",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init samsung_i2s_init(void)
+{
+	return platform_driver_register(&samsung_i2s_driver);
+}
+module_init(samsung_i2s_init);
+
+static void __exit samsung_i2s_exit(void)
+{
+	platform_driver_unregister(&samsung_i2s_driver);
+}
+module_exit(samsung_i2s_exit);
+
+/* Module information */
+MODULE_AUTHOR("Jaswinder Singh, <jassi.brar@samsung.com>");
+MODULE_DESCRIPTION("Samsung I2S Interface");
+MODULE_ALIAS("platform:samsung-i2s");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/i2s.h b/sound/soc/s3c24xx/i2s.h
new file mode 100644
index 0000000..77b7965
--- /dev/null
+++ b/sound/soc/s3c24xx/i2s.h
@@ -0,0 +1,29 @@
+/* sound/soc/s3c24xx/i2s.h
+ *
+ * ALSA SoC Audio Layer - Samsung I2S Controller driver
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SND_SOC_SAMSUNG_I2S_H
+#define __SND_SOC_SAMSUNG_I2S_H
+
+/*
+ * Maximum number of I2S blocks that any SoC can have.
+ * The secondary interface of a CPU dai(if there exists any),
+ * is indexed at [cpu-dai's ID + MAX_I2S]
+ */
+#define MAX_I2S	4
+
+#define SAMSUNG_I2S_DIV_BCLK	1
+
+#define SAMSUNG_I2S_RCLKSRC_0	0
+#define SAMSUNG_I2S_RCLKSRC_1	1
+#define SAMSUNG_I2S_CDCLK		2
+
+#endif /* __SND_SOC_SAMSUNG_I2S_H */
-- 
1.6.2.5

Re: [PATCH 11/25] ASoC: Samsung: Add common I2S driver

[Mark Brown]

On Tue, Oct 19, 2010 at 04:07:05PM +0900, Jassi Brar wrote:

This looks good - there's a few comments below but they're pretty small
things.

>  /**
>   * struct s3c_audio_pdata - common platform data for audio device drivers
>   * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
>   */
>  struct s3c_audio_pdata {
>  	int (*cfg_gpio)(struct platform_device *);
> +	union {
> +		struct samsung_i2s i2s;
> +	} type;

Might be as easy just to embed a struct s3c_audio_pdata within the
struct samsung_i2s?

> +	switch (bfs) {
> +	case 48:
> +		mod |= MOD_BCLK_48FS;
> +		break;
> +	case 32:
> +		mod |= MOD_BCLK_32FS;
> +		break;
> +	case 24:
> +		mod |= MOD_BCLK_24FS;
> +		break;
> +	default:
> +		mod |= MOD_BCLK_16FS;
> +		break;

Especially on the write side I'd be a bit more comfortable if these
functions didn't silently convert an unspecified setting into a default
so that we know that users are getting the setting they asked for.

> +		if (is_secondary(i2s)) {
> +			con |= CON_TXSDMA_ACTIVE;
> +			con &= ~CON_TXSDMA_PAUSE;
> +		} else {
> +			con |= CON_TXDMA_ACTIVE;
> +			con &= ~CON_TXDMA_PAUSE;

Can we do this stuff with a variable storing the mask to use?  It might
compress the code a lot but I've not looked at what the bits actually
are.

> +	/* Allow LRCLK-inverted version of the supported formats */
> +	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
> +	case SND_SOC_DAIFMT_NB_NF:
> +		break;
> +	case SND_SOC_DAIFMT_NB_IF:
> +		if (tmp & MOD_LR_RLOW)
> +			tmp &= ~MOD_LR_RLOW;
> +		else
> +			tmp |= MOD_LR_RLOW;
> +		break;

This looks a bit odd - it'll flip MOD_LR_FLOW if the frame is inverted,
I'd expect it to want to set a specific value?

> +	/* We don't care about BFS in Slave mode */
> +	if (is_slave(i2s))
> +		return 0;

You're skipping more than just rfs setting here.  Probably just a case
of updating the comment.

> +static int i2sv2_i2s_set_clkdiv(struct snd_soc_dai *dai,
> +	int div_id, int div)
> +{
> +	struct i2s_dai *i2s = to_info(dai);
> +	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
> +
> +	if (div_id == SAMSUNG_I2S_DIV_BCLK) {

switch statement please.

> +#define SAMSUNG_I2S_RATES \
> +	(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
> +	SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
> +	SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)

SNDRV_PCM_RATE_8000_96000.

> +/*
> + * Maximum number of I2S blocks that any SoC can have.
> + * The secondary interface of a CPU dai(if there exists any),
> + * is indexed at [cpu-dai's ID + MAX_I2S]
> + */
> +#define MAX_I2S	4

Can this be kept internal to the driver?  If not it should be
namespaced.

Re: [PATCH 11/25] ASoC: Samsung: Add common I2S driver

[Jassi Brar]

On Tue, Oct 19, 2010 at 6:35 PM, Mark Brown
<broonie@opensource.wolfsonmicro.com> wrote:
> On Tue, Oct 19, 2010 at 04:07:05PM +0900, Jassi Brar wrote:
>
> This looks good - there's a few comments below but they're pretty small
> things.
>
>>  /**
>>   * struct s3c_audio_pdata - common platform data for audio device drivers
>>   * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
>>   */
>>  struct s3c_audio_pdata {
>>       int (*cfg_gpio)(struct platform_device *);
>> +     union {
>> +             struct samsung_i2s i2s;
>> +     } type;
>
> Might be as easy just to embed a struct s3c_audio_pdata within the
> struct samsung_i2s?

struct s3c_audio_pdata is shared among I2S, AC97, SPDIF and PCM.
Here the idea is that controller drivers add specific structures to the union
as and when they need it.


>> +     switch (bfs) {
>> +     case 48:
>> +             mod |= MOD_BCLK_48FS;
>> +             break;
>> +     case 32:
>> +             mod |= MOD_BCLK_32FS;
>> +             break;
>> +     case 24:
>> +             mod |= MOD_BCLK_24FS;
>> +             break;
>> +     default:
>> +             mod |= MOD_BCLK_16FS;
>> +             break;
>
> Especially on the write side I'd be a bit more comfortable if these
> functions didn't silently convert an unspecified setting into a default
> so that we know that users are getting the setting they asked for.

Ok. I'll add a case for 16 and print error in default.



>> +             if (is_secondary(i2s)) {
>> +                     con |= CON_TXSDMA_ACTIVE;
>> +                     con &= ~CON_TXSDMA_PAUSE;
>> +             } else {
>> +                     con |= CON_TXDMA_ACTIVE;
>> +                     con &= ~CON_TXDMA_PAUSE;
>
> Can we do this stuff with a variable storing the mask to use?  It might
> compress the code a lot but I've not looked at what the bits actually
> are.

sorry, I am unable to understand what you suggest

>
>> +     /* Allow LRCLK-inverted version of the supported formats */
>> +     switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
>> +     case SND_SOC_DAIFMT_NB_NF:
>> +             break;
>> +     case SND_SOC_DAIFMT_NB_IF:
>> +             if (tmp & MOD_LR_RLOW)
>> +                     tmp &= ~MOD_LR_RLOW;
>> +             else
>> +                     tmp |= MOD_LR_RLOW;
>> +             break;
>
> This looks a bit odd - it'll flip MOD_LR_FLOW if the frame is inverted,
> I'd expect it to want to set a specific value?

The frame polarity is specified by the Format(I2S, LSB, MSB), so we
set/clear MOD_LR_RLOW acc to the Format requested.
The Inversion request works relative to the Format -- if Frame inversion
is requested, we simply flip it from the value set during Format setting.


>> +     /* We don't care about BFS in Slave mode */
>> +     if (is_slave(i2s))
>> +             return 0;
>
> You're skipping more than just rfs setting here.  Probably just a case
> of updating the comment.

Yes, I need to update the comment.


>> +static int i2sv2_i2s_set_clkdiv(struct snd_soc_dai *dai,
>> +     int div_id, int div)
>> +{
>> +     struct i2s_dai *i2s = to_info(dai);
>> +     struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
>> +
>> +     if (div_id == SAMSUNG_I2S_DIV_BCLK) {
>
> switch statement please.

Switch didn't look very pretty with just one case, so I made it if-else
Anyways, I'll change it to switch.


>> +#define SAMSUNG_I2S_RATES \
>> +     (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
>> +     SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
>> +     SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
>
> SNDRV_PCM_RATE_8000_96000.

of course !

>> +/*
>> + * Maximum number of I2S blocks that any SoC can have.
>> + * The secondary interface of a CPU dai(if there exists any),
>> + * is indexed at [cpu-dai's ID + MAX_I2S]
>> + */
>> +#define MAX_I2S      4
>
> Can this be kept internal to the driver?  If not it should be
> namespaced.

ASoC machine drivers need to index the secondary dai that is
automatically created and registered by the cpu driver.
So, it needs to be available outside.
I'll make it SAMSUNG_I2S_SECOFF -- secondary offset of I2S(?)

Thanks.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: [PATCH 11/25] ASoC: Samsung: Add common I2S driver

[Mark Brown]

On Wed, Oct 20, 2010 at 11:22:26AM +0900, Jassi Brar wrote:
> On Tue, Oct 19, 2010 at 6:35 PM, Mark Brown

> > Might be as easy just to embed a struct s3c_audio_pdata within the
> > struct samsung_i2s?

> struct s3c_audio_pdata is shared among I2S, AC97, SPDIF and PCM.
> Here the idea is that controller drivers add specific structures to the union
> as and when they need it.

Right, what I'm saying is that it'd seem more natural to do things the
other way around and embed the common structure within a device specific
pdata structure instead of having the union.

> >> +             if (is_secondary(i2s)) {
> >> +                     con |= CON_TXSDMA_ACTIVE;
> >> +                     con &= ~CON_TXSDMA_PAUSE;
> >> +             } else {
> >> +                     con |= CON_TXDMA_ACTIVE;
> >> +                     con &= ~CON_TXDMA_PAUSE;

> > Can we do this stuff with a variable storing the mask to use?  It might
> > compress the code a lot but I've not looked at what the bits actually
> > are.

> sorry, I am unable to understand what you suggest

If we have something in the driver data struct specifying the masks to
use then set these at probe time rather than having the if statements -
probably the same mask can be used for playback & record if the
bitfields are lined up similarly.  This would then be:

	con |= data->active_mask;
	con &= ~data->pause_mask;

or similar, possibly with some shifts.

> >> +     /* Allow LRCLK-inverted version of the supported formats */
> >> +     switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
> >> +     case SND_SOC_DAIFMT_NB_NF:
> >> +             break;
> >> +     case SND_SOC_DAIFMT_NB_IF:
> >> +             if (tmp & MOD_LR_RLOW)
> >> +                     tmp &= ~MOD_LR_RLOW;
> >> +             else
> >> +                     tmp |= MOD_LR_RLOW;
> >> +             break;

> > This looks a bit odd - it'll flip MOD_LR_FLOW if the frame is inverted,
> > I'd expect it to want to set a specific value?

> The frame polarity is specified by the Format(I2S, LSB, MSB), so we
> set/clear MOD_LR_RLOW acc to the Format requested.
> The Inversion request works relative to the Format -- if Frame inversion
> is requested, we simply flip it from the value set during Format setting.

Please add a comment explaining that you're inverting the orientation
you set previously - it's really surprising when reading the code.

> >> +static int i2sv2_i2s_set_clkdiv(struct snd_soc_dai *dai,
> >> +     int div_id, int div)
> >> +{
> >> +     struct i2s_dai *i2s = to_info(dai);
> >> +     struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
> >> +
> >> +     if (div_id == SAMSUNG_I2S_DIV_BCLK) {

> > switch statement please.

> Switch didn't look very pretty with just one case, so I made it if-else
> Anyways, I'll change it to switch.

It helps make the code correspond to the expected patterns for selecting
one of many clocks which is especially helpful when doing a big picture
scan.

> >> +/*
> >> + * Maximum number of I2S blocks that any SoC can have.
> >> + * The secondary interface of a CPU dai(if there exists any),
> >> + * is indexed at [cpu-dai's ID + MAX_I2S]
> >> + */
> >> +#define MAX_I2S      4

> > Can this be kept internal to the driver?  If not it should be
> > namespaced.

> ASoC machine drivers need to index the secondary dai that is
> automatically created and registered by the cpu driver.
> So, it needs to be available outside.
> I'll make it SAMSUNG_I2S_SECOFF -- secondary offset of I2S(?)

How would the index be used with multi-component?

Re: [PATCH 11/25] ASoC: Samsung: Add common I2S driver

[Jassi Brar]

On Wed, Oct 20, 2010 at 12:13 PM, Mark Brown
<broonie@opensource.wolfsonmicro.com> wrote:

>> struct s3c_audio_pdata is shared among I2S, AC97, SPDIF and PCM.
>> Here the idea is that controller drivers add specific structures to the union
>> as and when they need it.
>
> Right, what I'm saying is that it'd seem more natural to do things the
> other way around and embed the common structure within a device specific
> pdata structure instead of having the union.

Ok, will do it.


>> > Can we do this stuff with a variable storing the mask to use?  It might
>> > compress the code a lot but I've not looked at what the bits actually
>> > are.
>
>> sorry, I am unable to understand what you suggest
>
> If we have something in the driver data struct specifying the masks to
> use then set these at probe time rather than having the if statements -
> probably the same mask can be used for playback & record if the
> bitfields are lined up similarly.  This would then be:
>
>        con |= data->active_mask;
>        con &= ~data->pause_mask;
>
> or similar, possibly with some shifts.

Let me see if the space saved is worth the complication.


>> >> +     /* Allow LRCLK-inverted version of the supported formats */
>> >> +     switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
>> >> +     case SND_SOC_DAIFMT_NB_NF:
>> >> +             break;
>> >> +     case SND_SOC_DAIFMT_NB_IF:
>> >> +             if (tmp & MOD_LR_RLOW)
>> >> +                     tmp &= ~MOD_LR_RLOW;
>> >> +             else
>> >> +                     tmp |= MOD_LR_RLOW;
>> >> +             break;
>
>> > This looks a bit odd - it'll flip MOD_LR_FLOW if the frame is inverted,
>> > I'd expect it to want to set a specific value?
>
>> The frame polarity is specified by the Format(I2S, LSB, MSB), so we
>> set/clear MOD_LR_RLOW acc to the Format requested.
>> The Inversion request works relative to the Format -- if Frame inversion
>> is requested, we simply flip it from the value set during Format setting.
>
> Please add a comment explaining that you're inverting the orientation
> you set previously - it's really surprising when reading the code.

Ok, I'll add a comment.
Btw, isn't it the standard way? Don't other I2S CPU drivers do the same thing ?


>> ASoC machine drivers need to index the secondary dai that is
>> automatically created and registered by the cpu driver.
>> So, it needs to be available outside.
>> I'll make it SAMSUNG_I2S_SECOFF -- secondary offset of I2S(?)
>
> How would the index be used with multi-component?

For example, please look at [Patch 23/25]

+               /* Secondary is at offset MAX_I2S from Primary */
+               str = (char *)smdk_dai[SEC_PLAYBACK].cpu_dai_name;
+               str[strlen(str) - 1] = '0' + MAX_I2S;


Thanks.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: [PATCH 11/25] ASoC: Samsung: Add common I2S driver

[Mark Brown]

On Wed, Oct 20, 2010 at 12:27:43PM +0900, Jassi Brar wrote:
> On Wed, Oct 20, 2010 at 12:13 PM, Mark Brown

> > If we have something in the driver data struct specifying the masks to
> > use then set these at probe time rather than having the if statements -
> > probably the same mask can be used for playback & record if the
> > bitfields are lined up similarly.  This would then be:

> >        con |= data->active_mask;
> >        con &= ~data->pause_mask;

> > or similar, possibly with some shifts.

> Let me see if the space saved is worth the complication.

I was thinking it should make something similar by making it clear that
we're just doing the same thing to a different location rather than lots
of conditional code to follow.

> > Please add a comment explaining that you're inverting the orientation
> > you set previously - it's really surprising when reading the code.

> Ok, I'll add a comment.
> Btw, isn't it the standard way? Don't other I2S CPU drivers do the same thing ?

Not commonly - normally people don't implement anything except plain I2S
mode, or have explict mode and inversion bits (so the mode sets the
expected polarity and then the inversion bit swaps that).

> > How would the index be used with multi-component?

> For example, please look at [Patch 23/25]

> +               /* Secondary is at offset MAX_I2S from Primary */
> +               str = (char *)smdk_dai[SEC_PLAYBACK].cpu_dai_name;
> +               str[strlen(str) - 1] = '0' + MAX_I2S;

Hrm, slightly fiddly.  Perhaps we want a function people can call which
will generate the secondary DAI name for you?  Might be more directly
what people want.

Re: [PATCH 11/25] ASoC: Samsung: Add common I2S driver

[Jassi Brar]

On Wed, Oct 20, 2010 at 1:01 PM, Mark Brown
<broonie@opensource.wolfsonmicro.com> wrote:
> On Wed, Oct 20, 2010 at 12:27:43PM +0900, Jassi Brar wrote:
>> On Wed, Oct 20, 2010 at 12:13 PM, Mark Brown
>
>> > If we have something in the driver data struct specifying the masks to
>> > use then set these at probe time rather than having the if statements -
>> > probably the same mask can be used for playback & record if the
>> > bitfields are lined up similarly.  This would then be:
>
>> >        con |= data->active_mask;
>> >        con &= ~data->pause_mask;
>
>> > or similar, possibly with some shifts.
>
>> Let me see if the space saved is worth the complication.
>
> I was thinking it should make something similar by making it clear that
> we're just doing the same thing to a different location rather than lots
> of conditional code to follow.

In this case it doesn't fit very neatly. So I am dropping the suggestion, sorry.


>> > How would the index be used with multi-component?
>
>> For example, please look at [Patch 23/25]
>
>> +               /* Secondary is at offset MAX_I2S from Primary */
>> +               str = (char *)smdk_dai[SEC_PLAYBACK].cpu_dai_name;
>> +               str[strlen(str) - 1] = '0' + MAX_I2S;
>
> Hrm, slightly fiddly.  Perhaps we want a function people can call which
> will generate the secondary DAI name for you?  Might be more directly
> what people want.

We already have to decide on platform_device's id in probe while creating the
secondary dai in CPU driver. So there must exist any such predefined offset in
the common driver.
So, I decided to reuse the symbol and save one addition to the API.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: [PATCH 11/25] ASoC: Samsung: Add common I2S driver

[Mark Brown]

On Fri, Oct 22, 2010 at 04:39:05PM +0900, Jassi Brar wrote:
> On Wed, Oct 20, 2010 at 1:01 PM, Mark Brown

> >> +               /* Secondary is at offset MAX_I2S from Primary */
> >> +               str = (char *)smdk_dai[SEC_PLAYBACK].cpu_dai_name;
> >> +               str[strlen(str) - 1] = '0' + MAX_I2S;

> > Hrm, slightly fiddly.  Perhaps we want a function people can call which
> > will generate the secondary DAI name for you?  Might be more directly
> > what people want.

> We already have to decide on platform_device's id in probe while creating the
> secondary dai in CPU driver. So there must exist any such predefined offset in
> the common driver.
> So, I decided to reuse the symbol and save one addition to the API.

Would it not be nicer to give a different name to the DAI?

[PATCH 12/25] ARM: S3C64XX: I2S: Upgrade platform device

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Add more information to I2S platform_devices in order to
prepare them for new controller driver.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 arch/arm/mach-s3c64xx/clock.c     |    2 +-
 arch/arm/mach-s3c64xx/dev-audio.c |   62 +++++++++++++++++++++----------------
 2 files changed, 36 insertions(+), 28 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 7e03f0a..1c98d2f 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -695,7 +695,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk	= {
 			.name		= "audio-bus",
-			.id		= -1,  /* There's only one IISv4 port */
+			.id		= 2,
 			.ctrlbit        = S3C6410_CLKCON_SCLK_AUDIO2,
 			.enable		= s3c64xx_sclk_ctrl,
 		},
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index 01dda91..c2ad04c 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -27,7 +27,12 @@
 #include <mach/gpio-bank-e.h>
 #include <mach/gpio-bank-h.h>
 
-static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
+static const char *rclksrc[] = {
+	[0] = "iis",
+	[1] = "audio-bus",
+};
+
+static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
 {
 	switch (pdev->id) {
 	case 0:
@@ -44,6 +49,15 @@ static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
 		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_I2S1_DI);
 		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_I2S1_D0);
 		break;
+	case 2:
+		s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_I2S_V40_DO0);
+		s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_I2S_V40_DO1);
+		s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C64XX_GPC7_I2S_V40_DO2);
+		s3c_gpio_cfgpin(S3C64XX_GPH(6), S3C64XX_GPH6_I2S_V40_BCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPH(7), S3C64XX_GPH7_I2S_V40_CDCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPH(8), S3C64XX_GPH8_I2S_V40_LRCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPH(9), S3C64XX_GPH9_I2S_V40_DI);
+		break;
 	default:
 		printk(KERN_DEBUG "Invalid I2S Controller number: %d\n",
 			pdev->id);
@@ -53,19 +67,6 @@ static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
 	return 0;
 }
 
-static int s3c64xx_i2sv4_cfg_gpio(struct platform_device *pdev)
-{
-	s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_I2S_V40_DO0);
-	s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_I2S_V40_DO1);
-	s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C64XX_GPC7_I2S_V40_DO2);
-	s3c_gpio_cfgpin(S3C64XX_GPH(6), S3C64XX_GPH6_I2S_V40_BCLK);
-	s3c_gpio_cfgpin(S3C64XX_GPH(7), S3C64XX_GPH7_I2S_V40_CDCLK);
-	s3c_gpio_cfgpin(S3C64XX_GPH(8), S3C64XX_GPH8_I2S_V40_LRCLK);
-	s3c_gpio_cfgpin(S3C64XX_GPH(9), S3C64XX_GPH9_I2S_V40_DI);
-
-	return 0;
-}
-
 static struct resource s3c64xx_iis0_resource[] = {
 	[0] = {
 		.start = S3C64XX_PA_IIS0,
@@ -84,8 +85,13 @@ static struct resource s3c64xx_iis0_resource[] = {
 	},
 };
 
-static struct s3c_audio_pdata s3c_i2s0_pdata = {
-	.cfg_gpio = s3c64xx_i2sv3_cfg_gpio,
+static struct s3c_audio_pdata i2sv3_pdata = {
+	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
+	.type = {
+		.i2s = {
+			.src_clk = rclksrc,
+		},
+	},
 };
 
 struct platform_device s3c64xx_device_iis0 = {
@@ -94,7 +100,7 @@ struct platform_device s3c64xx_device_iis0 = {
 	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
 	.resource	  = s3c64xx_iis0_resource,
 	.dev = {
-		.platform_data = &s3c_i2s0_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 EXPORT_SYMBOL(s3c64xx_device_iis0);
@@ -117,17 +123,13 @@ static struct resource s3c64xx_iis1_resource[] = {
 	},
 };
 
-static struct s3c_audio_pdata s3c_i2s1_pdata = {
-	.cfg_gpio = s3c64xx_i2sv3_cfg_gpio,
-};
-
 struct platform_device s3c64xx_device_iis1 = {
 	.name		  = "samsung-i2s",
 	.id		  = 1,
 	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
 	.resource	  = s3c64xx_iis1_resource,
 	.dev = {
-		.platform_data = &s3c_i2s1_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 EXPORT_SYMBOL(s3c64xx_device_iis1);
@@ -150,17 +152,23 @@ static struct resource s3c64xx_iisv4_resource[] = {
 	},
 };
 
-static struct s3c_audio_pdata s3c_i2sv4_pdata = {
-	.cfg_gpio = s3c64xx_i2sv4_cfg_gpio,
+static struct s3c_audio_pdata i2sv4_pdata = {
+	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_PRI_6CHAN,
+			.src_clk = rclksrc,
+		},
+	},
 };
 
 struct platform_device s3c64xx_device_iisv4 = {
-	.name		  = "samsung-i2s-v4",
-	.id		  = -1,
+	.name		  = "samsung-i2s",
+	.id		  = 2,
 	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
 	.resource	  = s3c64xx_iisv4_resource,
 	.dev = {
-		.platform_data = &s3c_i2sv4_pdata,
+		.platform_data = &i2sv4_pdata,
 	},
 };
 EXPORT_SYMBOL(s3c64xx_device_iisv4);
-- 
1.6.2.5

[PATCH 13/25] ARM: S5P6440: I2S: Upgrade platform device

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Add more information to I2S platform_devices in order
to prepare them for new controller driver.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 arch/arm/mach-s5p6440/clock.c     |    2 +-
 arch/arm/mach-s5p6440/dev-audio.c |   21 ++++++++++++++++-----
 2 files changed, 17 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-s5p6440/clock.c b/arch/arm/mach-s5p6440/clock.c
index ca6e48d..a80a019 100644
--- a/arch/arm/mach-s5p6440/clock.c
+++ b/arch/arm/mach-s5p6440/clock.c
@@ -371,7 +371,7 @@ static struct clk init_clocks_disable[] = {
 		.enable		= s5p6440_pclk_ctrl,
 		.ctrlbit	= S5P_CLKCON_PCLK_IIC0,
 	}, {
-		.name		= "i2s_v40",
+		.name		= "iis",
 		.id		= 0,
 		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p6440_pclk_ctrl,
diff --git a/arch/arm/mach-s5p6440/dev-audio.c b/arch/arm/mach-s5p6440/dev-audio.c
index 5d98629..9d61f5d 100644
--- a/arch/arm/mach-s5p6440/dev-audio.c
+++ b/arch/arm/mach-s5p6440/dev-audio.c
@@ -19,11 +19,16 @@
 #include <mach/dma.h>
 #include <mach/irqs.h>
 
+static const char *rclksrc[] = {
+	[0] = "iis",
+	[1] = "sclk_audio2",
+};
+
 static int s5p6440_cfg_i2s(struct platform_device *pdev)
 {
 	/* configure GPIO for i2s port */
 	switch (pdev->id) {
-	case -1:
+	case 0:
 		s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5));
 		s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5));
 		s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5));
@@ -41,8 +46,14 @@ static int s5p6440_cfg_i2s(struct platform_device *pdev)
 	return 0;
 }
 
-static struct s3c_audio_pdata s3c_i2s_pdata = {
+static struct s3c_audio_pdata i2sv4_pdata = {
 	.cfg_gpio = s5p6440_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_PRI_6CHAN,
+			.src_clk = rclksrc,
+		},
+	},
 };
 
 static struct resource s5p6440_iis0_resource[] = {
@@ -64,12 +75,12 @@ static struct resource s5p6440_iis0_resource[] = {
 };
 
 struct platform_device s5p6440_device_iis = {
-	.name		  = "samsung-i2s-v4",
-	.id		  = -1,
+	.name		  = "samsung-i2s",
+	.id		  = 0,
 	.num_resources	  = ARRAY_SIZE(s5p6440_iis0_resource),
 	.resource	  = s5p6440_iis0_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv4_pdata,
 	},
 };
 
-- 
1.6.2.5

[PATCH 14/25] ARM: S5P6442: I2S: Upgrade platform device

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Add more information to I2S platform_devices in order
to prepare them for new controller driver.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 arch/arm/mach-s5p6442/dev-audio.c |   44 ++++++++++++++++++++++++++++++------
 1 files changed, 36 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-s5p6442/dev-audio.c b/arch/arm/mach-s5p6442/dev-audio.c
index 1419442..b91463e 100644
--- a/arch/arm/mach-s5p6442/dev-audio.c
+++ b/arch/arm/mach-s5p6442/dev-audio.c
@@ -30,15 +30,13 @@ static int s5p6442_cfg_i2s(struct platform_device *pdev)
 		s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(2));
 		s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(2));
 		break;
-
-	case -1:
+	case 0:
 		s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(2));
 		s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(2));
 		s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(2));
 		s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(2));
 		s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(2));
 		break;
-
 	default:
 		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
 		return -EINVAL;
@@ -47,8 +45,19 @@ static int s5p6442_cfg_i2s(struct platform_device *pdev)
 	return 0;
 }
 
-static struct s3c_audio_pdata s3c_i2s_pdata = {
+static const char *rclksrc_v35[] = {
+	[0] = "busclk",
+	[1] = "i2sclk",
+};
+
+static struct s3c_audio_pdata i2sv35_pdata = {
 	.cfg_gpio = s5p6442_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR,
+			.src_clk = rclksrc_v35,
+		},
+	},
 };
 
 static struct resource s5p6442_iis0_resource[] = {
@@ -67,15 +76,34 @@ static struct resource s5p6442_iis0_resource[] = {
 		.end   = DMACH_I2S0_RX,
 		.flags = IORESOURCE_DMA,
 	},
+	[3] = {
+		.start = DMACH_I2S0S_TX,
+		.end   = DMACH_I2S0S_TX,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
 struct platform_device s5p6442_device_iis0 = {
-	.name		  = "samsung-i2s-v4",
-	.id		  = -1,
+	.name		  = "samsung-i2s",
+	.id		  = 0,
 	.num_resources	  = ARRAY_SIZE(s5p6442_iis0_resource),
 	.resource	  = s5p6442_iis0_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv35_pdata,
+	},
+};
+
+static const char *rclksrc_v3[] = {
+	[0] = "iis",
+	[1] = "sclk_audio",
+};
+
+static struct s3c_audio_pdata i2sv3_pdata = {
+	.cfg_gpio = s5p6442_cfg_i2s,
+	.type = {
+		.i2s = {
+			.src_clk = rclksrc_v3,
+		},
 	},
 };
 
@@ -103,7 +131,7 @@ struct platform_device s5p6442_device_iis1 = {
 	.num_resources	  = ARRAY_SIZE(s5p6442_iis1_resource),
 	.resource	  = s5p6442_iis1_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 
-- 
1.6.2.5

[PATCH 15/25] ARM: S5PC100: I2S: Upgrade platform device

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Add more information to I2S platform_devices in order to
prepare them for new controller driver.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 arch/arm/mach-s5pc100/dev-audio.c |   50 ++++++++++++++++++++++++++++--------
 1 files changed, 39 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c
index 3cf22ff..e14137b 100644
--- a/arch/arm/mach-s5pc100/dev-audio.c
+++ b/arch/arm/mach-s5pc100/dev-audio.c
@@ -23,6 +23,8 @@ static int s5pc100_cfg_i2s(struct platform_device *pdev)
 {
 	/* configure GPIO for i2s port */
 	switch (pdev->id) {
+	case 0: /* Dedicated pins */
+		break;
 	case 1:
 		s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(2));
 		s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(2));
@@ -30,7 +32,6 @@ static int s5pc100_cfg_i2s(struct platform_device *pdev)
 		s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(2));
 		s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(2));
 		break;
-
 	case 2:
 		s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(4));
 		s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(4));
@@ -38,10 +39,6 @@ static int s5pc100_cfg_i2s(struct platform_device *pdev)
 		s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(4));
 		s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(4));
 		break;
-
-	case -1: /* Dedicated pins */
-		break;
-
 	default:
 		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
 		return -EINVAL;
@@ -50,8 +47,20 @@ static int s5pc100_cfg_i2s(struct platform_device *pdev)
 	return 0;
 }
 
-static struct s3c_audio_pdata s3c_i2s_pdata = {
+static const char *rclksrc_v5[] = {
+	[0] = "iis",
+	[1] = "i2sclkd2",
+};
+
+static struct s3c_audio_pdata i2sv5_pdata = {
 	.cfg_gpio = s5pc100_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
+					 | QUIRK_NEED_RSTCLR,
+			.src_clk = rclksrc_v5,
+		},
+	},
 };
 
 static struct resource s5pc100_iis0_resource[] = {
@@ -70,15 +79,34 @@ static struct resource s5pc100_iis0_resource[] = {
 		.end   = DMACH_I2S0_RX,
 		.flags = IORESOURCE_DMA,
 	},
+	[3] = {
+		.start = DMACH_I2S0S_TX,
+		.end   = DMACH_I2S0S_TX,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
 struct platform_device s5pc100_device_iis0 = {
-	.name		  = "samsung-i2s-v4",
-	.id		  = -1,
+	.name		  = "samsung-i2s",
+	.id		  = 0,
 	.num_resources	  = ARRAY_SIZE(s5pc100_iis0_resource),
 	.resource	  = s5pc100_iis0_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv5_pdata,
+	},
+};
+
+static const char *rclksrc_v3[] = {
+	[0] = "iis",
+	[1] = "sclk_audio",
+};
+
+static struct s3c_audio_pdata i2sv3_pdata = {
+	.cfg_gpio = s5pc100_cfg_i2s,
+	.type = {
+		.i2s = {
+			.src_clk = rclksrc_v3,
+		},
 	},
 };
 
@@ -106,7 +134,7 @@ struct platform_device s5pc100_device_iis1 = {
 	.num_resources	  = ARRAY_SIZE(s5pc100_iis1_resource),
 	.resource	  = s5pc100_iis1_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 
@@ -134,7 +162,7 @@ struct platform_device s5pc100_device_iis2 = {
 	.num_resources	  = ARRAY_SIZE(s5pc100_iis2_resource),
 	.resource	  = s5pc100_iis2_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 
-- 
1.6.2.5

[PATCH 16/25] ARM: S5PV210: I2S: Upgrade platform device

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Add more information to I2S platform_devices in order
to prepare them for new controller driver.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 arch/arm/mach-s5pv210/clock.c     |   10 +++---
 arch/arm/mach-s5pv210/dev-audio.c |   64 ++++++++++++++++++++++++++----------
 2 files changed, 51 insertions(+), 23 deletions(-)

diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index af91fef..e5b8061 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -401,20 +401,20 @@ static struct clk init_clocks_disable[] = {
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<21),
 	}, {
-		.name		= "i2s_v50",
+		.name		= "iis",
 		.id		= 0,
 		.parent		= &clk_p,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<4),
 	}, {
-		.name		= "i2s_v32",
-		.id		= 0,
+		.name		= "iis",
+		.id		= 1,
 		.parent		= &clk_p,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1 << 5),
 	}, {
-		.name		= "i2s_v32",
-		.id		= 1,
+		.name		= "iis",
+		.id		= 2,
 		.parent		= &clk_p,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1 << 6),
diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c
index 6e60041..d5f5361 100644
--- a/arch/arm/mach-s5pv210/dev-audio.c
+++ b/arch/arm/mach-s5pv210/dev-audio.c
@@ -19,10 +19,24 @@
 #include <mach/dma.h>
 #include <mach/irqs.h>
 
+static const char *rclksrc[] = {
+	[0] = "busclk",
+	[1] = "i2sclk",
+};
+
 static int s5pv210_cfg_i2s(struct platform_device *pdev)
 {
 	/* configure GPIO for i2s port */
 	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPI(5), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPI(6), S3C_GPIO_SFN(2));
+		break;
 	case 1:
 		s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(2));
 		s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(2));
@@ -30,7 +44,6 @@ static int s5pv210_cfg_i2s(struct platform_device *pdev)
 		s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(2));
 		s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(2));
 		break;
-
 	case 2:
 		s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(4));
 		s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(4));
@@ -38,17 +51,6 @@ static int s5pv210_cfg_i2s(struct platform_device *pdev)
 		s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(4));
 		s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(4));
 		break;
-
-	case -1:
-		s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPI(5), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPI(6), S3C_GPIO_SFN(2));
-		break;
-
 	default:
 		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
 		return -EINVAL;
@@ -57,8 +59,15 @@ static int s5pv210_cfg_i2s(struct platform_device *pdev)
 	return 0;
 }
 
-static struct s3c_audio_pdata s3c_i2s_pdata = {
+static struct s3c_audio_pdata i2sv5_pdata = {
 	.cfg_gpio = s5pv210_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quriks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
+					 | QUIRK_NEED_RSTCLR,
+			.src_clk = rclksrc,
+		},
+	},
 };
 
 static struct resource s5pv210_iis0_resource[] = {
@@ -77,15 +86,34 @@ static struct resource s5pv210_iis0_resource[] = {
 		.end   = DMACH_I2S0_RX,
 		.flags = IORESOURCE_DMA,
 	},
+	[3] = {
+		.start = DMACH_I2S0S_TX,
+		.end   = DMACH_I2S0S_TX,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
 struct platform_device s5pv210_device_iis0 = {
-	.name		  = "samsung-i2s-v4",
-	.id		  = -1,
+	.name		  = "samsung-i2s",
+	.id		  = 0,
 	.num_resources	  = ARRAY_SIZE(s5pv210_iis0_resource),
 	.resource	  = s5pv210_iis0_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv5_pdata,
+	},
+};
+
+static const char *rclksrc_v3[] = {
+	[0] = "iis",
+	[1] = "audio-bus",
+};
+
+static struct s3c_audio_pdata i2sv3_pdata = {
+	.cfg_gpio = s5pv210_cfg_i2s,
+	.type = {
+		.i2s = {
+			.src_clk = rclksrc_v3,
+		},
 	},
 };
 
@@ -113,7 +141,7 @@ struct platform_device s5pv210_device_iis1 = {
 	.num_resources	  = ARRAY_SIZE(s5pv210_iis1_resource),
 	.resource	  = s5pv210_iis1_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 
@@ -141,7 +169,7 @@ struct platform_device s5pv210_device_iis2 = {
 	.num_resources	  = ARRAY_SIZE(s5pv210_iis2_resource),
 	.resource	  = s5pv210_iis2_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 
-- 
1.6.2.5

[PATCH 17/25] ARM: S5PV310: Add audio platform devices

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Define platform devices for all audio devices found on S5PV310

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 arch/arm/mach-s5pv310/Makefile    |    1 +
 arch/arm/mach-s5pv310/dev-audio.c |  356 +++++++++++++++++++++++++++++++++++++
 2 files changed, 357 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-s5pv310/dev-audio.c

diff --git a/arch/arm/mach-s5pv310/Makefile b/arch/arm/mach-s5pv310/Makefile
index d5b51c7..b511650 100644
--- a/arch/arm/mach-s5pv310/Makefile
+++ b/arch/arm/mach-s5pv310/Makefile
@@ -26,5 +26,6 @@ obj-$(CONFIG_MACH_UNIVERSAL_C210)	+= mach-universal_c210.o
 
 # device support
 
+obj-y += dev-audio.o
 obj-$(CONFIG_S5PV310_SETUP_I2C1)	+= setup-i2c1.o
 obj-$(CONFIG_S5PV310_SETUP_I2C2)	+= setup-i2c2.o
diff --git a/arch/arm/mach-s5pv310/dev-audio.c b/arch/arm/mach-s5pv310/dev-audio.c
new file mode 100644
index 0000000..ebb9f73
--- /dev/null
+++ b/arch/arm/mach-s5pv310/dev-audio.c
@@ -0,0 +1,356 @@
+/* linux/arch/arm/mach-s5pv310/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static const char *rclksrc_v5[] = {
+	[0] = "busclk",
+	[1] = "i2sclk",
+};
+
+static int s5pv310_cfg_i2s(struct platform_device *pdev)
+{
+	/* configure GPIO for i2s port */
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5PV310_GPZ(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV310_GPZ(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV310_GPZ(2), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV310_GPZ(3), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV310_GPZ(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV310_GPZ(5), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV310_GPZ(6), S3C_GPIO_SFN(2));
+		break;
+	case 1:
+		s3c_gpio_cfgpin(S5PV310_GPC0(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV310_GPC0(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV310_GPC0(2), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV310_GPC0(3), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV310_GPC0(4), S3C_GPIO_SFN(2));
+		break;
+	case 2:
+		s3c_gpio_cfgpin(S5PV310_GPC1(0), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PV310_GPC1(1), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PV310_GPC1(2), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PV310_GPC1(3), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PV310_GPC1(4), S3C_GPIO_SFN(4));
+		break;
+	default:
+		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata i2sv5_pdata = {
+	.cfg_gpio = s5pv310_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
+					 | QUIRK_NEED_RSTCLR,
+			.src_clk = rclksrc_v5,
+		},
+	},
+};
+
+static struct resource s5pv310_iis0_resource[] = {
+	[0] = {
+		.start = S5PV310_PA_IIS0,
+		.end   = S5PV310_PA_IIS0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S0_TX,
+		.end   = DMACH_I2S0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S0_RX,
+		.end   = DMACH_I2S0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = DMACH_I2S0S_TX,
+		.end   = DMACH_I2S0S_TX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv310_device_iis0 = {
+	.name		  = "samsung-i2s",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5pv310_iis0_resource),
+	.resource	  = s5pv310_iis0_resource,
+	.dev = {
+		.platform_data = &i2sv5_pdata,
+	},
+};
+
+static const char *rclksrc_v3[] = {
+	[0] = "sclk_i2s",
+	[1] = "no_such_clock",
+};
+
+static struct s3c_audio_pdata i2sv3_pdata = {
+	.cfg_gpio = s5pv310_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_NO_MUXPSR,
+			.src_clk = rclksrc_v3,
+		},
+	},
+};
+
+static struct resource s5pv310_iis1_resource[] = {
+	[0] = {
+		.start = S5PV310_PA_IIS1,
+		.end   = S5PV310_PA_IIS1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S1_TX,
+		.end   = DMACH_I2S1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S1_RX,
+		.end   = DMACH_I2S1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv310_device_iis1 = {
+	.name		  = "samsung-i2s",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5pv310_iis1_resource),
+	.resource	  = s5pv310_iis1_resource,
+	.dev = {
+		.platform_data = &i2sv3_pdata,
+	},
+};
+
+static struct resource s5pv310_iis2_resource[] = {
+	[0] = {
+		.start = S5PV310_PA_IIS2,
+		.end   = S5PV310_PA_IIS2 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S2_TX,
+		.end   = DMACH_I2S2_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S2_RX,
+		.end   = DMACH_I2S2_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv310_device_iis2 = {
+	.name		  = "samsung-i2s",
+	.id		  = 2,
+	.num_resources	  = ARRAY_SIZE(s5pv310_iis2_resource),
+	.resource	  = s5pv310_iis2_resource,
+	.dev = {
+		.platform_data = &i2sv3_pdata,
+	},
+};
+
+/* PCM Controller platform_devices */
+
+static int s5pv310_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5PV310_GPZ(0), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV310_GPZ(1), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV310_GPZ(2), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV310_GPZ(3), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV310_GPZ(4), S3C_GPIO_SFN(3));
+		break;
+	case 1:
+		s3c_gpio_cfgpin(S5PV310_GPC0(0), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV310_GPC0(1), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV310_GPC0(2), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV310_GPC0(3), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV310_GPC0(4), S3C_GPIO_SFN(3));
+		break;
+	case 2:
+		s3c_gpio_cfgpin(S5PV310_GPC1(0), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV310_GPC1(1), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV310_GPC1(2), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV310_GPC1(3), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV310_GPC1(4), S3C_GPIO_SFN(3));
+		break;
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_pcm_pdata = {
+	.cfg_gpio = s5pv310_pcm_cfg_gpio,
+};
+
+static struct resource s5pv310_pcm0_resource[] = {
+	[0] = {
+		.start = S5PV310_PA_PCM0,
+		.end   = S5PV310_PA_PCM0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM0_TX,
+		.end   = DMACH_PCM0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM0_RX,
+		.end   = DMACH_PCM0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv310_device_pcm0 = {
+	.name		  = "samsung-pcm",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5pv310_pcm0_resource),
+	.resource	  = s5pv310_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+static struct resource s5pv310_pcm1_resource[] = {
+	[0] = {
+		.start = S5PV310_PA_PCM1,
+		.end   = S5PV310_PA_PCM1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM1_TX,
+		.end   = DMACH_PCM1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM1_RX,
+		.end   = DMACH_PCM1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv310_device_pcm1 = {
+	.name		  = "samsung-pcm",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5pv310_pcm1_resource),
+	.resource	  = s5pv310_pcm1_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+static struct resource s5pv310_pcm2_resource[] = {
+	[0] = {
+		.start = S5PV310_PA_PCM2,
+		.end   = S5PV310_PA_PCM2 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM2_TX,
+		.end   = DMACH_PCM2_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM2_RX,
+		.end   = DMACH_PCM2_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv310_device_pcm2 = {
+	.name		  = "samsung-pcm",
+	.id		  = 2,
+	.num_resources	  = ARRAY_SIZE(s5pv310_pcm2_resource),
+	.resource	  = s5pv310_pcm2_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+/* AC97 Controller platform devices */
+
+static int s5pv310_ac97_cfg_gpio(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin(S5PV310_GPC0(0), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PV310_GPC0(1), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PV310_GPC0(2), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PV310_GPC0(3), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PV310_GPC0(4), S3C_GPIO_SFN(4));
+
+	return 0;
+}
+
+static struct resource s5pv310_ac97_resource[] = {
+	[0] = {
+		.start = S5PV310_PA_AC97,
+		.end   = S5PV310_PA_AC97 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_AC97_PCMOUT,
+		.end   = DMACH_AC97_PCMOUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_AC97_PCMIN,
+		.end   = DMACH_AC97_PCMIN,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = DMACH_AC97_MICIN,
+		.end   = DMACH_AC97_MICIN,
+		.flags = IORESOURCE_DMA,
+	},
+	[4] = {
+		.start = IRQ_AC97,
+		.end   = IRQ_AC97,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata = {
+	.cfg_gpio = s5pv310_ac97_cfg_gpio,
+};
+
+static u64 s5pv310_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pv310_device_ac97 = {
+	.name		  = "samsung-ac97",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s5pv310_ac97_resource),
+	.resource	  = s5pv310_ac97_resource,
+	.dev = {
+		.platform_data = &s3c_ac97_pdata,
+		.dma_mask = &s5pv310_ac97_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
-- 
1.6.2.5

[PATCH 18/25] ASoC: SMARTQ: Move to use new I2S driver

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Modify the smartq_wm8987.c to use new i2s controller driver.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 sound/soc/s3c24xx/Kconfig         |    2 +-
 sound/soc/s3c24xx/smartq_wm8987.c |   25 +++++++++++--------------
 2 files changed, 12 insertions(+), 15 deletions(-)

diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index 20fe288..e7fad53 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -144,7 +144,7 @@ config SND_SOC_SMDK_WM9713
 config SND_S3C64XX_SOC_SMARTQ
 	tristate "SoC I2S Audio support for SmartQ board"
 	depends on SND_S3C24XX_SOC && MACH_SMARTQ
-	select SND_S3C64XX_SOC_I2S
+	select SND_SAMSUNG_I2S
 	select SND_SOC_WM8750
 
 config SND_SOC_GONI_AQUILA_WM8994
diff --git a/sound/soc/s3c24xx/smartq_wm8987.c b/sound/soc/s3c24xx/smartq_wm8987.c
index 1d55312..5fcc420 100644
--- a/sound/soc/s3c24xx/smartq_wm8987.c
+++ b/sound/soc/s3c24xx/smartq_wm8987.c
@@ -25,7 +25,7 @@
 #include <asm/mach-types.h>
 
 #include "dma.h"
-#include "s3c64xx-i2s.h"
+#include "i2s.h"
 
 #include "../codecs/wm8750.h"
 
@@ -41,13 +41,9 @@ static int smartq_hifi_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
-	struct s3c_i2sv2_rate_calc div;
 	unsigned int clk = 0;
 	int ret;
 
-	s3c_i2sv2_iis_calc_rate(&div, NULL, params_rate(params),
-				s3c_i2sv2_get_clock(cpu_dai));
-
 	switch (params_rate(params)) {
 	case 8000:
 	case 16000:
@@ -78,20 +74,21 @@ static int smartq_hifi_hw_params(struct snd_pcm_substream *substream,
 	if (ret < 0)
 		return ret;
 
-	/* set the codec system clock for DAC and ADC */
-	ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
-				     SND_SOC_CLOCK_IN);
+	/* Use PCLK for I2S signal generation */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_RCLKSRC_0,
+					0, SND_SOC_CLOCK_IN);
 	if (ret < 0)
 		return ret;
 
-	/* set MCLK division for sample rate */
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_I2SV2_DIV_RCLK, div.fs_div);
+	/* Gate the RCLK output on PAD */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_CDCLK,
+					0, SND_SOC_CLOCK_IN);
 	if (ret < 0)
 		return ret;
 
-	/* set prescaler division for sample rate */
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_I2SV2_DIV_PRESCALER,
-				     div.clk_div - 1);
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
+				     SND_SOC_CLOCK_IN);
 	if (ret < 0)
 		return ret;
 
@@ -211,7 +208,7 @@ static struct snd_soc_dai_link smartq_dai[] = {
 	{
 		.name		= "wm8987",
 		.stream_name	= "SmartQ Hi-Fi",
-		.cpu_dai_name	= "s3c64xx-i2s.0",
+		.cpu_dai_name	= "samsung-i2s.0",
 		.codec_dai_name	= "wm8750-hifi",
 		.platform_name	= "samsung-audio",
 		.codec_name	= "wm8750-codec.0-0x1a",
-- 
1.6.2.5

[PATCH 19/25] ASoC: GONI: Move to use new I2S driver

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Modify the goni_wm8994.c to use new i2s controller driver.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 sound/soc/s3c24xx/Kconfig       |    2 +-
 sound/soc/s3c24xx/goni_wm8994.c |   10 ++--------
 2 files changed, 3 insertions(+), 9 deletions(-)

diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index e7fad53..f12e7c8 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -150,7 +150,7 @@ config SND_S3C64XX_SOC_SMARTQ
 config SND_SOC_GONI_AQUILA_WM8994
 	tristate "SoC I2S Audio support for AQUILA/GONI - WM8994"
 	depends on SND_S3C24XX_SOC && (MACH_GONI || MACH_AQUILA)
-	select SND_S3C64XX_SOC_I2S_V4
+	select SND_SAMSUNG_I2S
 	select SND_SOC_WM8994
 	help
 	  Say Y if you want to add support for SoC audio on goni or aquila
diff --git a/sound/soc/s3c24xx/goni_wm8994.c b/sound/soc/s3c24xx/goni_wm8994.c
index 201056c..dcaf7c3 100644
--- a/sound/soc/s3c24xx/goni_wm8994.c
+++ b/sound/soc/s3c24xx/goni_wm8994.c
@@ -26,7 +26,7 @@
 #include <linux/mfd/wm8994/registers.h>
 #include "../codecs/wm8994.h"
 #include "dma.h"
-#include "s3c64xx-i2s.h"
+#include "i2s.h"
 
 #define MACHINE_NAME	0
 #define CPU_VOICE_DAI	1
@@ -163,12 +163,6 @@ static int goni_hifi_hw_params(struct snd_pcm_substream *substream,
 	if (ret < 0)
 		return ret;
 
-	/* set the cpu system clock */
-	ret = snd_soc_dai_set_sysclk(cpu_dai, S3C64XX_CLKSRC_PCLK,
-			0, SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
 	/* set codec DAI configuration */
 	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
 			SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
@@ -249,7 +243,7 @@ static struct snd_soc_dai_link goni_dai[] = {
 {
 	.name = "WM8994",
 	.stream_name = "WM8994 HiFi",
-	.cpu_dai_name = "s3c64xx-i2s-v4",
+	.cpu_dai_name = "samsung-i2s.0",
 	.codec_dai_name = "wm8994-hifi",
 	.platform_name = "samsung-audio",
 	.codec_name = "wm8994-codec.0-0x1a",
-- 
1.6.2.5

[PATCH 20/25] ASoC: SMDK64XX: Move to use new I2S driver

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Modify the smdk64xx_wm8580.c to use new i2s controller driver.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 sound/soc/s3c24xx/Kconfig           |    2 +-
 sound/soc/s3c24xx/smdk64xx_wm8580.c |   25 +++----------------------
 2 files changed, 4 insertions(+), 23 deletions(-)

diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index f12e7c8..085a7b0 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -73,7 +73,7 @@ config SND_S3C64XX_SOC_WM8580
 	tristate "SoC I2S Audio support for WM8580 on SMDK64XX"
 	depends on SND_S3C24XX_SOC && MACH_SMDK6410
 	select SND_SOC_WM8580
-	select SND_S3C64XX_SOC_I2S_V4
+	select SND_SAMSUNG_I2S
 	help
 	  Say Y if you want to add support for SoC audio on the SMDK6410.
 
diff --git a/sound/soc/s3c24xx/smdk64xx_wm8580.c b/sound/soc/s3c24xx/smdk64xx_wm8580.c
index 1d59317..5f51db0 100644
--- a/sound/soc/s3c24xx/smdk64xx_wm8580.c
+++ b/sound/soc/s3c24xx/smdk64xx_wm8580.c
@@ -20,7 +20,7 @@
 
 #include "../codecs/wm8580.h"
 #include "dma.h"
-#include "s3c64xx-i2s.h"
+#include "i2s.h"
 
 /*
  * Default CFG switch settings to use this driver:
@@ -96,17 +96,6 @@ static int smdk64xx_hw_params(struct snd_pcm_substream *substream,
 	if (ret < 0)
 		return ret;
 
-	ret = snd_soc_dai_set_sysclk(cpu_dai, S3C64XX_CLKSRC_CDCLK,
-					0, SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	/* We use PCLK for basic ops in SoC-Slave mode */
-	ret = snd_soc_dai_set_sysclk(cpu_dai, S3C64XX_CLKSRC_PCLK,
-					0, SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
 	/* Set WM8580 to drive MCLK from its PLLA */
 	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK,
 					WM8580_CLKSRC_PLLA);
@@ -123,14 +112,6 @@ static int smdk64xx_hw_params(struct snd_pcm_substream *substream,
 	if (ret < 0)
 		return ret;
 
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_I2SV2_DIV_BCLK, bfs);
-	if (ret < 0)
-		return ret;
-
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_I2SV2_DIV_RCLK, rfs);
-	if (ret < 0)
-		return ret;
-
 	return 0;
 }
 
@@ -222,7 +203,7 @@ static struct snd_soc_dai_link smdk64xx_dai[] = {
 { /* Primary Playback i/f */
 	.name = "WM8580 PAIF RX",
 	.stream_name = "Playback",
-	.cpu_dai_name = "samsung-i2s-v4",
+	.cpu_dai_name = "samsung-i2s.2",
 	.codec_dai_name = "wm8580-hifi-playback",
 	.platform_name = "samsung-audio",
 	.codec_name = "wm8580-codec.0-001b",
@@ -232,7 +213,7 @@ static struct snd_soc_dai_link smdk64xx_dai[] = {
 { /* Primary Capture i/f */
 	.name = "WM8580 PAIF TX",
 	.stream_name = "Capture",
-	.cpu_dai_name = "samsung-i2s-v4",
+	.cpu_dai_name = "samsung-i2s.2",
 	.codec_dai_name = "wm8580-hifi-capture",
 	.platform_name = "samsung-audio",
 	.codec_name = "wm8580-codec.0-001b",
-- 
1.6.2.5

[PATCH 21/25] ASoC: S3C64XX: Remove obsoleted I2S drivers

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Now that we have better I2S CPU drivers and no need for the old
ones, discard them.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 sound/soc/s3c24xx/Kconfig          |   10 --
 sound/soc/s3c24xx/Makefile         |    4 -
 sound/soc/s3c24xx/s3c64xx-i2s-v4.c |  230 ----------------------------------
 sound/soc/s3c24xx/s3c64xx-i2s.c    |  242 ------------------------------------
 sound/soc/s3c24xx/s3c64xx-i2s.h    |   41 ------
 5 files changed, 0 insertions(+), 527 deletions(-)
 delete mode 100644 sound/soc/s3c24xx/s3c64xx-i2s-v4.c
 delete mode 100644 sound/soc/s3c24xx/s3c64xx-i2s.c
 delete mode 100644 sound/soc/s3c24xx/s3c64xx-i2s.h

diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index 085a7b0..32f1877 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -19,16 +19,6 @@ config SND_S3C2412_SOC_I2S
 	select SND_S3C_I2SV2_SOC
 	select S3C2410_DMA
 
-config SND_S3C64XX_SOC_I2S
-	tristate
-	select SND_S3C_I2SV2_SOC
-	select S3C64XX_DMA
-
-config SND_S3C64XX_SOC_I2S_V4
-	tristate
-	select SND_S3C_I2SV2_SOC
-	select S3C64XX_DMA
-
 config SND_S3C_SOC_PCM
 	tristate
 
diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile
index 1d6fc07..dac41ee 100644
--- a/sound/soc/s3c24xx/Makefile
+++ b/sound/soc/s3c24xx/Makefile
@@ -2,9 +2,7 @@
 snd-soc-s3c24xx-objs := dma.o
 snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o
 snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o
-snd-soc-s3c64xx-i2s-objs := s3c64xx-i2s.o
 snd-soc-ac97-objs := ac97.o
-snd-soc-s3c64xx-i2s-v4-objs := s3c64xx-i2s-v4.o
 snd-soc-s3c-i2s-v2-objs := s3c-i2s-v2.o
 snd-soc-samsung-spdif-objs := spdif.o
 snd-soc-pcm-objs := pcm.o
@@ -14,8 +12,6 @@ obj-$(CONFIG_SND_S3C24XX_SOC) += snd-soc-s3c24xx.o
 obj-$(CONFIG_SND_S3C24XX_SOC_I2S) += snd-soc-s3c24xx-i2s.o
 obj-$(CONFIG_SND_S3C_SOC_AC97) += snd-soc-ac97.o
 obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o
-obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += snd-soc-s3c64xx-i2s.o
-obj-$(CONFIG_SND_S3C64XX_SOC_I2S_V4) += snd-soc-s3c64xx-i2s-v4.o
 obj-$(CONFIG_SND_S3C_I2SV2_SOC) += snd-soc-s3c-i2s-v2.o
 obj-$(CONFIG_SND_S5P_SOC_SPDIF) += snd-soc-samsung-spdif.o
 obj-$(CONFIG_SND_S3C_SOC_PCM) += snd-soc-pcm.o
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s-v4.c b/sound/soc/s3c24xx/s3c64xx-i2s-v4.c
deleted file mode 100644
index 8a08041..0000000
--- a/sound/soc/s3c24xx/s3c64xx-i2s-v4.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/* sound/soc/s3c24xx/s3c64xx-i2s-v4.c
- *
- * ALSA SoC Audio Layer - S3C64XX I2Sv4 driver
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- * 	Author: Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <sound/soc.h>
-#include <sound/pcm_params.h>
-
-#include <plat/audio.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-
-#include "dma.h"
-#include "regs-i2s-v2.h"
-#include "s3c64xx-i2s.h"
-
-static struct s3c2410_dma_client s3c64xx_dma_client_out = {
-	.name		= "I2Sv4 PCM Stereo out"
-};
-
-static struct s3c2410_dma_client s3c64xx_dma_client_in = {
-	.name		= "I2Sv4 PCM Stereo in"
-};
-
-static struct s3c_dma_params s3c64xx_i2sv4_pcm_stereo_out;
-static struct s3c_dma_params s3c64xx_i2sv4_pcm_stereo_in;
-static struct s3c_i2sv2_info s3c64xx_i2sv4;
-
-static int s3c64xx_i2sv4_probe(struct snd_soc_dai *dai)
-{
-	struct s3c_i2sv2_info *i2s = &s3c64xx_i2sv4;
-	int ret = 0;
-
-	snd_soc_dai_set_drvdata(dai, i2s);
-
-	ret = s3c_i2sv2_probe(dai, i2s, i2s->base);
-
-	return ret;
-}
-
-static int s3c_i2sv4_hw_params(struct snd_pcm_substream *substream,
-				 struct snd_pcm_hw_params *params,
-				 struct snd_soc_dai *cpu_dai)
-{
-	struct s3c_i2sv2_info *i2s = snd_soc_dai_get_drvdata(cpu_dai);
-	struct s3c_dma_params *dma_data;
-	u32 iismod;
-
-	dev_dbg(cpu_dai->dev, "Entered %s\n", __func__);
-
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		dma_data = i2s->dma_playback;
-	else
-		dma_data = i2s->dma_capture;
-
-	snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
-
-	iismod = readl(i2s->regs + S3C2412_IISMOD);
-	dev_dbg(cpu_dai->dev, "%s: r: IISMOD: %x\n", __func__, iismod);
-
-	iismod &= ~S3C64XX_IISMOD_BLC_MASK;
-	switch (params_format(params)) {
-	case SNDRV_PCM_FORMAT_S8:
-		iismod |= S3C64XX_IISMOD_BLC_8BIT;
-		break;
-	case SNDRV_PCM_FORMAT_S16_LE:
-		break;
-	case SNDRV_PCM_FORMAT_S24_LE:
-		iismod |= S3C64XX_IISMOD_BLC_24BIT;
-		break;
-	}
-
-	writel(iismod, i2s->regs + S3C2412_IISMOD);
-	dev_dbg(cpu_dai->dev, "%s: w: IISMOD: %x\n", __func__, iismod);
-
-	return 0;
-}
-
-static struct snd_soc_dai_ops s3c64xx_i2sv4_dai_ops = {
-	.hw_params	= s3c_i2sv4_hw_params,
-};
-
-static struct snd_soc_dai_driver s3c64xx_i2s_v4_dai = {
-	.symmetric_rates = 1,
-	.playback = {
-		.channels_min = 2,
-		.channels_max = 2,
-		.rates = S3C64XX_I2S_RATES,
-		.formats = S3C64XX_I2S_FMTS,
-	},
-	.capture = {
-		.channels_min = 2,
-		.channels_max = 2,
-		.rates = S3C64XX_I2S_RATES,
-		.formats = S3C64XX_I2S_FMTS,
-	},
-	.probe = s3c64xx_i2sv4_probe,
-	.ops = &s3c64xx_i2sv4_dai_ops,
-};
-
-static __devinit int s3c64xx_i2sv4_dev_probe(struct platform_device *pdev)
-{
-	struct s3c_audio_pdata *i2s_pdata;
-	struct s3c_i2sv2_info *i2s;
-	struct resource *res;
-	int ret;
-
-	i2s = &s3c64xx_i2sv4;
-
-	i2s->feature |= S3C_FEATURE_CDCLKCON;
-
-	i2s->dma_capture = &s3c64xx_i2sv4_pcm_stereo_in;
-	i2s->dma_playback = &s3c64xx_i2sv4_pcm_stereo_out;
-
-	res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "Unable to get I2S-TX dma resource\n");
-		return -ENXIO;
-	}
-	i2s->dma_playback->channel = res->start;
-
-	res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-	if (!res) {
-		dev_err(&pdev->dev, "Unable to get I2S-RX dma resource\n");
-		return -ENXIO;
-	}
-	i2s->dma_capture->channel = res->start;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "Unable to get I2S SFR address\n");
-		return -ENXIO;
-	}
-
-	if (!request_mem_region(res->start, resource_size(res),
-				"s3c64xx-i2s-v4")) {
-		dev_err(&pdev->dev, "Unable to request SFR region\n");
-		return -EBUSY;
-	}
-	i2s->dma_capture->dma_addr = res->start + S3C2412_IISRXD;
-	i2s->dma_playback->dma_addr = res->start + S3C2412_IISTXD;
-
-	i2s->dma_capture->client = &s3c64xx_dma_client_in;
-	i2s->dma_capture->dma_size = 4;
-	i2s->dma_playback->client = &s3c64xx_dma_client_out;
-	i2s->dma_playback->dma_size = 4;
-
-	i2s->base = res->start;
-
-	i2s_pdata = pdev->dev.platform_data;
-	if (i2s_pdata && i2s_pdata->cfg_gpio && i2s_pdata->cfg_gpio(pdev)) {
-		dev_err(&pdev->dev, "Unable to configure gpio\n");
-		return -EINVAL;
-	}
-
-	i2s->iis_cclk = clk_get(&pdev->dev, "audio-bus");
-	if (IS_ERR(i2s->iis_cclk)) {
-		dev_err(&pdev->dev, "failed to get audio-bus\n");
-		ret = PTR_ERR(i2s->iis_cclk);
-		goto err;
-	}
-
-	clk_enable(i2s->iis_cclk);
-
-	ret = s3c_i2sv2_register_dai(&pdev->dev, pdev->id, &s3c64xx_i2s_v4_dai);
-	if (ret != 0)
-		goto err_i2sv2;
-
-	return 0;
-
-err_i2sv2:
-	clk_put(i2s->iis_cclk);
-err:
-	return ret;
-}
-
-static __devexit int s3c64xx_i2sv4_dev_remove(struct platform_device *pdev)
-{
-	struct s3c_i2sv2_info *i2s = &s3c64xx_i2sv4;
-	struct resource *res;
-
-	snd_soc_unregister_dai(&pdev->dev);
-	clk_put(i2s->iis_cclk);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res)
-		release_mem_region(res->start, resource_size(res));
-	else
-		dev_warn(&pdev->dev, "Unable to get I2S SFR address\n");
-		
-	return 0;
-}
-
-static struct platform_driver s3c64xx_i2sv4_driver = {
-	.probe  = s3c64xx_i2sv4_dev_probe,
-	.remove = s3c64xx_i2sv4_dev_remove,
-	.driver = {
-		.name = "samsung-i2s-v4",
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init s3c64xx_i2sv4_init(void)
-{
-	return platform_driver_register(&s3c64xx_i2sv4_driver);
-}
-module_init(s3c64xx_i2sv4_init);
-
-static void __exit s3c64xx_i2sv4_exit(void)
-{
-	platform_driver_unregister(&s3c64xx_i2sv4_driver);
-}
-module_exit(s3c64xx_i2sv4_exit);
-
-/* Module information */
-MODULE_AUTHOR("Jaswinder Singh, <jassi.brar@samsung.com>");
-MODULE_DESCRIPTION("S3C64XX I2Sv4 SoC Interface");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:samsung-i2s-v4");
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c
deleted file mode 100644
index 0fefbb5..0000000
--- a/sound/soc/s3c24xx/s3c64xx-i2s.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/* sound/soc/s3c24xx/s3c64xx-i2s.c
- *
- * ALSA SoC Audio Layer - S3C64XX I2S driver
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <sound/soc.h>
-
-#include <plat/audio.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-
-#include "dma.h"
-#include "regs-i2s-v2.h"
-#include "s3c64xx-i2s.h"
-
-/* The value should be set to maximum of the total number
- * of I2Sv3 controllers that any supported SoC has.
- */
-#define MAX_I2SV3	2
-
-static struct s3c2410_dma_client s3c64xx_dma_client_out = {
-	.name		= "I2S PCM Stereo out"
-};
-
-static struct s3c2410_dma_client s3c64xx_dma_client_in = {
-	.name		= "I2S PCM Stereo in"
-};
-
-static struct s3c_dma_params s3c64xx_i2s_pcm_stereo_out[MAX_I2SV3];
-static struct s3c_dma_params s3c64xx_i2s_pcm_stereo_in[MAX_I2SV3];
-static struct s3c_i2sv2_info s3c64xx_i2s[MAX_I2SV3];
-
-struct clk *s3c64xx_i2s_get_clock(struct snd_soc_dai *dai)
-{
-	struct s3c_i2sv2_info *i2s = snd_soc_dai_get_drvdata(dai);
-	u32 iismod = readl(i2s->regs + S3C2412_IISMOD);
-
-	if (iismod & S3C2412_IISMOD_IMS_SYSMUX)
-		return i2s->iis_cclk;
-	else
-		return i2s->iis_pclk;
-}
-EXPORT_SYMBOL_GPL(s3c64xx_i2s_get_clock);
-
-static int s3c64xx_i2s_probe(struct snd_soc_dai *dai)
-{
-	struct s3c_i2sv2_info *i2s;
-	int ret;
-
-	if (dai->id >= MAX_I2SV3) {
-		dev_err(dai->dev, "id %d out of range\n", dai->id);
-		return -EINVAL;
-	}
-
-	i2s = &s3c64xx_i2s[dai->id];
-	snd_soc_dai_set_drvdata(dai, i2s);
-
-	i2s->iis_cclk = clk_get(dai->dev, "audio-bus");
-	if (IS_ERR(i2s->iis_cclk)) {
-		dev_err(dai->dev, "failed to get audio-bus\n");
-		ret = PTR_ERR(i2s->iis_cclk);
-		goto err;
-	}
-
-	clk_enable(i2s->iis_cclk);
-
-	ret = s3c_i2sv2_probe(dai, i2s, i2s->base);
-	if (ret)
-		goto err_clk;
-
-	return 0;
-
-err_clk:
-	clk_disable(i2s->iis_cclk);
-	clk_put(i2s->iis_cclk);
-err:
-	kfree(i2s);
-	return ret;
-}
-
-static int s3c64xx_i2s_remove(struct snd_soc_dai *dai)
-{
-	struct s3c_i2sv2_info *i2s = snd_soc_dai_get_drvdata(dai);
-
-	clk_disable(i2s->iis_cclk);
-	clk_put(i2s->iis_cclk);
-	kfree(i2s);
-	return 0;
-}
-
-static struct snd_soc_dai_ops s3c64xx_i2s_dai_ops;
-
-static struct snd_soc_dai_driver s3c64xx_i2s_dai[MAX_I2SV3] = {
-{
-	.name = "s3c64xx-i2s-0",
-	.probe = s3c64xx_i2s_probe,
-	.remove = s3c64xx_i2s_remove,
-	.playback = {
-		.channels_min = 2,
-		.channels_max = 2,
-		.rates = S3C64XX_I2S_RATES,
-		.formats = S3C64XX_I2S_FMTS,},
-	.capture = {
-		.channels_min = 2,
-		.channels_max = 2,
-		.rates = S3C64XX_I2S_RATES,
-		.formats = S3C64XX_I2S_FMTS,},
-	.ops = &s3c64xx_i2s_dai_ops,
-	.symmetric_rates = 1,
-}, {
-	.name = "s3c64xx-i2s-1",
-	.probe = s3c64xx_i2s_probe,
-	.remove = s3c64xx_i2s_remove,
-	.playback = {
-		.channels_min = 2,
-		.channels_max = 2,
-		.rates = S3C64XX_I2S_RATES,
-		.formats = S3C64XX_I2S_FMTS,},
-	.capture = {
-		.channels_min = 2,
-		.channels_max = 2,
-		.rates = S3C64XX_I2S_RATES,
-		.formats = S3C64XX_I2S_FMTS,},
-	.ops = &s3c64xx_i2s_dai_ops,
-	.symmetric_rates = 1,
-},};
-
-static __devinit int s3c64xx_iis_dev_probe(struct platform_device *pdev)
-{
-	struct s3c_audio_pdata *i2s_pdata;
-	struct s3c_i2sv2_info *i2s;
-	struct resource *res;
-	int i, ret;
-
-	if (pdev->id >= MAX_I2SV3) {
-		dev_err(&pdev->dev, "id %d out of range\n", pdev->id);
-		return -EINVAL;
-	}
-
-	i2s = &s3c64xx_i2s[pdev->id];
-
-	i2s->dma_capture = &s3c64xx_i2s_pcm_stereo_in[pdev->id];
-	i2s->dma_playback = &s3c64xx_i2s_pcm_stereo_out[pdev->id];
-
-	res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "Unable to get I2S-TX dma resource\n");
-		return -ENXIO;
-	}
-	i2s->dma_playback->channel = res->start;
-
-	res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-	if (!res) {
-		dev_err(&pdev->dev, "Unable to get I2S-RX dma resource\n");
-		return -ENXIO;
-	}
-	i2s->dma_capture->channel = res->start;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "Unable to get I2S SFR address\n");
-		return -ENXIO;
-	}
-
-	if (!request_mem_region(res->start, resource_size(res),
-				"s3c64xx-i2s")) {
-		dev_err(&pdev->dev, "Unable to request SFR region\n");
-		return -EBUSY;
-	}
-	i2s->base = res->start;
-
-	i2s_pdata = pdev->dev.platform_data;
-	if (i2s_pdata && i2s_pdata->cfg_gpio && i2s_pdata->cfg_gpio(pdev)) {
-		dev_err(&pdev->dev, "Unable to configure gpio\n");
-		return -EINVAL;
-	}
-	i2s->dma_capture->dma_addr = res->start + S3C2412_IISRXD;
-	i2s->dma_playback->dma_addr = res->start + S3C2412_IISTXD;
-
-	i2s->dma_capture->client = &s3c64xx_dma_client_in;
-	i2s->dma_capture->dma_size = 4;
-	i2s->dma_playback->client = &s3c64xx_dma_client_out;
-	i2s->dma_playback->dma_size = 4;
-
-	for (i = 0; i < ARRAY_SIZE(s3c64xx_i2s_dai); i++) {
-		ret = s3c_i2sv2_register_dai(&pdev->dev, i,
-						&s3c64xx_i2s_dai[i]);
-		if (ret != 0)
-			return ret;
-	}
-
-	return 0;
-}
-
-static __devexit int s3c64xx_iis_dev_remove(struct platform_device *pdev)
-{
-	snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(s3c64xx_i2s_dai));
-	return 0;
-}
-
-static struct platform_driver s3c64xx_iis_driver = {
-	.probe  = s3c64xx_iis_dev_probe,
-	.remove = s3c64xx_iis_dev_remove,
-	.driver = {
-		.name = "samsung-i2s",
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init s3c64xx_i2s_init(void)
-{
-	return platform_driver_register(&s3c64xx_iis_driver);
-}
-module_init(s3c64xx_i2s_init);
-
-static void __exit s3c64xx_i2s_exit(void)
-{
-	platform_driver_unregister(&s3c64xx_iis_driver);
-}
-module_exit(s3c64xx_i2s_exit);
-
-/* Module information */
-MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("S3C64XX I2S SoC Interface");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:samsung-i2s");
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.h b/sound/soc/s3c24xx/s3c64xx-i2s.h
deleted file mode 100644
index de4075d..0000000
--- a/sound/soc/s3c24xx/s3c64xx-i2s.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* sound/soc/s3c24xx/s3c64xx-i2s.h
- *
- * ALSA SoC Audio Layer - S3C64XX I2S driver
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __SND_SOC_S3C24XX_S3C64XX_I2S_H
-#define __SND_SOC_S3C24XX_S3C64XX_I2S_H __FILE__
-
-struct clk;
-
-#include "s3c-i2s-v2.h"
-
-#define S3C64XX_DIV_BCLK	S3C_I2SV2_DIV_BCLK
-#define S3C64XX_DIV_RCLK	S3C_I2SV2_DIV_RCLK
-#define S3C64XX_DIV_PRESCALER	S3C_I2SV2_DIV_PRESCALER
-
-#define S3C64XX_CLKSRC_PCLK	S3C_I2SV2_CLKSRC_PCLK
-#define S3C64XX_CLKSRC_MUX	S3C_I2SV2_CLKSRC_AUDIOBUS
-#define S3C64XX_CLKSRC_CDCLK    S3C_I2SV2_CLKSRC_CDCLK
-
-#define S3C64XX_I2S_RATES \
-	(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
-	SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
-	SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
-
-#define S3C64XX_I2S_FMTS \
-	(SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\
-	 SNDRV_PCM_FMTBIT_S24_LE)
-
-struct clk *s3c64xx_i2s_get_clock(struct snd_soc_dai *dai);
-
-#endif /* __SND_SOC_S3C24XX_S3C64XX_I2S_H */
-- 
1.6.2.5

[PATCH 22/25] ASoC: SMDK64XX: Rename for other platforms

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

We plan to use the same ASoC Machine driver for most of
latest SMDK platforms. So rename the 64XX specific driver
to generic named.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 sound/soc/s3c24xx/Kconfig           |    6 +-
 sound/soc/s3c24xx/Makefile          |    4 +-
 sound/soc/s3c24xx/smdk64xx_wm8580.c |  253 -----------------------------------
 sound/soc/s3c24xx/smdk_wm8580.c     |  253 +++++++++++++++++++++++++++++++++++
 4 files changed, 258 insertions(+), 258 deletions(-)
 delete mode 100644 sound/soc/s3c24xx/smdk64xx_wm8580.c
 create mode 100644 sound/soc/s3c24xx/smdk_wm8580.c

diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index 32f1877..95bdd0d 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -59,13 +59,13 @@ config SND_S3C24XX_SOC_JIVE_WM8750
 	help
 	  Sat Y if you want to add support for SoC audio on the Jive.
 
-config SND_S3C64XX_SOC_WM8580
-	tristate "SoC I2S Audio support for WM8580 on SMDK64XX"
+config SND_SOC_SMDK_WM8580
+	tristate "SoC I2S Audio support for WM8580 on SMDK"
 	depends on SND_S3C24XX_SOC && MACH_SMDK6410
 	select SND_SOC_WM8580
 	select SND_SAMSUNG_I2S
 	help
-	  Say Y if you want to add support for SoC audio on the SMDK6410.
+	  Say Y if you want to add support for SoC audio on the SMDKs.
 
 config SND_S3C24XX_SOC_SMDK2443_WM9710
 	tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile
index dac41ee..7eee57f 100644
--- a/sound/soc/s3c24xx/Makefile
+++ b/sound/soc/s3c24xx/Makefile
@@ -28,7 +28,7 @@ snd-soc-s3c24xx-simtec-objs := s3c24xx_simtec.o
 snd-soc-s3c24xx-simtec-hermes-objs := s3c24xx_simtec_hermes.o
 snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o
 snd-soc-rx1950-uda1380-objs := rx1950_uda1380.o
-snd-soc-smdk64xx-wm8580-objs := smdk64xx_wm8580.o
+snd-soc-smdk-wm8580-objs := smdk_wm8580.o
 snd-soc-smdk-wm9713-objs := smdk_wm9713.o
 snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o
 snd-soc-goni-wm8994-objs := goni_wm8994.o
@@ -44,7 +44,7 @@ obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC) += snd-soc-s3c24xx-simtec.o
 obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES) += snd-soc-s3c24xx-simtec-hermes.o
 obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv320aic23.o
 obj-$(CONFIG_SND_S3C24XX_SOC_RX1950_UDA1380) += snd-soc-rx1950-uda1380.o
-obj-$(CONFIG_SND_S3C64XX_SOC_WM8580) += snd-soc-smdk64xx-wm8580.o
+obj-$(CONFIG_SND_SOC_SMDK_WM8580) += snd-soc-smdk-wm8580.o
 obj-$(CONFIG_SND_SOC_SMDK_WM9713) += snd-soc-smdk-wm9713.o
 obj-$(CONFIG_SND_S3C64XX_SOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o
 obj-$(CONFIG_SND_SOC_SMDK_SPDIF) += snd-soc-smdk-spdif.o
diff --git a/sound/soc/s3c24xx/smdk64xx_wm8580.c b/sound/soc/s3c24xx/smdk64xx_wm8580.c
deleted file mode 100644
index 5f51db0..0000000
--- a/sound/soc/s3c24xx/smdk64xx_wm8580.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- *  smdk64xx_wm8580.c
- *
- *  Copyright (c) 2009 Samsung Electronics Co. Ltd
- *  Author: Jaswinder Singh <jassi.brar@samsung.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-#include <sound/soc-dapm.h>
-
-#include "../codecs/wm8580.h"
-#include "dma.h"
-#include "i2s.h"
-
-/*
- * Default CFG switch settings to use this driver:
- *
- *   SMDK6410: Set CFG1 1-3 Off, CFG2 1-4 On
- */
-
-/* SMDK64XX has a 12MHZ crystal attached to WM8580 */
-#define SMDK64XX_WM8580_FREQ 12000000
-
-static int smdk64xx_hw_params(struct snd_pcm_substream *substream,
-	struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	unsigned int pll_out;
-	int bfs, rfs, ret;
-
-	switch (params_format(params)) {
-	case SNDRV_PCM_FORMAT_U8:
-	case SNDRV_PCM_FORMAT_S8:
-		bfs = 16;
-		break;
-	case SNDRV_PCM_FORMAT_U16_LE:
-	case SNDRV_PCM_FORMAT_S16_LE:
-		bfs = 32;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/* The Fvco for WM8580 PLLs must fall within [90,100]MHz.
-	 * This criterion can't be met if we request PLL output
-	 * as {8000x256, 64000x256, 11025x256}Hz.
-	 * As a wayout, we rather change rfs to a minimum value that
-	 * results in (params_rate(params) * rfs), and itself, acceptable
-	 * to both - the CODEC and the CPU.
-	 */
-	switch (params_rate(params)) {
-	case 16000:
-	case 22050:
-	case 32000:
-	case 44100:
-	case 48000:
-	case 88200:
-	case 96000:
-		rfs = 256;
-		break;
-	case 64000:
-		rfs = 384;
-		break;
-	case 8000:
-	case 11025:
-		rfs = 512;
-		break;
-	default:
-		return -EINVAL;
-	}
-	pll_out = params_rate(params) * rfs;
-
-	/* Set the Codec DAI configuration */
-	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S
-					 | SND_SOC_DAIFMT_NB_NF
-					 | SND_SOC_DAIFMT_CBM_CFM);
-	if (ret < 0)
-		return ret;
-
-	/* Set the AP DAI configuration */
-	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S
-					 | SND_SOC_DAIFMT_NB_NF
-					 | SND_SOC_DAIFMT_CBM_CFM);
-	if (ret < 0)
-		return ret;
-
-	/* Set WM8580 to drive MCLK from its PLLA */
-	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK,
-					WM8580_CLKSRC_PLLA);
-	if (ret < 0)
-		return ret;
-
-	ret = snd_soc_dai_set_pll(codec_dai, WM8580_PLLA, 0,
-					SMDK64XX_WM8580_FREQ, pll_out);
-	if (ret < 0)
-		return ret;
-
-	ret = snd_soc_dai_set_sysclk(codec_dai, WM8580_CLKSRC_PLLA,
-				     pll_out, SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-/*
- * SMDK64XX WM8580 DAI operations.
- */
-static struct snd_soc_ops smdk64xx_ops = {
-	.hw_params = smdk64xx_hw_params,
-};
-
-/* SMDK64xx Playback widgets */
-static const struct snd_soc_dapm_widget wm8580_dapm_widgets_pbk[] = {
-	SND_SOC_DAPM_HP("Front", NULL),
-	SND_SOC_DAPM_HP("Center+Sub", NULL),
-	SND_SOC_DAPM_HP("Rear", NULL),
-};
-
-/* SMDK64xx Capture widgets */
-static const struct snd_soc_dapm_widget wm8580_dapm_widgets_cpt[] = {
-	SND_SOC_DAPM_MIC("MicIn", NULL),
-	SND_SOC_DAPM_LINE("LineIn", NULL),
-};
-
-/* SMDK-PAIFTX connections */
-static const struct snd_soc_dapm_route audio_map_tx[] = {
-	/* MicIn feeds AINL */
-	{"AINL", NULL, "MicIn"},
-
-	/* LineIn feeds AINL/R */
-	{"AINL", NULL, "LineIn"},
-	{"AINR", NULL, "LineIn"},
-};
-
-/* SMDK-PAIFRX connections */
-static const struct snd_soc_dapm_route audio_map_rx[] = {
-	/* Front Left/Right are fed VOUT1L/R */
-	{"Front", NULL, "VOUT1L"},
-	{"Front", NULL, "VOUT1R"},
-
-	/* Center/Sub are fed VOUT2L/R */
-	{"Center+Sub", NULL, "VOUT2L"},
-	{"Center+Sub", NULL, "VOUT2R"},
-
-	/* Rear Left/Right are fed VOUT3L/R */
-	{"Rear", NULL, "VOUT3L"},
-	{"Rear", NULL, "VOUT3R"},
-};
-
-static int smdk64xx_wm8580_init_paiftx(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_soc_codec *codec = rtd->codec;
-
-	/* Add smdk64xx specific Capture widgets */
-	snd_soc_dapm_new_controls(codec, wm8580_dapm_widgets_cpt,
-				  ARRAY_SIZE(wm8580_dapm_widgets_cpt));
-
-	/* Set up PAIFTX audio path */
-	snd_soc_dapm_add_routes(codec, audio_map_tx, ARRAY_SIZE(audio_map_tx));
-
-	/* Enabling the microphone requires the fitting of a 0R
-	 * resistor to connect the line from the microphone jack.
-	 */
-	snd_soc_dapm_disable_pin(codec, "MicIn");
-
-	/* signal a DAPM event */
-	snd_soc_dapm_sync(codec);
-
-	return 0;
-}
-
-static int smdk64xx_wm8580_init_paifrx(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_soc_codec *codec = rtd->codec;
-
-	/* Add smdk64xx specific Playback widgets */
-	snd_soc_dapm_new_controls(codec, wm8580_dapm_widgets_pbk,
-				  ARRAY_SIZE(wm8580_dapm_widgets_pbk));
-
-	/* Set up PAIFRX audio path */
-	snd_soc_dapm_add_routes(codec, audio_map_rx, ARRAY_SIZE(audio_map_rx));
-
-	/* signal a DAPM event */
-	snd_soc_dapm_sync(codec);
-
-	return 0;
-}
-
-static struct snd_soc_dai_link smdk64xx_dai[] = {
-{ /* Primary Playback i/f */
-	.name = "WM8580 PAIF RX",
-	.stream_name = "Playback",
-	.cpu_dai_name = "samsung-i2s.2",
-	.codec_dai_name = "wm8580-hifi-playback",
-	.platform_name = "samsung-audio",
-	.codec_name = "wm8580-codec.0-001b",
-	.init = smdk64xx_wm8580_init_paifrx,
-	.ops = &smdk64xx_ops,
-},
-{ /* Primary Capture i/f */
-	.name = "WM8580 PAIF TX",
-	.stream_name = "Capture",
-	.cpu_dai_name = "samsung-i2s.2",
-	.codec_dai_name = "wm8580-hifi-capture",
-	.platform_name = "samsung-audio",
-	.codec_name = "wm8580-codec.0-001b",
-	.init = smdk64xx_wm8580_init_paiftx,
-	.ops = &smdk64xx_ops,
-},
-};
-
-static struct snd_soc_card smdk64xx = {
-	.name = "SMDK64xx 5.1",
-	.dai_link = smdk64xx_dai,
-	.num_links = ARRAY_SIZE(smdk64xx_dai),
-};
-
-static struct platform_device *smdk64xx_snd_device;
-
-static int __init smdk64xx_audio_init(void)
-{
-	int ret;
-
-	smdk64xx_snd_device = platform_device_alloc("soc-audio", -1);
-	if (!smdk64xx_snd_device)
-		return -ENOMEM;
-
-	platform_set_drvdata(smdk64xx_snd_device, &smdk64xx);
-	ret = platform_device_add(smdk64xx_snd_device);
-
-	if (ret)
-		platform_device_put(smdk64xx_snd_device);
-
-	return ret;
-}
-module_init(smdk64xx_audio_init);
-
-MODULE_AUTHOR("Jaswinder Singh, jassi.brar@samsung.com");
-MODULE_DESCRIPTION("ALSA SoC SMDK64XX WM8580");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/smdk_wm8580.c b/sound/soc/s3c24xx/smdk_wm8580.c
new file mode 100644
index 0000000..bbd6c97
--- /dev/null
+++ b/sound/soc/s3c24xx/smdk_wm8580.c
@@ -0,0 +1,253 @@
+/*
+ *  smdk_wm8580.c
+ *
+ *  Copyright (c) 2009 Samsung Electronics Co. Ltd
+ *  Author: Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include "../codecs/wm8580.h"
+#include "dma.h"
+#include "i2s.h"
+
+/*
+ * Default CFG switch settings to use this driver:
+ *
+ *   SMDK6410: Set CFG1 1-3 Off, CFG2 1-4 On
+ */
+
+/* SMDK has a 12MHZ crystal attached to WM8580 */
+#define SMDK_WM8580_FREQ 12000000
+
+static int smdk_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	unsigned int pll_out;
+	int bfs, rfs, ret;
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_U8:
+	case SNDRV_PCM_FORMAT_S8:
+		bfs = 16;
+		break;
+	case SNDRV_PCM_FORMAT_U16_LE:
+	case SNDRV_PCM_FORMAT_S16_LE:
+		bfs = 32;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* The Fvco for WM8580 PLLs must fall within [90,100]MHz.
+	 * This criterion can't be met if we request PLL output
+	 * as {8000x256, 64000x256, 11025x256}Hz.
+	 * As a wayout, we rather change rfs to a minimum value that
+	 * results in (params_rate(params) * rfs), and itself, acceptable
+	 * to both - the CODEC and the CPU.
+	 */
+	switch (params_rate(params)) {
+	case 16000:
+	case 22050:
+	case 32000:
+	case 44100:
+	case 48000:
+	case 88200:
+	case 96000:
+		rfs = 256;
+		break;
+	case 64000:
+		rfs = 384;
+		break;
+	case 8000:
+	case 11025:
+		rfs = 512;
+		break;
+	default:
+		return -EINVAL;
+	}
+	pll_out = params_rate(params) * rfs;
+
+	/* Set the Codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S
+					 | SND_SOC_DAIFMT_NB_NF
+					 | SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* Set the AP DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S
+					 | SND_SOC_DAIFMT_NB_NF
+					 | SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* Set WM8580 to drive MCLK from its PLLA */
+	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK,
+					WM8580_CLKSRC_PLLA);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_pll(codec_dai, WM8580_PLLA, 0,
+					SMDK_WM8580_FREQ, pll_out);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8580_CLKSRC_PLLA,
+				     pll_out, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/*
+ * SMDK WM8580 DAI operations.
+ */
+static struct snd_soc_ops smdk_ops = {
+	.hw_params = smdk_hw_params,
+};
+
+/* SMDK Playback widgets */
+static const struct snd_soc_dapm_widget wm8580_dapm_widgets_pbk[] = {
+	SND_SOC_DAPM_HP("Front", NULL),
+	SND_SOC_DAPM_HP("Center+Sub", NULL),
+	SND_SOC_DAPM_HP("Rear", NULL),
+};
+
+/* SMDK Capture widgets */
+static const struct snd_soc_dapm_widget wm8580_dapm_widgets_cpt[] = {
+	SND_SOC_DAPM_MIC("MicIn", NULL),
+	SND_SOC_DAPM_LINE("LineIn", NULL),
+};
+
+/* SMDK-PAIFTX connections */
+static const struct snd_soc_dapm_route audio_map_tx[] = {
+	/* MicIn feeds AINL */
+	{"AINL", NULL, "MicIn"},
+
+	/* LineIn feeds AINL/R */
+	{"AINL", NULL, "LineIn"},
+	{"AINR", NULL, "LineIn"},
+};
+
+/* SMDK-PAIFRX connections */
+static const struct snd_soc_dapm_route audio_map_rx[] = {
+	/* Front Left/Right are fed VOUT1L/R */
+	{"Front", NULL, "VOUT1L"},
+	{"Front", NULL, "VOUT1R"},
+
+	/* Center/Sub are fed VOUT2L/R */
+	{"Center+Sub", NULL, "VOUT2L"},
+	{"Center+Sub", NULL, "VOUT2R"},
+
+	/* Rear Left/Right are fed VOUT3L/R */
+	{"Rear", NULL, "VOUT3L"},
+	{"Rear", NULL, "VOUT3R"},
+};
+
+static int smdk_wm8580_init_paiftx(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+
+	/* Add smdk specific Capture widgets */
+	snd_soc_dapm_new_controls(codec, wm8580_dapm_widgets_cpt,
+				  ARRAY_SIZE(wm8580_dapm_widgets_cpt));
+
+	/* Set up PAIFTX audio path */
+	snd_soc_dapm_add_routes(codec, audio_map_tx, ARRAY_SIZE(audio_map_tx));
+
+	/* Enabling the microphone requires the fitting of a 0R
+	 * resistor to connect the line from the microphone jack.
+	 */
+	snd_soc_dapm_disable_pin(codec, "MicIn");
+
+	/* signal a DAPM event */
+	snd_soc_dapm_sync(codec);
+
+	return 0;
+}
+
+static int smdk_wm8580_init_paifrx(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+
+	/* Add smdk specific Playback widgets */
+	snd_soc_dapm_new_controls(codec, wm8580_dapm_widgets_pbk,
+				  ARRAY_SIZE(wm8580_dapm_widgets_pbk));
+
+	/* Set up PAIFRX audio path */
+	snd_soc_dapm_add_routes(codec, audio_map_rx, ARRAY_SIZE(audio_map_rx));
+
+	/* signal a DAPM event */
+	snd_soc_dapm_sync(codec);
+
+	return 0;
+}
+
+static struct snd_soc_dai_link smdk_dai[] = {
+{ /* Primary Playback i/f */
+	.name = "WM8580 PAIF RX",
+	.stream_name = "Playback",
+	.cpu_dai_name = "samsung-i2s.2",
+	.codec_dai_name = "wm8580-hifi-playback",
+	.platform_name = "samsung-audio",
+	.codec_name = "wm8580-codec.0-001b",
+	.init = smdk_wm8580_init_paifrx,
+	.ops = &smdk_ops,
+},
+{ /* Primary Capture i/f */
+	.name = "WM8580 PAIF TX",
+	.stream_name = "Capture",
+	.cpu_dai_name = "samsung-i2s.2",
+	.codec_dai_name = "wm8580-hifi-capture",
+	.platform_name = "samsung-audio",
+	.codec_name = "wm8580-codec.0-001b",
+	.init = smdk_wm8580_init_paiftx,
+	.ops = &smdk_ops,
+},
+};
+
+static struct snd_soc_card smdk = {
+	.name = "SMDK-I2S",
+	.dai_link = smdk_dai,
+	.num_links = ARRAY_SIZE(smdk_dai),
+};
+
+static struct platform_device *smdk_snd_device;
+
+static int __init smdk_audio_init(void)
+{
+	int ret;
+
+	smdk_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!smdk_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(smdk_snd_device, &smdk);
+	ret = platform_device_add(smdk_snd_device);
+
+	if (ret)
+		platform_device_put(smdk_snd_device);
+
+	return ret;
+}
+module_init(smdk_audio_init);
+
+MODULE_AUTHOR("Jaswinder Singh, jassi.brar@samsung.com");
+MODULE_DESCRIPTION("ALSA SoC SMDK WM8580");
+MODULE_LICENSE("GPL");
-- 
1.6.2.5

[PATCH 23/25] ASoC: SMDK_WM8580: Enable for SMDKC100

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Enable the ASoC Machine driver to run on SMDKC100 as well.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 arch/arm/mach-s5pc100/mach-smdkc100.c |    2 +
 sound/soc/s3c24xx/Kconfig             |    2 +-
 sound/soc/s3c24xx/smdk_wm8580.c       |   73 +++++++++++++++++++++++---------
 3 files changed, 55 insertions(+), 22 deletions(-)

diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 020c3f9..8e35bfa 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -95,6 +95,7 @@ static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
 
 /* I2C0 */
 static struct i2c_board_info i2c_devs0[] __initdata = {
+	{I2C_BOARD_INFO("wm8580", 0x1b),},
 };
 
 /* I2C1 */
@@ -189,6 +190,7 @@ static struct platform_device *smdkc100_devices[] __initdata = {
 	&s3c_device_ts,
 	&s3c_device_wdt,
 	&smdkc100_lcd_powerdev,
+	&samsung_asoc_dma,
 	&s5pc100_device_iis0,
 	&samsung_device_keypad,
 	&s5pc100_device_ac97,
diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index 95bdd0d..4fabd62 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -61,7 +61,7 @@ config SND_S3C24XX_SOC_JIVE_WM8750
 
 config SND_SOC_SMDK_WM8580
 	tristate "SoC I2S Audio support for WM8580 on SMDK"
-	depends on SND_S3C24XX_SOC && MACH_SMDK6410
+	depends on SND_S3C24XX_SOC && (MACH_SMDK6410 || MACH_SMDKC100)
 	select SND_SOC_WM8580
 	select SND_SAMSUNG_I2S
 	help
diff --git a/sound/soc/s3c24xx/smdk_wm8580.c b/sound/soc/s3c24xx/smdk_wm8580.c
index bbd6c97..46ab884 100644
--- a/sound/soc/s3c24xx/smdk_wm8580.c
+++ b/sound/soc/s3c24xx/smdk_wm8580.c
@@ -18,6 +18,8 @@
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 
+#include <asm/mach-types.h>
+
 #include "../codecs/wm8580.h"
 #include "dma.h"
 #include "i2s.h"
@@ -199,33 +201,49 @@ static int smdk_wm8580_init_paifrx(struct snd_soc_pcm_runtime *rtd)
 	return 0;
 }
 
+enum {
+	PRI_PLAYBACK = 0,
+	PRI_CAPTURE,
+	SEC_PLAYBACK,
+};
+
 static struct snd_soc_dai_link smdk_dai[] = {
-{ /* Primary Playback i/f */
-	.name = "WM8580 PAIF RX",
-	.stream_name = "Playback",
-	.cpu_dai_name = "samsung-i2s.2",
-	.codec_dai_name = "wm8580-hifi-playback",
-	.platform_name = "samsung-audio",
-	.codec_name = "wm8580-codec.0-001b",
-	.init = smdk_wm8580_init_paifrx,
-	.ops = &smdk_ops,
-},
-{ /* Primary Capture i/f */
-	.name = "WM8580 PAIF TX",
-	.stream_name = "Capture",
-	.cpu_dai_name = "samsung-i2s.2",
-	.codec_dai_name = "wm8580-hifi-capture",
-	.platform_name = "samsung-audio",
-	.codec_name = "wm8580-codec.0-001b",
-	.init = smdk_wm8580_init_paiftx,
-	.ops = &smdk_ops,
-},
+	[PRI_PLAYBACK] = { /* Primary Playback i/f */
+		.name = "WM8580 PAIF RX",
+		.stream_name = "Playback",
+		.cpu_dai_name = "samsung-i2s.2",
+		.codec_dai_name = "wm8580-hifi-playback",
+		.platform_name = "samsung-audio",
+		.codec_name = "wm8580-codec.0-001b",
+		.init = smdk_wm8580_init_paifrx,
+		.ops = &smdk_ops,
+	},
+	[PRI_CAPTURE] = { /* Primary Capture i/f */
+		.name = "WM8580 PAIF TX",
+		.stream_name = "Capture",
+		.cpu_dai_name = "samsung-i2s.2",
+		.codec_dai_name = "wm8580-hifi-capture",
+		.platform_name = "samsung-audio",
+		.codec_name = "wm8580-codec.0-001b",
+		.init = smdk_wm8580_init_paiftx,
+		.ops = &smdk_ops,
+	},
+	[SEC_PLAYBACK] = { /* Sec_Fifo Playback i/f */
+		.name = "Sec_FIFO TX",
+		.stream_name = "Playback",
+		.cpu_dai_name = "samsung-i2s.x",
+		.codec_dai_name = "wm8580-hifi-playback",
+		.platform_name = "samsung-audio",
+		.codec_name = "wm8580-codec.0-001b",
+		.init = smdk_wm8580_init_paifrx,
+		.ops = &smdk_ops,
+	},
 };
 
 static struct snd_soc_card smdk = {
 	.name = "SMDK-I2S",
 	.dai_link = smdk_dai,
-	.num_links = ARRAY_SIZE(smdk_dai),
+	.num_links = 2,
 };
 
 static struct platform_device *smdk_snd_device;
@@ -233,6 +251,19 @@ static struct platform_device *smdk_snd_device;
 static int __init smdk_audio_init(void)
 {
 	int ret;
+	char *str;
+
+	if (machine_is_smdkc100()) {
+		smdk.num_links = 3;
+		/* S5PC100 has I2S0 as v5 */
+		str = (char *)smdk_dai[PRI_PLAYBACK].cpu_dai_name;
+		str[strlen(str) - 1] = '0';
+		str = (char *)smdk_dai[PRI_CAPTURE].cpu_dai_name;
+		str[strlen(str) - 1] = '0';
+		/* Secondary is at offset MAX_I2S from Primary */
+		str = (char *)smdk_dai[SEC_PLAYBACK].cpu_dai_name;
+		str[strlen(str) - 1] = '0' + MAX_I2S;
+	}
 
 	smdk_snd_device = platform_device_alloc("soc-audio", -1);
 	if (!smdk_snd_device)
-- 
1.6.2.5

[PATCH 24/25] ASoC: Samsung: Generalize Kconfig symbols

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Move prefixes to repesent the nature of Samsung ASoC suitably.
	SND_S3C24XX_SOC -> ASOC_SAMSUNG
	SND_S3C_SOC_PCM -> SND_SAMSUNG_PCM
	SND_S3C_SOC_AC97 -> SND_SAMSUNG_AC97
	SND_S5P_SOC_SPDIF -> SND_SAMSUNG_SPDIF
	SND_S3C24XX_SOC_I2S -> SND_S3C24XX_I2S
	SND_S3C64XX_SOC_SMARTQ -> ASOC_SMARTQ
	SND_SOC_SMDK_SPDIF -> ASOC_SAMSUNG_SMDK_SPDIF
	SND_SOC_SMDK_WM8580 -> ASOC_SAMSUNG_SMDK_WM8580
	SND_SOC_SMDK_WM9713 -> ASOC_SAMSUNG_SMDK_WM9713
	SND_SOC_GONI_AQUILA_WM8994 -> ASOC_GONI_AQUILA_WM8994

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 sound/soc/s3c24xx/Kconfig  |   96 ++++++++++++++++++++++----------------------
 sound/soc/s3c24xx/Makefile |   40 +++++++++---------
 2 files changed, 68 insertions(+), 68 deletions(-)

diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index 4fabd62..140095e 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -1,13 +1,13 @@
-config SND_S3C24XX_SOC
-	tristate "SoC Audio for the Samsung S3CXXXX chips"
+config ASOC_SAMSUNG
+	tristate "ASoC support for Samsung"
 	depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210
 	select S3C64XX_DMA if ARCH_S3C64XX
 	help
 	  Say Y or M if you want to add support for codecs attached to
-	  the S3C24XX AC97 or I2S interfaces. You will also need to
+	  the Samsung SoCs' Audio interfaces. You will also need to
 	  select the audio interfaces to support below.
 
-config SND_S3C24XX_SOC_I2S
+config SND_S3C24XX_I2S
 	tristate
 	select S3C2410_DMA
 
@@ -19,136 +19,136 @@ config SND_S3C2412_SOC_I2S
 	select SND_S3C_I2SV2_SOC
 	select S3C2410_DMA
 
-config SND_S3C_SOC_PCM
+config SND_SAMSUNG_PCM
 	tristate
 
-config SND_S3C_SOC_AC97
+config SND_SAMSUNG_AC97
 	tristate
 	select SND_SOC_AC97_BUS
 
-config SND_S5P_SOC_SPDIF
+config SND_SAMSUNG_SPDIF
 	tristate
 	select SND_SOC_SPDIF
 
 config SND_SAMSUNG_I2S
 	tristate
 
-config SND_S3C24XX_SOC_NEO1973_WM8753
+config ASOC_SAMSUNG_NEO1973_WM8753
 	tristate "SoC I2S Audio support for NEO1973 - WM8753"
-	depends on SND_S3C24XX_SOC && MACH_NEO1973_GTA01
-	select SND_S3C24XX_SOC_I2S
+	depends on ASOC_SAMSUNG && MACH_NEO1973_GTA01
+	select SND_S3C24XX_I2S
 	select SND_SOC_WM8753
 	help
 	  Say Y if you want to add support for SoC audio on smdk2440
 	  with the WM8753.
 
-config SND_S3C24XX_SOC_NEO1973_GTA02_WM8753
+config ASOC_SAMSUNG_NEO1973_GTA02_WM8753
 	tristate "Audio support for the Openmoko Neo FreeRunner (GTA02)"
-	depends on SND_S3C24XX_SOC && MACH_NEO1973_GTA02
-	select SND_S3C24XX_SOC_I2S
+	depends on ASOC_SAMSUNG && MACH_NEO1973_GTA02
+	select SND_S3C24XX_I2S
 	select SND_SOC_WM8753
 	help
 	  This driver provides audio support for the Openmoko Neo FreeRunner
 	  smartphone.
 	  
-config SND_S3C24XX_SOC_JIVE_WM8750
+config ASOC_SAMSUNG_JIVE_WM8750
 	tristate "SoC I2S Audio support for Jive"
-	depends on SND_S3C24XX_SOC && MACH_JIVE
+	depends on ASOC_SAMSUNG && MACH_JIVE
 	select SND_SOC_WM8750
 	select SND_S3C2412_SOC_I2S
 	help
 	  Sat Y if you want to add support for SoC audio on the Jive.
 
-config SND_SOC_SMDK_WM8580
+config ASOC_SAMSUNG_SMDK_WM8580
 	tristate "SoC I2S Audio support for WM8580 on SMDK"
-	depends on SND_S3C24XX_SOC && (MACH_SMDK6410 || MACH_SMDKC100)
+	depends on ASOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100)
 	select SND_SOC_WM8580
 	select SND_SAMSUNG_I2S
 	help
 	  Say Y if you want to add support for SoC audio on the SMDKs.
 
-config SND_S3C24XX_SOC_SMDK2443_WM9710
+config ASOC_SAMSUNG_SMDK2443_WM9710
 	tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
-	depends on SND_S3C24XX_SOC && MACH_SMDK2443
+	depends on ASOC_SAMSUNG && MACH_SMDK2443
 	select S3C2410_DMA
 	select AC97_BUS
 	select SND_SOC_AC97_CODEC
-	select SND_S3C_SOC_AC97
+	select SND_SAMSUNG_AC97
 	help
 	  Say Y if you want to add support for SoC audio on smdk2443
 	  with the WM9710.
 
-config SND_S3C24XX_SOC_LN2440SBC_ALC650
+config ASOC_SAMSUNG_LN2440SBC_ALC650
 	tristate "SoC AC97 Audio support for LN2440SBC - ALC650"
-	depends on SND_S3C24XX_SOC && ARCH_S3C2410
+	depends on ASOC_SAMSUNG && ARCH_S3C2410
 	select S3C2410_DMA
 	select AC97_BUS
 	select SND_SOC_AC97_CODEC
-	select SND_S3C_SOC_AC97
+	select SND_SAMSUNG_AC97
 	help
 	  Say Y if you want to add support for SoC audio on ln2440sbc
 	  with the ALC650.
 
-config SND_S3C24XX_SOC_S3C24XX_UDA134X
+config ASOC_SAMSUNG_S3C24XX_UDA134X
 	tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
-       	depends on SND_S3C24XX_SOC && ARCH_S3C2410
-       	select SND_S3C24XX_SOC_I2S
+	depends on ASOC_SAMSUNG && ARCH_S3C2410
+	select SND_S3C24XX_I2S
 	select SND_SOC_L3
-       	select SND_SOC_UDA134X
+	select SND_SOC_UDA134X
 
-config SND_S3C24XX_SOC_SIMTEC
+config ASOC_SAMSUNG_SIMTEC
 	tristate
 	help
 	  Internal node for common S3C24XX/Simtec suppor
 
-config SND_S3C24XX_SOC_SIMTEC_TLV320AIC23
+config ASOC_SAMSUNG_SIMTEC_TLV320AIC23
 	tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
-	depends on SND_S3C24XX_SOC && ARCH_S3C2410
-	select SND_S3C24XX_SOC_I2S
+	depends on ASOC_SAMSUNG && ARCH_S3C2410
+	select SND_S3C24XX_I2S
 	select SND_SOC_TLV320AIC23
-	select SND_S3C24XX_SOC_SIMTEC
+	select ASOC_SAMSUNG_SIMTEC
 
-config SND_S3C24XX_SOC_SIMTEC_HERMES
+config ASOC_SAMSUNG_SIMTEC_HERMES
 	tristate "SoC I2S Audio support for Simtec Hermes board"
-	depends on SND_S3C24XX_SOC && ARCH_S3C2410
-	select SND_S3C24XX_SOC_I2S
+	depends on ASOC_SAMSUNG && ARCH_S3C2410
+	select SND_S3C24XX_I2S
 	select SND_SOC_TLV320AIC3X
-	select SND_S3C24XX_SOC_SIMTEC
+	select ASOC_SAMSUNG_SIMTEC
 
-config SND_S3C24XX_SOC_RX1950_UDA1380
+config ASOC_SAMSUNG_RX1950_UDA1380
 	tristate "Audio support for the HP iPAQ RX1950"
-	depends on SND_S3C24XX_SOC && MACH_RX1950
-	select SND_S3C24XX_SOC_I2S
+	depends on ASOC_SAMSUNG && MACH_RX1950
+	select SND_S3C24XX_I2S
 	select SND_SOC_UDA1380
 	help
 	  This driver provides audio support for HP iPAQ RX1950 PDA.
 
-config SND_SOC_SMDK_WM9713
+config ASOC_SAMSUNG_SMDK_WM9713
 	tristate "SoC AC97 Audio support for SMDK with WM9713"
-	depends on SND_S3C24XX_SOC && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110)
+	depends on ASOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110)
 	select SND_SOC_WM9713
-	select SND_S3C_SOC_AC97
+	select SND_SAMSUNG_AC97
 	help
 	  Sat Y if you want to add support for SoC audio on the SMDK.
 
-config SND_S3C64XX_SOC_SMARTQ
+config ASOC_SMARTQ
 	tristate "SoC I2S Audio support for SmartQ board"
-	depends on SND_S3C24XX_SOC && MACH_SMARTQ
+	depends on ASOC_SAMSUNG && MACH_SMARTQ
 	select SND_SAMSUNG_I2S
 	select SND_SOC_WM8750
 
-config SND_SOC_GONI_AQUILA_WM8994
+config ASOC_GONI_AQUILA_WM8994
 	tristate "SoC I2S Audio support for AQUILA/GONI - WM8994"
-	depends on SND_S3C24XX_SOC && (MACH_GONI || MACH_AQUILA)
+	depends on ASOC_SAMSUNG && (MACH_GONI || MACH_AQUILA)
 	select SND_SAMSUNG_I2S
 	select SND_SOC_WM8994
 	help
 	  Say Y if you want to add support for SoC audio on goni or aquila
 	  with the WM8994.
 
-config SND_SOC_SMDK_SPDIF
+config ASOC_SAMSUNG_SMDK_SPDIF
 	tristate "SoC S/PDIF Audio support for SMDK"
 	depends on SND_S3C24XX_SOC && (MACH_SMDKC100 || MACH_SMDKC110 || MACH_SMDKV210)
-	select SND_S5P_SOC_SPDIF
+	select SND_SAMSUNG_SPDIF
 	help
 	  Say Y if you want to add support for SoC S/PDIF audio on the SMDK.
diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile
index 7eee57f..0d24f95 100644
--- a/sound/soc/s3c24xx/Makefile
+++ b/sound/soc/s3c24xx/Makefile
@@ -8,13 +8,13 @@ snd-soc-samsung-spdif-objs := spdif.o
 snd-soc-pcm-objs := pcm.o
 snd-soc-i2s-objs := i2s.o
 
-obj-$(CONFIG_SND_S3C24XX_SOC) += snd-soc-s3c24xx.o
-obj-$(CONFIG_SND_S3C24XX_SOC_I2S) += snd-soc-s3c24xx-i2s.o
-obj-$(CONFIG_SND_S3C_SOC_AC97) += snd-soc-ac97.o
+obj-$(CONFIG_ASOC_SAMSUNG) += snd-soc-s3c24xx.o
+obj-$(CONFIG_SND_S3C24XX_I2S) += snd-soc-s3c24xx-i2s.o
+obj-$(CONFIG_SND_SAMSUNG_AC97) += snd-soc-ac97.o
 obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o
 obj-$(CONFIG_SND_S3C_I2SV2_SOC) += snd-soc-s3c-i2s-v2.o
-obj-$(CONFIG_SND_S5P_SOC_SPDIF) += snd-soc-samsung-spdif.o
-obj-$(CONFIG_SND_S3C_SOC_PCM) += snd-soc-pcm.o
+obj-$(CONFIG_SND_SAMSUNG_SPDIF) += snd-soc-samsung-spdif.o
+obj-$(CONFIG_SND_SAMSUNG_PCM) += snd-soc-pcm.o
 obj-$(CONFIG_SND_SAMSUNG_I2S) += snd-soc-i2s.o
 
 # S3C24XX Machine Support
@@ -34,18 +34,18 @@ snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o
 snd-soc-goni-wm8994-objs := goni_wm8994.o
 snd-soc-smdk-spdif-objs := smdk_spdif.o
 
-obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o
-obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
-obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753) += snd-soc-neo1973-gta02-wm8753.o
-obj-$(CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o
-obj-$(CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o
-obj-$(CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
-obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC) += snd-soc-s3c24xx-simtec.o
-obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES) += snd-soc-s3c24xx-simtec-hermes.o
-obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv320aic23.o
-obj-$(CONFIG_SND_S3C24XX_SOC_RX1950_UDA1380) += snd-soc-rx1950-uda1380.o
-obj-$(CONFIG_SND_SOC_SMDK_WM8580) += snd-soc-smdk-wm8580.o
-obj-$(CONFIG_SND_SOC_SMDK_WM9713) += snd-soc-smdk-wm9713.o
-obj-$(CONFIG_SND_S3C64XX_SOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o
-obj-$(CONFIG_SND_SOC_SMDK_SPDIF) += snd-soc-smdk-spdif.o
-obj-$(CONFIG_SND_SOC_GONI_AQUILA_WM8994) += snd-soc-goni-wm8994.o
+obj-$(CONFIG_ASOC_SAMSUNG_JIVE_WM8750) += snd-soc-jive-wm8750.o
+obj-$(CONFIG_ASOC_SAMSUNG_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
+obj-$(CONFIG_ASOC_SAMSUNG_NEO1973_GTA02_WM8753) += snd-soc-neo1973-gta02-wm8753.o
+obj-$(CONFIG_ASOC_SAMSUNG_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o
+obj-$(CONFIG_ASOC_SAMSUNG_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o
+obj-$(CONFIG_ASOC_SAMSUNG_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
+obj-$(CONFIG_ASOC_SAMSUNG_SIMTEC) += snd-soc-s3c24xx-simtec.o
+obj-$(CONFIG_ASOC_SAMSUNG_SIMTEC_HERMES) += snd-soc-s3c24xx-simtec-hermes.o
+obj-$(CONFIG_ASOC_SAMSUNG_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv320aic23.o
+obj-$(CONFIG_ASOC_SAMSUNG_RX1950_UDA1380) += snd-soc-rx1950-uda1380.o
+obj-$(CONFIG_ASOC_SAMSUNG_SMDK_WM8580) += snd-soc-smdk-wm8580.o
+obj-$(CONFIG_ASOC_SAMSUNG_SMDK_WM9713) += snd-soc-smdk-wm9713.o
+obj-$(CONFIG_ASOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o
+obj-$(CONFIG_ASOC_SAMSUNG_SMDK_SPDIF) += snd-soc-smdk-spdif.o
+obj-$(CONFIG_ASOC_GONI_AQUILA_WM8994) += snd-soc-goni-wm8994.o
-- 
1.6.2.5

[PATCH 25/25] ASoC: Samsung: Rename from s3c24xx to samsung

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Finally, move the 's3c24xx' directory to 'samsung'

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 sound/soc/Kconfig                              |    2 +-
 sound/soc/Makefile                             |    2 +-
 sound/soc/s3c24xx/Kconfig                      |  154 ---
 sound/soc/s3c24xx/Makefile                     |   51 -
 sound/soc/s3c24xx/ac97.c                       |  520 ----------
 sound/soc/s3c24xx/ac97.h                       |   21 -
 sound/soc/s3c24xx/dma.c                        |  503 ----------
 sound/soc/s3c24xx/dma.h                        |   30 -
 sound/soc/s3c24xx/goni_wm8994.c                |  309 ------
 sound/soc/s3c24xx/i2s.c                        | 1251 ------------------------
 sound/soc/s3c24xx/i2s.h                        |   29 -
 sound/soc/s3c24xx/jive_wm8750.c                |  191 ----
 sound/soc/s3c24xx/lm4857.h                     |   32 -
 sound/soc/s3c24xx/ln2440sbc_alc650.c           |   78 --
 sound/soc/s3c24xx/neo1973_gta02_wm8753.c       |  504 ----------
 sound/soc/s3c24xx/neo1973_wm8753.c             |  704 -------------
 sound/soc/s3c24xx/pcm.c                        |  552 -----------
 sound/soc/s3c24xx/pcm.h                        |  124 ---
 sound/soc/s3c24xx/regs-i2s-v2.h                |  115 ---
 sound/soc/s3c24xx/rx1950_uda1380.c             |  333 -------
 sound/soc/s3c24xx/s3c-i2s-v2.c                 |  757 --------------
 sound/soc/s3c24xx/s3c-i2s-v2.h                 |  106 --
 sound/soc/s3c24xx/s3c2412-i2s.c                |  212 ----
 sound/soc/s3c24xx/s3c2412-i2s.h                |   27 -
 sound/soc/s3c24xx/s3c24xx-i2s.c                |  519 ----------
 sound/soc/s3c24xx/s3c24xx-i2s.h                |   35 -
 sound/soc/s3c24xx/s3c24xx_simtec.c             |  395 --------
 sound/soc/s3c24xx/s3c24xx_simtec.h             |   22 -
 sound/soc/s3c24xx/s3c24xx_simtec_hermes.c      |  146 ---
 sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c |  134 ---
 sound/soc/s3c24xx/s3c24xx_uda134x.c            |  368 -------
 sound/soc/s3c24xx/smartq_wm8987.c              |  287 ------
 sound/soc/s3c24xx/smdk2443_wm9710.c            |   74 --
 sound/soc/s3c24xx/smdk_spdif.c                 |  223 -----
 sound/soc/s3c24xx/smdk_wm8580.c                |  284 ------
 sound/soc/s3c24xx/smdk_wm9713.c                |  107 --
 sound/soc/s3c24xx/spdif.c                      |  501 ----------
 sound/soc/s3c24xx/spdif.h                      |   19 -
 sound/soc/samsung/Kconfig                      |  154 +++
 sound/soc/samsung/Makefile                     |   51 +
 sound/soc/samsung/ac97.c                       |  520 ++++++++++
 sound/soc/samsung/ac97.h                       |   21 +
 sound/soc/samsung/dma.c                        |  503 ++++++++++
 sound/soc/samsung/dma.h                        |   30 +
 sound/soc/samsung/goni_wm8994.c                |  309 ++++++
 sound/soc/samsung/i2s.c                        | 1251 ++++++++++++++++++++++++
 sound/soc/samsung/i2s.h                        |   29 +
 sound/soc/samsung/jive_wm8750.c                |  191 ++++
 sound/soc/samsung/lm4857.h                     |   32 +
 sound/soc/samsung/ln2440sbc_alc650.c           |   78 ++
 sound/soc/samsung/neo1973_gta02_wm8753.c       |  504 ++++++++++
 sound/soc/samsung/neo1973_wm8753.c             |  704 +++++++++++++
 sound/soc/samsung/pcm.c                        |  552 +++++++++++
 sound/soc/samsung/pcm.h                        |  124 +++
 sound/soc/samsung/regs-i2s-v2.h                |  115 +++
 sound/soc/samsung/rx1950_uda1380.c             |  333 +++++++
 sound/soc/samsung/s3c-i2s-v2.c                 |  757 ++++++++++++++
 sound/soc/samsung/s3c-i2s-v2.h                 |  106 ++
 sound/soc/samsung/s3c2412-i2s.c                |  212 ++++
 sound/soc/samsung/s3c2412-i2s.h                |   27 +
 sound/soc/samsung/s3c24xx-i2s.c                |  519 ++++++++++
 sound/soc/samsung/s3c24xx-i2s.h                |   35 +
 sound/soc/samsung/s3c24xx_simtec.c             |  395 ++++++++
 sound/soc/samsung/s3c24xx_simtec.h             |   22 +
 sound/soc/samsung/s3c24xx_simtec_hermes.c      |  146 +++
 sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c |  134 +++
 sound/soc/samsung/s3c24xx_uda134x.c            |  368 +++++++
 sound/soc/samsung/smartq_wm8987.c              |  287 ++++++
 sound/soc/samsung/smdk2443_wm9710.c            |   74 ++
 sound/soc/samsung/smdk_spdif.c                 |  223 +++++
 sound/soc/samsung/smdk_wm8580.c                |  284 ++++++
 sound/soc/samsung/smdk_wm9713.c                |  107 ++
 sound/soc/samsung/spdif.c                      |  501 ++++++++++
 sound/soc/samsung/spdif.h                      |   19 +
 74 files changed, 9719 insertions(+), 9719 deletions(-)
 delete mode 100644 sound/soc/s3c24xx/Kconfig
 delete mode 100644 sound/soc/s3c24xx/Makefile
 delete mode 100644 sound/soc/s3c24xx/ac97.c
 delete mode 100644 sound/soc/s3c24xx/ac97.h
 delete mode 100644 sound/soc/s3c24xx/dma.c
 delete mode 100644 sound/soc/s3c24xx/dma.h
 delete mode 100644 sound/soc/s3c24xx/goni_wm8994.c
 delete mode 100644 sound/soc/s3c24xx/i2s.c
 delete mode 100644 sound/soc/s3c24xx/i2s.h
 delete mode 100644 sound/soc/s3c24xx/jive_wm8750.c
 delete mode 100644 sound/soc/s3c24xx/lm4857.h
 delete mode 100644 sound/soc/s3c24xx/ln2440sbc_alc650.c
 delete mode 100644 sound/soc/s3c24xx/neo1973_gta02_wm8753.c
 delete mode 100644 sound/soc/s3c24xx/neo1973_wm8753.c
 delete mode 100644 sound/soc/s3c24xx/pcm.c
 delete mode 100644 sound/soc/s3c24xx/pcm.h
 delete mode 100644 sound/soc/s3c24xx/regs-i2s-v2.h
 delete mode 100644 sound/soc/s3c24xx/rx1950_uda1380.c
 delete mode 100644 sound/soc/s3c24xx/s3c-i2s-v2.c
 delete mode 100644 sound/soc/s3c24xx/s3c-i2s-v2.h
 delete mode 100644 sound/soc/s3c24xx/s3c2412-i2s.c
 delete mode 100644 sound/soc/s3c24xx/s3c2412-i2s.h
 delete mode 100644 sound/soc/s3c24xx/s3c24xx-i2s.c
 delete mode 100644 sound/soc/s3c24xx/s3c24xx-i2s.h
 delete mode 100644 sound/soc/s3c24xx/s3c24xx_simtec.c
 delete mode 100644 sound/soc/s3c24xx/s3c24xx_simtec.h
 delete mode 100644 sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
 delete mode 100644 sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
 delete mode 100644 sound/soc/s3c24xx/s3c24xx_uda134x.c
 delete mode 100644 sound/soc/s3c24xx/smartq_wm8987.c
 delete mode 100644 sound/soc/s3c24xx/smdk2443_wm9710.c
 delete mode 100644 sound/soc/s3c24xx/smdk_spdif.c
 delete mode 100644 sound/soc/s3c24xx/smdk_wm8580.c
 delete mode 100644 sound/soc/s3c24xx/smdk_wm9713.c
 delete mode 100644 sound/soc/s3c24xx/spdif.c
 delete mode 100644 sound/soc/s3c24xx/spdif.h
 create mode 100644 sound/soc/samsung/Kconfig
 create mode 100644 sound/soc/samsung/Makefile
 create mode 100644 sound/soc/samsung/ac97.c
 create mode 100644 sound/soc/samsung/ac97.h
 create mode 100644 sound/soc/samsung/dma.c
 create mode 100644 sound/soc/samsung/dma.h
 create mode 100644 sound/soc/samsung/goni_wm8994.c
 create mode 100644 sound/soc/samsung/i2s.c
 create mode 100644 sound/soc/samsung/i2s.h
 create mode 100644 sound/soc/samsung/jive_wm8750.c
 create mode 100644 sound/soc/samsung/lm4857.h
 create mode 100644 sound/soc/samsung/ln2440sbc_alc650.c
 create mode 100644 sound/soc/samsung/neo1973_gta02_wm8753.c
 create mode 100644 sound/soc/samsung/neo1973_wm8753.c
 create mode 100644 sound/soc/samsung/pcm.c
 create mode 100644 sound/soc/samsung/pcm.h
 create mode 100644 sound/soc/samsung/regs-i2s-v2.h
 create mode 100644 sound/soc/samsung/rx1950_uda1380.c
 create mode 100644 sound/soc/samsung/s3c-i2s-v2.c
 create mode 100644 sound/soc/samsung/s3c-i2s-v2.h
 create mode 100644 sound/soc/samsung/s3c2412-i2s.c
 create mode 100644 sound/soc/samsung/s3c2412-i2s.h
 create mode 100644 sound/soc/samsung/s3c24xx-i2s.c
 create mode 100644 sound/soc/samsung/s3c24xx-i2s.h
 create mode 100644 sound/soc/samsung/s3c24xx_simtec.c
 create mode 100644 sound/soc/samsung/s3c24xx_simtec.h
 create mode 100644 sound/soc/samsung/s3c24xx_simtec_hermes.c
 create mode 100644 sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c
 create mode 100644 sound/soc/samsung/s3c24xx_uda134x.c
 create mode 100644 sound/soc/samsung/smartq_wm8987.c
 create mode 100644 sound/soc/samsung/smdk2443_wm9710.c
 create mode 100644 sound/soc/samsung/smdk_spdif.c
 create mode 100644 sound/soc/samsung/smdk_wm8580.c
 create mode 100644 sound/soc/samsung/smdk_wm9713.c
 create mode 100644 sound/soc/samsung/spdif.c
 create mode 100644 sound/soc/samsung/spdif.h

diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
index 3e598e7..2722b19 100644
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
@@ -36,7 +36,7 @@ source "sound/soc/nuc900/Kconfig"
 source "sound/soc/omap/Kconfig"
 source "sound/soc/kirkwood/Kconfig"
 source "sound/soc/pxa/Kconfig"
-source "sound/soc/s3c24xx/Kconfig"
+source "sound/soc/samsung/Kconfig"
 source "sound/soc/s6000/Kconfig"
 source "sound/soc/sh/Kconfig"
 source "sound/soc/txx9/Kconfig"
diff --git a/sound/soc/Makefile b/sound/soc/Makefile
index eb18344..ce913bf 100644
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
@@ -14,7 +14,7 @@ obj-$(CONFIG_SND_SOC)	+= nuc900/
 obj-$(CONFIG_SND_SOC)	+= omap/
 obj-$(CONFIG_SND_SOC)	+= kirkwood/
 obj-$(CONFIG_SND_SOC)	+= pxa/
-obj-$(CONFIG_SND_SOC)	+= s3c24xx/
+obj-$(CONFIG_SND_SOC)	+= samsung/
 obj-$(CONFIG_SND_SOC)	+= s6000/
 obj-$(CONFIG_SND_SOC)	+= sh/
 obj-$(CONFIG_SND_SOC)	+= txx9/
diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
deleted file mode 100644
index 140095e..0000000
--- a/sound/soc/s3c24xx/Kconfig
+++ /dev/null
@@ -1,154 +0,0 @@
-config ASOC_SAMSUNG
-	tristate "ASoC support for Samsung"
-	depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210
-	select S3C64XX_DMA if ARCH_S3C64XX
-	help
-	  Say Y or M if you want to add support for codecs attached to
-	  the Samsung SoCs' Audio interfaces. You will also need to
-	  select the audio interfaces to support below.
-
-config SND_S3C24XX_I2S
-	tristate
-	select S3C2410_DMA
-
-config SND_S3C_I2SV2_SOC
-	tristate
-
-config SND_S3C2412_SOC_I2S
-	tristate
-	select SND_S3C_I2SV2_SOC
-	select S3C2410_DMA
-
-config SND_SAMSUNG_PCM
-	tristate
-
-config SND_SAMSUNG_AC97
-	tristate
-	select SND_SOC_AC97_BUS
-
-config SND_SAMSUNG_SPDIF
-	tristate
-	select SND_SOC_SPDIF
-
-config SND_SAMSUNG_I2S
-	tristate
-
-config ASOC_SAMSUNG_NEO1973_WM8753
-	tristate "SoC I2S Audio support for NEO1973 - WM8753"
-	depends on ASOC_SAMSUNG && MACH_NEO1973_GTA01
-	select SND_S3C24XX_I2S
-	select SND_SOC_WM8753
-	help
-	  Say Y if you want to add support for SoC audio on smdk2440
-	  with the WM8753.
-
-config ASOC_SAMSUNG_NEO1973_GTA02_WM8753
-	tristate "Audio support for the Openmoko Neo FreeRunner (GTA02)"
-	depends on ASOC_SAMSUNG && MACH_NEO1973_GTA02
-	select SND_S3C24XX_I2S
-	select SND_SOC_WM8753
-	help
-	  This driver provides audio support for the Openmoko Neo FreeRunner
-	  smartphone.
-	  
-config ASOC_SAMSUNG_JIVE_WM8750
-	tristate "SoC I2S Audio support for Jive"
-	depends on ASOC_SAMSUNG && MACH_JIVE
-	select SND_SOC_WM8750
-	select SND_S3C2412_SOC_I2S
-	help
-	  Sat Y if you want to add support for SoC audio on the Jive.
-
-config ASOC_SAMSUNG_SMDK_WM8580
-	tristate "SoC I2S Audio support for WM8580 on SMDK"
-	depends on ASOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100)
-	select SND_SOC_WM8580
-	select SND_SAMSUNG_I2S
-	help
-	  Say Y if you want to add support for SoC audio on the SMDKs.
-
-config ASOC_SAMSUNG_SMDK2443_WM9710
-	tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
-	depends on ASOC_SAMSUNG && MACH_SMDK2443
-	select S3C2410_DMA
-	select AC97_BUS
-	select SND_SOC_AC97_CODEC
-	select SND_SAMSUNG_AC97
-	help
-	  Say Y if you want to add support for SoC audio on smdk2443
-	  with the WM9710.
-
-config ASOC_SAMSUNG_LN2440SBC_ALC650
-	tristate "SoC AC97 Audio support for LN2440SBC - ALC650"
-	depends on ASOC_SAMSUNG && ARCH_S3C2410
-	select S3C2410_DMA
-	select AC97_BUS
-	select SND_SOC_AC97_CODEC
-	select SND_SAMSUNG_AC97
-	help
-	  Say Y if you want to add support for SoC audio on ln2440sbc
-	  with the ALC650.
-
-config ASOC_SAMSUNG_S3C24XX_UDA134X
-	tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
-	depends on ASOC_SAMSUNG && ARCH_S3C2410
-	select SND_S3C24XX_I2S
-	select SND_SOC_L3
-	select SND_SOC_UDA134X
-
-config ASOC_SAMSUNG_SIMTEC
-	tristate
-	help
-	  Internal node for common S3C24XX/Simtec suppor
-
-config ASOC_SAMSUNG_SIMTEC_TLV320AIC23
-	tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
-	depends on ASOC_SAMSUNG && ARCH_S3C2410
-	select SND_S3C24XX_I2S
-	select SND_SOC_TLV320AIC23
-	select ASOC_SAMSUNG_SIMTEC
-
-config ASOC_SAMSUNG_SIMTEC_HERMES
-	tristate "SoC I2S Audio support for Simtec Hermes board"
-	depends on ASOC_SAMSUNG && ARCH_S3C2410
-	select SND_S3C24XX_I2S
-	select SND_SOC_TLV320AIC3X
-	select ASOC_SAMSUNG_SIMTEC
-
-config ASOC_SAMSUNG_RX1950_UDA1380
-	tristate "Audio support for the HP iPAQ RX1950"
-	depends on ASOC_SAMSUNG && MACH_RX1950
-	select SND_S3C24XX_I2S
-	select SND_SOC_UDA1380
-	help
-	  This driver provides audio support for HP iPAQ RX1950 PDA.
-
-config ASOC_SAMSUNG_SMDK_WM9713
-	tristate "SoC AC97 Audio support for SMDK with WM9713"
-	depends on ASOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110)
-	select SND_SOC_WM9713
-	select SND_SAMSUNG_AC97
-	help
-	  Sat Y if you want to add support for SoC audio on the SMDK.
-
-config ASOC_SMARTQ
-	tristate "SoC I2S Audio support for SmartQ board"
-	depends on ASOC_SAMSUNG && MACH_SMARTQ
-	select SND_SAMSUNG_I2S
-	select SND_SOC_WM8750
-
-config ASOC_GONI_AQUILA_WM8994
-	tristate "SoC I2S Audio support for AQUILA/GONI - WM8994"
-	depends on ASOC_SAMSUNG && (MACH_GONI || MACH_AQUILA)
-	select SND_SAMSUNG_I2S
-	select SND_SOC_WM8994
-	help
-	  Say Y if you want to add support for SoC audio on goni or aquila
-	  with the WM8994.
-
-config ASOC_SAMSUNG_SMDK_SPDIF
-	tristate "SoC S/PDIF Audio support for SMDK"
-	depends on SND_S3C24XX_SOC && (MACH_SMDKC100 || MACH_SMDKC110 || MACH_SMDKV210)
-	select SND_SAMSUNG_SPDIF
-	help
-	  Say Y if you want to add support for SoC S/PDIF audio on the SMDK.
diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile
deleted file mode 100644
index 0d24f95..0000000
--- a/sound/soc/s3c24xx/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-# S3c24XX Platform Support
-snd-soc-s3c24xx-objs := dma.o
-snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o
-snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o
-snd-soc-ac97-objs := ac97.o
-snd-soc-s3c-i2s-v2-objs := s3c-i2s-v2.o
-snd-soc-samsung-spdif-objs := spdif.o
-snd-soc-pcm-objs := pcm.o
-snd-soc-i2s-objs := i2s.o
-
-obj-$(CONFIG_ASOC_SAMSUNG) += snd-soc-s3c24xx.o
-obj-$(CONFIG_SND_S3C24XX_I2S) += snd-soc-s3c24xx-i2s.o
-obj-$(CONFIG_SND_SAMSUNG_AC97) += snd-soc-ac97.o
-obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o
-obj-$(CONFIG_SND_S3C_I2SV2_SOC) += snd-soc-s3c-i2s-v2.o
-obj-$(CONFIG_SND_SAMSUNG_SPDIF) += snd-soc-samsung-spdif.o
-obj-$(CONFIG_SND_SAMSUNG_PCM) += snd-soc-pcm.o
-obj-$(CONFIG_SND_SAMSUNG_I2S) += snd-soc-i2s.o
-
-# S3C24XX Machine Support
-snd-soc-jive-wm8750-objs := jive_wm8750.o
-snd-soc-neo1973-wm8753-objs := neo1973_wm8753.o
-snd-soc-neo1973-gta02-wm8753-objs := neo1973_gta02_wm8753.o
-snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o
-snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o
-snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o
-snd-soc-s3c24xx-simtec-objs := s3c24xx_simtec.o
-snd-soc-s3c24xx-simtec-hermes-objs := s3c24xx_simtec_hermes.o
-snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o
-snd-soc-rx1950-uda1380-objs := rx1950_uda1380.o
-snd-soc-smdk-wm8580-objs := smdk_wm8580.o
-snd-soc-smdk-wm9713-objs := smdk_wm9713.o
-snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o
-snd-soc-goni-wm8994-objs := goni_wm8994.o
-snd-soc-smdk-spdif-objs := smdk_spdif.o
-
-obj-$(CONFIG_ASOC_SAMSUNG_JIVE_WM8750) += snd-soc-jive-wm8750.o
-obj-$(CONFIG_ASOC_SAMSUNG_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
-obj-$(CONFIG_ASOC_SAMSUNG_NEO1973_GTA02_WM8753) += snd-soc-neo1973-gta02-wm8753.o
-obj-$(CONFIG_ASOC_SAMSUNG_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o
-obj-$(CONFIG_ASOC_SAMSUNG_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o
-obj-$(CONFIG_ASOC_SAMSUNG_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
-obj-$(CONFIG_ASOC_SAMSUNG_SIMTEC) += snd-soc-s3c24xx-simtec.o
-obj-$(CONFIG_ASOC_SAMSUNG_SIMTEC_HERMES) += snd-soc-s3c24xx-simtec-hermes.o
-obj-$(CONFIG_ASOC_SAMSUNG_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv320aic23.o
-obj-$(CONFIG_ASOC_SAMSUNG_RX1950_UDA1380) += snd-soc-rx1950-uda1380.o
-obj-$(CONFIG_ASOC_SAMSUNG_SMDK_WM8580) += snd-soc-smdk-wm8580.o
-obj-$(CONFIG_ASOC_SAMSUNG_SMDK_WM9713) += snd-soc-smdk-wm9713.o
-obj-$(CONFIG_ASOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o
-obj-$(CONFIG_ASOC_SAMSUNG_SMDK_SPDIF) += snd-soc-smdk-spdif.o
-obj-$(CONFIG_ASOC_GONI_AQUILA_WM8994) += snd-soc-goni-wm8994.o
diff --git a/sound/soc/s3c24xx/ac97.c b/sound/soc/s3c24xx/ac97.c
deleted file mode 100644
index 4f999d1..0000000
--- a/sound/soc/s3c24xx/ac97.c
+++ /dev/null
@@ -1,520 +0,0 @@
-/* sound/soc/s3c24xx/ac97.c
- *
- * ALSA SoC Audio Layer - S3C AC97 Controller driver
- * 	Evolved from s3c2443-ac97.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- * 	Author: Jaswinder Singh <jassi.brar@samsung.com>
- * 	Credits: Graeme Gregory, Sean Choi
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-
-#include <sound/soc.h>
-
-#include <plat/regs-ac97.h>
-#include <mach/dma.h>
-#include <plat/audio.h>
-
-#include "dma.h"
-#include "ac97.h"
-
-#define AC_CMD_ADDR(x) (x << 16)
-#define AC_CMD_DATA(x) (x & 0xffff)
-
-struct s3c_ac97_info {
-	struct clk         *ac97_clk;
-	void __iomem	   *regs;
-	struct mutex       lock;
-	struct completion  done;
-};
-static struct s3c_ac97_info s3c_ac97;
-
-static struct s3c2410_dma_client s3c_dma_client_out = {
-	.name = "AC97 PCMOut"
-};
-
-static struct s3c2410_dma_client s3c_dma_client_in = {
-	.name = "AC97 PCMIn"
-};
-
-static struct s3c2410_dma_client s3c_dma_client_micin = {
-	.name = "AC97 MicIn"
-};
-
-static struct s3c_dma_params s3c_ac97_pcm_out = {
-	.client		= &s3c_dma_client_out,
-	.dma_size	= 4,
-};
-
-static struct s3c_dma_params s3c_ac97_pcm_in = {
-	.client		= &s3c_dma_client_in,
-	.dma_size	= 4,
-};
-
-static struct s3c_dma_params s3c_ac97_mic_in = {
-	.client		= &s3c_dma_client_micin,
-	.dma_size	= 4,
-};
-
-static void s3c_ac97_activate(struct snd_ac97 *ac97)
-{
-	u32 ac_glbctrl, stat;
-
-	stat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT) & 0x7;
-	if (stat == S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE)
-		return; /* Return if already active */
-
-	INIT_COMPLETION(s3c_ac97.done);
-
-	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	ac_glbctrl = S3C_AC97_GLBCTRL_ACLINKON;
-	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	msleep(1);
-
-	ac_glbctrl |= S3C_AC97_GLBCTRL_TRANSFERDATAENABLE;
-	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	msleep(1);
-
-	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE;
-	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-
-	if (!wait_for_completion_timeout(&s3c_ac97.done, HZ))
-		pr_err("AC97: Unable to activate!");
-}
-
-static unsigned short s3c_ac97_read(struct snd_ac97 *ac97,
-	unsigned short reg)
-{
-	u32 ac_glbctrl, ac_codec_cmd;
-	u32 stat, addr, data;
-
-	mutex_lock(&s3c_ac97.lock);
-
-	s3c_ac97_activate(ac97);
-
-	INIT_COMPLETION(s3c_ac97.done);
-
-	ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD);
-	ac_codec_cmd = S3C_AC97_CODEC_CMD_READ | AC_CMD_ADDR(reg);
-	writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD);
-
-	udelay(50);
-
-	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE;
-	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-
-	if (!wait_for_completion_timeout(&s3c_ac97.done, HZ))
-		pr_err("AC97: Unable to read!");
-
-	stat = readl(s3c_ac97.regs + S3C_AC97_STAT);
-	addr = (stat >> 16) & 0x7f;
-	data = (stat & 0xffff);
-
-	if (addr != reg)
-		pr_err("ac97: req addr = %02x, rep addr = %02x\n",
-			reg, addr);
-
-	mutex_unlock(&s3c_ac97.lock);
-
-	return (unsigned short)data;
-}
-
-static void s3c_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
-	unsigned short val)
-{
-	u32 ac_glbctrl, ac_codec_cmd;
-
-	mutex_lock(&s3c_ac97.lock);
-
-	s3c_ac97_activate(ac97);
-
-	INIT_COMPLETION(s3c_ac97.done);
-
-	ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD);
-	ac_codec_cmd = AC_CMD_ADDR(reg) | AC_CMD_DATA(val);
-	writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD);
-
-	udelay(50);
-
-	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE;
-	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-
-	if (!wait_for_completion_timeout(&s3c_ac97.done, HZ))
-		pr_err("AC97: Unable to write!");
-
-	ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD);
-	ac_codec_cmd |= S3C_AC97_CODEC_CMD_READ;
-	writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD);
-
-	mutex_unlock(&s3c_ac97.lock);
-}
-
-static void s3c_ac97_cold_reset(struct snd_ac97 *ac97)
-{
-	pr_debug("AC97: Cold reset\n");
-	writel(S3C_AC97_GLBCTRL_COLDRESET,
-			s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	msleep(1);
-
-	writel(0, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	msleep(1);
-}
-
-static void s3c_ac97_warm_reset(struct snd_ac97 *ac97)
-{
-	u32 stat;
-
-	stat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT) & 0x7;
-	if (stat == S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE)
-		return; /* Return if already active */
-
-	pr_debug("AC97: Warm reset\n");
-
-	writel(S3C_AC97_GLBCTRL_WARMRESET, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	msleep(1);
-
-	writel(0, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	msleep(1);
-
-	s3c_ac97_activate(ac97);
-}
-
-static irqreturn_t s3c_ac97_irq(int irq, void *dev_id)
-{
-	u32 ac_glbctrl, ac_glbstat;
-
-	ac_glbstat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT);
-
-	if (ac_glbstat & S3C_AC97_GLBSTAT_CODECREADY) {
-
-		ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
-		ac_glbctrl &= ~S3C_AC97_GLBCTRL_CODECREADYIE;
-		writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-
-		complete(&s3c_ac97.done);
-	}
-
-	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	ac_glbctrl |= (1<<30); /* Clear interrupt */
-	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-
-	return IRQ_HANDLED;
-}
-
-struct snd_ac97_bus_ops soc_ac97_ops = {
-	.read       = s3c_ac97_read,
-	.write      = s3c_ac97_write,
-	.warm_reset = s3c_ac97_warm_reset,
-	.reset      = s3c_ac97_cold_reset,
-};
-EXPORT_SYMBOL_GPL(soc_ac97_ops);
-
-static int s3c_ac97_hw_params(struct snd_pcm_substream *substream,
-				  struct snd_pcm_hw_params *params,
-				  struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct s3c_dma_params *dma_data;
-
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		dma_data = &s3c_ac97_pcm_out;
-	else
-		dma_data = &s3c_ac97_pcm_in;
-
-	snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
-
-	return 0;
-}
-
-static int s3c_ac97_trigger(struct snd_pcm_substream *substream, int cmd,
-				struct snd_soc_dai *dai)
-{
-	u32 ac_glbctrl;
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct s3c_dma_params *dma_data =
-		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
-
-	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
-		ac_glbctrl &= ~S3C_AC97_GLBCTRL_PCMINTM_MASK;
-	else
-		ac_glbctrl &= ~S3C_AC97_GLBCTRL_PCMOUTTM_MASK;
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-	case SNDRV_PCM_TRIGGER_RESUME:
-	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
-			ac_glbctrl |= S3C_AC97_GLBCTRL_PCMINTM_DMA;
-		else
-			ac_glbctrl |= S3C_AC97_GLBCTRL_PCMOUTTM_DMA;
-		break;
-
-	case SNDRV_PCM_TRIGGER_STOP:
-	case SNDRV_PCM_TRIGGER_SUSPEND:
-	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		break;
-	}
-
-	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-
-	s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
-
-	return 0;
-}
-
-static int s3c_ac97_hw_mic_params(struct snd_pcm_substream *substream,
-				      struct snd_pcm_hw_params *params,
-				      struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		return -ENODEV;
-	else
-		snd_soc_dai_set_dma_data(cpu_dai, substream, &s3c_ac97_mic_in);
-
-	return 0;
-}
-
-static int s3c_ac97_mic_trigger(struct snd_pcm_substream *substream,
-				    int cmd, struct snd_soc_dai *dai)
-{
-	u32 ac_glbctrl;
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct s3c_dma_params *dma_data =
-		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
-
-	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
-	ac_glbctrl &= ~S3C_AC97_GLBCTRL_MICINTM_MASK;
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-	case SNDRV_PCM_TRIGGER_RESUME:
-	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		ac_glbctrl |= S3C_AC97_GLBCTRL_MICINTM_DMA;
-		break;
-
-	case SNDRV_PCM_TRIGGER_STOP:
-	case SNDRV_PCM_TRIGGER_SUSPEND:
-	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		break;
-	}
-
-	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
-
-	s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
-
-	return 0;
-}
-
-static struct snd_soc_dai_ops s3c_ac97_dai_ops = {
-	.hw_params	= s3c_ac97_hw_params,
-	.trigger	= s3c_ac97_trigger,
-};
-
-static struct snd_soc_dai_ops s3c_ac97_mic_dai_ops = {
-	.hw_params	= s3c_ac97_hw_mic_params,
-	.trigger	= s3c_ac97_mic_trigger,
-};
-
-static struct snd_soc_dai_driver s3c_ac97_dai[] = {
-	[S3C_AC97_DAI_PCM] = {
-		.name =	"samsung-ac97",
-		.ac97_control = 1,
-		.playback = {
-			.stream_name = "AC97 Playback",
-			.channels_min = 2,
-			.channels_max = 2,
-			.rates = SNDRV_PCM_RATE_8000_48000,
-			.formats = SNDRV_PCM_FMTBIT_S16_LE,},
-		.capture = {
-			.stream_name = "AC97 Capture",
-			.channels_min = 2,
-			.channels_max = 2,
-			.rates = SNDRV_PCM_RATE_8000_48000,
-			.formats = SNDRV_PCM_FMTBIT_S16_LE,},
-		.ops = &s3c_ac97_dai_ops,
-	},
-	[S3C_AC97_DAI_MIC] = {
-		.name = "samsung-ac97-mic",
-		.ac97_control = 1,
-		.capture = {
-			.stream_name = "AC97 Mic Capture",
-			.channels_min = 1,
-			.channels_max = 1,
-			.rates = SNDRV_PCM_RATE_8000_48000,
-			.formats = SNDRV_PCM_FMTBIT_S16_LE,},
-		.ops = &s3c_ac97_mic_dai_ops,
-	},
-};
-
-static __devinit int s3c_ac97_probe(struct platform_device *pdev)
-{
-	struct resource *mem_res, *dmatx_res, *dmarx_res, *dmamic_res, *irq_res;
-	struct s3c_audio_pdata *ac97_pdata;
-	int ret;
-
-	ac97_pdata = pdev->dev.platform_data;
-	if (!ac97_pdata || !ac97_pdata->cfg_gpio) {
-		dev_err(&pdev->dev, "cfg_gpio callback not provided!\n");
-		return -EINVAL;
-	}
-
-	/* Check for availability of necessary resource */
-	dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	if (!dmatx_res) {
-		dev_err(&pdev->dev, "Unable to get AC97-TX dma resource\n");
-		return -ENXIO;
-	}
-
-	dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-	if (!dmarx_res) {
-		dev_err(&pdev->dev, "Unable to get AC97-RX dma resource\n");
-		return -ENXIO;
-	}
-
-	dmamic_res = platform_get_resource(pdev, IORESOURCE_DMA, 2);
-	if (!dmamic_res) {
-		dev_err(&pdev->dev, "Unable to get AC97-MIC dma resource\n");
-		return -ENXIO;
-	}
-
-	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem_res) {
-		dev_err(&pdev->dev, "Unable to get register resource\n");
-		return -ENXIO;
-	}
-
-	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!irq_res) {
-		dev_err(&pdev->dev, "AC97 IRQ not provided!\n");
-		return -ENXIO;
-	}
-
-	if (!request_mem_region(mem_res->start,
-				resource_size(mem_res), "ac97")) {
-		dev_err(&pdev->dev, "Unable to request register region\n");
-		return -EBUSY;
-	}
-
-	s3c_ac97_pcm_out.channel = dmatx_res->start;
-	s3c_ac97_pcm_out.dma_addr = mem_res->start + S3C_AC97_PCM_DATA;
-	s3c_ac97_pcm_in.channel = dmarx_res->start;
-	s3c_ac97_pcm_in.dma_addr = mem_res->start + S3C_AC97_PCM_DATA;
-	s3c_ac97_mic_in.channel = dmamic_res->start;
-	s3c_ac97_mic_in.dma_addr = mem_res->start + S3C_AC97_MIC_DATA;
-
-	init_completion(&s3c_ac97.done);
-	mutex_init(&s3c_ac97.lock);
-
-	s3c_ac97.regs = ioremap(mem_res->start, resource_size(mem_res));
-	if (s3c_ac97.regs == NULL) {
-		dev_err(&pdev->dev, "Unable to ioremap register region\n");
-		ret = -ENXIO;
-		goto err1;
-	}
-
-	s3c_ac97.ac97_clk = clk_get(&pdev->dev, "ac97");
-	if (IS_ERR(s3c_ac97.ac97_clk)) {
-		dev_err(&pdev->dev, "ac97 failed to get ac97_clock\n");
-		ret = -ENODEV;
-		goto err2;
-	}
-	clk_enable(s3c_ac97.ac97_clk);
-
-	if (ac97_pdata->cfg_gpio(pdev)) {
-		dev_err(&pdev->dev, "Unable to configure gpio\n");
-		ret = -EINVAL;
-		goto err3;
-	}
-
-	ret = request_irq(irq_res->start, s3c_ac97_irq,
-					IRQF_DISABLED, "AC97", NULL);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "ac97: interrupt request failed.\n");
-		goto err4;
-	}
-
-	ret = snd_soc_register_dais(&pdev->dev, s3c_ac97_dai,
-			ARRAY_SIZE(s3c_ac97_dai));
-	if (ret)
-		goto err5;
-
-	return 0;
-
-err5:
-	free_irq(irq_res->start, NULL);
-err4:
-err3:
-	clk_disable(s3c_ac97.ac97_clk);
-	clk_put(s3c_ac97.ac97_clk);
-err2:
-	iounmap(s3c_ac97.regs);
-err1:
-	release_mem_region(mem_res->start, resource_size(mem_res));
-
-	return ret;
-}
-
-static __devexit int s3c_ac97_remove(struct platform_device *pdev)
-{
-	struct resource *mem_res, *irq_res;
-
-	snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(s3c_ac97_dai));
-
-	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (irq_res)
-		free_irq(irq_res->start, NULL);
-
-	clk_disable(s3c_ac97.ac97_clk);
-	clk_put(s3c_ac97.ac97_clk);
-
-	iounmap(s3c_ac97.regs);
-
-	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (mem_res)
-		release_mem_region(mem_res->start, resource_size(mem_res));
-
-	return 0;
-}
-
-static struct platform_driver s3c_ac97_driver = {
-	.probe  = s3c_ac97_probe,
-	.remove = s3c_ac97_remove,
-	.driver = {
-		.name = "samsung-ac97",
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init s3c_ac97_init(void)
-{
-	return platform_driver_register(&s3c_ac97_driver);
-}
-module_init(s3c_ac97_init);
-
-static void __exit s3c_ac97_exit(void)
-{
-	platform_driver_unregister(&s3c_ac97_driver);
-}
-module_exit(s3c_ac97_exit);
-
-MODULE_AUTHOR("Jaswinder Singh, <jassi.brar@samsung.com>");
-MODULE_DESCRIPTION("AC97 driver for the Samsung SoC");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:samsung-ac97");
diff --git a/sound/soc/s3c24xx/ac97.h b/sound/soc/s3c24xx/ac97.h
deleted file mode 100644
index a8f01b7..0000000
--- a/sound/soc/s3c24xx/ac97.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* sound/soc/s3c24xx/ac97.h
- *
- * ALSA SoC Audio Layer - S3C AC97 Controller driver
- *	Evolved from s3c2443-ac97.h
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- *	Author: Jaswinder Singh <jassi.brar@samsung.com>
- *	Credits: Graeme Gregory, Sean Choi
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S3C_AC97_H_
-#define __S3C_AC97_H_
-
-#define S3C_AC97_DAI_PCM 0
-#define S3C_AC97_DAI_MIC 1
-
-#endif /* __S3C_AC97_H_ */
diff --git a/sound/soc/s3c24xx/dma.c b/sound/soc/s3c24xx/dma.c
deleted file mode 100644
index 12622f3..0000000
--- a/sound/soc/s3c24xx/dma.c
+++ /dev/null
@@ -1,503 +0,0 @@
-/*
- * dma.c  --  ALSA Soc Audio Layer
- *
- * (c) 2006 Wolfson Microelectronics PLC.
- * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
- *
- * Copyright 2004-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/dma-mapping.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-
-#include <asm/dma.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-
-#include "dma.h"
-
-static const struct snd_pcm_hardware dma_hardware = {
-	.info			= SNDRV_PCM_INFO_INTERLEAVED |
-				    SNDRV_PCM_INFO_BLOCK_TRANSFER |
-				    SNDRV_PCM_INFO_MMAP |
-				    SNDRV_PCM_INFO_MMAP_VALID |
-				    SNDRV_PCM_INFO_PAUSE |
-				    SNDRV_PCM_INFO_RESUME,
-	.formats		= SNDRV_PCM_FMTBIT_S16_LE |
-				    SNDRV_PCM_FMTBIT_U16_LE |
-				    SNDRV_PCM_FMTBIT_U8 |
-				    SNDRV_PCM_FMTBIT_S8,
-	.channels_min		= 2,
-	.channels_max		= 2,
-	.buffer_bytes_max	= 128*1024,
-	.period_bytes_min	= PAGE_SIZE,
-	.period_bytes_max	= PAGE_SIZE*2,
-	.periods_min		= 2,
-	.periods_max		= 128,
-	.fifo_size		= 32,
-};
-
-struct runtime_data {
-	spinlock_t lock;
-	int state;
-	unsigned int dma_loaded;
-	unsigned int dma_limit;
-	unsigned int dma_period;
-	dma_addr_t dma_start;
-	dma_addr_t dma_pos;
-	dma_addr_t dma_end;
-	struct s3c_dma_params *params;
-};
-
-/* dma_enqueue
- *
- * place a dma buffer onto the queue for the dma system
- * to handle.
-*/
-static void dma_enqueue(struct snd_pcm_substream *substream)
-{
-	struct runtime_data *prtd = substream->runtime->private_data;
-	dma_addr_t pos = prtd->dma_pos;
-	unsigned int limit;
-	int ret;
-
-	pr_debug("Entered %s\n", __func__);
-
-	if (s3c_dma_has_circular())
-		limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
-	else
-		limit = prtd->dma_limit;
-
-	pr_debug("%s: loaded %d, limit %d\n",
-				__func__, prtd->dma_loaded, limit);
-
-	while (prtd->dma_loaded < limit) {
-		unsigned long len = prtd->dma_period;
-
-		pr_debug("dma_loaded: %d\n", prtd->dma_loaded);
-
-		if ((pos + len) > prtd->dma_end) {
-			len  = prtd->dma_end - pos;
-			pr_debug(KERN_DEBUG "%s: corrected dma len %ld\n",
-			       __func__, len);
-		}
-
-		ret = s3c2410_dma_enqueue(prtd->params->channel,
-			substream, pos, len);
-
-		if (ret == 0) {
-			prtd->dma_loaded++;
-			pos += prtd->dma_period;
-			if (pos >= prtd->dma_end)
-				pos = prtd->dma_start;
-		} else
-			break;
-	}
-
-	prtd->dma_pos = pos;
-}
-
-static void audio_buffdone(struct s3c2410_dma_chan *channel,
-				void *dev_id, int size,
-				enum s3c2410_dma_buffresult result)
-{
-	struct snd_pcm_substream *substream = dev_id;
-	struct runtime_data *prtd;
-
-	pr_debug("Entered %s\n", __func__);
-
-	if (result == S3C2410_RES_ABORT || result == S3C2410_RES_ERR)
-		return;
-
-	prtd = substream->runtime->private_data;
-
-	if (substream)
-		snd_pcm_period_elapsed(substream);
-
-	spin_lock(&prtd->lock);
-	if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) {
-		prtd->dma_loaded--;
-		dma_enqueue(substream);
-	}
-
-	spin_unlock(&prtd->lock);
-}
-
-static int dma_hw_params(struct snd_pcm_substream *substream,
-	struct snd_pcm_hw_params *params)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct runtime_data *prtd = runtime->private_data;
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	unsigned long totbytes = params_buffer_bytes(params);
-	struct s3c_dma_params *dma =
-		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
-	int ret = 0;
-
-
-	pr_debug("Entered %s\n", __func__);
-
-	/* return if this is a bufferless transfer e.g.
-	 * codec <--> BT codec or GSM modem -- lg FIXME */
-	if (!dma)
-		return 0;
-
-	/* this may get called several times by oss emulation
-	 * with different params -HW */
-	if (prtd->params == NULL) {
-		/* prepare DMA */
-		prtd->params = dma;
-
-		pr_debug("params %p, client %p, channel %d\n", prtd->params,
-			prtd->params->client, prtd->params->channel);
-
-		ret = s3c2410_dma_request(prtd->params->channel,
-					  prtd->params->client, NULL);
-
-		if (ret < 0) {
-			printk(KERN_ERR "failed to get dma channel\n");
-			return ret;
-		}
-
-		/* use the circular buffering if we have it available. */
-		if (s3c_dma_has_circular())
-			s3c2410_dma_setflags(prtd->params->channel,
-					     S3C2410_DMAF_CIRCULAR);
-	}
-
-	s3c2410_dma_set_buffdone_fn(prtd->params->channel,
-				    audio_buffdone);
-
-	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
-
-	runtime->dma_bytes = totbytes;
-
-	spin_lock_irq(&prtd->lock);
-	prtd->dma_loaded = 0;
-	prtd->dma_limit = runtime->hw.periods_min;
-	prtd->dma_period = params_period_bytes(params);
-	prtd->dma_start = runtime->dma_addr;
-	prtd->dma_pos = prtd->dma_start;
-	prtd->dma_end = prtd->dma_start + totbytes;
-	spin_unlock_irq(&prtd->lock);
-
-	return 0;
-}
-
-static int dma_hw_free(struct snd_pcm_substream *substream)
-{
-	struct runtime_data *prtd = substream->runtime->private_data;
-
-	pr_debug("Entered %s\n", __func__);
-
-	/* TODO - do we need to ensure DMA flushed */
-	snd_pcm_set_runtime_buffer(substream, NULL);
-
-	if (prtd->params) {
-		s3c2410_dma_free(prtd->params->channel, prtd->params->client);
-		prtd->params = NULL;
-	}
-
-	return 0;
-}
-
-static int dma_prepare(struct snd_pcm_substream *substream)
-{
-	struct runtime_data *prtd = substream->runtime->private_data;
-	int ret = 0;
-
-	pr_debug("Entered %s\n", __func__);
-
-	/* return if this is a bufferless transfer e.g.
-	 * codec <--> BT codec or GSM modem -- lg FIXME */
-	if (!prtd->params)
-		return 0;
-
-	/* channel needs configuring for mem=>device, increment memory addr,
-	 * sync to pclk, half-word transfers to the IIS-FIFO. */
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		s3c2410_dma_devconfig(prtd->params->channel,
-				      S3C2410_DMASRC_MEM,
-				      prtd->params->dma_addr);
-	} else {
-		s3c2410_dma_devconfig(prtd->params->channel,
-				      S3C2410_DMASRC_HW,
-				      prtd->params->dma_addr);
-	}
-
-	s3c2410_dma_config(prtd->params->channel,
-			   prtd->params->dma_size);
-
-	/* flush the DMA channel */
-	s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
-	prtd->dma_loaded = 0;
-	prtd->dma_pos = prtd->dma_start;
-
-	/* enqueue dma buffers */
-	dma_enqueue(substream);
-
-	return ret;
-}
-
-static int dma_trigger(struct snd_pcm_substream *substream, int cmd)
-{
-	struct runtime_data *prtd = substream->runtime->private_data;
-	int ret = 0;
-
-	pr_debug("Entered %s\n", __func__);
-
-	spin_lock(&prtd->lock);
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-	case SNDRV_PCM_TRIGGER_RESUME:
-	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		prtd->state |= ST_RUNNING;
-		s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_START);
-		break;
-
-	case SNDRV_PCM_TRIGGER_STOP:
-	case SNDRV_PCM_TRIGGER_SUSPEND:
-	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		prtd->state &= ~ST_RUNNING;
-		s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STOP);
-		break;
-
-	default:
-		ret = -EINVAL;
-		break;
-	}
-
-	spin_unlock(&prtd->lock);
-
-	return ret;
-}
-
-static snd_pcm_uframes_t
-dma_pointer(struct snd_pcm_substream *substream)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct runtime_data *prtd = runtime->private_data;
-	unsigned long res;
-	dma_addr_t src, dst;
-
-	pr_debug("Entered %s\n", __func__);
-
-	spin_lock(&prtd->lock);
-	s3c2410_dma_getposition(prtd->params->channel, &src, &dst);
-
-	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
-		res = dst - prtd->dma_start;
-	else
-		res = src - prtd->dma_start;
-
-	spin_unlock(&prtd->lock);
-
-	pr_debug("Pointer %x %x\n", src, dst);
-
-	/* we seem to be getting the odd error from the pcm library due
-	 * to out-of-bounds pointers. this is maybe due to the dma engine
-	 * not having loaded the new values for the channel before being
-	 * callled... (todo - fix )
-	 */
-
-	if (res >= snd_pcm_lib_buffer_bytes(substream)) {
-		if (res == snd_pcm_lib_buffer_bytes(substream))
-			res = 0;
-	}
-
-	return bytes_to_frames(substream->runtime, res);
-}
-
-static int dma_open(struct snd_pcm_substream *substream)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct runtime_data *prtd;
-
-	pr_debug("Entered %s\n", __func__);
-
-	snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
-	snd_soc_set_runtime_hwparams(substream, &dma_hardware);
-
-	prtd = kzalloc(sizeof(struct runtime_data), GFP_KERNEL);
-	if (prtd == NULL)
-		return -ENOMEM;
-
-	spin_lock_init(&prtd->lock);
-
-	runtime->private_data = prtd;
-	return 0;
-}
-
-static int dma_close(struct snd_pcm_substream *substream)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct runtime_data *prtd = runtime->private_data;
-
-	pr_debug("Entered %s\n", __func__);
-
-	if (!prtd)
-		pr_debug("dma_close called with prtd == NULL\n");
-
-	kfree(prtd);
-
-	return 0;
-}
-
-static int dma_mmap(struct snd_pcm_substream *substream,
-	struct vm_area_struct *vma)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-
-	pr_debug("Entered %s\n", __func__);
-
-	return dma_mmap_writecombine(substream->pcm->card->dev, vma,
-				     runtime->dma_area,
-				     runtime->dma_addr,
-				     runtime->dma_bytes);
-}
-
-static struct snd_pcm_ops dma_ops = {
-	.open		= dma_open,
-	.close		= dma_close,
-	.ioctl		= snd_pcm_lib_ioctl,
-	.hw_params	= dma_hw_params,
-	.hw_free	= dma_hw_free,
-	.prepare	= dma_prepare,
-	.trigger	= dma_trigger,
-	.pointer	= dma_pointer,
-	.mmap		= dma_mmap,
-};
-
-static int preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
-{
-	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
-	struct snd_dma_buffer *buf = &substream->dma_buffer;
-	size_t size = dma_hardware.buffer_bytes_max;
-
-	pr_debug("Entered %s\n", __func__);
-
-	buf->dev.type = SNDRV_DMA_TYPE_DEV;
-	buf->dev.dev = pcm->card->dev;
-	buf->private_data = NULL;
-	buf->area = dma_alloc_writecombine(pcm->card->dev, size,
-					   &buf->addr, GFP_KERNEL);
-	if (!buf->area)
-		return -ENOMEM;
-	buf->bytes = size;
-	return 0;
-}
-
-static void dma_free_dma_buffers(struct snd_pcm *pcm)
-{
-	struct snd_pcm_substream *substream;
-	struct snd_dma_buffer *buf;
-	int stream;
-
-	pr_debug("Entered %s\n", __func__);
-
-	for (stream = 0; stream < 2; stream++) {
-		substream = pcm->streams[stream].substream;
-		if (!substream)
-			continue;
-
-		buf = &substream->dma_buffer;
-		if (!buf->area)
-			continue;
-
-		dma_free_writecombine(pcm->card->dev, buf->bytes,
-				      buf->area, buf->addr);
-		buf->area = NULL;
-	}
-}
-
-static u64 dma_mask = DMA_BIT_MASK(32);
-
-static int dma_new(struct snd_card *card,
-	struct snd_soc_dai *dai, struct snd_pcm *pcm)
-{
-	int ret = 0;
-
-	pr_debug("Entered %s\n", __func__);
-
-	if (!card->dev->dma_mask)
-		card->dev->dma_mask = &dma_mask;
-	if (!card->dev->coherent_dma_mask)
-		card->dev->coherent_dma_mask = 0xffffffff;
-
-	if (dai->driver->playback.channels_min) {
-		ret = preallocate_dma_buffer(pcm,
-			SNDRV_PCM_STREAM_PLAYBACK);
-		if (ret)
-			goto out;
-	}
-
-	if (dai->driver->capture.channels_min) {
-		ret = preallocate_dma_buffer(pcm,
-			SNDRV_PCM_STREAM_CAPTURE);
-		if (ret)
-			goto out;
-	}
-out:
-	return ret;
-}
-
-static struct snd_soc_platform_driver samsung_asoc_platform = {
-	.ops		= &dma_ops,
-	.pcm_new	= dma_new,
-	.pcm_free	= dma_free_dma_buffers,
-};
-
-static int __devinit samsung_asoc_platform_probe(struct platform_device *pdev)
-{
-	return snd_soc_register_platform(&pdev->dev, &samsung_asoc_platform);
-}
-
-static int __devexit samsung_asoc_platform_remove(struct platform_device *pdev)
-{
-	snd_soc_unregister_platform(&pdev->dev);
-	return 0;
-}
-
-static struct platform_driver asoc_dma_driver = {
-	.driver = {
-		.name = "samsung-audio",
-		.owner = THIS_MODULE,
-	},
-
-	.probe = samsung_asoc_platform_probe,
-	.remove = __devexit_p(samsung_asoc_platform_remove),
-};
-
-static int __init samsung_asoc_init(void)
-{
-	return platform_driver_register(&asoc_dma_driver);
-}
-module_init(samsung_asoc_init);
-
-static void __exit samsung_asoc_exit(void)
-{
-	platform_driver_unregister(&asoc_dma_driver);
-}
-module_exit(samsung_asoc_exit);
-
-MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("Samsung ASoC DMA Driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:samsung-audio");
diff --git a/sound/soc/s3c24xx/dma.h b/sound/soc/s3c24xx/dma.h
deleted file mode 100644
index f8cd2b4..0000000
--- a/sound/soc/s3c24xx/dma.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  dma.h --
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  ALSA PCM interface for the Samsung S3C24xx CPU
- */
-
-#ifndef _S3C_AUDIO_H
-#define _S3C_AUDIO_H
-
-#define ST_RUNNING		(1<<0)
-#define ST_OPENED		(1<<1)
-
-struct s3c_dma_params {
-	struct s3c2410_dma_client *client;	/* stream identifier */
-	int channel;				/* Channel ID */
-	dma_addr_t dma_addr;
-	int dma_size;			/* Size of the DMA transfer */
-};
-
-#define S3C24XX_DAI_I2S			0
-
-/* platform data */
-extern struct snd_ac97_bus_ops s3c24xx_ac97_ops;
-
-#endif
diff --git a/sound/soc/s3c24xx/goni_wm8994.c b/sound/soc/s3c24xx/goni_wm8994.c
deleted file mode 100644
index dcaf7c3..0000000
--- a/sound/soc/s3c24xx/goni_wm8994.c
+++ /dev/null
@@ -1,309 +0,0 @@
-/*
- * goni_wm8994.c
- *
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
- * Author: Chanwoo Choi <cw00.choi@samsung.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <sound/soc.h>
-#include <sound/soc-dapm.h>
-#include <sound/jack.h>
-#include <asm/mach-types.h>
-#include <mach/gpio.h>
-#include <mach/regs-clock.h>
-
-#include <linux/mfd/wm8994/core.h>
-#include <linux/mfd/wm8994/registers.h>
-#include "../codecs/wm8994.h"
-#include "dma.h"
-#include "i2s.h"
-
-#define MACHINE_NAME	0
-#define CPU_VOICE_DAI	1
-
-static const char *aquila_str[] = {
-	[MACHINE_NAME] = "aquila",
-	[CPU_VOICE_DAI] = "aquila-voice-dai",
-};
-
-static struct snd_soc_card goni;
-static struct platform_device *goni_snd_device;
-
-/* 3.5 pie jack */
-static struct snd_soc_jack jack;
-
-/* 3.5 pie jack detection DAPM pins */
-static struct snd_soc_jack_pin jack_pins[] = {
-	{
-		.pin = "Headset Mic",
-		.mask = SND_JACK_MICROPHONE,
-	}, {
-		.pin = "Headset Stereophone",
-		.mask = SND_JACK_HEADPHONE | SND_JACK_MECHANICAL |
-			SND_JACK_AVOUT,
-	},
-};
-
-/* 3.5 pie jack detection gpios */
-static struct snd_soc_jack_gpio jack_gpios[] = {
-	{
-		.gpio = S5PV210_GPH0(6),
-		.name = "DET_3.5",
-		.report = SND_JACK_HEADSET | SND_JACK_MECHANICAL |
-			SND_JACK_AVOUT,
-		.debounce_time = 200,
-	},
-};
-
-static const struct snd_soc_dapm_widget goni_dapm_widgets[] = {
-	SND_SOC_DAPM_SPK("Ext Left Spk", NULL),
-	SND_SOC_DAPM_SPK("Ext Right Spk", NULL),
-	SND_SOC_DAPM_SPK("Ext Rcv", NULL),
-	SND_SOC_DAPM_HP("Headset Stereophone", NULL),
-	SND_SOC_DAPM_MIC("Headset Mic", NULL),
-	SND_SOC_DAPM_MIC("Main Mic", NULL),
-	SND_SOC_DAPM_MIC("2nd Mic", NULL),
-	SND_SOC_DAPM_LINE("Radio In", NULL),
-};
-
-static const struct snd_soc_dapm_route goni_dapm_routes[] = {
-	{"Ext Left Spk", NULL, "SPKOUTLP"},
-	{"Ext Left Spk", NULL, "SPKOUTLN"},
-
-	{"Ext Right Spk", NULL, "SPKOUTRP"},
-	{"Ext Right Spk", NULL, "SPKOUTRN"},
-
-	{"Ext Rcv", NULL, "HPOUT2N"},
-	{"Ext Rcv", NULL, "HPOUT2P"},
-
-	{"Headset Stereophone", NULL, "HPOUT1L"},
-	{"Headset Stereophone", NULL, "HPOUT1R"},
-
-	{"IN1RN", NULL, "Headset Mic"},
-	{"IN1RP", NULL, "Headset Mic"},
-
-	{"IN1RN", NULL, "2nd Mic"},
-	{"IN1RP", NULL, "2nd Mic"},
-
-	{"IN1LN", NULL, "Main Mic"},
-	{"IN1LP", NULL, "Main Mic"},
-
-	{"IN2LN", NULL, "Radio In"},
-	{"IN2RN", NULL, "Radio In"},
-};
-
-static int goni_wm8994_init(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_soc_codec *codec = rtd->codec;
-	int ret;
-
-	/* add goni specific widgets */
-	snd_soc_dapm_new_controls(codec, goni_dapm_widgets,
-			ARRAY_SIZE(goni_dapm_widgets));
-
-	/* set up goni specific audio routes */
-	snd_soc_dapm_add_routes(codec, goni_dapm_routes,
-			ARRAY_SIZE(goni_dapm_routes));
-
-	/* set endpoints to not connected */
-	snd_soc_dapm_nc_pin(codec, "IN2LP:VXRN");
-	snd_soc_dapm_nc_pin(codec, "IN2RP:VXRP");
-	snd_soc_dapm_nc_pin(codec, "LINEOUT1N");
-	snd_soc_dapm_nc_pin(codec, "LINEOUT1P");
-	snd_soc_dapm_nc_pin(codec, "LINEOUT2N");
-	snd_soc_dapm_nc_pin(codec, "LINEOUT2P");
-
-	if (machine_is_aquila()) {
-		snd_soc_dapm_nc_pin(codec, "SPKOUTRN");
-		snd_soc_dapm_nc_pin(codec, "SPKOUTRP");
-	}
-
-	snd_soc_dapm_sync(codec);
-
-	/* Headset jack detection */
-	ret = snd_soc_jack_new(&goni, "Headset Jack",
-			SND_JACK_HEADSET | SND_JACK_MECHANICAL | SND_JACK_AVOUT,
-			&jack);
-	if (ret)
-		return ret;
-
-	ret = snd_soc_jack_add_pins(&jack, ARRAY_SIZE(jack_pins), jack_pins);
-	if (ret)
-		return ret;
-
-	ret = snd_soc_jack_add_gpios(&jack, ARRAY_SIZE(jack_gpios), jack_gpios);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static int goni_hifi_hw_params(struct snd_pcm_substream *substream,
-		struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	unsigned int pll_out = 24000000;
-	int ret = 0;
-
-	/* set the cpu DAI configuration */
-	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
-			SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
-	if (ret < 0)
-		return ret;
-
-	/* set codec DAI configuration */
-	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
-			SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
-	if (ret < 0)
-		return ret;
-
-	/* set the codec FLL */
-	ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL1, 0, pll_out,
-			params_rate(params) * 256);
-	if (ret < 0)
-		return ret;
-
-	/* set the codec system clock */
-	ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL1,
-			params_rate(params) * 256, SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static struct snd_soc_ops goni_hifi_ops = {
-	.hw_params = goni_hifi_hw_params,
-};
-
-static int goni_voice_hw_params(struct snd_pcm_substream *substream,
-		struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	unsigned int pll_out = 24000000;
-	int ret = 0;
-
-	if (params_rate(params) != 8000)
-		return -EINVAL;
-
-	/* set codec DAI configuration */
-	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_LEFT_J |
-			SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM);
-	if (ret < 0)
-		return ret;
-
-	/* set the codec FLL */
-	ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL2, 0, pll_out,
-			params_rate(params) * 256);
-	if (ret < 0)
-		return ret;
-
-	/* set the codec system clock */
-	ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL2,
-			params_rate(params) * 256, SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static struct snd_soc_dai_driver voice_dai = {
-	.name = "goni-voice-dai",
-	.id = 0,
-	.playback = {
-		.channels_min = 1,
-		.channels_max = 2,
-		.rates = SNDRV_PCM_RATE_8000,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
-	.capture = {
-		.channels_min = 1,
-		.channels_max = 2,
-		.rates = SNDRV_PCM_RATE_8000,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
-};
-
-static struct snd_soc_ops goni_voice_ops = {
-	.hw_params = goni_voice_hw_params,
-};
-
-static struct snd_soc_dai_link goni_dai[] = {
-{
-	.name = "WM8994",
-	.stream_name = "WM8994 HiFi",
-	.cpu_dai_name = "samsung-i2s.0",
-	.codec_dai_name = "wm8994-hifi",
-	.platform_name = "samsung-audio",
-	.codec_name = "wm8994-codec.0-0x1a",
-	.init = goni_wm8994_init,
-	.ops = &goni_hifi_ops,
-}, {
-	.name = "WM8994 Voice",
-	.stream_name = "Voice",
-	.cpu_dai_name = "goni-voice-dai",
-	.codec_dai_name = "wm8994-voice",
-	.platform_name = "samsung-audio",
-	.codec_name = "wm8994-codec.0-0x1a",
-	.ops = &goni_voice_ops,
-},
-};
-
-static struct snd_soc_card goni = {
-	.name = "goni",
-	.dai_link = goni_dai,
-	.num_links = ARRAY_SIZE(goni_dai),
-};
-
-static int __init goni_init(void)
-{
-	int ret;
-
-	if (machine_is_aquila()) {
-		voice_dai.name = aquila_str[CPU_VOICE_DAI];
-		goni_dai[1].cpu_dai_name = aquila_str[CPU_VOICE_DAI];
-		goni.name = aquila_str[MACHINE_NAME];
-	} else if (!machine_is_goni())
-		return -ENODEV;
-
-	goni_snd_device = platform_device_alloc("soc-audio", -1);
-	if (!goni_snd_device)
-		return -ENOMEM;
-
-	/* register voice DAI here */
-	ret = snd_soc_register_dai(&goni_snd_device->dev, &voice_dai);
-	if (ret)
-		return ret;
-
-	platform_set_drvdata(goni_snd_device, &goni);
-	ret = platform_device_add(goni_snd_device);
-
-	if (ret)
-		platform_device_put(goni_snd_device);
-
-	return ret;
-}
-
-static void __exit goni_exit(void)
-{
-	platform_device_unregister(goni_snd_device);
-}
-
-module_init(goni_init);
-module_exit(goni_exit);
-
-/* Module information */
-MODULE_DESCRIPTION("ALSA SoC WM8994 GONI(S5PV210)");
-MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/i2s.c b/sound/soc/s3c24xx/i2s.c
deleted file mode 100644
index 6869f51..0000000
--- a/sound/soc/s3c24xx/i2s.c
+++ /dev/null
@@ -1,1251 +0,0 @@
-/* sound/soc/s3c24xx/i2s.c
- *
- * ALSA SoC Audio Layer - Samsung I2S Controller driver
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-
-#include <plat/audio.h>
-
-#include "dma.h"
-#include "i2s.h"
-
-#define I2SCON		0x0
-#define I2SMOD		0x4
-#define I2SFIC		0x8
-#define I2SPSR		0xc
-#define I2STXD		0x10
-#define I2SRXD		0x14
-#define I2SFICS		0x18
-#define I2STXDS		0x1c
-
-#define CON_RSTCLR		(1 << 31)
-#define CON_FRXOFSTATUS		(1 << 26)
-#define CON_FRXORINTEN		(1 << 25)
-#define CON_FTXSURSTAT		(1 << 24)
-#define CON_FTXSURINTEN		(1 << 23)
-#define CON_TXSDMA_PAUSE	(1 << 20)
-#define CON_TXSDMA_ACTIVE	(1 << 18)
-
-#define CON_FTXURSTATUS		(1 << 17)
-#define CON_FTXURINTEN		(1 << 16)
-#define CON_TXFIFO2_EMPTY	(1 << 15)
-#define CON_TXFIFO1_EMPTY	(1 << 14)
-#define CON_TXFIFO2_FULL	(1 << 13)
-#define CON_TXFIFO1_FULL	(1 << 12)
-
-#define CON_LRINDEX		(1 << 11)
-#define CON_TXFIFO_EMPTY	(1 << 10)
-#define CON_RXFIFO_EMPTY	(1 << 9)
-#define CON_TXFIFO_FULL		(1 << 8)
-#define CON_RXFIFO_FULL		(1 << 7)
-#define CON_TXDMA_PAUSE		(1 << 6)
-#define CON_RXDMA_PAUSE		(1 << 5)
-#define CON_TXCH_PAUSE		(1 << 4)
-#define CON_RXCH_PAUSE		(1 << 3)
-#define CON_TXDMA_ACTIVE	(1 << 2)
-#define CON_RXDMA_ACTIVE	(1 << 1)
-#define CON_ACTIVE		(1 << 0)
-
-#define MOD_OPCLK_CDCLK_OUT	(0 << 30)
-#define MOD_OPCLK_CDCLK_IN	(1 << 30)
-#define MOD_OPCLK_BCLK_OUT	(2 << 30)
-#define MOD_OPCLK_PCLK		(3 << 30)
-#define MOD_OPCLK_MASK		(3 << 30)
-#define MOD_TXS_IDMA		(1 << 28) /* Sec_TXFIFO use I-DMA */
-
-#define MOD_BLCS_SHIFT	26
-#define MOD_BLCS_16BIT	(0 << MOD_BLCS_SHIFT)
-#define MOD_BLCS_8BIT	(1 << MOD_BLCS_SHIFT)
-#define MOD_BLCS_24BIT	(2 << MOD_BLCS_SHIFT)
-#define MOD_BLCS_MASK	(3 << MOD_BLCS_SHIFT)
-#define MOD_BLCP_SHIFT	24
-#define MOD_BLCP_16BIT	(0 << MOD_BLCP_SHIFT)
-#define MOD_BLCP_8BIT	(1 << MOD_BLCP_SHIFT)
-#define MOD_BLCP_24BIT	(2 << MOD_BLCP_SHIFT)
-#define MOD_BLCP_MASK	(3 << MOD_BLCP_SHIFT)
-
-#define MOD_C2DD_HHALF		(1 << 21) /* Discard Higher-half */
-#define MOD_C2DD_LHALF		(1 << 20) /* Discard Lower-half */
-#define MOD_C1DD_HHALF		(1 << 19)
-#define MOD_C1DD_LHALF		(1 << 18)
-#define MOD_DC2_EN		(1 << 17)
-#define MOD_DC1_EN		(1 << 16)
-#define MOD_BLC_16BIT		(0 << 13)
-#define MOD_BLC_8BIT		(1 << 13)
-#define MOD_BLC_24BIT		(2 << 13)
-#define MOD_BLC_MASK		(3 << 13)
-
-#define MOD_IMS_SYSMUX		(1 << 10)
-#define MOD_SLAVE		(1 << 11)
-#define MOD_TXONLY		(0 << 8)
-#define MOD_RXONLY		(1 << 8)
-#define MOD_TXRX		(2 << 8)
-#define MOD_MASK		(3 << 8)
-#define MOD_LR_LLOW		(0 << 7)
-#define MOD_LR_RLOW		(1 << 7)
-#define MOD_SDF_IIS		(0 << 5)
-#define MOD_SDF_MSB		(1 << 5)
-#define MOD_SDF_LSB		(2 << 5)
-#define MOD_SDF_MASK		(3 << 5)
-#define MOD_RCLK_256FS		(0 << 3)
-#define MOD_RCLK_512FS		(1 << 3)
-#define MOD_RCLK_384FS		(2 << 3)
-#define MOD_RCLK_768FS		(3 << 3)
-#define MOD_RCLK_MASK		(3 << 3)
-#define MOD_BCLK_32FS		(0 << 1)
-#define MOD_BCLK_48FS		(1 << 1)
-#define MOD_BCLK_16FS		(2 << 1)
-#define MOD_BCLK_24FS		(3 << 1)
-#define MOD_BCLK_MASK		(3 << 1)
-#define MOD_8BIT		(1 << 0)
-
-#define MOD_CDCLKCON		(1 << 12)
-
-#define PSR_PSREN		(1 << 15)
-
-#define FIC_TX2COUNT(x)		(((x) >>  24) & 0xf)
-#define FIC_TX1COUNT(x)		(((x) >>  16) & 0xf)
-
-#define FIC_TXFLUSH		(1 << 15)
-#define FIC_RXFLUSH		(1 << 7)
-#define FIC_TXCOUNT(x)		(((x) >>  8) & 0xf)
-#define FIC_RXCOUNT(x)		(((x) >>  0) & 0xf)
-#define FICS_TXCOUNT(x)		(((x) >>  8) & 0x7f)
-
-#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
-
-struct i2s_dai {
-	/* Platform device for this DAI */
-	struct platform_device *pdev;
-	/* IOREMAP'd SFRs */
-	void __iomem	*addr;
-	/* Physical base address of SFRs */
-	u32	base;
-	/* Rate of RCLK source clock */
-	unsigned long rclk_srcrate;
-	/* Frame Clock */
-	unsigned frmclk;
-	/*
-	 * Specifically requested RCLK,BCLK by MACHINE Driver.
-	 * 0 indicates CPU driver is free to choose any value.
-	 */
-	unsigned rfs, bfs;
-	/* I2S Controller's core clock */
-	struct clk *clk;
-	/* Clock for generating I2S signals */
-	struct clk *op_clk;
-	/* Array of clock names for op_clk */
-	const char **src_clk;
-	/* Pointer to the Primary_Fifo if this is Sec_Fifo, NULL otherwise */
-	struct i2s_dai *pri_dai;
-	/* Pointer to the Secondary_Fifo if it has one, NULL otherwise */
-	struct i2s_dai *sec_dai;
-#define DAI_OPENED	(1 << 0) /* Dai is opened */
-#define DAI_MANAGER	(1 << 1) /* Dai is the manager */
-	unsigned mode;
-	/* Driver for this DAI */
-	struct snd_soc_dai_driver s3c_i2s_drv;
-	/* DMA parameters */
-	struct s3c_dma_params dma_playback;
-	struct s3c_dma_params dma_capture;
-	u32	quirks;
-	u32	suspend_i2smod;
-	u32	suspend_i2scon;
-	u32	suspend_i2spsr;
-};
-
-/* Lock for cross i/f checks */
-static DEFINE_SPINLOCK(lock);
-
-/* If this is the 'overlay' stereo DAI */
-static inline bool is_secondary(struct i2s_dai *i2s)
-{
-	return i2s->pri_dai ? true : false;
-}
-
-/* If operating in SoC-Slave mode */
-static inline bool is_slave(struct i2s_dai *i2s)
-{
-	return (readl(i2s->addr + I2SMOD) & MOD_SLAVE) ? true : false;
-}
-
-/* If this interface of the controller is transmitting data */
-static inline bool tx_active(struct i2s_dai *i2s)
-{
-	u32 active;
-
-	if (!i2s)
-		return false;
-
-	active = readl(i2s->addr + I2SMOD);
-
-	if (is_secondary(i2s))
-		active &= CON_TXSDMA_ACTIVE;
-	else
-		active &= CON_TXDMA_ACTIVE;
-
-	return active ? true : false;
-}
-
-/* If the other interface of the controller is transmitting data */
-static inline bool other_tx_active(struct i2s_dai *i2s)
-{
-	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
-
-	return tx_active(other);
-}
-
-/* If any interface of the controller is transmitting data */
-static inline bool any_tx_active(struct i2s_dai *i2s)
-{
-	return tx_active(i2s) || other_tx_active(i2s);
-}
-
-/* If this interface of the controller is receiving data */
-static inline bool rx_active(struct i2s_dai *i2s)
-{
-	u32 active;
-
-	if (!i2s)
-		return false;
-
-	active = readl(i2s->addr + I2SMOD) & CON_RXDMA_ACTIVE;
-
-	return active ? true : false;
-}
-
-/* If the other interface of the controller is receiving data */
-static inline bool other_rx_active(struct i2s_dai *i2s)
-{
-	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
-
-	return rx_active(other);
-}
-
-/* If any interface of the controller is receiving data */
-static inline bool any_rx_active(struct i2s_dai *i2s)
-{
-	return rx_active(i2s) || other_rx_active(i2s);
-}
-
-/* If the other DAI is transmitting or receiving data */
-static inline bool other_active(struct i2s_dai *i2s)
-{
-	return other_rx_active(i2s) || other_tx_active(i2s);
-}
-
-/* If this DAI is transmitting or receiving data */
-static inline bool this_active(struct i2s_dai *i2s)
-{
-	return tx_active(i2s) || rx_active(i2s);
-}
-
-/* If the controller is active anyway */
-static inline bool any_active(struct i2s_dai *i2s)
-{
-	return this_active(i2s) || other_active(i2s);
-}
-
-static inline struct i2s_dai *to_info(struct snd_soc_dai *dai)
-{
-	return snd_soc_dai_get_drvdata(dai);
-}
-
-static inline bool is_opened(struct i2s_dai *i2s)
-{
-	if (i2s && (i2s->mode & DAI_OPENED))
-		return true;
-	else
-		return false;
-}
-
-static inline bool is_manager(struct i2s_dai *i2s)
-{
-	if (is_opened(i2s) && (i2s->mode & DAI_MANAGER))
-		return true;
-	else
-		return false;
-}
-
-/* Read RCLK of I2S (in multiples of LRCLK) */
-static inline unsigned get_rfs(struct i2s_dai *i2s)
-{
-	u32 rfs = (readl(i2s->addr + I2SMOD) >> 3) & 0x3;
-
-	switch (rfs) {
-	case 3:	return 768;
-	case 2: return 384;
-	case 1:	return 512;
-	default: return 256;
-	}
-}
-
-/* Write RCLK of I2S (in multiples of LRCLK) */
-static inline void set_rfs(struct i2s_dai *i2s, unsigned rfs)
-{
-	u32 mod = readl(i2s->addr + I2SMOD);
-
-	mod &= ~MOD_RCLK_MASK;
-
-	switch (rfs) {
-	case 768:
-		mod |= MOD_RCLK_768FS;
-		break;
-	case 512:
-		mod |= MOD_RCLK_512FS;
-		break;
-	case 384:
-		mod |= MOD_RCLK_384FS;
-		break;
-	default:
-		mod |= MOD_RCLK_256FS;
-		break;
-	}
-
-	writel(mod, i2s->addr + I2SMOD);
-}
-
-/* Read Bit-Clock of I2S (in multiples of LRCLK) */
-static inline unsigned get_bfs(struct i2s_dai *i2s)
-{
-	u32 bfs = (readl(i2s->addr + I2SMOD) >> 1) & 0x3;
-
-	switch (bfs) {
-	case 3: return 24;
-	case 2: return 16;
-	case 1:	return 48;
-	default: return 32;
-	}
-}
-
-/* Write Bit-Clock of I2S (in multiples of LRCLK) */
-static inline void set_bfs(struct i2s_dai *i2s, unsigned bfs)
-{
-	u32 mod = readl(i2s->addr + I2SMOD);
-
-	mod &= ~MOD_BCLK_MASK;
-
-	switch (bfs) {
-	case 48:
-		mod |= MOD_BCLK_48FS;
-		break;
-	case 32:
-		mod |= MOD_BCLK_32FS;
-		break;
-	case 24:
-		mod |= MOD_BCLK_24FS;
-		break;
-	default:
-		mod |= MOD_BCLK_16FS;
-		break;
-	}
-
-	writel(mod, i2s->addr + I2SMOD);
-}
-
-/* Sample-Size */
-static inline int get_blc(struct i2s_dai *i2s)
-{
-	int blc = readl(i2s->addr + I2SMOD);
-
-	blc = (blc >> 13) & 0x3;
-
-	switch (blc) {
-	case 2: return 24;
-	case 1:	return 8;
-	default: return 16;
-	}
-}
-
-/* TX Channel Control */
-static void s3c_i2sv2_txctrl(struct i2s_dai *i2s, int on)
-{
-	void __iomem *addr = i2s->addr;
-	u32 con = readl(addr + I2SCON);
-	u32 mod = readl(addr + I2SMOD) & ~MOD_MASK;
-
-	if (on) {
-		con |= CON_ACTIVE;
-		con &= ~CON_TXCH_PAUSE;
-
-		if (is_secondary(i2s)) {
-			con |= CON_TXSDMA_ACTIVE;
-			con &= ~CON_TXSDMA_PAUSE;
-		} else {
-			con |= CON_TXDMA_ACTIVE;
-			con &= ~CON_TXDMA_PAUSE;
-		}
-
-		if (any_rx_active(i2s))
-			mod |= MOD_TXRX;
-		else
-			mod |= MOD_TXONLY;
-	} else {
-		if (is_secondary(i2s)) {
-			con |=  CON_TXSDMA_PAUSE;
-			con &= ~CON_TXSDMA_ACTIVE;
-		} else {
-			con |=  CON_TXDMA_PAUSE;
-			con &= ~CON_TXDMA_ACTIVE;
-		}
-
-		if (other_tx_active(i2s)) {
-			writel(con, addr + I2SCON);
-			return;
-		}
-
-		con |=  CON_TXCH_PAUSE;
-
-		if (any_rx_active(i2s))
-			mod |= MOD_RXONLY;
-		else
-			con &= ~CON_ACTIVE;
-	}
-
-	writel(mod, addr + I2SMOD);
-	writel(con, addr + I2SCON);
-}
-
-/* RX Channel Control */
-static void s3c_i2sv2_rxctrl(struct i2s_dai *i2s, int on)
-{
-	void __iomem *addr = i2s->addr;
-	u32 con = readl(addr + I2SCON);
-	u32 mod = readl(addr + I2SMOD) & ~MOD_MASK;
-
-	if (on) {
-		con |= CON_RXDMA_ACTIVE | CON_ACTIVE;
-		con &= ~(CON_RXDMA_PAUSE | CON_RXCH_PAUSE);
-
-		if (any_tx_active(i2s))
-			mod |= MOD_TXRX;
-		else
-			mod |= MOD_RXONLY;
-	} else {
-		con |=  CON_RXDMA_PAUSE | CON_RXCH_PAUSE;
-		con &= ~CON_RXDMA_ACTIVE;
-
-		if (any_tx_active(i2s))
-			mod |= MOD_TXONLY;
-		else
-			con &= ~CON_ACTIVE;
-	}
-
-	writel(mod, addr + I2SMOD);
-	writel(con, addr + I2SCON);
-}
-
-/* Flush FIFO of an interface */
-static inline void s3c_i2sv2_fifo(struct i2s_dai *i2s, u32 flush)
-{
-	void __iomem *fic;
-	u32 val;
-
-	if (!i2s)
-		return;
-
-	if (is_secondary(i2s))
-		fic = i2s->addr + I2SFICS;
-	else
-		fic = i2s->addr + I2SFIC;
-
-	/* Flush the FIFO */
-	writel(readl(fic) | flush, fic);
-
-	/* Be patient */
-	val = msecs_to_loops(1) / 1000; /* 1 usec */
-	while (--val)
-		cpu_relax();
-
-	writel(readl(fic) & ~flush, fic);
-}
-
-static int s3c_i2sv2_set_sysclk(struct snd_soc_dai *dai,
-	  int clk_id, unsigned int rfs, int dir)
-{
-	struct i2s_dai *i2s = to_info(dai);
-	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
-	u32 mod = readl(i2s->addr + I2SMOD);
-
-	switch (clk_id) {
-	case SAMSUNG_I2S_CDCLK:
-		/* Shouldn't matter in GATING(CLOCK_IN) mode */
-		if (dir == SND_SOC_CLOCK_IN)
-			rfs = 0;
-
-		if ((rfs && other->rfs && (other->rfs != rfs)) ||
-				(any_active(i2s) &&
-				(((dir == SND_SOC_CLOCK_IN)
-					&& !(mod & MOD_CDCLKCON)) ||
-				((dir == SND_SOC_CLOCK_OUT)
-					&& (mod & MOD_CDCLKCON))))) {
-			dev_err(&i2s->pdev->dev,
-				"%s:%d Other DAI busy\n", __func__, __LINE__);
-			return -EAGAIN;
-		}
-
-		if (dir == SND_SOC_CLOCK_IN)
-			mod |= MOD_CDCLKCON;
-		else
-			mod &= ~MOD_CDCLKCON;
-
-		i2s->rfs = rfs;
-		break;
-
-	case SAMSUNG_I2S_RCLKSRC_0: /* clock corrsponding to IISMOD[10] := 0 */
-	case SAMSUNG_I2S_RCLKSRC_1: /* clock corrsponding to IISMOD[10] := 1 */
-		if ((i2s->quirks & QUIRK_NO_MUXPSR)
-				|| (clk_id == SAMSUNG_I2S_RCLKSRC_0))
-			clk_id = 0;
-		else
-			clk_id = 1;
-
-		if (!any_active(i2s)) {
-			if (i2s->op_clk) {
-				if ((clk_id && !(mod & MOD_IMS_SYSMUX)) ||
-					(!clk_id && (mod & MOD_IMS_SYSMUX))) {
-					clk_disable(i2s->op_clk);
-					clk_put(i2s->op_clk);
-				} else {
-					return 0;
-				}
-			}
-
-			i2s->op_clk = clk_get(&i2s->pdev->dev,
-						i2s->src_clk[clk_id]);
-			clk_enable(i2s->op_clk);
-			i2s->rclk_srcrate = clk_get_rate(i2s->op_clk);
-
-			/* Over-ride the other's */
-			if (other) {
-				other->op_clk = i2s->op_clk;
-				other->rclk_srcrate = i2s->rclk_srcrate;
-			}
-		} else if ((!clk_id && (mod & MOD_IMS_SYSMUX))
-				|| (clk_id && !(mod & MOD_IMS_SYSMUX))) {
-			dev_err(&i2s->pdev->dev,
-				"%s:%d Other DAI busy\n", __func__, __LINE__);
-			return -EAGAIN;
-		} else {
-			/* Call can't be on the active DAI */
-			i2s->op_clk = other->op_clk;
-			i2s->rclk_srcrate = other->rclk_srcrate;
-			return 0;
-		}
-
-		if (clk_id == 0)
-			mod &= ~MOD_IMS_SYSMUX;
-		else
-			mod |= MOD_IMS_SYSMUX;
-		break;
-
-	default:
-		dev_err(&i2s->pdev->dev, "We don't serve that!\n");
-		return -EINVAL;
-	}
-
-	writel(mod, i2s->addr + I2SMOD);
-
-	return 0;
-}
-
-static int i2sv2_i2s_set_fmt(struct snd_soc_dai *dai,
-	unsigned int fmt)
-{
-	struct i2s_dai *i2s = to_info(dai);
-	u32 mod = readl(i2s->addr + I2SMOD);
-	u32 tmp = 0;
-
-	/* Format is priority */
-	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
-	case SND_SOC_DAIFMT_RIGHT_J:
-		tmp |= MOD_LR_RLOW;
-		tmp |= MOD_SDF_MSB;
-		break;
-	case SND_SOC_DAIFMT_LEFT_J:
-		tmp |= MOD_LR_RLOW;
-		tmp |= MOD_SDF_LSB;
-		break;
-	case SND_SOC_DAIFMT_I2S:
-		tmp |= MOD_SDF_IIS;
-		break;
-	default:
-		dev_err(&i2s->pdev->dev, "Format not supported\n");
-		return -EINVAL;
-	}
-
-	/* Allow LRCLK-inverted version of the supported formats */
-	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
-	case SND_SOC_DAIFMT_NB_NF:
-		break;
-	case SND_SOC_DAIFMT_NB_IF:
-		if (tmp & MOD_LR_RLOW)
-			tmp &= ~MOD_LR_RLOW;
-		else
-			tmp |= MOD_LR_RLOW;
-		break;
-	default:
-		dev_err(&i2s->pdev->dev, "Polarity not supported\n");
-		return -EINVAL;
-	}
-
-	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
-	case SND_SOC_DAIFMT_CBM_CFM:
-		tmp |= MOD_SLAVE;
-		break;
-	case SND_SOC_DAIFMT_CBS_CFS:
-		/* Set default source clock in Master mode */
-		if (i2s->rclk_srcrate == 0)
-			s3c_i2sv2_set_sysclk(dai, SAMSUNG_I2S_RCLKSRC_0,
-							0, SND_SOC_CLOCK_IN);
-		break;
-	default:
-		dev_err(&i2s->pdev->dev, "master/slave format not supported\n");
-		return -EINVAL;
-	}
-
-	if (any_active(i2s) &&
-			((mod & (MOD_SDF_MASK | MOD_LR_RLOW
-				| MOD_SLAVE)) != tmp)) {
-		dev_err(&i2s->pdev->dev,
-				"%s:%d Other DAI busy\n", __func__, __LINE__);
-		return -EAGAIN;
-	}
-
-	mod &= ~(MOD_SDF_MASK | MOD_LR_RLOW | MOD_SLAVE);
-	mod |= tmp;
-	writel(mod, i2s->addr + I2SMOD);
-
-	return 0;
-}
-
-static int s3c_i2sv2_hw_params(struct snd_pcm_substream *substream,
-	struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
-{
-	struct i2s_dai *i2s = to_info(dai);
-	u32 mod = readl(i2s->addr + I2SMOD);
-
-	if (!is_secondary(i2s))
-		mod &= ~(MOD_DC2_EN | MOD_DC1_EN);
-
-	switch (params_channels(params)) {
-	case 6:
-		mod |= MOD_DC2_EN;
-	case 4:
-		mod |= MOD_DC1_EN;
-		break;
-	case 2:
-		break;
-	default:
-		dev_err(&i2s->pdev->dev, "%d channels not supported\n",
-				params_channels(params));
-		return -EINVAL;
-	}
-
-	if (is_secondary(i2s))
-		mod &= ~MOD_BLCS_MASK;
-	else
-		mod &= ~MOD_BLCP_MASK;
-
-	if (is_manager(i2s))
-		mod &= ~MOD_BLC_MASK;
-
-	switch (params_format(params)) {
-	case SNDRV_PCM_FORMAT_S8:
-		if (is_secondary(i2s))
-			mod |= MOD_BLCS_8BIT;
-		else
-			mod |= MOD_BLCP_8BIT;
-		if (is_manager(i2s))
-			mod |= MOD_BLC_8BIT;
-		break;
-	case SNDRV_PCM_FORMAT_S16_LE:
-		if (is_secondary(i2s))
-			mod |= MOD_BLCS_16BIT;
-		else
-			mod |= MOD_BLCP_16BIT;
-		if (is_manager(i2s))
-			mod |= MOD_BLC_16BIT;
-		break;
-	case SNDRV_PCM_FORMAT_S24_LE:
-		if (is_secondary(i2s))
-			mod |= MOD_BLCS_24BIT;
-		else
-			mod |= MOD_BLCP_24BIT;
-		if (is_manager(i2s))
-			mod |= MOD_BLC_24BIT;
-		break;
-	default:
-		dev_err(&i2s->pdev->dev, "Format(%d) not supported\n",
-				params_format(params));
-		return -EINVAL;
-	}
-	writel(mod, i2s->addr + I2SMOD);
-
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		snd_soc_dai_set_dma_data(dai, substream,
-			(void *)&i2s->dma_playback);
-	else
-		snd_soc_dai_set_dma_data(dai, substream,
-			(void *)&i2s->dma_capture);
-
-	i2s->frmclk = params_rate(params);
-
-	return 0;
-}
-
-/* We set constraints on the substream acc to the version of I2S */
-static int s3c_i2sv2_startup(struct snd_pcm_substream *substream,
-	  struct snd_soc_dai *dai)
-{
-	struct i2s_dai *i2s = to_info(dai);
-	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
-	unsigned long flags;
-
-	spin_lock_irqsave(&lock, flags);
-
-	i2s->mode |= DAI_OPENED;
-
-	if (is_manager(other))
-		i2s->mode &= ~DAI_MANAGER;
-	else
-		i2s->mode |= DAI_MANAGER;
-
-	/* Enforce set_sysclk in Master mode */
-	i2s->rclk_srcrate = 0;
-
-	spin_unlock_irqrestore(&lock, flags);
-
-	return 0;
-}
-
-static void s3c_i2sv2_shutdown(struct snd_pcm_substream *substream,
-	struct snd_soc_dai *dai)
-{
-	struct i2s_dai *i2s = to_info(dai);
-	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
-	unsigned long flags;
-
-	spin_lock_irqsave(&lock, flags);
-
-	i2s->mode &= ~DAI_OPENED;
-	i2s->mode &= ~DAI_MANAGER;
-
-	if (is_opened(other))
-		other->mode |= DAI_MANAGER;
-
-	/* Reset any constraint on RFS and BFS */
-	i2s->rfs = 0;
-	i2s->bfs = 0;
-
-	spin_unlock_irqrestore(&lock, flags);
-
-	/* Gate CDCLK by default */
-	if (!is_opened(other))
-		s3c_i2sv2_set_sysclk(dai, SAMSUNG_I2S_CDCLK,
-				0, SND_SOC_CLOCK_IN);
-}
-
-static int config_setup(struct i2s_dai *i2s)
-{
-	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
-	unsigned rfs, bfs, blc;
-	u32 psr;
-
-	blc = get_blc(i2s);
-
-	bfs = i2s->bfs;
-
-	if (!bfs && other)
-		bfs = other->bfs;
-
-	/* Select least possible multiple(2) if no constraint set */
-	if (!bfs)
-		bfs = blc * 2;
-
-	rfs = i2s->rfs;
-
-	if (!rfs && other)
-		rfs = other->rfs;
-
-	if ((rfs == 256 || rfs == 512) && (blc == 24)) {
-		dev_err(&i2s->pdev->dev,
-			"%d-RFS not supported for 24-blc\n", rfs);
-		return -EINVAL;
-	}
-
-	if (!rfs) {
-		if (bfs == 16 || bfs == 32)
-			rfs = 256;
-		else
-			rfs = 384;
-	}
-
-	/* If already setup and running */
-	if (any_active(i2s) && (get_rfs(i2s) != rfs || get_bfs(i2s) != bfs)) {
-		dev_err(&i2s->pdev->dev,
-				"%s:%d Other DAI busy\n", __func__, __LINE__);
-		return -EAGAIN;
-	}
-
-	/* We don't care about BFS in Slave mode */
-	if (is_slave(i2s))
-		return 0;
-
-	set_bfs(i2s, bfs);
-	set_rfs(i2s, rfs);
-
-	if (!(i2s->quirks & QUIRK_NO_MUXPSR)) {
-		psr = i2s->rclk_srcrate / i2s->frmclk / rfs;
-		writel(((psr - 1) << 8) | PSR_PSREN, i2s->addr + I2SPSR);
-		dev_dbg(&i2s->pdev->dev,
-			"RCLK_SRC=%luHz PSR=%u, RCLK=%dfs, BCLK=%dfs\n",
-				i2s->rclk_srcrate, psr, rfs, bfs);
-	}
-
-	return 0;
-}
-
-static int i2sv2_i2s_trigger(struct snd_pcm_substream *substream,
-	int cmd, struct snd_soc_dai *dai)
-{
-	int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct i2s_dai *i2s = to_info(rtd->cpu_dai);
-	unsigned long flags;
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-	case SNDRV_PCM_TRIGGER_RESUME:
-	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		local_irq_save(flags);
-
-		if (capture)
-			s3c_i2sv2_fifo(i2s, FIC_RXFLUSH);
-		else
-			s3c_i2sv2_fifo(i2s, FIC_TXFLUSH);
-
-		if (config_setup(i2s)) {
-			local_irq_restore(flags);
-			return -EINVAL;
-		}
-
-		if (capture)
-			s3c_i2sv2_rxctrl(i2s, 1);
-		else
-			s3c_i2sv2_txctrl(i2s, 1);
-
-		local_irq_restore(flags);
-		break;
-	case SNDRV_PCM_TRIGGER_STOP:
-	case SNDRV_PCM_TRIGGER_SUSPEND:
-	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		local_irq_save(flags);
-
-		if (capture)
-			s3c_i2sv2_rxctrl(i2s, 0);
-		else
-			s3c_i2sv2_txctrl(i2s, 0);
-
-		local_irq_restore(flags);
-		break;
-	}
-
-	return 0;
-}
-
-static int i2sv2_i2s_set_clkdiv(struct snd_soc_dai *dai,
-	int div_id, int div)
-{
-	struct i2s_dai *i2s = to_info(dai);
-	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
-
-	if (div_id == SAMSUNG_I2S_DIV_BCLK) {
-		if ((any_active(i2s) && div && (get_bfs(i2s) != div))
-			|| (other && other->bfs && (other->bfs != div))) {
-			dev_err(&i2s->pdev->dev,
-				"%s:%d Other DAI busy\n", __func__, __LINE__);
-			return -EAGAIN;
-		}
-		i2s->bfs = div;
-	} else {
-		dev_err(&i2s->pdev->dev,
-			"Invalid clock divider(%d)\n", div_id);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static snd_pcm_sframes_t
-i2sv2_i2s_delay(struct snd_pcm_substream *substream, struct snd_soc_dai *dai)
-{
-	struct i2s_dai *i2s = to_info(dai);
-	u32 reg = readl(i2s->addr + I2SFIC);
-	snd_pcm_sframes_t delay;
-
-	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
-		delay = FIC_RXCOUNT(reg);
-	else if (is_secondary(i2s))
-		delay = FICS_TXCOUNT(readl(i2s->addr + I2SFICS));
-	else
-		delay = FIC_TXCOUNT(reg);
-
-	return delay;
-}
-
-#ifdef CONFIG_PM
-static int i2sv2_i2s_suspend(struct snd_soc_dai *dai)
-{
-	struct i2s_dai *i2s = to_info(dai);
-
-	if (dai->active) {
-		i2s->suspend_i2smod = readl(i2s->addr + I2SMOD);
-		i2s->suspend_i2scon = readl(i2s->addr + I2SCON);
-		i2s->suspend_i2spsr = readl(i2s->addr + I2SPSR);
-	}
-
-	return 0;
-}
-
-static int i2sv2_i2s_resume(struct snd_soc_dai *dai)
-{
-	struct i2s_dai *i2s = to_info(dai);
-
-	if (dai->active) {
-		writel(i2s->suspend_i2scon, i2s->addr + I2SCON);
-		writel(i2s->suspend_i2smod, i2s->addr + I2SMOD);
-		writel(i2s->suspend_i2spsr, i2s->addr + I2SPSR);
-	}
-
-	return 0;
-}
-#else
-#define i2sv2_i2s_suspend NULL
-#define i2sv2_i2s_resume  NULL
-#endif
-
-static int samsung_i2s_dai_probe(struct snd_soc_dai *dai)
-{
-	struct i2s_dai *i2s = to_info(dai);
-	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
-
-	if (other && other->clk) /* If this is probe on secondary */
-		goto probe_exit;
-
-	i2s->addr = ioremap(i2s->base, 0x100);
-	if (i2s->addr == NULL) {
-		dev_err(&i2s->pdev->dev, "cannot ioremap registers\n");
-		return -ENXIO;
-	}
-
-	i2s->clk = clk_get(&i2s->pdev->dev, "iis");
-	if (IS_ERR(i2s->clk)) {
-		dev_err(&i2s->pdev->dev, "failed to get i2s_clock\n");
-		iounmap(i2s->addr);
-		return -ENOENT;
-	}
-	clk_enable(i2s->clk);
-
-	if (other) {
-		other->addr = i2s->addr;
-		other->clk = i2s->clk;
-	}
-
-	if (i2s->quirks & QUIRK_NEED_RSTCLR)
-		writel(CON_RSTCLR, i2s->addr + I2SCON);
-
-probe_exit:
-	/* Reset any constraint on RFS and BFS */
-	i2s->rfs = 0;
-	i2s->bfs = 0;
-	s3c_i2sv2_txctrl(i2s, 0);
-	s3c_i2sv2_rxctrl(i2s, 0);
-	s3c_i2sv2_fifo(i2s, FIC_TXFLUSH);
-	s3c_i2sv2_fifo(other, FIC_TXFLUSH);
-	s3c_i2sv2_fifo(i2s, FIC_RXFLUSH);
-
-	/* Gate CDCLK by default */
-	if (!is_opened(other))
-		s3c_i2sv2_set_sysclk(dai, SAMSUNG_I2S_CDCLK,
-				0, SND_SOC_CLOCK_IN);
-
-	return 0;
-}
-
-static int samsung_i2s_dai_remove(struct snd_soc_dai *dai)
-{
-	struct i2s_dai *i2s = snd_soc_dai_get_drvdata(dai);
-	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
-
-	if (!other || !other->clk) {
-
-		if (i2s->quirks & QUIRK_NEED_RSTCLR)
-			writel(0, i2s->addr + I2SCON);
-
-		clk_disable(i2s->clk);
-		clk_put(i2s->clk);
-
-		iounmap(i2s->addr);
-	}
-
-	i2s->clk = NULL;
-
-	return 0;
-}
-
-static struct snd_soc_dai_ops samsung_i2s_dai_ops = {
-	.trigger = i2sv2_i2s_trigger,
-	.hw_params = s3c_i2sv2_hw_params,
-	.set_fmt = i2sv2_i2s_set_fmt,
-	.set_clkdiv = i2sv2_i2s_set_clkdiv,
-	.set_sysclk = s3c_i2sv2_set_sysclk,
-	.startup = s3c_i2sv2_startup,
-	.shutdown = s3c_i2sv2_shutdown,
-	.delay = i2sv2_i2s_delay,
-};
-
-#define SAMSUNG_I2S_RATES \
-	(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
-	SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
-	SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
-
-#define SAMSUNG_I2S_FMTS \
-	(SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\
-	 SNDRV_PCM_FMTBIT_S24_LE)
-
-static __devinit
-struct i2s_dai *s3c_alloc_dai(struct platform_device *pdev, bool sec)
-{
-	struct i2s_dai *i2s;
-
-	i2s = kzalloc(sizeof(struct i2s_dai), GFP_KERNEL);
-	if (i2s == NULL)
-		return NULL;
-
-	i2s->pdev = pdev;
-	i2s->pri_dai = NULL;
-	i2s->sec_dai = NULL;
-	i2s->s3c_i2s_drv.symmetric_rates = 1;
-	i2s->s3c_i2s_drv.probe = samsung_i2s_dai_probe;
-	i2s->s3c_i2s_drv.remove = samsung_i2s_dai_remove;
-	i2s->s3c_i2s_drv.ops = &samsung_i2s_dai_ops;
-	i2s->s3c_i2s_drv.suspend = i2sv2_i2s_suspend;
-	i2s->s3c_i2s_drv.resume = i2sv2_i2s_resume;
-	i2s->s3c_i2s_drv.playback.channels_min = 2;
-	i2s->s3c_i2s_drv.playback.channels_max = 2;
-	i2s->s3c_i2s_drv.playback.rates = SAMSUNG_I2S_RATES;
-	i2s->s3c_i2s_drv.playback.formats = SAMSUNG_I2S_FMTS;
-
-	if (!sec) {
-		i2s->s3c_i2s_drv.capture.channels_min = 2;
-		i2s->s3c_i2s_drv.capture.channels_max = 2;
-		i2s->s3c_i2s_drv.capture.rates = SAMSUNG_I2S_RATES;
-		i2s->s3c_i2s_drv.capture.formats = SAMSUNG_I2S_FMTS;
-	} else {	/* Create a new platform_device for Secondary */
-		i2s->pdev = platform_device_register_resndata(NULL,
-				pdev->name, pdev->id + MAX_I2S,
-				NULL, 0, NULL, 0);
-		if (IS_ERR(i2s->pdev)) {
-			kfree(i2s);
-			return NULL;
-		}
-	}
-
-	/* Pre-assign snd_soc_dai_set_drvdata */
-	dev_set_drvdata(&i2s->pdev->dev, i2s);
-
-	return i2s;
-}
-
-static __devinit int samsung_i2s_probe(struct platform_device *pdev)
-{
-	u32 dma_pl_chan, dma_cp_chan, dma_pl_sec_chan;
-	struct i2s_dai *pri_dai, *sec_dai = NULL;
-	struct s3c_audio_pdata *i2s_pdata;
-	struct samsung_i2s *i2s_cfg;
-	struct resource *res;
-	u32 regs_base, quirks;
-	int ret = 0;
-
-	/* Call during Seconday interface registration */
-	if (pdev->id >= MAX_I2S) {
-		sec_dai = dev_get_drvdata(&pdev->dev);
-		snd_soc_register_dai(&sec_dai->pdev->dev,
-			&sec_dai->s3c_i2s_drv);
-		return 0;
-	}
-
-	i2s_pdata = pdev->dev.platform_data;
-	if (i2s_pdata == NULL) {
-		dev_err(&pdev->dev, "Can't work without s3c_audio_pdata\n");
-		return -EINVAL;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "Unable to get I2S-TX dma resource\n");
-		return -ENXIO;
-	}
-	dma_pl_chan = res->start;
-
-	res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-	if (!res) {
-		dev_err(&pdev->dev, "Unable to get I2S-RX dma resource\n");
-		return -ENXIO;
-	}
-	dma_cp_chan = res->start;
-
-	res = platform_get_resource(pdev, IORESOURCE_DMA, 2);
-	if (res)
-		dma_pl_sec_chan = res->start;
-	else
-		dma_pl_sec_chan = 0;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "Unable to get I2S SFR address\n");
-		return -ENXIO;
-	}
-
-	if (!request_mem_region(res->start, resource_size(res),
-							"samsung-i2s")) {
-		dev_err(&pdev->dev, "Unable to request SFR region\n");
-		return -EBUSY;
-	}
-	regs_base = res->start;
-
-	i2s_cfg = &i2s_pdata->type.i2s;
-	quirks = i2s_cfg->quirks;
-
-	pri_dai = s3c_alloc_dai(pdev, false);
-	if (!pri_dai) {
-		dev_err(&pdev->dev, "Unable to alloc I2S_pri\n");
-		ret = -ENOMEM;
-		goto err1;
-	}
-
-	pri_dai->dma_playback.dma_addr = regs_base + I2STXD;
-	pri_dai->dma_capture.dma_addr = regs_base + I2SRXD;
-	pri_dai->dma_playback.client =
-		(struct s3c2410_dma_client *)&pri_dai->dma_playback;
-	pri_dai->dma_capture.client =
-		(struct s3c2410_dma_client *)&pri_dai->dma_capture;
-	pri_dai->dma_playback.channel = dma_pl_chan;
-	pri_dai->dma_capture.channel = dma_cp_chan;
-	pri_dai->src_clk = i2s_cfg->src_clk;
-	pri_dai->dma_playback.dma_size = 4;
-	pri_dai->dma_capture.dma_size = 4;
-	pri_dai->base = regs_base;
-	pri_dai->quirks = quirks;
-
-	if (quirks & QUIRK_PRI_6CHAN)
-		pri_dai->s3c_i2s_drv.playback.channels_max = 6;
-
-	if (quirks & QUIRK_SEC_DAI) {
-		sec_dai = s3c_alloc_dai(pdev, true);
-		if (!sec_dai) {
-			dev_err(&pdev->dev, "Unable to alloc I2S_sec\n");
-			ret = -ENOMEM;
-			goto err2;
-		}
-		sec_dai->dma_playback.dma_addr = regs_base + I2STXDS;
-		sec_dai->dma_playback.client =
-			(struct s3c2410_dma_client *)&sec_dai->dma_playback;
-		/* Use iDMA always if SysDMA not provided */
-		sec_dai->dma_playback.channel = dma_pl_sec_chan ? : -1;
-		sec_dai->src_clk = i2s_cfg->src_clk;
-		sec_dai->dma_playback.dma_size = 4;
-		sec_dai->base = regs_base;
-		sec_dai->quirks = quirks;
-		sec_dai->pri_dai = pri_dai;
-		pri_dai->sec_dai = sec_dai;
-	}
-
-	if (i2s_pdata->cfg_gpio && i2s_pdata->cfg_gpio(pdev)) {
-		dev_err(&pdev->dev, "Unable to configure gpio\n");
-		ret = -EINVAL;
-		goto err3;
-	}
-
-	snd_soc_register_dai(&pri_dai->pdev->dev, &pri_dai->s3c_i2s_drv);
-
-	return 0;
-err3:
-	kfree(sec_dai);
-err2:
-	kfree(pri_dai);
-err1:
-	release_mem_region(regs_base, resource_size(res));
-
-	return ret;
-}
-
-static __devexit int samsung_i2s_remove(struct platform_device *pdev)
-{
-	struct i2s_dai *i2s, *other;
-
-	i2s = dev_get_drvdata(&pdev->dev);
-	other = i2s->pri_dai ? : i2s->sec_dai;
-
-	if (other) {
-		other->pri_dai = NULL;
-		other->sec_dai = NULL;
-	} else {
-		struct resource *res;
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-		if (res)
-			release_mem_region(res->start, resource_size(res));
-	}
-
-	i2s->pri_dai = NULL;
-	i2s->sec_dai = NULL;
-
-	kfree(i2s);
-
-	snd_soc_unregister_dai(&pdev->dev);
-
-	return 0;
-}
-
-static struct platform_driver samsung_i2s_driver = {
-	.probe  = samsung_i2s_probe,
-	.remove = samsung_i2s_remove,
-	.driver = {
-		.name = "samsung-i2s",
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init samsung_i2s_init(void)
-{
-	return platform_driver_register(&samsung_i2s_driver);
-}
-module_init(samsung_i2s_init);
-
-static void __exit samsung_i2s_exit(void)
-{
-	platform_driver_unregister(&samsung_i2s_driver);
-}
-module_exit(samsung_i2s_exit);
-
-/* Module information */
-MODULE_AUTHOR("Jaswinder Singh, <jassi.brar@samsung.com>");
-MODULE_DESCRIPTION("Samsung I2S Interface");
-MODULE_ALIAS("platform:samsung-i2s");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/i2s.h b/sound/soc/s3c24xx/i2s.h
deleted file mode 100644
index 77b7965..0000000
--- a/sound/soc/s3c24xx/i2s.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* sound/soc/s3c24xx/i2s.h
- *
- * ALSA SoC Audio Layer - Samsung I2S Controller driver
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __SND_SOC_SAMSUNG_I2S_H
-#define __SND_SOC_SAMSUNG_I2S_H
-
-/*
- * Maximum number of I2S blocks that any SoC can have.
- * The secondary interface of a CPU dai(if there exists any),
- * is indexed at [cpu-dai's ID + MAX_I2S]
- */
-#define MAX_I2S	4
-
-#define SAMSUNG_I2S_DIV_BCLK	1
-
-#define SAMSUNG_I2S_RCLKSRC_0	0
-#define SAMSUNG_I2S_RCLKSRC_1	1
-#define SAMSUNG_I2S_CDCLK		2
-
-#endif /* __SND_SOC_SAMSUNG_I2S_H */
diff --git a/sound/soc/s3c24xx/jive_wm8750.c b/sound/soc/s3c24xx/jive_wm8750.c
deleted file mode 100644
index 4e1b8ac..0000000
--- a/sound/soc/s3c24xx/jive_wm8750.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/* sound/soc/s3c24xx/jive_wm8750.c
- *
- * Copyright 2007,2008 Simtec Electronics
- *
- * Based on sound/soc/pxa/spitz.c
- *	Copyright 2005 Wolfson Microelectronics PLC.
- *	Copyright 2005 Openedhand Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <sound/soc-dapm.h>
-
-#include <asm/mach-types.h>
-
-#include "dma.h"
-#include "s3c2412-i2s.h"
-
-#include "../codecs/wm8750.h"
-
-static const struct snd_soc_dapm_route audio_map[] = {
-	{ "Headphone Jack", NULL, "LOUT1" },
-	{ "Headphone Jack", NULL, "ROUT1" },
-	{ "Internal Speaker", NULL, "LOUT2" },
-	{ "Internal Speaker", NULL, "ROUT2" },
-	{ "LINPUT1", NULL, "Line Input" },
-	{ "RINPUT1", NULL, "Line Input" },
-};
-
-static const struct snd_soc_dapm_widget wm8750_dapm_widgets[] = {
-	SND_SOC_DAPM_HP("Headphone Jack", NULL),
-	SND_SOC_DAPM_SPK("Internal Speaker", NULL),
-	SND_SOC_DAPM_LINE("Line In", NULL),
-};
-
-static int jive_hw_params(struct snd_pcm_substream *substream,
-			  struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct s3c_i2sv2_rate_calc div;
-	unsigned int clk = 0;
-	int ret = 0;
-
-	switch (params_rate(params)) {
-	case 8000:
-	case 16000:
-	case 48000:
-	case 96000:
-		clk = 12288000;
-		break;
-	case 11025:
-	case 22050:
-	case 44100:
-		clk = 11289600;
-		break;
-	}
-
-	s3c_i2sv2_iis_calc_rate(&div, NULL, params_rate(params),
-				s3c_i2sv2_get_clock(cpu_dai));
-
-	/* set codec DAI configuration */
-	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
-				  SND_SOC_DAIFMT_NB_NF |
-				  SND_SOC_DAIFMT_CBS_CFS);
-	if (ret < 0)
-		return ret;
-
-	/* set cpu DAI configuration */
-	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
-				  SND_SOC_DAIFMT_NB_NF |
-				  SND_SOC_DAIFMT_CBS_CFS);
-	if (ret < 0)
-		return ret;
-
-	/* set the codec system clock for DAC and ADC */
-	ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
-				     SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C2412_DIV_RCLK, div.fs_div);
-	if (ret < 0)
-		return ret;
-
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C2412_DIV_PRESCALER,
-				     div.clk_div - 1);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static struct snd_soc_ops jive_ops = {
-	.hw_params	= jive_hw_params,
-};
-
-static int jive_wm8750_init(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_soc_codec *codec = rtd->codec;
-	int err;
-
-	/* These endpoints are not being used. */
-	snd_soc_dapm_nc_pin(codec, "LINPUT2");
-	snd_soc_dapm_nc_pin(codec, "RINPUT2");
-	snd_soc_dapm_nc_pin(codec, "LINPUT3");
-	snd_soc_dapm_nc_pin(codec, "RINPUT3");
-	snd_soc_dapm_nc_pin(codec, "OUT3");
-	snd_soc_dapm_nc_pin(codec, "MONO");
-
-	/* Add jive specific widgets */
-	err = snd_soc_dapm_new_controls(codec, wm8750_dapm_widgets,
-					ARRAY_SIZE(wm8750_dapm_widgets));
-	if (err) {
-		printk(KERN_ERR "%s: failed to add widgets (%d)\n",
-		       __func__, err);
-		return err;
-	}
-
-	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
-	snd_soc_dapm_sync(codec);
-
-	return 0;
-}
-
-static struct snd_soc_dai_link jive_dai = {
-	.name		= "wm8750",
-	.stream_name	= "WM8750",
-	.cpu_dai_name	= "s3c2412-i2s",
-	.codec_dai_name = "wm8750-hifi",
-	.platform_name	= "samsung-audio",
-	.codec_name	= "wm8750-codec.0-0x1a",
-	.init		= jive_wm8750_init,
-	.ops		= &jive_ops,
-};
-
-/* jive audio machine driver */
-static struct snd_soc_card snd_soc_machine_jive = {
-	.name		= "Jive",
-	.dai_link	= &jive_dai,
-	.num_links	= 1,
-};
-
-static struct platform_device *jive_snd_device;
-
-static int __init jive_init(void)
-{
-	int ret;
-
-	if (!machine_is_jive())
-		return 0;
-
-	printk("JIVE WM8750 Audio support\n");
-
-	jive_snd_device = platform_device_alloc("soc-audio", -1);
-	if (!jive_snd_device)
-		return -ENOMEM;
-
-	platform_set_drvdata(jive_snd_device, &snd_soc_machine_jive);
-	ret = platform_device_add(jive_snd_device);
-
-	if (ret)
-		platform_device_put(jive_snd_device);
-
-	return ret;
-}
-
-static void __exit jive_exit(void)
-{
-	platform_device_unregister(jive_snd_device);
-}
-
-module_init(jive_init);
-module_exit(jive_exit);
-
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("ALSA SoC Jive Audio support");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/lm4857.h b/sound/soc/s3c24xx/lm4857.h
deleted file mode 100644
index 0cf5b70..0000000
--- a/sound/soc/s3c24xx/lm4857.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * lm4857.h  --  ALSA Soc Audio Layer
- *
- * Copyright 2007 Wolfson Microelectronics PLC.
- * Author: Graeme Gregory
- *         graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  Revision history
- *    18th Jun 2007   Initial version.
- */
-
-#ifndef LM4857_H_
-#define LM4857_H_
-
-/* The register offsets in the cache array */
-#define LM4857_MVOL 0
-#define LM4857_LVOL 1
-#define LM4857_RVOL 2
-#define LM4857_CTRL 3
-
-/* the shifts required to set these bits */
-#define LM4857_3D 5
-#define LM4857_WAKEUP 5
-#define LM4857_EPGAIN 4
-
-#endif /*LM4857_H_*/
-
diff --git a/sound/soc/s3c24xx/ln2440sbc_alc650.c b/sound/soc/s3c24xx/ln2440sbc_alc650.c
deleted file mode 100644
index e507174..0000000
--- a/sound/soc/s3c24xx/ln2440sbc_alc650.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * SoC audio for ln2440sbc
- *
- * Copyright 2007 KonekTel, a.s.
- * Author: Ivan Kuten
- *         ivan.kuten@promwad.com
- *
- * Heavily based on smdk2443_wm9710.c
- * Copyright 2007 Wolfson Microelectronics PLC.
- * Author: Graeme Gregory
- *         graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <sound/soc-dapm.h>
-
-#include "dma.h"
-#include "ac97.h"
-
-static struct snd_soc_card ln2440sbc;
-
-static struct snd_soc_dai_link ln2440sbc_dai[] = {
-{
-	.name = "AC97",
-	.stream_name = "AC97 HiFi",
-	.cpu_dai_name = "samsung-ac97",
-	.codec_dai_name = "ac97-hifi",
-	.codec_name = "ac97-codec",
-	.platform_name = "samsung-audio",
-},
-};
-
-static struct snd_soc_card ln2440sbc = {
-	.name = "LN2440SBC",
-	.dai_link = ln2440sbc_dai,
-	.num_links = ARRAY_SIZE(ln2440sbc_dai),
-};
-
-static struct platform_device *ln2440sbc_snd_ac97_device;
-
-static int __init ln2440sbc_init(void)
-{
-	int ret;
-
-	ln2440sbc_snd_ac97_device = platform_device_alloc("soc-audio", -1);
-	if (!ln2440sbc_snd_ac97_device)
-		return -ENOMEM;
-
-	platform_set_drvdata(ln2440sbc_snd_ac97_device, &ln2440sbc);
-	ret = platform_device_add(ln2440sbc_snd_ac97_device);
-
-	if (ret)
-		platform_device_put(ln2440sbc_snd_ac97_device);
-
-	return ret;
-}
-
-static void __exit ln2440sbc_exit(void)
-{
-	platform_device_unregister(ln2440sbc_snd_ac97_device);
-}
-
-module_init(ln2440sbc_init);
-module_exit(ln2440sbc_exit);
-
-/* Module information */
-MODULE_AUTHOR("Ivan Kuten");
-MODULE_DESCRIPTION("ALSA SoC ALC650 LN2440SBC");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
deleted file mode 100644
index c4b2013..0000000
--- a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
+++ /dev/null
@@ -1,504 +0,0 @@
-/*
- * neo1973_gta02_wm8753.c  --  SoC audio for Openmoko Freerunner(GTA02)
- *
- * Copyright 2007 Openmoko Inc
- * Author: Graeme Gregory <graeme@openmoko.org>
- * Copyright 2007 Wolfson Microelectronics PLC.
- * Author: Graeme Gregory <linux@wolfsonmicro.com>
- * Copyright 2009 Wolfson Microelectronics
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <sound/soc-dapm.h>
-
-#include <asm/mach-types.h>
-
-#include <plat/regs-iis.h>
-
-#include <mach/regs-clock.h>
-#include <asm/io.h>
-#include <mach/gta02.h>
-#include "../codecs/wm8753.h"
-#include "dma.h"
-#include "s3c24xx-i2s.h"
-
-static struct snd_soc_card neo1973_gta02;
-
-static int neo1973_gta02_hifi_hw_params(struct snd_pcm_substream *substream,
-	struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	unsigned int pll_out = 0, bclk = 0;
-	int ret = 0;
-	unsigned long iis_clkrate;
-
-	iis_clkrate = s3c24xx_i2s_get_clockrate();
-
-	switch (params_rate(params)) {
-	case 8000:
-	case 16000:
-		pll_out = 12288000;
-		break;
-	case 48000:
-		bclk = WM8753_BCLK_DIV_4;
-		pll_out = 12288000;
-		break;
-	case 96000:
-		bclk = WM8753_BCLK_DIV_2;
-		pll_out = 12288000;
-		break;
-	case 11025:
-		bclk = WM8753_BCLK_DIV_16;
-		pll_out = 11289600;
-		break;
-	case 22050:
-		bclk = WM8753_BCLK_DIV_8;
-		pll_out = 11289600;
-		break;
-	case 44100:
-		bclk = WM8753_BCLK_DIV_4;
-		pll_out = 11289600;
-		break;
-	case 88200:
-		bclk = WM8753_BCLK_DIV_2;
-		pll_out = 11289600;
-		break;
-	}
-
-	/* set codec DAI configuration */
-	ret = snd_soc_dai_set_fmt(codec_dai,
-		SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
-		SND_SOC_DAIFMT_CBM_CFM);
-	if (ret < 0)
-		return ret;
-
-	/* set cpu DAI configuration */
-	ret = snd_soc_dai_set_fmt(cpu_dai,
-		SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
-		SND_SOC_DAIFMT_CBM_CFM);
-	if (ret < 0)
-		return ret;
-
-	/* set the codec system clock for DAC and ADC */
-	ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_MCLK, pll_out,
-		SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	/* set MCLK division for sample rate */
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
-		S3C2410_IISMOD_32FS);
-	if (ret < 0)
-		return ret;
-
-	/* set codec BCLK division for sample rate */
-	ret = snd_soc_dai_set_clkdiv(codec_dai,
-					WM8753_BCLKDIV, bclk);
-	if (ret < 0)
-		return ret;
-
-	/* set prescaler division for sample rate */
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
-		S3C24XX_PRESCALE(4, 4));
-	if (ret < 0)
-		return ret;
-
-	/* codec PLL input is PCLK/4 */
-	ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0,
-		iis_clkrate / 4, pll_out);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static int neo1973_gta02_hifi_hw_free(struct snd_pcm_substream *substream)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-
-	/* disable the PLL */
-	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0, 0);
-}
-
-/*
- * Neo1973 WM8753 HiFi DAI opserations.
- */
-static struct snd_soc_ops neo1973_gta02_hifi_ops = {
-	.hw_params = neo1973_gta02_hifi_hw_params,
-	.hw_free = neo1973_gta02_hifi_hw_free,
-};
-
-static int neo1973_gta02_voice_hw_params(
-	struct snd_pcm_substream *substream,
-	struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	unsigned int pcmdiv = 0;
-	int ret = 0;
-	unsigned long iis_clkrate;
-
-	iis_clkrate = s3c24xx_i2s_get_clockrate();
-
-	if (params_rate(params) != 8000)
-		return -EINVAL;
-	if (params_channels(params) != 1)
-		return -EINVAL;
-
-	pcmdiv = WM8753_PCM_DIV_6; /* 2.048 MHz */
-
-	/* todo: gg check mode (DSP_B) against CSR datasheet */
-	/* set codec DAI configuration */
-	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B |
-		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
-	if (ret < 0)
-		return ret;
-
-	/* set the codec system clock for DAC and ADC */
-	ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_PCMCLK,
-		12288000, SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	/* set codec PCM division for sample rate */
-	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_PCMDIV,
-					pcmdiv);
-	if (ret < 0)
-		return ret;
-
-	/* configue and enable PLL for 12.288MHz output */
-	ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0,
-		iis_clkrate / 4, 12288000);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static int neo1973_gta02_voice_hw_free(struct snd_pcm_substream *substream)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-
-	/* disable the PLL */
-	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0, 0);
-}
-
-static struct snd_soc_ops neo1973_gta02_voice_ops = {
-	.hw_params = neo1973_gta02_voice_hw_params,
-	.hw_free = neo1973_gta02_voice_hw_free,
-};
-
-#define LM4853_AMP 1
-#define LM4853_SPK 2
-
-static u8 lm4853_state;
-
-/* This has no effect, it exists only to maintain compatibility with
- * existing ALSA state files.
- */
-static int lm4853_set_state(struct snd_kcontrol *kcontrol,
-	struct snd_ctl_elem_value *ucontrol)
-{
-	int val = ucontrol->value.integer.value[0];
-
-	if (val)
-		lm4853_state |= LM4853_AMP;
-	else
-		lm4853_state &= ~LM4853_AMP;
-
-	return 0;
-}
-
-static int lm4853_get_state(struct snd_kcontrol *kcontrol,
-	struct snd_ctl_elem_value *ucontrol)
-{
-	ucontrol->value.integer.value[0] = lm4853_state & LM4853_AMP;
-
-	return 0;
-}
-
-static int lm4853_set_spk(struct snd_kcontrol *kcontrol,
-	struct snd_ctl_elem_value *ucontrol)
-{
-	int val = ucontrol->value.integer.value[0];
-
-	if (val) {
-		lm4853_state |= LM4853_SPK;
-		gpio_set_value(GTA02_GPIO_HP_IN, 0);
-	} else {
-		lm4853_state &= ~LM4853_SPK;
-		gpio_set_value(GTA02_GPIO_HP_IN, 1);
-	}
-
-	return 0;
-}
-
-static int lm4853_get_spk(struct snd_kcontrol *kcontrol,
-	struct snd_ctl_elem_value *ucontrol)
-{
-	ucontrol->value.integer.value[0] = (lm4853_state & LM4853_SPK) >> 1;
-
-	return 0;
-}
-
-static int lm4853_event(struct snd_soc_dapm_widget *w,
-			struct snd_kcontrol *k,
-			int event)
-{
-	gpio_set_value(GTA02_GPIO_AMP_SHUT, SND_SOC_DAPM_EVENT_OFF(event));
-
-	return 0;
-}
-
-static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = {
-	SND_SOC_DAPM_SPK("Stereo Out", lm4853_event),
-	SND_SOC_DAPM_LINE("GSM Line Out", NULL),
-	SND_SOC_DAPM_LINE("GSM Line In", NULL),
-	SND_SOC_DAPM_MIC("Headset Mic", NULL),
-	SND_SOC_DAPM_MIC("Handset Mic", NULL),
-	SND_SOC_DAPM_SPK("Handset Spk", NULL),
-};
-
-
-/* example machine audio_mapnections */
-static const struct snd_soc_dapm_route audio_map[] = {
-
-	/* Connections to the lm4853 amp */
-	{"Stereo Out", NULL, "LOUT1"},
-	{"Stereo Out", NULL, "ROUT1"},
-
-	/* Connections to the GSM Module */
-	{"GSM Line Out", NULL, "MONO1"},
-	{"GSM Line Out", NULL, "MONO2"},
-	{"RXP", NULL, "GSM Line In"},
-	{"RXN", NULL, "GSM Line In"},
-
-	/* Connections to Headset */
-	{"MIC1", NULL, "Mic Bias"},
-	{"Mic Bias", NULL, "Headset Mic"},
-
-	/* Call Mic */
-	{"MIC2", NULL, "Mic Bias"},
-	{"MIC2N", NULL, "Mic Bias"},
-	{"Mic Bias", NULL, "Handset Mic"},
-
-	/* Call Speaker */
-	{"Handset Spk", NULL, "LOUT2"},
-	{"Handset Spk", NULL, "ROUT2"},
-
-	/* Connect the ALC pins */
-	{"ACIN", NULL, "ACOP"},
-};
-
-static const struct snd_kcontrol_new wm8753_neo1973_gta02_controls[] = {
-	SOC_DAPM_PIN_SWITCH("Stereo Out"),
-	SOC_DAPM_PIN_SWITCH("GSM Line Out"),
-	SOC_DAPM_PIN_SWITCH("GSM Line In"),
-	SOC_DAPM_PIN_SWITCH("Headset Mic"),
-	SOC_DAPM_PIN_SWITCH("Handset Mic"),
-	SOC_DAPM_PIN_SWITCH("Handset Spk"),
-
-	/* This has no effect, it exists only to maintain compatibility with
-	 * existing ALSA state files.
-	 */
-	SOC_SINGLE_EXT("Amp State Switch", 6, 0, 1, 0,
-		lm4853_get_state,
-		lm4853_set_state),
-	SOC_SINGLE_EXT("Amp Spk Switch", 7, 0, 1, 0,
-		lm4853_get_spk,
-		lm4853_set_spk),
-};
-
-/*
- * This is an example machine initialisation for a wm8753 connected to a
- * neo1973 GTA02.
- */
-static int neo1973_gta02_wm8753_init(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_soc_codec *codec = rtd->codec;
-	int err;
-
-	/* set up NC codec pins */
-	snd_soc_dapm_nc_pin(codec, "OUT3");
-	snd_soc_dapm_nc_pin(codec, "OUT4");
-	snd_soc_dapm_nc_pin(codec, "LINE1");
-	snd_soc_dapm_nc_pin(codec, "LINE2");
-
-	/* Add neo1973 gta02 specific widgets */
-	snd_soc_dapm_new_controls(codec, wm8753_dapm_widgets,
-				  ARRAY_SIZE(wm8753_dapm_widgets));
-
-	/* add neo1973 gta02 specific controls */
-	err = snd_soc_add_controls(codec, wm8753_neo1973_gta02_controls,
-		ARRAY_SIZE(wm8753_neo1973_gta02_controls));
-
-	if (err < 0)
-		return err;
-
-	/* set up neo1973 gta02 specific audio path audio_map */
-	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
-
-	/* set endpoints to default off mode */
-	snd_soc_dapm_disable_pin(codec, "Stereo Out");
-	snd_soc_dapm_disable_pin(codec, "GSM Line Out");
-	snd_soc_dapm_disable_pin(codec, "GSM Line In");
-	snd_soc_dapm_disable_pin(codec, "Headset Mic");
-	snd_soc_dapm_disable_pin(codec, "Handset Mic");
-	snd_soc_dapm_disable_pin(codec, "Handset Spk");
-
-	/* allow audio paths from the GSM modem to run during suspend */
-	snd_soc_dapm_ignore_suspend(codec, "Stereo Out");
-	snd_soc_dapm_ignore_suspend(codec, "GSM Line Out");
-	snd_soc_dapm_ignore_suspend(codec, "GSM Line In");
-	snd_soc_dapm_ignore_suspend(codec, "Headset Mic");
-	snd_soc_dapm_ignore_suspend(codec, "Handset Mic");
-	snd_soc_dapm_ignore_suspend(codec, "Handset Spk");
-
-	snd_soc_dapm_sync(codec);
-
-	return 0;
-}
-
-/*
- * BT Codec DAI
- */
-static struct snd_soc_dai_driver bt_dai = {
-	.name = "bluetooth-dai",
-	.playback = {
-		.channels_min = 1,
-		.channels_max = 1,
-		.rates = SNDRV_PCM_RATE_8000,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
-	.capture = {
-		.channels_min = 1,
-		.channels_max = 1,
-		.rates = SNDRV_PCM_RATE_8000,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
-};
-
-static struct snd_soc_dai_link neo1973_gta02_dai[] = {
-{ /* Hifi Playback - for similatious use with voice below */
-	.name = "WM8753",
-	.stream_name = "WM8753 HiFi",
-	.cpu_dai_name = "s3c24xx-i2s",
-	.codec_dai_name = "wm8753-hifi",
-	.init = neo1973_gta02_wm8753_init,
-	.platform_name = "samsung-audio",
-	.codec_name = "wm8753-codec.0-0x1a",
-	.ops = &neo1973_gta02_hifi_ops,
-},
-{ /* Voice via BT */
-	.name = "Bluetooth",
-	.stream_name = "Voice",
-	.cpu_dai_name = "bluetooth-dai",
-	.codec_dai_name = "wm8753-voice",
-	.ops = &neo1973_gta02_voice_ops,
-	.codec_name = "wm8753-codec.0-0x1a",
-	.platform_name = "samsung-audio",
-},
-};
-
-static struct snd_soc_card neo1973_gta02 = {
-	.name = "neo1973-gta02",
-	.dai_link = neo1973_gta02_dai,
-	.num_links = ARRAY_SIZE(neo1973_gta02_dai),
-};
-
-static struct platform_device *neo1973_gta02_snd_device;
-
-static int __init neo1973_gta02_init(void)
-{
-	int ret;
-
-	if (!machine_is_neo1973_gta02()) {
-		printk(KERN_INFO
-		       "Only GTA02 is supported by this ASoC driver\n");
-		return -ENODEV;
-	}
-
-	neo1973_gta02_snd_device = platform_device_alloc("soc-audio", -1);
-	if (!neo1973_gta02_snd_device)
-		return -ENOMEM;
-
-	/* register bluetooth DAI here */
-	ret = snd_soc_register_dai(&neo1973_gta02_snd_device->dev, -1, &bt_dai);
-	if (ret) {
-		platform_device_put(neo1973_gta02_snd_device);
-		return ret;
-	}
-
-	platform_set_drvdata(neo1973_gta02_snd_device, &neo1973_gta02);
-	ret = platform_device_add(neo1973_gta02_snd_device);
-
-	if (ret) {
-		platform_device_put(neo1973_gta02_snd_device);
-		return ret;
-	}
-
-	/* Initialise GPIOs used by amp */
-	ret = gpio_request(GTA02_GPIO_HP_IN, "GTA02_HP_IN");
-	if (ret) {
-		pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_HP_IN);
-		goto err_unregister_device;
-	}
-
-	ret = gpio_direction_output(GTA02_GPIO_HP_IN, 1);
-	if (ret) {
-		pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_HP_IN);
-		goto err_free_gpio_hp_in;
-	}
-
-	ret = gpio_request(GTA02_GPIO_AMP_SHUT, "GTA02_AMP_SHUT");
-	if (ret) {
-		pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_AMP_SHUT);
-		goto err_free_gpio_hp_in;
-	}
-
-	ret = gpio_direction_output(GTA02_GPIO_AMP_SHUT, 1);
-	if (ret) {
-		pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_AMP_SHUT);
-		goto err_free_gpio_amp_shut;
-	}
-
-	return 0;
-
-err_free_gpio_amp_shut:
-	gpio_free(GTA02_GPIO_AMP_SHUT);
-err_free_gpio_hp_in:
-	gpio_free(GTA02_GPIO_HP_IN);
-err_unregister_device:
-	platform_device_unregister(neo1973_gta02_snd_device);
-	return ret;
-}
-module_init(neo1973_gta02_init);
-
-static void __exit neo1973_gta02_exit(void)
-{
-	snd_soc_unregister_dai(&neo1973_gta02_snd_device->dev, -1);
-	platform_device_unregister(neo1973_gta02_snd_device);
-	gpio_free(GTA02_GPIO_HP_IN);
-	gpio_free(GTA02_GPIO_AMP_SHUT);
-}
-module_exit(neo1973_gta02_exit);
-
-/* Module information */
-MODULE_AUTHOR("Graeme Gregory, graeme@openmoko.org");
-MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973 GTA02");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c
deleted file mode 100644
index 96dda57..0000000
--- a/sound/soc/s3c24xx/neo1973_wm8753.c
+++ /dev/null
@@ -1,704 +0,0 @@
-/*
- * neo1973_wm8753.c  --  SoC audio for Neo1973
- *
- * Copyright 2007 Wolfson Microelectronics PLC.
- * Author: Graeme Gregory
- *         graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <sound/soc-dapm.h>
-#include <sound/tlv.h>
-
-#include <asm/mach-types.h>
-#include <asm/hardware/scoop.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-#include <mach/hardware.h>
-#include <linux/io.h>
-#include <mach/spi-gpio.h>
-
-#include <plat/regs-iis.h>
-
-#include "../codecs/wm8753.h"
-#include "lm4857.h"
-#include "dma.h"
-#include "s3c24xx-i2s.h"
-
-/* define the scenarios */
-#define NEO_AUDIO_OFF			0
-#define NEO_GSM_CALL_AUDIO_HANDSET	1
-#define NEO_GSM_CALL_AUDIO_HEADSET	2
-#define NEO_GSM_CALL_AUDIO_BLUETOOTH	3
-#define NEO_STEREO_TO_SPEAKERS		4
-#define NEO_STEREO_TO_HEADPHONES	5
-#define NEO_CAPTURE_HANDSET		6
-#define NEO_CAPTURE_HEADSET		7
-#define NEO_CAPTURE_BLUETOOTH		8
-
-static struct snd_soc_card neo1973;
-static struct i2c_client *i2c;
-
-static int neo1973_hifi_hw_params(struct snd_pcm_substream *substream,
-	struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	unsigned int pll_out = 0, bclk = 0;
-	int ret = 0;
-	unsigned long iis_clkrate;
-
-	pr_debug("Entered %s\n", __func__);
-
-	iis_clkrate = s3c24xx_i2s_get_clockrate();
-
-	switch (params_rate(params)) {
-	case 8000:
-	case 16000:
-		pll_out = 12288000;
-		break;
-	case 48000:
-		bclk = WM8753_BCLK_DIV_4;
-		pll_out = 12288000;
-		break;
-	case 96000:
-		bclk = WM8753_BCLK_DIV_2;
-		pll_out = 12288000;
-		break;
-	case 11025:
-		bclk = WM8753_BCLK_DIV_16;
-		pll_out = 11289600;
-		break;
-	case 22050:
-		bclk = WM8753_BCLK_DIV_8;
-		pll_out = 11289600;
-		break;
-	case 44100:
-		bclk = WM8753_BCLK_DIV_4;
-		pll_out = 11289600;
-		break;
-	case 88200:
-		bclk = WM8753_BCLK_DIV_2;
-		pll_out = 11289600;
-		break;
-	}
-
-	/* set codec DAI configuration */
-	ret = snd_soc_dai_set_fmt(codec_dai,
-		SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
-		SND_SOC_DAIFMT_CBM_CFM);
-	if (ret < 0)
-		return ret;
-
-	/* set cpu DAI configuration */
-	ret = snd_soc_dai_set_fmt(cpu_dai,
-		SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
-		SND_SOC_DAIFMT_CBM_CFM);
-	if (ret < 0)
-		return ret;
-
-	/* set the codec system clock for DAC and ADC */
-	ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_MCLK, pll_out,
-		SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	/* set MCLK division for sample rate */
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
-		S3C2410_IISMOD_32FS);
-	if (ret < 0)
-		return ret;
-
-	/* set codec BCLK division for sample rate */
-	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_BCLKDIV, bclk);
-	if (ret < 0)
-		return ret;
-
-	/* set prescaler division for sample rate */
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
-		S3C24XX_PRESCALE(4, 4));
-	if (ret < 0)
-		return ret;
-
-	/* codec PLL input is PCLK/4 */
-	ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0,
-		iis_clkrate / 4, pll_out);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static int neo1973_hifi_hw_free(struct snd_pcm_substream *substream)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-
-	pr_debug("Entered %s\n", __func__);
-
-	/* disable the PLL */
-	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0, 0);
-}
-
-/*
- * Neo1973 WM8753 HiFi DAI opserations.
- */
-static struct snd_soc_ops neo1973_hifi_ops = {
-	.hw_params = neo1973_hifi_hw_params,
-	.hw_free = neo1973_hifi_hw_free,
-};
-
-static int neo1973_voice_hw_params(struct snd_pcm_substream *substream,
-	struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	unsigned int pcmdiv = 0;
-	int ret = 0;
-	unsigned long iis_clkrate;
-
-	pr_debug("Entered %s\n", __func__);
-
-	iis_clkrate = s3c24xx_i2s_get_clockrate();
-
-	if (params_rate(params) != 8000)
-		return -EINVAL;
-	if (params_channels(params) != 1)
-		return -EINVAL;
-
-	pcmdiv = WM8753_PCM_DIV_6; /* 2.048 MHz */
-
-	/* todo: gg check mode (DSP_B) against CSR datasheet */
-	/* set codec DAI configuration */
-	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B |
-		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
-	if (ret < 0)
-		return ret;
-
-	/* set the codec system clock for DAC and ADC */
-	ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_PCMCLK, 12288000,
-		SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	/* set codec PCM division for sample rate */
-	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_PCMDIV, pcmdiv);
-	if (ret < 0)
-		return ret;
-
-	/* configue and enable PLL for 12.288MHz output */
-	ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0,
-		iis_clkrate / 4, 12288000);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static int neo1973_voice_hw_free(struct snd_pcm_substream *substream)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-
-	pr_debug("Entered %s\n", __func__);
-
-	/* disable the PLL */
-	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0, 0);
-}
-
-static struct snd_soc_ops neo1973_voice_ops = {
-	.hw_params = neo1973_voice_hw_params,
-	.hw_free = neo1973_voice_hw_free,
-};
-
-static int neo1973_scenario;
-
-static int neo1973_get_scenario(struct snd_kcontrol *kcontrol,
-	struct snd_ctl_elem_value *ucontrol)
-{
-	ucontrol->value.integer.value[0] = neo1973_scenario;
-	return 0;
-}
-
-static int set_scenario_endpoints(struct snd_soc_codec *codec, int scenario)
-{
-	pr_debug("Entered %s\n", __func__);
-
-	switch (neo1973_scenario) {
-	case NEO_AUDIO_OFF:
-		snd_soc_dapm_disable_pin(codec, "Audio Out");
-		snd_soc_dapm_disable_pin(codec, "GSM Line Out");
-		snd_soc_dapm_disable_pin(codec, "GSM Line In");
-		snd_soc_dapm_disable_pin(codec, "Headset Mic");
-		snd_soc_dapm_disable_pin(codec, "Call Mic");
-		break;
-	case NEO_GSM_CALL_AUDIO_HANDSET:
-		snd_soc_dapm_enable_pin(codec, "Audio Out");
-		snd_soc_dapm_enable_pin(codec, "GSM Line Out");
-		snd_soc_dapm_enable_pin(codec, "GSM Line In");
-		snd_soc_dapm_disable_pin(codec, "Headset Mic");
-		snd_soc_dapm_enable_pin(codec, "Call Mic");
-		break;
-	case NEO_GSM_CALL_AUDIO_HEADSET:
-		snd_soc_dapm_enable_pin(codec, "Audio Out");
-		snd_soc_dapm_enable_pin(codec, "GSM Line Out");
-		snd_soc_dapm_enable_pin(codec, "GSM Line In");
-		snd_soc_dapm_enable_pin(codec, "Headset Mic");
-		snd_soc_dapm_disable_pin(codec, "Call Mic");
-		break;
-	case NEO_GSM_CALL_AUDIO_BLUETOOTH:
-		snd_soc_dapm_disable_pin(codec, "Audio Out");
-		snd_soc_dapm_enable_pin(codec, "GSM Line Out");
-		snd_soc_dapm_enable_pin(codec, "GSM Line In");
-		snd_soc_dapm_disable_pin(codec, "Headset Mic");
-		snd_soc_dapm_disable_pin(codec, "Call Mic");
-		break;
-	case NEO_STEREO_TO_SPEAKERS:
-		snd_soc_dapm_enable_pin(codec, "Audio Out");
-		snd_soc_dapm_disable_pin(codec, "GSM Line Out");
-		snd_soc_dapm_disable_pin(codec, "GSM Line In");
-		snd_soc_dapm_disable_pin(codec, "Headset Mic");
-		snd_soc_dapm_disable_pin(codec, "Call Mic");
-		break;
-	case NEO_STEREO_TO_HEADPHONES:
-		snd_soc_dapm_enable_pin(codec, "Audio Out");
-		snd_soc_dapm_disable_pin(codec, "GSM Line Out");
-		snd_soc_dapm_disable_pin(codec, "GSM Line In");
-		snd_soc_dapm_disable_pin(codec, "Headset Mic");
-		snd_soc_dapm_disable_pin(codec, "Call Mic");
-		break;
-	case NEO_CAPTURE_HANDSET:
-		snd_soc_dapm_disable_pin(codec, "Audio Out");
-		snd_soc_dapm_disable_pin(codec, "GSM Line Out");
-		snd_soc_dapm_disable_pin(codec, "GSM Line In");
-		snd_soc_dapm_disable_pin(codec, "Headset Mic");
-		snd_soc_dapm_enable_pin(codec, "Call Mic");
-		break;
-	case NEO_CAPTURE_HEADSET:
-		snd_soc_dapm_disable_pin(codec, "Audio Out");
-		snd_soc_dapm_disable_pin(codec, "GSM Line Out");
-		snd_soc_dapm_disable_pin(codec, "GSM Line In");
-		snd_soc_dapm_enable_pin(codec, "Headset Mic");
-		snd_soc_dapm_disable_pin(codec, "Call Mic");
-		break;
-	case NEO_CAPTURE_BLUETOOTH:
-		snd_soc_dapm_disable_pin(codec, "Audio Out");
-		snd_soc_dapm_disable_pin(codec, "GSM Line Out");
-		snd_soc_dapm_disable_pin(codec, "GSM Line In");
-		snd_soc_dapm_disable_pin(codec, "Headset Mic");
-		snd_soc_dapm_disable_pin(codec, "Call Mic");
-		break;
-	default:
-		snd_soc_dapm_disable_pin(codec, "Audio Out");
-		snd_soc_dapm_disable_pin(codec, "GSM Line Out");
-		snd_soc_dapm_disable_pin(codec, "GSM Line In");
-		snd_soc_dapm_disable_pin(codec, "Headset Mic");
-		snd_soc_dapm_disable_pin(codec, "Call Mic");
-	}
-
-	snd_soc_dapm_sync(codec);
-
-	return 0;
-}
-
-static int neo1973_set_scenario(struct snd_kcontrol *kcontrol,
-	struct snd_ctl_elem_value *ucontrol)
-{
-	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-
-	pr_debug("Entered %s\n", __func__);
-
-	if (neo1973_scenario == ucontrol->value.integer.value[0])
-		return 0;
-
-	neo1973_scenario = ucontrol->value.integer.value[0];
-	set_scenario_endpoints(codec, neo1973_scenario);
-	return 1;
-}
-
-static u8 lm4857_regs[4] = {0x00, 0x40, 0x80, 0xC0};
-
-static void lm4857_write_regs(void)
-{
-	pr_debug("Entered %s\n", __func__);
-
-	if (i2c_master_send(i2c, lm4857_regs, 4) != 4)
-		printk(KERN_ERR "lm4857: i2c write failed\n");
-}
-
-static int lm4857_get_reg(struct snd_kcontrol *kcontrol,
-	struct snd_ctl_elem_value *ucontrol)
-{
-	struct soc_mixer_control *mc =
-		(struct soc_mixer_control *)kcontrol->private_value;
-	int reg = mc->reg;
-	int shift = mc->shift;
-	int mask = mc->max;
-
-	pr_debug("Entered %s\n", __func__);
-
-	ucontrol->value.integer.value[0] = (lm4857_regs[reg] >> shift) & mask;
-	return 0;
-}
-
-static int lm4857_set_reg(struct snd_kcontrol *kcontrol,
-	struct snd_ctl_elem_value *ucontrol)
-{
-	struct soc_mixer_control *mc =
-		(struct soc_mixer_control *)kcontrol->private_value;
-	int reg = mc->reg;
-	int shift = mc->shift;
-	int mask = mc->max;
-
-	if (((lm4857_regs[reg] >> shift) & mask) ==
-		ucontrol->value.integer.value[0])
-		return 0;
-
-	lm4857_regs[reg] &= ~(mask << shift);
-	lm4857_regs[reg] |= ucontrol->value.integer.value[0] << shift;
-	lm4857_write_regs();
-	return 1;
-}
-
-static int lm4857_get_mode(struct snd_kcontrol *kcontrol,
-	struct snd_ctl_elem_value *ucontrol)
-{
-	u8 value = lm4857_regs[LM4857_CTRL] & 0x0F;
-
-	pr_debug("Entered %s\n", __func__);
-
-	if (value)
-		value -= 5;
-
-	ucontrol->value.integer.value[0] = value;
-	return 0;
-}
-
-static int lm4857_set_mode(struct snd_kcontrol *kcontrol,
-	struct snd_ctl_elem_value *ucontrol)
-{
-	u8 value = ucontrol->value.integer.value[0];
-
-	pr_debug("Entered %s\n", __func__);
-
-	if (value)
-		value += 5;
-
-	if ((lm4857_regs[LM4857_CTRL] & 0x0F) == value)
-		return 0;
-
-	lm4857_regs[LM4857_CTRL] &= 0xF0;
-	lm4857_regs[LM4857_CTRL] |= value;
-	lm4857_write_regs();
-	return 1;
-}
-
-static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = {
-	SND_SOC_DAPM_LINE("Audio Out", NULL),
-	SND_SOC_DAPM_LINE("GSM Line Out", NULL),
-	SND_SOC_DAPM_LINE("GSM Line In", NULL),
-	SND_SOC_DAPM_MIC("Headset Mic", NULL),
-	SND_SOC_DAPM_MIC("Call Mic", NULL),
-};
-
-
-static const struct snd_soc_dapm_route dapm_routes[] = {
-
-	/* Connections to the lm4857 amp */
-	{"Audio Out", NULL, "LOUT1"},
-	{"Audio Out", NULL, "ROUT1"},
-
-	/* Connections to the GSM Module */
-	{"GSM Line Out", NULL, "MONO1"},
-	{"GSM Line Out", NULL, "MONO2"},
-	{"RXP", NULL, "GSM Line In"},
-	{"RXN", NULL, "GSM Line In"},
-
-	/* Connections to Headset */
-	{"MIC1", NULL, "Mic Bias"},
-	{"Mic Bias", NULL, "Headset Mic"},
-
-	/* Call Mic */
-	{"MIC2", NULL, "Mic Bias"},
-	{"MIC2N", NULL, "Mic Bias"},
-	{"Mic Bias", NULL, "Call Mic"},
-
-	/* Connect the ALC pins */
-	{"ACIN", NULL, "ACOP"},
-};
-
-static const char *lm4857_mode[] = {
-	"Off",
-	"Call Speaker",
-	"Stereo Speakers",
-	"Stereo Speakers + Headphones",
-	"Headphones"
-};
-
-static const struct soc_enum lm4857_mode_enum[] = {
-	SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(lm4857_mode), lm4857_mode),
-};
-
-static const char *neo_scenarios[] = {
-	"Off",
-	"GSM Handset",
-	"GSM Headset",
-	"GSM Bluetooth",
-	"Speakers",
-	"Headphones",
-	"Capture Handset",
-	"Capture Headset",
-	"Capture Bluetooth"
-};
-
-static const struct soc_enum neo_scenario_enum[] = {
-	SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(neo_scenarios), neo_scenarios),
-};
-
-static const DECLARE_TLV_DB_SCALE(stereo_tlv, -4050, 150, 0);
-static const DECLARE_TLV_DB_SCALE(mono_tlv, -3450, 150, 0);
-
-static const struct snd_kcontrol_new wm8753_neo1973_controls[] = {
-	SOC_SINGLE_EXT_TLV("Amp Left Playback Volume", LM4857_LVOL, 0, 31, 0,
-		lm4857_get_reg, lm4857_set_reg, stereo_tlv),
-	SOC_SINGLE_EXT_TLV("Amp Right Playback Volume", LM4857_RVOL, 0, 31, 0,
-		lm4857_get_reg, lm4857_set_reg, stereo_tlv),
-	SOC_SINGLE_EXT_TLV("Amp Mono Playback Volume", LM4857_MVOL, 0, 31, 0,
-		lm4857_get_reg, lm4857_set_reg, mono_tlv),
-	SOC_ENUM_EXT("Amp Mode", lm4857_mode_enum[0],
-		lm4857_get_mode, lm4857_set_mode),
-	SOC_ENUM_EXT("Neo Mode", neo_scenario_enum[0],
-		neo1973_get_scenario, neo1973_set_scenario),
-	SOC_SINGLE_EXT("Amp Spk 3D Playback Switch", LM4857_LVOL, 5, 1, 0,
-		lm4857_get_reg, lm4857_set_reg),
-	SOC_SINGLE_EXT("Amp HP 3d Playback Switch", LM4857_RVOL, 5, 1, 0,
-		lm4857_get_reg, lm4857_set_reg),
-	SOC_SINGLE_EXT("Amp Fast Wakeup Playback Switch", LM4857_CTRL, 5, 1, 0,
-		lm4857_get_reg, lm4857_set_reg),
-	SOC_SINGLE_EXT("Amp Earpiece 6dB Playback Switch", LM4857_CTRL, 4, 1, 0,
-		lm4857_get_reg, lm4857_set_reg),
-};
-
-/*
- * This is an example machine initialisation for a wm8753 connected to a
- * neo1973 II. It is missing logic to detect hp/mic insertions and logic
- * to re-route the audio in such an event.
- */
-static int neo1973_wm8753_init(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_soc_codec *codec = rtd->codec;
-	int err;
-
-	pr_debug("Entered %s\n", __func__);
-
-	/* set up NC codec pins */
-	snd_soc_dapm_nc_pin(codec, "LOUT2");
-	snd_soc_dapm_nc_pin(codec, "ROUT2");
-	snd_soc_dapm_nc_pin(codec, "OUT3");
-	snd_soc_dapm_nc_pin(codec, "OUT4");
-	snd_soc_dapm_nc_pin(codec, "LINE1");
-	snd_soc_dapm_nc_pin(codec, "LINE2");
-
-	/* Add neo1973 specific widgets */
-	snd_soc_dapm_new_controls(codec, wm8753_dapm_widgets,
-				  ARRAY_SIZE(wm8753_dapm_widgets));
-
-	/* set endpoints to default mode */
-	set_scenario_endpoints(codec, NEO_AUDIO_OFF);
-
-	/* add neo1973 specific controls */
-	err = snd_soc_add_controls(codec, wm8753_neo1973_controls,
-				ARRAY_SIZE(8753_neo1973_controls));
-	if (err < 0)
-		return err;
-
-	/* set up neo1973 specific audio routes */
-	err = snd_soc_dapm_add_routes(codec, dapm_routes,
-				      ARRAY_SIZE(dapm_routes));
-
-	snd_soc_dapm_sync(codec);
-	return 0;
-}
-
-/*
- * BT Codec DAI
- */
-static struct snd_soc_dai bt_dai = {
-	.name = "bluetooth-dai",
-	.playback = {
-		.channels_min = 1,
-		.channels_max = 1,
-		.rates = SNDRV_PCM_RATE_8000,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
-	.capture = {
-		.channels_min = 1,
-		.channels_max = 1,
-		.rates = SNDRV_PCM_RATE_8000,
-		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
-};
-
-static struct snd_soc_dai_link neo1973_dai[] = {
-{ /* Hifi Playback - for similatious use with voice below */
-	.name = "WM8753",
-	.stream_name = "WM8753 HiFi",
-	.platform_name = "samsung-audio",
-	.cpu_dai_name = "s3c24xx-i2s",
-	.codec_dai_name = "wm8753-hifi",
-	.codec_name = "wm8753-codec.0-0x1a",
-	.init = neo1973_wm8753_init,
-	.ops = &neo1973_hifi_ops,
-},
-{ /* Voice via BT */
-	.name = "Bluetooth",
-	.stream_name = "Voice",
-	.platform_name = "samsung-audio",
-	.cpu_dai_name = "bluetooth-dai",
-	.codec_dai_name = "wm8753-voice",
-	.codec_name = "wm8753-codec.0-0x1a",
-	.ops = &neo1973_voice_ops,
-},
-};
-
-static struct snd_soc_card neo1973 = {
-	.name = "neo1973",
-	.dai_link = neo1973_dai,
-	.num_links = ARRAY_SIZE(neo1973_dai),
-};
-
-static int lm4857_i2c_probe(struct i2c_client *client,
-			    const struct i2c_device_id *id)
-{
-	pr_debug("Entered %s\n", __func__);
-
-	i2c = client;
-
-	lm4857_write_regs();
-	return 0;
-}
-
-static int lm4857_i2c_remove(struct i2c_client *client)
-{
-	pr_debug("Entered %s\n", __func__);
-
-	i2c = NULL;
-
-	return 0;
-}
-
-static u8 lm4857_state;
-
-static int lm4857_suspend(struct i2c_client *dev, pm_message_t state)
-{
-	pr_debug("Entered %s\n", __func__);
-
-	dev_dbg(&dev->dev, "lm4857_suspend\n");
-	lm4857_state = lm4857_regs[LM4857_CTRL] & 0xf;
-	if (lm4857_state) {
-		lm4857_regs[LM4857_CTRL] &= 0xf0;
-		lm4857_write_regs();
-	}
-	return 0;
-}
-
-static int lm4857_resume(struct i2c_client *dev)
-{
-	pr_debug("Entered %s\n", __func__);
-
-	if (lm4857_state) {
-		lm4857_regs[LM4857_CTRL] |= (lm4857_state & 0x0f);
-		lm4857_write_regs();
-	}
-	return 0;
-}
-
-static void lm4857_shutdown(struct i2c_client *dev)
-{
-	pr_debug("Entered %s\n", __func__);
-
-	dev_dbg(&dev->dev, "lm4857_shutdown\n");
-	lm4857_regs[LM4857_CTRL] &= 0xf0;
-	lm4857_write_regs();
-}
-
-static const struct i2c_device_id lm4857_i2c_id[] = {
-	{ "neo1973_lm4857", 0 },
-	{ }
-};
-
-static struct i2c_driver lm4857_i2c_driver = {
-	.driver = {
-		.name = "LM4857 I2C Amp",
-		.owner = THIS_MODULE,
-	},
-	.suspend =        lm4857_suspend,
-	.resume	=         lm4857_resume,
-	.shutdown =       lm4857_shutdown,
-	.probe =          lm4857_i2c_probe,
-	.remove =         lm4857_i2c_remove,
-	.id_table =       lm4857_i2c_id,
-};
-
-static struct platform_device *neo1973_snd_device;
-
-static int __init neo1973_init(void)
-{
-	int ret;
-
-	pr_debug("Entered %s\n", __func__);
-
-	if (!machine_is_neo1973_gta01()) {
-		printk(KERN_INFO
-			"Only GTA01 hardware supported by ASoC driver\n");
-		return -ENODEV;
-	}
-
-	neo1973_snd_device = platform_device_alloc("soc-audio", -1);
-	if (!neo1973_snd_device)
-		return -ENOMEM;
-
-	platform_set_drvdata(neo1973_snd_device, &neo1973);
-	ret = platform_device_add(neo1973_snd_device);
-
-	if (ret) {
-		platform_device_put(neo1973_snd_device);
-		return ret;
-	}
-
-	ret = i2c_add_driver(&lm4857_i2c_driver);
-
-	if (ret != 0)
-		platform_device_unregister(neo1973_snd_device);
-
-	return ret;
-}
-
-static void __exit neo1973_exit(void)
-{
-	pr_debug("Entered %s\n", __func__);
-
-	i2c_del_driver(&lm4857_i2c_driver);
-	platform_device_unregister(neo1973_snd_device);
-}
-
-module_init(neo1973_init);
-module_exit(neo1973_exit);
-
-/* Module information */
-MODULE_AUTHOR("Graeme Gregory, graeme@openmoko.org, www.openmoko.org");
-MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/pcm.c b/sound/soc/s3c24xx/pcm.c
deleted file mode 100644
index 4d0f6e4..0000000
--- a/sound/soc/s3c24xx/pcm.c
+++ /dev/null
@@ -1,552 +0,0 @@
-/* sound/soc/s3c24xx/pcm.c
- *
- * ALSA SoC Audio Layer - S3C PCM-Controller driver
- *
- * Copyright (c) 2009 Samsung Electronics Co. Ltd
- * Author: Jaswinder Singh <jassi.brar@samsung.com>
- * based upon I2S drivers by Ben Dooks.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-
-#include <plat/audio.h>
-#include <plat/dma.h>
-
-#include "dma.h"
-#include "pcm.h"
-
-static struct s3c2410_dma_client s3c_pcm_dma_client_out = {
-	.name		= "PCM Stereo out"
-};
-
-static struct s3c2410_dma_client s3c_pcm_dma_client_in = {
-	.name		= "PCM Stereo in"
-};
-
-static struct s3c_dma_params s3c_pcm_stereo_out[] = {
-	[0] = {
-		.client		= &s3c_pcm_dma_client_out,
-		.dma_size	= 4,
-	},
-	[1] = {
-		.client		= &s3c_pcm_dma_client_out,
-		.dma_size	= 4,
-	},
-};
-
-static struct s3c_dma_params s3c_pcm_stereo_in[] = {
-	[0] = {
-		.client		= &s3c_pcm_dma_client_in,
-		.dma_size	= 4,
-	},
-	[1] = {
-		.client		= &s3c_pcm_dma_client_in,
-		.dma_size	= 4,
-	},
-};
-
-static struct s3c_pcm_info s3c_pcm[2];
-
-static void s3c_pcm_snd_txctrl(struct s3c_pcm_info *pcm, int on)
-{
-	void __iomem *regs = pcm->regs;
-	u32 ctl, clkctl;
-
-	clkctl = readl(regs + S3C_PCM_CLKCTL);
-	ctl = readl(regs + S3C_PCM_CTL);
-	ctl &= ~(S3C_PCM_CTL_TXDIPSTICK_MASK
-			 << S3C_PCM_CTL_TXDIPSTICK_SHIFT);
-
-	if (on) {
-		ctl |= S3C_PCM_CTL_TXDMA_EN;
-		ctl |= S3C_PCM_CTL_TXFIFO_EN;
-		ctl |= S3C_PCM_CTL_ENABLE;
-		ctl |= (0x4<<S3C_PCM_CTL_TXDIPSTICK_SHIFT);
-		clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
-	} else {
-		ctl &= ~S3C_PCM_CTL_TXDMA_EN;
-		ctl &= ~S3C_PCM_CTL_TXFIFO_EN;
-
-		if (!(ctl & S3C_PCM_CTL_RXFIFO_EN)) {
-			ctl &= ~S3C_PCM_CTL_ENABLE;
-			if (!pcm->idleclk)
-				clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
-		}
-	}
-
-	writel(clkctl, regs + S3C_PCM_CLKCTL);
-	writel(ctl, regs + S3C_PCM_CTL);
-}
-
-static void s3c_pcm_snd_rxctrl(struct s3c_pcm_info *pcm, int on)
-{
-	void __iomem *regs = pcm->regs;
-	u32 ctl, clkctl;
-
-	ctl = readl(regs + S3C_PCM_CTL);
-	clkctl = readl(regs + S3C_PCM_CLKCTL);
-	ctl &= ~(S3C_PCM_CTL_RXDIPSTICK_MASK
-			 << S3C_PCM_CTL_RXDIPSTICK_SHIFT);
-
-	if (on) {
-		ctl |= S3C_PCM_CTL_RXDMA_EN;
-		ctl |= S3C_PCM_CTL_RXFIFO_EN;
-		ctl |= S3C_PCM_CTL_ENABLE;
-		ctl |= (0x20<<S3C_PCM_CTL_RXDIPSTICK_SHIFT);
-		clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
-	} else {
-		ctl &= ~S3C_PCM_CTL_RXDMA_EN;
-		ctl &= ~S3C_PCM_CTL_RXFIFO_EN;
-
-		if (!(ctl & S3C_PCM_CTL_TXFIFO_EN)) {
-			ctl &= ~S3C_PCM_CTL_ENABLE;
-			if (!pcm->idleclk)
-				clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
-		}
-	}
-
-	writel(clkctl, regs + S3C_PCM_CLKCTL);
-	writel(ctl, regs + S3C_PCM_CTL);
-}
-
-static int s3c_pcm_trigger(struct snd_pcm_substream *substream, int cmd,
-			       struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(rtd->cpu_dai);
-	unsigned long flags;
-
-	dev_dbg(pcm->dev, "Entered %s\n", __func__);
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-	case SNDRV_PCM_TRIGGER_RESUME:
-	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		spin_lock_irqsave(&pcm->lock, flags);
-
-		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
-			s3c_pcm_snd_rxctrl(pcm, 1);
-		else
-			s3c_pcm_snd_txctrl(pcm, 1);
-
-		spin_unlock_irqrestore(&pcm->lock, flags);
-		break;
-
-	case SNDRV_PCM_TRIGGER_STOP:
-	case SNDRV_PCM_TRIGGER_SUSPEND:
-	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		spin_lock_irqsave(&pcm->lock, flags);
-
-		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
-			s3c_pcm_snd_rxctrl(pcm, 0);
-		else
-			s3c_pcm_snd_txctrl(pcm, 0);
-
-		spin_unlock_irqrestore(&pcm->lock, flags);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int s3c_pcm_hw_params(struct snd_pcm_substream *substream,
-				 struct snd_pcm_hw_params *params,
-				 struct snd_soc_dai *socdai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(rtd->cpu_dai);
-	struct s3c_dma_params *dma_data;
-	void __iomem *regs = pcm->regs;
-	struct clk *clk;
-	int sclk_div, sync_div;
-	unsigned long flags;
-	u32 clkctl;
-
-	dev_dbg(pcm->dev, "Entered %s\n", __func__);
-
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		dma_data = pcm->dma_playback;
-	else
-		dma_data = pcm->dma_capture;
-
-	snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data);
-
-	/* Strictly check for sample size */
-	switch (params_format(params)) {
-	case SNDRV_PCM_FORMAT_S16_LE:
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&pcm->lock, flags);
-
-	/* Get hold of the PCMSOURCE_CLK */
-	clkctl = readl(regs + S3C_PCM_CLKCTL);
-	if (clkctl & S3C_PCM_CLKCTL_SERCLKSEL_PCLK)
-		clk = pcm->pclk;
-	else
-		clk = pcm->cclk;
-
-	/* Set the SCLK divider */
-	sclk_div = clk_get_rate(clk) / pcm->sclk_per_fs /
-					params_rate(params) / 2 - 1;
-
-	clkctl &= ~(S3C_PCM_CLKCTL_SCLKDIV_MASK
-			<< S3C_PCM_CLKCTL_SCLKDIV_SHIFT);
-	clkctl |= ((sclk_div & S3C_PCM_CLKCTL_SCLKDIV_MASK)
-			<< S3C_PCM_CLKCTL_SCLKDIV_SHIFT);
-
-	/* Set the SYNC divider */
-	sync_div = pcm->sclk_per_fs - 1;
-
-	clkctl &= ~(S3C_PCM_CLKCTL_SYNCDIV_MASK
-				<< S3C_PCM_CLKCTL_SYNCDIV_SHIFT);
-	clkctl |= ((sync_div & S3C_PCM_CLKCTL_SYNCDIV_MASK)
-				<< S3C_PCM_CLKCTL_SYNCDIV_SHIFT);
-
-	writel(clkctl, regs + S3C_PCM_CLKCTL);
-
-	spin_unlock_irqrestore(&pcm->lock, flags);
-
-	dev_dbg(pcm->dev, "PCMSOURCE_CLK-%lu SCLK=%ufs SCLK_DIV=%d SYNC_DIV=%d\n",
-				clk_get_rate(clk), pcm->sclk_per_fs,
-				sclk_div, sync_div);
-
-	return 0;
-}
-
-static int s3c_pcm_set_fmt(struct snd_soc_dai *cpu_dai,
-			       unsigned int fmt)
-{
-	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai);
-	void __iomem *regs = pcm->regs;
-	unsigned long flags;
-	int ret = 0;
-	u32 ctl;
-
-	dev_dbg(pcm->dev, "Entered %s\n", __func__);
-
-	spin_lock_irqsave(&pcm->lock, flags);
-
-	ctl = readl(regs + S3C_PCM_CTL);
-
-	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
-	case SND_SOC_DAIFMT_NB_NF:
-		/* Nothing to do, NB_NF by default */
-		break;
-	default:
-		dev_err(pcm->dev, "Unsupported clock inversion!\n");
-		ret = -EINVAL;
-		goto exit;
-	}
-
-	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
-	case SND_SOC_DAIFMT_CBS_CFS:
-		/* Nothing to do, Master by default */
-		break;
-	default:
-		dev_err(pcm->dev, "Unsupported master/slave format!\n");
-		ret = -EINVAL;
-		goto exit;
-	}
-
-	switch (fmt & SND_SOC_DAIFMT_CLOCK_MASK) {
-	case SND_SOC_DAIFMT_CONT:
-		pcm->idleclk = 1;
-		break;
-	case SND_SOC_DAIFMT_GATED:
-		pcm->idleclk = 0;
-		break;
-	default:
-		dev_err(pcm->dev, "Invalid Clock gating request!\n");
-		ret = -EINVAL;
-		goto exit;
-	}
-
-	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
-	case SND_SOC_DAIFMT_DSP_A:
-		ctl |= S3C_PCM_CTL_TXMSB_AFTER_FSYNC;
-		ctl |= S3C_PCM_CTL_RXMSB_AFTER_FSYNC;
-		break;
-	case SND_SOC_DAIFMT_DSP_B:
-		ctl &= ~S3C_PCM_CTL_TXMSB_AFTER_FSYNC;
-		ctl &= ~S3C_PCM_CTL_RXMSB_AFTER_FSYNC;
-		break;
-	default:
-		dev_err(pcm->dev, "Unsupported data format!\n");
-		ret = -EINVAL;
-		goto exit;
-	}
-
-	writel(ctl, regs + S3C_PCM_CTL);
-
-exit:
-	spin_unlock_irqrestore(&pcm->lock, flags);
-
-	return ret;
-}
-
-static int s3c_pcm_set_clkdiv(struct snd_soc_dai *cpu_dai,
-						int div_id, int div)
-{
-	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai);
-
-	switch (div_id) {
-	case S3C_PCM_SCLK_PER_FS:
-		pcm->sclk_per_fs = div;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int s3c_pcm_set_sysclk(struct snd_soc_dai *cpu_dai,
-				  int clk_id, unsigned int freq, int dir)
-{
-	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai);
-	void __iomem *regs = pcm->regs;
-	u32 clkctl = readl(regs + S3C_PCM_CLKCTL);
-
-	switch (clk_id) {
-	case S3C_PCM_CLKSRC_PCLK:
-		clkctl |= S3C_PCM_CLKCTL_SERCLKSEL_PCLK;
-		break;
-
-	case S3C_PCM_CLKSRC_MUX:
-		clkctl &= ~S3C_PCM_CLKCTL_SERCLKSEL_PCLK;
-
-		if (clk_get_rate(pcm->cclk) != freq)
-			clk_set_rate(pcm->cclk, freq);
-
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	writel(clkctl, regs + S3C_PCM_CLKCTL);
-
-	return 0;
-}
-
-static struct snd_soc_dai_ops s3c_pcm_dai_ops = {
-	.set_sysclk	= s3c_pcm_set_sysclk,
-	.set_clkdiv	= s3c_pcm_set_clkdiv,
-	.trigger	= s3c_pcm_trigger,
-	.hw_params	= s3c_pcm_hw_params,
-	.set_fmt	= s3c_pcm_set_fmt,
-};
-
-#define S3C_PCM_RATES  SNDRV_PCM_RATE_8000_96000
-
-#define S3C_PCM_DAI_DECLARE			\
-	.symmetric_rates = 1,					\
-	.ops = &s3c_pcm_dai_ops,				\
-	.playback = {						\
-		.channels_min	= 2,				\
-		.channels_max	= 2,				\
-		.rates		= S3C_PCM_RATES,		\
-		.formats	= SNDRV_PCM_FMTBIT_S16_LE,	\
-	},							\
-	.capture = {						\
-		.channels_min	= 2,				\
-		.channels_max	= 2,				\
-		.rates		= S3C_PCM_RATES,		\
-		.formats	= SNDRV_PCM_FMTBIT_S16_LE,	\
-	}
-
-struct snd_soc_dai_driver s3c_pcm_dai[] = {
-	[0] = {
-		.name	= "samsung-pcm.0",
-		S3C_PCM_DAI_DECLARE,
-	},
-	[1] = {
-		.name	= "samsung-pcm.1",
-		S3C_PCM_DAI_DECLARE,
-	},
-};
-EXPORT_SYMBOL_GPL(s3c_pcm_dai);
-
-static __devinit int s3c_pcm_dev_probe(struct platform_device *pdev)
-{
-	struct s3c_pcm_info *pcm;
-	struct resource *mem_res, *dmatx_res, *dmarx_res;
-	struct s3c_audio_pdata *pcm_pdata;
-	int ret;
-
-	/* Check for valid device index */
-	if ((pdev->id < 0) || pdev->id >= ARRAY_SIZE(s3c_pcm)) {
-		dev_err(&pdev->dev, "id %d out of range\n", pdev->id);
-		return -EINVAL;
-	}
-
-	pcm_pdata = pdev->dev.platform_data;
-
-	/* Check for availability of necessary resource */
-	dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	if (!dmatx_res) {
-		dev_err(&pdev->dev, "Unable to get PCM-TX dma resource\n");
-		return -ENXIO;
-	}
-
-	dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-	if (!dmarx_res) {
-		dev_err(&pdev->dev, "Unable to get PCM-RX dma resource\n");
-		return -ENXIO;
-	}
-
-	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem_res) {
-		dev_err(&pdev->dev, "Unable to get register resource\n");
-		return -ENXIO;
-	}
-
-	if (pcm_pdata && pcm_pdata->cfg_gpio && pcm_pdata->cfg_gpio(pdev)) {
-		dev_err(&pdev->dev, "Unable to configure gpio\n");
-		return -EINVAL;
-	}
-
-	pcm = &s3c_pcm[pdev->id];
-	pcm->dev = &pdev->dev;
-
-	spin_lock_init(&pcm->lock);
-
-	/* Default is 128fs */
-	pcm->sclk_per_fs = 128;
-
-	pcm->cclk = clk_get(&pdev->dev, "audio-bus");
-	if (IS_ERR(pcm->cclk)) {
-		dev_err(&pdev->dev, "failed to get audio-bus\n");
-		ret = PTR_ERR(pcm->cclk);
-		goto err1;
-	}
-	clk_enable(pcm->cclk);
-
-	/* record our pcm structure for later use in the callbacks */
-	dev_set_drvdata(&pdev->dev, pcm);
-
-	if (!request_mem_region(mem_res->start,
-				resource_size(mem_res), "samsung-pcm")) {
-		dev_err(&pdev->dev, "Unable to request register region\n");
-		ret = -EBUSY;
-		goto err2;
-	}
-
-	pcm->regs = ioremap(mem_res->start, 0x100);
-	if (pcm->regs == NULL) {
-		dev_err(&pdev->dev, "cannot ioremap registers\n");
-		ret = -ENXIO;
-		goto err3;
-	}
-
-	pcm->pclk = clk_get(&pdev->dev, "pcm");
-	if (IS_ERR(pcm->pclk)) {
-		dev_err(&pdev->dev, "failed to get pcm_clock\n");
-		ret = -ENOENT;
-		goto err4;
-	}
-	clk_enable(pcm->pclk);
-
-	ret = snd_soc_register_dai(&pdev->dev, &s3c_pcm_dai[pdev->id]);
-	if (ret != 0) {
-		dev_err(&pdev->dev, "failed to get pcm_clock\n");
-		goto err5;
-	}
-
-	s3c_pcm_stereo_in[pdev->id].dma_addr = mem_res->start
-							+ S3C_PCM_RXFIFO;
-	s3c_pcm_stereo_out[pdev->id].dma_addr = mem_res->start
-							+ S3C_PCM_TXFIFO;
-
-	s3c_pcm_stereo_in[pdev->id].channel = dmarx_res->start;
-	s3c_pcm_stereo_out[pdev->id].channel = dmatx_res->start;
-
-	pcm->dma_capture = &s3c_pcm_stereo_in[pdev->id];
-	pcm->dma_playback = &s3c_pcm_stereo_out[pdev->id];
-
-	return 0;
-
-err5:
-	clk_disable(pcm->pclk);
-	clk_put(pcm->pclk);
-err4:
-	iounmap(pcm->regs);
-err3:
-	release_mem_region(mem_res->start, resource_size(mem_res));
-err2:
-	clk_disable(pcm->cclk);
-	clk_put(pcm->cclk);
-err1:
-	return ret;
-}
-
-static __devexit int s3c_pcm_dev_remove(struct platform_device *pdev)
-{
-	struct s3c_pcm_info *pcm = &s3c_pcm[pdev->id];
-	struct resource *mem_res;
-
-	snd_soc_unregister_dai(&pdev->dev);
-
-	iounmap(pcm->regs);
-
-	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(mem_res->start, resource_size(mem_res));
-
-	clk_disable(pcm->cclk);
-	clk_disable(pcm->pclk);
-	clk_put(pcm->pclk);
-	clk_put(pcm->cclk);
-
-	return 0;
-}
-
-static struct platform_driver s3c_pcm_driver = {
-	.probe  = s3c_pcm_dev_probe,
-	.remove = s3c_pcm_dev_remove,
-	.driver = {
-		.name = "samsung-pcm",
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init s3c_pcm_init(void)
-{
-	return platform_driver_register(&s3c_pcm_driver);
-}
-module_init(s3c_pcm_init);
-
-static void __exit s3c_pcm_exit(void)
-{
-	platform_driver_unregister(&s3c_pcm_driver);
-}
-module_exit(s3c_pcm_exit);
-
-/* Module information */
-MODULE_AUTHOR("Jaswinder Singh, <jassi.brar@samsung.com>");
-MODULE_DESCRIPTION("S3C PCM Controller Driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:samsung-pcm");
diff --git a/sound/soc/s3c24xx/pcm.h b/sound/soc/s3c24xx/pcm.h
deleted file mode 100644
index 3775216..0000000
--- a/sound/soc/s3c24xx/pcm.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*  sound/soc/s3c24xx/pcm.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __S3C_PCM_H
-#define __S3C_PCM_H __FILE__
-
-/*Register Offsets */
-#define S3C_PCM_CTL	(0x00)
-#define S3C_PCM_CLKCTL	(0x04)
-#define S3C_PCM_TXFIFO	(0x08)
-#define S3C_PCM_RXFIFO	(0x0C)
-#define S3C_PCM_IRQCTL	(0x10)
-#define S3C_PCM_IRQSTAT	(0x14)
-#define S3C_PCM_FIFOSTAT	(0x18)
-#define S3C_PCM_CLRINT	(0x20)
-
-/* PCM_CTL Bit-Fields */
-#define S3C_PCM_CTL_TXDIPSTICK_MASK		(0x3f)
-#define S3C_PCM_CTL_TXDIPSTICK_SHIFT	(13)
-#define S3C_PCM_CTL_RXDIPSTICK_MASK		(0x3f)
-#define S3C_PCM_CTL_RXDIPSTICK_SHIFT	(7)
-#define S3C_PCM_CTL_TXDMA_EN		(0x1<<6)
-#define S3C_PCM_CTL_RXDMA_EN		(0x1<<5)
-#define S3C_PCM_CTL_TXMSB_AFTER_FSYNC	(0x1<<4)
-#define S3C_PCM_CTL_RXMSB_AFTER_FSYNC	(0x1<<3)
-#define S3C_PCM_CTL_TXFIFO_EN		(0x1<<2)
-#define S3C_PCM_CTL_RXFIFO_EN		(0x1<<1)
-#define S3C_PCM_CTL_ENABLE			(0x1<<0)
-
-/* PCM_CLKCTL Bit-Fields */
-#define S3C_PCM_CLKCTL_SERCLK_EN		(0x1<<19)
-#define S3C_PCM_CLKCTL_SERCLKSEL_PCLK	(0x1<<18)
-#define S3C_PCM_CLKCTL_SCLKDIV_MASK		(0x1ff)
-#define S3C_PCM_CLKCTL_SYNCDIV_MASK		(0x1ff)
-#define S3C_PCM_CLKCTL_SCLKDIV_SHIFT	(9)
-#define S3C_PCM_CLKCTL_SYNCDIV_SHIFT	(0)
-
-/* PCM_TXFIFO Bit-Fields */
-#define S3C_PCM_TXFIFO_DVALID	(0x1<<16)
-#define S3C_PCM_TXFIFO_DATA_MSK	(0xffff<<0)
-
-/* PCM_RXFIFO Bit-Fields */
-#define S3C_PCM_RXFIFO_DVALID	(0x1<<16)
-#define S3C_PCM_RXFIFO_DATA_MSK	(0xffff<<0)
-
-/* PCM_IRQCTL Bit-Fields */
-#define S3C_PCM_IRQCTL_IRQEN		(0x1<<14)
-#define S3C_PCM_IRQCTL_WRDEN		(0x1<<12)
-#define S3C_PCM_IRQCTL_TXEMPTYEN		(0x1<<11)
-#define S3C_PCM_IRQCTL_TXALMSTEMPTYEN	(0x1<<10)
-#define S3C_PCM_IRQCTL_TXFULLEN		(0x1<<9)
-#define S3C_PCM_IRQCTL_TXALMSTFULLEN	(0x1<<8)
-#define S3C_PCM_IRQCTL_TXSTARVEN		(0x1<<7)
-#define S3C_PCM_IRQCTL_TXERROVRFLEN		(0x1<<6)
-#define S3C_PCM_IRQCTL_RXEMPTEN		(0x1<<5)
-#define S3C_PCM_IRQCTL_RXALMSTEMPTEN	(0x1<<4)
-#define S3C_PCM_IRQCTL_RXFULLEN		(0x1<<3)
-#define S3C_PCM_IRQCTL_RXALMSTFULLEN	(0x1<<2)
-#define S3C_PCM_IRQCTL_RXSTARVEN		(0x1<<1)
-#define S3C_PCM_IRQCTL_RXERROVRFLEN		(0x1<<0)
-
-/* PCM_IRQSTAT Bit-Fields */
-#define S3C_PCM_IRQSTAT_IRQPND		(0x1<<13)
-#define S3C_PCM_IRQSTAT_WRD_XFER		(0x1<<12)
-#define S3C_PCM_IRQSTAT_TXEMPTY		(0x1<<11)
-#define S3C_PCM_IRQSTAT_TXALMSTEMPTY	(0x1<<10)
-#define S3C_PCM_IRQSTAT_TXFULL		(0x1<<9)
-#define S3C_PCM_IRQSTAT_TXALMSTFULL		(0x1<<8)
-#define S3C_PCM_IRQSTAT_TXSTARV		(0x1<<7)
-#define S3C_PCM_IRQSTAT_TXERROVRFL		(0x1<<6)
-#define S3C_PCM_IRQSTAT_RXEMPT		(0x1<<5)
-#define S3C_PCM_IRQSTAT_RXALMSTEMPT		(0x1<<4)
-#define S3C_PCM_IRQSTAT_RXFULL		(0x1<<3)
-#define S3C_PCM_IRQSTAT_RXALMSTFULL		(0x1<<2)
-#define S3C_PCM_IRQSTAT_RXSTARV		(0x1<<1)
-#define S3C_PCM_IRQSTAT_RXERROVRFL		(0x1<<0)
-
-/* PCM_FIFOSTAT Bit-Fields */
-#define S3C_PCM_FIFOSTAT_TXCNT_MSK		(0x3f<<14)
-#define S3C_PCM_FIFOSTAT_TXFIFOEMPTY	(0x1<<13)
-#define S3C_PCM_FIFOSTAT_TXFIFOALMSTEMPTY	(0x1<<12)
-#define S3C_PCM_FIFOSTAT_TXFIFOFULL		(0x1<<11)
-#define S3C_PCM_FIFOSTAT_TXFIFOALMSTFULL	(0x1<<10)
-#define S3C_PCM_FIFOSTAT_RXCNT_MSK		(0x3f<<4)
-#define S3C_PCM_FIFOSTAT_RXFIFOEMPTY	(0x1<<3)
-#define S3C_PCM_FIFOSTAT_RXFIFOALMSTEMPTY	(0x1<<2)
-#define S3C_PCM_FIFOSTAT_RXFIFOFULL		(0x1<<1)
-#define S3C_PCM_FIFOSTAT_RXFIFOALMSTFULL	(0x1<<0)
-
-#define S3C_PCM_CLKSRC_PCLK	0
-#define S3C_PCM_CLKSRC_MUX	1
-
-#define S3C_PCM_SCLK_PER_FS	0
-
-/**
- * struct s3c_pcm_info - S3C PCM Controller information
- * @dev: The parent device passed to use from the probe.
- * @regs: The pointer to the device register block.
- * @dma_playback: DMA information for playback channel.
- * @dma_capture: DMA information for capture channel.
- */
-struct s3c_pcm_info {
-	spinlock_t lock;
-	struct device	*dev;
-	void __iomem	*regs;
-
-	unsigned int sclk_per_fs;
-
-	/* Whether to keep PCMSCLK enabled even when idle(no active xfer) */
-	unsigned int idleclk;
-
-	struct clk	*pclk;
-	struct clk	*cclk;
-
-	struct s3c_dma_params	*dma_playback;
-	struct s3c_dma_params	*dma_capture;
-};
-
-#endif /* __S3C_PCM_H */
diff --git a/sound/soc/s3c24xx/regs-i2s-v2.h b/sound/soc/s3c24xx/regs-i2s-v2.h
deleted file mode 100644
index 5e5e568..0000000
--- a/sound/soc/s3c24xx/regs-i2s-v2.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h
- *
- * Copyright 2007 Simtec Electronics <linux@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 IIS register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H
-#define __ASM_ARCH_REGS_S3C2412_IIS_H
-
-#define S3C2412_IISCON			(0x00)
-#define S3C2412_IISMOD			(0x04)
-#define S3C2412_IISFIC			(0x08)
-#define S3C2412_IISPSR			(0x0C)
-#define S3C2412_IISTXD			(0x10)
-#define S3C2412_IISRXD			(0x14)
-
-#define S5PC1XX_IISFICS		0x18
-#define S5PC1XX_IISTXDS		0x1C
-
-#define S5PC1XX_IISCON_SW_RST		(1 << 31)
-#define S5PC1XX_IISCON_FRXOFSTATUS	(1 << 26)
-#define S5PC1XX_IISCON_FRXORINTEN	(1 << 25)
-#define S5PC1XX_IISCON_FTXSURSTAT	(1 << 24)
-#define S5PC1XX_IISCON_FTXSURINTEN	(1 << 23)
-#define S5PC1XX_IISCON_TXSDMAPAUSE	(1 << 20)
-#define S5PC1XX_IISCON_TXSDMACTIVE	(1 << 18)
-
-#define S3C64XX_IISCON_FTXURSTATUS	(1 << 17)
-#define S3C64XX_IISCON_FTXURINTEN	(1 << 16)
-#define S3C64XX_IISCON_TXFIFO2_EMPTY	(1 << 15)
-#define S3C64XX_IISCON_TXFIFO1_EMPTY	(1 << 14)
-#define S3C64XX_IISCON_TXFIFO2_FULL	(1 << 13)
-#define S3C64XX_IISCON_TXFIFO1_FULL	(1 << 12)
-
-#define S3C2412_IISCON_LRINDEX		(1 << 11)
-#define S3C2412_IISCON_TXFIFO_EMPTY	(1 << 10)
-#define S3C2412_IISCON_RXFIFO_EMPTY	(1 << 9)
-#define S3C2412_IISCON_TXFIFO_FULL	(1 << 8)
-#define S3C2412_IISCON_RXFIFO_FULL	(1 << 7)
-#define S3C2412_IISCON_TXDMA_PAUSE	(1 << 6)
-#define S3C2412_IISCON_RXDMA_PAUSE	(1 << 5)
-#define S3C2412_IISCON_TXCH_PAUSE	(1 << 4)
-#define S3C2412_IISCON_RXCH_PAUSE	(1 << 3)
-#define S3C2412_IISCON_TXDMA_ACTIVE	(1 << 2)
-#define S3C2412_IISCON_RXDMA_ACTIVE	(1 << 1)
-#define S3C2412_IISCON_IIS_ACTIVE	(1 << 0)
-
-#define S5PC1XX_IISMOD_OPCLK_CDCLK_OUT	(0 << 30)
-#define S5PC1XX_IISMOD_OPCLK_CDCLK_IN	(1 << 30)
-#define S5PC1XX_IISMOD_OPCLK_BCLK_OUT	(2 << 30)
-#define S5PC1XX_IISMOD_OPCLK_PCLK	(3 << 30)
-#define S5PC1XX_IISMOD_OPCLK_MASK	(3 << 30)
-#define S5PC1XX_IISMOD_TXS_IDMA		(1 << 28) /* Sec_TXFIFO use I-DMA */
-#define S5PC1XX_IISMOD_BLCS_MASK	0x3
-#define S5PC1XX_IISMOD_BLCS_SHIFT	26
-#define S5PC1XX_IISMOD_BLCP_MASK	0x3
-#define S5PC1XX_IISMOD_BLCP_SHIFT	24
-
-#define S3C64XX_IISMOD_C2DD_HHALF	(1 << 21) /* Discard Higher-half */
-#define S3C64XX_IISMOD_C2DD_LHALF	(1 << 20) /* Discard Lower-half */
-#define S3C64XX_IISMOD_C1DD_HHALF	(1 << 19)
-#define S3C64XX_IISMOD_C1DD_LHALF	(1 << 18)
-#define S3C64XX_IISMOD_DC2_EN		(1 << 17)
-#define S3C64XX_IISMOD_DC1_EN		(1 << 16)
-#define S3C64XX_IISMOD_BLC_16BIT	(0 << 13)
-#define S3C64XX_IISMOD_BLC_8BIT		(1 << 13)
-#define S3C64XX_IISMOD_BLC_24BIT	(2 << 13)
-#define S3C64XX_IISMOD_BLC_MASK		(3 << 13)
-
-#define S3C2412_IISMOD_IMS_SYSMUX	(1 << 10)
-#define S3C2412_IISMOD_SLAVE		(1 << 11)
-#define S3C2412_IISMOD_MODE_TXONLY	(0 << 8)
-#define S3C2412_IISMOD_MODE_RXONLY	(1 << 8)
-#define S3C2412_IISMOD_MODE_TXRX	(2 << 8)
-#define S3C2412_IISMOD_MODE_MASK	(3 << 8)
-#define S3C2412_IISMOD_LR_LLOW		(0 << 7)
-#define S3C2412_IISMOD_LR_RLOW		(1 << 7)
-#define S3C2412_IISMOD_SDF_IIS		(0 << 5)
-#define S3C2412_IISMOD_SDF_MSB		(1 << 5)
-#define S3C2412_IISMOD_SDF_LSB		(2 << 5)
-#define S3C2412_IISMOD_SDF_MASK		(3 << 5)
-#define S3C2412_IISMOD_RCLK_256FS	(0 << 3)
-#define S3C2412_IISMOD_RCLK_512FS	(1 << 3)
-#define S3C2412_IISMOD_RCLK_384FS	(2 << 3)
-#define S3C2412_IISMOD_RCLK_768FS	(3 << 3)
-#define S3C2412_IISMOD_RCLK_MASK 	(3 << 3)
-#define S3C2412_IISMOD_BCLK_32FS	(0 << 1)
-#define S3C2412_IISMOD_BCLK_48FS	(1 << 1)
-#define S3C2412_IISMOD_BCLK_16FS	(2 << 1)
-#define S3C2412_IISMOD_BCLK_24FS	(3 << 1)
-#define S3C2412_IISMOD_BCLK_MASK	(3 << 1)
-#define S3C2412_IISMOD_8BIT		(1 << 0)
-
-#define S3C64XX_IISMOD_CDCLKCON		(1 << 12)
-
-#define S3C2412_IISPSR_PSREN		(1 << 15)
-
-#define S3C64XX_IISFIC_TX2COUNT(x)	(((x) >>  24) & 0xf)
-#define S3C64XX_IISFIC_TX1COUNT(x)	(((x) >>  16) & 0xf)
-
-#define S3C2412_IISFIC_TXFLUSH		(1 << 15)
-#define S3C2412_IISFIC_RXFLUSH		(1 << 7)
-#define S3C2412_IISFIC_TXCOUNT(x)	(((x) >>  8) & 0xf)
-#define S3C2412_IISFIC_RXCOUNT(x)	(((x) >>  0) & 0xf)
-
-#define S5PC1XX_IISFICS_TXFLUSH		(1 << 15)
-#define S5PC1XX_IISFICS_TXCOUNT(x)	(((x) >>  8) & 0x7f)
-
-#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */
diff --git a/sound/soc/s3c24xx/rx1950_uda1380.c b/sound/soc/s3c24xx/rx1950_uda1380.c
deleted file mode 100644
index 07197ee..0000000
--- a/sound/soc/s3c24xx/rx1950_uda1380.c
+++ /dev/null
@@ -1,333 +0,0 @@
-/*
- * rx1950.c  --  ALSA Soc Audio Layer
- *
- * Copyright (c) 2010 Vasily Khoruzhick <anarsoul@gmail.com>
- *
- * Based on smdk2440.c and magician.c
- *
- * Authors: Graeme Gregory graeme.gregory@wolfsonmicro.com
- *          Philipp Zabel <philipp.zabel@gmail.com>
- *          Denis Grigoriev <dgreenday@gmail.com>
- *          Vasily Khoruzhick <anarsoul@gmail.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-
-#include <sound/soc.h>
-#include <sound/soc-dapm.h>
-#include <sound/uda1380.h>
-#include <sound/jack.h>
-
-#include <plat/regs-iis.h>
-
-#include <mach/regs-clock.h>
-
-#include <asm/mach-types.h>
-
-#include "dma.h"
-#include "s3c24xx-i2s.h"
-#include "../codecs/uda1380.h"
-
-static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd);
-static int rx1950_startup(struct snd_pcm_substream *substream);
-static int rx1950_hw_params(struct snd_pcm_substream *substream,
-				struct snd_pcm_hw_params *params);
-static int rx1950_spk_power(struct snd_soc_dapm_widget *w,
-				struct snd_kcontrol *kcontrol, int event);
-
-static unsigned int rates[] = {
-	16000,
-	44100,
-	48000,
-	88200,
-};
-
-static struct snd_pcm_hw_constraint_list hw_rates = {
-	.count = ARRAY_SIZE(rates),
-	.list = rates,
-	.mask = 0,
-};
-
-static struct snd_soc_jack hp_jack;
-
-static struct snd_soc_jack_pin hp_jack_pins[] = {
-	{
-		.pin	= "Headphone Jack",
-		.mask	= SND_JACK_HEADPHONE,
-	},
-	{
-		.pin	= "Speaker",
-		.mask	= SND_JACK_HEADPHONE,
-		.invert	= 1,
-	},
-};
-
-static struct snd_soc_jack_gpio hp_jack_gpios[] = {
-	[0] = {
-		.gpio			= S3C2410_GPG(12),
-		.name			= "hp-gpio",
-		.report			= SND_JACK_HEADPHONE,
-		.invert			= 1,
-		.debounce_time		= 200,
-	},
-};
-
-static struct snd_soc_ops rx1950_ops = {
-	.startup	= rx1950_startup,
-	.hw_params	= rx1950_hw_params,
-};
-
-/* s3c24xx digital audio interface glue - connects codec <--> CPU */
-static struct snd_soc_dai_link rx1950_uda1380_dai[] = {
-	{
-		.name		= "uda1380",
-		.stream_name	= "UDA1380 Duplex",
-		.cpu_dai_name	= "s3c24xx-iis",
-		.codec_dai_name	= "uda1380-hifi",
-		.init		= rx1950_uda1380_init,
-		.platform_name	= "samsung-audio",
-		.codec_name	= "uda1380-codec.0-001a",
-		.ops		= &rx1950_ops,
-	},
-};
-
-static struct snd_soc_card rx1950_asoc = {
-	.name = "rx1950",
-	.dai_link = rx1950_uda1380_dai,
-	.num_links = ARRAY_SIZE(rx1950_uda1380_dai),
-};
-
-/* rx1950 machine dapm widgets */
-static const struct snd_soc_dapm_widget uda1380_dapm_widgets[] = {
-	SND_SOC_DAPM_HP("Headphone Jack", NULL),
-	SND_SOC_DAPM_MIC("Mic Jack", NULL),
-	SND_SOC_DAPM_SPK("Speaker", rx1950_spk_power),
-};
-
-/* rx1950 machine audio_map */
-static const struct snd_soc_dapm_route audio_map[] = {
-	/* headphone connected to VOUTLHP, VOUTRHP */
-	{"Headphone Jack", NULL, "VOUTLHP"},
-	{"Headphone Jack", NULL, "VOUTRHP"},
-
-	/* ext speaker connected to VOUTL, VOUTR  */
-	{"Speaker", NULL, "VOUTL"},
-	{"Speaker", NULL, "VOUTR"},
-
-	/* mic is connected to VINM */
-	{"VINM", NULL, "Mic Jack"},
-};
-
-static struct platform_device *s3c24xx_snd_device;
-static struct clk *xtal;
-
-static int rx1950_startup(struct snd_pcm_substream *substream)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-
-	runtime->hw.rate_min = hw_rates.list[0];
-	runtime->hw.rate_max = hw_rates.list[hw_rates.count - 1];
-	runtime->hw.rates = SNDRV_PCM_RATE_KNOT;
-
-	return snd_pcm_hw_constraint_list(runtime, 0,
-					SNDRV_PCM_HW_PARAM_RATE,
-					&hw_rates);
-}
-
-static int rx1950_spk_power(struct snd_soc_dapm_widget *w,
-				struct snd_kcontrol *kcontrol, int event)
-{
-	if (SND_SOC_DAPM_EVENT_ON(event))
-		gpio_set_value(S3C2410_GPA(1), 1);
-	else
-		gpio_set_value(S3C2410_GPA(1), 0);
-
-	return 0;
-}
-
-static int rx1950_hw_params(struct snd_pcm_substream *substream,
-				struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	int div;
-	int ret;
-	unsigned int rate = params_rate(params);
-	int clk_source, fs_mode;
-
-	switch (rate) {
-	case 16000:
-	case 48000:
-		clk_source = S3C24XX_CLKSRC_PCLK;
-		fs_mode = S3C2410_IISMOD_256FS;
-		div = s3c24xx_i2s_get_clockrate() / (256 * rate);
-		if (s3c24xx_i2s_get_clockrate() % (256 * rate) > (128 * rate))
-			div++;
-		break;
-	case 44100:
-	case 88200:
-		clk_source = S3C24XX_CLKSRC_MPLL;
-		fs_mode = S3C2410_IISMOD_256FS;
-		div = clk_get_rate(xtal) / (256 * rate);
-		if (clk_get_rate(xtal) % (256 * rate) > (128 * rate))
-			div++;
-		break;
-	default:
-		printk(KERN_ERR "%s: rate %d is not supported\n",
-			__func__, rate);
-		return -EINVAL;
-	}
-
-	/* set codec DAI configuration */
-	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
-		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
-	if (ret < 0)
-		return ret;
-
-	/* set cpu DAI configuration */
-	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
-		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
-	if (ret < 0)
-		return ret;
-
-	/* select clock source */
-	ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source, rate,
-			SND_SOC_CLOCK_OUT);
-	if (ret < 0)
-		return ret;
-
-	/* set MCLK division for sample rate */
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
-		S3C2410_IISMOD_384FS);
-	if (ret < 0)
-		return ret;
-
-	/* set BCLK division for sample rate */
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK,
-		S3C2410_IISMOD_32FS);
-	if (ret < 0)
-		return ret;
-
-	/* set prescaler division for sample rate */
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
-		S3C24XX_PRESCALE(div, div));
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_soc_codec *codec = rtd->codec;
-	int err;
-
-	/* Add rx1950 specific widgets */
-	err = snd_soc_dapm_new_controls(codec, uda1380_dapm_widgets,
-				  ARRAY_SIZE(uda1380_dapm_widgets));
-
-	if (err)
-		return err;
-
-	/* Set up rx1950 specific audio path audio_mapnects */
-	err = snd_soc_dapm_add_routes(codec, audio_map,
-				      ARRAY_SIZE(audio_map));
-
-	if (err)
-		return err;
-
-	snd_soc_dapm_enable_pin(codec, "Headphone Jack");
-	snd_soc_dapm_enable_pin(codec, "Speaker");
-
-	snd_soc_dapm_sync(codec);
-
-	snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE,
-		&hp_jack);
-
-	snd_soc_jack_add_pins(&hp_jack, ARRAY_SIZE(hp_jack_pins),
-		hp_jack_pins);
-
-	snd_soc_jack_add_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
-		hp_jack_gpios);
-
-	return 0;
-}
-
-static int __init rx1950_init(void)
-{
-	int ret;
-
-	if (!machine_is_rx1950())
-		return -ENODEV;
-
-	/* configure some gpios */
-	ret = gpio_request(S3C2410_GPA(1), "speaker-power");
-	if (ret)
-		goto err_gpio;
-
-	ret = gpio_direction_output(S3C2410_GPA(1), 0);
-	if (ret)
-		goto err_gpio_conf;
-
-	s3c24xx_snd_device = platform_device_alloc("soc-audio", -1);
-	if (!s3c24xx_snd_device) {
-		ret = -ENOMEM;
-		goto err_plat_alloc;
-	}
-
-	platform_set_drvdata(s3c24xx_snd_device, &rx1950_asoc);
-	ret = platform_device_add(s3c24xx_snd_device);
-
-	if (ret) {
-		platform_device_put(s3c24xx_snd_device);
-		goto err_plat_add;
-	}
-
-	xtal = clk_get(&s3c24xx_snd_device->dev, "xtal");
-
-	if (IS_ERR(xtal)) {
-		ret = PTR_ERR(xtal);
-		platform_device_unregister(s3c24xx_snd_device);
-		goto err_clk;
-	}
-
-	return 0;
-
-err_clk:
-err_plat_add:
-err_plat_alloc:
-err_gpio_conf:
-	gpio_free(S3C2410_GPA(1));
-
-err_gpio:
-	return ret;
-}
-
-static void __exit rx1950_exit(void)
-{
-	platform_device_unregister(s3c24xx_snd_device);
-	snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
-		hp_jack_gpios);
-	clk_put(xtal);
-	gpio_free(S3C2410_GPA(1));
-}
-
-module_init(rx1950_init);
-module_exit(rx1950_exit);
-
-/* Module information */
-MODULE_AUTHOR("Vasily Khoruzhick");
-MODULE_DESCRIPTION("ALSA SoC RX1950");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c
deleted file mode 100644
index c471431..0000000
--- a/sound/soc/s3c24xx/s3c-i2s-v2.c
+++ /dev/null
@@ -1,757 +0,0 @@
-/* sound/soc/s3c24xx/s3c-i2c-v2.c
- *
- * ALSA Soc Audio Layer - I2S core for newer Samsung SoCs.
- *
- * Copyright (c) 2006 Wolfson Microelectronics PLC.
- *	Graeme Gregory graeme.gregory@wolfsonmicro.com
- *	linux@wolfsonmicro.com
- *
- * Copyright (c) 2008, 2007, 2004-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-
-#include <mach/dma.h>
-
-#include "regs-i2s-v2.h"
-#include "s3c-i2s-v2.h"
-#include "dma.h"
-
-#undef S3C_IIS_V2_SUPPORTED
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) \
-	|| defined(CONFIG_CPU_S5PV210)
-#define S3C_IIS_V2_SUPPORTED
-#endif
-
-#ifdef CONFIG_PLAT_S3C64XX
-#define S3C_IIS_V2_SUPPORTED
-#endif
-
-#ifndef S3C_IIS_V2_SUPPORTED
-#error Unsupported CPU model
-#endif
-
-#define S3C2412_I2S_DEBUG_CON 0
-
-static inline struct s3c_i2sv2_info *to_info(struct snd_soc_dai *cpu_dai)
-{
-	return snd_soc_dai_get_drvdata(cpu_dai);
-}
-
-#define bit_set(v, b) (((v) & (b)) ? 1 : 0)
-
-#if S3C2412_I2S_DEBUG_CON
-static void dbg_showcon(const char *fn, u32 con)
-{
-	printk(KERN_DEBUG "%s: LRI=%d, TXFEMPT=%d, RXFEMPT=%d, TXFFULL=%d, RXFFULL=%d\n", fn,
-	       bit_set(con, S3C2412_IISCON_LRINDEX),
-	       bit_set(con, S3C2412_IISCON_TXFIFO_EMPTY),
-	       bit_set(con, S3C2412_IISCON_RXFIFO_EMPTY),
-	       bit_set(con, S3C2412_IISCON_TXFIFO_FULL),
-	       bit_set(con, S3C2412_IISCON_RXFIFO_FULL));
-
-	printk(KERN_DEBUG "%s: PAUSE: TXDMA=%d, RXDMA=%d, TXCH=%d, RXCH=%d\n",
-	       fn,
-	       bit_set(con, S3C2412_IISCON_TXDMA_PAUSE),
-	       bit_set(con, S3C2412_IISCON_RXDMA_PAUSE),
-	       bit_set(con, S3C2412_IISCON_TXCH_PAUSE),
-	       bit_set(con, S3C2412_IISCON_RXCH_PAUSE));
-	printk(KERN_DEBUG "%s: ACTIVE: TXDMA=%d, RXDMA=%d, IIS=%d\n", fn,
-	       bit_set(con, S3C2412_IISCON_TXDMA_ACTIVE),
-	       bit_set(con, S3C2412_IISCON_RXDMA_ACTIVE),
-	       bit_set(con, S3C2412_IISCON_IIS_ACTIVE));
-}
-#else
-static inline void dbg_showcon(const char *fn, u32 con)
-{
-}
-#endif
-
-
-/* Turn on or off the transmission path. */
-static void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on)
-{
-	void __iomem *regs = i2s->regs;
-	u32 fic, con, mod;
-
-	pr_debug("%s(%d)\n", __func__, on);
-
-	fic = readl(regs + S3C2412_IISFIC);
-	con = readl(regs + S3C2412_IISCON);
-	mod = readl(regs + S3C2412_IISMOD);
-
-	pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
-
-	if (on) {
-		con |= S3C2412_IISCON_TXDMA_ACTIVE | S3C2412_IISCON_IIS_ACTIVE;
-		con &= ~S3C2412_IISCON_TXDMA_PAUSE;
-		con &= ~S3C2412_IISCON_TXCH_PAUSE;
-
-		switch (mod & S3C2412_IISMOD_MODE_MASK) {
-		case S3C2412_IISMOD_MODE_TXONLY:
-		case S3C2412_IISMOD_MODE_TXRX:
-			/* do nothing, we are in the right mode */
-			break;
-
-		case S3C2412_IISMOD_MODE_RXONLY:
-			mod &= ~S3C2412_IISMOD_MODE_MASK;
-			mod |= S3C2412_IISMOD_MODE_TXRX;
-			break;
-
-		default:
-			dev_err(i2s->dev, "TXEN: Invalid MODE %x in IISMOD\n",
-				mod & S3C2412_IISMOD_MODE_MASK);
-			break;
-		}
-
-		writel(con, regs + S3C2412_IISCON);
-		writel(mod, regs + S3C2412_IISMOD);
-	} else {
-		/* Note, we do not have any indication that the FIFO problems
-		 * tha the S3C2410/2440 had apply here, so we should be able
-		 * to disable the DMA and TX without resetting the FIFOS.
-		 */
-
-		con |=  S3C2412_IISCON_TXDMA_PAUSE;
-		con |=  S3C2412_IISCON_TXCH_PAUSE;
-		con &= ~S3C2412_IISCON_TXDMA_ACTIVE;
-
-		switch (mod & S3C2412_IISMOD_MODE_MASK) {
-		case S3C2412_IISMOD_MODE_TXRX:
-			mod &= ~S3C2412_IISMOD_MODE_MASK;
-			mod |= S3C2412_IISMOD_MODE_RXONLY;
-			break;
-
-		case S3C2412_IISMOD_MODE_TXONLY:
-			mod &= ~S3C2412_IISMOD_MODE_MASK;
-			con &= ~S3C2412_IISCON_IIS_ACTIVE;
-			break;
-
-		default:
-			dev_err(i2s->dev, "TXDIS: Invalid MODE %x in IISMOD\n",
-				mod & S3C2412_IISMOD_MODE_MASK);
-			break;
-		}
-
-		writel(mod, regs + S3C2412_IISMOD);
-		writel(con, regs + S3C2412_IISCON);
-	}
-
-	fic = readl(regs + S3C2412_IISFIC);
-	dbg_showcon(__func__, con);
-	pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
-}
-
-static void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on)
-{
-	void __iomem *regs = i2s->regs;
-	u32 fic, con, mod;
-
-	pr_debug("%s(%d)\n", __func__, on);
-
-	fic = readl(regs + S3C2412_IISFIC);
-	con = readl(regs + S3C2412_IISCON);
-	mod = readl(regs + S3C2412_IISMOD);
-
-	pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
-
-	if (on) {
-		con |= S3C2412_IISCON_RXDMA_ACTIVE | S3C2412_IISCON_IIS_ACTIVE;
-		con &= ~S3C2412_IISCON_RXDMA_PAUSE;
-		con &= ~S3C2412_IISCON_RXCH_PAUSE;
-
-		switch (mod & S3C2412_IISMOD_MODE_MASK) {
-		case S3C2412_IISMOD_MODE_TXRX:
-		case S3C2412_IISMOD_MODE_RXONLY:
-			/* do nothing, we are in the right mode */
-			break;
-
-		case S3C2412_IISMOD_MODE_TXONLY:
-			mod &= ~S3C2412_IISMOD_MODE_MASK;
-			mod |= S3C2412_IISMOD_MODE_TXRX;
-			break;
-
-		default:
-			dev_err(i2s->dev, "RXEN: Invalid MODE %x in IISMOD\n",
-				mod & S3C2412_IISMOD_MODE_MASK);
-		}
-
-		writel(mod, regs + S3C2412_IISMOD);
-		writel(con, regs + S3C2412_IISCON);
-	} else {
-		/* See txctrl notes on FIFOs. */
-
-		con &= ~S3C2412_IISCON_RXDMA_ACTIVE;
-		con |=  S3C2412_IISCON_RXDMA_PAUSE;
-		con |=  S3C2412_IISCON_RXCH_PAUSE;
-
-		switch (mod & S3C2412_IISMOD_MODE_MASK) {
-		case S3C2412_IISMOD_MODE_RXONLY:
-			con &= ~S3C2412_IISCON_IIS_ACTIVE;
-			mod &= ~S3C2412_IISMOD_MODE_MASK;
-			break;
-
-		case S3C2412_IISMOD_MODE_TXRX:
-			mod &= ~S3C2412_IISMOD_MODE_MASK;
-			mod |= S3C2412_IISMOD_MODE_TXONLY;
-			break;
-
-		default:
-			dev_err(i2s->dev, "RXDIS: Invalid MODE %x in IISMOD\n",
-				mod & S3C2412_IISMOD_MODE_MASK);
-		}
-
-		writel(con, regs + S3C2412_IISCON);
-		writel(mod, regs + S3C2412_IISMOD);
-	}
-
-	fic = readl(regs + S3C2412_IISFIC);
-	pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
-}
-
-#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
-
-/*
- * Wait for the LR signal to allow synchronisation to the L/R clock
- * from the codec. May only be needed for slave mode.
- */
-static int s3c2412_snd_lrsync(struct s3c_i2sv2_info *i2s)
-{
-	u32 iiscon;
-	unsigned long loops = msecs_to_loops(5);
-
-	pr_debug("Entered %s\n", __func__);
-
-	while (--loops) {
-		iiscon = readl(i2s->regs + S3C2412_IISCON);
-		if (iiscon & S3C2412_IISCON_LRINDEX)
-			break;
-
-		cpu_relax();
-	}
-
-	if (!loops) {
-		printk(KERN_ERR "%s: timeout\n", __func__);
-		return -ETIMEDOUT;
-	}
-
-	return 0;
-}
-
-/*
- * Set S3C2412 I2S DAI format
- */
-static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
-			       unsigned int fmt)
-{
-	struct s3c_i2sv2_info *i2s = to_info(cpu_dai);
-	u32 iismod;
-
-	pr_debug("Entered %s\n", __func__);
-
-	iismod = readl(i2s->regs + S3C2412_IISMOD);
-	pr_debug("hw_params r: IISMOD: %x \n", iismod);
-
-	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
-	case SND_SOC_DAIFMT_CBM_CFM:
-		i2s->master = 0;
-		iismod |= S3C2412_IISMOD_SLAVE;
-		break;
-	case SND_SOC_DAIFMT_CBS_CFS:
-		i2s->master = 1;
-		iismod &= ~S3C2412_IISMOD_SLAVE;
-		break;
-	default:
-		pr_err("unknwon master/slave format\n");
-		return -EINVAL;
-	}
-
-	iismod &= ~S3C2412_IISMOD_SDF_MASK;
-
-	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
-	case SND_SOC_DAIFMT_RIGHT_J:
-		iismod |= S3C2412_IISMOD_LR_RLOW;
-		iismod |= S3C2412_IISMOD_SDF_MSB;
-		break;
-	case SND_SOC_DAIFMT_LEFT_J:
-		iismod |= S3C2412_IISMOD_LR_RLOW;
-		iismod |= S3C2412_IISMOD_SDF_LSB;
-		break;
-	case SND_SOC_DAIFMT_I2S:
-		iismod &= ~S3C2412_IISMOD_LR_RLOW;
-		iismod |= S3C2412_IISMOD_SDF_IIS;
-		break;
-	default:
-		pr_err("Unknown data format\n");
-		return -EINVAL;
-	}
-
-	writel(iismod, i2s->regs + S3C2412_IISMOD);
-	pr_debug("hw_params w: IISMOD: %x \n", iismod);
-	return 0;
-}
-
-static int s3c_i2sv2_hw_params(struct snd_pcm_substream *substream,
-				 struct snd_pcm_hw_params *params,
-				 struct snd_soc_dai *dai)
-{
-	struct s3c_i2sv2_info *i2s = to_info(dai);
-	struct s3c_dma_params *dma_data;
-	u32 iismod;
-
-	pr_debug("Entered %s\n", __func__);
-
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		dma_data = i2s->dma_playback;
-	else
-		dma_data = i2s->dma_capture;
-
-	snd_soc_dai_set_dma_data(dai, substream, dma_data);
-
-	/* Working copies of register */
-	iismod = readl(i2s->regs + S3C2412_IISMOD);
-	pr_debug("%s: r: IISMOD: %x\n", __func__, iismod);
-
-	iismod &= ~S3C64XX_IISMOD_BLC_MASK;
-	/* Sample size */
-	switch (params_format(params)) {
-	case SNDRV_PCM_FORMAT_S8:
-		iismod |= S3C64XX_IISMOD_BLC_8BIT;
-		break;
-	case SNDRV_PCM_FORMAT_S16_LE:
-		break;
-	case SNDRV_PCM_FORMAT_S24_LE:
-		iismod |= S3C64XX_IISMOD_BLC_24BIT;
-		break;
-	}
-
-	writel(iismod, i2s->regs + S3C2412_IISMOD);
-	pr_debug("%s: w: IISMOD: %x\n", __func__, iismod);
-
-	return 0;
-}
-
-static int s3c_i2sv2_set_sysclk(struct snd_soc_dai *cpu_dai,
-				  int clk_id, unsigned int freq, int dir)
-{
-	struct s3c_i2sv2_info *i2s = to_info(cpu_dai);
-	u32 iismod = readl(i2s->regs + S3C2412_IISMOD);
-
-	pr_debug("Entered %s\n", __func__);
-	pr_debug("%s r: IISMOD: %x\n", __func__, iismod);
-
-	switch (clk_id) {
-	case S3C_I2SV2_CLKSRC_PCLK:
-		iismod &= ~S3C2412_IISMOD_IMS_SYSMUX;
-		break;
-
-	case S3C_I2SV2_CLKSRC_AUDIOBUS:
-		iismod |= S3C2412_IISMOD_IMS_SYSMUX;
-		break;
-
-	case S3C_I2SV2_CLKSRC_CDCLK:
-		/* Error if controller doesn't have the CDCLKCON bit */
-		if (!(i2s->feature & S3C_FEATURE_CDCLKCON))
-			return -EINVAL;
-
-		switch (dir) {
-		case SND_SOC_CLOCK_IN:
-			iismod |= S3C64XX_IISMOD_CDCLKCON;
-			break;
-		case SND_SOC_CLOCK_OUT:
-			iismod &= ~S3C64XX_IISMOD_CDCLKCON;
-			break;
-		default:
-			return -EINVAL;
-		}
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	writel(iismod, i2s->regs + S3C2412_IISMOD);
-	pr_debug("%s w: IISMOD: %x\n", __func__, iismod);
-
-	return 0;
-}
-
-static int s3c2412_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
-			       struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct s3c_i2sv2_info *i2s = to_info(rtd->cpu_dai);
-	int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
-	unsigned long irqs;
-	int ret = 0;
-	struct s3c_dma_params *dma_data =
-		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
-
-	pr_debug("Entered %s\n", __func__);
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-		/* On start, ensure that the FIFOs are cleared and reset. */
-
-		writel(capture ? S3C2412_IISFIC_RXFLUSH : S3C2412_IISFIC_TXFLUSH,
-		       i2s->regs + S3C2412_IISFIC);
-
-		/* clear again, just in case */
-		writel(0x0, i2s->regs + S3C2412_IISFIC);
-
-	case SNDRV_PCM_TRIGGER_RESUME:
-	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		if (!i2s->master) {
-			ret = s3c2412_snd_lrsync(i2s);
-			if (ret)
-				goto exit_err;
-		}
-
-		local_irq_save(irqs);
-
-		if (capture)
-			s3c2412_snd_rxctrl(i2s, 1);
-		else
-			s3c2412_snd_txctrl(i2s, 1);
-
-		local_irq_restore(irqs);
-
-		/*
-		 * Load the next buffer to DMA to meet the reqirement
-		 * of the auto reload mechanism of S3C24XX.
-		 * This call won't bother S3C64XX.
-		 */
-		s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
-
-		break;
-
-	case SNDRV_PCM_TRIGGER_STOP:
-	case SNDRV_PCM_TRIGGER_SUSPEND:
-	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		local_irq_save(irqs);
-
-		if (capture)
-			s3c2412_snd_rxctrl(i2s, 0);
-		else
-			s3c2412_snd_txctrl(i2s, 0);
-
-		local_irq_restore(irqs);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-
-exit_err:
-	return ret;
-}
-
-/*
- * Set S3C2412 Clock dividers
- */
-static int s3c2412_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai,
-				  int div_id, int div)
-{
-	struct s3c_i2sv2_info *i2s = to_info(cpu_dai);
-	u32 reg;
-
-	pr_debug("%s(%p, %d, %d)\n", __func__, cpu_dai, div_id, div);
-
-	switch (div_id) {
-	case S3C_I2SV2_DIV_BCLK:
-		switch (div) {
-		case 16:
-			div = S3C2412_IISMOD_BCLK_16FS;
-			break;
-
-		case 32:
-			div = S3C2412_IISMOD_BCLK_32FS;
-			break;
-
-		case 24:
-			div = S3C2412_IISMOD_BCLK_24FS;
-			break;
-
-		case 48:
-			div = S3C2412_IISMOD_BCLK_48FS;
-			break;
-
-		default:
-			return -EINVAL;
-		}
-
-		reg = readl(i2s->regs + S3C2412_IISMOD);
-		reg &= ~S3C2412_IISMOD_BCLK_MASK;
-		writel(reg | div, i2s->regs + S3C2412_IISMOD);
-
-		pr_debug("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD));
-		break;
-
-	case S3C_I2SV2_DIV_RCLK:
-		switch (div) {
-		case 256:
-			div = S3C2412_IISMOD_RCLK_256FS;
-			break;
-
-		case 384:
-			div = S3C2412_IISMOD_RCLK_384FS;
-			break;
-
-		case 512:
-			div = S3C2412_IISMOD_RCLK_512FS;
-			break;
-
-		case 768:
-			div = S3C2412_IISMOD_RCLK_768FS;
-			break;
-
-		default:
-			return -EINVAL;
-		}
-
-		reg = readl(i2s->regs + S3C2412_IISMOD);
-		reg &= ~S3C2412_IISMOD_RCLK_MASK;
-		writel(reg | div, i2s->regs + S3C2412_IISMOD);
-		pr_debug("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD));
-		break;
-
-	case S3C_I2SV2_DIV_PRESCALER:
-		if (div >= 0) {
-			writel((div << 8) | S3C2412_IISPSR_PSREN,
-			       i2s->regs + S3C2412_IISPSR);
-		} else {
-			writel(0x0, i2s->regs + S3C2412_IISPSR);
-		}
-		pr_debug("%s: PSR=%08x\n", __func__, readl(i2s->regs + S3C2412_IISPSR));
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static snd_pcm_sframes_t s3c2412_i2s_delay(struct snd_pcm_substream *substream,
-					   struct snd_soc_dai *dai)
-{
-	struct s3c_i2sv2_info *i2s = to_info(dai);
-	u32 reg = readl(i2s->regs + S3C2412_IISFIC);
-	snd_pcm_sframes_t delay;
-
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		delay = S3C2412_IISFIC_TXCOUNT(reg);
-	else
-		delay = S3C2412_IISFIC_RXCOUNT(reg);
-
-	return delay;
-}
-
-struct clk *s3c_i2sv2_get_clock(struct snd_soc_dai *cpu_dai)
-{
-	struct s3c_i2sv2_info *i2s = to_info(cpu_dai);
-	u32 iismod = readl(i2s->regs + S3C2412_IISMOD);
-
-	if (iismod & S3C2412_IISMOD_IMS_SYSMUX)
-		return i2s->iis_cclk;
-	else
-		return i2s->iis_pclk;
-}
-EXPORT_SYMBOL_GPL(s3c_i2sv2_get_clock);
-
-/* default table of all avaialable root fs divisors */
-static unsigned int iis_fs_tab[] = { 256, 512, 384, 768 };
-
-int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
-			    unsigned int *fstab,
-			    unsigned int rate, struct clk *clk)
-{
-	unsigned long clkrate = clk_get_rate(clk);
-	unsigned int div;
-	unsigned int fsclk;
-	unsigned int actual;
-	unsigned int fs;
-	unsigned int fsdiv;
-	signed int deviation = 0;
-	unsigned int best_fs = 0;
-	unsigned int best_div = 0;
-	unsigned int best_rate = 0;
-	unsigned int best_deviation = INT_MAX;
-
-	pr_debug("Input clock rate %ldHz\n", clkrate);
-
-	if (fstab == NULL)
-		fstab = iis_fs_tab;
-
-	for (fs = 0; fs < ARRAY_SIZE(iis_fs_tab); fs++) {
-		fsdiv = iis_fs_tab[fs];
-
-		fsclk = clkrate / fsdiv;
-		div = fsclk / rate;
-
-		if ((fsclk % rate) > (rate / 2))
-			div++;
-
-		if (div <= 1)
-			continue;
-
-		actual = clkrate / (fsdiv * div);
-		deviation = actual - rate;
-
-		printk(KERN_DEBUG "%ufs: div %u => result %u, deviation %d\n",
-		       fsdiv, div, actual, deviation);
-
-		deviation = abs(deviation);
-
-		if (deviation < best_deviation) {
-			best_fs = fsdiv;
-			best_div = div;
-			best_rate = actual;
-			best_deviation = deviation;
-		}
-
-		if (deviation == 0)
-			break;
-	}
-
-	printk(KERN_DEBUG "best: fs=%u, div=%u, rate=%u\n",
-	       best_fs, best_div, best_rate);
-
-	info->fs_div = best_fs;
-	info->clk_div = best_div;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_i2sv2_iis_calc_rate);
-
-int s3c_i2sv2_probe(struct snd_soc_dai *dai,
-		    struct s3c_i2sv2_info *i2s,
-		    unsigned long base)
-{
-	struct device *dev = dai->dev;
-	unsigned int iismod;
-
-	i2s->dev = dev;
-
-	/* record our i2s structure for later use in the callbacks */
-	snd_soc_dai_set_drvdata(dai, i2s);
-
-	i2s->regs = ioremap(base, 0x100);
-	if (i2s->regs == NULL) {
-		dev_err(dev, "cannot ioremap registers\n");
-		return -ENXIO;
-	}
-
-	i2s->iis_pclk = clk_get(dev, "iis");
-	if (IS_ERR(i2s->iis_pclk)) {
-		dev_err(dev, "failed to get iis_clock\n");
-		iounmap(i2s->regs);
-		return -ENOENT;
-	}
-
-	clk_enable(i2s->iis_pclk);
-
-	/* Mark ourselves as in TXRX mode so we can run through our cleanup
-	 * process without warnings. */
-	iismod = readl(i2s->regs + S3C2412_IISMOD);
-	iismod |= S3C2412_IISMOD_MODE_TXRX;
-	writel(iismod, i2s->regs + S3C2412_IISMOD);
-	s3c2412_snd_txctrl(i2s, 0);
-	s3c2412_snd_rxctrl(i2s, 0);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_i2sv2_probe);
-
-#ifdef CONFIG_PM
-static int s3c2412_i2s_suspend(struct snd_soc_dai *dai)
-{
-	struct s3c_i2sv2_info *i2s = to_info(dai);
-	u32 iismod;
-
-	if (dai->active) {
-		i2s->suspend_iismod = readl(i2s->regs + S3C2412_IISMOD);
-		i2s->suspend_iiscon = readl(i2s->regs + S3C2412_IISCON);
-		i2s->suspend_iispsr = readl(i2s->regs + S3C2412_IISPSR);
-
-		/* some basic suspend checks */
-
-		iismod = readl(i2s->regs + S3C2412_IISMOD);
-
-		if (iismod & S3C2412_IISCON_RXDMA_ACTIVE)
-			pr_warning("%s: RXDMA active?\n", __func__);
-
-		if (iismod & S3C2412_IISCON_TXDMA_ACTIVE)
-			pr_warning("%s: TXDMA active?\n", __func__);
-
-		if (iismod & S3C2412_IISCON_IIS_ACTIVE)
-			pr_warning("%s: IIS active\n", __func__);
-	}
-
-	return 0;
-}
-
-static int s3c2412_i2s_resume(struct snd_soc_dai *dai)
-{
-	struct s3c_i2sv2_info *i2s = to_info(dai);
-
-	pr_info("dai_active %d, IISMOD %08x, IISCON %08x\n",
-		dai->active, i2s->suspend_iismod, i2s->suspend_iiscon);
-
-	if (dai->active) {
-		writel(i2s->suspend_iiscon, i2s->regs + S3C2412_IISCON);
-		writel(i2s->suspend_iismod, i2s->regs + S3C2412_IISMOD);
-		writel(i2s->suspend_iispsr, i2s->regs + S3C2412_IISPSR);
-
-		writel(S3C2412_IISFIC_RXFLUSH | S3C2412_IISFIC_TXFLUSH,
-		       i2s->regs + S3C2412_IISFIC);
-
-		ndelay(250);
-		writel(0x0, i2s->regs + S3C2412_IISFIC);
-	}
-
-	return 0;
-}
-#else
-#define s3c2412_i2s_suspend NULL
-#define s3c2412_i2s_resume  NULL
-#endif
-
-int s3c_i2sv2_register_dai(struct device *dev, int id,
-		struct snd_soc_dai_driver *drv)
-{
-	struct snd_soc_dai_ops *ops = drv->ops;
-
-	ops->trigger = s3c2412_i2s_trigger;
-	if (!ops->hw_params)
-		ops->hw_params = s3c_i2sv2_hw_params;
-	ops->set_fmt = s3c2412_i2s_set_fmt;
-	ops->set_clkdiv = s3c2412_i2s_set_clkdiv;
-	ops->set_sysclk = s3c_i2sv2_set_sysclk;
-
-	/* Allow overriding by (for example) IISv4 */
-	if (!ops->delay)
-		ops->delay = s3c2412_i2s_delay;
-
-	drv->suspend = s3c2412_i2s_suspend;
-	drv->resume = s3c2412_i2s_resume;
-
-	return snd_soc_register_dai(dev, drv);
-}
-EXPORT_SYMBOL_GPL(s3c_i2sv2_register_dai);
-
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.h b/sound/soc/s3c24xx/s3c-i2s-v2.h
deleted file mode 100644
index d458301..0000000
--- a/sound/soc/s3c24xx/s3c-i2s-v2.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/* sound/soc/s3c24xx/s3c-i2s-v2.h
- *
- * ALSA Soc Audio Layer - S3C_I2SV2 I2S driver
- *
- * Copyright (c) 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
-*/
-
-/* This code is the core support for the I2S block found in a number of
- * Samsung SoC devices which is unofficially named I2S-V2. Currently the
- * S3C2412 and the S3C64XX series use this block to provide 1 or 2 I2S
- * channels via configurable GPIO.
- */
-
-#ifndef __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H
-#define __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H __FILE__
-
-#define S3C_I2SV2_DIV_BCLK	(1)
-#define S3C_I2SV2_DIV_RCLK	(2)
-#define S3C_I2SV2_DIV_PRESCALER	(3)
-
-#define S3C_I2SV2_CLKSRC_PCLK		0
-#define S3C_I2SV2_CLKSRC_AUDIOBUS	1
-#define S3C_I2SV2_CLKSRC_CDCLK		2
-
-/* Set this flag for I2S controllers that have the bit IISMOD[12]
- * bridge/break RCLK signal and external Xi2sCDCLK pin.
- */
-#define S3C_FEATURE_CDCLKCON	(1 << 0)
-
-/**
- * struct s3c_i2sv2_info - S3C I2S-V2 information
- * @dev: The parent device passed to use from the probe.
- * @regs: The pointer to the device registe block.
- * @feature: Set of bit-flags indicating features of the controller.
- * @master: True if the I2S core is the I2S bit clock master.
- * @dma_playback: DMA information for playback channel.
- * @dma_capture: DMA information for capture channel.
- * @suspend_iismod: PM save for the IISMOD register.
- * @suspend_iiscon: PM save for the IISCON register.
- * @suspend_iispsr: PM save for the IISPSR register.
- *
- * This is the private codec state for the hardware associated with an
- * I2S channel such as the register mappings and clock sources.
- */
-struct s3c_i2sv2_info {
-	struct device	*dev;
-	void __iomem	*regs;
-
-	u32		feature;
-
-	struct clk	*iis_pclk;
-	struct clk	*iis_cclk;
-
-	unsigned char	 master;
-
-	struct s3c_dma_params	*dma_playback;
-	struct s3c_dma_params	*dma_capture;
-
-	u32		 suspend_iismod;
-	u32		 suspend_iiscon;
-	u32		 suspend_iispsr;
-
-	unsigned long	base;
-};
-
-extern struct clk *s3c_i2sv2_get_clock(struct snd_soc_dai *cpu_dai);
-
-struct s3c_i2sv2_rate_calc {
-	unsigned int	clk_div;	/* for prescaler */
-	unsigned int	fs_div;		/* for root frame clock */
-};
-
-extern int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
-				   unsigned int *fstab,
-				   unsigned int rate, struct clk *clk);
-
-/**
- * s3c_i2sv2_probe - probe for i2s device helper
- * @dai: The ASoC DAI structure supplied to the original probe.
- * @i2s: Our local i2s structure to fill in.
- * @base: The base address for the registers.
- */
-extern int s3c_i2sv2_probe(struct snd_soc_dai *dai,
-			   struct s3c_i2sv2_info *i2s,
-			   unsigned long base);
-
-/**
- * s3c_i2sv2_register_dai - register dai with soc core
- * @dev: DAI device
- * @id: DAI ID
- * @drv: The driver structure to register
- *
- * Fill in any missing fields and then register the given dai with the
- * soc core.
- */
-extern int s3c_i2sv2_register_dai(struct device *dev, int id,
-		struct snd_soc_dai_driver *drv);
-
-#endif /* __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H */
diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c
deleted file mode 100644
index d953ff4..0000000
--- a/sound/soc/s3c24xx/s3c2412-i2s.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/* sound/soc/s3c24xx/s3c2412-i2s.c
- *
- * ALSA Soc Audio Layer - S3C2412 I2S driver
- *
- * Copyright (c) 2006 Wolfson Microelectronics PLC.
- *	Graeme Gregory graeme.gregory@wolfsonmicro.com
- *	linux@wolfsonmicro.com
- *
- * Copyright (c) 2007, 2004-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-#include <mach/hardware.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/dma.h>
-
-#include "dma.h"
-#include "regs-i2s-v2.h"
-#include "s3c2412-i2s.h"
-
-#define S3C2412_I2S_DEBUG 0
-
-static struct s3c2410_dma_client s3c2412_dma_client_out = {
-	.name		= "I2S PCM Stereo out"
-};
-
-static struct s3c2410_dma_client s3c2412_dma_client_in = {
-	.name		= "I2S PCM Stereo in"
-};
-
-static struct s3c_dma_params s3c2412_i2s_pcm_stereo_out = {
-	.client		= &s3c2412_dma_client_out,
-	.channel	= DMACH_I2S_OUT,
-	.dma_addr	= S3C2410_PA_IIS + S3C2412_IISTXD,
-	.dma_size	= 4,
-};
-
-static struct s3c_dma_params s3c2412_i2s_pcm_stereo_in = {
-	.client		= &s3c2412_dma_client_in,
-	.channel	= DMACH_I2S_IN,
-	.dma_addr	= S3C2410_PA_IIS + S3C2412_IISRXD,
-	.dma_size	= 4,
-};
-
-static struct s3c_i2sv2_info s3c2412_i2s;
-
-static int s3c2412_i2s_probe(struct snd_soc_dai *dai)
-{
-	int ret;
-
-	pr_debug("Entered %s\n", __func__);
-
-	ret = s3c_i2sv2_probe(dai, &s3c2412_i2s, S3C2410_PA_IIS);
-	if (ret)
-		return ret;
-
-	s3c2412_i2s.dma_capture = &s3c2412_i2s_pcm_stereo_in;
-	s3c2412_i2s.dma_playback = &s3c2412_i2s_pcm_stereo_out;
-
-	s3c2412_i2s.iis_cclk = clk_get(dai->dev, "i2sclk");
-	if (s3c2412_i2s.iis_cclk == NULL) {
-		pr_err("failed to get i2sclk clock\n");
-		iounmap(s3c2412_i2s.regs);
-		return -ENODEV;
-	}
-
-	/* Set MPLL as the source for IIS CLK */
-
-	clk_set_parent(s3c2412_i2s.iis_cclk, clk_get(NULL, "mpll"));
-	clk_enable(s3c2412_i2s.iis_cclk);
-
-	s3c2412_i2s.iis_cclk = s3c2412_i2s.iis_pclk;
-
-	/* Configure the I2S pins in correct mode */
-	s3c2410_gpio_cfgpin(S3C2410_GPE0, S3C2410_GPE0_I2SLRCK);
-	s3c2410_gpio_cfgpin(S3C2410_GPE1, S3C2410_GPE1_I2SSCLK);
-	s3c2410_gpio_cfgpin(S3C2410_GPE2, S3C2410_GPE2_CDCLK);
-	s3c2410_gpio_cfgpin(S3C2410_GPE3, S3C2410_GPE3_I2SSDI);
-	s3c2410_gpio_cfgpin(S3C2410_GPE4, S3C2410_GPE4_I2SSDO);
-
-	return 0;
-}
-
-static int s3c2412_i2s_remove(struct snd_soc_dai *dai)
-{
-	clk_disable(s3c2412_i2s.iis_cclk);
-	clk_put(s3c2412_i2s.iis_cclk);
-	iounmap(s3c2412_i2s.regs);
-
-	return 0;
-}
-
-static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream,
-				 struct snd_pcm_hw_params *params,
-				 struct snd_soc_dai *cpu_dai)
-{
-	struct s3c_i2sv2_info *i2s = snd_soc_dai_get_drvdata(cpu_dai);
-	struct s3c_dma_params *dma_data;
-	u32 iismod;
-
-	pr_debug("Entered %s\n", __func__);
-
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		dma_data = i2s->dma_playback;
-	else
-		dma_data = i2s->dma_capture;
-
-	snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
-
-	iismod = readl(i2s->regs + S3C2412_IISMOD);
-	pr_debug("%s: r: IISMOD: %x\n", __func__, iismod);
-
-	switch (params_format(params)) {
-	case SNDRV_PCM_FORMAT_S8:
-		iismod |= S3C2412_IISMOD_8BIT;
-		break;
-	case SNDRV_PCM_FORMAT_S16_LE:
-		iismod &= ~S3C2412_IISMOD_8BIT;
-		break;
-	}
-
-	writel(iismod, i2s->regs + S3C2412_IISMOD);
-	pr_debug("%s: w: IISMOD: %x\n", __func__, iismod);
-
-	return 0;
-}
-
-#define S3C2412_I2S_RATES \
-	(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
-	SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
-	SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
-
-static struct snd_soc_dai_ops s3c2412_i2s_dai_ops = {
-	.hw_params	= s3c2412_i2s_hw_params,
-};
-
-static struct snd_soc_dai_driver s3c2412_i2s_dai = {
-	.probe		= s3c2412_i2s_probe,
-	.remove	= s3c2412_i2s_remove,
-	.playback = {
-		.channels_min	= 2,
-		.channels_max	= 2,
-		.rates		= S3C2412_I2S_RATES,
-		.formats	= SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,
-	},
-	.capture = {
-		.channels_min	= 2,
-		.channels_max	= 2,
-		.rates		= S3C2412_I2S_RATES,
-		.formats	= SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,
-	},
-	.ops = &s3c2412_i2s_dai_ops,
-};
-
-static __devinit int s3c2412_iis_dev_probe(struct platform_device *pdev)
-{
-	return snd_soc_register_dai(&pdev->dev, &s3c2412_i2s_dai);
-}
-
-static __devexit int s3c2412_iis_dev_remove(struct platform_device *pdev)
-{
-	snd_soc_unregister_dai(&pdev->dev);
-	return 0;
-}
-
-static struct platform_driver s3c2412_iis_driver = {
-	.probe  = s3c2412_iis_dev_probe,
-	.remove = s3c2412_iis_dev_remove,
-	.driver = {
-		.name = "s3c2412-iis",
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init s3c2412_i2s_init(void)
-{
-	return platform_driver_register(&s3c2412_iis_driver);
-}
-module_init(s3c2412_i2s_init);
-
-static void __exit s3c2412_i2s_exit(void)
-{
-	platform_driver_unregister(&s3c2412_iis_driver);
-}
-module_exit(s3c2412_i2s_exit);
-
-/* Module information */
-MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("S3C2412 I2S SoC Interface");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:s3c2412-iis");
diff --git a/sound/soc/s3c24xx/s3c2412-i2s.h b/sound/soc/s3c24xx/s3c2412-i2s.h
deleted file mode 100644
index 01a0471..0000000
--- a/sound/soc/s3c24xx/s3c2412-i2s.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* sound/soc/s3c24xx/s3c2412-i2s.c
- *
- * ALSA Soc Audio Layer - S3C2412 I2S driver
- *
- * Copyright (c) 2007 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
-*/
-
-#ifndef __SND_SOC_S3C24XX_S3C2412_I2S_H
-#define __SND_SOC_S3C24XX_S3C2412_I2S_H __FILE__
-
-#include "s3c-i2s-v2.h"
-
-#define S3C2412_DIV_BCLK	S3C_I2SV2_DIV_BCLK
-#define S3C2412_DIV_RCLK	S3C_I2SV2_DIV_RCLK
-#define S3C2412_DIV_PRESCALER	S3C_I2SV2_DIV_PRESCALER
-
-#define S3C2412_CLKSRC_PCLK	S3C_I2SV2_CLKSRC_PCLK
-#define S3C2412_CLKSRC_I2SCLK	S3C_I2SV2_CLKSRC_AUDIOBUS
-
-#endif /* __SND_SOC_S3C24XX_S3C2412_I2S_H */
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c
deleted file mode 100644
index 13e41ed..0000000
--- a/sound/soc/s3c24xx/s3c24xx-i2s.c
+++ /dev/null
@@ -1,519 +0,0 @@
-/*
- * s3c24xx-i2s.c  --  ALSA Soc Audio Layer
- *
- * (c) 2006 Wolfson Microelectronics PLC.
- * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
- *
- * Copyright 2004-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/jiffies.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-
-#include <asm/dma.h>
-#include <mach/dma.h>
-
-#include <plat/regs-iis.h>
-
-#include "dma.h"
-#include "s3c24xx-i2s.h"
-
-static struct s3c2410_dma_client s3c24xx_dma_client_out = {
-	.name = "I2S PCM Stereo out"
-};
-
-static struct s3c2410_dma_client s3c24xx_dma_client_in = {
-	.name = "I2S PCM Stereo in"
-};
-
-static struct s3c_dma_params s3c24xx_i2s_pcm_stereo_out = {
-	.client		= &s3c24xx_dma_client_out,
-	.channel	= DMACH_I2S_OUT,
-	.dma_addr	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-	.dma_size	= 2,
-};
-
-static struct s3c_dma_params s3c24xx_i2s_pcm_stereo_in = {
-	.client		= &s3c24xx_dma_client_in,
-	.channel	= DMACH_I2S_IN,
-	.dma_addr	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-	.dma_size	= 2,
-};
-
-struct s3c24xx_i2s_info {
-	void __iomem	*regs;
-	struct clk	*iis_clk;
-	u32		iiscon;
-	u32		iismod;
-	u32		iisfcon;
-	u32		iispsr;
-};
-static struct s3c24xx_i2s_info s3c24xx_i2s;
-
-static void s3c24xx_snd_txctrl(int on)
-{
-	u32 iisfcon;
-	u32 iiscon;
-	u32 iismod;
-
-	pr_debug("Entered %s\n", __func__);
-
-	iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON);
-	iiscon  = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
-	iismod  = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
-
-	pr_debug("r: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
-
-	if (on) {
-		iisfcon |= S3C2410_IISFCON_TXDMA | S3C2410_IISFCON_TXENABLE;
-		iiscon  |= S3C2410_IISCON_TXDMAEN | S3C2410_IISCON_IISEN;
-		iiscon  &= ~S3C2410_IISCON_TXIDLE;
-		iismod  |= S3C2410_IISMOD_TXMODE;
-
-		writel(iismod,  s3c24xx_i2s.regs + S3C2410_IISMOD);
-		writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
-		writel(iiscon,  s3c24xx_i2s.regs + S3C2410_IISCON);
-	} else {
-		/* note, we have to disable the FIFOs otherwise bad things
-		 * seem to happen when the DMA stops. According to the
-		 * Samsung supplied kernel, this should allow the DMA
-		 * engine and FIFOs to reset. If this isn't allowed, the
-		 * DMA engine will simply freeze randomly.
-		 */
-
-		iisfcon &= ~S3C2410_IISFCON_TXENABLE;
-		iisfcon &= ~S3C2410_IISFCON_TXDMA;
-		iiscon  |=  S3C2410_IISCON_TXIDLE;
-		iiscon  &= ~S3C2410_IISCON_TXDMAEN;
-		iismod  &= ~S3C2410_IISMOD_TXMODE;
-
-		writel(iiscon,  s3c24xx_i2s.regs + S3C2410_IISCON);
-		writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
-		writel(iismod,  s3c24xx_i2s.regs + S3C2410_IISMOD);
-	}
-
-	pr_debug("w: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
-}
-
-static void s3c24xx_snd_rxctrl(int on)
-{
-	u32 iisfcon;
-	u32 iiscon;
-	u32 iismod;
-
-	pr_debug("Entered %s\n", __func__);
-
-	iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON);
-	iiscon  = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
-	iismod  = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
-
-	pr_debug("r: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
-
-	if (on) {
-		iisfcon |= S3C2410_IISFCON_RXDMA | S3C2410_IISFCON_RXENABLE;
-		iiscon  |= S3C2410_IISCON_RXDMAEN | S3C2410_IISCON_IISEN;
-		iiscon  &= ~S3C2410_IISCON_RXIDLE;
-		iismod  |= S3C2410_IISMOD_RXMODE;
-
-		writel(iismod,  s3c24xx_i2s.regs + S3C2410_IISMOD);
-		writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
-		writel(iiscon,  s3c24xx_i2s.regs + S3C2410_IISCON);
-	} else {
-		/* note, we have to disable the FIFOs otherwise bad things
-		 * seem to happen when the DMA stops. According to the
-		 * Samsung supplied kernel, this should allow the DMA
-		 * engine and FIFOs to reset. If this isn't allowed, the
-		 * DMA engine will simply freeze randomly.
-		 */
-
-		iisfcon &= ~S3C2410_IISFCON_RXENABLE;
-		iisfcon &= ~S3C2410_IISFCON_RXDMA;
-		iiscon  |= S3C2410_IISCON_RXIDLE;
-		iiscon  &= ~S3C2410_IISCON_RXDMAEN;
-		iismod  &= ~S3C2410_IISMOD_RXMODE;
-
-		writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
-		writel(iiscon,  s3c24xx_i2s.regs + S3C2410_IISCON);
-		writel(iismod,  s3c24xx_i2s.regs + S3C2410_IISMOD);
-	}
-
-	pr_debug("w: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
-}
-
-/*
- * Wait for the LR signal to allow synchronisation to the L/R clock
- * from the codec. May only be needed for slave mode.
- */
-static int s3c24xx_snd_lrsync(void)
-{
-	u32 iiscon;
-	int timeout = 50; /* 5ms */
-
-	pr_debug("Entered %s\n", __func__);
-
-	while (1) {
-		iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
-		if (iiscon & S3C2410_IISCON_LRINDEX)
-			break;
-
-		if (!timeout--)
-			return -ETIMEDOUT;
-		udelay(100);
-	}
-
-	return 0;
-}
-
-/*
- * Check whether CPU is the master or slave
- */
-static inline int s3c24xx_snd_is_clkmaster(void)
-{
-	pr_debug("Entered %s\n", __func__);
-
-	return (readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & S3C2410_IISMOD_SLAVE) ? 0:1;
-}
-
-/*
- * Set S3C24xx I2S DAI format
- */
-static int s3c24xx_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
-		unsigned int fmt)
-{
-	u32 iismod;
-
-	pr_debug("Entered %s\n", __func__);
-
-	iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
-	pr_debug("hw_params r: IISMOD: %x \n", iismod);
-
-	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
-	case SND_SOC_DAIFMT_CBM_CFM:
-		iismod |= S3C2410_IISMOD_SLAVE;
-		break;
-	case SND_SOC_DAIFMT_CBS_CFS:
-		iismod &= ~S3C2410_IISMOD_SLAVE;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
-	case SND_SOC_DAIFMT_LEFT_J:
-		iismod |= S3C2410_IISMOD_MSB;
-		break;
-	case SND_SOC_DAIFMT_I2S:
-		iismod &= ~S3C2410_IISMOD_MSB;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
-	pr_debug("hw_params w: IISMOD: %x \n", iismod);
-	return 0;
-}
-
-static int s3c24xx_i2s_hw_params(struct snd_pcm_substream *substream,
-				 struct snd_pcm_hw_params *params,
-				 struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct s3c_dma_params *dma_data;
-	u32 iismod;
-
-	pr_debug("Entered %s\n", __func__);
-
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		dma_data = &s3c24xx_i2s_pcm_stereo_out;
-	else
-		dma_data = &s3c24xx_i2s_pcm_stereo_in;
-
-	snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data);
-
-	/* Working copies of register */
-	iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
-	pr_debug("hw_params r: IISMOD: %x\n", iismod);
-
-	switch (params_format(params)) {
-	case SNDRV_PCM_FORMAT_S8:
-		iismod &= ~S3C2410_IISMOD_16BIT;
-		dma_data->dma_size = 1;
-		break;
-	case SNDRV_PCM_FORMAT_S16_LE:
-		iismod |= S3C2410_IISMOD_16BIT;
-		dma_data->dma_size = 2;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
-	pr_debug("hw_params w: IISMOD: %x\n", iismod);
-	return 0;
-}
-
-static int s3c24xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
-			       struct snd_soc_dai *dai)
-{
-	int ret = 0;
-	struct s3c_dma_params *dma_data =
-		snd_soc_dai_get_dma_data(dai, substream);
-
-	pr_debug("Entered %s\n", __func__);
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-	case SNDRV_PCM_TRIGGER_RESUME:
-	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		if (!s3c24xx_snd_is_clkmaster()) {
-			ret = s3c24xx_snd_lrsync();
-			if (ret)
-				goto exit_err;
-		}
-
-		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
-			s3c24xx_snd_rxctrl(1);
-		else
-			s3c24xx_snd_txctrl(1);
-
-		s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
-		break;
-	case SNDRV_PCM_TRIGGER_STOP:
-	case SNDRV_PCM_TRIGGER_SUSPEND:
-	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
-			s3c24xx_snd_rxctrl(0);
-		else
-			s3c24xx_snd_txctrl(0);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-
-exit_err:
-	return ret;
-}
-
-/*
- * Set S3C24xx Clock source
- */
-static int s3c24xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai,
-	int clk_id, unsigned int freq, int dir)
-{
-	u32 iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
-
-	pr_debug("Entered %s\n", __func__);
-
-	iismod &= ~S3C2440_IISMOD_MPLL;
-
-	switch (clk_id) {
-	case S3C24XX_CLKSRC_PCLK:
-		break;
-	case S3C24XX_CLKSRC_MPLL:
-		iismod |= S3C2440_IISMOD_MPLL;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
-	return 0;
-}
-
-/*
- * Set S3C24xx Clock dividers
- */
-static int s3c24xx_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai,
-	int div_id, int div)
-{
-	u32 reg;
-
-	pr_debug("Entered %s\n", __func__);
-
-	switch (div_id) {
-	case S3C24XX_DIV_BCLK:
-		reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~S3C2410_IISMOD_FS_MASK;
-		writel(reg | div, s3c24xx_i2s.regs + S3C2410_IISMOD);
-		break;
-	case S3C24XX_DIV_MCLK:
-		reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~(S3C2410_IISMOD_384FS);
-		writel(reg | div, s3c24xx_i2s.regs + S3C2410_IISMOD);
-		break;
-	case S3C24XX_DIV_PRESCALER:
-		writel(div, s3c24xx_i2s.regs + S3C2410_IISPSR);
-		reg = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
-		writel(reg | S3C2410_IISCON_PSCEN, s3c24xx_i2s.regs + S3C2410_IISCON);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/*
- * To avoid duplicating clock code, allow machine driver to
- * get the clockrate from here.
- */
-u32 s3c24xx_i2s_get_clockrate(void)
-{
-	return clk_get_rate(s3c24xx_i2s.iis_clk);
-}
-EXPORT_SYMBOL_GPL(s3c24xx_i2s_get_clockrate);
-
-static int s3c24xx_i2s_probe(struct snd_soc_dai *dai)
-{
-	pr_debug("Entered %s\n", __func__);
-
-	s3c24xx_i2s.regs = ioremap(S3C2410_PA_IIS, 0x100);
-	if (s3c24xx_i2s.regs == NULL)
-		return -ENXIO;
-
-	s3c24xx_i2s.iis_clk = clk_get(dai->dev, "iis");
-	if (s3c24xx_i2s.iis_clk == NULL) {
-		pr_err("failed to get iis_clock\n");
-		iounmap(s3c24xx_i2s.regs);
-		return -ENODEV;
-	}
-	clk_enable(s3c24xx_i2s.iis_clk);
-
-	/* Configure the I2S pins in correct mode */
-	s3c2410_gpio_cfgpin(S3C2410_GPE0, S3C2410_GPE0_I2SLRCK);
-	s3c2410_gpio_cfgpin(S3C2410_GPE1, S3C2410_GPE1_I2SSCLK);
-	s3c2410_gpio_cfgpin(S3C2410_GPE2, S3C2410_GPE2_CDCLK);
-	s3c2410_gpio_cfgpin(S3C2410_GPE3, S3C2410_GPE3_I2SSDI);
-	s3c2410_gpio_cfgpin(S3C2410_GPE4, S3C2410_GPE4_I2SSDO);
-
-	writel(S3C2410_IISCON_IISEN, s3c24xx_i2s.regs + S3C2410_IISCON);
-
-	s3c24xx_snd_txctrl(0);
-	s3c24xx_snd_rxctrl(0);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int s3c24xx_i2s_suspend(struct snd_soc_dai *cpu_dai)
-{
-	pr_debug("Entered %s\n", __func__);
-
-	s3c24xx_i2s.iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
-	s3c24xx_i2s.iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
-	s3c24xx_i2s.iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON);
-	s3c24xx_i2s.iispsr = readl(s3c24xx_i2s.regs + S3C2410_IISPSR);
-
-	clk_disable(s3c24xx_i2s.iis_clk);
-
-	return 0;
-}
-
-static int s3c24xx_i2s_resume(struct snd_soc_dai *cpu_dai)
-{
-	pr_debug("Entered %s\n", __func__);
-	clk_enable(s3c24xx_i2s.iis_clk);
-
-	writel(s3c24xx_i2s.iiscon, s3c24xx_i2s.regs + S3C2410_IISCON);
-	writel(s3c24xx_i2s.iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
-	writel(s3c24xx_i2s.iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
-	writel(s3c24xx_i2s.iispsr, s3c24xx_i2s.regs + S3C2410_IISPSR);
-
-	return 0;
-}
-#else
-#define s3c24xx_i2s_suspend NULL
-#define s3c24xx_i2s_resume NULL
-#endif
-
-
-#define S3C24XX_I2S_RATES \
-	(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
-	SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
-	SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
-
-static struct snd_soc_dai_ops s3c24xx_i2s_dai_ops = {
-	.trigger	= s3c24xx_i2s_trigger,
-	.hw_params	= s3c24xx_i2s_hw_params,
-	.set_fmt	= s3c24xx_i2s_set_fmt,
-	.set_clkdiv	= s3c24xx_i2s_set_clkdiv,
-	.set_sysclk	= s3c24xx_i2s_set_sysclk,
-};
-
-static struct snd_soc_dai_driver s3c24xx_i2s_dai = {
-	.probe = s3c24xx_i2s_probe,
-	.suspend = s3c24xx_i2s_suspend,
-	.resume = s3c24xx_i2s_resume,
-	.playback = {
-		.channels_min = 2,
-		.channels_max = 2,
-		.rates = S3C24XX_I2S_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,},
-	.capture = {
-		.channels_min = 2,
-		.channels_max = 2,
-		.rates = S3C24XX_I2S_RATES,
-		.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,},
-	.ops = &s3c24xx_i2s_dai_ops,
-};
-
-static __devinit int s3c24xx_iis_dev_probe(struct platform_device *pdev)
-{
-	return snd_soc_register_dai(&pdev->dev, &s3c24xx_i2s_dai);
-}
-
-static __devexit int s3c24xx_iis_dev_remove(struct platform_device *pdev)
-{
-	snd_soc_unregister_dai(&pdev->dev);
-	return 0;
-}
-
-static struct platform_driver s3c24xx_iis_driver = {
-	.probe  = s3c24xx_iis_dev_probe,
-	.remove = s3c24xx_iis_dev_remove,
-	.driver = {
-		.name = "s3c24xx-iis",
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init s3c24xx_i2s_init(void)
-{
-	return platform_driver_register(&s3c24xx_iis_driver);
-}
-module_init(s3c24xx_i2s_init);
-
-static void __exit s3c24xx_i2s_exit(void)
-{
-	platform_driver_unregister(&s3c24xx_iis_driver);
-}
-module_exit(s3c24xx_i2s_exit);
-
-/* Module information */
-MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("s3c24xx I2S SoC Interface");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:s3c24xx-iis");
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.h b/sound/soc/s3c24xx/s3c24xx-i2s.h
deleted file mode 100644
index f9ca04e..0000000
--- a/sound/soc/s3c24xx/s3c24xx-i2s.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * s3c24xx-i2s.c  --  ALSA Soc Audio Layer
- *
- * Copyright 2005 Wolfson Microelectronics PLC.
- * Author: Graeme Gregory
- *         graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  Revision history
- *    10th Nov 2006   Initial version.
- */
-
-#ifndef S3C24XXI2S_H_
-#define S3C24XXI2S_H_
-
-/* clock sources */
-#define S3C24XX_CLKSRC_PCLK 0
-#define S3C24XX_CLKSRC_MPLL 1
-
-/* Clock dividers */
-#define S3C24XX_DIV_MCLK	0
-#define S3C24XX_DIV_BCLK	1
-#define S3C24XX_DIV_PRESCALER	2
-
-/* prescaler */
-#define S3C24XX_PRESCALE(a,b) \
-	(((a - 1) << S3C2410_IISPSR_INTSHIFT) | ((b - 1) << S3C2410_IISPSR_EXTSHFIT))
-
-u32 s3c24xx_i2s_get_clockrate(void);
-
-#endif /*S3C24XXI2S_H_*/
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec.c b/sound/soc/s3c24xx/s3c24xx_simtec.c
deleted file mode 100644
index 3f052a5..0000000
--- a/sound/soc/s3c24xx/s3c24xx_simtec.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/* sound/soc/s3c24xx/s3c24xx_simtec.c
- *
- * Copyright 2009 Simtec Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <sound/soc-dapm.h>
-
-#include <plat/audio-simtec.h>
-
-#include "dma.h"
-#include "s3c24xx-i2s.h"
-#include "s3c24xx_simtec.h"
-
-static struct s3c24xx_audio_simtec_pdata *pdata;
-static struct clk *xtal_clk;
-
-static int spk_gain;
-static int spk_unmute;
-
-/**
- * speaker_gain_get - read the speaker gain setting.
- * @kcontrol: The control for the speaker gain.
- * @ucontrol: The value that needs to be updated.
- *
- * Read the value for the AMP gain control.
- */
-static int speaker_gain_get(struct snd_kcontrol *kcontrol,
-			    struct snd_ctl_elem_value *ucontrol)
-{
-	ucontrol->value.integer.value[0] = spk_gain;
-	return 0;
-}
-
-/**
- * speaker_gain_set - set the value of the speaker amp gain
- * @value: The value to write.
- */
-static void speaker_gain_set(int value)
-{
-	gpio_set_value_cansleep(pdata->amp_gain[0], value & 1);
-	gpio_set_value_cansleep(pdata->amp_gain[1], value >> 1);
-}
-
-/**
- * speaker_gain_put - set the speaker gain setting.
- * @kcontrol: The control for the speaker gain.
- * @ucontrol: The value that needs to be set.
- *
- * Set the value of the speaker gain from the specified
- * @ucontrol setting.
- *
- * Note, if the speaker amp is muted, then we do not set a gain value
- * as at-least one of the ICs that is fitted will try and power up even
- * if the main control is set to off.
- */
-static int speaker_gain_put(struct snd_kcontrol *kcontrol,
-			    struct snd_ctl_elem_value *ucontrol)
-{
-	int value = ucontrol->value.integer.value[0];
-
-	spk_gain = value;
-
-	if (!spk_unmute)
-		speaker_gain_set(value);
-
-	return 0;
-}
-
-static const struct snd_kcontrol_new amp_gain_controls[] = {
-	SOC_SINGLE_EXT("Speaker Gain", 0, 0, 3, 0,
-		       speaker_gain_get, speaker_gain_put),
-};
-
-/**
- * spk_unmute_state - set the unmute state of the speaker
- * @to: zero to unmute, non-zero to ununmute.
- */
-static void spk_unmute_state(int to)
-{
-	pr_debug("%s: to=%d\n", __func__, to);
-
-	spk_unmute = to;
-	gpio_set_value(pdata->amp_gpio, to);
-
-	/* if we're umuting, also re-set the gain */
-	if (to && pdata->amp_gain[0] > 0)
-		speaker_gain_set(spk_gain);
-}
-
-/**
- * speaker_unmute_get - read the speaker unmute setting.
- * @kcontrol: The control for the speaker gain.
- * @ucontrol: The value that needs to be updated.
- *
- * Read the value for the AMP gain control.
- */
-static int speaker_unmute_get(struct snd_kcontrol *kcontrol,
-			    struct snd_ctl_elem_value *ucontrol)
-{
-	ucontrol->value.integer.value[0] = spk_unmute;
-	return 0;
-}
-
-/**
- * speaker_unmute_put - set the speaker unmute setting.
- * @kcontrol: The control for the speaker gain.
- * @ucontrol: The value that needs to be set.
- *
- * Set the value of the speaker gain from the specified
- * @ucontrol setting.
- */
-static int speaker_unmute_put(struct snd_kcontrol *kcontrol,
-			    struct snd_ctl_elem_value *ucontrol)
-{
-	spk_unmute_state(ucontrol->value.integer.value[0]);
-	return 0;
-}
-
-/* This is added as a manual control as the speaker amps create clicks
- * when their power state is changed, which are far more noticeable than
- * anything produced by the CODEC itself.
- */
-static const struct snd_kcontrol_new amp_unmute_controls[] = {
-	SOC_SINGLE_EXT("Speaker Switch", 0, 0, 1, 0,
-		       speaker_unmute_get, speaker_unmute_put),
-};
-
-void simtec_audio_init(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_soc_codec *codec = rtd->codec;
-
-	if (pdata->amp_gpio > 0) {
-		pr_debug("%s: adding amp routes\n", __func__);
-
-		snd_soc_add_controls(codec, amp_unmute_controls,
-				     ARRAY_SIZE(amp_unmute_controls));
-	}
-
-	if (pdata->amp_gain[0] > 0) {
-		pr_debug("%s: adding amp controls\n", __func__);
-		snd_soc_add_controls(codec, amp_gain_controls,
-				     ARRAY_SIZE(amp_gain_controls));
-	}
-}
-EXPORT_SYMBOL_GPL(simtec_audio_init);
-
-#define CODEC_CLOCK 12000000
-
-/**
- * simtec_hw_params - update hardware parameters
- * @substream: The audio substream instance.
- * @params: The parameters requested.
- *
- * Update the codec data routing and configuration  settings
- * from the supplied data.
- */
-static int simtec_hw_params(struct snd_pcm_substream *substream,
-			    struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	int ret;
-
-	/* Set the CODEC as the bus clock master, I2S */
-	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
-				  SND_SOC_DAIFMT_NB_NF |
-				  SND_SOC_DAIFMT_CBM_CFM);
-	if (ret) {
-		pr_err("%s: failed set cpu dai format\n", __func__);
-		return ret;
-	}
-
-	/* Set the CODEC as the bus clock master */
-	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
-				  SND_SOC_DAIFMT_NB_NF |
-				  SND_SOC_DAIFMT_CBM_CFM);
-	if (ret) {
-		pr_err("%s: failed set codec dai format\n", __func__);
-		return ret;
-	}
-
-	ret = snd_soc_dai_set_sysclk(codec_dai, 0,
-				     CODEC_CLOCK, SND_SOC_CLOCK_IN);
-	if (ret) {
-		pr_err( "%s: failed setting codec sysclk\n", __func__);
-		return ret;
-	}
-
-	if (pdata->use_mpllin) {
-		ret = snd_soc_dai_set_sysclk(cpu_dai, S3C24XX_CLKSRC_MPLL,
-					     0, SND_SOC_CLOCK_OUT);
-
-		if (ret) {
-			pr_err("%s: failed to set MPLLin as clksrc\n",
-			       __func__);
-			return ret;
-		}
-	}
-
-	if (pdata->output_cdclk) {
-		int cdclk_scale;
-
-		cdclk_scale = clk_get_rate(xtal_clk) / CODEC_CLOCK;
-		cdclk_scale--;
-
-		ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
-					     cdclk_scale);
-	}
-
-	return 0;
-}
-
-static int simtec_call_startup(struct s3c24xx_audio_simtec_pdata *pd)
-{
-	/* call any board supplied startup code, this currently only
-	 * covers the bast/vr1000 which have a CPLD in the way of the
-	 * LRCLK */
-	if (pd->startup)
-		pd->startup();
-
-	return 0;
-}
-
-static struct snd_soc_ops simtec_snd_ops = {
-	.hw_params	= simtec_hw_params,
-};
-
-/**
- * attach_gpio_amp - get and configure the necessary gpios
- * @dev: The device we're probing.
- * @pd: The platform data supplied by the board.
- *
- * If there is a GPIO based amplifier attached to the board, claim
- * the necessary GPIO lines for it, and set default values.
- */
-static int attach_gpio_amp(struct device *dev,
-			   struct s3c24xx_audio_simtec_pdata *pd)
-{
-	int ret;
-
-	/* attach gpio amp gain (if any) */
-	if (pdata->amp_gain[0] > 0) {
-		ret = gpio_request(pd->amp_gain[0], "gpio-amp-gain0");
-		if (ret) {
-			dev_err(dev, "cannot get amp gpio gain0\n");
-			return ret;
-		}
-
-		ret = gpio_request(pd->amp_gain[1], "gpio-amp-gain1");
-		if (ret) {
-			dev_err(dev, "cannot get amp gpio gain1\n");
-			gpio_free(pdata->amp_gain[0]);
-			return ret;
-		}
-
-		gpio_direction_output(pd->amp_gain[0], 0);
-		gpio_direction_output(pd->amp_gain[1], 0);
-	}
-
-	/* note, currently we assume GPA0 isn't valid amp */
-	if (pdata->amp_gpio > 0) {
-		ret = gpio_request(pd->amp_gpio, "gpio-amp");
-		if (ret) {
-			dev_err(dev, "cannot get amp gpio %d (%d)\n",
-				pd->amp_gpio, ret);
-			goto err_amp;
-		}
-
-		/* set the amp off at startup */
-		spk_unmute_state(0);
-	}
-
-	return 0;
-
-err_amp:
-	if (pd->amp_gain[0] > 0) {
-		gpio_free(pd->amp_gain[0]);
-		gpio_free(pd->amp_gain[1]);
-	}
-
-	return ret;
-}
-
-static void detach_gpio_amp(struct s3c24xx_audio_simtec_pdata *pd)
-{
-	if (pd->amp_gain[0] > 0) {
-		gpio_free(pd->amp_gain[0]);
-		gpio_free(pd->amp_gain[1]);
-	}
-
-	if (pd->amp_gpio > 0)
-		gpio_free(pd->amp_gpio);
-}
-
-#ifdef CONFIG_PM
-int simtec_audio_resume(struct device *dev)
-{
-	simtec_call_startup(pdata);
-	return 0;
-}
-
-const struct dev_pm_ops simtec_audio_pmops = {
-	.resume	= simtec_audio_resume,
-};
-EXPORT_SYMBOL_GPL(simtec_audio_pmops);
-#endif
-
-int __devinit simtec_audio_core_probe(struct platform_device *pdev,
-				      struct snd_soc_card *card)
-{
-	struct platform_device *snd_dev;
-	int ret;
-
-	card->dai_link->ops = &simtec_snd_ops;
-
-	pdata = pdev->dev.platform_data;
-	if (!pdata) {
-		dev_err(&pdev->dev, "no platform data supplied\n");
-		return -EINVAL;
-	}
-
-	simtec_call_startup(pdata);
-
-	xtal_clk = clk_get(&pdev->dev, "xtal");
-	if (IS_ERR(xtal_clk)) {
-		dev_err(&pdev->dev, "could not get clkout0\n");
-		return -EINVAL;
-	}
-
-	dev_info(&pdev->dev, "xtal rate is %ld\n", clk_get_rate(xtal_clk));
-
-	ret = attach_gpio_amp(&pdev->dev, pdata);
-	if (ret)
-		goto err_clk;
-
-	snd_dev = platform_device_alloc("soc-audio", -1);
-	if (!snd_dev) {
-		dev_err(&pdev->dev, "failed to alloc soc-audio devicec\n");
-		ret = -ENOMEM;
-		goto err_gpio;
-	}
-
-	platform_set_drvdata(snd_dev, card);
-
-	ret = platform_device_add(snd_dev);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to add soc-audio dev\n");
-		goto err_pdev;
-	}
-
-	platform_set_drvdata(pdev, snd_dev);
-	return 0;
-
-err_pdev:
-	platform_device_put(snd_dev);
-
-err_gpio:
-	detach_gpio_amp(pdata);
-
-err_clk:
-	clk_put(xtal_clk);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(simtec_audio_core_probe);
-
-int __devexit simtec_audio_remove(struct platform_device *pdev)
-{
-	struct platform_device *snd_dev = platform_get_drvdata(pdev);
-
-	platform_device_unregister(snd_dev);
-
-	detach_gpio_amp(pdata);
-	clk_put(xtal_clk);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(simtec_audio_remove);
-
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("ALSA SoC Simtec Audio common support");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec.h b/sound/soc/s3c24xx/s3c24xx_simtec.h
deleted file mode 100644
index e63d5ff..0000000
--- a/sound/soc/s3c24xx/s3c24xx_simtec.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* sound/soc/s3c24xx/s3c24xx_simtec.h
- *
- * Copyright 2009 Simtec Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void simtec_audio_init(struct snd_soc_pcm_runtime *rtd);
-
-extern int simtec_audio_core_probe(struct platform_device *pdev,
-				   struct snd_soc_card *card);
-
-extern int simtec_audio_remove(struct platform_device *pdev);
-
-#ifdef CONFIG_PM
-extern const struct dev_pm_ops simtec_audio_pmops;
-#define simtec_audio_pm &simtec_audio_pmops
-#else
-#define simtec_audio_pm NULL
-#endif
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c b/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
deleted file mode 100644
index 8b246ab..0000000
--- a/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/* sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
- *
- * Copyright 2009 Simtec Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <sound/soc-dapm.h>
-
-#include <plat/audio-simtec.h>
-
-#include "dma.h"
-#include "s3c24xx-i2s.h"
-#include "s3c24xx_simtec.h"
-
-#include "../codecs/tlv320aic3x.h"
-
-static const struct snd_soc_dapm_widget dapm_widgets[] = {
-	SND_SOC_DAPM_LINE("GSM Out", NULL),
-	SND_SOC_DAPM_LINE("GSM In", NULL),
-	SND_SOC_DAPM_LINE("Line In", NULL),
-	SND_SOC_DAPM_LINE("Line Out", NULL),
-	SND_SOC_DAPM_LINE("ZV", NULL),
-	SND_SOC_DAPM_MIC("Mic Jack", NULL),
-	SND_SOC_DAPM_HP("Headphone Jack", NULL),
-};
-
-static const struct snd_soc_dapm_route base_map[] = {
-	/* Headphone connected to HP{L,R}OUT and HP{L,R}COM */
-
-	{ "Headphone Jack", NULL, "HPLOUT" },
-	{ "Headphone Jack", NULL, "HPLCOM" },
-	{ "Headphone Jack", NULL, "HPROUT" },
-	{ "Headphone Jack", NULL, "HPRCOM" },
-
-	/* ZV connected to Line1 */
-
-	{ "LINE1L", NULL, "ZV" },
-	{ "LINE1R", NULL, "ZV" },
-
-	/* Line In connected to Line2 */
-
-	{ "LINE2L", NULL, "Line In" },
-	{ "LINE2R", NULL, "Line In" },
-
-	/* Microphone connected to MIC3R and MIC_BIAS */
-
-	{ "MIC3L", NULL, "Mic Jack" },
-
-	/* GSM connected to MONO_LOUT and MIC3L (in) */
-
-	{ "GSM Out", NULL, "MONO_LOUT" },
-	{ "MIC3L", NULL, "GSM In" },
-
-	/* Speaker is connected to LINEOUT{LN,LP,RN,RP}, however we are
-	 * not using the DAPM to power it up and down as there it makes
-	 * a click when powering up. */
-};
-
-/**
- * simtec_hermes_init - initialise and add controls
- * @codec; The codec instance to attach to.
- *
- * Attach our controls and configure the necessary codec
- * mappings for our sound card instance.
-*/
-static int simtec_hermes_init(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_soc_codec *codec = rtd->codec;
-
-	snd_soc_dapm_new_controls(codec, dapm_widgets,
-				  ARRAY_SIZE(dapm_widgets));
-
-	snd_soc_dapm_add_routes(codec, base_map, ARRAY_SIZE(base_map));
-
-	snd_soc_dapm_enable_pin(codec, "Headphone Jack");
-	snd_soc_dapm_enable_pin(codec, "Line In");
-	snd_soc_dapm_enable_pin(codec, "Line Out");
-	snd_soc_dapm_enable_pin(codec, "Mic Jack");
-
-	simtec_audio_init(rtd);
-	snd_soc_dapm_sync(codec);
-
-	return 0;
-}
-
-static struct snd_soc_dai_link simtec_dai_aic33 = {
-	.name		= "tlv320aic33",
-	.stream_name	= "TLV320AIC33",
-	.codec_name	= "tlv320aic3x-codec.0-0x1a",
-	.cpu_dai_name	= "s3c24xx-i2s",
-	.codec_dai_name = "tlv320aic3x-hifi",
-	.platform_name	= "samsung-audio",
-	.init		= simtec_hermes_init,
-};
-
-/* simtec audio machine driver */
-static struct snd_soc_card snd_soc_machine_simtec_aic33 = {
-	.name		= "Simtec-Hermes",
-	.dai_link	= &simtec_dai_aic33,
-	.num_links	= 1,
-};
-
-static int __devinit simtec_audio_hermes_probe(struct platform_device *pd)
-{
-	dev_info(&pd->dev, "probing....\n");
-	return simtec_audio_core_probe(pd, &snd_soc_machine_simtec_aic33);
-}
-
-static struct platform_driver simtec_audio_hermes_platdrv = {
-	.driver	= {
-		.owner	= THIS_MODULE,
-		.name	= "s3c24xx-simtec-hermes-snd",
-		.pm	= simtec_audio_pm,
-	},
-	.probe	= simtec_audio_hermes_probe,
-	.remove	= __devexit_p(simtec_audio_remove),
-};
-
-MODULE_ALIAS("platform:s3c24xx-simtec-hermes-snd");
-
-static int __init simtec_hermes_modinit(void)
-{
-	return platform_driver_register(&simtec_audio_hermes_platdrv);
-}
-
-static void __exit simtec_hermes_modexit(void)
-{
-	platform_driver_unregister(&simtec_audio_hermes_platdrv);
-}
-
-module_init(simtec_hermes_modinit);
-module_exit(simtec_hermes_modexit);
-
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("ALSA SoC Simtec Audio support");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c b/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
deleted file mode 100644
index a922e1e..0000000
--- a/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/* sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
- *
- * Copyright 2009 Simtec Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <sound/soc-dapm.h>
-
-#include <plat/audio-simtec.h>
-
-#include "dma.h"
-#include "s3c24xx-i2s.h"
-#include "s3c24xx_simtec.h"
-
-#include "../codecs/tlv320aic23.h"
-
-/* supported machines:
- *
- * Machine	Connections		AMP
- * -------	-----------		---
- * BAST		MIC, HPOUT, LOUT, LIN	TPA2001D1 (HPOUTL,R) (gain hardwired)
- * VR1000	HPOUT, LIN		None
- * VR2000	LIN, LOUT, MIC, HP	LM4871 (HPOUTL,R)
- * DePicture	LIN, LOUT, MIC, HP	LM4871 (HPOUTL,R)
- * Anubis	LIN, LOUT, MIC, HP	TPA2001D1 (HPOUTL,R)
- */
-
-static const struct snd_soc_dapm_widget dapm_widgets[] = {
-	SND_SOC_DAPM_HP("Headphone Jack", NULL),
-	SND_SOC_DAPM_LINE("Line In", NULL),
-	SND_SOC_DAPM_LINE("Line Out", NULL),
-	SND_SOC_DAPM_MIC("Mic Jack", NULL),
-};
-
-static const struct snd_soc_dapm_route base_map[] = {
-	{ "Headphone Jack", NULL, "LHPOUT"},
-	{ "Headphone Jack", NULL, "RHPOUT"},
-
-	{ "Line Out", NULL, "LOUT" },
-	{ "Line Out", NULL, "ROUT" },
-
-	{ "LLINEIN", NULL, "Line In"},
-	{ "RLINEIN", NULL, "Line In"},
-
-	{ "MICIN", NULL, "Mic Jack"},
-};
-
-/**
- * simtec_tlv320aic23_init - initialise and add controls
- * @codec; The codec instance to attach to.
- *
- * Attach our controls and configure the necessary codec
- * mappings for our sound card instance.
-*/
-static int simtec_tlv320aic23_init(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_soc_codec *codec = rtd->codec;
-
-	snd_soc_dapm_new_controls(codec, dapm_widgets,
-				  ARRAY_SIZE(dapm_widgets));
-
-	snd_soc_dapm_add_routes(codec, base_map, ARRAY_SIZE(base_map));
-
-	snd_soc_dapm_enable_pin(codec, "Headphone Jack");
-	snd_soc_dapm_enable_pin(codec, "Line In");
-	snd_soc_dapm_enable_pin(codec, "Line Out");
-	snd_soc_dapm_enable_pin(codec, "Mic Jack");
-
-	simtec_audio_init(rtd);
-	snd_soc_dapm_sync(codec);
-
-	return 0;
-}
-
-static struct snd_soc_dai_link simtec_dai_aic23 = {
-	.name		= "tlv320aic23",
-	.stream_name	= "TLV320AIC23",
-	.codec_name	= "tlv320aic3x-codec.0-0x1a",
-	.cpu_dai_name	= "s3c24xx-i2s",
-	.codec_dai_name = "tlv320aic3x-hifi",
-	.platform_name	= "samsung-audio",
-	.init		= simtec_tlv320aic23_init,
-};
-
-/* simtec audio machine driver */
-static struct snd_soc_card snd_soc_machine_simtec_aic23 = {
-	.name		= "Simtec",
-	.dai_link	= &simtec_dai_aic23,
-	.num_links	= 1,
-};
-
-static int __devinit simtec_audio_tlv320aic23_probe(struct platform_device *pd)
-{
-	return simtec_audio_core_probe(pd, &snd_soc_machine_simtec_aic23);
-}
-
-static struct platform_driver simtec_audio_tlv320aic23_platdrv = {
-	.driver	= {
-		.owner	= THIS_MODULE,
-		.name	= "s3c24xx-simtec-tlv320aic23",
-		.pm	= simtec_audio_pm,
-	},
-	.probe	= simtec_audio_tlv320aic23_probe,
-	.remove	= __devexit_p(simtec_audio_remove),
-};
-
-MODULE_ALIAS("platform:s3c24xx-simtec-tlv320aic23");
-
-static int __init simtec_tlv320aic23_modinit(void)
-{
-	return platform_driver_register(&simtec_audio_tlv320aic23_platdrv);
-}
-
-static void __exit simtec_tlv320aic23_modexit(void)
-{
-	platform_driver_unregister(&simtec_audio_tlv320aic23_platdrv);
-}
-
-module_init(simtec_tlv320aic23_modinit);
-module_exit(simtec_tlv320aic23_modexit);
-
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("ALSA SoC Simtec Audio support");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/s3c24xx_uda134x.c b/sound/soc/s3c24xx/s3c24xx_uda134x.c
deleted file mode 100644
index 87eeb46..0000000
--- a/sound/soc/s3c24xx/s3c24xx_uda134x.c
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- * Modifications by Christian Pellegrin <chripell@evolware.org>
- *
- * s3c24xx_uda134x.c  --  S3C24XX_UDA134X ALSA SoC Audio board driver
- *
- * Copyright 2007 Dension Audio Systems Ltd.
- * Author: Zoltan Devai
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/gpio.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-#include <sound/soc-dapm.h>
-#include <sound/s3c24xx_uda134x.h>
-#include <sound/uda134x.h>
-
-#include <plat/regs-iis.h>
-
-#include "dma.h"
-#include "s3c24xx-i2s.h"
-#include "../codecs/uda134x.h"
-
-
-/* #define ENFORCE_RATES 1 */
-/*
-  Unfortunately the S3C24XX in master mode has a limited capacity of
-  generating the clock for the codec. If you define this only rates
-  that are really available will be enforced. But be careful, most
-  user level application just want the usual sampling frequencies (8,
-  11.025, 22.050, 44.1 kHz) and anyway resampling is a costly
-  operation for embedded systems. So if you aren't very lucky or your
-  hardware engineer wasn't very forward-looking it's better to leave
-  this undefined. If you do so an approximate value for the requested
-  sampling rate in the range -/+ 5% will be chosen. If this in not
-  possible an error will be returned.
-*/
-
-static struct clk *xtal;
-static struct clk *pclk;
-/* this is need because we don't have a place where to keep the
- * pointers to the clocks in each substream. We get the clocks only
- * when we are actually using them so we don't block stuff like
- * frequency change or oscillator power-off */
-static int clk_users;
-static DEFINE_MUTEX(clk_lock);
-
-static unsigned int rates[33 * 2];
-#ifdef ENFORCE_RATES
-static struct snd_pcm_hw_constraint_list hw_constraints_rates = {
-	.count	= ARRAY_SIZE(rates),
-	.list	= rates,
-	.mask	= 0,
-};
-#endif
-
-static struct platform_device *s3c24xx_uda134x_snd_device;
-
-static int s3c24xx_uda134x_startup(struct snd_pcm_substream *substream)
-{
-	int ret = 0;
-#ifdef ENFORCE_RATES
-	struct snd_pcm_runtime *runtime = substream->runtime;
-#endif
-
-	mutex_lock(&clk_lock);
-	pr_debug("%s %d\n", __func__, clk_users);
-	if (clk_users == 0) {
-		xtal = clk_get(&s3c24xx_uda134x_snd_device->dev, "xtal");
-		if (!xtal) {
-			printk(KERN_ERR "%s cannot get xtal\n", __func__);
-			ret = -EBUSY;
-		} else {
-			pclk = clk_get(&s3c24xx_uda134x_snd_device->dev,
-				       "pclk");
-			if (!pclk) {
-				printk(KERN_ERR "%s cannot get pclk\n",
-				       __func__);
-				clk_put(xtal);
-				ret = -EBUSY;
-			}
-		}
-		if (!ret) {
-			int i, j;
-
-			for (i = 0; i < 2; i++) {
-				int fs = i ? 256 : 384;
-
-				rates[i*33] = clk_get_rate(xtal) / fs;
-				for (j = 1; j < 33; j++)
-					rates[i*33 + j] = clk_get_rate(pclk) /
-						(j * fs);
-			}
-		}
-	}
-	clk_users += 1;
-	mutex_unlock(&clk_lock);
-	if (!ret) {
-#ifdef ENFORCE_RATES
-		ret = snd_pcm_hw_constraint_list(runtime, 0,
-						 SNDRV_PCM_HW_PARAM_RATE,
-						 &hw_constraints_rates);
-		if (ret < 0)
-			printk(KERN_ERR "%s cannot set constraints\n",
-			       __func__);
-#endif
-	}
-	return ret;
-}
-
-static void s3c24xx_uda134x_shutdown(struct snd_pcm_substream *substream)
-{
-	mutex_lock(&clk_lock);
-	pr_debug("%s %d\n", __func__, clk_users);
-	clk_users -= 1;
-	if (clk_users == 0) {
-		clk_put(xtal);
-		xtal = NULL;
-		clk_put(pclk);
-		pclk = NULL;
-	}
-	mutex_unlock(&clk_lock);
-}
-
-static int s3c24xx_uda134x_hw_params(struct snd_pcm_substream *substream,
-					struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	unsigned int clk = 0;
-	int ret = 0;
-	int clk_source, fs_mode;
-	unsigned long rate = params_rate(params);
-	long err, cerr;
-	unsigned int div;
-	int i, bi;
-
-	err = 999999;
-	bi = 0;
-	for (i = 0; i < 2*33; i++) {
-		cerr = rates[i] - rate;
-		if (cerr < 0)
-			cerr = -cerr;
-		if (cerr < err) {
-			err = cerr;
-			bi = i;
-		}
-	}
-	if (bi / 33 == 1)
-		fs_mode = S3C2410_IISMOD_256FS;
-	else
-		fs_mode = S3C2410_IISMOD_384FS;
-	if (bi % 33 == 0) {
-		clk_source = S3C24XX_CLKSRC_MPLL;
-		div = 1;
-	} else {
-		clk_source = S3C24XX_CLKSRC_PCLK;
-		div = bi % 33;
-	}
-	pr_debug("%s desired rate %lu, %d\n", __func__, rate, bi);
-
-	clk = (fs_mode == S3C2410_IISMOD_384FS ? 384 : 256) * rate;
-	pr_debug("%s will use: %s %s %d sysclk %d err %ld\n", __func__,
-		 fs_mode == S3C2410_IISMOD_384FS ? "384FS" : "256FS",
-		 clk_source == S3C24XX_CLKSRC_MPLL ? "MPLLin" : "PCLK",
-		 div, clk, err);
-
-	if ((err * 100 / rate) > 5) {
-		printk(KERN_ERR "S3C24XX_UDA134X: effective frequency "
-		       "too different from desired (%ld%%)\n",
-		       err * 100 / rate);
-		return -EINVAL;
-	}
-
-	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
-			SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
-	if (ret < 0)
-		return ret;
-
-	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
-			SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
-	if (ret < 0)
-		return ret;
-
-	ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source , clk,
-			SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, fs_mode);
-	if (ret < 0)
-		return ret;
-
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK,
-			S3C2410_IISMOD_32FS);
-	if (ret < 0)
-		return ret;
-
-	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
-			S3C24XX_PRESCALE(div, div));
-	if (ret < 0)
-		return ret;
-
-	/* set the codec system clock for DAC and ADC */
-	ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk,
-			SND_SOC_CLOCK_OUT);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-static struct snd_soc_ops s3c24xx_uda134x_ops = {
-	.startup = s3c24xx_uda134x_startup,
-	.shutdown = s3c24xx_uda134x_shutdown,
-	.hw_params = s3c24xx_uda134x_hw_params,
-};
-
-static struct snd_soc_dai_link s3c24xx_uda134x_dai_link = {
-	.name = "UDA134X",
-	.stream_name = "UDA134X",
-	.codec_name = "uda134x-hifi",
-	.codec_dai_name = "uda134x-hifi",
-	.cpu_dai_name = "s3c24xx-i2s",
-	.ops = &s3c24xx_uda134x_ops,
-	.platform_name	= "samsung-audio",
-};
-
-static struct snd_soc_card snd_soc_s3c24xx_uda134x = {
-	.name = "S3C24XX_UDA134X",
-	.dai_link = &s3c24xx_uda134x_dai_link,
-	.num_links = 1,
-};
-
-static struct s3c24xx_uda134x_platform_data *s3c24xx_uda134x_l3_pins;
-
-static void setdat(int v)
-{
-	gpio_set_value(s3c24xx_uda134x_l3_pins->l3_data, v > 0);
-}
-
-static void setclk(int v)
-{
-	gpio_set_value(s3c24xx_uda134x_l3_pins->l3_clk, v > 0);
-}
-
-static void setmode(int v)
-{
-	gpio_set_value(s3c24xx_uda134x_l3_pins->l3_mode, v > 0);
-}
-
-/* FIXME - This must be codec platform data but in which board file ?? */
-static struct uda134x_platform_data s3c24xx_uda134x = {
-	.l3 = {
-		.setdat = setdat,
-		.setclk = setclk,
-		.setmode = setmode,
-		.data_hold = 1,
-		.data_setup = 1,
-		.clock_high = 1,
-		.mode_hold = 1,
-		.mode = 1,
-		.mode_setup = 1,
-	},
-};
-
-static int s3c24xx_uda134x_setup_pin(int pin, char *fun)
-{
-	if (gpio_request(pin, "s3c24xx_uda134x") < 0) {
-		printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
-		       "l3 %s pin already in use", fun);
-		return -EBUSY;
-	}
-	gpio_direction_output(pin, 0);
-	return 0;
-}
-
-static int s3c24xx_uda134x_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	printk(KERN_INFO "S3C24XX_UDA134X SoC Audio driver\n");
-
-	s3c24xx_uda134x_l3_pins = pdev->dev.platform_data;
-	if (s3c24xx_uda134x_l3_pins == NULL) {
-		printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
-		       "unable to find platform data\n");
-		return -ENODEV;
-	}
-	s3c24xx_uda134x.power = s3c24xx_uda134x_l3_pins->power;
-	s3c24xx_uda134x.model = s3c24xx_uda134x_l3_pins->model;
-
-	if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_data,
-				      "data") < 0)
-		return -EBUSY;
-	if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_clk,
-				      "clk") < 0) {
-		gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
-		return -EBUSY;
-	}
-	if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_mode,
-				      "mode") < 0) {
-		gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
-		gpio_free(s3c24xx_uda134x_l3_pins->l3_clk);
-		return -EBUSY;
-	}
-
-	s3c24xx_uda134x_snd_device = platform_device_alloc("soc-audio", -1);
-	if (!s3c24xx_uda134x_snd_device) {
-		printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
-		       "Unable to register\n");
-		return -ENOMEM;
-	}
-
-	platform_set_drvdata(s3c24xx_uda134x_snd_device,
-			     &snd_soc_s3c24xx_uda134x);
-	ret = platform_device_add(s3c24xx_uda134x_snd_device);
-	if (ret) {
-		printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: Unable to add\n");
-		platform_device_put(s3c24xx_uda134x_snd_device);
-	}
-
-	return ret;
-}
-
-static int s3c24xx_uda134x_remove(struct platform_device *pdev)
-{
-	platform_device_unregister(s3c24xx_uda134x_snd_device);
-	gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
-	gpio_free(s3c24xx_uda134x_l3_pins->l3_clk);
-	gpio_free(s3c24xx_uda134x_l3_pins->l3_mode);
-	return 0;
-}
-
-static struct platform_driver s3c24xx_uda134x_driver = {
-	.probe  = s3c24xx_uda134x_probe,
-	.remove = s3c24xx_uda134x_remove,
-	.driver = {
-		.name = "s3c24xx_uda134x",
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init s3c24xx_uda134x_init(void)
-{
-	return platform_driver_register(&s3c24xx_uda134x_driver);
-}
-
-static void __exit s3c24xx_uda134x_exit(void)
-{
-	platform_driver_unregister(&s3c24xx_uda134x_driver);
-}
-
-
-module_init(s3c24xx_uda134x_init);
-module_exit(s3c24xx_uda134x_exit);
-
-MODULE_AUTHOR("Zoltan Devai, Christian Pellegrin <chripell@evolware.org>");
-MODULE_DESCRIPTION("S3C24XX_UDA134X ALSA SoC audio driver");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/smartq_wm8987.c b/sound/soc/s3c24xx/smartq_wm8987.c
deleted file mode 100644
index 5fcc420..0000000
--- a/sound/soc/s3c24xx/smartq_wm8987.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/* sound/soc/s3c24xx/smartq_wm8987.c
- *
- * Copyright 2010 Maurus Cuelenaere <mcuelenaere@gmail.com>
- *
- * Based on smdk6410_wm8987.c
- *     Copyright 2007 Wolfson Microelectronics PLC. - linux@wolfsonmicro.com
- *     Graeme Gregory - graeme.gregory@wolfsonmicro.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc-dapm.h>
-#include <sound/jack.h>
-
-#include <asm/mach-types.h>
-
-#include "dma.h"
-#include "i2s.h"
-
-#include "../codecs/wm8750.h"
-
-/*
- * WM8987 is register compatible with WM8750, so using that as base driver.
- */
-
-static struct snd_soc_card snd_soc_smartq;
-
-static int smartq_hifi_hw_params(struct snd_pcm_substream *substream,
-	struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
-	unsigned int clk = 0;
-	int ret;
-
-	switch (params_rate(params)) {
-	case 8000:
-	case 16000:
-	case 32000:
-	case 48000:
-	case 96000:
-		clk = 12288000;
-		break;
-	case 11025:
-	case 22050:
-	case 44100:
-	case 88200:
-		clk = 11289600;
-		break;
-	}
-
-	/* set codec DAI configuration */
-	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
-					     SND_SOC_DAIFMT_NB_NF |
-					     SND_SOC_DAIFMT_CBS_CFS);
-	if (ret < 0)
-		return ret;
-
-	/* set cpu DAI configuration */
-	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
-					   SND_SOC_DAIFMT_NB_NF |
-					   SND_SOC_DAIFMT_CBS_CFS);
-	if (ret < 0)
-		return ret;
-
-	/* Use PCLK for I2S signal generation */
-	ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_RCLKSRC_0,
-					0, SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	/* Gate the RCLK output on PAD */
-	ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_CDCLK,
-					0, SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	/* set the codec system clock for DAC and ADC */
-	ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
-				     SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-/*
- * SmartQ WM8987 HiFi DAI operations.
- */
-static struct snd_soc_ops smartq_hifi_ops = {
-	.hw_params = smartq_hifi_hw_params,
-};
-
-static struct snd_soc_jack smartq_jack;
-
-static struct snd_soc_jack_pin smartq_jack_pins[] = {
-	/* Disable speaker when headphone is plugged in */
-	{
-		.pin	= "Internal Speaker",
-		.mask	= SND_JACK_HEADPHONE,
-	},
-};
-
-static struct snd_soc_jack_gpio smartq_jack_gpios[] = {
-	{
-		.gpio		= S3C64XX_GPL(12),
-		.name		= "headphone detect",
-		.report		= SND_JACK_HEADPHONE,
-		.debounce_time	= 200,
-	},
-};
-
-static const struct snd_kcontrol_new wm8987_smartq_controls[] = {
-	SOC_DAPM_PIN_SWITCH("Internal Speaker"),
-	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
-	SOC_DAPM_PIN_SWITCH("Internal Mic"),
-};
-
-static int smartq_speaker_event(struct snd_soc_dapm_widget *w,
-				struct snd_kcontrol *k,
-				int event)
-{
-	gpio_set_value(S3C64XX_GPK(12), SND_SOC_DAPM_EVENT_OFF(event));
-
-	return 0;
-}
-
-static const struct snd_soc_dapm_widget wm8987_dapm_widgets[] = {
-	SND_SOC_DAPM_SPK("Internal Speaker", smartq_speaker_event),
-	SND_SOC_DAPM_HP("Headphone Jack", NULL),
-	SND_SOC_DAPM_MIC("Internal Mic", NULL),
-};
-
-static const struct snd_soc_dapm_route audio_map[] = {
-	{"Headphone Jack", NULL, "LOUT2"},
-	{"Headphone Jack", NULL, "ROUT2"},
-
-	{"Internal Speaker", NULL, "LOUT2"},
-	{"Internal Speaker", NULL, "ROUT2"},
-
-	{"Mic Bias", NULL, "Internal Mic"},
-	{"LINPUT2", NULL, "Mic Bias"},
-};
-
-static int smartq_wm8987_init(struct snd_soc_codec *codec)
-{
-	int err = 0;
-
-	/* Add SmartQ specific widgets */
-	snd_soc_dapm_new_controls(codec, wm8987_dapm_widgets,
-				  ARRAY_SIZE(wm8987_dapm_widgets));
-
-	/* add SmartQ specific controls */
-	err = snd_soc_add_controls(codec, wm8987_smartq_controls,
-				   ARRAY_SIZE(wm8987_smartq_controls));
-
-	if (err < 0)
-		return err;
-
-	/* setup SmartQ specific audio path */
-	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
-
-	/* set endpoints to not connected */
-	snd_soc_dapm_nc_pin(codec, "LINPUT1");
-	snd_soc_dapm_nc_pin(codec, "RINPUT1");
-	snd_soc_dapm_nc_pin(codec, "OUT3");
-	snd_soc_dapm_nc_pin(codec, "ROUT1");
-
-	/* set endpoints to default off mode */
-	snd_soc_dapm_enable_pin(codec, "Internal Speaker");
-	snd_soc_dapm_enable_pin(codec, "Internal Mic");
-	snd_soc_dapm_disable_pin(codec, "Headphone Jack");
-
-	err = snd_soc_dapm_sync(codec);
-	if (err)
-		return err;
-
-	/* Headphone jack detection */
-	err = snd_soc_jack_new(&snd_soc_smartq, "Headphone Jack",
-			       SND_JACK_HEADPHONE, &smartq_jack);
-	if (err)
-		return err;
-
-	err = snd_soc_jack_add_pins(&smartq_jack, ARRAY_SIZE(smartq_jack_pins),
-				    smartq_jack_pins);
-	if (err)
-		return err;
-
-	err = snd_soc_jack_add_gpios(&smartq_jack,
-				     ARRAY_SIZE(smartq_jack_gpios),
-				     smartq_jack_gpios);
-
-	return err;
-}
-
-static struct snd_soc_dai_link smartq_dai[] = {
-	{
-		.name		= "wm8987",
-		.stream_name	= "SmartQ Hi-Fi",
-		.cpu_dai_name	= "samsung-i2s.0",
-		.codec_dai_name	= "wm8750-hifi",
-		.platform_name	= "samsung-audio",
-		.codec_name	= "wm8750-codec.0-0x1a",
-		.init		= smartq_wm8987_init,
-		.ops		= &smartq_hifi_ops,
-	},
-};
-
-static struct snd_soc_card snd_soc_smartq = {
-	.name = "SmartQ",
-	.dai_link = smartq_dai,
-	.num_links = ARRAY_SIZE(smartq_dai),
-};
-
-static struct platform_device *smartq_snd_device;
-
-static int __init smartq_init(void)
-{
-	int ret;
-
-	if (!machine_is_smartq7() && !machine_is_smartq5()) {
-		pr_info("Only SmartQ is supported by this ASoC driver\n");
-		return -ENODEV;
-	}
-
-	smartq_snd_device = platform_device_alloc("soc-audio", -1);
-	if (!smartq_snd_device)
-		return -ENOMEM;
-
-	platform_set_drvdata(smartq_snd_device, &snd_soc_smartq);
-
-	ret = platform_device_add(smartq_snd_device);
-	if (ret) {
-		platform_device_put(smartq_snd_device);
-		return ret;
-	}
-
-	/* Initialise GPIOs used by amplifiers */
-	ret = gpio_request(S3C64XX_GPK(12), "amplifiers shutdown");
-	if (ret) {
-		dev_err(&smartq_snd_device->dev, "Failed to register GPK12\n");
-		goto err_unregister_device;
-	}
-
-	/* Disable amplifiers */
-	ret = gpio_direction_output(S3C64XX_GPK(12), 1);
-	if (ret) {
-		dev_err(&smartq_snd_device->dev, "Failed to configure GPK12\n");
-		goto err_free_gpio_amp_shut;
-	}
-
-	return 0;
-
-err_free_gpio_amp_shut:
-	gpio_free(S3C64XX_GPK(12));
-err_unregister_device:
-	platform_device_unregister(smartq_snd_device);
-
-	return ret;
-}
-
-static void __exit smartq_exit(void)
-{
-	snd_soc_jack_free_gpios(&smartq_jack, ARRAY_SIZE(smartq_jack_gpios),
-				smartq_jack_gpios);
-
-	platform_device_unregister(smartq_snd_device);
-}
-
-module_init(smartq_init);
-module_exit(smartq_exit);
-
-/* Module information */
-MODULE_AUTHOR("Maurus Cuelenaere <mcuelenaere@gmail.com>");
-MODULE_DESCRIPTION("ALSA SoC SmartQ WM8987");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/smdk2443_wm9710.c b/sound/soc/s3c24xx/smdk2443_wm9710.c
deleted file mode 100644
index 5051699..0000000
--- a/sound/soc/s3c24xx/smdk2443_wm9710.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * smdk2443_wm9710.c  --  SoC audio for smdk2443
- *
- * Copyright 2007 Wolfson Microelectronics PLC.
- * Author: Graeme Gregory
- *         graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <sound/soc-dapm.h>
-
-#include "dma.h"
-#include "ac97.h"
-
-static struct snd_soc_card smdk2443;
-
-static struct snd_soc_dai_link smdk2443_dai[] = {
-{
-	.name = "AC97",
-	.stream_name = "AC97 HiFi",
-	.cpu_dai_name = "samsung-ac97",
-	.codec_dai_name = "ac97-hifi",
-	.codec_name = "ac97-codec",
-	.platform_name = "samsung-audio",
-},
-};
-
-static struct snd_soc_card smdk2443 = {
-	.name = "SMDK2443",
-	.dai_link = smdk2443_dai,
-	.num_links = ARRAY_SIZE(smdk2443_dai),
-};
-
-static struct platform_device *smdk2443_snd_ac97_device;
-
-static int __init smdk2443_init(void)
-{
-	int ret;
-
-	smdk2443_snd_ac97_device = platform_device_alloc("soc-audio", -1);
-	if (!smdk2443_snd_ac97_device)
-		return -ENOMEM;
-
-	platform_set_drvdata(smdk2443_snd_ac97_device, &smdk2443);
-	ret = platform_device_add(smdk2443_snd_ac97_device);
-
-	if (ret)
-		platform_device_put(smdk2443_snd_ac97_device);
-
-	return ret;
-}
-
-static void __exit smdk2443_exit(void)
-{
-	platform_device_unregister(smdk2443_snd_ac97_device);
-}
-
-module_init(smdk2443_init);
-module_exit(smdk2443_exit);
-
-/* Module information */
-MODULE_AUTHOR("Graeme Gregory, graeme.gregory@wolfsonmicro.com, www.wolfsonmicro.com");
-MODULE_DESCRIPTION("ALSA SoC WM9710 SMDK2443");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/smdk_spdif.c b/sound/soc/s3c24xx/smdk_spdif.c
deleted file mode 100644
index 4fc6a9f..0000000
--- a/sound/soc/s3c24xx/smdk_spdif.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * smdk_spdif.c  --  S/PDIF audio for SMDK
- *
- * Copyright 2010 Samsung Electronics Co. Ltd.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-
-#include <plat/devs.h>
-
-#include <sound/soc.h>
-
-#include "dma.h"
-#include "spdif.h"
-
-/* Audio clock settings are belonged to board specific part. Every
- * board can set audio source clock setting which is matched with H/W
- * like this function-'set_audio_clock_heirachy'.
- */
-static int set_audio_clock_heirachy(struct platform_device *pdev)
-{
-	struct clk *fout_epll, *mout_epll, *sclk_audio0, *sclk_spdif;
-	int ret;
-
-	fout_epll = clk_get(NULL, "fout_epll");
-	if (IS_ERR(fout_epll)) {
-		printk(KERN_WARNING "%s: Cannot find fout_epll.\n",
-				__func__);
-		return -EINVAL;
-	}
-
-	mout_epll = clk_get(NULL, "mout_epll");
-	if (IS_ERR(fout_epll)) {
-		printk(KERN_WARNING "%s: Cannot find mout_epll.\n",
-				__func__);
-		ret = -EINVAL;
-		goto out1;
-	}
-
-	sclk_audio0 = clk_get(&pdev->dev, "sclk_audio");
-	if (IS_ERR(sclk_audio0)) {
-		printk(KERN_WARNING "%s: Cannot find sclk_audio.\n",
-				__func__);
-		ret = -EINVAL;
-		goto out2;
-	}
-
-	sclk_spdif = clk_get(NULL, "sclk_spdif");
-	if (IS_ERR(fout_epll)) {
-		printk(KERN_WARNING "%s: Cannot find sclk_spdif.\n",
-				__func__);
-		ret = -EINVAL;
-		goto out3;
-	}
-
-	/* Set audio clock heirachy for S/PDIF */
-	clk_set_parent(mout_epll, fout_epll);
-	clk_set_parent(sclk_audio0, mout_epll);
-	clk_set_parent(sclk_spdif, sclk_audio0);
-
-	clk_put(sclk_spdif);
-out3:
-	clk_put(sclk_audio0);
-out2:
-	clk_put(mout_epll);
-out1:
-	clk_put(fout_epll);
-
-	return ret;
-}
-
-/* We should haved to set clock directly on this part because of clock
- * scheme of Samsudng SoCs did not support to set rates from abstrct
- * clock of it's heirachy.
- */
-static int set_audio_clock_rate(unsigned long epll_rate,
-				unsigned long audio_rate)
-{
-	struct clk *fout_epll, *sclk_spdif;
-
-	fout_epll = clk_get(NULL, "fout_epll");
-	if (IS_ERR(fout_epll)) {
-		printk(KERN_ERR "%s: failed to get fout_epll\n", __func__);
-		return -ENOENT;
-	}
-
-	clk_set_rate(fout_epll, epll_rate);
-	clk_put(fout_epll);
-
-	sclk_spdif = clk_get(NULL, "sclk_spdif");
-	if (IS_ERR(sclk_spdif)) {
-		printk(KERN_ERR "%s: failed to get sclk_spdif\n", __func__);
-		return -ENOENT;
-	}
-
-	clk_set_rate(sclk_spdif, audio_rate);
-	clk_put(sclk_spdif);
-
-	return 0;
-}
-
-static int smdk_hw_params(struct snd_pcm_substream *substream,
-		struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	unsigned long pll_out, rclk_rate;
-	int ret, ratio;
-
-	switch (params_rate(params)) {
-	case 44100:
-		pll_out = 45158400;
-		break;
-	case 32000:
-	case 48000:
-	case 96000:
-		pll_out = 49152000;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/* Setting ratio to 512fs helps to use S/PDIF with HDMI without
-	 * modify S/PDIF ASoC machine driver.
-	 */
-	ratio = 512;
-	rclk_rate = params_rate(params) * ratio;
-
-	/* Set audio source clock rates */
-	ret = set_audio_clock_rate(pll_out, rclk_rate);
-	if (ret < 0)
-		return ret;
-
-	/* Set S/PDIF uses internal source clock */
-	ret = snd_soc_dai_set_sysclk(cpu_dai, SND_SOC_SPDIF_INT_MCLK,
-					rclk_rate, SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	return ret;
-}
-
-static struct snd_soc_ops smdk_spdif_ops = {
-	.hw_params = smdk_hw_params,
-};
-
-static struct snd_soc_card smdk;
-
-static struct snd_soc_dai_link smdk_dai = {
-	.name = "S/PDIF",
-	.stream_name = "S/PDIF PCM Playback",
-	.platform_name = "samsung-audio",
-	.cpu_dai_name = "samsung-spdif",
-	.codec_dai_name = "dit-hifi",
-	.codec_name = "spdif-dit",
-	.ops = &smdk_spdif_ops,
-};
-
-static struct snd_soc_card smdk = {
-	.name = "SMDK-S/PDIF",
-	.dai_link = &smdk_dai,
-	.num_links = 1,
-};
-
-static struct platform_device *smdk_snd_spdif_dit_device;
-static struct platform_device *smdk_snd_spdif_device;
-
-static int __init smdk_init(void)
-{
-	int ret;
-
-	smdk_snd_spdif_dit_device = platform_device_alloc("spdif-dit", -1);
-	if (!smdk_snd_spdif_dit_device)
-		return -ENOMEM;
-
-	ret = platform_device_add(smdk_snd_spdif_dit_device);
-	if (ret)
-		goto err2;
-
-	smdk_snd_spdif_device = platform_device_alloc("soc-audio", -1);
-	if (!smdk_snd_spdif_device) {
-		ret = -ENOMEM;
-		goto err2;
-	}
-
-	platform_set_drvdata(smdk_snd_spdif_device, &smdk);
-
-	ret = platform_device_add(smdk_snd_spdif_device);
-	if (ret)
-		goto err1;
-
-	/* Set audio clock heirachy manually */
-	ret = set_audio_clock_heirachy(smdk_snd_spdif_device);
-	if (ret)
-		goto err1;
-
-	return 0;
-err1:
-	platform_device_put(smdk_snd_spdif_device);
-err2:
-	platform_device_put(smdk_snd_spdif_dit_device);
-	return ret;
-}
-
-static void __exit smdk_exit(void)
-{
-	platform_device_unregister(smdk_snd_spdif_device);
-}
-
-module_init(smdk_init);
-module_exit(smdk_exit);
-
-MODULE_AUTHOR("Seungwhan Youn, <sw.youn@samsung.com>");
-MODULE_DESCRIPTION("ALSA SoC SMDK+S/PDIF");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/smdk_wm8580.c b/sound/soc/s3c24xx/smdk_wm8580.c
deleted file mode 100644
index 46ab884..0000000
--- a/sound/soc/s3c24xx/smdk_wm8580.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- *  smdk_wm8580.c
- *
- *  Copyright (c) 2009 Samsung Electronics Co. Ltd
- *  Author: Jaswinder Singh <jassi.brar@samsung.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-#include <sound/soc-dapm.h>
-
-#include <asm/mach-types.h>
-
-#include "../codecs/wm8580.h"
-#include "dma.h"
-#include "i2s.h"
-
-/*
- * Default CFG switch settings to use this driver:
- *
- *   SMDK6410: Set CFG1 1-3 Off, CFG2 1-4 On
- */
-
-/* SMDK has a 12MHZ crystal attached to WM8580 */
-#define SMDK_WM8580_FREQ 12000000
-
-static int smdk_hw_params(struct snd_pcm_substream *substream,
-	struct snd_pcm_hw_params *params)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-	struct snd_soc_dai *codec_dai = rtd->codec_dai;
-	unsigned int pll_out;
-	int bfs, rfs, ret;
-
-	switch (params_format(params)) {
-	case SNDRV_PCM_FORMAT_U8:
-	case SNDRV_PCM_FORMAT_S8:
-		bfs = 16;
-		break;
-	case SNDRV_PCM_FORMAT_U16_LE:
-	case SNDRV_PCM_FORMAT_S16_LE:
-		bfs = 32;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/* The Fvco for WM8580 PLLs must fall within [90,100]MHz.
-	 * This criterion can't be met if we request PLL output
-	 * as {8000x256, 64000x256, 11025x256}Hz.
-	 * As a wayout, we rather change rfs to a minimum value that
-	 * results in (params_rate(params) * rfs), and itself, acceptable
-	 * to both - the CODEC and the CPU.
-	 */
-	switch (params_rate(params)) {
-	case 16000:
-	case 22050:
-	case 32000:
-	case 44100:
-	case 48000:
-	case 88200:
-	case 96000:
-		rfs = 256;
-		break;
-	case 64000:
-		rfs = 384;
-		break;
-	case 8000:
-	case 11025:
-		rfs = 512;
-		break;
-	default:
-		return -EINVAL;
-	}
-	pll_out = params_rate(params) * rfs;
-
-	/* Set the Codec DAI configuration */
-	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S
-					 | SND_SOC_DAIFMT_NB_NF
-					 | SND_SOC_DAIFMT_CBM_CFM);
-	if (ret < 0)
-		return ret;
-
-	/* Set the AP DAI configuration */
-	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S
-					 | SND_SOC_DAIFMT_NB_NF
-					 | SND_SOC_DAIFMT_CBM_CFM);
-	if (ret < 0)
-		return ret;
-
-	/* Set WM8580 to drive MCLK from its PLLA */
-	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK,
-					WM8580_CLKSRC_PLLA);
-	if (ret < 0)
-		return ret;
-
-	ret = snd_soc_dai_set_pll(codec_dai, WM8580_PLLA, 0,
-					SMDK_WM8580_FREQ, pll_out);
-	if (ret < 0)
-		return ret;
-
-	ret = snd_soc_dai_set_sysclk(codec_dai, WM8580_CLKSRC_PLLA,
-				     pll_out, SND_SOC_CLOCK_IN);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-/*
- * SMDK WM8580 DAI operations.
- */
-static struct snd_soc_ops smdk_ops = {
-	.hw_params = smdk_hw_params,
-};
-
-/* SMDK Playback widgets */
-static const struct snd_soc_dapm_widget wm8580_dapm_widgets_pbk[] = {
-	SND_SOC_DAPM_HP("Front", NULL),
-	SND_SOC_DAPM_HP("Center+Sub", NULL),
-	SND_SOC_DAPM_HP("Rear", NULL),
-};
-
-/* SMDK Capture widgets */
-static const struct snd_soc_dapm_widget wm8580_dapm_widgets_cpt[] = {
-	SND_SOC_DAPM_MIC("MicIn", NULL),
-	SND_SOC_DAPM_LINE("LineIn", NULL),
-};
-
-/* SMDK-PAIFTX connections */
-static const struct snd_soc_dapm_route audio_map_tx[] = {
-	/* MicIn feeds AINL */
-	{"AINL", NULL, "MicIn"},
-
-	/* LineIn feeds AINL/R */
-	{"AINL", NULL, "LineIn"},
-	{"AINR", NULL, "LineIn"},
-};
-
-/* SMDK-PAIFRX connections */
-static const struct snd_soc_dapm_route audio_map_rx[] = {
-	/* Front Left/Right are fed VOUT1L/R */
-	{"Front", NULL, "VOUT1L"},
-	{"Front", NULL, "VOUT1R"},
-
-	/* Center/Sub are fed VOUT2L/R */
-	{"Center+Sub", NULL, "VOUT2L"},
-	{"Center+Sub", NULL, "VOUT2R"},
-
-	/* Rear Left/Right are fed VOUT3L/R */
-	{"Rear", NULL, "VOUT3L"},
-	{"Rear", NULL, "VOUT3R"},
-};
-
-static int smdk_wm8580_init_paiftx(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_soc_codec *codec = rtd->codec;
-
-	/* Add smdk specific Capture widgets */
-	snd_soc_dapm_new_controls(codec, wm8580_dapm_widgets_cpt,
-				  ARRAY_SIZE(wm8580_dapm_widgets_cpt));
-
-	/* Set up PAIFTX audio path */
-	snd_soc_dapm_add_routes(codec, audio_map_tx, ARRAY_SIZE(audio_map_tx));
-
-	/* Enabling the microphone requires the fitting of a 0R
-	 * resistor to connect the line from the microphone jack.
-	 */
-	snd_soc_dapm_disable_pin(codec, "MicIn");
-
-	/* signal a DAPM event */
-	snd_soc_dapm_sync(codec);
-
-	return 0;
-}
-
-static int smdk_wm8580_init_paifrx(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_soc_codec *codec = rtd->codec;
-
-	/* Add smdk specific Playback widgets */
-	snd_soc_dapm_new_controls(codec, wm8580_dapm_widgets_pbk,
-				  ARRAY_SIZE(wm8580_dapm_widgets_pbk));
-
-	/* Set up PAIFRX audio path */
-	snd_soc_dapm_add_routes(codec, audio_map_rx, ARRAY_SIZE(audio_map_rx));
-
-	/* signal a DAPM event */
-	snd_soc_dapm_sync(codec);
-
-	return 0;
-}
-
-enum {
-	PRI_PLAYBACK = 0,
-	PRI_CAPTURE,
-	SEC_PLAYBACK,
-};
-
-static struct snd_soc_dai_link smdk_dai[] = {
-	[PRI_PLAYBACK] = { /* Primary Playback i/f */
-		.name = "WM8580 PAIF RX",
-		.stream_name = "Playback",
-		.cpu_dai_name = "samsung-i2s.2",
-		.codec_dai_name = "wm8580-hifi-playback",
-		.platform_name = "samsung-audio",
-		.codec_name = "wm8580-codec.0-001b",
-		.init = smdk_wm8580_init_paifrx,
-		.ops = &smdk_ops,
-	},
-	[PRI_CAPTURE] = { /* Primary Capture i/f */
-		.name = "WM8580 PAIF TX",
-		.stream_name = "Capture",
-		.cpu_dai_name = "samsung-i2s.2",
-		.codec_dai_name = "wm8580-hifi-capture",
-		.platform_name = "samsung-audio",
-		.codec_name = "wm8580-codec.0-001b",
-		.init = smdk_wm8580_init_paiftx,
-		.ops = &smdk_ops,
-	},
-	[SEC_PLAYBACK] = { /* Sec_Fifo Playback i/f */
-		.name = "Sec_FIFO TX",
-		.stream_name = "Playback",
-		.cpu_dai_name = "samsung-i2s.x",
-		.codec_dai_name = "wm8580-hifi-playback",
-		.platform_name = "samsung-audio",
-		.codec_name = "wm8580-codec.0-001b",
-		.init = smdk_wm8580_init_paifrx,
-		.ops = &smdk_ops,
-	},
-};
-
-static struct snd_soc_card smdk = {
-	.name = "SMDK-I2S",
-	.dai_link = smdk_dai,
-	.num_links = 2,
-};
-
-static struct platform_device *smdk_snd_device;
-
-static int __init smdk_audio_init(void)
-{
-	int ret;
-	char *str;
-
-	if (machine_is_smdkc100()) {
-		smdk.num_links = 3;
-		/* S5PC100 has I2S0 as v5 */
-		str = (char *)smdk_dai[PRI_PLAYBACK].cpu_dai_name;
-		str[strlen(str) - 1] = '0';
-		str = (char *)smdk_dai[PRI_CAPTURE].cpu_dai_name;
-		str[strlen(str) - 1] = '0';
-		/* Secondary is at offset MAX_I2S from Primary */
-		str = (char *)smdk_dai[SEC_PLAYBACK].cpu_dai_name;
-		str[strlen(str) - 1] = '0' + MAX_I2S;
-	}
-
-	smdk_snd_device = platform_device_alloc("soc-audio", -1);
-	if (!smdk_snd_device)
-		return -ENOMEM;
-
-	platform_set_drvdata(smdk_snd_device, &smdk);
-	ret = platform_device_add(smdk_snd_device);
-
-	if (ret)
-		platform_device_put(smdk_snd_device);
-
-	return ret;
-}
-module_init(smdk_audio_init);
-
-MODULE_AUTHOR("Jaswinder Singh, jassi.brar@samsung.com");
-MODULE_DESCRIPTION("ALSA SoC SMDK WM8580");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/smdk_wm9713.c b/sound/soc/s3c24xx/smdk_wm9713.c
deleted file mode 100644
index 7ce2430..0000000
--- a/sound/soc/s3c24xx/smdk_wm9713.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * smdk_wm9713.c  --  SoC audio for SMDK
- *
- * Copyright 2010 Samsung Electronics Co. Ltd.
- * Author: Jaswinder Singh Brar <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <sound/soc.h>
-
-#include "dma.h"
-#include "ac97.h"
-
-static struct snd_soc_card smdk;
-
-/*
- * Default CFG switch settings to use this driver:
- *
- *   SMDK6410: Set CFG1 1-3 On, CFG2 1-4 Off
- *   SMDKC100: Set CFG6 1-3 On, CFG7 1   On
- *   SMDKC110: Set CFGB10 1-2 Off, CFGB12 1-3 On
- *   SMDKV210: Set CFGB10 1-2 Off, CFGB12 1-3 On
- */
-
-/*
- Playback (HeadPhone):-
-	$ amixer sset 'Headphone' unmute
-	$ amixer sset 'Right Headphone Out Mux' 'Headphone'
-	$ amixer sset 'Left Headphone Out Mux' 'Headphone'
-	$ amixer sset 'Right HP Mixer PCM' unmute
-	$ amixer sset 'Left HP Mixer PCM' unmute
-
- Capture (LineIn):-
-	$ amixer sset 'Right Capture Source' 'Line'
-	$ amixer sset 'Left Capture Source' 'Line'
-*/
-
-static struct snd_soc_dai_link smdk_dai = {
-	.name = "AC97",
-	.stream_name = "AC97 PCM",
-	.platform_name = "samsung-audio",
-	.cpu_dai_name = "samsung-ac97",
-	.codec_dai_name = "wm9713-hifi",
-	.codec_name = "wm9713-codec",
-};
-
-static struct snd_soc_card smdk = {
-	.name = "SMDK WM9713",
-	.dai_link = &smdk_dai,
-	.num_links = 1,
-};
-
-static struct platform_device *smdk_snd_wm9713_device;
-static struct platform_device *smdk_snd_ac97_device;
-
-static int __init smdk_init(void)
-{
-	int ret;
-
-	smdk_snd_wm9713_device = platform_device_alloc("wm9713-codec", -1);
-	if (!smdk_snd_wm9713_device)
-		return -ENOMEM;
-
-	ret = platform_device_add(smdk_snd_wm9713_device);
-	if (ret)
-		goto err;
-
-	smdk_snd_ac97_device = platform_device_alloc("soc-audio", -1);
-	if (!smdk_snd_ac97_device) {
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	platform_set_drvdata(smdk_snd_ac97_device, &smdk);
-
-	ret = platform_device_add(smdk_snd_ac97_device);
-	if (ret) {
-		platform_device_put(smdk_snd_ac97_device);
-		goto err;
-	}
-
-	return 0;
-err:
-	platform_device_put(smdk_snd_wm9713_device);
-	return ret;
-}
-
-static void __exit smdk_exit(void)
-{
-	platform_device_unregister(smdk_snd_ac97_device);
-	platform_device_unregister(smdk_snd_wm9713_device);
-}
-
-module_init(smdk_init);
-module_exit(smdk_exit);
-
-/* Module information */
-MODULE_AUTHOR("Jaswinder Singh Brar, jassi.brar@samsung.com");
-MODULE_DESCRIPTION("ALSA SoC SMDK+WM9713");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/spdif.c b/sound/soc/s3c24xx/spdif.c
deleted file mode 100644
index dc85df3..0000000
--- a/sound/soc/s3c24xx/spdif.c
+++ /dev/null
@@ -1,501 +0,0 @@
-/* sound/soc/s3c24xx/spdif.c
- *
- * ALSA SoC Audio Layer - Samsung S/PDIF Controller driver
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-
-#include <plat/audio.h>
-#include <mach/dma.h>
-
-#include "dma.h"
-#include "spdif.h"
-
-/* Registers */
-#define CLKCON				0x00
-#define CON				0x04
-#define BSTAS				0x08
-#define CSTAS				0x0C
-#define DATA_OUTBUF			0x10
-#define DCNT				0x14
-#define BSTAS_S				0x18
-#define DCNT_S				0x1C
-
-#define CLKCTL_MASK			0x7
-#define CLKCTL_MCLK_EXT			(0x1 << 2)
-#define CLKCTL_PWR_ON			(0x1 << 0)
-
-#define CON_MASK			0x3ffffff
-#define CON_FIFO_TH_SHIFT		19
-#define CON_FIFO_TH_MASK		(0x7 << 19)
-#define CON_USERDATA_23RDBIT		(0x1 << 12)
-
-#define CON_SW_RESET			(0x1 << 5)
-
-#define CON_MCLKDIV_MASK		(0x3 << 3)
-#define CON_MCLKDIV_256FS		(0x0 << 3)
-#define CON_MCLKDIV_384FS		(0x1 << 3)
-#define CON_MCLKDIV_512FS		(0x2 << 3)
-
-#define CON_PCM_MASK			(0x3 << 1)
-#define CON_PCM_16BIT			(0x0 << 1)
-#define CON_PCM_20BIT			(0x1 << 1)
-#define CON_PCM_24BIT			(0x2 << 1)
-
-#define CON_PCM_DATA			(0x1 << 0)
-
-#define CSTAS_MASK			0x3fffffff
-#define CSTAS_SAMP_FREQ_MASK		(0xF << 24)
-#define CSTAS_SAMP_FREQ_44		(0x0 << 24)
-#define CSTAS_SAMP_FREQ_48		(0x2 << 24)
-#define CSTAS_SAMP_FREQ_32		(0x3 << 24)
-#define CSTAS_SAMP_FREQ_96		(0xA << 24)
-
-#define CSTAS_CATEGORY_MASK		(0xFF << 8)
-#define CSTAS_CATEGORY_CODE_CDP		(0x01 << 8)
-
-#define CSTAS_NO_COPYRIGHT		(0x1 << 2)
-
-/**
- * struct samsung_spdif_info - Samsung S/PDIF Controller information
- * @lock: Spin lock for S/PDIF.
- * @dev: The parent device passed to use from the probe.
- * @regs: The pointer to the device register block.
- * @clk_rate: Current clock rate for calcurate ratio.
- * @pclk: The peri-clock pointer for spdif master operation.
- * @sclk: The source clock pointer for making sync signals.
- * @save_clkcon: Backup clkcon reg. in suspend.
- * @save_con: Backup con reg. in suspend.
- * @save_cstas: Backup cstas reg. in suspend.
- * @dma_playback: DMA information for playback channel.
- */
-struct samsung_spdif_info {
-	spinlock_t	lock;
-	struct device	*dev;
-	void __iomem	*regs;
-	unsigned long	clk_rate;
-	struct clk	*pclk;
-	struct clk	*sclk;
-	u32		saved_clkcon;
-	u32		saved_con;
-	u32		saved_cstas;
-	struct s3c_dma_params	*dma_playback;
-};
-
-static struct s3c2410_dma_client spdif_dma_client_out = {
-	.name		= "S/PDIF Stereo out",
-};
-
-static struct s3c_dma_params spdif_stereo_out;
-static struct samsung_spdif_info spdif_info;
-
-static inline struct samsung_spdif_info *to_info(struct snd_soc_dai *cpu_dai)
-{
-	return snd_soc_dai_get_drvdata(cpu_dai);
-}
-
-static void spdif_snd_txctrl(struct samsung_spdif_info *spdif, int on)
-{
-	void __iomem *regs = spdif->regs;
-	u32 clkcon;
-
-	dev_dbg(spdif->dev, "Entered %s\n", __func__);
-
-	clkcon = readl(regs + CLKCON) & CLKCTL_MASK;
-	if (on)
-		writel(clkcon | CLKCTL_PWR_ON, regs + CLKCON);
-	else
-		writel(clkcon & ~CLKCTL_PWR_ON, regs + CLKCON);
-}
-
-static int spdif_set_sysclk(struct snd_soc_dai *cpu_dai,
-				int clk_id, unsigned int freq, int dir)
-{
-	struct samsung_spdif_info *spdif = to_info(cpu_dai);
-	u32 clkcon;
-
-	dev_dbg(spdif->dev, "Entered %s\n", __func__);
-
-	clkcon = readl(spdif->regs + CLKCON);
-
-	if (clk_id == SND_SOC_SPDIF_INT_MCLK)
-		clkcon &= ~CLKCTL_MCLK_EXT;
-	else
-		clkcon |= CLKCTL_MCLK_EXT;
-
-	writel(clkcon, spdif->regs + CLKCON);
-
-	spdif->clk_rate = freq;
-
-	return 0;
-}
-
-static int spdif_trigger(struct snd_pcm_substream *substream, int cmd,
-				struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct samsung_spdif_info *spdif = to_info(rtd->cpu_dai);
-	unsigned long flags;
-
-	dev_dbg(spdif->dev, "Entered %s\n", __func__);
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-	case SNDRV_PCM_TRIGGER_RESUME:
-	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		spin_lock_irqsave(&spdif->lock, flags);
-		spdif_snd_txctrl(spdif, 1);
-		spin_unlock_irqrestore(&spdif->lock, flags);
-		break;
-	case SNDRV_PCM_TRIGGER_STOP:
-	case SNDRV_PCM_TRIGGER_SUSPEND:
-	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		spin_lock_irqsave(&spdif->lock, flags);
-		spdif_snd_txctrl(spdif, 0);
-		spin_unlock_irqrestore(&spdif->lock, flags);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int spdif_sysclk_ratios[] = {
-	512, 384, 256,
-};
-
-static int spdif_hw_params(struct snd_pcm_substream *substream,
-				struct snd_pcm_hw_params *params,
-				struct snd_soc_dai *socdai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct samsung_spdif_info *spdif = to_info(rtd->cpu_dai);
-	void __iomem *regs = spdif->regs;
-	struct s3c_dma_params *dma_data;
-	u32 con, clkcon, cstas;
-	unsigned long flags;
-	int i, ratio;
-
-	dev_dbg(spdif->dev, "Entered %s\n", __func__);
-
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		dma_data = spdif->dma_playback;
-	else {
-		dev_err(spdif->dev, "Capture is not supported\n");
-		return -EINVAL;
-	}
-
-	snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data);
-
-	spin_lock_irqsave(&spdif->lock, flags);
-
-	con = readl(regs + CON) & CON_MASK;
-	cstas = readl(regs + CSTAS) & CSTAS_MASK;
-	clkcon = readl(regs + CLKCON) & CLKCTL_MASK;
-
-	con &= ~CON_FIFO_TH_MASK;
-	con |= (0x7 << CON_FIFO_TH_SHIFT);
-	con |= CON_USERDATA_23RDBIT;
-	con |= CON_PCM_DATA;
-
-	con &= ~CON_PCM_MASK;
-	switch (params_format(params)) {
-	case SNDRV_PCM_FORMAT_S16_LE:
-		con |= CON_PCM_16BIT;
-		break;
-	default:
-		dev_err(spdif->dev, "Unsupported data size.\n");
-		goto err;
-	}
-
-	ratio = spdif->clk_rate / params_rate(params);
-	for (i = 0; i < ARRAY_SIZE(spdif_sysclk_ratios); i++)
-		if (ratio == spdif_sysclk_ratios[i])
-			break;
-	if (i == ARRAY_SIZE(spdif_sysclk_ratios)) {
-		dev_err(spdif->dev, "Invalid clock ratio %ld/%d\n",
-				spdif->clk_rate, params_rate(params));
-		goto err;
-	}
-
-	con &= ~CON_MCLKDIV_MASK;
-	switch (ratio) {
-	case 256:
-		con |= CON_MCLKDIV_256FS;
-		break;
-	case 384:
-		con |= CON_MCLKDIV_384FS;
-		break;
-	case 512:
-		con |= CON_MCLKDIV_512FS;
-		break;
-	}
-
-	cstas &= ~CSTAS_SAMP_FREQ_MASK;
-	switch (params_rate(params)) {
-	case 44100:
-		cstas |= CSTAS_SAMP_FREQ_44;
-		break;
-	case 48000:
-		cstas |= CSTAS_SAMP_FREQ_48;
-		break;
-	case 32000:
-		cstas |= CSTAS_SAMP_FREQ_32;
-		break;
-	case 96000:
-		cstas |= CSTAS_SAMP_FREQ_96;
-		break;
-	default:
-		dev_err(spdif->dev, "Invalid sampling rate %d\n",
-				params_rate(params));
-		goto err;
-	}
-
-	cstas &= ~CSTAS_CATEGORY_MASK;
-	cstas |= CSTAS_CATEGORY_CODE_CDP;
-	cstas |= CSTAS_NO_COPYRIGHT;
-
-	writel(con, regs + CON);
-	writel(cstas, regs + CSTAS);
-	writel(clkcon, regs + CLKCON);
-
-	spin_unlock_irqrestore(&spdif->lock, flags);
-
-	return 0;
-err:
-	spin_unlock_irqrestore(&spdif->lock, flags);
-	return -EINVAL;
-}
-
-static void spdif_shutdown(struct snd_pcm_substream *substream,
-				struct snd_soc_dai *dai)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct samsung_spdif_info *spdif = to_info(rtd->cpu_dai);
-	void __iomem *regs = spdif->regs;
-	u32 con, clkcon;
-
-	dev_dbg(spdif->dev, "Entered %s\n", __func__);
-
-	con = readl(regs + CON) & CON_MASK;
-	clkcon = readl(regs + CLKCON) & CLKCTL_MASK;
-
-	writel(con | CON_SW_RESET, regs + CON);
-	cpu_relax();
-
-	writel(clkcon & ~CLKCTL_PWR_ON, regs + CLKCON);
-}
-
-#ifdef CONFIG_PM
-static int spdif_suspend(struct snd_soc_dai *cpu_dai)
-{
-	struct samsung_spdif_info *spdif = to_info(cpu_dai);
-	u32 con = spdif->saved_con;
-
-	dev_dbg(spdif->dev, "Entered %s\n", __func__);
-
-	spdif->saved_clkcon = readl(spdif->regs	+ CLKCON) & CLKCTL_MASK;
-	spdif->saved_con = readl(spdif->regs + CON) & CON_MASK;
-	spdif->saved_cstas = readl(spdif->regs + CSTAS) & CSTAS_MASK;
-
-	writel(con | CON_SW_RESET, spdif->regs + CON);
-	cpu_relax();
-
-	return 0;
-}
-
-static int spdif_resume(struct snd_soc_dai *cpu_dai)
-{
-	struct samsung_spdif_info *spdif = to_info(cpu_dai);
-
-	dev_dbg(spdif->dev, "Entered %s\n", __func__);
-
-	writel(spdif->saved_clkcon, spdif->regs	+ CLKCON);
-	writel(spdif->saved_con, spdif->regs + CON);
-	writel(spdif->saved_cstas, spdif->regs + CSTAS);
-
-	return 0;
-}
-#else
-#define spdif_suspend NULL
-#define spdif_resume NULL
-#endif
-
-static struct snd_soc_dai_ops spdif_dai_ops = {
-	.set_sysclk	= spdif_set_sysclk,
-	.trigger	= spdif_trigger,
-	.hw_params	= spdif_hw_params,
-	.shutdown	= spdif_shutdown,
-};
-
-struct snd_soc_dai_driver samsung_spdif_dai = {
-	.name = "samsung-spdif",
-	.playback = {
-		.stream_name = "S/PDIF Playback",
-		.channels_min = 2,
-		.channels_max = 2,
-		.rates = (SNDRV_PCM_RATE_32000 |
-				SNDRV_PCM_RATE_44100 |
-				SNDRV_PCM_RATE_48000 |
-				SNDRV_PCM_RATE_96000),
-		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
-	.ops = &spdif_dai_ops,
-	.suspend = spdif_suspend,
-	.resume = spdif_resume,
-};
-
-static __devinit int spdif_probe(struct platform_device *pdev)
-{
-	struct s3c_audio_pdata *spdif_pdata;
-	struct resource *mem_res, *dma_res;
-	struct samsung_spdif_info *spdif;
-	int ret;
-
-	spdif_pdata = pdev->dev.platform_data;
-
-	dev_dbg(&pdev->dev, "Entered %s\n", __func__);
-
-	dma_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	if (!dma_res) {
-		dev_err(&pdev->dev, "Unable to get dma resource.\n");
-		return -ENXIO;
-	}
-
-	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem_res) {
-		dev_err(&pdev->dev, "Unable to get register resource.\n");
-		return -ENXIO;
-	}
-
-	if (spdif_pdata && spdif_pdata->cfg_gpio
-			&& spdif_pdata->cfg_gpio(pdev)) {
-		dev_err(&pdev->dev, "Unable to configure GPIO pins\n");
-		return -EINVAL;
-	}
-
-	spdif = &spdif_info;
-	spdif->dev = &pdev->dev;
-
-	spin_lock_init(&spdif->lock);
-
-	spdif->pclk = clk_get(&pdev->dev, "spdif");
-	if (IS_ERR(spdif->pclk)) {
-		dev_err(&pdev->dev, "failed to get peri-clock\n");
-		ret = -ENOENT;
-		goto err0;
-	}
-	clk_enable(spdif->pclk);
-
-	spdif->sclk = clk_get(&pdev->dev, "sclk_spdif");
-	if (IS_ERR(spdif->sclk)) {
-		dev_err(&pdev->dev, "failed to get internal source clock\n");
-		ret = -ENOENT;
-		goto err1;
-	}
-	clk_enable(spdif->sclk);
-
-	/* Request S/PDIF Register's memory region */
-	if (!request_mem_region(mem_res->start,
-				resource_size(mem_res), "samsung-spdif")) {
-		dev_err(&pdev->dev, "Unable to request register region\n");
-		ret = -EBUSY;
-		goto err2;
-	}
-
-	spdif->regs = ioremap(mem_res->start, 0x100);
-	if (spdif->regs == NULL) {
-		dev_err(&pdev->dev, "Cannot ioremap registers\n");
-		ret = -ENXIO;
-		goto err3;
-	}
-
-	dev_set_drvdata(&pdev->dev, spdif);
-
-	ret = snd_soc_register_dai(&pdev->dev, &samsung_spdif_dai);
-	if (ret != 0) {
-		dev_err(&pdev->dev, "fail to register dai\n");
-		goto err4;
-	}
-
-	spdif_stereo_out.dma_size = 2;
-	spdif_stereo_out.client = &spdif_dma_client_out;
-	spdif_stereo_out.dma_addr = mem_res->start + DATA_OUTBUF;
-	spdif_stereo_out.channel = dma_res->start;
-
-	spdif->dma_playback = &spdif_stereo_out;
-
-	return 0;
-
-err4:
-	iounmap(spdif->regs);
-err3:
-	release_mem_region(mem_res->start, resource_size(mem_res));
-err2:
-	clk_disable(spdif->sclk);
-	clk_put(spdif->sclk);
-err1:
-	clk_disable(spdif->pclk);
-	clk_put(spdif->pclk);
-err0:
-	return ret;
-}
-
-static __devexit int spdif_remove(struct platform_device *pdev)
-{
-	struct samsung_spdif_info *spdif = &spdif_info;
-	struct resource *mem_res;
-
-	snd_soc_unregister_dai(&pdev->dev);
-
-	iounmap(spdif->regs);
-
-	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (mem_res)
-		release_mem_region(mem_res->start, resource_size(mem_res));
-
-	clk_disable(spdif->sclk);
-	clk_put(spdif->sclk);
-	clk_disable(spdif->pclk);
-	clk_put(spdif->pclk);
-
-	return 0;
-}
-
-static struct platform_driver samsung_spdif_driver = {
-	.probe	= spdif_probe,
-	.remove	= spdif_remove,
-	.driver	= {
-		.name	= "samsung-spdif",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init spdif_init(void)
-{
-	return platform_driver_register(&samsung_spdif_driver);
-}
-module_init(spdif_init);
-
-static void __exit spdif_exit(void)
-{
-	platform_driver_unregister(&samsung_spdif_driver);
-}
-module_exit(spdif_exit);
-
-MODULE_AUTHOR("Seungwhan Youn, <sw.youn@samsung.com>");
-MODULE_DESCRIPTION("Samsung S/PDIF Controller Driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:samsung-spdif");
diff --git a/sound/soc/s3c24xx/spdif.h b/sound/soc/s3c24xx/spdif.h
deleted file mode 100644
index 3ed5559..0000000
--- a/sound/soc/s3c24xx/spdif.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* sound/soc/s3c24xx/spdif.h
- *
- * ALSA SoC Audio Layer - Samsung S/PDIF Controller driver
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __SND_SOC_SAMSUNG_SPDIF_H
-#define __SND_SOC_SAMSUNG_SPDIF_H	__FILE__
-
-#define SND_SOC_SPDIF_INT_MCLK		0
-#define SND_SOC_SPDIF_EXT_MCLK		1
-
-#endif	/* __SND_SOC_SAMSUNG_SPDIF_H */
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
new file mode 100644
index 0000000..140095e
--- /dev/null
+++ b/sound/soc/samsung/Kconfig
@@ -0,0 +1,154 @@
+config ASOC_SAMSUNG
+	tristate "ASoC support for Samsung"
+	depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210
+	select S3C64XX_DMA if ARCH_S3C64XX
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  the Samsung SoCs' Audio interfaces. You will also need to
+	  select the audio interfaces to support below.
+
+config SND_S3C24XX_I2S
+	tristate
+	select S3C2410_DMA
+
+config SND_S3C_I2SV2_SOC
+	tristate
+
+config SND_S3C2412_SOC_I2S
+	tristate
+	select SND_S3C_I2SV2_SOC
+	select S3C2410_DMA
+
+config SND_SAMSUNG_PCM
+	tristate
+
+config SND_SAMSUNG_AC97
+	tristate
+	select SND_SOC_AC97_BUS
+
+config SND_SAMSUNG_SPDIF
+	tristate
+	select SND_SOC_SPDIF
+
+config SND_SAMSUNG_I2S
+	tristate
+
+config ASOC_SAMSUNG_NEO1973_WM8753
+	tristate "SoC I2S Audio support for NEO1973 - WM8753"
+	depends on ASOC_SAMSUNG && MACH_NEO1973_GTA01
+	select SND_S3C24XX_I2S
+	select SND_SOC_WM8753
+	help
+	  Say Y if you want to add support for SoC audio on smdk2440
+	  with the WM8753.
+
+config ASOC_SAMSUNG_NEO1973_GTA02_WM8753
+	tristate "Audio support for the Openmoko Neo FreeRunner (GTA02)"
+	depends on ASOC_SAMSUNG && MACH_NEO1973_GTA02
+	select SND_S3C24XX_I2S
+	select SND_SOC_WM8753
+	help
+	  This driver provides audio support for the Openmoko Neo FreeRunner
+	  smartphone.
+	  
+config ASOC_SAMSUNG_JIVE_WM8750
+	tristate "SoC I2S Audio support for Jive"
+	depends on ASOC_SAMSUNG && MACH_JIVE
+	select SND_SOC_WM8750
+	select SND_S3C2412_SOC_I2S
+	help
+	  Sat Y if you want to add support for SoC audio on the Jive.
+
+config ASOC_SAMSUNG_SMDK_WM8580
+	tristate "SoC I2S Audio support for WM8580 on SMDK"
+	depends on ASOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100)
+	select SND_SOC_WM8580
+	select SND_SAMSUNG_I2S
+	help
+	  Say Y if you want to add support for SoC audio on the SMDKs.
+
+config ASOC_SAMSUNG_SMDK2443_WM9710
+	tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
+	depends on ASOC_SAMSUNG && MACH_SMDK2443
+	select S3C2410_DMA
+	select AC97_BUS
+	select SND_SOC_AC97_CODEC
+	select SND_SAMSUNG_AC97
+	help
+	  Say Y if you want to add support for SoC audio on smdk2443
+	  with the WM9710.
+
+config ASOC_SAMSUNG_LN2440SBC_ALC650
+	tristate "SoC AC97 Audio support for LN2440SBC - ALC650"
+	depends on ASOC_SAMSUNG && ARCH_S3C2410
+	select S3C2410_DMA
+	select AC97_BUS
+	select SND_SOC_AC97_CODEC
+	select SND_SAMSUNG_AC97
+	help
+	  Say Y if you want to add support for SoC audio on ln2440sbc
+	  with the ALC650.
+
+config ASOC_SAMSUNG_S3C24XX_UDA134X
+	tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
+	depends on ASOC_SAMSUNG && ARCH_S3C2410
+	select SND_S3C24XX_I2S
+	select SND_SOC_L3
+	select SND_SOC_UDA134X
+
+config ASOC_SAMSUNG_SIMTEC
+	tristate
+	help
+	  Internal node for common S3C24XX/Simtec suppor
+
+config ASOC_SAMSUNG_SIMTEC_TLV320AIC23
+	tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
+	depends on ASOC_SAMSUNG && ARCH_S3C2410
+	select SND_S3C24XX_I2S
+	select SND_SOC_TLV320AIC23
+	select ASOC_SAMSUNG_SIMTEC
+
+config ASOC_SAMSUNG_SIMTEC_HERMES
+	tristate "SoC I2S Audio support for Simtec Hermes board"
+	depends on ASOC_SAMSUNG && ARCH_S3C2410
+	select SND_S3C24XX_I2S
+	select SND_SOC_TLV320AIC3X
+	select ASOC_SAMSUNG_SIMTEC
+
+config ASOC_SAMSUNG_RX1950_UDA1380
+	tristate "Audio support for the HP iPAQ RX1950"
+	depends on ASOC_SAMSUNG && MACH_RX1950
+	select SND_S3C24XX_I2S
+	select SND_SOC_UDA1380
+	help
+	  This driver provides audio support for HP iPAQ RX1950 PDA.
+
+config ASOC_SAMSUNG_SMDK_WM9713
+	tristate "SoC AC97 Audio support for SMDK with WM9713"
+	depends on ASOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110)
+	select SND_SOC_WM9713
+	select SND_SAMSUNG_AC97
+	help
+	  Sat Y if you want to add support for SoC audio on the SMDK.
+
+config ASOC_SMARTQ
+	tristate "SoC I2S Audio support for SmartQ board"
+	depends on ASOC_SAMSUNG && MACH_SMARTQ
+	select SND_SAMSUNG_I2S
+	select SND_SOC_WM8750
+
+config ASOC_GONI_AQUILA_WM8994
+	tristate "SoC I2S Audio support for AQUILA/GONI - WM8994"
+	depends on ASOC_SAMSUNG && (MACH_GONI || MACH_AQUILA)
+	select SND_SAMSUNG_I2S
+	select SND_SOC_WM8994
+	help
+	  Say Y if you want to add support for SoC audio on goni or aquila
+	  with the WM8994.
+
+config ASOC_SAMSUNG_SMDK_SPDIF
+	tristate "SoC S/PDIF Audio support for SMDK"
+	depends on SND_S3C24XX_SOC && (MACH_SMDKC100 || MACH_SMDKC110 || MACH_SMDKV210)
+	select SND_SAMSUNG_SPDIF
+	help
+	  Say Y if you want to add support for SoC S/PDIF audio on the SMDK.
diff --git a/sound/soc/samsung/Makefile b/sound/soc/samsung/Makefile
new file mode 100644
index 0000000..0d24f95
--- /dev/null
+++ b/sound/soc/samsung/Makefile
@@ -0,0 +1,51 @@
+# S3c24XX Platform Support
+snd-soc-s3c24xx-objs := dma.o
+snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o
+snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o
+snd-soc-ac97-objs := ac97.o
+snd-soc-s3c-i2s-v2-objs := s3c-i2s-v2.o
+snd-soc-samsung-spdif-objs := spdif.o
+snd-soc-pcm-objs := pcm.o
+snd-soc-i2s-objs := i2s.o
+
+obj-$(CONFIG_ASOC_SAMSUNG) += snd-soc-s3c24xx.o
+obj-$(CONFIG_SND_S3C24XX_I2S) += snd-soc-s3c24xx-i2s.o
+obj-$(CONFIG_SND_SAMSUNG_AC97) += snd-soc-ac97.o
+obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o
+obj-$(CONFIG_SND_S3C_I2SV2_SOC) += snd-soc-s3c-i2s-v2.o
+obj-$(CONFIG_SND_SAMSUNG_SPDIF) += snd-soc-samsung-spdif.o
+obj-$(CONFIG_SND_SAMSUNG_PCM) += snd-soc-pcm.o
+obj-$(CONFIG_SND_SAMSUNG_I2S) += snd-soc-i2s.o
+
+# S3C24XX Machine Support
+snd-soc-jive-wm8750-objs := jive_wm8750.o
+snd-soc-neo1973-wm8753-objs := neo1973_wm8753.o
+snd-soc-neo1973-gta02-wm8753-objs := neo1973_gta02_wm8753.o
+snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o
+snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o
+snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o
+snd-soc-s3c24xx-simtec-objs := s3c24xx_simtec.o
+snd-soc-s3c24xx-simtec-hermes-objs := s3c24xx_simtec_hermes.o
+snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o
+snd-soc-rx1950-uda1380-objs := rx1950_uda1380.o
+snd-soc-smdk-wm8580-objs := smdk_wm8580.o
+snd-soc-smdk-wm9713-objs := smdk_wm9713.o
+snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o
+snd-soc-goni-wm8994-objs := goni_wm8994.o
+snd-soc-smdk-spdif-objs := smdk_spdif.o
+
+obj-$(CONFIG_ASOC_SAMSUNG_JIVE_WM8750) += snd-soc-jive-wm8750.o
+obj-$(CONFIG_ASOC_SAMSUNG_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
+obj-$(CONFIG_ASOC_SAMSUNG_NEO1973_GTA02_WM8753) += snd-soc-neo1973-gta02-wm8753.o
+obj-$(CONFIG_ASOC_SAMSUNG_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o
+obj-$(CONFIG_ASOC_SAMSUNG_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o
+obj-$(CONFIG_ASOC_SAMSUNG_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
+obj-$(CONFIG_ASOC_SAMSUNG_SIMTEC) += snd-soc-s3c24xx-simtec.o
+obj-$(CONFIG_ASOC_SAMSUNG_SIMTEC_HERMES) += snd-soc-s3c24xx-simtec-hermes.o
+obj-$(CONFIG_ASOC_SAMSUNG_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv320aic23.o
+obj-$(CONFIG_ASOC_SAMSUNG_RX1950_UDA1380) += snd-soc-rx1950-uda1380.o
+obj-$(CONFIG_ASOC_SAMSUNG_SMDK_WM8580) += snd-soc-smdk-wm8580.o
+obj-$(CONFIG_ASOC_SAMSUNG_SMDK_WM9713) += snd-soc-smdk-wm9713.o
+obj-$(CONFIG_ASOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o
+obj-$(CONFIG_ASOC_SAMSUNG_SMDK_SPDIF) += snd-soc-smdk-spdif.o
+obj-$(CONFIG_ASOC_GONI_AQUILA_WM8994) += snd-soc-goni-wm8994.o
diff --git a/sound/soc/samsung/ac97.c b/sound/soc/samsung/ac97.c
new file mode 100644
index 0000000..4770a95
--- /dev/null
+++ b/sound/soc/samsung/ac97.c
@@ -0,0 +1,520 @@
+/* sound/soc/samsung/ac97.c
+ *
+ * ALSA SoC Audio Layer - S3C AC97 Controller driver
+ * 	Evolved from s3c2443-ac97.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ * 	Author: Jaswinder Singh <jassi.brar@samsung.com>
+ * 	Credits: Graeme Gregory, Sean Choi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+
+#include <sound/soc.h>
+
+#include <plat/regs-ac97.h>
+#include <mach/dma.h>
+#include <plat/audio.h>
+
+#include "dma.h"
+#include "ac97.h"
+
+#define AC_CMD_ADDR(x) (x << 16)
+#define AC_CMD_DATA(x) (x & 0xffff)
+
+struct s3c_ac97_info {
+	struct clk         *ac97_clk;
+	void __iomem	   *regs;
+	struct mutex       lock;
+	struct completion  done;
+};
+static struct s3c_ac97_info s3c_ac97;
+
+static struct s3c2410_dma_client s3c_dma_client_out = {
+	.name = "AC97 PCMOut"
+};
+
+static struct s3c2410_dma_client s3c_dma_client_in = {
+	.name = "AC97 PCMIn"
+};
+
+static struct s3c2410_dma_client s3c_dma_client_micin = {
+	.name = "AC97 MicIn"
+};
+
+static struct s3c_dma_params s3c_ac97_pcm_out = {
+	.client		= &s3c_dma_client_out,
+	.dma_size	= 4,
+};
+
+static struct s3c_dma_params s3c_ac97_pcm_in = {
+	.client		= &s3c_dma_client_in,
+	.dma_size	= 4,
+};
+
+static struct s3c_dma_params s3c_ac97_mic_in = {
+	.client		= &s3c_dma_client_micin,
+	.dma_size	= 4,
+};
+
+static void s3c_ac97_activate(struct snd_ac97 *ac97)
+{
+	u32 ac_glbctrl, stat;
+
+	stat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT) & 0x7;
+	if (stat == S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE)
+		return; /* Return if already active */
+
+	INIT_COMPLETION(s3c_ac97.done);
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	ac_glbctrl = S3C_AC97_GLBCTRL_ACLINKON;
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	msleep(1);
+
+	ac_glbctrl |= S3C_AC97_GLBCTRL_TRANSFERDATAENABLE;
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	msleep(1);
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE;
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+	if (!wait_for_completion_timeout(&s3c_ac97.done, HZ))
+		pr_err("AC97: Unable to activate!");
+}
+
+static unsigned short s3c_ac97_read(struct snd_ac97 *ac97,
+	unsigned short reg)
+{
+	u32 ac_glbctrl, ac_codec_cmd;
+	u32 stat, addr, data;
+
+	mutex_lock(&s3c_ac97.lock);
+
+	s3c_ac97_activate(ac97);
+
+	INIT_COMPLETION(s3c_ac97.done);
+
+	ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+	ac_codec_cmd = S3C_AC97_CODEC_CMD_READ | AC_CMD_ADDR(reg);
+	writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+
+	udelay(50);
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE;
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+	if (!wait_for_completion_timeout(&s3c_ac97.done, HZ))
+		pr_err("AC97: Unable to read!");
+
+	stat = readl(s3c_ac97.regs + S3C_AC97_STAT);
+	addr = (stat >> 16) & 0x7f;
+	data = (stat & 0xffff);
+
+	if (addr != reg)
+		pr_err("ac97: req addr = %02x, rep addr = %02x\n",
+			reg, addr);
+
+	mutex_unlock(&s3c_ac97.lock);
+
+	return (unsigned short)data;
+}
+
+static void s3c_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+	unsigned short val)
+{
+	u32 ac_glbctrl, ac_codec_cmd;
+
+	mutex_lock(&s3c_ac97.lock);
+
+	s3c_ac97_activate(ac97);
+
+	INIT_COMPLETION(s3c_ac97.done);
+
+	ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+	ac_codec_cmd = AC_CMD_ADDR(reg) | AC_CMD_DATA(val);
+	writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+
+	udelay(50);
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	ac_glbctrl |= S3C_AC97_GLBCTRL_CODECREADYIE;
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+	if (!wait_for_completion_timeout(&s3c_ac97.done, HZ))
+		pr_err("AC97: Unable to write!");
+
+	ac_codec_cmd = readl(s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+	ac_codec_cmd |= S3C_AC97_CODEC_CMD_READ;
+	writel(ac_codec_cmd, s3c_ac97.regs + S3C_AC97_CODEC_CMD);
+
+	mutex_unlock(&s3c_ac97.lock);
+}
+
+static void s3c_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	pr_debug("AC97: Cold reset\n");
+	writel(S3C_AC97_GLBCTRL_COLDRESET,
+			s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	msleep(1);
+
+	writel(0, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	msleep(1);
+}
+
+static void s3c_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	u32 stat;
+
+	stat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT) & 0x7;
+	if (stat == S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE)
+		return; /* Return if already active */
+
+	pr_debug("AC97: Warm reset\n");
+
+	writel(S3C_AC97_GLBCTRL_WARMRESET, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	msleep(1);
+
+	writel(0, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	msleep(1);
+
+	s3c_ac97_activate(ac97);
+}
+
+static irqreturn_t s3c_ac97_irq(int irq, void *dev_id)
+{
+	u32 ac_glbctrl, ac_glbstat;
+
+	ac_glbstat = readl(s3c_ac97.regs + S3C_AC97_GLBSTAT);
+
+	if (ac_glbstat & S3C_AC97_GLBSTAT_CODECREADY) {
+
+		ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+		ac_glbctrl &= ~S3C_AC97_GLBCTRL_CODECREADYIE;
+		writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+		complete(&s3c_ac97.done);
+	}
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	ac_glbctrl |= (1<<30); /* Clear interrupt */
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+	return IRQ_HANDLED;
+}
+
+struct snd_ac97_bus_ops soc_ac97_ops = {
+	.read       = s3c_ac97_read,
+	.write      = s3c_ac97_write,
+	.warm_reset = s3c_ac97_warm_reset,
+	.reset      = s3c_ac97_cold_reset,
+};
+EXPORT_SYMBOL_GPL(soc_ac97_ops);
+
+static int s3c_ac97_hw_params(struct snd_pcm_substream *substream,
+				  struct snd_pcm_hw_params *params,
+				  struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct s3c_dma_params *dma_data;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dma_data = &s3c_ac97_pcm_out;
+	else
+		dma_data = &s3c_ac97_pcm_in;
+
+	snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
+
+	return 0;
+}
+
+static int s3c_ac97_trigger(struct snd_pcm_substream *substream, int cmd,
+				struct snd_soc_dai *dai)
+{
+	u32 ac_glbctrl;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s3c_dma_params *dma_data =
+		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+		ac_glbctrl &= ~S3C_AC97_GLBCTRL_PCMINTM_MASK;
+	else
+		ac_glbctrl &= ~S3C_AC97_GLBCTRL_PCMOUTTM_MASK;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+			ac_glbctrl |= S3C_AC97_GLBCTRL_PCMINTM_DMA;
+		else
+			ac_glbctrl |= S3C_AC97_GLBCTRL_PCMOUTTM_DMA;
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		break;
+	}
+
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+	s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
+
+	return 0;
+}
+
+static int s3c_ac97_hw_mic_params(struct snd_pcm_substream *substream,
+				      struct snd_pcm_hw_params *params,
+				      struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		return -ENODEV;
+	else
+		snd_soc_dai_set_dma_data(cpu_dai, substream, &s3c_ac97_mic_in);
+
+	return 0;
+}
+
+static int s3c_ac97_mic_trigger(struct snd_pcm_substream *substream,
+				    int cmd, struct snd_soc_dai *dai)
+{
+	u32 ac_glbctrl;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s3c_dma_params *dma_data =
+		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+
+	ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
+	ac_glbctrl &= ~S3C_AC97_GLBCTRL_MICINTM_MASK;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		ac_glbctrl |= S3C_AC97_GLBCTRL_MICINTM_DMA;
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		break;
+	}
+
+	writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
+
+	s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
+
+	return 0;
+}
+
+static struct snd_soc_dai_ops s3c_ac97_dai_ops = {
+	.hw_params	= s3c_ac97_hw_params,
+	.trigger	= s3c_ac97_trigger,
+};
+
+static struct snd_soc_dai_ops s3c_ac97_mic_dai_ops = {
+	.hw_params	= s3c_ac97_hw_mic_params,
+	.trigger	= s3c_ac97_mic_trigger,
+};
+
+static struct snd_soc_dai_driver s3c_ac97_dai[] = {
+	[S3C_AC97_DAI_PCM] = {
+		.name =	"samsung-ac97",
+		.ac97_control = 1,
+		.playback = {
+			.stream_name = "AC97 Playback",
+			.channels_min = 2,
+			.channels_max = 2,
+			.rates = SNDRV_PCM_RATE_8000_48000,
+			.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.capture = {
+			.stream_name = "AC97 Capture",
+			.channels_min = 2,
+			.channels_max = 2,
+			.rates = SNDRV_PCM_RATE_8000_48000,
+			.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.ops = &s3c_ac97_dai_ops,
+	},
+	[S3C_AC97_DAI_MIC] = {
+		.name = "samsung-ac97-mic",
+		.ac97_control = 1,
+		.capture = {
+			.stream_name = "AC97 Mic Capture",
+			.channels_min = 1,
+			.channels_max = 1,
+			.rates = SNDRV_PCM_RATE_8000_48000,
+			.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+		.ops = &s3c_ac97_mic_dai_ops,
+	},
+};
+
+static __devinit int s3c_ac97_probe(struct platform_device *pdev)
+{
+	struct resource *mem_res, *dmatx_res, *dmarx_res, *dmamic_res, *irq_res;
+	struct s3c_audio_pdata *ac97_pdata;
+	int ret;
+
+	ac97_pdata = pdev->dev.platform_data;
+	if (!ac97_pdata || !ac97_pdata->cfg_gpio) {
+		dev_err(&pdev->dev, "cfg_gpio callback not provided!\n");
+		return -EINVAL;
+	}
+
+	/* Check for availability of necessary resource */
+	dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!dmatx_res) {
+		dev_err(&pdev->dev, "Unable to get AC97-TX dma resource\n");
+		return -ENXIO;
+	}
+
+	dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (!dmarx_res) {
+		dev_err(&pdev->dev, "Unable to get AC97-RX dma resource\n");
+		return -ENXIO;
+	}
+
+	dmamic_res = platform_get_resource(pdev, IORESOURCE_DMA, 2);
+	if (!dmamic_res) {
+		dev_err(&pdev->dev, "Unable to get AC97-MIC dma resource\n");
+		return -ENXIO;
+	}
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem_res) {
+		dev_err(&pdev->dev, "Unable to get register resource\n");
+		return -ENXIO;
+	}
+
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq_res) {
+		dev_err(&pdev->dev, "AC97 IRQ not provided!\n");
+		return -ENXIO;
+	}
+
+	if (!request_mem_region(mem_res->start,
+				resource_size(mem_res), "ac97")) {
+		dev_err(&pdev->dev, "Unable to request register region\n");
+		return -EBUSY;
+	}
+
+	s3c_ac97_pcm_out.channel = dmatx_res->start;
+	s3c_ac97_pcm_out.dma_addr = mem_res->start + S3C_AC97_PCM_DATA;
+	s3c_ac97_pcm_in.channel = dmarx_res->start;
+	s3c_ac97_pcm_in.dma_addr = mem_res->start + S3C_AC97_PCM_DATA;
+	s3c_ac97_mic_in.channel = dmamic_res->start;
+	s3c_ac97_mic_in.dma_addr = mem_res->start + S3C_AC97_MIC_DATA;
+
+	init_completion(&s3c_ac97.done);
+	mutex_init(&s3c_ac97.lock);
+
+	s3c_ac97.regs = ioremap(mem_res->start, resource_size(mem_res));
+	if (s3c_ac97.regs == NULL) {
+		dev_err(&pdev->dev, "Unable to ioremap register region\n");
+		ret = -ENXIO;
+		goto err1;
+	}
+
+	s3c_ac97.ac97_clk = clk_get(&pdev->dev, "ac97");
+	if (IS_ERR(s3c_ac97.ac97_clk)) {
+		dev_err(&pdev->dev, "ac97 failed to get ac97_clock\n");
+		ret = -ENODEV;
+		goto err2;
+	}
+	clk_enable(s3c_ac97.ac97_clk);
+
+	if (ac97_pdata->cfg_gpio(pdev)) {
+		dev_err(&pdev->dev, "Unable to configure gpio\n");
+		ret = -EINVAL;
+		goto err3;
+	}
+
+	ret = request_irq(irq_res->start, s3c_ac97_irq,
+					IRQF_DISABLED, "AC97", NULL);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "ac97: interrupt request failed.\n");
+		goto err4;
+	}
+
+	ret = snd_soc_register_dais(&pdev->dev, s3c_ac97_dai,
+			ARRAY_SIZE(s3c_ac97_dai));
+	if (ret)
+		goto err5;
+
+	return 0;
+
+err5:
+	free_irq(irq_res->start, NULL);
+err4:
+err3:
+	clk_disable(s3c_ac97.ac97_clk);
+	clk_put(s3c_ac97.ac97_clk);
+err2:
+	iounmap(s3c_ac97.regs);
+err1:
+	release_mem_region(mem_res->start, resource_size(mem_res));
+
+	return ret;
+}
+
+static __devexit int s3c_ac97_remove(struct platform_device *pdev)
+{
+	struct resource *mem_res, *irq_res;
+
+	snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(s3c_ac97_dai));
+
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (irq_res)
+		free_irq(irq_res->start, NULL);
+
+	clk_disable(s3c_ac97.ac97_clk);
+	clk_put(s3c_ac97.ac97_clk);
+
+	iounmap(s3c_ac97.regs);
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (mem_res)
+		release_mem_region(mem_res->start, resource_size(mem_res));
+
+	return 0;
+}
+
+static struct platform_driver s3c_ac97_driver = {
+	.probe  = s3c_ac97_probe,
+	.remove = s3c_ac97_remove,
+	.driver = {
+		.name = "samsung-ac97",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init s3c_ac97_init(void)
+{
+	return platform_driver_register(&s3c_ac97_driver);
+}
+module_init(s3c_ac97_init);
+
+static void __exit s3c_ac97_exit(void)
+{
+	platform_driver_unregister(&s3c_ac97_driver);
+}
+module_exit(s3c_ac97_exit);
+
+MODULE_AUTHOR("Jaswinder Singh, <jassi.brar@samsung.com>");
+MODULE_DESCRIPTION("AC97 driver for the Samsung SoC");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-ac97");
diff --git a/sound/soc/samsung/ac97.h b/sound/soc/samsung/ac97.h
new file mode 100644
index 0000000..0d0e1b5
--- /dev/null
+++ b/sound/soc/samsung/ac97.h
@@ -0,0 +1,21 @@
+/* sound/soc/samsung/ac97.h
+ *
+ * ALSA SoC Audio Layer - S3C AC97 Controller driver
+ *	Evolved from s3c2443-ac97.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *	Author: Jaswinder Singh <jassi.brar@samsung.com>
+ *	Credits: Graeme Gregory, Sean Choi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S3C_AC97_H_
+#define __S3C_AC97_H_
+
+#define S3C_AC97_DAI_PCM 0
+#define S3C_AC97_DAI_MIC 1
+
+#endif /* __S3C_AC97_H_ */
diff --git a/sound/soc/samsung/dma.c b/sound/soc/samsung/dma.c
new file mode 100644
index 0000000..12622f3
--- /dev/null
+++ b/sound/soc/samsung/dma.c
@@ -0,0 +1,503 @@
+/*
+ * dma.c  --  ALSA Soc Audio Layer
+ *
+ * (c) 2006 Wolfson Microelectronics PLC.
+ * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ * Copyright 2004-2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <asm/dma.h>
+#include <mach/hardware.h>
+#include <mach/dma.h>
+
+#include "dma.h"
+
+static const struct snd_pcm_hardware dma_hardware = {
+	.info			= SNDRV_PCM_INFO_INTERLEAVED |
+				    SNDRV_PCM_INFO_BLOCK_TRANSFER |
+				    SNDRV_PCM_INFO_MMAP |
+				    SNDRV_PCM_INFO_MMAP_VALID |
+				    SNDRV_PCM_INFO_PAUSE |
+				    SNDRV_PCM_INFO_RESUME,
+	.formats		= SNDRV_PCM_FMTBIT_S16_LE |
+				    SNDRV_PCM_FMTBIT_U16_LE |
+				    SNDRV_PCM_FMTBIT_U8 |
+				    SNDRV_PCM_FMTBIT_S8,
+	.channels_min		= 2,
+	.channels_max		= 2,
+	.buffer_bytes_max	= 128*1024,
+	.period_bytes_min	= PAGE_SIZE,
+	.period_bytes_max	= PAGE_SIZE*2,
+	.periods_min		= 2,
+	.periods_max		= 128,
+	.fifo_size		= 32,
+};
+
+struct runtime_data {
+	spinlock_t lock;
+	int state;
+	unsigned int dma_loaded;
+	unsigned int dma_limit;
+	unsigned int dma_period;
+	dma_addr_t dma_start;
+	dma_addr_t dma_pos;
+	dma_addr_t dma_end;
+	struct s3c_dma_params *params;
+};
+
+/* dma_enqueue
+ *
+ * place a dma buffer onto the queue for the dma system
+ * to handle.
+*/
+static void dma_enqueue(struct snd_pcm_substream *substream)
+{
+	struct runtime_data *prtd = substream->runtime->private_data;
+	dma_addr_t pos = prtd->dma_pos;
+	unsigned int limit;
+	int ret;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (s3c_dma_has_circular())
+		limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
+	else
+		limit = prtd->dma_limit;
+
+	pr_debug("%s: loaded %d, limit %d\n",
+				__func__, prtd->dma_loaded, limit);
+
+	while (prtd->dma_loaded < limit) {
+		unsigned long len = prtd->dma_period;
+
+		pr_debug("dma_loaded: %d\n", prtd->dma_loaded);
+
+		if ((pos + len) > prtd->dma_end) {
+			len  = prtd->dma_end - pos;
+			pr_debug(KERN_DEBUG "%s: corrected dma len %ld\n",
+			       __func__, len);
+		}
+
+		ret = s3c2410_dma_enqueue(prtd->params->channel,
+			substream, pos, len);
+
+		if (ret == 0) {
+			prtd->dma_loaded++;
+			pos += prtd->dma_period;
+			if (pos >= prtd->dma_end)
+				pos = prtd->dma_start;
+		} else
+			break;
+	}
+
+	prtd->dma_pos = pos;
+}
+
+static void audio_buffdone(struct s3c2410_dma_chan *channel,
+				void *dev_id, int size,
+				enum s3c2410_dma_buffresult result)
+{
+	struct snd_pcm_substream *substream = dev_id;
+	struct runtime_data *prtd;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (result == S3C2410_RES_ABORT || result == S3C2410_RES_ERR)
+		return;
+
+	prtd = substream->runtime->private_data;
+
+	if (substream)
+		snd_pcm_period_elapsed(substream);
+
+	spin_lock(&prtd->lock);
+	if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) {
+		prtd->dma_loaded--;
+		dma_enqueue(substream);
+	}
+
+	spin_unlock(&prtd->lock);
+}
+
+static int dma_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct runtime_data *prtd = runtime->private_data;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	unsigned long totbytes = params_buffer_bytes(params);
+	struct s3c_dma_params *dma =
+		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	int ret = 0;
+
+
+	pr_debug("Entered %s\n", __func__);
+
+	/* return if this is a bufferless transfer e.g.
+	 * codec <--> BT codec or GSM modem -- lg FIXME */
+	if (!dma)
+		return 0;
+
+	/* this may get called several times by oss emulation
+	 * with different params -HW */
+	if (prtd->params == NULL) {
+		/* prepare DMA */
+		prtd->params = dma;
+
+		pr_debug("params %p, client %p, channel %d\n", prtd->params,
+			prtd->params->client, prtd->params->channel);
+
+		ret = s3c2410_dma_request(prtd->params->channel,
+					  prtd->params->client, NULL);
+
+		if (ret < 0) {
+			printk(KERN_ERR "failed to get dma channel\n");
+			return ret;
+		}
+
+		/* use the circular buffering if we have it available. */
+		if (s3c_dma_has_circular())
+			s3c2410_dma_setflags(prtd->params->channel,
+					     S3C2410_DMAF_CIRCULAR);
+	}
+
+	s3c2410_dma_set_buffdone_fn(prtd->params->channel,
+				    audio_buffdone);
+
+	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+
+	runtime->dma_bytes = totbytes;
+
+	spin_lock_irq(&prtd->lock);
+	prtd->dma_loaded = 0;
+	prtd->dma_limit = runtime->hw.periods_min;
+	prtd->dma_period = params_period_bytes(params);
+	prtd->dma_start = runtime->dma_addr;
+	prtd->dma_pos = prtd->dma_start;
+	prtd->dma_end = prtd->dma_start + totbytes;
+	spin_unlock_irq(&prtd->lock);
+
+	return 0;
+}
+
+static int dma_hw_free(struct snd_pcm_substream *substream)
+{
+	struct runtime_data *prtd = substream->runtime->private_data;
+
+	pr_debug("Entered %s\n", __func__);
+
+	/* TODO - do we need to ensure DMA flushed */
+	snd_pcm_set_runtime_buffer(substream, NULL);
+
+	if (prtd->params) {
+		s3c2410_dma_free(prtd->params->channel, prtd->params->client);
+		prtd->params = NULL;
+	}
+
+	return 0;
+}
+
+static int dma_prepare(struct snd_pcm_substream *substream)
+{
+	struct runtime_data *prtd = substream->runtime->private_data;
+	int ret = 0;
+
+	pr_debug("Entered %s\n", __func__);
+
+	/* return if this is a bufferless transfer e.g.
+	 * codec <--> BT codec or GSM modem -- lg FIXME */
+	if (!prtd->params)
+		return 0;
+
+	/* channel needs configuring for mem=>device, increment memory addr,
+	 * sync to pclk, half-word transfers to the IIS-FIFO. */
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		s3c2410_dma_devconfig(prtd->params->channel,
+				      S3C2410_DMASRC_MEM,
+				      prtd->params->dma_addr);
+	} else {
+		s3c2410_dma_devconfig(prtd->params->channel,
+				      S3C2410_DMASRC_HW,
+				      prtd->params->dma_addr);
+	}
+
+	s3c2410_dma_config(prtd->params->channel,
+			   prtd->params->dma_size);
+
+	/* flush the DMA channel */
+	s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
+	prtd->dma_loaded = 0;
+	prtd->dma_pos = prtd->dma_start;
+
+	/* enqueue dma buffers */
+	dma_enqueue(substream);
+
+	return ret;
+}
+
+static int dma_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct runtime_data *prtd = substream->runtime->private_data;
+	int ret = 0;
+
+	pr_debug("Entered %s\n", __func__);
+
+	spin_lock(&prtd->lock);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		prtd->state |= ST_RUNNING;
+		s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_START);
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		prtd->state &= ~ST_RUNNING;
+		s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STOP);
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock(&prtd->lock);
+
+	return ret;
+}
+
+static snd_pcm_uframes_t
+dma_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct runtime_data *prtd = runtime->private_data;
+	unsigned long res;
+	dma_addr_t src, dst;
+
+	pr_debug("Entered %s\n", __func__);
+
+	spin_lock(&prtd->lock);
+	s3c2410_dma_getposition(prtd->params->channel, &src, &dst);
+
+	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+		res = dst - prtd->dma_start;
+	else
+		res = src - prtd->dma_start;
+
+	spin_unlock(&prtd->lock);
+
+	pr_debug("Pointer %x %x\n", src, dst);
+
+	/* we seem to be getting the odd error from the pcm library due
+	 * to out-of-bounds pointers. this is maybe due to the dma engine
+	 * not having loaded the new values for the channel before being
+	 * callled... (todo - fix )
+	 */
+
+	if (res >= snd_pcm_lib_buffer_bytes(substream)) {
+		if (res == snd_pcm_lib_buffer_bytes(substream))
+			res = 0;
+	}
+
+	return bytes_to_frames(substream->runtime, res);
+}
+
+static int dma_open(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct runtime_data *prtd;
+
+	pr_debug("Entered %s\n", __func__);
+
+	snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
+	snd_soc_set_runtime_hwparams(substream, &dma_hardware);
+
+	prtd = kzalloc(sizeof(struct runtime_data), GFP_KERNEL);
+	if (prtd == NULL)
+		return -ENOMEM;
+
+	spin_lock_init(&prtd->lock);
+
+	runtime->private_data = prtd;
+	return 0;
+}
+
+static int dma_close(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct runtime_data *prtd = runtime->private_data;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (!prtd)
+		pr_debug("dma_close called with prtd == NULL\n");
+
+	kfree(prtd);
+
+	return 0;
+}
+
+static int dma_mmap(struct snd_pcm_substream *substream,
+	struct vm_area_struct *vma)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	pr_debug("Entered %s\n", __func__);
+
+	return dma_mmap_writecombine(substream->pcm->card->dev, vma,
+				     runtime->dma_area,
+				     runtime->dma_addr,
+				     runtime->dma_bytes);
+}
+
+static struct snd_pcm_ops dma_ops = {
+	.open		= dma_open,
+	.close		= dma_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= dma_hw_params,
+	.hw_free	= dma_hw_free,
+	.prepare	= dma_prepare,
+	.trigger	= dma_trigger,
+	.pointer	= dma_pointer,
+	.mmap		= dma_mmap,
+};
+
+static int preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+{
+	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+	struct snd_dma_buffer *buf = &substream->dma_buffer;
+	size_t size = dma_hardware.buffer_bytes_max;
+
+	pr_debug("Entered %s\n", __func__);
+
+	buf->dev.type = SNDRV_DMA_TYPE_DEV;
+	buf->dev.dev = pcm->card->dev;
+	buf->private_data = NULL;
+	buf->area = dma_alloc_writecombine(pcm->card->dev, size,
+					   &buf->addr, GFP_KERNEL);
+	if (!buf->area)
+		return -ENOMEM;
+	buf->bytes = size;
+	return 0;
+}
+
+static void dma_free_dma_buffers(struct snd_pcm *pcm)
+{
+	struct snd_pcm_substream *substream;
+	struct snd_dma_buffer *buf;
+	int stream;
+
+	pr_debug("Entered %s\n", __func__);
+
+	for (stream = 0; stream < 2; stream++) {
+		substream = pcm->streams[stream].substream;
+		if (!substream)
+			continue;
+
+		buf = &substream->dma_buffer;
+		if (!buf->area)
+			continue;
+
+		dma_free_writecombine(pcm->card->dev, buf->bytes,
+				      buf->area, buf->addr);
+		buf->area = NULL;
+	}
+}
+
+static u64 dma_mask = DMA_BIT_MASK(32);
+
+static int dma_new(struct snd_card *card,
+	struct snd_soc_dai *dai, struct snd_pcm *pcm)
+{
+	int ret = 0;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (!card->dev->dma_mask)
+		card->dev->dma_mask = &dma_mask;
+	if (!card->dev->coherent_dma_mask)
+		card->dev->coherent_dma_mask = 0xffffffff;
+
+	if (dai->driver->playback.channels_min) {
+		ret = preallocate_dma_buffer(pcm,
+			SNDRV_PCM_STREAM_PLAYBACK);
+		if (ret)
+			goto out;
+	}
+
+	if (dai->driver->capture.channels_min) {
+		ret = preallocate_dma_buffer(pcm,
+			SNDRV_PCM_STREAM_CAPTURE);
+		if (ret)
+			goto out;
+	}
+out:
+	return ret;
+}
+
+static struct snd_soc_platform_driver samsung_asoc_platform = {
+	.ops		= &dma_ops,
+	.pcm_new	= dma_new,
+	.pcm_free	= dma_free_dma_buffers,
+};
+
+static int __devinit samsung_asoc_platform_probe(struct platform_device *pdev)
+{
+	return snd_soc_register_platform(&pdev->dev, &samsung_asoc_platform);
+}
+
+static int __devexit samsung_asoc_platform_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_platform(&pdev->dev);
+	return 0;
+}
+
+static struct platform_driver asoc_dma_driver = {
+	.driver = {
+		.name = "samsung-audio",
+		.owner = THIS_MODULE,
+	},
+
+	.probe = samsung_asoc_platform_probe,
+	.remove = __devexit_p(samsung_asoc_platform_remove),
+};
+
+static int __init samsung_asoc_init(void)
+{
+	return platform_driver_register(&asoc_dma_driver);
+}
+module_init(samsung_asoc_init);
+
+static void __exit samsung_asoc_exit(void)
+{
+	platform_driver_unregister(&asoc_dma_driver);
+}
+module_exit(samsung_asoc_exit);
+
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("Samsung ASoC DMA Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-audio");
diff --git a/sound/soc/samsung/dma.h b/sound/soc/samsung/dma.h
new file mode 100644
index 0000000..f8cd2b4
--- /dev/null
+++ b/sound/soc/samsung/dma.h
@@ -0,0 +1,30 @@
+/*
+ *  dma.h --
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  ALSA PCM interface for the Samsung S3C24xx CPU
+ */
+
+#ifndef _S3C_AUDIO_H
+#define _S3C_AUDIO_H
+
+#define ST_RUNNING		(1<<0)
+#define ST_OPENED		(1<<1)
+
+struct s3c_dma_params {
+	struct s3c2410_dma_client *client;	/* stream identifier */
+	int channel;				/* Channel ID */
+	dma_addr_t dma_addr;
+	int dma_size;			/* Size of the DMA transfer */
+};
+
+#define S3C24XX_DAI_I2S			0
+
+/* platform data */
+extern struct snd_ac97_bus_ops s3c24xx_ac97_ops;
+
+#endif
diff --git a/sound/soc/samsung/goni_wm8994.c b/sound/soc/samsung/goni_wm8994.c
new file mode 100644
index 0000000..dcaf7c3
--- /dev/null
+++ b/sound/soc/samsung/goni_wm8994.c
@@ -0,0 +1,309 @@
+/*
+ * goni_wm8994.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/jack.h>
+#include <asm/mach-types.h>
+#include <mach/gpio.h>
+#include <mach/regs-clock.h>
+
+#include <linux/mfd/wm8994/core.h>
+#include <linux/mfd/wm8994/registers.h>
+#include "../codecs/wm8994.h"
+#include "dma.h"
+#include "i2s.h"
+
+#define MACHINE_NAME	0
+#define CPU_VOICE_DAI	1
+
+static const char *aquila_str[] = {
+	[MACHINE_NAME] = "aquila",
+	[CPU_VOICE_DAI] = "aquila-voice-dai",
+};
+
+static struct snd_soc_card goni;
+static struct platform_device *goni_snd_device;
+
+/* 3.5 pie jack */
+static struct snd_soc_jack jack;
+
+/* 3.5 pie jack detection DAPM pins */
+static struct snd_soc_jack_pin jack_pins[] = {
+	{
+		.pin = "Headset Mic",
+		.mask = SND_JACK_MICROPHONE,
+	}, {
+		.pin = "Headset Stereophone",
+		.mask = SND_JACK_HEADPHONE | SND_JACK_MECHANICAL |
+			SND_JACK_AVOUT,
+	},
+};
+
+/* 3.5 pie jack detection gpios */
+static struct snd_soc_jack_gpio jack_gpios[] = {
+	{
+		.gpio = S5PV210_GPH0(6),
+		.name = "DET_3.5",
+		.report = SND_JACK_HEADSET | SND_JACK_MECHANICAL |
+			SND_JACK_AVOUT,
+		.debounce_time = 200,
+	},
+};
+
+static const struct snd_soc_dapm_widget goni_dapm_widgets[] = {
+	SND_SOC_DAPM_SPK("Ext Left Spk", NULL),
+	SND_SOC_DAPM_SPK("Ext Right Spk", NULL),
+	SND_SOC_DAPM_SPK("Ext Rcv", NULL),
+	SND_SOC_DAPM_HP("Headset Stereophone", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_MIC("Main Mic", NULL),
+	SND_SOC_DAPM_MIC("2nd Mic", NULL),
+	SND_SOC_DAPM_LINE("Radio In", NULL),
+};
+
+static const struct snd_soc_dapm_route goni_dapm_routes[] = {
+	{"Ext Left Spk", NULL, "SPKOUTLP"},
+	{"Ext Left Spk", NULL, "SPKOUTLN"},
+
+	{"Ext Right Spk", NULL, "SPKOUTRP"},
+	{"Ext Right Spk", NULL, "SPKOUTRN"},
+
+	{"Ext Rcv", NULL, "HPOUT2N"},
+	{"Ext Rcv", NULL, "HPOUT2P"},
+
+	{"Headset Stereophone", NULL, "HPOUT1L"},
+	{"Headset Stereophone", NULL, "HPOUT1R"},
+
+	{"IN1RN", NULL, "Headset Mic"},
+	{"IN1RP", NULL, "Headset Mic"},
+
+	{"IN1RN", NULL, "2nd Mic"},
+	{"IN1RP", NULL, "2nd Mic"},
+
+	{"IN1LN", NULL, "Main Mic"},
+	{"IN1LP", NULL, "Main Mic"},
+
+	{"IN2LN", NULL, "Radio In"},
+	{"IN2RN", NULL, "Radio In"},
+};
+
+static int goni_wm8994_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	int ret;
+
+	/* add goni specific widgets */
+	snd_soc_dapm_new_controls(codec, goni_dapm_widgets,
+			ARRAY_SIZE(goni_dapm_widgets));
+
+	/* set up goni specific audio routes */
+	snd_soc_dapm_add_routes(codec, goni_dapm_routes,
+			ARRAY_SIZE(goni_dapm_routes));
+
+	/* set endpoints to not connected */
+	snd_soc_dapm_nc_pin(codec, "IN2LP:VXRN");
+	snd_soc_dapm_nc_pin(codec, "IN2RP:VXRP");
+	snd_soc_dapm_nc_pin(codec, "LINEOUT1N");
+	snd_soc_dapm_nc_pin(codec, "LINEOUT1P");
+	snd_soc_dapm_nc_pin(codec, "LINEOUT2N");
+	snd_soc_dapm_nc_pin(codec, "LINEOUT2P");
+
+	if (machine_is_aquila()) {
+		snd_soc_dapm_nc_pin(codec, "SPKOUTRN");
+		snd_soc_dapm_nc_pin(codec, "SPKOUTRP");
+	}
+
+	snd_soc_dapm_sync(codec);
+
+	/* Headset jack detection */
+	ret = snd_soc_jack_new(&goni, "Headset Jack",
+			SND_JACK_HEADSET | SND_JACK_MECHANICAL | SND_JACK_AVOUT,
+			&jack);
+	if (ret)
+		return ret;
+
+	ret = snd_soc_jack_add_pins(&jack, ARRAY_SIZE(jack_pins), jack_pins);
+	if (ret)
+		return ret;
+
+	ret = snd_soc_jack_add_gpios(&jack, ARRAY_SIZE(jack_gpios), jack_gpios);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int goni_hifi_hw_params(struct snd_pcm_substream *substream,
+		struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	unsigned int pll_out = 24000000;
+	int ret = 0;
+
+	/* set the cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+			SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+			SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec FLL */
+	ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL1, 0, pll_out,
+			params_rate(params) * 256);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL1,
+			params_rate(params) * 256, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct snd_soc_ops goni_hifi_ops = {
+	.hw_params = goni_hifi_hw_params,
+};
+
+static int goni_voice_hw_params(struct snd_pcm_substream *substream,
+		struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	unsigned int pll_out = 24000000;
+	int ret = 0;
+
+	if (params_rate(params) != 8000)
+		return -EINVAL;
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_LEFT_J |
+			SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec FLL */
+	ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL2, 0, pll_out,
+			params_rate(params) * 256);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL2,
+			params_rate(params) * 256, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct snd_soc_dai_driver voice_dai = {
+	.name = "goni-voice-dai",
+	.id = 0,
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+};
+
+static struct snd_soc_ops goni_voice_ops = {
+	.hw_params = goni_voice_hw_params,
+};
+
+static struct snd_soc_dai_link goni_dai[] = {
+{
+	.name = "WM8994",
+	.stream_name = "WM8994 HiFi",
+	.cpu_dai_name = "samsung-i2s.0",
+	.codec_dai_name = "wm8994-hifi",
+	.platform_name = "samsung-audio",
+	.codec_name = "wm8994-codec.0-0x1a",
+	.init = goni_wm8994_init,
+	.ops = &goni_hifi_ops,
+}, {
+	.name = "WM8994 Voice",
+	.stream_name = "Voice",
+	.cpu_dai_name = "goni-voice-dai",
+	.codec_dai_name = "wm8994-voice",
+	.platform_name = "samsung-audio",
+	.codec_name = "wm8994-codec.0-0x1a",
+	.ops = &goni_voice_ops,
+},
+};
+
+static struct snd_soc_card goni = {
+	.name = "goni",
+	.dai_link = goni_dai,
+	.num_links = ARRAY_SIZE(goni_dai),
+};
+
+static int __init goni_init(void)
+{
+	int ret;
+
+	if (machine_is_aquila()) {
+		voice_dai.name = aquila_str[CPU_VOICE_DAI];
+		goni_dai[1].cpu_dai_name = aquila_str[CPU_VOICE_DAI];
+		goni.name = aquila_str[MACHINE_NAME];
+	} else if (!machine_is_goni())
+		return -ENODEV;
+
+	goni_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!goni_snd_device)
+		return -ENOMEM;
+
+	/* register voice DAI here */
+	ret = snd_soc_register_dai(&goni_snd_device->dev, &voice_dai);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(goni_snd_device, &goni);
+	ret = platform_device_add(goni_snd_device);
+
+	if (ret)
+		platform_device_put(goni_snd_device);
+
+	return ret;
+}
+
+static void __exit goni_exit(void)
+{
+	platform_device_unregister(goni_snd_device);
+}
+
+module_init(goni_init);
+module_exit(goni_exit);
+
+/* Module information */
+MODULE_DESCRIPTION("ALSA SoC WM8994 GONI(S5PV210)");
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
new file mode 100644
index 0000000..d5d8975
--- /dev/null
+++ b/sound/soc/samsung/i2s.c
@@ -0,0 +1,1251 @@
+/* sound/soc/samsung/i2s.c
+ *
+ * ALSA SoC Audio Layer - Samsung I2S Controller driver
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <plat/audio.h>
+
+#include "dma.h"
+#include "i2s.h"
+
+#define I2SCON		0x0
+#define I2SMOD		0x4
+#define I2SFIC		0x8
+#define I2SPSR		0xc
+#define I2STXD		0x10
+#define I2SRXD		0x14
+#define I2SFICS		0x18
+#define I2STXDS		0x1c
+
+#define CON_RSTCLR		(1 << 31)
+#define CON_FRXOFSTATUS		(1 << 26)
+#define CON_FRXORINTEN		(1 << 25)
+#define CON_FTXSURSTAT		(1 << 24)
+#define CON_FTXSURINTEN		(1 << 23)
+#define CON_TXSDMA_PAUSE	(1 << 20)
+#define CON_TXSDMA_ACTIVE	(1 << 18)
+
+#define CON_FTXURSTATUS		(1 << 17)
+#define CON_FTXURINTEN		(1 << 16)
+#define CON_TXFIFO2_EMPTY	(1 << 15)
+#define CON_TXFIFO1_EMPTY	(1 << 14)
+#define CON_TXFIFO2_FULL	(1 << 13)
+#define CON_TXFIFO1_FULL	(1 << 12)
+
+#define CON_LRINDEX		(1 << 11)
+#define CON_TXFIFO_EMPTY	(1 << 10)
+#define CON_RXFIFO_EMPTY	(1 << 9)
+#define CON_TXFIFO_FULL		(1 << 8)
+#define CON_RXFIFO_FULL		(1 << 7)
+#define CON_TXDMA_PAUSE		(1 << 6)
+#define CON_RXDMA_PAUSE		(1 << 5)
+#define CON_TXCH_PAUSE		(1 << 4)
+#define CON_RXCH_PAUSE		(1 << 3)
+#define CON_TXDMA_ACTIVE	(1 << 2)
+#define CON_RXDMA_ACTIVE	(1 << 1)
+#define CON_ACTIVE		(1 << 0)
+
+#define MOD_OPCLK_CDCLK_OUT	(0 << 30)
+#define MOD_OPCLK_CDCLK_IN	(1 << 30)
+#define MOD_OPCLK_BCLK_OUT	(2 << 30)
+#define MOD_OPCLK_PCLK		(3 << 30)
+#define MOD_OPCLK_MASK		(3 << 30)
+#define MOD_TXS_IDMA		(1 << 28) /* Sec_TXFIFO use I-DMA */
+
+#define MOD_BLCS_SHIFT	26
+#define MOD_BLCS_16BIT	(0 << MOD_BLCS_SHIFT)
+#define MOD_BLCS_8BIT	(1 << MOD_BLCS_SHIFT)
+#define MOD_BLCS_24BIT	(2 << MOD_BLCS_SHIFT)
+#define MOD_BLCS_MASK	(3 << MOD_BLCS_SHIFT)
+#define MOD_BLCP_SHIFT	24
+#define MOD_BLCP_16BIT	(0 << MOD_BLCP_SHIFT)
+#define MOD_BLCP_8BIT	(1 << MOD_BLCP_SHIFT)
+#define MOD_BLCP_24BIT	(2 << MOD_BLCP_SHIFT)
+#define MOD_BLCP_MASK	(3 << MOD_BLCP_SHIFT)
+
+#define MOD_C2DD_HHALF		(1 << 21) /* Discard Higher-half */
+#define MOD_C2DD_LHALF		(1 << 20) /* Discard Lower-half */
+#define MOD_C1DD_HHALF		(1 << 19)
+#define MOD_C1DD_LHALF		(1 << 18)
+#define MOD_DC2_EN		(1 << 17)
+#define MOD_DC1_EN		(1 << 16)
+#define MOD_BLC_16BIT		(0 << 13)
+#define MOD_BLC_8BIT		(1 << 13)
+#define MOD_BLC_24BIT		(2 << 13)
+#define MOD_BLC_MASK		(3 << 13)
+
+#define MOD_IMS_SYSMUX		(1 << 10)
+#define MOD_SLAVE		(1 << 11)
+#define MOD_TXONLY		(0 << 8)
+#define MOD_RXONLY		(1 << 8)
+#define MOD_TXRX		(2 << 8)
+#define MOD_MASK		(3 << 8)
+#define MOD_LR_LLOW		(0 << 7)
+#define MOD_LR_RLOW		(1 << 7)
+#define MOD_SDF_IIS		(0 << 5)
+#define MOD_SDF_MSB		(1 << 5)
+#define MOD_SDF_LSB		(2 << 5)
+#define MOD_SDF_MASK		(3 << 5)
+#define MOD_RCLK_256FS		(0 << 3)
+#define MOD_RCLK_512FS		(1 << 3)
+#define MOD_RCLK_384FS		(2 << 3)
+#define MOD_RCLK_768FS		(3 << 3)
+#define MOD_RCLK_MASK		(3 << 3)
+#define MOD_BCLK_32FS		(0 << 1)
+#define MOD_BCLK_48FS		(1 << 1)
+#define MOD_BCLK_16FS		(2 << 1)
+#define MOD_BCLK_24FS		(3 << 1)
+#define MOD_BCLK_MASK		(3 << 1)
+#define MOD_8BIT		(1 << 0)
+
+#define MOD_CDCLKCON		(1 << 12)
+
+#define PSR_PSREN		(1 << 15)
+
+#define FIC_TX2COUNT(x)		(((x) >>  24) & 0xf)
+#define FIC_TX1COUNT(x)		(((x) >>  16) & 0xf)
+
+#define FIC_TXFLUSH		(1 << 15)
+#define FIC_RXFLUSH		(1 << 7)
+#define FIC_TXCOUNT(x)		(((x) >>  8) & 0xf)
+#define FIC_RXCOUNT(x)		(((x) >>  0) & 0xf)
+#define FICS_TXCOUNT(x)		(((x) >>  8) & 0x7f)
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+struct i2s_dai {
+	/* Platform device for this DAI */
+	struct platform_device *pdev;
+	/* IOREMAP'd SFRs */
+	void __iomem	*addr;
+	/* Physical base address of SFRs */
+	u32	base;
+	/* Rate of RCLK source clock */
+	unsigned long rclk_srcrate;
+	/* Frame Clock */
+	unsigned frmclk;
+	/*
+	 * Specifically requested RCLK,BCLK by MACHINE Driver.
+	 * 0 indicates CPU driver is free to choose any value.
+	 */
+	unsigned rfs, bfs;
+	/* I2S Controller's core clock */
+	struct clk *clk;
+	/* Clock for generating I2S signals */
+	struct clk *op_clk;
+	/* Array of clock names for op_clk */
+	const char **src_clk;
+	/* Pointer to the Primary_Fifo if this is Sec_Fifo, NULL otherwise */
+	struct i2s_dai *pri_dai;
+	/* Pointer to the Secondary_Fifo if it has one, NULL otherwise */
+	struct i2s_dai *sec_dai;
+#define DAI_OPENED	(1 << 0) /* Dai is opened */
+#define DAI_MANAGER	(1 << 1) /* Dai is the manager */
+	unsigned mode;
+	/* Driver for this DAI */
+	struct snd_soc_dai_driver s3c_i2s_drv;
+	/* DMA parameters */
+	struct s3c_dma_params dma_playback;
+	struct s3c_dma_params dma_capture;
+	u32	quirks;
+	u32	suspend_i2smod;
+	u32	suspend_i2scon;
+	u32	suspend_i2spsr;
+};
+
+/* Lock for cross i/f checks */
+static DEFINE_SPINLOCK(lock);
+
+/* If this is the 'overlay' stereo DAI */
+static inline bool is_secondary(struct i2s_dai *i2s)
+{
+	return i2s->pri_dai ? true : false;
+}
+
+/* If operating in SoC-Slave mode */
+static inline bool is_slave(struct i2s_dai *i2s)
+{
+	return (readl(i2s->addr + I2SMOD) & MOD_SLAVE) ? true : false;
+}
+
+/* If this interface of the controller is transmitting data */
+static inline bool tx_active(struct i2s_dai *i2s)
+{
+	u32 active;
+
+	if (!i2s)
+		return false;
+
+	active = readl(i2s->addr + I2SMOD);
+
+	if (is_secondary(i2s))
+		active &= CON_TXSDMA_ACTIVE;
+	else
+		active &= CON_TXDMA_ACTIVE;
+
+	return active ? true : false;
+}
+
+/* If the other interface of the controller is transmitting data */
+static inline bool other_tx_active(struct i2s_dai *i2s)
+{
+	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
+
+	return tx_active(other);
+}
+
+/* If any interface of the controller is transmitting data */
+static inline bool any_tx_active(struct i2s_dai *i2s)
+{
+	return tx_active(i2s) || other_tx_active(i2s);
+}
+
+/* If this interface of the controller is receiving data */
+static inline bool rx_active(struct i2s_dai *i2s)
+{
+	u32 active;
+
+	if (!i2s)
+		return false;
+
+	active = readl(i2s->addr + I2SMOD) & CON_RXDMA_ACTIVE;
+
+	return active ? true : false;
+}
+
+/* If the other interface of the controller is receiving data */
+static inline bool other_rx_active(struct i2s_dai *i2s)
+{
+	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
+
+	return rx_active(other);
+}
+
+/* If any interface of the controller is receiving data */
+static inline bool any_rx_active(struct i2s_dai *i2s)
+{
+	return rx_active(i2s) || other_rx_active(i2s);
+}
+
+/* If the other DAI is transmitting or receiving data */
+static inline bool other_active(struct i2s_dai *i2s)
+{
+	return other_rx_active(i2s) || other_tx_active(i2s);
+}
+
+/* If this DAI is transmitting or receiving data */
+static inline bool this_active(struct i2s_dai *i2s)
+{
+	return tx_active(i2s) || rx_active(i2s);
+}
+
+/* If the controller is active anyway */
+static inline bool any_active(struct i2s_dai *i2s)
+{
+	return this_active(i2s) || other_active(i2s);
+}
+
+static inline struct i2s_dai *to_info(struct snd_soc_dai *dai)
+{
+	return snd_soc_dai_get_drvdata(dai);
+}
+
+static inline bool is_opened(struct i2s_dai *i2s)
+{
+	if (i2s && (i2s->mode & DAI_OPENED))
+		return true;
+	else
+		return false;
+}
+
+static inline bool is_manager(struct i2s_dai *i2s)
+{
+	if (is_opened(i2s) && (i2s->mode & DAI_MANAGER))
+		return true;
+	else
+		return false;
+}
+
+/* Read RCLK of I2S (in multiples of LRCLK) */
+static inline unsigned get_rfs(struct i2s_dai *i2s)
+{
+	u32 rfs = (readl(i2s->addr + I2SMOD) >> 3) & 0x3;
+
+	switch (rfs) {
+	case 3:	return 768;
+	case 2: return 384;
+	case 1:	return 512;
+	default: return 256;
+	}
+}
+
+/* Write RCLK of I2S (in multiples of LRCLK) */
+static inline void set_rfs(struct i2s_dai *i2s, unsigned rfs)
+{
+	u32 mod = readl(i2s->addr + I2SMOD);
+
+	mod &= ~MOD_RCLK_MASK;
+
+	switch (rfs) {
+	case 768:
+		mod |= MOD_RCLK_768FS;
+		break;
+	case 512:
+		mod |= MOD_RCLK_512FS;
+		break;
+	case 384:
+		mod |= MOD_RCLK_384FS;
+		break;
+	default:
+		mod |= MOD_RCLK_256FS;
+		break;
+	}
+
+	writel(mod, i2s->addr + I2SMOD);
+}
+
+/* Read Bit-Clock of I2S (in multiples of LRCLK) */
+static inline unsigned get_bfs(struct i2s_dai *i2s)
+{
+	u32 bfs = (readl(i2s->addr + I2SMOD) >> 1) & 0x3;
+
+	switch (bfs) {
+	case 3: return 24;
+	case 2: return 16;
+	case 1:	return 48;
+	default: return 32;
+	}
+}
+
+/* Write Bit-Clock of I2S (in multiples of LRCLK) */
+static inline void set_bfs(struct i2s_dai *i2s, unsigned bfs)
+{
+	u32 mod = readl(i2s->addr + I2SMOD);
+
+	mod &= ~MOD_BCLK_MASK;
+
+	switch (bfs) {
+	case 48:
+		mod |= MOD_BCLK_48FS;
+		break;
+	case 32:
+		mod |= MOD_BCLK_32FS;
+		break;
+	case 24:
+		mod |= MOD_BCLK_24FS;
+		break;
+	default:
+		mod |= MOD_BCLK_16FS;
+		break;
+	}
+
+	writel(mod, i2s->addr + I2SMOD);
+}
+
+/* Sample-Size */
+static inline int get_blc(struct i2s_dai *i2s)
+{
+	int blc = readl(i2s->addr + I2SMOD);
+
+	blc = (blc >> 13) & 0x3;
+
+	switch (blc) {
+	case 2: return 24;
+	case 1:	return 8;
+	default: return 16;
+	}
+}
+
+/* TX Channel Control */
+static void s3c_i2sv2_txctrl(struct i2s_dai *i2s, int on)
+{
+	void __iomem *addr = i2s->addr;
+	u32 con = readl(addr + I2SCON);
+	u32 mod = readl(addr + I2SMOD) & ~MOD_MASK;
+
+	if (on) {
+		con |= CON_ACTIVE;
+		con &= ~CON_TXCH_PAUSE;
+
+		if (is_secondary(i2s)) {
+			con |= CON_TXSDMA_ACTIVE;
+			con &= ~CON_TXSDMA_PAUSE;
+		} else {
+			con |= CON_TXDMA_ACTIVE;
+			con &= ~CON_TXDMA_PAUSE;
+		}
+
+		if (any_rx_active(i2s))
+			mod |= MOD_TXRX;
+		else
+			mod |= MOD_TXONLY;
+	} else {
+		if (is_secondary(i2s)) {
+			con |=  CON_TXSDMA_PAUSE;
+			con &= ~CON_TXSDMA_ACTIVE;
+		} else {
+			con |=  CON_TXDMA_PAUSE;
+			con &= ~CON_TXDMA_ACTIVE;
+		}
+
+		if (other_tx_active(i2s)) {
+			writel(con, addr + I2SCON);
+			return;
+		}
+
+		con |=  CON_TXCH_PAUSE;
+
+		if (any_rx_active(i2s))
+			mod |= MOD_RXONLY;
+		else
+			con &= ~CON_ACTIVE;
+	}
+
+	writel(mod, addr + I2SMOD);
+	writel(con, addr + I2SCON);
+}
+
+/* RX Channel Control */
+static void s3c_i2sv2_rxctrl(struct i2s_dai *i2s, int on)
+{
+	void __iomem *addr = i2s->addr;
+	u32 con = readl(addr + I2SCON);
+	u32 mod = readl(addr + I2SMOD) & ~MOD_MASK;
+
+	if (on) {
+		con |= CON_RXDMA_ACTIVE | CON_ACTIVE;
+		con &= ~(CON_RXDMA_PAUSE | CON_RXCH_PAUSE);
+
+		if (any_tx_active(i2s))
+			mod |= MOD_TXRX;
+		else
+			mod |= MOD_RXONLY;
+	} else {
+		con |=  CON_RXDMA_PAUSE | CON_RXCH_PAUSE;
+		con &= ~CON_RXDMA_ACTIVE;
+
+		if (any_tx_active(i2s))
+			mod |= MOD_TXONLY;
+		else
+			con &= ~CON_ACTIVE;
+	}
+
+	writel(mod, addr + I2SMOD);
+	writel(con, addr + I2SCON);
+}
+
+/* Flush FIFO of an interface */
+static inline void s3c_i2sv2_fifo(struct i2s_dai *i2s, u32 flush)
+{
+	void __iomem *fic;
+	u32 val;
+
+	if (!i2s)
+		return;
+
+	if (is_secondary(i2s))
+		fic = i2s->addr + I2SFICS;
+	else
+		fic = i2s->addr + I2SFIC;
+
+	/* Flush the FIFO */
+	writel(readl(fic) | flush, fic);
+
+	/* Be patient */
+	val = msecs_to_loops(1) / 1000; /* 1 usec */
+	while (--val)
+		cpu_relax();
+
+	writel(readl(fic) & ~flush, fic);
+}
+
+static int s3c_i2sv2_set_sysclk(struct snd_soc_dai *dai,
+	  int clk_id, unsigned int rfs, int dir)
+{
+	struct i2s_dai *i2s = to_info(dai);
+	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
+	u32 mod = readl(i2s->addr + I2SMOD);
+
+	switch (clk_id) {
+	case SAMSUNG_I2S_CDCLK:
+		/* Shouldn't matter in GATING(CLOCK_IN) mode */
+		if (dir == SND_SOC_CLOCK_IN)
+			rfs = 0;
+
+		if ((rfs && other->rfs && (other->rfs != rfs)) ||
+				(any_active(i2s) &&
+				(((dir == SND_SOC_CLOCK_IN)
+					&& !(mod & MOD_CDCLKCON)) ||
+				((dir == SND_SOC_CLOCK_OUT)
+					&& (mod & MOD_CDCLKCON))))) {
+			dev_err(&i2s->pdev->dev,
+				"%s:%d Other DAI busy\n", __func__, __LINE__);
+			return -EAGAIN;
+		}
+
+		if (dir == SND_SOC_CLOCK_IN)
+			mod |= MOD_CDCLKCON;
+		else
+			mod &= ~MOD_CDCLKCON;
+
+		i2s->rfs = rfs;
+		break;
+
+	case SAMSUNG_I2S_RCLKSRC_0: /* clock corrsponding to IISMOD[10] := 0 */
+	case SAMSUNG_I2S_RCLKSRC_1: /* clock corrsponding to IISMOD[10] := 1 */
+		if ((i2s->quirks & QUIRK_NO_MUXPSR)
+				|| (clk_id == SAMSUNG_I2S_RCLKSRC_0))
+			clk_id = 0;
+		else
+			clk_id = 1;
+
+		if (!any_active(i2s)) {
+			if (i2s->op_clk) {
+				if ((clk_id && !(mod & MOD_IMS_SYSMUX)) ||
+					(!clk_id && (mod & MOD_IMS_SYSMUX))) {
+					clk_disable(i2s->op_clk);
+					clk_put(i2s->op_clk);
+				} else {
+					return 0;
+				}
+			}
+
+			i2s->op_clk = clk_get(&i2s->pdev->dev,
+						i2s->src_clk[clk_id]);
+			clk_enable(i2s->op_clk);
+			i2s->rclk_srcrate = clk_get_rate(i2s->op_clk);
+
+			/* Over-ride the other's */
+			if (other) {
+				other->op_clk = i2s->op_clk;
+				other->rclk_srcrate = i2s->rclk_srcrate;
+			}
+		} else if ((!clk_id && (mod & MOD_IMS_SYSMUX))
+				|| (clk_id && !(mod & MOD_IMS_SYSMUX))) {
+			dev_err(&i2s->pdev->dev,
+				"%s:%d Other DAI busy\n", __func__, __LINE__);
+			return -EAGAIN;
+		} else {
+			/* Call can't be on the active DAI */
+			i2s->op_clk = other->op_clk;
+			i2s->rclk_srcrate = other->rclk_srcrate;
+			return 0;
+		}
+
+		if (clk_id == 0)
+			mod &= ~MOD_IMS_SYSMUX;
+		else
+			mod |= MOD_IMS_SYSMUX;
+		break;
+
+	default:
+		dev_err(&i2s->pdev->dev, "We don't serve that!\n");
+		return -EINVAL;
+	}
+
+	writel(mod, i2s->addr + I2SMOD);
+
+	return 0;
+}
+
+static int i2sv2_i2s_set_fmt(struct snd_soc_dai *dai,
+	unsigned int fmt)
+{
+	struct i2s_dai *i2s = to_info(dai);
+	u32 mod = readl(i2s->addr + I2SMOD);
+	u32 tmp = 0;
+
+	/* Format is priority */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_RIGHT_J:
+		tmp |= MOD_LR_RLOW;
+		tmp |= MOD_SDF_MSB;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		tmp |= MOD_LR_RLOW;
+		tmp |= MOD_SDF_LSB;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		tmp |= MOD_SDF_IIS;
+		break;
+	default:
+		dev_err(&i2s->pdev->dev, "Format not supported\n");
+		return -EINVAL;
+	}
+
+	/* Allow LRCLK-inverted version of the supported formats */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		if (tmp & MOD_LR_RLOW)
+			tmp &= ~MOD_LR_RLOW;
+		else
+			tmp |= MOD_LR_RLOW;
+		break;
+	default:
+		dev_err(&i2s->pdev->dev, "Polarity not supported\n");
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		tmp |= MOD_SLAVE;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		/* Set default source clock in Master mode */
+		if (i2s->rclk_srcrate == 0)
+			s3c_i2sv2_set_sysclk(dai, SAMSUNG_I2S_RCLKSRC_0,
+							0, SND_SOC_CLOCK_IN);
+		break;
+	default:
+		dev_err(&i2s->pdev->dev, "master/slave format not supported\n");
+		return -EINVAL;
+	}
+
+	if (any_active(i2s) &&
+			((mod & (MOD_SDF_MASK | MOD_LR_RLOW
+				| MOD_SLAVE)) != tmp)) {
+		dev_err(&i2s->pdev->dev,
+				"%s:%d Other DAI busy\n", __func__, __LINE__);
+		return -EAGAIN;
+	}
+
+	mod &= ~(MOD_SDF_MASK | MOD_LR_RLOW | MOD_SLAVE);
+	mod |= tmp;
+	writel(mod, i2s->addr + I2SMOD);
+
+	return 0;
+}
+
+static int s3c_i2sv2_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+	struct i2s_dai *i2s = to_info(dai);
+	u32 mod = readl(i2s->addr + I2SMOD);
+
+	if (!is_secondary(i2s))
+		mod &= ~(MOD_DC2_EN | MOD_DC1_EN);
+
+	switch (params_channels(params)) {
+	case 6:
+		mod |= MOD_DC2_EN;
+	case 4:
+		mod |= MOD_DC1_EN;
+		break;
+	case 2:
+		break;
+	default:
+		dev_err(&i2s->pdev->dev, "%d channels not supported\n",
+				params_channels(params));
+		return -EINVAL;
+	}
+
+	if (is_secondary(i2s))
+		mod &= ~MOD_BLCS_MASK;
+	else
+		mod &= ~MOD_BLCP_MASK;
+
+	if (is_manager(i2s))
+		mod &= ~MOD_BLC_MASK;
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S8:
+		if (is_secondary(i2s))
+			mod |= MOD_BLCS_8BIT;
+		else
+			mod |= MOD_BLCP_8BIT;
+		if (is_manager(i2s))
+			mod |= MOD_BLC_8BIT;
+		break;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		if (is_secondary(i2s))
+			mod |= MOD_BLCS_16BIT;
+		else
+			mod |= MOD_BLCP_16BIT;
+		if (is_manager(i2s))
+			mod |= MOD_BLC_16BIT;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		if (is_secondary(i2s))
+			mod |= MOD_BLCS_24BIT;
+		else
+			mod |= MOD_BLCP_24BIT;
+		if (is_manager(i2s))
+			mod |= MOD_BLC_24BIT;
+		break;
+	default:
+		dev_err(&i2s->pdev->dev, "Format(%d) not supported\n",
+				params_format(params));
+		return -EINVAL;
+	}
+	writel(mod, i2s->addr + I2SMOD);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		snd_soc_dai_set_dma_data(dai, substream,
+			(void *)&i2s->dma_playback);
+	else
+		snd_soc_dai_set_dma_data(dai, substream,
+			(void *)&i2s->dma_capture);
+
+	i2s->frmclk = params_rate(params);
+
+	return 0;
+}
+
+/* We set constraints on the substream acc to the version of I2S */
+static int s3c_i2sv2_startup(struct snd_pcm_substream *substream,
+	  struct snd_soc_dai *dai)
+{
+	struct i2s_dai *i2s = to_info(dai);
+	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
+	unsigned long flags;
+
+	spin_lock_irqsave(&lock, flags);
+
+	i2s->mode |= DAI_OPENED;
+
+	if (is_manager(other))
+		i2s->mode &= ~DAI_MANAGER;
+	else
+		i2s->mode |= DAI_MANAGER;
+
+	/* Enforce set_sysclk in Master mode */
+	i2s->rclk_srcrate = 0;
+
+	spin_unlock_irqrestore(&lock, flags);
+
+	return 0;
+}
+
+static void s3c_i2sv2_shutdown(struct snd_pcm_substream *substream,
+	struct snd_soc_dai *dai)
+{
+	struct i2s_dai *i2s = to_info(dai);
+	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
+	unsigned long flags;
+
+	spin_lock_irqsave(&lock, flags);
+
+	i2s->mode &= ~DAI_OPENED;
+	i2s->mode &= ~DAI_MANAGER;
+
+	if (is_opened(other))
+		other->mode |= DAI_MANAGER;
+
+	/* Reset any constraint on RFS and BFS */
+	i2s->rfs = 0;
+	i2s->bfs = 0;
+
+	spin_unlock_irqrestore(&lock, flags);
+
+	/* Gate CDCLK by default */
+	if (!is_opened(other))
+		s3c_i2sv2_set_sysclk(dai, SAMSUNG_I2S_CDCLK,
+				0, SND_SOC_CLOCK_IN);
+}
+
+static int config_setup(struct i2s_dai *i2s)
+{
+	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
+	unsigned rfs, bfs, blc;
+	u32 psr;
+
+	blc = get_blc(i2s);
+
+	bfs = i2s->bfs;
+
+	if (!bfs && other)
+		bfs = other->bfs;
+
+	/* Select least possible multiple(2) if no constraint set */
+	if (!bfs)
+		bfs = blc * 2;
+
+	rfs = i2s->rfs;
+
+	if (!rfs && other)
+		rfs = other->rfs;
+
+	if ((rfs == 256 || rfs == 512) && (blc == 24)) {
+		dev_err(&i2s->pdev->dev,
+			"%d-RFS not supported for 24-blc\n", rfs);
+		return -EINVAL;
+	}
+
+	if (!rfs) {
+		if (bfs == 16 || bfs == 32)
+			rfs = 256;
+		else
+			rfs = 384;
+	}
+
+	/* If already setup and running */
+	if (any_active(i2s) && (get_rfs(i2s) != rfs || get_bfs(i2s) != bfs)) {
+		dev_err(&i2s->pdev->dev,
+				"%s:%d Other DAI busy\n", __func__, __LINE__);
+		return -EAGAIN;
+	}
+
+	/* We don't care about BFS in Slave mode */
+	if (is_slave(i2s))
+		return 0;
+
+	set_bfs(i2s, bfs);
+	set_rfs(i2s, rfs);
+
+	if (!(i2s->quirks & QUIRK_NO_MUXPSR)) {
+		psr = i2s->rclk_srcrate / i2s->frmclk / rfs;
+		writel(((psr - 1) << 8) | PSR_PSREN, i2s->addr + I2SPSR);
+		dev_dbg(&i2s->pdev->dev,
+			"RCLK_SRC=%luHz PSR=%u, RCLK=%dfs, BCLK=%dfs\n",
+				i2s->rclk_srcrate, psr, rfs, bfs);
+	}
+
+	return 0;
+}
+
+static int i2sv2_i2s_trigger(struct snd_pcm_substream *substream,
+	int cmd, struct snd_soc_dai *dai)
+{
+	int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct i2s_dai *i2s = to_info(rtd->cpu_dai);
+	unsigned long flags;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		local_irq_save(flags);
+
+		if (capture)
+			s3c_i2sv2_fifo(i2s, FIC_RXFLUSH);
+		else
+			s3c_i2sv2_fifo(i2s, FIC_TXFLUSH);
+
+		if (config_setup(i2s)) {
+			local_irq_restore(flags);
+			return -EINVAL;
+		}
+
+		if (capture)
+			s3c_i2sv2_rxctrl(i2s, 1);
+		else
+			s3c_i2sv2_txctrl(i2s, 1);
+
+		local_irq_restore(flags);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		local_irq_save(flags);
+
+		if (capture)
+			s3c_i2sv2_rxctrl(i2s, 0);
+		else
+			s3c_i2sv2_txctrl(i2s, 0);
+
+		local_irq_restore(flags);
+		break;
+	}
+
+	return 0;
+}
+
+static int i2sv2_i2s_set_clkdiv(struct snd_soc_dai *dai,
+	int div_id, int div)
+{
+	struct i2s_dai *i2s = to_info(dai);
+	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
+
+	if (div_id == SAMSUNG_I2S_DIV_BCLK) {
+		if ((any_active(i2s) && div && (get_bfs(i2s) != div))
+			|| (other && other->bfs && (other->bfs != div))) {
+			dev_err(&i2s->pdev->dev,
+				"%s:%d Other DAI busy\n", __func__, __LINE__);
+			return -EAGAIN;
+		}
+		i2s->bfs = div;
+	} else {
+		dev_err(&i2s->pdev->dev,
+			"Invalid clock divider(%d)\n", div_id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static snd_pcm_sframes_t
+i2sv2_i2s_delay(struct snd_pcm_substream *substream, struct snd_soc_dai *dai)
+{
+	struct i2s_dai *i2s = to_info(dai);
+	u32 reg = readl(i2s->addr + I2SFIC);
+	snd_pcm_sframes_t delay;
+
+	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+		delay = FIC_RXCOUNT(reg);
+	else if (is_secondary(i2s))
+		delay = FICS_TXCOUNT(readl(i2s->addr + I2SFICS));
+	else
+		delay = FIC_TXCOUNT(reg);
+
+	return delay;
+}
+
+#ifdef CONFIG_PM
+static int i2sv2_i2s_suspend(struct snd_soc_dai *dai)
+{
+	struct i2s_dai *i2s = to_info(dai);
+
+	if (dai->active) {
+		i2s->suspend_i2smod = readl(i2s->addr + I2SMOD);
+		i2s->suspend_i2scon = readl(i2s->addr + I2SCON);
+		i2s->suspend_i2spsr = readl(i2s->addr + I2SPSR);
+	}
+
+	return 0;
+}
+
+static int i2sv2_i2s_resume(struct snd_soc_dai *dai)
+{
+	struct i2s_dai *i2s = to_info(dai);
+
+	if (dai->active) {
+		writel(i2s->suspend_i2scon, i2s->addr + I2SCON);
+		writel(i2s->suspend_i2smod, i2s->addr + I2SMOD);
+		writel(i2s->suspend_i2spsr, i2s->addr + I2SPSR);
+	}
+
+	return 0;
+}
+#else
+#define i2sv2_i2s_suspend NULL
+#define i2sv2_i2s_resume  NULL
+#endif
+
+static int samsung_i2s_dai_probe(struct snd_soc_dai *dai)
+{
+	struct i2s_dai *i2s = to_info(dai);
+	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
+
+	if (other && other->clk) /* If this is probe on secondary */
+		goto probe_exit;
+
+	i2s->addr = ioremap(i2s->base, 0x100);
+	if (i2s->addr == NULL) {
+		dev_err(&i2s->pdev->dev, "cannot ioremap registers\n");
+		return -ENXIO;
+	}
+
+	i2s->clk = clk_get(&i2s->pdev->dev, "iis");
+	if (IS_ERR(i2s->clk)) {
+		dev_err(&i2s->pdev->dev, "failed to get i2s_clock\n");
+		iounmap(i2s->addr);
+		return -ENOENT;
+	}
+	clk_enable(i2s->clk);
+
+	if (other) {
+		other->addr = i2s->addr;
+		other->clk = i2s->clk;
+	}
+
+	if (i2s->quirks & QUIRK_NEED_RSTCLR)
+		writel(CON_RSTCLR, i2s->addr + I2SCON);
+
+probe_exit:
+	/* Reset any constraint on RFS and BFS */
+	i2s->rfs = 0;
+	i2s->bfs = 0;
+	s3c_i2sv2_txctrl(i2s, 0);
+	s3c_i2sv2_rxctrl(i2s, 0);
+	s3c_i2sv2_fifo(i2s, FIC_TXFLUSH);
+	s3c_i2sv2_fifo(other, FIC_TXFLUSH);
+	s3c_i2sv2_fifo(i2s, FIC_RXFLUSH);
+
+	/* Gate CDCLK by default */
+	if (!is_opened(other))
+		s3c_i2sv2_set_sysclk(dai, SAMSUNG_I2S_CDCLK,
+				0, SND_SOC_CLOCK_IN);
+
+	return 0;
+}
+
+static int samsung_i2s_dai_remove(struct snd_soc_dai *dai)
+{
+	struct i2s_dai *i2s = snd_soc_dai_get_drvdata(dai);
+	struct i2s_dai *other = i2s->pri_dai ? : i2s->sec_dai;
+
+	if (!other || !other->clk) {
+
+		if (i2s->quirks & QUIRK_NEED_RSTCLR)
+			writel(0, i2s->addr + I2SCON);
+
+		clk_disable(i2s->clk);
+		clk_put(i2s->clk);
+
+		iounmap(i2s->addr);
+	}
+
+	i2s->clk = NULL;
+
+	return 0;
+}
+
+static struct snd_soc_dai_ops samsung_i2s_dai_ops = {
+	.trigger = i2sv2_i2s_trigger,
+	.hw_params = s3c_i2sv2_hw_params,
+	.set_fmt = i2sv2_i2s_set_fmt,
+	.set_clkdiv = i2sv2_i2s_set_clkdiv,
+	.set_sysclk = s3c_i2sv2_set_sysclk,
+	.startup = s3c_i2sv2_startup,
+	.shutdown = s3c_i2sv2_shutdown,
+	.delay = i2sv2_i2s_delay,
+};
+
+#define SAMSUNG_I2S_RATES \
+	(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
+	SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+	SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
+
+#define SAMSUNG_I2S_FMTS \
+	(SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\
+	 SNDRV_PCM_FMTBIT_S24_LE)
+
+static __devinit
+struct i2s_dai *s3c_alloc_dai(struct platform_device *pdev, bool sec)
+{
+	struct i2s_dai *i2s;
+
+	i2s = kzalloc(sizeof(struct i2s_dai), GFP_KERNEL);
+	if (i2s == NULL)
+		return NULL;
+
+	i2s->pdev = pdev;
+	i2s->pri_dai = NULL;
+	i2s->sec_dai = NULL;
+	i2s->s3c_i2s_drv.symmetric_rates = 1;
+	i2s->s3c_i2s_drv.probe = samsung_i2s_dai_probe;
+	i2s->s3c_i2s_drv.remove = samsung_i2s_dai_remove;
+	i2s->s3c_i2s_drv.ops = &samsung_i2s_dai_ops;
+	i2s->s3c_i2s_drv.suspend = i2sv2_i2s_suspend;
+	i2s->s3c_i2s_drv.resume = i2sv2_i2s_resume;
+	i2s->s3c_i2s_drv.playback.channels_min = 2;
+	i2s->s3c_i2s_drv.playback.channels_max = 2;
+	i2s->s3c_i2s_drv.playback.rates = SAMSUNG_I2S_RATES;
+	i2s->s3c_i2s_drv.playback.formats = SAMSUNG_I2S_FMTS;
+
+	if (!sec) {
+		i2s->s3c_i2s_drv.capture.channels_min = 2;
+		i2s->s3c_i2s_drv.capture.channels_max = 2;
+		i2s->s3c_i2s_drv.capture.rates = SAMSUNG_I2S_RATES;
+		i2s->s3c_i2s_drv.capture.formats = SAMSUNG_I2S_FMTS;
+	} else {	/* Create a new platform_device for Secondary */
+		i2s->pdev = platform_device_register_resndata(NULL,
+				pdev->name, pdev->id + MAX_I2S,
+				NULL, 0, NULL, 0);
+		if (IS_ERR(i2s->pdev)) {
+			kfree(i2s);
+			return NULL;
+		}
+	}
+
+	/* Pre-assign snd_soc_dai_set_drvdata */
+	dev_set_drvdata(&i2s->pdev->dev, i2s);
+
+	return i2s;
+}
+
+static __devinit int samsung_i2s_probe(struct platform_device *pdev)
+{
+	u32 dma_pl_chan, dma_cp_chan, dma_pl_sec_chan;
+	struct i2s_dai *pri_dai, *sec_dai = NULL;
+	struct s3c_audio_pdata *i2s_pdata;
+	struct samsung_i2s *i2s_cfg;
+	struct resource *res;
+	u32 regs_base, quirks;
+	int ret = 0;
+
+	/* Call during Seconday interface registration */
+	if (pdev->id >= MAX_I2S) {
+		sec_dai = dev_get_drvdata(&pdev->dev);
+		snd_soc_register_dai(&sec_dai->pdev->dev,
+			&sec_dai->s3c_i2s_drv);
+		return 0;
+	}
+
+	i2s_pdata = pdev->dev.platform_data;
+	if (i2s_pdata == NULL) {
+		dev_err(&pdev->dev, "Can't work without s3c_audio_pdata\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Unable to get I2S-TX dma resource\n");
+		return -ENXIO;
+	}
+	dma_pl_chan = res->start;
+
+	res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (!res) {
+		dev_err(&pdev->dev, "Unable to get I2S-RX dma resource\n");
+		return -ENXIO;
+	}
+	dma_cp_chan = res->start;
+
+	res = platform_get_resource(pdev, IORESOURCE_DMA, 2);
+	if (res)
+		dma_pl_sec_chan = res->start;
+	else
+		dma_pl_sec_chan = 0;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Unable to get I2S SFR address\n");
+		return -ENXIO;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res),
+							"samsung-i2s")) {
+		dev_err(&pdev->dev, "Unable to request SFR region\n");
+		return -EBUSY;
+	}
+	regs_base = res->start;
+
+	i2s_cfg = &i2s_pdata->type.i2s;
+	quirks = i2s_cfg->quirks;
+
+	pri_dai = s3c_alloc_dai(pdev, false);
+	if (!pri_dai) {
+		dev_err(&pdev->dev, "Unable to alloc I2S_pri\n");
+		ret = -ENOMEM;
+		goto err1;
+	}
+
+	pri_dai->dma_playback.dma_addr = regs_base + I2STXD;
+	pri_dai->dma_capture.dma_addr = regs_base + I2SRXD;
+	pri_dai->dma_playback.client =
+		(struct s3c2410_dma_client *)&pri_dai->dma_playback;
+	pri_dai->dma_capture.client =
+		(struct s3c2410_dma_client *)&pri_dai->dma_capture;
+	pri_dai->dma_playback.channel = dma_pl_chan;
+	pri_dai->dma_capture.channel = dma_cp_chan;
+	pri_dai->src_clk = i2s_cfg->src_clk;
+	pri_dai->dma_playback.dma_size = 4;
+	pri_dai->dma_capture.dma_size = 4;
+	pri_dai->base = regs_base;
+	pri_dai->quirks = quirks;
+
+	if (quirks & QUIRK_PRI_6CHAN)
+		pri_dai->s3c_i2s_drv.playback.channels_max = 6;
+
+	if (quirks & QUIRK_SEC_DAI) {
+		sec_dai = s3c_alloc_dai(pdev, true);
+		if (!sec_dai) {
+			dev_err(&pdev->dev, "Unable to alloc I2S_sec\n");
+			ret = -ENOMEM;
+			goto err2;
+		}
+		sec_dai->dma_playback.dma_addr = regs_base + I2STXDS;
+		sec_dai->dma_playback.client =
+			(struct s3c2410_dma_client *)&sec_dai->dma_playback;
+		/* Use iDMA always if SysDMA not provided */
+		sec_dai->dma_playback.channel = dma_pl_sec_chan ? : -1;
+		sec_dai->src_clk = i2s_cfg->src_clk;
+		sec_dai->dma_playback.dma_size = 4;
+		sec_dai->base = regs_base;
+		sec_dai->quirks = quirks;
+		sec_dai->pri_dai = pri_dai;
+		pri_dai->sec_dai = sec_dai;
+	}
+
+	if (i2s_pdata->cfg_gpio && i2s_pdata->cfg_gpio(pdev)) {
+		dev_err(&pdev->dev, "Unable to configure gpio\n");
+		ret = -EINVAL;
+		goto err3;
+	}
+
+	snd_soc_register_dai(&pri_dai->pdev->dev, &pri_dai->s3c_i2s_drv);
+
+	return 0;
+err3:
+	kfree(sec_dai);
+err2:
+	kfree(pri_dai);
+err1:
+	release_mem_region(regs_base, resource_size(res));
+
+	return ret;
+}
+
+static __devexit int samsung_i2s_remove(struct platform_device *pdev)
+{
+	struct i2s_dai *i2s, *other;
+
+	i2s = dev_get_drvdata(&pdev->dev);
+	other = i2s->pri_dai ? : i2s->sec_dai;
+
+	if (other) {
+		other->pri_dai = NULL;
+		other->sec_dai = NULL;
+	} else {
+		struct resource *res;
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (res)
+			release_mem_region(res->start, resource_size(res));
+	}
+
+	i2s->pri_dai = NULL;
+	i2s->sec_dai = NULL;
+
+	kfree(i2s);
+
+	snd_soc_unregister_dai(&pdev->dev);
+
+	return 0;
+}
+
+static struct platform_driver samsung_i2s_driver = {
+	.probe  = samsung_i2s_probe,
+	.remove = samsung_i2s_remove,
+	.driver = {
+		.name = "samsung-i2s",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init samsung_i2s_init(void)
+{
+	return platform_driver_register(&samsung_i2s_driver);
+}
+module_init(samsung_i2s_init);
+
+static void __exit samsung_i2s_exit(void)
+{
+	platform_driver_unregister(&samsung_i2s_driver);
+}
+module_exit(samsung_i2s_exit);
+
+/* Module information */
+MODULE_AUTHOR("Jaswinder Singh, <jassi.brar@samsung.com>");
+MODULE_DESCRIPTION("Samsung I2S Interface");
+MODULE_ALIAS("platform:samsung-i2s");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/samsung/i2s.h b/sound/soc/samsung/i2s.h
new file mode 100644
index 0000000..73a71cd
--- /dev/null
+++ b/sound/soc/samsung/i2s.h
@@ -0,0 +1,29 @@
+/* sound/soc/samsung/i2s.h
+ *
+ * ALSA SoC Audio Layer - Samsung I2S Controller driver
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SND_SOC_SAMSUNG_I2S_H
+#define __SND_SOC_SAMSUNG_I2S_H
+
+/*
+ * Maximum number of I2S blocks that any SoC can have.
+ * The secondary interface of a CPU dai(if there exists any),
+ * is indexed at [cpu-dai's ID + MAX_I2S]
+ */
+#define MAX_I2S	4
+
+#define SAMSUNG_I2S_DIV_BCLK	1
+
+#define SAMSUNG_I2S_RCLKSRC_0	0
+#define SAMSUNG_I2S_RCLKSRC_1	1
+#define SAMSUNG_I2S_CDCLK		2
+
+#endif /* __SND_SOC_SAMSUNG_I2S_H */
diff --git a/sound/soc/samsung/jive_wm8750.c b/sound/soc/samsung/jive_wm8750.c
new file mode 100644
index 0000000..fe1649e
--- /dev/null
+++ b/sound/soc/samsung/jive_wm8750.c
@@ -0,0 +1,191 @@
+/* sound/soc/samsung/jive_wm8750.c
+ *
+ * Copyright 2007,2008 Simtec Electronics
+ *
+ * Based on sound/soc/pxa/spitz.c
+ *	Copyright 2005 Wolfson Microelectronics PLC.
+ *	Copyright 2005 Openedhand Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+
+#include "dma.h"
+#include "s3c2412-i2s.h"
+
+#include "../codecs/wm8750.h"
+
+static const struct snd_soc_dapm_route audio_map[] = {
+	{ "Headphone Jack", NULL, "LOUT1" },
+	{ "Headphone Jack", NULL, "ROUT1" },
+	{ "Internal Speaker", NULL, "LOUT2" },
+	{ "Internal Speaker", NULL, "ROUT2" },
+	{ "LINPUT1", NULL, "Line Input" },
+	{ "RINPUT1", NULL, "Line Input" },
+};
+
+static const struct snd_soc_dapm_widget wm8750_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_SPK("Internal Speaker", NULL),
+	SND_SOC_DAPM_LINE("Line In", NULL),
+};
+
+static int jive_hw_params(struct snd_pcm_substream *substream,
+			  struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct s3c_i2sv2_rate_calc div;
+	unsigned int clk = 0;
+	int ret = 0;
+
+	switch (params_rate(params)) {
+	case 8000:
+	case 16000:
+	case 48000:
+	case 96000:
+		clk = 12288000;
+		break;
+	case 11025:
+	case 22050:
+	case 44100:
+		clk = 11289600;
+		break;
+	}
+
+	s3c_i2sv2_iis_calc_rate(&div, NULL, params_rate(params),
+				s3c_i2sv2_get_clock(cpu_dai));
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C2412_DIV_RCLK, div.fs_div);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C2412_DIV_PRESCALER,
+				     div.clk_div - 1);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct snd_soc_ops jive_ops = {
+	.hw_params	= jive_hw_params,
+};
+
+static int jive_wm8750_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	int err;
+
+	/* These endpoints are not being used. */
+	snd_soc_dapm_nc_pin(codec, "LINPUT2");
+	snd_soc_dapm_nc_pin(codec, "RINPUT2");
+	snd_soc_dapm_nc_pin(codec, "LINPUT3");
+	snd_soc_dapm_nc_pin(codec, "RINPUT3");
+	snd_soc_dapm_nc_pin(codec, "OUT3");
+	snd_soc_dapm_nc_pin(codec, "MONO");
+
+	/* Add jive specific widgets */
+	err = snd_soc_dapm_new_controls(codec, wm8750_dapm_widgets,
+					ARRAY_SIZE(wm8750_dapm_widgets));
+	if (err) {
+		printk(KERN_ERR "%s: failed to add widgets (%d)\n",
+		       __func__, err);
+		return err;
+	}
+
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+	snd_soc_dapm_sync(codec);
+
+	return 0;
+}
+
+static struct snd_soc_dai_link jive_dai = {
+	.name		= "wm8750",
+	.stream_name	= "WM8750",
+	.cpu_dai_name	= "s3c2412-i2s",
+	.codec_dai_name = "wm8750-hifi",
+	.platform_name	= "samsung-audio",
+	.codec_name	= "wm8750-codec.0-0x1a",
+	.init		= jive_wm8750_init,
+	.ops		= &jive_ops,
+};
+
+/* jive audio machine driver */
+static struct snd_soc_card snd_soc_machine_jive = {
+	.name		= "Jive",
+	.dai_link	= &jive_dai,
+	.num_links	= 1,
+};
+
+static struct platform_device *jive_snd_device;
+
+static int __init jive_init(void)
+{
+	int ret;
+
+	if (!machine_is_jive())
+		return 0;
+
+	printk("JIVE WM8750 Audio support\n");
+
+	jive_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!jive_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(jive_snd_device, &snd_soc_machine_jive);
+	ret = platform_device_add(jive_snd_device);
+
+	if (ret)
+		platform_device_put(jive_snd_device);
+
+	return ret;
+}
+
+static void __exit jive_exit(void)
+{
+	platform_device_unregister(jive_snd_device);
+}
+
+module_init(jive_init);
+module_exit(jive_exit);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("ALSA SoC Jive Audio support");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/samsung/lm4857.h b/sound/soc/samsung/lm4857.h
new file mode 100644
index 0000000..0cf5b70
--- /dev/null
+++ b/sound/soc/samsung/lm4857.h
@@ -0,0 +1,32 @@
+/*
+ * lm4857.h  --  ALSA Soc Audio Layer
+ *
+ * Copyright 2007 Wolfson Microelectronics PLC.
+ * Author: Graeme Gregory
+ *         graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  Revision history
+ *    18th Jun 2007   Initial version.
+ */
+
+#ifndef LM4857_H_
+#define LM4857_H_
+
+/* The register offsets in the cache array */
+#define LM4857_MVOL 0
+#define LM4857_LVOL 1
+#define LM4857_RVOL 2
+#define LM4857_CTRL 3
+
+/* the shifts required to set these bits */
+#define LM4857_3D 5
+#define LM4857_WAKEUP 5
+#define LM4857_EPGAIN 4
+
+#endif /*LM4857_H_*/
+
diff --git a/sound/soc/samsung/ln2440sbc_alc650.c b/sound/soc/samsung/ln2440sbc_alc650.c
new file mode 100644
index 0000000..e507174
--- /dev/null
+++ b/sound/soc/samsung/ln2440sbc_alc650.c
@@ -0,0 +1,78 @@
+/*
+ * SoC audio for ln2440sbc
+ *
+ * Copyright 2007 KonekTel, a.s.
+ * Author: Ivan Kuten
+ *         ivan.kuten@promwad.com
+ *
+ * Heavily based on smdk2443_wm9710.c
+ * Copyright 2007 Wolfson Microelectronics PLC.
+ * Author: Graeme Gregory
+ *         graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include "dma.h"
+#include "ac97.h"
+
+static struct snd_soc_card ln2440sbc;
+
+static struct snd_soc_dai_link ln2440sbc_dai[] = {
+{
+	.name = "AC97",
+	.stream_name = "AC97 HiFi",
+	.cpu_dai_name = "samsung-ac97",
+	.codec_dai_name = "ac97-hifi",
+	.codec_name = "ac97-codec",
+	.platform_name = "samsung-audio",
+},
+};
+
+static struct snd_soc_card ln2440sbc = {
+	.name = "LN2440SBC",
+	.dai_link = ln2440sbc_dai,
+	.num_links = ARRAY_SIZE(ln2440sbc_dai),
+};
+
+static struct platform_device *ln2440sbc_snd_ac97_device;
+
+static int __init ln2440sbc_init(void)
+{
+	int ret;
+
+	ln2440sbc_snd_ac97_device = platform_device_alloc("soc-audio", -1);
+	if (!ln2440sbc_snd_ac97_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(ln2440sbc_snd_ac97_device, &ln2440sbc);
+	ret = platform_device_add(ln2440sbc_snd_ac97_device);
+
+	if (ret)
+		platform_device_put(ln2440sbc_snd_ac97_device);
+
+	return ret;
+}
+
+static void __exit ln2440sbc_exit(void)
+{
+	platform_device_unregister(ln2440sbc_snd_ac97_device);
+}
+
+module_init(ln2440sbc_init);
+module_exit(ln2440sbc_exit);
+
+/* Module information */
+MODULE_AUTHOR("Ivan Kuten");
+MODULE_DESCRIPTION("ALSA SoC ALC650 LN2440SBC");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/samsung/neo1973_gta02_wm8753.c b/sound/soc/samsung/neo1973_gta02_wm8753.c
new file mode 100644
index 0000000..c4b2013
--- /dev/null
+++ b/sound/soc/samsung/neo1973_gta02_wm8753.c
@@ -0,0 +1,504 @@
+/*
+ * neo1973_gta02_wm8753.c  --  SoC audio for Openmoko Freerunner(GTA02)
+ *
+ * Copyright 2007 Openmoko Inc
+ * Author: Graeme Gregory <graeme@openmoko.org>
+ * Copyright 2007 Wolfson Microelectronics PLC.
+ * Author: Graeme Gregory <linux@wolfsonmicro.com>
+ * Copyright 2009 Wolfson Microelectronics
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+
+#include <plat/regs-iis.h>
+
+#include <mach/regs-clock.h>
+#include <asm/io.h>
+#include <mach/gta02.h>
+#include "../codecs/wm8753.h"
+#include "dma.h"
+#include "s3c24xx-i2s.h"
+
+static struct snd_soc_card neo1973_gta02;
+
+static int neo1973_gta02_hifi_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	unsigned int pll_out = 0, bclk = 0;
+	int ret = 0;
+	unsigned long iis_clkrate;
+
+	iis_clkrate = s3c24xx_i2s_get_clockrate();
+
+	switch (params_rate(params)) {
+	case 8000:
+	case 16000:
+		pll_out = 12288000;
+		break;
+	case 48000:
+		bclk = WM8753_BCLK_DIV_4;
+		pll_out = 12288000;
+		break;
+	case 96000:
+		bclk = WM8753_BCLK_DIV_2;
+		pll_out = 12288000;
+		break;
+	case 11025:
+		bclk = WM8753_BCLK_DIV_16;
+		pll_out = 11289600;
+		break;
+	case 22050:
+		bclk = WM8753_BCLK_DIV_8;
+		pll_out = 11289600;
+		break;
+	case 44100:
+		bclk = WM8753_BCLK_DIV_4;
+		pll_out = 11289600;
+		break;
+	case 88200:
+		bclk = WM8753_BCLK_DIV_2;
+		pll_out = 11289600;
+		break;
+	}
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai,
+		SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+		SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai,
+		SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+		SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_MCLK, pll_out,
+		SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* set MCLK division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
+		S3C2410_IISMOD_32FS);
+	if (ret < 0)
+		return ret;
+
+	/* set codec BCLK division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(codec_dai,
+					WM8753_BCLKDIV, bclk);
+	if (ret < 0)
+		return ret;
+
+	/* set prescaler division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
+		S3C24XX_PRESCALE(4, 4));
+	if (ret < 0)
+		return ret;
+
+	/* codec PLL input is PCLK/4 */
+	ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0,
+		iis_clkrate / 4, pll_out);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int neo1973_gta02_hifi_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+
+	/* disable the PLL */
+	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0, 0);
+}
+
+/*
+ * Neo1973 WM8753 HiFi DAI opserations.
+ */
+static struct snd_soc_ops neo1973_gta02_hifi_ops = {
+	.hw_params = neo1973_gta02_hifi_hw_params,
+	.hw_free = neo1973_gta02_hifi_hw_free,
+};
+
+static int neo1973_gta02_voice_hw_params(
+	struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	unsigned int pcmdiv = 0;
+	int ret = 0;
+	unsigned long iis_clkrate;
+
+	iis_clkrate = s3c24xx_i2s_get_clockrate();
+
+	if (params_rate(params) != 8000)
+		return -EINVAL;
+	if (params_channels(params) != 1)
+		return -EINVAL;
+
+	pcmdiv = WM8753_PCM_DIV_6; /* 2.048 MHz */
+
+	/* todo: gg check mode (DSP_B) against CSR datasheet */
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B |
+		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_PCMCLK,
+		12288000, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* set codec PCM division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_PCMDIV,
+					pcmdiv);
+	if (ret < 0)
+		return ret;
+
+	/* configue and enable PLL for 12.288MHz output */
+	ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0,
+		iis_clkrate / 4, 12288000);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int neo1973_gta02_voice_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+
+	/* disable the PLL */
+	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0, 0);
+}
+
+static struct snd_soc_ops neo1973_gta02_voice_ops = {
+	.hw_params = neo1973_gta02_voice_hw_params,
+	.hw_free = neo1973_gta02_voice_hw_free,
+};
+
+#define LM4853_AMP 1
+#define LM4853_SPK 2
+
+static u8 lm4853_state;
+
+/* This has no effect, it exists only to maintain compatibility with
+ * existing ALSA state files.
+ */
+static int lm4853_set_state(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	int val = ucontrol->value.integer.value[0];
+
+	if (val)
+		lm4853_state |= LM4853_AMP;
+	else
+		lm4853_state &= ~LM4853_AMP;
+
+	return 0;
+}
+
+static int lm4853_get_state(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.integer.value[0] = lm4853_state & LM4853_AMP;
+
+	return 0;
+}
+
+static int lm4853_set_spk(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	int val = ucontrol->value.integer.value[0];
+
+	if (val) {
+		lm4853_state |= LM4853_SPK;
+		gpio_set_value(GTA02_GPIO_HP_IN, 0);
+	} else {
+		lm4853_state &= ~LM4853_SPK;
+		gpio_set_value(GTA02_GPIO_HP_IN, 1);
+	}
+
+	return 0;
+}
+
+static int lm4853_get_spk(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.integer.value[0] = (lm4853_state & LM4853_SPK) >> 1;
+
+	return 0;
+}
+
+static int lm4853_event(struct snd_soc_dapm_widget *w,
+			struct snd_kcontrol *k,
+			int event)
+{
+	gpio_set_value(GTA02_GPIO_AMP_SHUT, SND_SOC_DAPM_EVENT_OFF(event));
+
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = {
+	SND_SOC_DAPM_SPK("Stereo Out", lm4853_event),
+	SND_SOC_DAPM_LINE("GSM Line Out", NULL),
+	SND_SOC_DAPM_LINE("GSM Line In", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_MIC("Handset Mic", NULL),
+	SND_SOC_DAPM_SPK("Handset Spk", NULL),
+};
+
+
+/* example machine audio_mapnections */
+static const struct snd_soc_dapm_route audio_map[] = {
+
+	/* Connections to the lm4853 amp */
+	{"Stereo Out", NULL, "LOUT1"},
+	{"Stereo Out", NULL, "ROUT1"},
+
+	/* Connections to the GSM Module */
+	{"GSM Line Out", NULL, "MONO1"},
+	{"GSM Line Out", NULL, "MONO2"},
+	{"RXP", NULL, "GSM Line In"},
+	{"RXN", NULL, "GSM Line In"},
+
+	/* Connections to Headset */
+	{"MIC1", NULL, "Mic Bias"},
+	{"Mic Bias", NULL, "Headset Mic"},
+
+	/* Call Mic */
+	{"MIC2", NULL, "Mic Bias"},
+	{"MIC2N", NULL, "Mic Bias"},
+	{"Mic Bias", NULL, "Handset Mic"},
+
+	/* Call Speaker */
+	{"Handset Spk", NULL, "LOUT2"},
+	{"Handset Spk", NULL, "ROUT2"},
+
+	/* Connect the ALC pins */
+	{"ACIN", NULL, "ACOP"},
+};
+
+static const struct snd_kcontrol_new wm8753_neo1973_gta02_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Stereo Out"),
+	SOC_DAPM_PIN_SWITCH("GSM Line Out"),
+	SOC_DAPM_PIN_SWITCH("GSM Line In"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+	SOC_DAPM_PIN_SWITCH("Handset Mic"),
+	SOC_DAPM_PIN_SWITCH("Handset Spk"),
+
+	/* This has no effect, it exists only to maintain compatibility with
+	 * existing ALSA state files.
+	 */
+	SOC_SINGLE_EXT("Amp State Switch", 6, 0, 1, 0,
+		lm4853_get_state,
+		lm4853_set_state),
+	SOC_SINGLE_EXT("Amp Spk Switch", 7, 0, 1, 0,
+		lm4853_get_spk,
+		lm4853_set_spk),
+};
+
+/*
+ * This is an example machine initialisation for a wm8753 connected to a
+ * neo1973 GTA02.
+ */
+static int neo1973_gta02_wm8753_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	int err;
+
+	/* set up NC codec pins */
+	snd_soc_dapm_nc_pin(codec, "OUT3");
+	snd_soc_dapm_nc_pin(codec, "OUT4");
+	snd_soc_dapm_nc_pin(codec, "LINE1");
+	snd_soc_dapm_nc_pin(codec, "LINE2");
+
+	/* Add neo1973 gta02 specific widgets */
+	snd_soc_dapm_new_controls(codec, wm8753_dapm_widgets,
+				  ARRAY_SIZE(wm8753_dapm_widgets));
+
+	/* add neo1973 gta02 specific controls */
+	err = snd_soc_add_controls(codec, wm8753_neo1973_gta02_controls,
+		ARRAY_SIZE(wm8753_neo1973_gta02_controls));
+
+	if (err < 0)
+		return err;
+
+	/* set up neo1973 gta02 specific audio path audio_map */
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+	/* set endpoints to default off mode */
+	snd_soc_dapm_disable_pin(codec, "Stereo Out");
+	snd_soc_dapm_disable_pin(codec, "GSM Line Out");
+	snd_soc_dapm_disable_pin(codec, "GSM Line In");
+	snd_soc_dapm_disable_pin(codec, "Headset Mic");
+	snd_soc_dapm_disable_pin(codec, "Handset Mic");
+	snd_soc_dapm_disable_pin(codec, "Handset Spk");
+
+	/* allow audio paths from the GSM modem to run during suspend */
+	snd_soc_dapm_ignore_suspend(codec, "Stereo Out");
+	snd_soc_dapm_ignore_suspend(codec, "GSM Line Out");
+	snd_soc_dapm_ignore_suspend(codec, "GSM Line In");
+	snd_soc_dapm_ignore_suspend(codec, "Headset Mic");
+	snd_soc_dapm_ignore_suspend(codec, "Handset Mic");
+	snd_soc_dapm_ignore_suspend(codec, "Handset Spk");
+
+	snd_soc_dapm_sync(codec);
+
+	return 0;
+}
+
+/*
+ * BT Codec DAI
+ */
+static struct snd_soc_dai_driver bt_dai = {
+	.name = "bluetooth-dai",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 1,
+		.rates = SNDRV_PCM_RATE_8000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 1,
+		.rates = SNDRV_PCM_RATE_8000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+};
+
+static struct snd_soc_dai_link neo1973_gta02_dai[] = {
+{ /* Hifi Playback - for similatious use with voice below */
+	.name = "WM8753",
+	.stream_name = "WM8753 HiFi",
+	.cpu_dai_name = "s3c24xx-i2s",
+	.codec_dai_name = "wm8753-hifi",
+	.init = neo1973_gta02_wm8753_init,
+	.platform_name = "samsung-audio",
+	.codec_name = "wm8753-codec.0-0x1a",
+	.ops = &neo1973_gta02_hifi_ops,
+},
+{ /* Voice via BT */
+	.name = "Bluetooth",
+	.stream_name = "Voice",
+	.cpu_dai_name = "bluetooth-dai",
+	.codec_dai_name = "wm8753-voice",
+	.ops = &neo1973_gta02_voice_ops,
+	.codec_name = "wm8753-codec.0-0x1a",
+	.platform_name = "samsung-audio",
+},
+};
+
+static struct snd_soc_card neo1973_gta02 = {
+	.name = "neo1973-gta02",
+	.dai_link = neo1973_gta02_dai,
+	.num_links = ARRAY_SIZE(neo1973_gta02_dai),
+};
+
+static struct platform_device *neo1973_gta02_snd_device;
+
+static int __init neo1973_gta02_init(void)
+{
+	int ret;
+
+	if (!machine_is_neo1973_gta02()) {
+		printk(KERN_INFO
+		       "Only GTA02 is supported by this ASoC driver\n");
+		return -ENODEV;
+	}
+
+	neo1973_gta02_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!neo1973_gta02_snd_device)
+		return -ENOMEM;
+
+	/* register bluetooth DAI here */
+	ret = snd_soc_register_dai(&neo1973_gta02_snd_device->dev, -1, &bt_dai);
+	if (ret) {
+		platform_device_put(neo1973_gta02_snd_device);
+		return ret;
+	}
+
+	platform_set_drvdata(neo1973_gta02_snd_device, &neo1973_gta02);
+	ret = platform_device_add(neo1973_gta02_snd_device);
+
+	if (ret) {
+		platform_device_put(neo1973_gta02_snd_device);
+		return ret;
+	}
+
+	/* Initialise GPIOs used by amp */
+	ret = gpio_request(GTA02_GPIO_HP_IN, "GTA02_HP_IN");
+	if (ret) {
+		pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_HP_IN);
+		goto err_unregister_device;
+	}
+
+	ret = gpio_direction_output(GTA02_GPIO_HP_IN, 1);
+	if (ret) {
+		pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_HP_IN);
+		goto err_free_gpio_hp_in;
+	}
+
+	ret = gpio_request(GTA02_GPIO_AMP_SHUT, "GTA02_AMP_SHUT");
+	if (ret) {
+		pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_AMP_SHUT);
+		goto err_free_gpio_hp_in;
+	}
+
+	ret = gpio_direction_output(GTA02_GPIO_AMP_SHUT, 1);
+	if (ret) {
+		pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_AMP_SHUT);
+		goto err_free_gpio_amp_shut;
+	}
+
+	return 0;
+
+err_free_gpio_amp_shut:
+	gpio_free(GTA02_GPIO_AMP_SHUT);
+err_free_gpio_hp_in:
+	gpio_free(GTA02_GPIO_HP_IN);
+err_unregister_device:
+	platform_device_unregister(neo1973_gta02_snd_device);
+	return ret;
+}
+module_init(neo1973_gta02_init);
+
+static void __exit neo1973_gta02_exit(void)
+{
+	snd_soc_unregister_dai(&neo1973_gta02_snd_device->dev, -1);
+	platform_device_unregister(neo1973_gta02_snd_device);
+	gpio_free(GTA02_GPIO_HP_IN);
+	gpio_free(GTA02_GPIO_AMP_SHUT);
+}
+module_exit(neo1973_gta02_exit);
+
+/* Module information */
+MODULE_AUTHOR("Graeme Gregory, graeme@openmoko.org");
+MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973 GTA02");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c
new file mode 100644
index 0000000..96dda57
--- /dev/null
+++ b/sound/soc/samsung/neo1973_wm8753.c
@@ -0,0 +1,704 @@
+/*
+ * neo1973_wm8753.c  --  SoC audio for Neo1973
+ *
+ * Copyright 2007 Wolfson Microelectronics PLC.
+ * Author: Graeme Gregory
+ *         graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/tlv.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware/scoop.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+#include <linux/io.h>
+#include <mach/spi-gpio.h>
+
+#include <plat/regs-iis.h>
+
+#include "../codecs/wm8753.h"
+#include "lm4857.h"
+#include "dma.h"
+#include "s3c24xx-i2s.h"
+
+/* define the scenarios */
+#define NEO_AUDIO_OFF			0
+#define NEO_GSM_CALL_AUDIO_HANDSET	1
+#define NEO_GSM_CALL_AUDIO_HEADSET	2
+#define NEO_GSM_CALL_AUDIO_BLUETOOTH	3
+#define NEO_STEREO_TO_SPEAKERS		4
+#define NEO_STEREO_TO_HEADPHONES	5
+#define NEO_CAPTURE_HANDSET		6
+#define NEO_CAPTURE_HEADSET		7
+#define NEO_CAPTURE_BLUETOOTH		8
+
+static struct snd_soc_card neo1973;
+static struct i2c_client *i2c;
+
+static int neo1973_hifi_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	unsigned int pll_out = 0, bclk = 0;
+	int ret = 0;
+	unsigned long iis_clkrate;
+
+	pr_debug("Entered %s\n", __func__);
+
+	iis_clkrate = s3c24xx_i2s_get_clockrate();
+
+	switch (params_rate(params)) {
+	case 8000:
+	case 16000:
+		pll_out = 12288000;
+		break;
+	case 48000:
+		bclk = WM8753_BCLK_DIV_4;
+		pll_out = 12288000;
+		break;
+	case 96000:
+		bclk = WM8753_BCLK_DIV_2;
+		pll_out = 12288000;
+		break;
+	case 11025:
+		bclk = WM8753_BCLK_DIV_16;
+		pll_out = 11289600;
+		break;
+	case 22050:
+		bclk = WM8753_BCLK_DIV_8;
+		pll_out = 11289600;
+		break;
+	case 44100:
+		bclk = WM8753_BCLK_DIV_4;
+		pll_out = 11289600;
+		break;
+	case 88200:
+		bclk = WM8753_BCLK_DIV_2;
+		pll_out = 11289600;
+		break;
+	}
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai,
+		SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+		SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai,
+		SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+		SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_MCLK, pll_out,
+		SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* set MCLK division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
+		S3C2410_IISMOD_32FS);
+	if (ret < 0)
+		return ret;
+
+	/* set codec BCLK division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_BCLKDIV, bclk);
+	if (ret < 0)
+		return ret;
+
+	/* set prescaler division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
+		S3C24XX_PRESCALE(4, 4));
+	if (ret < 0)
+		return ret;
+
+	/* codec PLL input is PCLK/4 */
+	ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0,
+		iis_clkrate / 4, pll_out);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int neo1973_hifi_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+
+	pr_debug("Entered %s\n", __func__);
+
+	/* disable the PLL */
+	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0, 0);
+}
+
+/*
+ * Neo1973 WM8753 HiFi DAI opserations.
+ */
+static struct snd_soc_ops neo1973_hifi_ops = {
+	.hw_params = neo1973_hifi_hw_params,
+	.hw_free = neo1973_hifi_hw_free,
+};
+
+static int neo1973_voice_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	unsigned int pcmdiv = 0;
+	int ret = 0;
+	unsigned long iis_clkrate;
+
+	pr_debug("Entered %s\n", __func__);
+
+	iis_clkrate = s3c24xx_i2s_get_clockrate();
+
+	if (params_rate(params) != 8000)
+		return -EINVAL;
+	if (params_channels(params) != 1)
+		return -EINVAL;
+
+	pcmdiv = WM8753_PCM_DIV_6; /* 2.048 MHz */
+
+	/* todo: gg check mode (DSP_B) against CSR datasheet */
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B |
+		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_PCMCLK, 12288000,
+		SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* set codec PCM division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_PCMDIV, pcmdiv);
+	if (ret < 0)
+		return ret;
+
+	/* configue and enable PLL for 12.288MHz output */
+	ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0,
+		iis_clkrate / 4, 12288000);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int neo1973_voice_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+
+	pr_debug("Entered %s\n", __func__);
+
+	/* disable the PLL */
+	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0, 0);
+}
+
+static struct snd_soc_ops neo1973_voice_ops = {
+	.hw_params = neo1973_voice_hw_params,
+	.hw_free = neo1973_voice_hw_free,
+};
+
+static int neo1973_scenario;
+
+static int neo1973_get_scenario(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.integer.value[0] = neo1973_scenario;
+	return 0;
+}
+
+static int set_scenario_endpoints(struct snd_soc_codec *codec, int scenario)
+{
+	pr_debug("Entered %s\n", __func__);
+
+	switch (neo1973_scenario) {
+	case NEO_AUDIO_OFF:
+		snd_soc_dapm_disable_pin(codec, "Audio Out");
+		snd_soc_dapm_disable_pin(codec, "GSM Line Out");
+		snd_soc_dapm_disable_pin(codec, "GSM Line In");
+		snd_soc_dapm_disable_pin(codec, "Headset Mic");
+		snd_soc_dapm_disable_pin(codec, "Call Mic");
+		break;
+	case NEO_GSM_CALL_AUDIO_HANDSET:
+		snd_soc_dapm_enable_pin(codec, "Audio Out");
+		snd_soc_dapm_enable_pin(codec, "GSM Line Out");
+		snd_soc_dapm_enable_pin(codec, "GSM Line In");
+		snd_soc_dapm_disable_pin(codec, "Headset Mic");
+		snd_soc_dapm_enable_pin(codec, "Call Mic");
+		break;
+	case NEO_GSM_CALL_AUDIO_HEADSET:
+		snd_soc_dapm_enable_pin(codec, "Audio Out");
+		snd_soc_dapm_enable_pin(codec, "GSM Line Out");
+		snd_soc_dapm_enable_pin(codec, "GSM Line In");
+		snd_soc_dapm_enable_pin(codec, "Headset Mic");
+		snd_soc_dapm_disable_pin(codec, "Call Mic");
+		break;
+	case NEO_GSM_CALL_AUDIO_BLUETOOTH:
+		snd_soc_dapm_disable_pin(codec, "Audio Out");
+		snd_soc_dapm_enable_pin(codec, "GSM Line Out");
+		snd_soc_dapm_enable_pin(codec, "GSM Line In");
+		snd_soc_dapm_disable_pin(codec, "Headset Mic");
+		snd_soc_dapm_disable_pin(codec, "Call Mic");
+		break;
+	case NEO_STEREO_TO_SPEAKERS:
+		snd_soc_dapm_enable_pin(codec, "Audio Out");
+		snd_soc_dapm_disable_pin(codec, "GSM Line Out");
+		snd_soc_dapm_disable_pin(codec, "GSM Line In");
+		snd_soc_dapm_disable_pin(codec, "Headset Mic");
+		snd_soc_dapm_disable_pin(codec, "Call Mic");
+		break;
+	case NEO_STEREO_TO_HEADPHONES:
+		snd_soc_dapm_enable_pin(codec, "Audio Out");
+		snd_soc_dapm_disable_pin(codec, "GSM Line Out");
+		snd_soc_dapm_disable_pin(codec, "GSM Line In");
+		snd_soc_dapm_disable_pin(codec, "Headset Mic");
+		snd_soc_dapm_disable_pin(codec, "Call Mic");
+		break;
+	case NEO_CAPTURE_HANDSET:
+		snd_soc_dapm_disable_pin(codec, "Audio Out");
+		snd_soc_dapm_disable_pin(codec, "GSM Line Out");
+		snd_soc_dapm_disable_pin(codec, "GSM Line In");
+		snd_soc_dapm_disable_pin(codec, "Headset Mic");
+		snd_soc_dapm_enable_pin(codec, "Call Mic");
+		break;
+	case NEO_CAPTURE_HEADSET:
+		snd_soc_dapm_disable_pin(codec, "Audio Out");
+		snd_soc_dapm_disable_pin(codec, "GSM Line Out");
+		snd_soc_dapm_disable_pin(codec, "GSM Line In");
+		snd_soc_dapm_enable_pin(codec, "Headset Mic");
+		snd_soc_dapm_disable_pin(codec, "Call Mic");
+		break;
+	case NEO_CAPTURE_BLUETOOTH:
+		snd_soc_dapm_disable_pin(codec, "Audio Out");
+		snd_soc_dapm_disable_pin(codec, "GSM Line Out");
+		snd_soc_dapm_disable_pin(codec, "GSM Line In");
+		snd_soc_dapm_disable_pin(codec, "Headset Mic");
+		snd_soc_dapm_disable_pin(codec, "Call Mic");
+		break;
+	default:
+		snd_soc_dapm_disable_pin(codec, "Audio Out");
+		snd_soc_dapm_disable_pin(codec, "GSM Line Out");
+		snd_soc_dapm_disable_pin(codec, "GSM Line In");
+		snd_soc_dapm_disable_pin(codec, "Headset Mic");
+		snd_soc_dapm_disable_pin(codec, "Call Mic");
+	}
+
+	snd_soc_dapm_sync(codec);
+
+	return 0;
+}
+
+static int neo1973_set_scenario(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (neo1973_scenario == ucontrol->value.integer.value[0])
+		return 0;
+
+	neo1973_scenario = ucontrol->value.integer.value[0];
+	set_scenario_endpoints(codec, neo1973_scenario);
+	return 1;
+}
+
+static u8 lm4857_regs[4] = {0x00, 0x40, 0x80, 0xC0};
+
+static void lm4857_write_regs(void)
+{
+	pr_debug("Entered %s\n", __func__);
+
+	if (i2c_master_send(i2c, lm4857_regs, 4) != 4)
+		printk(KERN_ERR "lm4857: i2c write failed\n");
+}
+
+static int lm4857_get_reg(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct soc_mixer_control *mc =
+		(struct soc_mixer_control *)kcontrol->private_value;
+	int reg = mc->reg;
+	int shift = mc->shift;
+	int mask = mc->max;
+
+	pr_debug("Entered %s\n", __func__);
+
+	ucontrol->value.integer.value[0] = (lm4857_regs[reg] >> shift) & mask;
+	return 0;
+}
+
+static int lm4857_set_reg(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct soc_mixer_control *mc =
+		(struct soc_mixer_control *)kcontrol->private_value;
+	int reg = mc->reg;
+	int shift = mc->shift;
+	int mask = mc->max;
+
+	if (((lm4857_regs[reg] >> shift) & mask) ==
+		ucontrol->value.integer.value[0])
+		return 0;
+
+	lm4857_regs[reg] &= ~(mask << shift);
+	lm4857_regs[reg] |= ucontrol->value.integer.value[0] << shift;
+	lm4857_write_regs();
+	return 1;
+}
+
+static int lm4857_get_mode(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	u8 value = lm4857_regs[LM4857_CTRL] & 0x0F;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (value)
+		value -= 5;
+
+	ucontrol->value.integer.value[0] = value;
+	return 0;
+}
+
+static int lm4857_set_mode(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	u8 value = ucontrol->value.integer.value[0];
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (value)
+		value += 5;
+
+	if ((lm4857_regs[LM4857_CTRL] & 0x0F) == value)
+		return 0;
+
+	lm4857_regs[LM4857_CTRL] &= 0xF0;
+	lm4857_regs[LM4857_CTRL] |= value;
+	lm4857_write_regs();
+	return 1;
+}
+
+static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = {
+	SND_SOC_DAPM_LINE("Audio Out", NULL),
+	SND_SOC_DAPM_LINE("GSM Line Out", NULL),
+	SND_SOC_DAPM_LINE("GSM Line In", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_MIC("Call Mic", NULL),
+};
+
+
+static const struct snd_soc_dapm_route dapm_routes[] = {
+
+	/* Connections to the lm4857 amp */
+	{"Audio Out", NULL, "LOUT1"},
+	{"Audio Out", NULL, "ROUT1"},
+
+	/* Connections to the GSM Module */
+	{"GSM Line Out", NULL, "MONO1"},
+	{"GSM Line Out", NULL, "MONO2"},
+	{"RXP", NULL, "GSM Line In"},
+	{"RXN", NULL, "GSM Line In"},
+
+	/* Connections to Headset */
+	{"MIC1", NULL, "Mic Bias"},
+	{"Mic Bias", NULL, "Headset Mic"},
+
+	/* Call Mic */
+	{"MIC2", NULL, "Mic Bias"},
+	{"MIC2N", NULL, "Mic Bias"},
+	{"Mic Bias", NULL, "Call Mic"},
+
+	/* Connect the ALC pins */
+	{"ACIN", NULL, "ACOP"},
+};
+
+static const char *lm4857_mode[] = {
+	"Off",
+	"Call Speaker",
+	"Stereo Speakers",
+	"Stereo Speakers + Headphones",
+	"Headphones"
+};
+
+static const struct soc_enum lm4857_mode_enum[] = {
+	SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(lm4857_mode), lm4857_mode),
+};
+
+static const char *neo_scenarios[] = {
+	"Off",
+	"GSM Handset",
+	"GSM Headset",
+	"GSM Bluetooth",
+	"Speakers",
+	"Headphones",
+	"Capture Handset",
+	"Capture Headset",
+	"Capture Bluetooth"
+};
+
+static const struct soc_enum neo_scenario_enum[] = {
+	SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(neo_scenarios), neo_scenarios),
+};
+
+static const DECLARE_TLV_DB_SCALE(stereo_tlv, -4050, 150, 0);
+static const DECLARE_TLV_DB_SCALE(mono_tlv, -3450, 150, 0);
+
+static const struct snd_kcontrol_new wm8753_neo1973_controls[] = {
+	SOC_SINGLE_EXT_TLV("Amp Left Playback Volume", LM4857_LVOL, 0, 31, 0,
+		lm4857_get_reg, lm4857_set_reg, stereo_tlv),
+	SOC_SINGLE_EXT_TLV("Amp Right Playback Volume", LM4857_RVOL, 0, 31, 0,
+		lm4857_get_reg, lm4857_set_reg, stereo_tlv),
+	SOC_SINGLE_EXT_TLV("Amp Mono Playback Volume", LM4857_MVOL, 0, 31, 0,
+		lm4857_get_reg, lm4857_set_reg, mono_tlv),
+	SOC_ENUM_EXT("Amp Mode", lm4857_mode_enum[0],
+		lm4857_get_mode, lm4857_set_mode),
+	SOC_ENUM_EXT("Neo Mode", neo_scenario_enum[0],
+		neo1973_get_scenario, neo1973_set_scenario),
+	SOC_SINGLE_EXT("Amp Spk 3D Playback Switch", LM4857_LVOL, 5, 1, 0,
+		lm4857_get_reg, lm4857_set_reg),
+	SOC_SINGLE_EXT("Amp HP 3d Playback Switch", LM4857_RVOL, 5, 1, 0,
+		lm4857_get_reg, lm4857_set_reg),
+	SOC_SINGLE_EXT("Amp Fast Wakeup Playback Switch", LM4857_CTRL, 5, 1, 0,
+		lm4857_get_reg, lm4857_set_reg),
+	SOC_SINGLE_EXT("Amp Earpiece 6dB Playback Switch", LM4857_CTRL, 4, 1, 0,
+		lm4857_get_reg, lm4857_set_reg),
+};
+
+/*
+ * This is an example machine initialisation for a wm8753 connected to a
+ * neo1973 II. It is missing logic to detect hp/mic insertions and logic
+ * to re-route the audio in such an event.
+ */
+static int neo1973_wm8753_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	int err;
+
+	pr_debug("Entered %s\n", __func__);
+
+	/* set up NC codec pins */
+	snd_soc_dapm_nc_pin(codec, "LOUT2");
+	snd_soc_dapm_nc_pin(codec, "ROUT2");
+	snd_soc_dapm_nc_pin(codec, "OUT3");
+	snd_soc_dapm_nc_pin(codec, "OUT4");
+	snd_soc_dapm_nc_pin(codec, "LINE1");
+	snd_soc_dapm_nc_pin(codec, "LINE2");
+
+	/* Add neo1973 specific widgets */
+	snd_soc_dapm_new_controls(codec, wm8753_dapm_widgets,
+				  ARRAY_SIZE(wm8753_dapm_widgets));
+
+	/* set endpoints to default mode */
+	set_scenario_endpoints(codec, NEO_AUDIO_OFF);
+
+	/* add neo1973 specific controls */
+	err = snd_soc_add_controls(codec, wm8753_neo1973_controls,
+				ARRAY_SIZE(8753_neo1973_controls));
+	if (err < 0)
+		return err;
+
+	/* set up neo1973 specific audio routes */
+	err = snd_soc_dapm_add_routes(codec, dapm_routes,
+				      ARRAY_SIZE(dapm_routes));
+
+	snd_soc_dapm_sync(codec);
+	return 0;
+}
+
+/*
+ * BT Codec DAI
+ */
+static struct snd_soc_dai bt_dai = {
+	.name = "bluetooth-dai",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 1,
+		.rates = SNDRV_PCM_RATE_8000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 1,
+		.rates = SNDRV_PCM_RATE_8000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE,},
+};
+
+static struct snd_soc_dai_link neo1973_dai[] = {
+{ /* Hifi Playback - for similatious use with voice below */
+	.name = "WM8753",
+	.stream_name = "WM8753 HiFi",
+	.platform_name = "samsung-audio",
+	.cpu_dai_name = "s3c24xx-i2s",
+	.codec_dai_name = "wm8753-hifi",
+	.codec_name = "wm8753-codec.0-0x1a",
+	.init = neo1973_wm8753_init,
+	.ops = &neo1973_hifi_ops,
+},
+{ /* Voice via BT */
+	.name = "Bluetooth",
+	.stream_name = "Voice",
+	.platform_name = "samsung-audio",
+	.cpu_dai_name = "bluetooth-dai",
+	.codec_dai_name = "wm8753-voice",
+	.codec_name = "wm8753-codec.0-0x1a",
+	.ops = &neo1973_voice_ops,
+},
+};
+
+static struct snd_soc_card neo1973 = {
+	.name = "neo1973",
+	.dai_link = neo1973_dai,
+	.num_links = ARRAY_SIZE(neo1973_dai),
+};
+
+static int lm4857_i2c_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	pr_debug("Entered %s\n", __func__);
+
+	i2c = client;
+
+	lm4857_write_regs();
+	return 0;
+}
+
+static int lm4857_i2c_remove(struct i2c_client *client)
+{
+	pr_debug("Entered %s\n", __func__);
+
+	i2c = NULL;
+
+	return 0;
+}
+
+static u8 lm4857_state;
+
+static int lm4857_suspend(struct i2c_client *dev, pm_message_t state)
+{
+	pr_debug("Entered %s\n", __func__);
+
+	dev_dbg(&dev->dev, "lm4857_suspend\n");
+	lm4857_state = lm4857_regs[LM4857_CTRL] & 0xf;
+	if (lm4857_state) {
+		lm4857_regs[LM4857_CTRL] &= 0xf0;
+		lm4857_write_regs();
+	}
+	return 0;
+}
+
+static int lm4857_resume(struct i2c_client *dev)
+{
+	pr_debug("Entered %s\n", __func__);
+
+	if (lm4857_state) {
+		lm4857_regs[LM4857_CTRL] |= (lm4857_state & 0x0f);
+		lm4857_write_regs();
+	}
+	return 0;
+}
+
+static void lm4857_shutdown(struct i2c_client *dev)
+{
+	pr_debug("Entered %s\n", __func__);
+
+	dev_dbg(&dev->dev, "lm4857_shutdown\n");
+	lm4857_regs[LM4857_CTRL] &= 0xf0;
+	lm4857_write_regs();
+}
+
+static const struct i2c_device_id lm4857_i2c_id[] = {
+	{ "neo1973_lm4857", 0 },
+	{ }
+};
+
+static struct i2c_driver lm4857_i2c_driver = {
+	.driver = {
+		.name = "LM4857 I2C Amp",
+		.owner = THIS_MODULE,
+	},
+	.suspend =        lm4857_suspend,
+	.resume	=         lm4857_resume,
+	.shutdown =       lm4857_shutdown,
+	.probe =          lm4857_i2c_probe,
+	.remove =         lm4857_i2c_remove,
+	.id_table =       lm4857_i2c_id,
+};
+
+static struct platform_device *neo1973_snd_device;
+
+static int __init neo1973_init(void)
+{
+	int ret;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (!machine_is_neo1973_gta01()) {
+		printk(KERN_INFO
+			"Only GTA01 hardware supported by ASoC driver\n");
+		return -ENODEV;
+	}
+
+	neo1973_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!neo1973_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(neo1973_snd_device, &neo1973);
+	ret = platform_device_add(neo1973_snd_device);
+
+	if (ret) {
+		platform_device_put(neo1973_snd_device);
+		return ret;
+	}
+
+	ret = i2c_add_driver(&lm4857_i2c_driver);
+
+	if (ret != 0)
+		platform_device_unregister(neo1973_snd_device);
+
+	return ret;
+}
+
+static void __exit neo1973_exit(void)
+{
+	pr_debug("Entered %s\n", __func__);
+
+	i2c_del_driver(&lm4857_i2c_driver);
+	platform_device_unregister(neo1973_snd_device);
+}
+
+module_init(neo1973_init);
+module_exit(neo1973_exit);
+
+/* Module information */
+MODULE_AUTHOR("Graeme Gregory, graeme@openmoko.org, www.openmoko.org");
+MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/samsung/pcm.c b/sound/soc/samsung/pcm.c
new file mode 100644
index 0000000..48d0b75
--- /dev/null
+++ b/sound/soc/samsung/pcm.c
@@ -0,0 +1,552 @@
+/* sound/soc/samsung/pcm.c
+ *
+ * ALSA SoC Audio Layer - S3C PCM-Controller driver
+ *
+ * Copyright (c) 2009 Samsung Electronics Co. Ltd
+ * Author: Jaswinder Singh <jassi.brar@samsung.com>
+ * based upon I2S drivers by Ben Dooks.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include <plat/audio.h>
+#include <plat/dma.h>
+
+#include "dma.h"
+#include "pcm.h"
+
+static struct s3c2410_dma_client s3c_pcm_dma_client_out = {
+	.name		= "PCM Stereo out"
+};
+
+static struct s3c2410_dma_client s3c_pcm_dma_client_in = {
+	.name		= "PCM Stereo in"
+};
+
+static struct s3c_dma_params s3c_pcm_stereo_out[] = {
+	[0] = {
+		.client		= &s3c_pcm_dma_client_out,
+		.dma_size	= 4,
+	},
+	[1] = {
+		.client		= &s3c_pcm_dma_client_out,
+		.dma_size	= 4,
+	},
+};
+
+static struct s3c_dma_params s3c_pcm_stereo_in[] = {
+	[0] = {
+		.client		= &s3c_pcm_dma_client_in,
+		.dma_size	= 4,
+	},
+	[1] = {
+		.client		= &s3c_pcm_dma_client_in,
+		.dma_size	= 4,
+	},
+};
+
+static struct s3c_pcm_info s3c_pcm[2];
+
+static void s3c_pcm_snd_txctrl(struct s3c_pcm_info *pcm, int on)
+{
+	void __iomem *regs = pcm->regs;
+	u32 ctl, clkctl;
+
+	clkctl = readl(regs + S3C_PCM_CLKCTL);
+	ctl = readl(regs + S3C_PCM_CTL);
+	ctl &= ~(S3C_PCM_CTL_TXDIPSTICK_MASK
+			 << S3C_PCM_CTL_TXDIPSTICK_SHIFT);
+
+	if (on) {
+		ctl |= S3C_PCM_CTL_TXDMA_EN;
+		ctl |= S3C_PCM_CTL_TXFIFO_EN;
+		ctl |= S3C_PCM_CTL_ENABLE;
+		ctl |= (0x4<<S3C_PCM_CTL_TXDIPSTICK_SHIFT);
+		clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
+	} else {
+		ctl &= ~S3C_PCM_CTL_TXDMA_EN;
+		ctl &= ~S3C_PCM_CTL_TXFIFO_EN;
+
+		if (!(ctl & S3C_PCM_CTL_RXFIFO_EN)) {
+			ctl &= ~S3C_PCM_CTL_ENABLE;
+			if (!pcm->idleclk)
+				clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
+		}
+	}
+
+	writel(clkctl, regs + S3C_PCM_CLKCTL);
+	writel(ctl, regs + S3C_PCM_CTL);
+}
+
+static void s3c_pcm_snd_rxctrl(struct s3c_pcm_info *pcm, int on)
+{
+	void __iomem *regs = pcm->regs;
+	u32 ctl, clkctl;
+
+	ctl = readl(regs + S3C_PCM_CTL);
+	clkctl = readl(regs + S3C_PCM_CLKCTL);
+	ctl &= ~(S3C_PCM_CTL_RXDIPSTICK_MASK
+			 << S3C_PCM_CTL_RXDIPSTICK_SHIFT);
+
+	if (on) {
+		ctl |= S3C_PCM_CTL_RXDMA_EN;
+		ctl |= S3C_PCM_CTL_RXFIFO_EN;
+		ctl |= S3C_PCM_CTL_ENABLE;
+		ctl |= (0x20<<S3C_PCM_CTL_RXDIPSTICK_SHIFT);
+		clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
+	} else {
+		ctl &= ~S3C_PCM_CTL_RXDMA_EN;
+		ctl &= ~S3C_PCM_CTL_RXFIFO_EN;
+
+		if (!(ctl & S3C_PCM_CTL_TXFIFO_EN)) {
+			ctl &= ~S3C_PCM_CTL_ENABLE;
+			if (!pcm->idleclk)
+				clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
+		}
+	}
+
+	writel(clkctl, regs + S3C_PCM_CLKCTL);
+	writel(ctl, regs + S3C_PCM_CTL);
+}
+
+static int s3c_pcm_trigger(struct snd_pcm_substream *substream, int cmd,
+			       struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	unsigned long flags;
+
+	dev_dbg(pcm->dev, "Entered %s\n", __func__);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		spin_lock_irqsave(&pcm->lock, flags);
+
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+			s3c_pcm_snd_rxctrl(pcm, 1);
+		else
+			s3c_pcm_snd_txctrl(pcm, 1);
+
+		spin_unlock_irqrestore(&pcm->lock, flags);
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		spin_lock_irqsave(&pcm->lock, flags);
+
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+			s3c_pcm_snd_rxctrl(pcm, 0);
+		else
+			s3c_pcm_snd_txctrl(pcm, 0);
+
+		spin_unlock_irqrestore(&pcm->lock, flags);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s3c_pcm_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *socdai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+	struct s3c_dma_params *dma_data;
+	void __iomem *regs = pcm->regs;
+	struct clk *clk;
+	int sclk_div, sync_div;
+	unsigned long flags;
+	u32 clkctl;
+
+	dev_dbg(pcm->dev, "Entered %s\n", __func__);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dma_data = pcm->dma_playback;
+	else
+		dma_data = pcm->dma_capture;
+
+	snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data);
+
+	/* Strictly check for sample size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&pcm->lock, flags);
+
+	/* Get hold of the PCMSOURCE_CLK */
+	clkctl = readl(regs + S3C_PCM_CLKCTL);
+	if (clkctl & S3C_PCM_CLKCTL_SERCLKSEL_PCLK)
+		clk = pcm->pclk;
+	else
+		clk = pcm->cclk;
+
+	/* Set the SCLK divider */
+	sclk_div = clk_get_rate(clk) / pcm->sclk_per_fs /
+					params_rate(params) / 2 - 1;
+
+	clkctl &= ~(S3C_PCM_CLKCTL_SCLKDIV_MASK
+			<< S3C_PCM_CLKCTL_SCLKDIV_SHIFT);
+	clkctl |= ((sclk_div & S3C_PCM_CLKCTL_SCLKDIV_MASK)
+			<< S3C_PCM_CLKCTL_SCLKDIV_SHIFT);
+
+	/* Set the SYNC divider */
+	sync_div = pcm->sclk_per_fs - 1;
+
+	clkctl &= ~(S3C_PCM_CLKCTL_SYNCDIV_MASK
+				<< S3C_PCM_CLKCTL_SYNCDIV_SHIFT);
+	clkctl |= ((sync_div & S3C_PCM_CLKCTL_SYNCDIV_MASK)
+				<< S3C_PCM_CLKCTL_SYNCDIV_SHIFT);
+
+	writel(clkctl, regs + S3C_PCM_CLKCTL);
+
+	spin_unlock_irqrestore(&pcm->lock, flags);
+
+	dev_dbg(pcm->dev, "PCMSOURCE_CLK-%lu SCLK=%ufs SCLK_DIV=%d SYNC_DIV=%d\n",
+				clk_get_rate(clk), pcm->sclk_per_fs,
+				sclk_div, sync_div);
+
+	return 0;
+}
+
+static int s3c_pcm_set_fmt(struct snd_soc_dai *cpu_dai,
+			       unsigned int fmt)
+{
+	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai);
+	void __iomem *regs = pcm->regs;
+	unsigned long flags;
+	int ret = 0;
+	u32 ctl;
+
+	dev_dbg(pcm->dev, "Entered %s\n", __func__);
+
+	spin_lock_irqsave(&pcm->lock, flags);
+
+	ctl = readl(regs + S3C_PCM_CTL);
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		/* Nothing to do, NB_NF by default */
+		break;
+	default:
+		dev_err(pcm->dev, "Unsupported clock inversion!\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		/* Nothing to do, Master by default */
+		break;
+	default:
+		dev_err(pcm->dev, "Unsupported master/slave format!\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_CLOCK_MASK) {
+	case SND_SOC_DAIFMT_CONT:
+		pcm->idleclk = 1;
+		break;
+	case SND_SOC_DAIFMT_GATED:
+		pcm->idleclk = 0;
+		break;
+	default:
+		dev_err(pcm->dev, "Invalid Clock gating request!\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_A:
+		ctl |= S3C_PCM_CTL_TXMSB_AFTER_FSYNC;
+		ctl |= S3C_PCM_CTL_RXMSB_AFTER_FSYNC;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		ctl &= ~S3C_PCM_CTL_TXMSB_AFTER_FSYNC;
+		ctl &= ~S3C_PCM_CTL_RXMSB_AFTER_FSYNC;
+		break;
+	default:
+		dev_err(pcm->dev, "Unsupported data format!\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	writel(ctl, regs + S3C_PCM_CTL);
+
+exit:
+	spin_unlock_irqrestore(&pcm->lock, flags);
+
+	return ret;
+}
+
+static int s3c_pcm_set_clkdiv(struct snd_soc_dai *cpu_dai,
+						int div_id, int div)
+{
+	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai);
+
+	switch (div_id) {
+	case S3C_PCM_SCLK_PER_FS:
+		pcm->sclk_per_fs = div;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s3c_pcm_set_sysclk(struct snd_soc_dai *cpu_dai,
+				  int clk_id, unsigned int freq, int dir)
+{
+	struct s3c_pcm_info *pcm = snd_soc_dai_get_drvdata(cpu_dai);
+	void __iomem *regs = pcm->regs;
+	u32 clkctl = readl(regs + S3C_PCM_CLKCTL);
+
+	switch (clk_id) {
+	case S3C_PCM_CLKSRC_PCLK:
+		clkctl |= S3C_PCM_CLKCTL_SERCLKSEL_PCLK;
+		break;
+
+	case S3C_PCM_CLKSRC_MUX:
+		clkctl &= ~S3C_PCM_CLKCTL_SERCLKSEL_PCLK;
+
+		if (clk_get_rate(pcm->cclk) != freq)
+			clk_set_rate(pcm->cclk, freq);
+
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	writel(clkctl, regs + S3C_PCM_CLKCTL);
+
+	return 0;
+}
+
+static struct snd_soc_dai_ops s3c_pcm_dai_ops = {
+	.set_sysclk	= s3c_pcm_set_sysclk,
+	.set_clkdiv	= s3c_pcm_set_clkdiv,
+	.trigger	= s3c_pcm_trigger,
+	.hw_params	= s3c_pcm_hw_params,
+	.set_fmt	= s3c_pcm_set_fmt,
+};
+
+#define S3C_PCM_RATES  SNDRV_PCM_RATE_8000_96000
+
+#define S3C_PCM_DAI_DECLARE			\
+	.symmetric_rates = 1,					\
+	.ops = &s3c_pcm_dai_ops,				\
+	.playback = {						\
+		.channels_min	= 2,				\
+		.channels_max	= 2,				\
+		.rates		= S3C_PCM_RATES,		\
+		.formats	= SNDRV_PCM_FMTBIT_S16_LE,	\
+	},							\
+	.capture = {						\
+		.channels_min	= 2,				\
+		.channels_max	= 2,				\
+		.rates		= S3C_PCM_RATES,		\
+		.formats	= SNDRV_PCM_FMTBIT_S16_LE,	\
+	}
+
+struct snd_soc_dai_driver s3c_pcm_dai[] = {
+	[0] = {
+		.name	= "samsung-pcm.0",
+		S3C_PCM_DAI_DECLARE,
+	},
+	[1] = {
+		.name	= "samsung-pcm.1",
+		S3C_PCM_DAI_DECLARE,
+	},
+};
+EXPORT_SYMBOL_GPL(s3c_pcm_dai);
+
+static __devinit int s3c_pcm_dev_probe(struct platform_device *pdev)
+{
+	struct s3c_pcm_info *pcm;
+	struct resource *mem_res, *dmatx_res, *dmarx_res;
+	struct s3c_audio_pdata *pcm_pdata;
+	int ret;
+
+	/* Check for valid device index */
+	if ((pdev->id < 0) || pdev->id >= ARRAY_SIZE(s3c_pcm)) {
+		dev_err(&pdev->dev, "id %d out of range\n", pdev->id);
+		return -EINVAL;
+	}
+
+	pcm_pdata = pdev->dev.platform_data;
+
+	/* Check for availability of necessary resource */
+	dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!dmatx_res) {
+		dev_err(&pdev->dev, "Unable to get PCM-TX dma resource\n");
+		return -ENXIO;
+	}
+
+	dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (!dmarx_res) {
+		dev_err(&pdev->dev, "Unable to get PCM-RX dma resource\n");
+		return -ENXIO;
+	}
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem_res) {
+		dev_err(&pdev->dev, "Unable to get register resource\n");
+		return -ENXIO;
+	}
+
+	if (pcm_pdata && pcm_pdata->cfg_gpio && pcm_pdata->cfg_gpio(pdev)) {
+		dev_err(&pdev->dev, "Unable to configure gpio\n");
+		return -EINVAL;
+	}
+
+	pcm = &s3c_pcm[pdev->id];
+	pcm->dev = &pdev->dev;
+
+	spin_lock_init(&pcm->lock);
+
+	/* Default is 128fs */
+	pcm->sclk_per_fs = 128;
+
+	pcm->cclk = clk_get(&pdev->dev, "audio-bus");
+	if (IS_ERR(pcm->cclk)) {
+		dev_err(&pdev->dev, "failed to get audio-bus\n");
+		ret = PTR_ERR(pcm->cclk);
+		goto err1;
+	}
+	clk_enable(pcm->cclk);
+
+	/* record our pcm structure for later use in the callbacks */
+	dev_set_drvdata(&pdev->dev, pcm);
+
+	if (!request_mem_region(mem_res->start,
+				resource_size(mem_res), "samsung-pcm")) {
+		dev_err(&pdev->dev, "Unable to request register region\n");
+		ret = -EBUSY;
+		goto err2;
+	}
+
+	pcm->regs = ioremap(mem_res->start, 0x100);
+	if (pcm->regs == NULL) {
+		dev_err(&pdev->dev, "cannot ioremap registers\n");
+		ret = -ENXIO;
+		goto err3;
+	}
+
+	pcm->pclk = clk_get(&pdev->dev, "pcm");
+	if (IS_ERR(pcm->pclk)) {
+		dev_err(&pdev->dev, "failed to get pcm_clock\n");
+		ret = -ENOENT;
+		goto err4;
+	}
+	clk_enable(pcm->pclk);
+
+	ret = snd_soc_register_dai(&pdev->dev, &s3c_pcm_dai[pdev->id]);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "failed to get pcm_clock\n");
+		goto err5;
+	}
+
+	s3c_pcm_stereo_in[pdev->id].dma_addr = mem_res->start
+							+ S3C_PCM_RXFIFO;
+	s3c_pcm_stereo_out[pdev->id].dma_addr = mem_res->start
+							+ S3C_PCM_TXFIFO;
+
+	s3c_pcm_stereo_in[pdev->id].channel = dmarx_res->start;
+	s3c_pcm_stereo_out[pdev->id].channel = dmatx_res->start;
+
+	pcm->dma_capture = &s3c_pcm_stereo_in[pdev->id];
+	pcm->dma_playback = &s3c_pcm_stereo_out[pdev->id];
+
+	return 0;
+
+err5:
+	clk_disable(pcm->pclk);
+	clk_put(pcm->pclk);
+err4:
+	iounmap(pcm->regs);
+err3:
+	release_mem_region(mem_res->start, resource_size(mem_res));
+err2:
+	clk_disable(pcm->cclk);
+	clk_put(pcm->cclk);
+err1:
+	return ret;
+}
+
+static __devexit int s3c_pcm_dev_remove(struct platform_device *pdev)
+{
+	struct s3c_pcm_info *pcm = &s3c_pcm[pdev->id];
+	struct resource *mem_res;
+
+	snd_soc_unregister_dai(&pdev->dev);
+
+	iounmap(pcm->regs);
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(mem_res->start, resource_size(mem_res));
+
+	clk_disable(pcm->cclk);
+	clk_disable(pcm->pclk);
+	clk_put(pcm->pclk);
+	clk_put(pcm->cclk);
+
+	return 0;
+}
+
+static struct platform_driver s3c_pcm_driver = {
+	.probe  = s3c_pcm_dev_probe,
+	.remove = s3c_pcm_dev_remove,
+	.driver = {
+		.name = "samsung-pcm",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init s3c_pcm_init(void)
+{
+	return platform_driver_register(&s3c_pcm_driver);
+}
+module_init(s3c_pcm_init);
+
+static void __exit s3c_pcm_exit(void)
+{
+	platform_driver_unregister(&s3c_pcm_driver);
+}
+module_exit(s3c_pcm_exit);
+
+/* Module information */
+MODULE_AUTHOR("Jaswinder Singh, <jassi.brar@samsung.com>");
+MODULE_DESCRIPTION("S3C PCM Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-pcm");
diff --git a/sound/soc/samsung/pcm.h b/sound/soc/samsung/pcm.h
new file mode 100644
index 0000000..03393dc
--- /dev/null
+++ b/sound/soc/samsung/pcm.h
@@ -0,0 +1,124 @@
+/*  sound/soc/samsung/pcm.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __S3C_PCM_H
+#define __S3C_PCM_H __FILE__
+
+/*Register Offsets */
+#define S3C_PCM_CTL	(0x00)
+#define S3C_PCM_CLKCTL	(0x04)
+#define S3C_PCM_TXFIFO	(0x08)
+#define S3C_PCM_RXFIFO	(0x0C)
+#define S3C_PCM_IRQCTL	(0x10)
+#define S3C_PCM_IRQSTAT	(0x14)
+#define S3C_PCM_FIFOSTAT	(0x18)
+#define S3C_PCM_CLRINT	(0x20)
+
+/* PCM_CTL Bit-Fields */
+#define S3C_PCM_CTL_TXDIPSTICK_MASK		(0x3f)
+#define S3C_PCM_CTL_TXDIPSTICK_SHIFT	(13)
+#define S3C_PCM_CTL_RXDIPSTICK_MASK		(0x3f)
+#define S3C_PCM_CTL_RXDIPSTICK_SHIFT	(7)
+#define S3C_PCM_CTL_TXDMA_EN		(0x1<<6)
+#define S3C_PCM_CTL_RXDMA_EN		(0x1<<5)
+#define S3C_PCM_CTL_TXMSB_AFTER_FSYNC	(0x1<<4)
+#define S3C_PCM_CTL_RXMSB_AFTER_FSYNC	(0x1<<3)
+#define S3C_PCM_CTL_TXFIFO_EN		(0x1<<2)
+#define S3C_PCM_CTL_RXFIFO_EN		(0x1<<1)
+#define S3C_PCM_CTL_ENABLE			(0x1<<0)
+
+/* PCM_CLKCTL Bit-Fields */
+#define S3C_PCM_CLKCTL_SERCLK_EN		(0x1<<19)
+#define S3C_PCM_CLKCTL_SERCLKSEL_PCLK	(0x1<<18)
+#define S3C_PCM_CLKCTL_SCLKDIV_MASK		(0x1ff)
+#define S3C_PCM_CLKCTL_SYNCDIV_MASK		(0x1ff)
+#define S3C_PCM_CLKCTL_SCLKDIV_SHIFT	(9)
+#define S3C_PCM_CLKCTL_SYNCDIV_SHIFT	(0)
+
+/* PCM_TXFIFO Bit-Fields */
+#define S3C_PCM_TXFIFO_DVALID	(0x1<<16)
+#define S3C_PCM_TXFIFO_DATA_MSK	(0xffff<<0)
+
+/* PCM_RXFIFO Bit-Fields */
+#define S3C_PCM_RXFIFO_DVALID	(0x1<<16)
+#define S3C_PCM_RXFIFO_DATA_MSK	(0xffff<<0)
+
+/* PCM_IRQCTL Bit-Fields */
+#define S3C_PCM_IRQCTL_IRQEN		(0x1<<14)
+#define S3C_PCM_IRQCTL_WRDEN		(0x1<<12)
+#define S3C_PCM_IRQCTL_TXEMPTYEN		(0x1<<11)
+#define S3C_PCM_IRQCTL_TXALMSTEMPTYEN	(0x1<<10)
+#define S3C_PCM_IRQCTL_TXFULLEN		(0x1<<9)
+#define S3C_PCM_IRQCTL_TXALMSTFULLEN	(0x1<<8)
+#define S3C_PCM_IRQCTL_TXSTARVEN		(0x1<<7)
+#define S3C_PCM_IRQCTL_TXERROVRFLEN		(0x1<<6)
+#define S3C_PCM_IRQCTL_RXEMPTEN		(0x1<<5)
+#define S3C_PCM_IRQCTL_RXALMSTEMPTEN	(0x1<<4)
+#define S3C_PCM_IRQCTL_RXFULLEN		(0x1<<3)
+#define S3C_PCM_IRQCTL_RXALMSTFULLEN	(0x1<<2)
+#define S3C_PCM_IRQCTL_RXSTARVEN		(0x1<<1)
+#define S3C_PCM_IRQCTL_RXERROVRFLEN		(0x1<<0)
+
+/* PCM_IRQSTAT Bit-Fields */
+#define S3C_PCM_IRQSTAT_IRQPND		(0x1<<13)
+#define S3C_PCM_IRQSTAT_WRD_XFER		(0x1<<12)
+#define S3C_PCM_IRQSTAT_TXEMPTY		(0x1<<11)
+#define S3C_PCM_IRQSTAT_TXALMSTEMPTY	(0x1<<10)
+#define S3C_PCM_IRQSTAT_TXFULL		(0x1<<9)
+#define S3C_PCM_IRQSTAT_TXALMSTFULL		(0x1<<8)
+#define S3C_PCM_IRQSTAT_TXSTARV		(0x1<<7)
+#define S3C_PCM_IRQSTAT_TXERROVRFL		(0x1<<6)
+#define S3C_PCM_IRQSTAT_RXEMPT		(0x1<<5)
+#define S3C_PCM_IRQSTAT_RXALMSTEMPT		(0x1<<4)
+#define S3C_PCM_IRQSTAT_RXFULL		(0x1<<3)
+#define S3C_PCM_IRQSTAT_RXALMSTFULL		(0x1<<2)
+#define S3C_PCM_IRQSTAT_RXSTARV		(0x1<<1)
+#define S3C_PCM_IRQSTAT_RXERROVRFL		(0x1<<0)
+
+/* PCM_FIFOSTAT Bit-Fields */
+#define S3C_PCM_FIFOSTAT_TXCNT_MSK		(0x3f<<14)
+#define S3C_PCM_FIFOSTAT_TXFIFOEMPTY	(0x1<<13)
+#define S3C_PCM_FIFOSTAT_TXFIFOALMSTEMPTY	(0x1<<12)
+#define S3C_PCM_FIFOSTAT_TXFIFOFULL		(0x1<<11)
+#define S3C_PCM_FIFOSTAT_TXFIFOALMSTFULL	(0x1<<10)
+#define S3C_PCM_FIFOSTAT_RXCNT_MSK		(0x3f<<4)
+#define S3C_PCM_FIFOSTAT_RXFIFOEMPTY	(0x1<<3)
+#define S3C_PCM_FIFOSTAT_RXFIFOALMSTEMPTY	(0x1<<2)
+#define S3C_PCM_FIFOSTAT_RXFIFOFULL		(0x1<<1)
+#define S3C_PCM_FIFOSTAT_RXFIFOALMSTFULL	(0x1<<0)
+
+#define S3C_PCM_CLKSRC_PCLK	0
+#define S3C_PCM_CLKSRC_MUX	1
+
+#define S3C_PCM_SCLK_PER_FS	0
+
+/**
+ * struct s3c_pcm_info - S3C PCM Controller information
+ * @dev: The parent device passed to use from the probe.
+ * @regs: The pointer to the device register block.
+ * @dma_playback: DMA information for playback channel.
+ * @dma_capture: DMA information for capture channel.
+ */
+struct s3c_pcm_info {
+	spinlock_t lock;
+	struct device	*dev;
+	void __iomem	*regs;
+
+	unsigned int sclk_per_fs;
+
+	/* Whether to keep PCMSCLK enabled even when idle(no active xfer) */
+	unsigned int idleclk;
+
+	struct clk	*pclk;
+	struct clk	*cclk;
+
+	struct s3c_dma_params	*dma_playback;
+	struct s3c_dma_params	*dma_capture;
+};
+
+#endif /* __S3C_PCM_H */
diff --git a/sound/soc/samsung/regs-i2s-v2.h b/sound/soc/samsung/regs-i2s-v2.h
new file mode 100644
index 0000000..5e5e568
--- /dev/null
+++ b/sound/soc/samsung/regs-i2s-v2.h
@@ -0,0 +1,115 @@
+/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h
+ *
+ * Copyright 2007 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2412 IIS register definition
+*/
+
+#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H
+#define __ASM_ARCH_REGS_S3C2412_IIS_H
+
+#define S3C2412_IISCON			(0x00)
+#define S3C2412_IISMOD			(0x04)
+#define S3C2412_IISFIC			(0x08)
+#define S3C2412_IISPSR			(0x0C)
+#define S3C2412_IISTXD			(0x10)
+#define S3C2412_IISRXD			(0x14)
+
+#define S5PC1XX_IISFICS		0x18
+#define S5PC1XX_IISTXDS		0x1C
+
+#define S5PC1XX_IISCON_SW_RST		(1 << 31)
+#define S5PC1XX_IISCON_FRXOFSTATUS	(1 << 26)
+#define S5PC1XX_IISCON_FRXORINTEN	(1 << 25)
+#define S5PC1XX_IISCON_FTXSURSTAT	(1 << 24)
+#define S5PC1XX_IISCON_FTXSURINTEN	(1 << 23)
+#define S5PC1XX_IISCON_TXSDMAPAUSE	(1 << 20)
+#define S5PC1XX_IISCON_TXSDMACTIVE	(1 << 18)
+
+#define S3C64XX_IISCON_FTXURSTATUS	(1 << 17)
+#define S3C64XX_IISCON_FTXURINTEN	(1 << 16)
+#define S3C64XX_IISCON_TXFIFO2_EMPTY	(1 << 15)
+#define S3C64XX_IISCON_TXFIFO1_EMPTY	(1 << 14)
+#define S3C64XX_IISCON_TXFIFO2_FULL	(1 << 13)
+#define S3C64XX_IISCON_TXFIFO1_FULL	(1 << 12)
+
+#define S3C2412_IISCON_LRINDEX		(1 << 11)
+#define S3C2412_IISCON_TXFIFO_EMPTY	(1 << 10)
+#define S3C2412_IISCON_RXFIFO_EMPTY	(1 << 9)
+#define S3C2412_IISCON_TXFIFO_FULL	(1 << 8)
+#define S3C2412_IISCON_RXFIFO_FULL	(1 << 7)
+#define S3C2412_IISCON_TXDMA_PAUSE	(1 << 6)
+#define S3C2412_IISCON_RXDMA_PAUSE	(1 << 5)
+#define S3C2412_IISCON_TXCH_PAUSE	(1 << 4)
+#define S3C2412_IISCON_RXCH_PAUSE	(1 << 3)
+#define S3C2412_IISCON_TXDMA_ACTIVE	(1 << 2)
+#define S3C2412_IISCON_RXDMA_ACTIVE	(1 << 1)
+#define S3C2412_IISCON_IIS_ACTIVE	(1 << 0)
+
+#define S5PC1XX_IISMOD_OPCLK_CDCLK_OUT	(0 << 30)
+#define S5PC1XX_IISMOD_OPCLK_CDCLK_IN	(1 << 30)
+#define S5PC1XX_IISMOD_OPCLK_BCLK_OUT	(2 << 30)
+#define S5PC1XX_IISMOD_OPCLK_PCLK	(3 << 30)
+#define S5PC1XX_IISMOD_OPCLK_MASK	(3 << 30)
+#define S5PC1XX_IISMOD_TXS_IDMA		(1 << 28) /* Sec_TXFIFO use I-DMA */
+#define S5PC1XX_IISMOD_BLCS_MASK	0x3
+#define S5PC1XX_IISMOD_BLCS_SHIFT	26
+#define S5PC1XX_IISMOD_BLCP_MASK	0x3
+#define S5PC1XX_IISMOD_BLCP_SHIFT	24
+
+#define S3C64XX_IISMOD_C2DD_HHALF	(1 << 21) /* Discard Higher-half */
+#define S3C64XX_IISMOD_C2DD_LHALF	(1 << 20) /* Discard Lower-half */
+#define S3C64XX_IISMOD_C1DD_HHALF	(1 << 19)
+#define S3C64XX_IISMOD_C1DD_LHALF	(1 << 18)
+#define S3C64XX_IISMOD_DC2_EN		(1 << 17)
+#define S3C64XX_IISMOD_DC1_EN		(1 << 16)
+#define S3C64XX_IISMOD_BLC_16BIT	(0 << 13)
+#define S3C64XX_IISMOD_BLC_8BIT		(1 << 13)
+#define S3C64XX_IISMOD_BLC_24BIT	(2 << 13)
+#define S3C64XX_IISMOD_BLC_MASK		(3 << 13)
+
+#define S3C2412_IISMOD_IMS_SYSMUX	(1 << 10)
+#define S3C2412_IISMOD_SLAVE		(1 << 11)
+#define S3C2412_IISMOD_MODE_TXONLY	(0 << 8)
+#define S3C2412_IISMOD_MODE_RXONLY	(1 << 8)
+#define S3C2412_IISMOD_MODE_TXRX	(2 << 8)
+#define S3C2412_IISMOD_MODE_MASK	(3 << 8)
+#define S3C2412_IISMOD_LR_LLOW		(0 << 7)
+#define S3C2412_IISMOD_LR_RLOW		(1 << 7)
+#define S3C2412_IISMOD_SDF_IIS		(0 << 5)
+#define S3C2412_IISMOD_SDF_MSB		(1 << 5)
+#define S3C2412_IISMOD_SDF_LSB		(2 << 5)
+#define S3C2412_IISMOD_SDF_MASK		(3 << 5)
+#define S3C2412_IISMOD_RCLK_256FS	(0 << 3)
+#define S3C2412_IISMOD_RCLK_512FS	(1 << 3)
+#define S3C2412_IISMOD_RCLK_384FS	(2 << 3)
+#define S3C2412_IISMOD_RCLK_768FS	(3 << 3)
+#define S3C2412_IISMOD_RCLK_MASK 	(3 << 3)
+#define S3C2412_IISMOD_BCLK_32FS	(0 << 1)
+#define S3C2412_IISMOD_BCLK_48FS	(1 << 1)
+#define S3C2412_IISMOD_BCLK_16FS	(2 << 1)
+#define S3C2412_IISMOD_BCLK_24FS	(3 << 1)
+#define S3C2412_IISMOD_BCLK_MASK	(3 << 1)
+#define S3C2412_IISMOD_8BIT		(1 << 0)
+
+#define S3C64XX_IISMOD_CDCLKCON		(1 << 12)
+
+#define S3C2412_IISPSR_PSREN		(1 << 15)
+
+#define S3C64XX_IISFIC_TX2COUNT(x)	(((x) >>  24) & 0xf)
+#define S3C64XX_IISFIC_TX1COUNT(x)	(((x) >>  16) & 0xf)
+
+#define S3C2412_IISFIC_TXFLUSH		(1 << 15)
+#define S3C2412_IISFIC_RXFLUSH		(1 << 7)
+#define S3C2412_IISFIC_TXCOUNT(x)	(((x) >>  8) & 0xf)
+#define S3C2412_IISFIC_RXCOUNT(x)	(((x) >>  0) & 0xf)
+
+#define S5PC1XX_IISFICS_TXFLUSH		(1 << 15)
+#define S5PC1XX_IISFICS_TXCOUNT(x)	(((x) >>  8) & 0x7f)
+
+#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */
diff --git a/sound/soc/samsung/rx1950_uda1380.c b/sound/soc/samsung/rx1950_uda1380.c
new file mode 100644
index 0000000..07197ee
--- /dev/null
+++ b/sound/soc/samsung/rx1950_uda1380.c
@@ -0,0 +1,333 @@
+/*
+ * rx1950.c  --  ALSA Soc Audio Layer
+ *
+ * Copyright (c) 2010 Vasily Khoruzhick <anarsoul@gmail.com>
+ *
+ * Based on smdk2440.c and magician.c
+ *
+ * Authors: Graeme Gregory graeme.gregory@wolfsonmicro.com
+ *          Philipp Zabel <philipp.zabel@gmail.com>
+ *          Denis Grigoriev <dgreenday@gmail.com>
+ *          Vasily Khoruzhick <anarsoul@gmail.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/uda1380.h>
+#include <sound/jack.h>
+
+#include <plat/regs-iis.h>
+
+#include <mach/regs-clock.h>
+
+#include <asm/mach-types.h>
+
+#include "dma.h"
+#include "s3c24xx-i2s.h"
+#include "../codecs/uda1380.h"
+
+static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd);
+static int rx1950_startup(struct snd_pcm_substream *substream);
+static int rx1950_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params);
+static int rx1950_spk_power(struct snd_soc_dapm_widget *w,
+				struct snd_kcontrol *kcontrol, int event);
+
+static unsigned int rates[] = {
+	16000,
+	44100,
+	48000,
+	88200,
+};
+
+static struct snd_pcm_hw_constraint_list hw_rates = {
+	.count = ARRAY_SIZE(rates),
+	.list = rates,
+	.mask = 0,
+};
+
+static struct snd_soc_jack hp_jack;
+
+static struct snd_soc_jack_pin hp_jack_pins[] = {
+	{
+		.pin	= "Headphone Jack",
+		.mask	= SND_JACK_HEADPHONE,
+	},
+	{
+		.pin	= "Speaker",
+		.mask	= SND_JACK_HEADPHONE,
+		.invert	= 1,
+	},
+};
+
+static struct snd_soc_jack_gpio hp_jack_gpios[] = {
+	[0] = {
+		.gpio			= S3C2410_GPG(12),
+		.name			= "hp-gpio",
+		.report			= SND_JACK_HEADPHONE,
+		.invert			= 1,
+		.debounce_time		= 200,
+	},
+};
+
+static struct snd_soc_ops rx1950_ops = {
+	.startup	= rx1950_startup,
+	.hw_params	= rx1950_hw_params,
+};
+
+/* s3c24xx digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link rx1950_uda1380_dai[] = {
+	{
+		.name		= "uda1380",
+		.stream_name	= "UDA1380 Duplex",
+		.cpu_dai_name	= "s3c24xx-iis",
+		.codec_dai_name	= "uda1380-hifi",
+		.init		= rx1950_uda1380_init,
+		.platform_name	= "samsung-audio",
+		.codec_name	= "uda1380-codec.0-001a",
+		.ops		= &rx1950_ops,
+	},
+};
+
+static struct snd_soc_card rx1950_asoc = {
+	.name = "rx1950",
+	.dai_link = rx1950_uda1380_dai,
+	.num_links = ARRAY_SIZE(rx1950_uda1380_dai),
+};
+
+/* rx1950 machine dapm widgets */
+static const struct snd_soc_dapm_widget uda1380_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_MIC("Mic Jack", NULL),
+	SND_SOC_DAPM_SPK("Speaker", rx1950_spk_power),
+};
+
+/* rx1950 machine audio_map */
+static const struct snd_soc_dapm_route audio_map[] = {
+	/* headphone connected to VOUTLHP, VOUTRHP */
+	{"Headphone Jack", NULL, "VOUTLHP"},
+	{"Headphone Jack", NULL, "VOUTRHP"},
+
+	/* ext speaker connected to VOUTL, VOUTR  */
+	{"Speaker", NULL, "VOUTL"},
+	{"Speaker", NULL, "VOUTR"},
+
+	/* mic is connected to VINM */
+	{"VINM", NULL, "Mic Jack"},
+};
+
+static struct platform_device *s3c24xx_snd_device;
+static struct clk *xtal;
+
+static int rx1950_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	runtime->hw.rate_min = hw_rates.list[0];
+	runtime->hw.rate_max = hw_rates.list[hw_rates.count - 1];
+	runtime->hw.rates = SNDRV_PCM_RATE_KNOT;
+
+	return snd_pcm_hw_constraint_list(runtime, 0,
+					SNDRV_PCM_HW_PARAM_RATE,
+					&hw_rates);
+}
+
+static int rx1950_spk_power(struct snd_soc_dapm_widget *w,
+				struct snd_kcontrol *kcontrol, int event)
+{
+	if (SND_SOC_DAPM_EVENT_ON(event))
+		gpio_set_value(S3C2410_GPA(1), 1);
+	else
+		gpio_set_value(S3C2410_GPA(1), 0);
+
+	return 0;
+}
+
+static int rx1950_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	int div;
+	int ret;
+	unsigned int rate = params_rate(params);
+	int clk_source, fs_mode;
+
+	switch (rate) {
+	case 16000:
+	case 48000:
+		clk_source = S3C24XX_CLKSRC_PCLK;
+		fs_mode = S3C2410_IISMOD_256FS;
+		div = s3c24xx_i2s_get_clockrate() / (256 * rate);
+		if (s3c24xx_i2s_get_clockrate() % (256 * rate) > (128 * rate))
+			div++;
+		break;
+	case 44100:
+	case 88200:
+		clk_source = S3C24XX_CLKSRC_MPLL;
+		fs_mode = S3C2410_IISMOD_256FS;
+		div = clk_get_rate(xtal) / (256 * rate);
+		if (clk_get_rate(xtal) % (256 * rate) > (128 * rate))
+			div++;
+		break;
+	default:
+		printk(KERN_ERR "%s: rate %d is not supported\n",
+			__func__, rate);
+		return -EINVAL;
+	}
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* select clock source */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source, rate,
+			SND_SOC_CLOCK_OUT);
+	if (ret < 0)
+		return ret;
+
+	/* set MCLK division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
+		S3C2410_IISMOD_384FS);
+	if (ret < 0)
+		return ret;
+
+	/* set BCLK division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK,
+		S3C2410_IISMOD_32FS);
+	if (ret < 0)
+		return ret;
+
+	/* set prescaler division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
+		S3C24XX_PRESCALE(div, div));
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	int err;
+
+	/* Add rx1950 specific widgets */
+	err = snd_soc_dapm_new_controls(codec, uda1380_dapm_widgets,
+				  ARRAY_SIZE(uda1380_dapm_widgets));
+
+	if (err)
+		return err;
+
+	/* Set up rx1950 specific audio path audio_mapnects */
+	err = snd_soc_dapm_add_routes(codec, audio_map,
+				      ARRAY_SIZE(audio_map));
+
+	if (err)
+		return err;
+
+	snd_soc_dapm_enable_pin(codec, "Headphone Jack");
+	snd_soc_dapm_enable_pin(codec, "Speaker");
+
+	snd_soc_dapm_sync(codec);
+
+	snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE,
+		&hp_jack);
+
+	snd_soc_jack_add_pins(&hp_jack, ARRAY_SIZE(hp_jack_pins),
+		hp_jack_pins);
+
+	snd_soc_jack_add_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
+		hp_jack_gpios);
+
+	return 0;
+}
+
+static int __init rx1950_init(void)
+{
+	int ret;
+
+	if (!machine_is_rx1950())
+		return -ENODEV;
+
+	/* configure some gpios */
+	ret = gpio_request(S3C2410_GPA(1), "speaker-power");
+	if (ret)
+		goto err_gpio;
+
+	ret = gpio_direction_output(S3C2410_GPA(1), 0);
+	if (ret)
+		goto err_gpio_conf;
+
+	s3c24xx_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!s3c24xx_snd_device) {
+		ret = -ENOMEM;
+		goto err_plat_alloc;
+	}
+
+	platform_set_drvdata(s3c24xx_snd_device, &rx1950_asoc);
+	ret = platform_device_add(s3c24xx_snd_device);
+
+	if (ret) {
+		platform_device_put(s3c24xx_snd_device);
+		goto err_plat_add;
+	}
+
+	xtal = clk_get(&s3c24xx_snd_device->dev, "xtal");
+
+	if (IS_ERR(xtal)) {
+		ret = PTR_ERR(xtal);
+		platform_device_unregister(s3c24xx_snd_device);
+		goto err_clk;
+	}
+
+	return 0;
+
+err_clk:
+err_plat_add:
+err_plat_alloc:
+err_gpio_conf:
+	gpio_free(S3C2410_GPA(1));
+
+err_gpio:
+	return ret;
+}
+
+static void __exit rx1950_exit(void)
+{
+	platform_device_unregister(s3c24xx_snd_device);
+	snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
+		hp_jack_gpios);
+	clk_put(xtal);
+	gpio_free(S3C2410_GPA(1));
+}
+
+module_init(rx1950_init);
+module_exit(rx1950_exit);
+
+/* Module information */
+MODULE_AUTHOR("Vasily Khoruzhick");
+MODULE_DESCRIPTION("ALSA SoC RX1950");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/samsung/s3c-i2s-v2.c b/sound/soc/samsung/s3c-i2s-v2.c
new file mode 100644
index 0000000..094f36e
--- /dev/null
+++ b/sound/soc/samsung/s3c-i2s-v2.c
@@ -0,0 +1,757 @@
+/* sound/soc/samsung/s3c-i2c-v2.c
+ *
+ * ALSA Soc Audio Layer - I2S core for newer Samsung SoCs.
+ *
+ * Copyright (c) 2006 Wolfson Microelectronics PLC.
+ *	Graeme Gregory graeme.gregory@wolfsonmicro.com
+ *	linux@wolfsonmicro.com
+ *
+ * Copyright (c) 2008, 2007, 2004-2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <mach/dma.h>
+
+#include "regs-i2s-v2.h"
+#include "s3c-i2s-v2.h"
+#include "dma.h"
+
+#undef S3C_IIS_V2_SUPPORTED
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) \
+	|| defined(CONFIG_CPU_S5PV210)
+#define S3C_IIS_V2_SUPPORTED
+#endif
+
+#ifdef CONFIG_PLAT_S3C64XX
+#define S3C_IIS_V2_SUPPORTED
+#endif
+
+#ifndef S3C_IIS_V2_SUPPORTED
+#error Unsupported CPU model
+#endif
+
+#define S3C2412_I2S_DEBUG_CON 0
+
+static inline struct s3c_i2sv2_info *to_info(struct snd_soc_dai *cpu_dai)
+{
+	return snd_soc_dai_get_drvdata(cpu_dai);
+}
+
+#define bit_set(v, b) (((v) & (b)) ? 1 : 0)
+
+#if S3C2412_I2S_DEBUG_CON
+static void dbg_showcon(const char *fn, u32 con)
+{
+	printk(KERN_DEBUG "%s: LRI=%d, TXFEMPT=%d, RXFEMPT=%d, TXFFULL=%d, RXFFULL=%d\n", fn,
+	       bit_set(con, S3C2412_IISCON_LRINDEX),
+	       bit_set(con, S3C2412_IISCON_TXFIFO_EMPTY),
+	       bit_set(con, S3C2412_IISCON_RXFIFO_EMPTY),
+	       bit_set(con, S3C2412_IISCON_TXFIFO_FULL),
+	       bit_set(con, S3C2412_IISCON_RXFIFO_FULL));
+
+	printk(KERN_DEBUG "%s: PAUSE: TXDMA=%d, RXDMA=%d, TXCH=%d, RXCH=%d\n",
+	       fn,
+	       bit_set(con, S3C2412_IISCON_TXDMA_PAUSE),
+	       bit_set(con, S3C2412_IISCON_RXDMA_PAUSE),
+	       bit_set(con, S3C2412_IISCON_TXCH_PAUSE),
+	       bit_set(con, S3C2412_IISCON_RXCH_PAUSE));
+	printk(KERN_DEBUG "%s: ACTIVE: TXDMA=%d, RXDMA=%d, IIS=%d\n", fn,
+	       bit_set(con, S3C2412_IISCON_TXDMA_ACTIVE),
+	       bit_set(con, S3C2412_IISCON_RXDMA_ACTIVE),
+	       bit_set(con, S3C2412_IISCON_IIS_ACTIVE));
+}
+#else
+static inline void dbg_showcon(const char *fn, u32 con)
+{
+}
+#endif
+
+
+/* Turn on or off the transmission path. */
+static void s3c2412_snd_txctrl(struct s3c_i2sv2_info *i2s, int on)
+{
+	void __iomem *regs = i2s->regs;
+	u32 fic, con, mod;
+
+	pr_debug("%s(%d)\n", __func__, on);
+
+	fic = readl(regs + S3C2412_IISFIC);
+	con = readl(regs + S3C2412_IISCON);
+	mod = readl(regs + S3C2412_IISMOD);
+
+	pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
+
+	if (on) {
+		con |= S3C2412_IISCON_TXDMA_ACTIVE | S3C2412_IISCON_IIS_ACTIVE;
+		con &= ~S3C2412_IISCON_TXDMA_PAUSE;
+		con &= ~S3C2412_IISCON_TXCH_PAUSE;
+
+		switch (mod & S3C2412_IISMOD_MODE_MASK) {
+		case S3C2412_IISMOD_MODE_TXONLY:
+		case S3C2412_IISMOD_MODE_TXRX:
+			/* do nothing, we are in the right mode */
+			break;
+
+		case S3C2412_IISMOD_MODE_RXONLY:
+			mod &= ~S3C2412_IISMOD_MODE_MASK;
+			mod |= S3C2412_IISMOD_MODE_TXRX;
+			break;
+
+		default:
+			dev_err(i2s->dev, "TXEN: Invalid MODE %x in IISMOD\n",
+				mod & S3C2412_IISMOD_MODE_MASK);
+			break;
+		}
+
+		writel(con, regs + S3C2412_IISCON);
+		writel(mod, regs + S3C2412_IISMOD);
+	} else {
+		/* Note, we do not have any indication that the FIFO problems
+		 * tha the S3C2410/2440 had apply here, so we should be able
+		 * to disable the DMA and TX without resetting the FIFOS.
+		 */
+
+		con |=  S3C2412_IISCON_TXDMA_PAUSE;
+		con |=  S3C2412_IISCON_TXCH_PAUSE;
+		con &= ~S3C2412_IISCON_TXDMA_ACTIVE;
+
+		switch (mod & S3C2412_IISMOD_MODE_MASK) {
+		case S3C2412_IISMOD_MODE_TXRX:
+			mod &= ~S3C2412_IISMOD_MODE_MASK;
+			mod |= S3C2412_IISMOD_MODE_RXONLY;
+			break;
+
+		case S3C2412_IISMOD_MODE_TXONLY:
+			mod &= ~S3C2412_IISMOD_MODE_MASK;
+			con &= ~S3C2412_IISCON_IIS_ACTIVE;
+			break;
+
+		default:
+			dev_err(i2s->dev, "TXDIS: Invalid MODE %x in IISMOD\n",
+				mod & S3C2412_IISMOD_MODE_MASK);
+			break;
+		}
+
+		writel(mod, regs + S3C2412_IISMOD);
+		writel(con, regs + S3C2412_IISCON);
+	}
+
+	fic = readl(regs + S3C2412_IISFIC);
+	dbg_showcon(__func__, con);
+	pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
+}
+
+static void s3c2412_snd_rxctrl(struct s3c_i2sv2_info *i2s, int on)
+{
+	void __iomem *regs = i2s->regs;
+	u32 fic, con, mod;
+
+	pr_debug("%s(%d)\n", __func__, on);
+
+	fic = readl(regs + S3C2412_IISFIC);
+	con = readl(regs + S3C2412_IISCON);
+	mod = readl(regs + S3C2412_IISMOD);
+
+	pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
+
+	if (on) {
+		con |= S3C2412_IISCON_RXDMA_ACTIVE | S3C2412_IISCON_IIS_ACTIVE;
+		con &= ~S3C2412_IISCON_RXDMA_PAUSE;
+		con &= ~S3C2412_IISCON_RXCH_PAUSE;
+
+		switch (mod & S3C2412_IISMOD_MODE_MASK) {
+		case S3C2412_IISMOD_MODE_TXRX:
+		case S3C2412_IISMOD_MODE_RXONLY:
+			/* do nothing, we are in the right mode */
+			break;
+
+		case S3C2412_IISMOD_MODE_TXONLY:
+			mod &= ~S3C2412_IISMOD_MODE_MASK;
+			mod |= S3C2412_IISMOD_MODE_TXRX;
+			break;
+
+		default:
+			dev_err(i2s->dev, "RXEN: Invalid MODE %x in IISMOD\n",
+				mod & S3C2412_IISMOD_MODE_MASK);
+		}
+
+		writel(mod, regs + S3C2412_IISMOD);
+		writel(con, regs + S3C2412_IISCON);
+	} else {
+		/* See txctrl notes on FIFOs. */
+
+		con &= ~S3C2412_IISCON_RXDMA_ACTIVE;
+		con |=  S3C2412_IISCON_RXDMA_PAUSE;
+		con |=  S3C2412_IISCON_RXCH_PAUSE;
+
+		switch (mod & S3C2412_IISMOD_MODE_MASK) {
+		case S3C2412_IISMOD_MODE_RXONLY:
+			con &= ~S3C2412_IISCON_IIS_ACTIVE;
+			mod &= ~S3C2412_IISMOD_MODE_MASK;
+			break;
+
+		case S3C2412_IISMOD_MODE_TXRX:
+			mod &= ~S3C2412_IISMOD_MODE_MASK;
+			mod |= S3C2412_IISMOD_MODE_TXONLY;
+			break;
+
+		default:
+			dev_err(i2s->dev, "RXDIS: Invalid MODE %x in IISMOD\n",
+				mod & S3C2412_IISMOD_MODE_MASK);
+		}
+
+		writel(con, regs + S3C2412_IISCON);
+		writel(mod, regs + S3C2412_IISMOD);
+	}
+
+	fic = readl(regs + S3C2412_IISFIC);
+	pr_debug("%s: IIS: CON=%x MOD=%x FIC=%x\n", __func__, con, mod, fic);
+}
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+/*
+ * Wait for the LR signal to allow synchronisation to the L/R clock
+ * from the codec. May only be needed for slave mode.
+ */
+static int s3c2412_snd_lrsync(struct s3c_i2sv2_info *i2s)
+{
+	u32 iiscon;
+	unsigned long loops = msecs_to_loops(5);
+
+	pr_debug("Entered %s\n", __func__);
+
+	while (--loops) {
+		iiscon = readl(i2s->regs + S3C2412_IISCON);
+		if (iiscon & S3C2412_IISCON_LRINDEX)
+			break;
+
+		cpu_relax();
+	}
+
+	if (!loops) {
+		printk(KERN_ERR "%s: timeout\n", __func__);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+/*
+ * Set S3C2412 I2S DAI format
+ */
+static int s3c2412_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
+			       unsigned int fmt)
+{
+	struct s3c_i2sv2_info *i2s = to_info(cpu_dai);
+	u32 iismod;
+
+	pr_debug("Entered %s\n", __func__);
+
+	iismod = readl(i2s->regs + S3C2412_IISMOD);
+	pr_debug("hw_params r: IISMOD: %x \n", iismod);
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		i2s->master = 0;
+		iismod |= S3C2412_IISMOD_SLAVE;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		i2s->master = 1;
+		iismod &= ~S3C2412_IISMOD_SLAVE;
+		break;
+	default:
+		pr_err("unknwon master/slave format\n");
+		return -EINVAL;
+	}
+
+	iismod &= ~S3C2412_IISMOD_SDF_MASK;
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_RIGHT_J:
+		iismod |= S3C2412_IISMOD_LR_RLOW;
+		iismod |= S3C2412_IISMOD_SDF_MSB;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		iismod |= S3C2412_IISMOD_LR_RLOW;
+		iismod |= S3C2412_IISMOD_SDF_LSB;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		iismod &= ~S3C2412_IISMOD_LR_RLOW;
+		iismod |= S3C2412_IISMOD_SDF_IIS;
+		break;
+	default:
+		pr_err("Unknown data format\n");
+		return -EINVAL;
+	}
+
+	writel(iismod, i2s->regs + S3C2412_IISMOD);
+	pr_debug("hw_params w: IISMOD: %x \n", iismod);
+	return 0;
+}
+
+static int s3c_i2sv2_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *dai)
+{
+	struct s3c_i2sv2_info *i2s = to_info(dai);
+	struct s3c_dma_params *dma_data;
+	u32 iismod;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dma_data = i2s->dma_playback;
+	else
+		dma_data = i2s->dma_capture;
+
+	snd_soc_dai_set_dma_data(dai, substream, dma_data);
+
+	/* Working copies of register */
+	iismod = readl(i2s->regs + S3C2412_IISMOD);
+	pr_debug("%s: r: IISMOD: %x\n", __func__, iismod);
+
+	iismod &= ~S3C64XX_IISMOD_BLC_MASK;
+	/* Sample size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S8:
+		iismod |= S3C64XX_IISMOD_BLC_8BIT;
+		break;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		iismod |= S3C64XX_IISMOD_BLC_24BIT;
+		break;
+	}
+
+	writel(iismod, i2s->regs + S3C2412_IISMOD);
+	pr_debug("%s: w: IISMOD: %x\n", __func__, iismod);
+
+	return 0;
+}
+
+static int s3c_i2sv2_set_sysclk(struct snd_soc_dai *cpu_dai,
+				  int clk_id, unsigned int freq, int dir)
+{
+	struct s3c_i2sv2_info *i2s = to_info(cpu_dai);
+	u32 iismod = readl(i2s->regs + S3C2412_IISMOD);
+
+	pr_debug("Entered %s\n", __func__);
+	pr_debug("%s r: IISMOD: %x\n", __func__, iismod);
+
+	switch (clk_id) {
+	case S3C_I2SV2_CLKSRC_PCLK:
+		iismod &= ~S3C2412_IISMOD_IMS_SYSMUX;
+		break;
+
+	case S3C_I2SV2_CLKSRC_AUDIOBUS:
+		iismod |= S3C2412_IISMOD_IMS_SYSMUX;
+		break;
+
+	case S3C_I2SV2_CLKSRC_CDCLK:
+		/* Error if controller doesn't have the CDCLKCON bit */
+		if (!(i2s->feature & S3C_FEATURE_CDCLKCON))
+			return -EINVAL;
+
+		switch (dir) {
+		case SND_SOC_CLOCK_IN:
+			iismod |= S3C64XX_IISMOD_CDCLKCON;
+			break;
+		case SND_SOC_CLOCK_OUT:
+			iismod &= ~S3C64XX_IISMOD_CDCLKCON;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	writel(iismod, i2s->regs + S3C2412_IISMOD);
+	pr_debug("%s w: IISMOD: %x\n", __func__, iismod);
+
+	return 0;
+}
+
+static int s3c2412_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+			       struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s3c_i2sv2_info *i2s = to_info(rtd->cpu_dai);
+	int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
+	unsigned long irqs;
+	int ret = 0;
+	struct s3c_dma_params *dma_data =
+		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+
+	pr_debug("Entered %s\n", __func__);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		/* On start, ensure that the FIFOs are cleared and reset. */
+
+		writel(capture ? S3C2412_IISFIC_RXFLUSH : S3C2412_IISFIC_TXFLUSH,
+		       i2s->regs + S3C2412_IISFIC);
+
+		/* clear again, just in case */
+		writel(0x0, i2s->regs + S3C2412_IISFIC);
+
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		if (!i2s->master) {
+			ret = s3c2412_snd_lrsync(i2s);
+			if (ret)
+				goto exit_err;
+		}
+
+		local_irq_save(irqs);
+
+		if (capture)
+			s3c2412_snd_rxctrl(i2s, 1);
+		else
+			s3c2412_snd_txctrl(i2s, 1);
+
+		local_irq_restore(irqs);
+
+		/*
+		 * Load the next buffer to DMA to meet the reqirement
+		 * of the auto reload mechanism of S3C24XX.
+		 * This call won't bother S3C64XX.
+		 */
+		s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
+
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		local_irq_save(irqs);
+
+		if (capture)
+			s3c2412_snd_rxctrl(i2s, 0);
+		else
+			s3c2412_snd_txctrl(i2s, 0);
+
+		local_irq_restore(irqs);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+exit_err:
+	return ret;
+}
+
+/*
+ * Set S3C2412 Clock dividers
+ */
+static int s3c2412_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai,
+				  int div_id, int div)
+{
+	struct s3c_i2sv2_info *i2s = to_info(cpu_dai);
+	u32 reg;
+
+	pr_debug("%s(%p, %d, %d)\n", __func__, cpu_dai, div_id, div);
+
+	switch (div_id) {
+	case S3C_I2SV2_DIV_BCLK:
+		switch (div) {
+		case 16:
+			div = S3C2412_IISMOD_BCLK_16FS;
+			break;
+
+		case 32:
+			div = S3C2412_IISMOD_BCLK_32FS;
+			break;
+
+		case 24:
+			div = S3C2412_IISMOD_BCLK_24FS;
+			break;
+
+		case 48:
+			div = S3C2412_IISMOD_BCLK_48FS;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+
+		reg = readl(i2s->regs + S3C2412_IISMOD);
+		reg &= ~S3C2412_IISMOD_BCLK_MASK;
+		writel(reg | div, i2s->regs + S3C2412_IISMOD);
+
+		pr_debug("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD));
+		break;
+
+	case S3C_I2SV2_DIV_RCLK:
+		switch (div) {
+		case 256:
+			div = S3C2412_IISMOD_RCLK_256FS;
+			break;
+
+		case 384:
+			div = S3C2412_IISMOD_RCLK_384FS;
+			break;
+
+		case 512:
+			div = S3C2412_IISMOD_RCLK_512FS;
+			break;
+
+		case 768:
+			div = S3C2412_IISMOD_RCLK_768FS;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+
+		reg = readl(i2s->regs + S3C2412_IISMOD);
+		reg &= ~S3C2412_IISMOD_RCLK_MASK;
+		writel(reg | div, i2s->regs + S3C2412_IISMOD);
+		pr_debug("%s: MOD=%08x\n", __func__, readl(i2s->regs + S3C2412_IISMOD));
+		break;
+
+	case S3C_I2SV2_DIV_PRESCALER:
+		if (div >= 0) {
+			writel((div << 8) | S3C2412_IISPSR_PSREN,
+			       i2s->regs + S3C2412_IISPSR);
+		} else {
+			writel(0x0, i2s->regs + S3C2412_IISPSR);
+		}
+		pr_debug("%s: PSR=%08x\n", __func__, readl(i2s->regs + S3C2412_IISPSR));
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static snd_pcm_sframes_t s3c2412_i2s_delay(struct snd_pcm_substream *substream,
+					   struct snd_soc_dai *dai)
+{
+	struct s3c_i2sv2_info *i2s = to_info(dai);
+	u32 reg = readl(i2s->regs + S3C2412_IISFIC);
+	snd_pcm_sframes_t delay;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		delay = S3C2412_IISFIC_TXCOUNT(reg);
+	else
+		delay = S3C2412_IISFIC_RXCOUNT(reg);
+
+	return delay;
+}
+
+struct clk *s3c_i2sv2_get_clock(struct snd_soc_dai *cpu_dai)
+{
+	struct s3c_i2sv2_info *i2s = to_info(cpu_dai);
+	u32 iismod = readl(i2s->regs + S3C2412_IISMOD);
+
+	if (iismod & S3C2412_IISMOD_IMS_SYSMUX)
+		return i2s->iis_cclk;
+	else
+		return i2s->iis_pclk;
+}
+EXPORT_SYMBOL_GPL(s3c_i2sv2_get_clock);
+
+/* default table of all avaialable root fs divisors */
+static unsigned int iis_fs_tab[] = { 256, 512, 384, 768 };
+
+int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
+			    unsigned int *fstab,
+			    unsigned int rate, struct clk *clk)
+{
+	unsigned long clkrate = clk_get_rate(clk);
+	unsigned int div;
+	unsigned int fsclk;
+	unsigned int actual;
+	unsigned int fs;
+	unsigned int fsdiv;
+	signed int deviation = 0;
+	unsigned int best_fs = 0;
+	unsigned int best_div = 0;
+	unsigned int best_rate = 0;
+	unsigned int best_deviation = INT_MAX;
+
+	pr_debug("Input clock rate %ldHz\n", clkrate);
+
+	if (fstab == NULL)
+		fstab = iis_fs_tab;
+
+	for (fs = 0; fs < ARRAY_SIZE(iis_fs_tab); fs++) {
+		fsdiv = iis_fs_tab[fs];
+
+		fsclk = clkrate / fsdiv;
+		div = fsclk / rate;
+
+		if ((fsclk % rate) > (rate / 2))
+			div++;
+
+		if (div <= 1)
+			continue;
+
+		actual = clkrate / (fsdiv * div);
+		deviation = actual - rate;
+
+		printk(KERN_DEBUG "%ufs: div %u => result %u, deviation %d\n",
+		       fsdiv, div, actual, deviation);
+
+		deviation = abs(deviation);
+
+		if (deviation < best_deviation) {
+			best_fs = fsdiv;
+			best_div = div;
+			best_rate = actual;
+			best_deviation = deviation;
+		}
+
+		if (deviation == 0)
+			break;
+	}
+
+	printk(KERN_DEBUG "best: fs=%u, div=%u, rate=%u\n",
+	       best_fs, best_div, best_rate);
+
+	info->fs_div = best_fs;
+	info->clk_div = best_div;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_i2sv2_iis_calc_rate);
+
+int s3c_i2sv2_probe(struct snd_soc_dai *dai,
+		    struct s3c_i2sv2_info *i2s,
+		    unsigned long base)
+{
+	struct device *dev = dai->dev;
+	unsigned int iismod;
+
+	i2s->dev = dev;
+
+	/* record our i2s structure for later use in the callbacks */
+	snd_soc_dai_set_drvdata(dai, i2s);
+
+	i2s->regs = ioremap(base, 0x100);
+	if (i2s->regs == NULL) {
+		dev_err(dev, "cannot ioremap registers\n");
+		return -ENXIO;
+	}
+
+	i2s->iis_pclk = clk_get(dev, "iis");
+	if (IS_ERR(i2s->iis_pclk)) {
+		dev_err(dev, "failed to get iis_clock\n");
+		iounmap(i2s->regs);
+		return -ENOENT;
+	}
+
+	clk_enable(i2s->iis_pclk);
+
+	/* Mark ourselves as in TXRX mode so we can run through our cleanup
+	 * process without warnings. */
+	iismod = readl(i2s->regs + S3C2412_IISMOD);
+	iismod |= S3C2412_IISMOD_MODE_TXRX;
+	writel(iismod, i2s->regs + S3C2412_IISMOD);
+	s3c2412_snd_txctrl(i2s, 0);
+	s3c2412_snd_rxctrl(i2s, 0);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_i2sv2_probe);
+
+#ifdef CONFIG_PM
+static int s3c2412_i2s_suspend(struct snd_soc_dai *dai)
+{
+	struct s3c_i2sv2_info *i2s = to_info(dai);
+	u32 iismod;
+
+	if (dai->active) {
+		i2s->suspend_iismod = readl(i2s->regs + S3C2412_IISMOD);
+		i2s->suspend_iiscon = readl(i2s->regs + S3C2412_IISCON);
+		i2s->suspend_iispsr = readl(i2s->regs + S3C2412_IISPSR);
+
+		/* some basic suspend checks */
+
+		iismod = readl(i2s->regs + S3C2412_IISMOD);
+
+		if (iismod & S3C2412_IISCON_RXDMA_ACTIVE)
+			pr_warning("%s: RXDMA active?\n", __func__);
+
+		if (iismod & S3C2412_IISCON_TXDMA_ACTIVE)
+			pr_warning("%s: TXDMA active?\n", __func__);
+
+		if (iismod & S3C2412_IISCON_IIS_ACTIVE)
+			pr_warning("%s: IIS active\n", __func__);
+	}
+
+	return 0;
+}
+
+static int s3c2412_i2s_resume(struct snd_soc_dai *dai)
+{
+	struct s3c_i2sv2_info *i2s = to_info(dai);
+
+	pr_info("dai_active %d, IISMOD %08x, IISCON %08x\n",
+		dai->active, i2s->suspend_iismod, i2s->suspend_iiscon);
+
+	if (dai->active) {
+		writel(i2s->suspend_iiscon, i2s->regs + S3C2412_IISCON);
+		writel(i2s->suspend_iismod, i2s->regs + S3C2412_IISMOD);
+		writel(i2s->suspend_iispsr, i2s->regs + S3C2412_IISPSR);
+
+		writel(S3C2412_IISFIC_RXFLUSH | S3C2412_IISFIC_TXFLUSH,
+		       i2s->regs + S3C2412_IISFIC);
+
+		ndelay(250);
+		writel(0x0, i2s->regs + S3C2412_IISFIC);
+	}
+
+	return 0;
+}
+#else
+#define s3c2412_i2s_suspend NULL
+#define s3c2412_i2s_resume  NULL
+#endif
+
+int s3c_i2sv2_register_dai(struct device *dev, int id,
+		struct snd_soc_dai_driver *drv)
+{
+	struct snd_soc_dai_ops *ops = drv->ops;
+
+	ops->trigger = s3c2412_i2s_trigger;
+	if (!ops->hw_params)
+		ops->hw_params = s3c_i2sv2_hw_params;
+	ops->set_fmt = s3c2412_i2s_set_fmt;
+	ops->set_clkdiv = s3c2412_i2s_set_clkdiv;
+	ops->set_sysclk = s3c_i2sv2_set_sysclk;
+
+	/* Allow overriding by (for example) IISv4 */
+	if (!ops->delay)
+		ops->delay = s3c2412_i2s_delay;
+
+	drv->suspend = s3c2412_i2s_suspend;
+	drv->resume = s3c2412_i2s_resume;
+
+	return snd_soc_register_dai(dev, drv);
+}
+EXPORT_SYMBOL_GPL(s3c_i2sv2_register_dai);
+
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/samsung/s3c-i2s-v2.h b/sound/soc/samsung/s3c-i2s-v2.h
new file mode 100644
index 0000000..f8297d9
--- /dev/null
+++ b/sound/soc/samsung/s3c-i2s-v2.h
@@ -0,0 +1,106 @@
+/* sound/soc/samsung/s3c-i2s-v2.h
+ *
+ * ALSA Soc Audio Layer - S3C_I2SV2 I2S driver
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+*/
+
+/* This code is the core support for the I2S block found in a number of
+ * Samsung SoC devices which is unofficially named I2S-V2. Currently the
+ * S3C2412 and the S3C64XX series use this block to provide 1 or 2 I2S
+ * channels via configurable GPIO.
+ */
+
+#ifndef __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H
+#define __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H __FILE__
+
+#define S3C_I2SV2_DIV_BCLK	(1)
+#define S3C_I2SV2_DIV_RCLK	(2)
+#define S3C_I2SV2_DIV_PRESCALER	(3)
+
+#define S3C_I2SV2_CLKSRC_PCLK		0
+#define S3C_I2SV2_CLKSRC_AUDIOBUS	1
+#define S3C_I2SV2_CLKSRC_CDCLK		2
+
+/* Set this flag for I2S controllers that have the bit IISMOD[12]
+ * bridge/break RCLK signal and external Xi2sCDCLK pin.
+ */
+#define S3C_FEATURE_CDCLKCON	(1 << 0)
+
+/**
+ * struct s3c_i2sv2_info - S3C I2S-V2 information
+ * @dev: The parent device passed to use from the probe.
+ * @regs: The pointer to the device registe block.
+ * @feature: Set of bit-flags indicating features of the controller.
+ * @master: True if the I2S core is the I2S bit clock master.
+ * @dma_playback: DMA information for playback channel.
+ * @dma_capture: DMA information for capture channel.
+ * @suspend_iismod: PM save for the IISMOD register.
+ * @suspend_iiscon: PM save for the IISCON register.
+ * @suspend_iispsr: PM save for the IISPSR register.
+ *
+ * This is the private codec state for the hardware associated with an
+ * I2S channel such as the register mappings and clock sources.
+ */
+struct s3c_i2sv2_info {
+	struct device	*dev;
+	void __iomem	*regs;
+
+	u32		feature;
+
+	struct clk	*iis_pclk;
+	struct clk	*iis_cclk;
+
+	unsigned char	 master;
+
+	struct s3c_dma_params	*dma_playback;
+	struct s3c_dma_params	*dma_capture;
+
+	u32		 suspend_iismod;
+	u32		 suspend_iiscon;
+	u32		 suspend_iispsr;
+
+	unsigned long	base;
+};
+
+extern struct clk *s3c_i2sv2_get_clock(struct snd_soc_dai *cpu_dai);
+
+struct s3c_i2sv2_rate_calc {
+	unsigned int	clk_div;	/* for prescaler */
+	unsigned int	fs_div;		/* for root frame clock */
+};
+
+extern int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
+				   unsigned int *fstab,
+				   unsigned int rate, struct clk *clk);
+
+/**
+ * s3c_i2sv2_probe - probe for i2s device helper
+ * @dai: The ASoC DAI structure supplied to the original probe.
+ * @i2s: Our local i2s structure to fill in.
+ * @base: The base address for the registers.
+ */
+extern int s3c_i2sv2_probe(struct snd_soc_dai *dai,
+			   struct s3c_i2sv2_info *i2s,
+			   unsigned long base);
+
+/**
+ * s3c_i2sv2_register_dai - register dai with soc core
+ * @dev: DAI device
+ * @id: DAI ID
+ * @drv: The driver structure to register
+ *
+ * Fill in any missing fields and then register the given dai with the
+ * soc core.
+ */
+extern int s3c_i2sv2_register_dai(struct device *dev, int id,
+		struct snd_soc_dai_driver *drv);
+
+#endif /* __SND_SOC_S3C24XX_S3C_I2SV2_I2S_H */
diff --git a/sound/soc/samsung/s3c2412-i2s.c b/sound/soc/samsung/s3c2412-i2s.c
new file mode 100644
index 0000000..7ea8378
--- /dev/null
+++ b/sound/soc/samsung/s3c2412-i2s.c
@@ -0,0 +1,212 @@
+/* sound/soc/samsung/s3c2412-i2s.c
+ *
+ * ALSA Soc Audio Layer - S3C2412 I2S driver
+ *
+ * Copyright (c) 2006 Wolfson Microelectronics PLC.
+ *	Graeme Gregory graeme.gregory@wolfsonmicro.com
+ *	linux@wolfsonmicro.com
+ *
+ * Copyright (c) 2007, 2004-2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <mach/hardware.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/dma.h>
+
+#include "dma.h"
+#include "regs-i2s-v2.h"
+#include "s3c2412-i2s.h"
+
+#define S3C2412_I2S_DEBUG 0
+
+static struct s3c2410_dma_client s3c2412_dma_client_out = {
+	.name		= "I2S PCM Stereo out"
+};
+
+static struct s3c2410_dma_client s3c2412_dma_client_in = {
+	.name		= "I2S PCM Stereo in"
+};
+
+static struct s3c_dma_params s3c2412_i2s_pcm_stereo_out = {
+	.client		= &s3c2412_dma_client_out,
+	.channel	= DMACH_I2S_OUT,
+	.dma_addr	= S3C2410_PA_IIS + S3C2412_IISTXD,
+	.dma_size	= 4,
+};
+
+static struct s3c_dma_params s3c2412_i2s_pcm_stereo_in = {
+	.client		= &s3c2412_dma_client_in,
+	.channel	= DMACH_I2S_IN,
+	.dma_addr	= S3C2410_PA_IIS + S3C2412_IISRXD,
+	.dma_size	= 4,
+};
+
+static struct s3c_i2sv2_info s3c2412_i2s;
+
+static int s3c2412_i2s_probe(struct snd_soc_dai *dai)
+{
+	int ret;
+
+	pr_debug("Entered %s\n", __func__);
+
+	ret = s3c_i2sv2_probe(dai, &s3c2412_i2s, S3C2410_PA_IIS);
+	if (ret)
+		return ret;
+
+	s3c2412_i2s.dma_capture = &s3c2412_i2s_pcm_stereo_in;
+	s3c2412_i2s.dma_playback = &s3c2412_i2s_pcm_stereo_out;
+
+	s3c2412_i2s.iis_cclk = clk_get(dai->dev, "i2sclk");
+	if (s3c2412_i2s.iis_cclk == NULL) {
+		pr_err("failed to get i2sclk clock\n");
+		iounmap(s3c2412_i2s.regs);
+		return -ENODEV;
+	}
+
+	/* Set MPLL as the source for IIS CLK */
+
+	clk_set_parent(s3c2412_i2s.iis_cclk, clk_get(NULL, "mpll"));
+	clk_enable(s3c2412_i2s.iis_cclk);
+
+	s3c2412_i2s.iis_cclk = s3c2412_i2s.iis_pclk;
+
+	/* Configure the I2S pins in correct mode */
+	s3c2410_gpio_cfgpin(S3C2410_GPE0, S3C2410_GPE0_I2SLRCK);
+	s3c2410_gpio_cfgpin(S3C2410_GPE1, S3C2410_GPE1_I2SSCLK);
+	s3c2410_gpio_cfgpin(S3C2410_GPE2, S3C2410_GPE2_CDCLK);
+	s3c2410_gpio_cfgpin(S3C2410_GPE3, S3C2410_GPE3_I2SSDI);
+	s3c2410_gpio_cfgpin(S3C2410_GPE4, S3C2410_GPE4_I2SSDO);
+
+	return 0;
+}
+
+static int s3c2412_i2s_remove(struct snd_soc_dai *dai)
+{
+	clk_disable(s3c2412_i2s.iis_cclk);
+	clk_put(s3c2412_i2s.iis_cclk);
+	iounmap(s3c2412_i2s.regs);
+
+	return 0;
+}
+
+static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *cpu_dai)
+{
+	struct s3c_i2sv2_info *i2s = snd_soc_dai_get_drvdata(cpu_dai);
+	struct s3c_dma_params *dma_data;
+	u32 iismod;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dma_data = i2s->dma_playback;
+	else
+		dma_data = i2s->dma_capture;
+
+	snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
+
+	iismod = readl(i2s->regs + S3C2412_IISMOD);
+	pr_debug("%s: r: IISMOD: %x\n", __func__, iismod);
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S8:
+		iismod |= S3C2412_IISMOD_8BIT;
+		break;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		iismod &= ~S3C2412_IISMOD_8BIT;
+		break;
+	}
+
+	writel(iismod, i2s->regs + S3C2412_IISMOD);
+	pr_debug("%s: w: IISMOD: %x\n", __func__, iismod);
+
+	return 0;
+}
+
+#define S3C2412_I2S_RATES \
+	(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
+	SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+	SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
+
+static struct snd_soc_dai_ops s3c2412_i2s_dai_ops = {
+	.hw_params	= s3c2412_i2s_hw_params,
+};
+
+static struct snd_soc_dai_driver s3c2412_i2s_dai = {
+	.probe		= s3c2412_i2s_probe,
+	.remove	= s3c2412_i2s_remove,
+	.playback = {
+		.channels_min	= 2,
+		.channels_max	= 2,
+		.rates		= S3C2412_I2S_RATES,
+		.formats	= SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,
+	},
+	.capture = {
+		.channels_min	= 2,
+		.channels_max	= 2,
+		.rates		= S3C2412_I2S_RATES,
+		.formats	= SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,
+	},
+	.ops = &s3c2412_i2s_dai_ops,
+};
+
+static __devinit int s3c2412_iis_dev_probe(struct platform_device *pdev)
+{
+	return snd_soc_register_dai(&pdev->dev, &s3c2412_i2s_dai);
+}
+
+static __devexit int s3c2412_iis_dev_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_dai(&pdev->dev);
+	return 0;
+}
+
+static struct platform_driver s3c2412_iis_driver = {
+	.probe  = s3c2412_iis_dev_probe,
+	.remove = s3c2412_iis_dev_remove,
+	.driver = {
+		.name = "s3c2412-iis",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init s3c2412_i2s_init(void)
+{
+	return platform_driver_register(&s3c2412_iis_driver);
+}
+module_init(s3c2412_i2s_init);
+
+static void __exit s3c2412_i2s_exit(void)
+{
+	platform_driver_unregister(&s3c2412_iis_driver);
+}
+module_exit(s3c2412_i2s_exit);
+
+/* Module information */
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("S3C2412 I2S SoC Interface");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c2412-iis");
diff --git a/sound/soc/samsung/s3c2412-i2s.h b/sound/soc/samsung/s3c2412-i2s.h
new file mode 100644
index 0000000..02ad579
--- /dev/null
+++ b/sound/soc/samsung/s3c2412-i2s.h
@@ -0,0 +1,27 @@
+/* sound/soc/samsung/s3c2412-i2s.c
+ *
+ * ALSA Soc Audio Layer - S3C2412 I2S driver
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+*/
+
+#ifndef __SND_SOC_S3C24XX_S3C2412_I2S_H
+#define __SND_SOC_S3C24XX_S3C2412_I2S_H __FILE__
+
+#include "s3c-i2s-v2.h"
+
+#define S3C2412_DIV_BCLK	S3C_I2SV2_DIV_BCLK
+#define S3C2412_DIV_RCLK	S3C_I2SV2_DIV_RCLK
+#define S3C2412_DIV_PRESCALER	S3C_I2SV2_DIV_PRESCALER
+
+#define S3C2412_CLKSRC_PCLK	S3C_I2SV2_CLKSRC_PCLK
+#define S3C2412_CLKSRC_I2SCLK	S3C_I2SV2_CLKSRC_AUDIOBUS
+
+#endif /* __SND_SOC_S3C24XX_S3C2412_I2S_H */
diff --git a/sound/soc/samsung/s3c24xx-i2s.c b/sound/soc/samsung/s3c24xx-i2s.c
new file mode 100644
index 0000000..13e41ed
--- /dev/null
+++ b/sound/soc/samsung/s3c24xx-i2s.c
@@ -0,0 +1,519 @@
+/*
+ * s3c24xx-i2s.c  --  ALSA Soc Audio Layer
+ *
+ * (c) 2006 Wolfson Microelectronics PLC.
+ * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ * Copyright 2004-2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/jiffies.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+
+#include <asm/dma.h>
+#include <mach/dma.h>
+
+#include <plat/regs-iis.h>
+
+#include "dma.h"
+#include "s3c24xx-i2s.h"
+
+static struct s3c2410_dma_client s3c24xx_dma_client_out = {
+	.name = "I2S PCM Stereo out"
+};
+
+static struct s3c2410_dma_client s3c24xx_dma_client_in = {
+	.name = "I2S PCM Stereo in"
+};
+
+static struct s3c_dma_params s3c24xx_i2s_pcm_stereo_out = {
+	.client		= &s3c24xx_dma_client_out,
+	.channel	= DMACH_I2S_OUT,
+	.dma_addr	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	.dma_size	= 2,
+};
+
+static struct s3c_dma_params s3c24xx_i2s_pcm_stereo_in = {
+	.client		= &s3c24xx_dma_client_in,
+	.channel	= DMACH_I2S_IN,
+	.dma_addr	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	.dma_size	= 2,
+};
+
+struct s3c24xx_i2s_info {
+	void __iomem	*regs;
+	struct clk	*iis_clk;
+	u32		iiscon;
+	u32		iismod;
+	u32		iisfcon;
+	u32		iispsr;
+};
+static struct s3c24xx_i2s_info s3c24xx_i2s;
+
+static void s3c24xx_snd_txctrl(int on)
+{
+	u32 iisfcon;
+	u32 iiscon;
+	u32 iismod;
+
+	pr_debug("Entered %s\n", __func__);
+
+	iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON);
+	iiscon  = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
+	iismod  = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+
+	pr_debug("r: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
+
+	if (on) {
+		iisfcon |= S3C2410_IISFCON_TXDMA | S3C2410_IISFCON_TXENABLE;
+		iiscon  |= S3C2410_IISCON_TXDMAEN | S3C2410_IISCON_IISEN;
+		iiscon  &= ~S3C2410_IISCON_TXIDLE;
+		iismod  |= S3C2410_IISMOD_TXMODE;
+
+		writel(iismod,  s3c24xx_i2s.regs + S3C2410_IISMOD);
+		writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
+		writel(iiscon,  s3c24xx_i2s.regs + S3C2410_IISCON);
+	} else {
+		/* note, we have to disable the FIFOs otherwise bad things
+		 * seem to happen when the DMA stops. According to the
+		 * Samsung supplied kernel, this should allow the DMA
+		 * engine and FIFOs to reset. If this isn't allowed, the
+		 * DMA engine will simply freeze randomly.
+		 */
+
+		iisfcon &= ~S3C2410_IISFCON_TXENABLE;
+		iisfcon &= ~S3C2410_IISFCON_TXDMA;
+		iiscon  |=  S3C2410_IISCON_TXIDLE;
+		iiscon  &= ~S3C2410_IISCON_TXDMAEN;
+		iismod  &= ~S3C2410_IISMOD_TXMODE;
+
+		writel(iiscon,  s3c24xx_i2s.regs + S3C2410_IISCON);
+		writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
+		writel(iismod,  s3c24xx_i2s.regs + S3C2410_IISMOD);
+	}
+
+	pr_debug("w: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
+}
+
+static void s3c24xx_snd_rxctrl(int on)
+{
+	u32 iisfcon;
+	u32 iiscon;
+	u32 iismod;
+
+	pr_debug("Entered %s\n", __func__);
+
+	iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON);
+	iiscon  = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
+	iismod  = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+
+	pr_debug("r: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
+
+	if (on) {
+		iisfcon |= S3C2410_IISFCON_RXDMA | S3C2410_IISFCON_RXENABLE;
+		iiscon  |= S3C2410_IISCON_RXDMAEN | S3C2410_IISCON_IISEN;
+		iiscon  &= ~S3C2410_IISCON_RXIDLE;
+		iismod  |= S3C2410_IISMOD_RXMODE;
+
+		writel(iismod,  s3c24xx_i2s.regs + S3C2410_IISMOD);
+		writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
+		writel(iiscon,  s3c24xx_i2s.regs + S3C2410_IISCON);
+	} else {
+		/* note, we have to disable the FIFOs otherwise bad things
+		 * seem to happen when the DMA stops. According to the
+		 * Samsung supplied kernel, this should allow the DMA
+		 * engine and FIFOs to reset. If this isn't allowed, the
+		 * DMA engine will simply freeze randomly.
+		 */
+
+		iisfcon &= ~S3C2410_IISFCON_RXENABLE;
+		iisfcon &= ~S3C2410_IISFCON_RXDMA;
+		iiscon  |= S3C2410_IISCON_RXIDLE;
+		iiscon  &= ~S3C2410_IISCON_RXDMAEN;
+		iismod  &= ~S3C2410_IISMOD_RXMODE;
+
+		writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
+		writel(iiscon,  s3c24xx_i2s.regs + S3C2410_IISCON);
+		writel(iismod,  s3c24xx_i2s.regs + S3C2410_IISMOD);
+	}
+
+	pr_debug("w: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
+}
+
+/*
+ * Wait for the LR signal to allow synchronisation to the L/R clock
+ * from the codec. May only be needed for slave mode.
+ */
+static int s3c24xx_snd_lrsync(void)
+{
+	u32 iiscon;
+	int timeout = 50; /* 5ms */
+
+	pr_debug("Entered %s\n", __func__);
+
+	while (1) {
+		iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
+		if (iiscon & S3C2410_IISCON_LRINDEX)
+			break;
+
+		if (!timeout--)
+			return -ETIMEDOUT;
+		udelay(100);
+	}
+
+	return 0;
+}
+
+/*
+ * Check whether CPU is the master or slave
+ */
+static inline int s3c24xx_snd_is_clkmaster(void)
+{
+	pr_debug("Entered %s\n", __func__);
+
+	return (readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & S3C2410_IISMOD_SLAVE) ? 0:1;
+}
+
+/*
+ * Set S3C24xx I2S DAI format
+ */
+static int s3c24xx_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
+		unsigned int fmt)
+{
+	u32 iismod;
+
+	pr_debug("Entered %s\n", __func__);
+
+	iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+	pr_debug("hw_params r: IISMOD: %x \n", iismod);
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		iismod |= S3C2410_IISMOD_SLAVE;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		iismod &= ~S3C2410_IISMOD_SLAVE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_LEFT_J:
+		iismod |= S3C2410_IISMOD_MSB;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		iismod &= ~S3C2410_IISMOD_MSB;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
+	pr_debug("hw_params w: IISMOD: %x \n", iismod);
+	return 0;
+}
+
+static int s3c24xx_i2s_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s3c_dma_params *dma_data;
+	u32 iismod;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dma_data = &s3c24xx_i2s_pcm_stereo_out;
+	else
+		dma_data = &s3c24xx_i2s_pcm_stereo_in;
+
+	snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data);
+
+	/* Working copies of register */
+	iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+	pr_debug("hw_params r: IISMOD: %x\n", iismod);
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S8:
+		iismod &= ~S3C2410_IISMOD_16BIT;
+		dma_data->dma_size = 1;
+		break;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		iismod |= S3C2410_IISMOD_16BIT;
+		dma_data->dma_size = 2;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
+	pr_debug("hw_params w: IISMOD: %x\n", iismod);
+	return 0;
+}
+
+static int s3c24xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+			       struct snd_soc_dai *dai)
+{
+	int ret = 0;
+	struct s3c_dma_params *dma_data =
+		snd_soc_dai_get_dma_data(dai, substream);
+
+	pr_debug("Entered %s\n", __func__);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		if (!s3c24xx_snd_is_clkmaster()) {
+			ret = s3c24xx_snd_lrsync();
+			if (ret)
+				goto exit_err;
+		}
+
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+			s3c24xx_snd_rxctrl(1);
+		else
+			s3c24xx_snd_txctrl(1);
+
+		s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+			s3c24xx_snd_rxctrl(0);
+		else
+			s3c24xx_snd_txctrl(0);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+exit_err:
+	return ret;
+}
+
+/*
+ * Set S3C24xx Clock source
+ */
+static int s3c24xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai,
+	int clk_id, unsigned int freq, int dir)
+{
+	u32 iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+
+	pr_debug("Entered %s\n", __func__);
+
+	iismod &= ~S3C2440_IISMOD_MPLL;
+
+	switch (clk_id) {
+	case S3C24XX_CLKSRC_PCLK:
+		break;
+	case S3C24XX_CLKSRC_MPLL:
+		iismod |= S3C2440_IISMOD_MPLL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
+	return 0;
+}
+
+/*
+ * Set S3C24xx Clock dividers
+ */
+static int s3c24xx_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai,
+	int div_id, int div)
+{
+	u32 reg;
+
+	pr_debug("Entered %s\n", __func__);
+
+	switch (div_id) {
+	case S3C24XX_DIV_BCLK:
+		reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~S3C2410_IISMOD_FS_MASK;
+		writel(reg | div, s3c24xx_i2s.regs + S3C2410_IISMOD);
+		break;
+	case S3C24XX_DIV_MCLK:
+		reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~(S3C2410_IISMOD_384FS);
+		writel(reg | div, s3c24xx_i2s.regs + S3C2410_IISMOD);
+		break;
+	case S3C24XX_DIV_PRESCALER:
+		writel(div, s3c24xx_i2s.regs + S3C2410_IISPSR);
+		reg = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
+		writel(reg | S3C2410_IISCON_PSCEN, s3c24xx_i2s.regs + S3C2410_IISCON);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * To avoid duplicating clock code, allow machine driver to
+ * get the clockrate from here.
+ */
+u32 s3c24xx_i2s_get_clockrate(void)
+{
+	return clk_get_rate(s3c24xx_i2s.iis_clk);
+}
+EXPORT_SYMBOL_GPL(s3c24xx_i2s_get_clockrate);
+
+static int s3c24xx_i2s_probe(struct snd_soc_dai *dai)
+{
+	pr_debug("Entered %s\n", __func__);
+
+	s3c24xx_i2s.regs = ioremap(S3C2410_PA_IIS, 0x100);
+	if (s3c24xx_i2s.regs == NULL)
+		return -ENXIO;
+
+	s3c24xx_i2s.iis_clk = clk_get(dai->dev, "iis");
+	if (s3c24xx_i2s.iis_clk == NULL) {
+		pr_err("failed to get iis_clock\n");
+		iounmap(s3c24xx_i2s.regs);
+		return -ENODEV;
+	}
+	clk_enable(s3c24xx_i2s.iis_clk);
+
+	/* Configure the I2S pins in correct mode */
+	s3c2410_gpio_cfgpin(S3C2410_GPE0, S3C2410_GPE0_I2SLRCK);
+	s3c2410_gpio_cfgpin(S3C2410_GPE1, S3C2410_GPE1_I2SSCLK);
+	s3c2410_gpio_cfgpin(S3C2410_GPE2, S3C2410_GPE2_CDCLK);
+	s3c2410_gpio_cfgpin(S3C2410_GPE3, S3C2410_GPE3_I2SSDI);
+	s3c2410_gpio_cfgpin(S3C2410_GPE4, S3C2410_GPE4_I2SSDO);
+
+	writel(S3C2410_IISCON_IISEN, s3c24xx_i2s.regs + S3C2410_IISCON);
+
+	s3c24xx_snd_txctrl(0);
+	s3c24xx_snd_rxctrl(0);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c24xx_i2s_suspend(struct snd_soc_dai *cpu_dai)
+{
+	pr_debug("Entered %s\n", __func__);
+
+	s3c24xx_i2s.iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
+	s3c24xx_i2s.iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
+	s3c24xx_i2s.iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON);
+	s3c24xx_i2s.iispsr = readl(s3c24xx_i2s.regs + S3C2410_IISPSR);
+
+	clk_disable(s3c24xx_i2s.iis_clk);
+
+	return 0;
+}
+
+static int s3c24xx_i2s_resume(struct snd_soc_dai *cpu_dai)
+{
+	pr_debug("Entered %s\n", __func__);
+	clk_enable(s3c24xx_i2s.iis_clk);
+
+	writel(s3c24xx_i2s.iiscon, s3c24xx_i2s.regs + S3C2410_IISCON);
+	writel(s3c24xx_i2s.iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
+	writel(s3c24xx_i2s.iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
+	writel(s3c24xx_i2s.iispsr, s3c24xx_i2s.regs + S3C2410_IISPSR);
+
+	return 0;
+}
+#else
+#define s3c24xx_i2s_suspend NULL
+#define s3c24xx_i2s_resume NULL
+#endif
+
+
+#define S3C24XX_I2S_RATES \
+	(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
+	SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+	SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
+
+static struct snd_soc_dai_ops s3c24xx_i2s_dai_ops = {
+	.trigger	= s3c24xx_i2s_trigger,
+	.hw_params	= s3c24xx_i2s_hw_params,
+	.set_fmt	= s3c24xx_i2s_set_fmt,
+	.set_clkdiv	= s3c24xx_i2s_set_clkdiv,
+	.set_sysclk	= s3c24xx_i2s_set_sysclk,
+};
+
+static struct snd_soc_dai_driver s3c24xx_i2s_dai = {
+	.probe = s3c24xx_i2s_probe,
+	.suspend = s3c24xx_i2s_suspend,
+	.resume = s3c24xx_i2s_resume,
+	.playback = {
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = S3C24XX_I2S_RATES,
+		.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,},
+	.capture = {
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = S3C24XX_I2S_RATES,
+		.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,},
+	.ops = &s3c24xx_i2s_dai_ops,
+};
+
+static __devinit int s3c24xx_iis_dev_probe(struct platform_device *pdev)
+{
+	return snd_soc_register_dai(&pdev->dev, &s3c24xx_i2s_dai);
+}
+
+static __devexit int s3c24xx_iis_dev_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_dai(&pdev->dev);
+	return 0;
+}
+
+static struct platform_driver s3c24xx_iis_driver = {
+	.probe  = s3c24xx_iis_dev_probe,
+	.remove = s3c24xx_iis_dev_remove,
+	.driver = {
+		.name = "s3c24xx-iis",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init s3c24xx_i2s_init(void)
+{
+	return platform_driver_register(&s3c24xx_iis_driver);
+}
+module_init(s3c24xx_i2s_init);
+
+static void __exit s3c24xx_i2s_exit(void)
+{
+	platform_driver_unregister(&s3c24xx_iis_driver);
+}
+module_exit(s3c24xx_i2s_exit);
+
+/* Module information */
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("s3c24xx I2S SoC Interface");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c24xx-iis");
diff --git a/sound/soc/samsung/s3c24xx-i2s.h b/sound/soc/samsung/s3c24xx-i2s.h
new file mode 100644
index 0000000..f9ca04e
--- /dev/null
+++ b/sound/soc/samsung/s3c24xx-i2s.h
@@ -0,0 +1,35 @@
+/*
+ * s3c24xx-i2s.c  --  ALSA Soc Audio Layer
+ *
+ * Copyright 2005 Wolfson Microelectronics PLC.
+ * Author: Graeme Gregory
+ *         graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  Revision history
+ *    10th Nov 2006   Initial version.
+ */
+
+#ifndef S3C24XXI2S_H_
+#define S3C24XXI2S_H_
+
+/* clock sources */
+#define S3C24XX_CLKSRC_PCLK 0
+#define S3C24XX_CLKSRC_MPLL 1
+
+/* Clock dividers */
+#define S3C24XX_DIV_MCLK	0
+#define S3C24XX_DIV_BCLK	1
+#define S3C24XX_DIV_PRESCALER	2
+
+/* prescaler */
+#define S3C24XX_PRESCALE(a,b) \
+	(((a - 1) << S3C2410_IISPSR_INTSHIFT) | ((b - 1) << S3C2410_IISPSR_EXTSHFIT))
+
+u32 s3c24xx_i2s_get_clockrate(void);
+
+#endif /*S3C24XXI2S_H_*/
diff --git a/sound/soc/samsung/s3c24xx_simtec.c b/sound/soc/samsung/s3c24xx_simtec.c
new file mode 100644
index 0000000..4a1b002
--- /dev/null
+++ b/sound/soc/samsung/s3c24xx_simtec.c
@@ -0,0 +1,395 @@
+/* sound/soc/samsung/s3c24xx_simtec.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <plat/audio-simtec.h>
+
+#include "dma.h"
+#include "s3c24xx-i2s.h"
+#include "s3c24xx_simtec.h"
+
+static struct s3c24xx_audio_simtec_pdata *pdata;
+static struct clk *xtal_clk;
+
+static int spk_gain;
+static int spk_unmute;
+
+/**
+ * speaker_gain_get - read the speaker gain setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be updated.
+ *
+ * Read the value for the AMP gain control.
+ */
+static int speaker_gain_get(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.integer.value[0] = spk_gain;
+	return 0;
+}
+
+/**
+ * speaker_gain_set - set the value of the speaker amp gain
+ * @value: The value to write.
+ */
+static void speaker_gain_set(int value)
+{
+	gpio_set_value_cansleep(pdata->amp_gain[0], value & 1);
+	gpio_set_value_cansleep(pdata->amp_gain[1], value >> 1);
+}
+
+/**
+ * speaker_gain_put - set the speaker gain setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be set.
+ *
+ * Set the value of the speaker gain from the specified
+ * @ucontrol setting.
+ *
+ * Note, if the speaker amp is muted, then we do not set a gain value
+ * as at-least one of the ICs that is fitted will try and power up even
+ * if the main control is set to off.
+ */
+static int speaker_gain_put(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	int value = ucontrol->value.integer.value[0];
+
+	spk_gain = value;
+
+	if (!spk_unmute)
+		speaker_gain_set(value);
+
+	return 0;
+}
+
+static const struct snd_kcontrol_new amp_gain_controls[] = {
+	SOC_SINGLE_EXT("Speaker Gain", 0, 0, 3, 0,
+		       speaker_gain_get, speaker_gain_put),
+};
+
+/**
+ * spk_unmute_state - set the unmute state of the speaker
+ * @to: zero to unmute, non-zero to ununmute.
+ */
+static void spk_unmute_state(int to)
+{
+	pr_debug("%s: to=%d\n", __func__, to);
+
+	spk_unmute = to;
+	gpio_set_value(pdata->amp_gpio, to);
+
+	/* if we're umuting, also re-set the gain */
+	if (to && pdata->amp_gain[0] > 0)
+		speaker_gain_set(spk_gain);
+}
+
+/**
+ * speaker_unmute_get - read the speaker unmute setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be updated.
+ *
+ * Read the value for the AMP gain control.
+ */
+static int speaker_unmute_get(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.integer.value[0] = spk_unmute;
+	return 0;
+}
+
+/**
+ * speaker_unmute_put - set the speaker unmute setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be set.
+ *
+ * Set the value of the speaker gain from the specified
+ * @ucontrol setting.
+ */
+static int speaker_unmute_put(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	spk_unmute_state(ucontrol->value.integer.value[0]);
+	return 0;
+}
+
+/* This is added as a manual control as the speaker amps create clicks
+ * when their power state is changed, which are far more noticeable than
+ * anything produced by the CODEC itself.
+ */
+static const struct snd_kcontrol_new amp_unmute_controls[] = {
+	SOC_SINGLE_EXT("Speaker Switch", 0, 0, 1, 0,
+		       speaker_unmute_get, speaker_unmute_put),
+};
+
+void simtec_audio_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+
+	if (pdata->amp_gpio > 0) {
+		pr_debug("%s: adding amp routes\n", __func__);
+
+		snd_soc_add_controls(codec, amp_unmute_controls,
+				     ARRAY_SIZE(amp_unmute_controls));
+	}
+
+	if (pdata->amp_gain[0] > 0) {
+		pr_debug("%s: adding amp controls\n", __func__);
+		snd_soc_add_controls(codec, amp_gain_controls,
+				     ARRAY_SIZE(amp_gain_controls));
+	}
+}
+EXPORT_SYMBOL_GPL(simtec_audio_init);
+
+#define CODEC_CLOCK 12000000
+
+/**
+ * simtec_hw_params - update hardware parameters
+ * @substream: The audio substream instance.
+ * @params: The parameters requested.
+ *
+ * Update the codec data routing and configuration  settings
+ * from the supplied data.
+ */
+static int simtec_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	int ret;
+
+	/* Set the CODEC as the bus clock master, I2S */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (ret) {
+		pr_err("%s: failed set cpu dai format\n", __func__);
+		return ret;
+	}
+
+	/* Set the CODEC as the bus clock master */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (ret) {
+		pr_err("%s: failed set codec dai format\n", __func__);
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0,
+				     CODEC_CLOCK, SND_SOC_CLOCK_IN);
+	if (ret) {
+		pr_err( "%s: failed setting codec sysclk\n", __func__);
+		return ret;
+	}
+
+	if (pdata->use_mpllin) {
+		ret = snd_soc_dai_set_sysclk(cpu_dai, S3C24XX_CLKSRC_MPLL,
+					     0, SND_SOC_CLOCK_OUT);
+
+		if (ret) {
+			pr_err("%s: failed to set MPLLin as clksrc\n",
+			       __func__);
+			return ret;
+		}
+	}
+
+	if (pdata->output_cdclk) {
+		int cdclk_scale;
+
+		cdclk_scale = clk_get_rate(xtal_clk) / CODEC_CLOCK;
+		cdclk_scale--;
+
+		ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
+					     cdclk_scale);
+	}
+
+	return 0;
+}
+
+static int simtec_call_startup(struct s3c24xx_audio_simtec_pdata *pd)
+{
+	/* call any board supplied startup code, this currently only
+	 * covers the bast/vr1000 which have a CPLD in the way of the
+	 * LRCLK */
+	if (pd->startup)
+		pd->startup();
+
+	return 0;
+}
+
+static struct snd_soc_ops simtec_snd_ops = {
+	.hw_params	= simtec_hw_params,
+};
+
+/**
+ * attach_gpio_amp - get and configure the necessary gpios
+ * @dev: The device we're probing.
+ * @pd: The platform data supplied by the board.
+ *
+ * If there is a GPIO based amplifier attached to the board, claim
+ * the necessary GPIO lines for it, and set default values.
+ */
+static int attach_gpio_amp(struct device *dev,
+			   struct s3c24xx_audio_simtec_pdata *pd)
+{
+	int ret;
+
+	/* attach gpio amp gain (if any) */
+	if (pdata->amp_gain[0] > 0) {
+		ret = gpio_request(pd->amp_gain[0], "gpio-amp-gain0");
+		if (ret) {
+			dev_err(dev, "cannot get amp gpio gain0\n");
+			return ret;
+		}
+
+		ret = gpio_request(pd->amp_gain[1], "gpio-amp-gain1");
+		if (ret) {
+			dev_err(dev, "cannot get amp gpio gain1\n");
+			gpio_free(pdata->amp_gain[0]);
+			return ret;
+		}
+
+		gpio_direction_output(pd->amp_gain[0], 0);
+		gpio_direction_output(pd->amp_gain[1], 0);
+	}
+
+	/* note, currently we assume GPA0 isn't valid amp */
+	if (pdata->amp_gpio > 0) {
+		ret = gpio_request(pd->amp_gpio, "gpio-amp");
+		if (ret) {
+			dev_err(dev, "cannot get amp gpio %d (%d)\n",
+				pd->amp_gpio, ret);
+			goto err_amp;
+		}
+
+		/* set the amp off at startup */
+		spk_unmute_state(0);
+	}
+
+	return 0;
+
+err_amp:
+	if (pd->amp_gain[0] > 0) {
+		gpio_free(pd->amp_gain[0]);
+		gpio_free(pd->amp_gain[1]);
+	}
+
+	return ret;
+}
+
+static void detach_gpio_amp(struct s3c24xx_audio_simtec_pdata *pd)
+{
+	if (pd->amp_gain[0] > 0) {
+		gpio_free(pd->amp_gain[0]);
+		gpio_free(pd->amp_gain[1]);
+	}
+
+	if (pd->amp_gpio > 0)
+		gpio_free(pd->amp_gpio);
+}
+
+#ifdef CONFIG_PM
+int simtec_audio_resume(struct device *dev)
+{
+	simtec_call_startup(pdata);
+	return 0;
+}
+
+const struct dev_pm_ops simtec_audio_pmops = {
+	.resume	= simtec_audio_resume,
+};
+EXPORT_SYMBOL_GPL(simtec_audio_pmops);
+#endif
+
+int __devinit simtec_audio_core_probe(struct platform_device *pdev,
+				      struct snd_soc_card *card)
+{
+	struct platform_device *snd_dev;
+	int ret;
+
+	card->dai_link->ops = &simtec_snd_ops;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data supplied\n");
+		return -EINVAL;
+	}
+
+	simtec_call_startup(pdata);
+
+	xtal_clk = clk_get(&pdev->dev, "xtal");
+	if (IS_ERR(xtal_clk)) {
+		dev_err(&pdev->dev, "could not get clkout0\n");
+		return -EINVAL;
+	}
+
+	dev_info(&pdev->dev, "xtal rate is %ld\n", clk_get_rate(xtal_clk));
+
+	ret = attach_gpio_amp(&pdev->dev, pdata);
+	if (ret)
+		goto err_clk;
+
+	snd_dev = platform_device_alloc("soc-audio", -1);
+	if (!snd_dev) {
+		dev_err(&pdev->dev, "failed to alloc soc-audio devicec\n");
+		ret = -ENOMEM;
+		goto err_gpio;
+	}
+
+	platform_set_drvdata(snd_dev, card);
+
+	ret = platform_device_add(snd_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add soc-audio dev\n");
+		goto err_pdev;
+	}
+
+	platform_set_drvdata(pdev, snd_dev);
+	return 0;
+
+err_pdev:
+	platform_device_put(snd_dev);
+
+err_gpio:
+	detach_gpio_amp(pdata);
+
+err_clk:
+	clk_put(xtal_clk);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(simtec_audio_core_probe);
+
+int __devexit simtec_audio_remove(struct platform_device *pdev)
+{
+	struct platform_device *snd_dev = platform_get_drvdata(pdev);
+
+	platform_device_unregister(snd_dev);
+
+	detach_gpio_amp(pdata);
+	clk_put(xtal_clk);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(simtec_audio_remove);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("ALSA SoC Simtec Audio common support");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/samsung/s3c24xx_simtec.h b/sound/soc/samsung/s3c24xx_simtec.h
new file mode 100644
index 0000000..8270748
--- /dev/null
+++ b/sound/soc/samsung/s3c24xx_simtec.h
@@ -0,0 +1,22 @@
+/* sound/soc/samsung/s3c24xx_simtec.h
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void simtec_audio_init(struct snd_soc_pcm_runtime *rtd);
+
+extern int simtec_audio_core_probe(struct platform_device *pdev,
+				   struct snd_soc_card *card);
+
+extern int simtec_audio_remove(struct platform_device *pdev);
+
+#ifdef CONFIG_PM
+extern const struct dev_pm_ops simtec_audio_pmops;
+#define simtec_audio_pm &simtec_audio_pmops
+#else
+#define simtec_audio_pm NULL
+#endif
diff --git a/sound/soc/samsung/s3c24xx_simtec_hermes.c b/sound/soc/samsung/s3c24xx_simtec_hermes.c
new file mode 100644
index 0000000..fec4cac
--- /dev/null
+++ b/sound/soc/samsung/s3c24xx_simtec_hermes.c
@@ -0,0 +1,146 @@
+/* sound/soc/samsung/s3c24xx_simtec_hermes.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <plat/audio-simtec.h>
+
+#include "dma.h"
+#include "s3c24xx-i2s.h"
+#include "s3c24xx_simtec.h"
+
+#include "../codecs/tlv320aic3x.h"
+
+static const struct snd_soc_dapm_widget dapm_widgets[] = {
+	SND_SOC_DAPM_LINE("GSM Out", NULL),
+	SND_SOC_DAPM_LINE("GSM In", NULL),
+	SND_SOC_DAPM_LINE("Line In", NULL),
+	SND_SOC_DAPM_LINE("Line Out", NULL),
+	SND_SOC_DAPM_LINE("ZV", NULL),
+	SND_SOC_DAPM_MIC("Mic Jack", NULL),
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+};
+
+static const struct snd_soc_dapm_route base_map[] = {
+	/* Headphone connected to HP{L,R}OUT and HP{L,R}COM */
+
+	{ "Headphone Jack", NULL, "HPLOUT" },
+	{ "Headphone Jack", NULL, "HPLCOM" },
+	{ "Headphone Jack", NULL, "HPROUT" },
+	{ "Headphone Jack", NULL, "HPRCOM" },
+
+	/* ZV connected to Line1 */
+
+	{ "LINE1L", NULL, "ZV" },
+	{ "LINE1R", NULL, "ZV" },
+
+	/* Line In connected to Line2 */
+
+	{ "LINE2L", NULL, "Line In" },
+	{ "LINE2R", NULL, "Line In" },
+
+	/* Microphone connected to MIC3R and MIC_BIAS */
+
+	{ "MIC3L", NULL, "Mic Jack" },
+
+	/* GSM connected to MONO_LOUT and MIC3L (in) */
+
+	{ "GSM Out", NULL, "MONO_LOUT" },
+	{ "MIC3L", NULL, "GSM In" },
+
+	/* Speaker is connected to LINEOUT{LN,LP,RN,RP}, however we are
+	 * not using the DAPM to power it up and down as there it makes
+	 * a click when powering up. */
+};
+
+/**
+ * simtec_hermes_init - initialise and add controls
+ * @codec; The codec instance to attach to.
+ *
+ * Attach our controls and configure the necessary codec
+ * mappings for our sound card instance.
+*/
+static int simtec_hermes_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+
+	snd_soc_dapm_new_controls(codec, dapm_widgets,
+				  ARRAY_SIZE(dapm_widgets));
+
+	snd_soc_dapm_add_routes(codec, base_map, ARRAY_SIZE(base_map));
+
+	snd_soc_dapm_enable_pin(codec, "Headphone Jack");
+	snd_soc_dapm_enable_pin(codec, "Line In");
+	snd_soc_dapm_enable_pin(codec, "Line Out");
+	snd_soc_dapm_enable_pin(codec, "Mic Jack");
+
+	simtec_audio_init(rtd);
+	snd_soc_dapm_sync(codec);
+
+	return 0;
+}
+
+static struct snd_soc_dai_link simtec_dai_aic33 = {
+	.name		= "tlv320aic33",
+	.stream_name	= "TLV320AIC33",
+	.codec_name	= "tlv320aic3x-codec.0-0x1a",
+	.cpu_dai_name	= "s3c24xx-i2s",
+	.codec_dai_name = "tlv320aic3x-hifi",
+	.platform_name	= "samsung-audio",
+	.init		= simtec_hermes_init,
+};
+
+/* simtec audio machine driver */
+static struct snd_soc_card snd_soc_machine_simtec_aic33 = {
+	.name		= "Simtec-Hermes",
+	.dai_link	= &simtec_dai_aic33,
+	.num_links	= 1,
+};
+
+static int __devinit simtec_audio_hermes_probe(struct platform_device *pd)
+{
+	dev_info(&pd->dev, "probing....\n");
+	return simtec_audio_core_probe(pd, &snd_soc_machine_simtec_aic33);
+}
+
+static struct platform_driver simtec_audio_hermes_platdrv = {
+	.driver	= {
+		.owner	= THIS_MODULE,
+		.name	= "s3c24xx-simtec-hermes-snd",
+		.pm	= simtec_audio_pm,
+	},
+	.probe	= simtec_audio_hermes_probe,
+	.remove	= __devexit_p(simtec_audio_remove),
+};
+
+MODULE_ALIAS("platform:s3c24xx-simtec-hermes-snd");
+
+static int __init simtec_hermes_modinit(void)
+{
+	return platform_driver_register(&simtec_audio_hermes_platdrv);
+}
+
+static void __exit simtec_hermes_modexit(void)
+{
+	platform_driver_unregister(&simtec_audio_hermes_platdrv);
+}
+
+module_init(simtec_hermes_modinit);
+module_exit(simtec_hermes_modexit);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("ALSA SoC Simtec Audio support");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c b/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c
new file mode 100644
index 0000000..7915e02
--- /dev/null
+++ b/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c
@@ -0,0 +1,134 @@
+/* sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <plat/audio-simtec.h>
+
+#include "dma.h"
+#include "s3c24xx-i2s.h"
+#include "s3c24xx_simtec.h"
+
+#include "../codecs/tlv320aic23.h"
+
+/* supported machines:
+ *
+ * Machine	Connections		AMP
+ * -------	-----------		---
+ * BAST		MIC, HPOUT, LOUT, LIN	TPA2001D1 (HPOUTL,R) (gain hardwired)
+ * VR1000	HPOUT, LIN		None
+ * VR2000	LIN, LOUT, MIC, HP	LM4871 (HPOUTL,R)
+ * DePicture	LIN, LOUT, MIC, HP	LM4871 (HPOUTL,R)
+ * Anubis	LIN, LOUT, MIC, HP	TPA2001D1 (HPOUTL,R)
+ */
+
+static const struct snd_soc_dapm_widget dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_LINE("Line In", NULL),
+	SND_SOC_DAPM_LINE("Line Out", NULL),
+	SND_SOC_DAPM_MIC("Mic Jack", NULL),
+};
+
+static const struct snd_soc_dapm_route base_map[] = {
+	{ "Headphone Jack", NULL, "LHPOUT"},
+	{ "Headphone Jack", NULL, "RHPOUT"},
+
+	{ "Line Out", NULL, "LOUT" },
+	{ "Line Out", NULL, "ROUT" },
+
+	{ "LLINEIN", NULL, "Line In"},
+	{ "RLINEIN", NULL, "Line In"},
+
+	{ "MICIN", NULL, "Mic Jack"},
+};
+
+/**
+ * simtec_tlv320aic23_init - initialise and add controls
+ * @codec; The codec instance to attach to.
+ *
+ * Attach our controls and configure the necessary codec
+ * mappings for our sound card instance.
+*/
+static int simtec_tlv320aic23_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+
+	snd_soc_dapm_new_controls(codec, dapm_widgets,
+				  ARRAY_SIZE(dapm_widgets));
+
+	snd_soc_dapm_add_routes(codec, base_map, ARRAY_SIZE(base_map));
+
+	snd_soc_dapm_enable_pin(codec, "Headphone Jack");
+	snd_soc_dapm_enable_pin(codec, "Line In");
+	snd_soc_dapm_enable_pin(codec, "Line Out");
+	snd_soc_dapm_enable_pin(codec, "Mic Jack");
+
+	simtec_audio_init(rtd);
+	snd_soc_dapm_sync(codec);
+
+	return 0;
+}
+
+static struct snd_soc_dai_link simtec_dai_aic23 = {
+	.name		= "tlv320aic23",
+	.stream_name	= "TLV320AIC23",
+	.codec_name	= "tlv320aic3x-codec.0-0x1a",
+	.cpu_dai_name	= "s3c24xx-i2s",
+	.codec_dai_name = "tlv320aic3x-hifi",
+	.platform_name	= "samsung-audio",
+	.init		= simtec_tlv320aic23_init,
+};
+
+/* simtec audio machine driver */
+static struct snd_soc_card snd_soc_machine_simtec_aic23 = {
+	.name		= "Simtec",
+	.dai_link	= &simtec_dai_aic23,
+	.num_links	= 1,
+};
+
+static int __devinit simtec_audio_tlv320aic23_probe(struct platform_device *pd)
+{
+	return simtec_audio_core_probe(pd, &snd_soc_machine_simtec_aic23);
+}
+
+static struct platform_driver simtec_audio_tlv320aic23_platdrv = {
+	.driver	= {
+		.owner	= THIS_MODULE,
+		.name	= "s3c24xx-simtec-tlv320aic23",
+		.pm	= simtec_audio_pm,
+	},
+	.probe	= simtec_audio_tlv320aic23_probe,
+	.remove	= __devexit_p(simtec_audio_remove),
+};
+
+MODULE_ALIAS("platform:s3c24xx-simtec-tlv320aic23");
+
+static int __init simtec_tlv320aic23_modinit(void)
+{
+	return platform_driver_register(&simtec_audio_tlv320aic23_platdrv);
+}
+
+static void __exit simtec_tlv320aic23_modexit(void)
+{
+	platform_driver_unregister(&simtec_audio_tlv320aic23_platdrv);
+}
+
+module_init(simtec_tlv320aic23_modinit);
+module_exit(simtec_tlv320aic23_modexit);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("ALSA SoC Simtec Audio support");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/samsung/s3c24xx_uda134x.c b/sound/soc/samsung/s3c24xx_uda134x.c
new file mode 100644
index 0000000..87eeb46
--- /dev/null
+++ b/sound/soc/samsung/s3c24xx_uda134x.c
@@ -0,0 +1,368 @@
+/*
+ * Modifications by Christian Pellegrin <chripell@evolware.org>
+ *
+ * s3c24xx_uda134x.c  --  S3C24XX_UDA134X ALSA SoC Audio board driver
+ *
+ * Copyright 2007 Dension Audio Systems Ltd.
+ * Author: Zoltan Devai
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/s3c24xx_uda134x.h>
+#include <sound/uda134x.h>
+
+#include <plat/regs-iis.h>
+
+#include "dma.h"
+#include "s3c24xx-i2s.h"
+#include "../codecs/uda134x.h"
+
+
+/* #define ENFORCE_RATES 1 */
+/*
+  Unfortunately the S3C24XX in master mode has a limited capacity of
+  generating the clock for the codec. If you define this only rates
+  that are really available will be enforced. But be careful, most
+  user level application just want the usual sampling frequencies (8,
+  11.025, 22.050, 44.1 kHz) and anyway resampling is a costly
+  operation for embedded systems. So if you aren't very lucky or your
+  hardware engineer wasn't very forward-looking it's better to leave
+  this undefined. If you do so an approximate value for the requested
+  sampling rate in the range -/+ 5% will be chosen. If this in not
+  possible an error will be returned.
+*/
+
+static struct clk *xtal;
+static struct clk *pclk;
+/* this is need because we don't have a place where to keep the
+ * pointers to the clocks in each substream. We get the clocks only
+ * when we are actually using them so we don't block stuff like
+ * frequency change or oscillator power-off */
+static int clk_users;
+static DEFINE_MUTEX(clk_lock);
+
+static unsigned int rates[33 * 2];
+#ifdef ENFORCE_RATES
+static struct snd_pcm_hw_constraint_list hw_constraints_rates = {
+	.count	= ARRAY_SIZE(rates),
+	.list	= rates,
+	.mask	= 0,
+};
+#endif
+
+static struct platform_device *s3c24xx_uda134x_snd_device;
+
+static int s3c24xx_uda134x_startup(struct snd_pcm_substream *substream)
+{
+	int ret = 0;
+#ifdef ENFORCE_RATES
+	struct snd_pcm_runtime *runtime = substream->runtime;
+#endif
+
+	mutex_lock(&clk_lock);
+	pr_debug("%s %d\n", __func__, clk_users);
+	if (clk_users == 0) {
+		xtal = clk_get(&s3c24xx_uda134x_snd_device->dev, "xtal");
+		if (!xtal) {
+			printk(KERN_ERR "%s cannot get xtal\n", __func__);
+			ret = -EBUSY;
+		} else {
+			pclk = clk_get(&s3c24xx_uda134x_snd_device->dev,
+				       "pclk");
+			if (!pclk) {
+				printk(KERN_ERR "%s cannot get pclk\n",
+				       __func__);
+				clk_put(xtal);
+				ret = -EBUSY;
+			}
+		}
+		if (!ret) {
+			int i, j;
+
+			for (i = 0; i < 2; i++) {
+				int fs = i ? 256 : 384;
+
+				rates[i*33] = clk_get_rate(xtal) / fs;
+				for (j = 1; j < 33; j++)
+					rates[i*33 + j] = clk_get_rate(pclk) /
+						(j * fs);
+			}
+		}
+	}
+	clk_users += 1;
+	mutex_unlock(&clk_lock);
+	if (!ret) {
+#ifdef ENFORCE_RATES
+		ret = snd_pcm_hw_constraint_list(runtime, 0,
+						 SNDRV_PCM_HW_PARAM_RATE,
+						 &hw_constraints_rates);
+		if (ret < 0)
+			printk(KERN_ERR "%s cannot set constraints\n",
+			       __func__);
+#endif
+	}
+	return ret;
+}
+
+static void s3c24xx_uda134x_shutdown(struct snd_pcm_substream *substream)
+{
+	mutex_lock(&clk_lock);
+	pr_debug("%s %d\n", __func__, clk_users);
+	clk_users -= 1;
+	if (clk_users == 0) {
+		clk_put(xtal);
+		xtal = NULL;
+		clk_put(pclk);
+		pclk = NULL;
+	}
+	mutex_unlock(&clk_lock);
+}
+
+static int s3c24xx_uda134x_hw_params(struct snd_pcm_substream *substream,
+					struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	unsigned int clk = 0;
+	int ret = 0;
+	int clk_source, fs_mode;
+	unsigned long rate = params_rate(params);
+	long err, cerr;
+	unsigned int div;
+	int i, bi;
+
+	err = 999999;
+	bi = 0;
+	for (i = 0; i < 2*33; i++) {
+		cerr = rates[i] - rate;
+		if (cerr < 0)
+			cerr = -cerr;
+		if (cerr < err) {
+			err = cerr;
+			bi = i;
+		}
+	}
+	if (bi / 33 == 1)
+		fs_mode = S3C2410_IISMOD_256FS;
+	else
+		fs_mode = S3C2410_IISMOD_384FS;
+	if (bi % 33 == 0) {
+		clk_source = S3C24XX_CLKSRC_MPLL;
+		div = 1;
+	} else {
+		clk_source = S3C24XX_CLKSRC_PCLK;
+		div = bi % 33;
+	}
+	pr_debug("%s desired rate %lu, %d\n", __func__, rate, bi);
+
+	clk = (fs_mode == S3C2410_IISMOD_384FS ? 384 : 256) * rate;
+	pr_debug("%s will use: %s %s %d sysclk %d err %ld\n", __func__,
+		 fs_mode == S3C2410_IISMOD_384FS ? "384FS" : "256FS",
+		 clk_source == S3C24XX_CLKSRC_MPLL ? "MPLLin" : "PCLK",
+		 div, clk, err);
+
+	if ((err * 100 / rate) > 5) {
+		printk(KERN_ERR "S3C24XX_UDA134X: effective frequency "
+		       "too different from desired (%ld%%)\n",
+		       err * 100 / rate);
+		return -EINVAL;
+	}
+
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+			SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+			SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source , clk,
+			SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, fs_mode);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK,
+			S3C2410_IISMOD_32FS);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
+			S3C24XX_PRESCALE(div, div));
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk,
+			SND_SOC_CLOCK_OUT);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct snd_soc_ops s3c24xx_uda134x_ops = {
+	.startup = s3c24xx_uda134x_startup,
+	.shutdown = s3c24xx_uda134x_shutdown,
+	.hw_params = s3c24xx_uda134x_hw_params,
+};
+
+static struct snd_soc_dai_link s3c24xx_uda134x_dai_link = {
+	.name = "UDA134X",
+	.stream_name = "UDA134X",
+	.codec_name = "uda134x-hifi",
+	.codec_dai_name = "uda134x-hifi",
+	.cpu_dai_name = "s3c24xx-i2s",
+	.ops = &s3c24xx_uda134x_ops,
+	.platform_name	= "samsung-audio",
+};
+
+static struct snd_soc_card snd_soc_s3c24xx_uda134x = {
+	.name = "S3C24XX_UDA134X",
+	.dai_link = &s3c24xx_uda134x_dai_link,
+	.num_links = 1,
+};
+
+static struct s3c24xx_uda134x_platform_data *s3c24xx_uda134x_l3_pins;
+
+static void setdat(int v)
+{
+	gpio_set_value(s3c24xx_uda134x_l3_pins->l3_data, v > 0);
+}
+
+static void setclk(int v)
+{
+	gpio_set_value(s3c24xx_uda134x_l3_pins->l3_clk, v > 0);
+}
+
+static void setmode(int v)
+{
+	gpio_set_value(s3c24xx_uda134x_l3_pins->l3_mode, v > 0);
+}
+
+/* FIXME - This must be codec platform data but in which board file ?? */
+static struct uda134x_platform_data s3c24xx_uda134x = {
+	.l3 = {
+		.setdat = setdat,
+		.setclk = setclk,
+		.setmode = setmode,
+		.data_hold = 1,
+		.data_setup = 1,
+		.clock_high = 1,
+		.mode_hold = 1,
+		.mode = 1,
+		.mode_setup = 1,
+	},
+};
+
+static int s3c24xx_uda134x_setup_pin(int pin, char *fun)
+{
+	if (gpio_request(pin, "s3c24xx_uda134x") < 0) {
+		printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
+		       "l3 %s pin already in use", fun);
+		return -EBUSY;
+	}
+	gpio_direction_output(pin, 0);
+	return 0;
+}
+
+static int s3c24xx_uda134x_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	printk(KERN_INFO "S3C24XX_UDA134X SoC Audio driver\n");
+
+	s3c24xx_uda134x_l3_pins = pdev->dev.platform_data;
+	if (s3c24xx_uda134x_l3_pins == NULL) {
+		printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
+		       "unable to find platform data\n");
+		return -ENODEV;
+	}
+	s3c24xx_uda134x.power = s3c24xx_uda134x_l3_pins->power;
+	s3c24xx_uda134x.model = s3c24xx_uda134x_l3_pins->model;
+
+	if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_data,
+				      "data") < 0)
+		return -EBUSY;
+	if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_clk,
+				      "clk") < 0) {
+		gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
+		return -EBUSY;
+	}
+	if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_mode,
+				      "mode") < 0) {
+		gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
+		gpio_free(s3c24xx_uda134x_l3_pins->l3_clk);
+		return -EBUSY;
+	}
+
+	s3c24xx_uda134x_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!s3c24xx_uda134x_snd_device) {
+		printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
+		       "Unable to register\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(s3c24xx_uda134x_snd_device,
+			     &snd_soc_s3c24xx_uda134x);
+	ret = platform_device_add(s3c24xx_uda134x_snd_device);
+	if (ret) {
+		printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: Unable to add\n");
+		platform_device_put(s3c24xx_uda134x_snd_device);
+	}
+
+	return ret;
+}
+
+static int s3c24xx_uda134x_remove(struct platform_device *pdev)
+{
+	platform_device_unregister(s3c24xx_uda134x_snd_device);
+	gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
+	gpio_free(s3c24xx_uda134x_l3_pins->l3_clk);
+	gpio_free(s3c24xx_uda134x_l3_pins->l3_mode);
+	return 0;
+}
+
+static struct platform_driver s3c24xx_uda134x_driver = {
+	.probe  = s3c24xx_uda134x_probe,
+	.remove = s3c24xx_uda134x_remove,
+	.driver = {
+		.name = "s3c24xx_uda134x",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init s3c24xx_uda134x_init(void)
+{
+	return platform_driver_register(&s3c24xx_uda134x_driver);
+}
+
+static void __exit s3c24xx_uda134x_exit(void)
+{
+	platform_driver_unregister(&s3c24xx_uda134x_driver);
+}
+
+
+module_init(s3c24xx_uda134x_init);
+module_exit(s3c24xx_uda134x_exit);
+
+MODULE_AUTHOR("Zoltan Devai, Christian Pellegrin <chripell@evolware.org>");
+MODULE_DESCRIPTION("S3C24XX_UDA134X ALSA SoC audio driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/samsung/smartq_wm8987.c b/sound/soc/samsung/smartq_wm8987.c
new file mode 100644
index 0000000..3564e00
--- /dev/null
+++ b/sound/soc/samsung/smartq_wm8987.c
@@ -0,0 +1,287 @@
+/* sound/soc/samsung/smartq_wm8987.c
+ *
+ * Copyright 2010 Maurus Cuelenaere <mcuelenaere@gmail.com>
+ *
+ * Based on smdk6410_wm8987.c
+ *     Copyright 2007 Wolfson Microelectronics PLC. - linux@wolfsonmicro.com
+ *     Graeme Gregory - graeme.gregory@wolfsonmicro.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc-dapm.h>
+#include <sound/jack.h>
+
+#include <asm/mach-types.h>
+
+#include "dma.h"
+#include "i2s.h"
+
+#include "../codecs/wm8750.h"
+
+/*
+ * WM8987 is register compatible with WM8750, so using that as base driver.
+ */
+
+static struct snd_soc_card snd_soc_smartq;
+
+static int smartq_hifi_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	unsigned int clk = 0;
+	int ret;
+
+	switch (params_rate(params)) {
+	case 8000:
+	case 16000:
+	case 32000:
+	case 48000:
+	case 96000:
+		clk = 12288000;
+		break;
+	case 11025:
+	case 22050:
+	case 44100:
+	case 88200:
+		clk = 11289600;
+		break;
+	}
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+					     SND_SOC_DAIFMT_NB_NF |
+					     SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+					   SND_SOC_DAIFMT_NB_NF |
+					   SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* Use PCLK for I2S signal generation */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_RCLKSRC_0,
+					0, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* Gate the RCLK output on PAD */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_CDCLK,
+					0, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/*
+ * SmartQ WM8987 HiFi DAI operations.
+ */
+static struct snd_soc_ops smartq_hifi_ops = {
+	.hw_params = smartq_hifi_hw_params,
+};
+
+static struct snd_soc_jack smartq_jack;
+
+static struct snd_soc_jack_pin smartq_jack_pins[] = {
+	/* Disable speaker when headphone is plugged in */
+	{
+		.pin	= "Internal Speaker",
+		.mask	= SND_JACK_HEADPHONE,
+	},
+};
+
+static struct snd_soc_jack_gpio smartq_jack_gpios[] = {
+	{
+		.gpio		= S3C64XX_GPL(12),
+		.name		= "headphone detect",
+		.report		= SND_JACK_HEADPHONE,
+		.debounce_time	= 200,
+	},
+};
+
+static const struct snd_kcontrol_new wm8987_smartq_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Internal Speaker"),
+	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
+	SOC_DAPM_PIN_SWITCH("Internal Mic"),
+};
+
+static int smartq_speaker_event(struct snd_soc_dapm_widget *w,
+				struct snd_kcontrol *k,
+				int event)
+{
+	gpio_set_value(S3C64XX_GPK(12), SND_SOC_DAPM_EVENT_OFF(event));
+
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget wm8987_dapm_widgets[] = {
+	SND_SOC_DAPM_SPK("Internal Speaker", smartq_speaker_event),
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_MIC("Internal Mic", NULL),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+	{"Headphone Jack", NULL, "LOUT2"},
+	{"Headphone Jack", NULL, "ROUT2"},
+
+	{"Internal Speaker", NULL, "LOUT2"},
+	{"Internal Speaker", NULL, "ROUT2"},
+
+	{"Mic Bias", NULL, "Internal Mic"},
+	{"LINPUT2", NULL, "Mic Bias"},
+};
+
+static int smartq_wm8987_init(struct snd_soc_codec *codec)
+{
+	int err = 0;
+
+	/* Add SmartQ specific widgets */
+	snd_soc_dapm_new_controls(codec, wm8987_dapm_widgets,
+				  ARRAY_SIZE(wm8987_dapm_widgets));
+
+	/* add SmartQ specific controls */
+	err = snd_soc_add_controls(codec, wm8987_smartq_controls,
+				   ARRAY_SIZE(wm8987_smartq_controls));
+
+	if (err < 0)
+		return err;
+
+	/* setup SmartQ specific audio path */
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+	/* set endpoints to not connected */
+	snd_soc_dapm_nc_pin(codec, "LINPUT1");
+	snd_soc_dapm_nc_pin(codec, "RINPUT1");
+	snd_soc_dapm_nc_pin(codec, "OUT3");
+	snd_soc_dapm_nc_pin(codec, "ROUT1");
+
+	/* set endpoints to default off mode */
+	snd_soc_dapm_enable_pin(codec, "Internal Speaker");
+	snd_soc_dapm_enable_pin(codec, "Internal Mic");
+	snd_soc_dapm_disable_pin(codec, "Headphone Jack");
+
+	err = snd_soc_dapm_sync(codec);
+	if (err)
+		return err;
+
+	/* Headphone jack detection */
+	err = snd_soc_jack_new(&snd_soc_smartq, "Headphone Jack",
+			       SND_JACK_HEADPHONE, &smartq_jack);
+	if (err)
+		return err;
+
+	err = snd_soc_jack_add_pins(&smartq_jack, ARRAY_SIZE(smartq_jack_pins),
+				    smartq_jack_pins);
+	if (err)
+		return err;
+
+	err = snd_soc_jack_add_gpios(&smartq_jack,
+				     ARRAY_SIZE(smartq_jack_gpios),
+				     smartq_jack_gpios);
+
+	return err;
+}
+
+static struct snd_soc_dai_link smartq_dai[] = {
+	{
+		.name		= "wm8987",
+		.stream_name	= "SmartQ Hi-Fi",
+		.cpu_dai_name	= "samsung-i2s.0",
+		.codec_dai_name	= "wm8750-hifi",
+		.platform_name	= "samsung-audio",
+		.codec_name	= "wm8750-codec.0-0x1a",
+		.init		= smartq_wm8987_init,
+		.ops		= &smartq_hifi_ops,
+	},
+};
+
+static struct snd_soc_card snd_soc_smartq = {
+	.name = "SmartQ",
+	.dai_link = smartq_dai,
+	.num_links = ARRAY_SIZE(smartq_dai),
+};
+
+static struct platform_device *smartq_snd_device;
+
+static int __init smartq_init(void)
+{
+	int ret;
+
+	if (!machine_is_smartq7() && !machine_is_smartq5()) {
+		pr_info("Only SmartQ is supported by this ASoC driver\n");
+		return -ENODEV;
+	}
+
+	smartq_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!smartq_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(smartq_snd_device, &snd_soc_smartq);
+
+	ret = platform_device_add(smartq_snd_device);
+	if (ret) {
+		platform_device_put(smartq_snd_device);
+		return ret;
+	}
+
+	/* Initialise GPIOs used by amplifiers */
+	ret = gpio_request(S3C64XX_GPK(12), "amplifiers shutdown");
+	if (ret) {
+		dev_err(&smartq_snd_device->dev, "Failed to register GPK12\n");
+		goto err_unregister_device;
+	}
+
+	/* Disable amplifiers */
+	ret = gpio_direction_output(S3C64XX_GPK(12), 1);
+	if (ret) {
+		dev_err(&smartq_snd_device->dev, "Failed to configure GPK12\n");
+		goto err_free_gpio_amp_shut;
+	}
+
+	return 0;
+
+err_free_gpio_amp_shut:
+	gpio_free(S3C64XX_GPK(12));
+err_unregister_device:
+	platform_device_unregister(smartq_snd_device);
+
+	return ret;
+}
+
+static void __exit smartq_exit(void)
+{
+	snd_soc_jack_free_gpios(&smartq_jack, ARRAY_SIZE(smartq_jack_gpios),
+				smartq_jack_gpios);
+
+	platform_device_unregister(smartq_snd_device);
+}
+
+module_init(smartq_init);
+module_exit(smartq_exit);
+
+/* Module information */
+MODULE_AUTHOR("Maurus Cuelenaere <mcuelenaere@gmail.com>");
+MODULE_DESCRIPTION("ALSA SoC SmartQ WM8987");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/samsung/smdk2443_wm9710.c b/sound/soc/samsung/smdk2443_wm9710.c
new file mode 100644
index 0000000..5051699
--- /dev/null
+++ b/sound/soc/samsung/smdk2443_wm9710.c
@@ -0,0 +1,74 @@
+/*
+ * smdk2443_wm9710.c  --  SoC audio for smdk2443
+ *
+ * Copyright 2007 Wolfson Microelectronics PLC.
+ * Author: Graeme Gregory
+ *         graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include "dma.h"
+#include "ac97.h"
+
+static struct snd_soc_card smdk2443;
+
+static struct snd_soc_dai_link smdk2443_dai[] = {
+{
+	.name = "AC97",
+	.stream_name = "AC97 HiFi",
+	.cpu_dai_name = "samsung-ac97",
+	.codec_dai_name = "ac97-hifi",
+	.codec_name = "ac97-codec",
+	.platform_name = "samsung-audio",
+},
+};
+
+static struct snd_soc_card smdk2443 = {
+	.name = "SMDK2443",
+	.dai_link = smdk2443_dai,
+	.num_links = ARRAY_SIZE(smdk2443_dai),
+};
+
+static struct platform_device *smdk2443_snd_ac97_device;
+
+static int __init smdk2443_init(void)
+{
+	int ret;
+
+	smdk2443_snd_ac97_device = platform_device_alloc("soc-audio", -1);
+	if (!smdk2443_snd_ac97_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(smdk2443_snd_ac97_device, &smdk2443);
+	ret = platform_device_add(smdk2443_snd_ac97_device);
+
+	if (ret)
+		platform_device_put(smdk2443_snd_ac97_device);
+
+	return ret;
+}
+
+static void __exit smdk2443_exit(void)
+{
+	platform_device_unregister(smdk2443_snd_ac97_device);
+}
+
+module_init(smdk2443_init);
+module_exit(smdk2443_exit);
+
+/* Module information */
+MODULE_AUTHOR("Graeme Gregory, graeme.gregory@wolfsonmicro.com, www.wolfsonmicro.com");
+MODULE_DESCRIPTION("ALSA SoC WM9710 SMDK2443");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/samsung/smdk_spdif.c b/sound/soc/samsung/smdk_spdif.c
new file mode 100644
index 0000000..4fc6a9f
--- /dev/null
+++ b/sound/soc/samsung/smdk_spdif.c
@@ -0,0 +1,223 @@
+/*
+ * smdk_spdif.c  --  S/PDIF audio for SMDK
+ *
+ * Copyright 2010 Samsung Electronics Co. Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+
+#include <plat/devs.h>
+
+#include <sound/soc.h>
+
+#include "dma.h"
+#include "spdif.h"
+
+/* Audio clock settings are belonged to board specific part. Every
+ * board can set audio source clock setting which is matched with H/W
+ * like this function-'set_audio_clock_heirachy'.
+ */
+static int set_audio_clock_heirachy(struct platform_device *pdev)
+{
+	struct clk *fout_epll, *mout_epll, *sclk_audio0, *sclk_spdif;
+	int ret;
+
+	fout_epll = clk_get(NULL, "fout_epll");
+	if (IS_ERR(fout_epll)) {
+		printk(KERN_WARNING "%s: Cannot find fout_epll.\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	mout_epll = clk_get(NULL, "mout_epll");
+	if (IS_ERR(fout_epll)) {
+		printk(KERN_WARNING "%s: Cannot find mout_epll.\n",
+				__func__);
+		ret = -EINVAL;
+		goto out1;
+	}
+
+	sclk_audio0 = clk_get(&pdev->dev, "sclk_audio");
+	if (IS_ERR(sclk_audio0)) {
+		printk(KERN_WARNING "%s: Cannot find sclk_audio.\n",
+				__func__);
+		ret = -EINVAL;
+		goto out2;
+	}
+
+	sclk_spdif = clk_get(NULL, "sclk_spdif");
+	if (IS_ERR(fout_epll)) {
+		printk(KERN_WARNING "%s: Cannot find sclk_spdif.\n",
+				__func__);
+		ret = -EINVAL;
+		goto out3;
+	}
+
+	/* Set audio clock heirachy for S/PDIF */
+	clk_set_parent(mout_epll, fout_epll);
+	clk_set_parent(sclk_audio0, mout_epll);
+	clk_set_parent(sclk_spdif, sclk_audio0);
+
+	clk_put(sclk_spdif);
+out3:
+	clk_put(sclk_audio0);
+out2:
+	clk_put(mout_epll);
+out1:
+	clk_put(fout_epll);
+
+	return ret;
+}
+
+/* We should haved to set clock directly on this part because of clock
+ * scheme of Samsudng SoCs did not support to set rates from abstrct
+ * clock of it's heirachy.
+ */
+static int set_audio_clock_rate(unsigned long epll_rate,
+				unsigned long audio_rate)
+{
+	struct clk *fout_epll, *sclk_spdif;
+
+	fout_epll = clk_get(NULL, "fout_epll");
+	if (IS_ERR(fout_epll)) {
+		printk(KERN_ERR "%s: failed to get fout_epll\n", __func__);
+		return -ENOENT;
+	}
+
+	clk_set_rate(fout_epll, epll_rate);
+	clk_put(fout_epll);
+
+	sclk_spdif = clk_get(NULL, "sclk_spdif");
+	if (IS_ERR(sclk_spdif)) {
+		printk(KERN_ERR "%s: failed to get sclk_spdif\n", __func__);
+		return -ENOENT;
+	}
+
+	clk_set_rate(sclk_spdif, audio_rate);
+	clk_put(sclk_spdif);
+
+	return 0;
+}
+
+static int smdk_hw_params(struct snd_pcm_substream *substream,
+		struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	unsigned long pll_out, rclk_rate;
+	int ret, ratio;
+
+	switch (params_rate(params)) {
+	case 44100:
+		pll_out = 45158400;
+		break;
+	case 32000:
+	case 48000:
+	case 96000:
+		pll_out = 49152000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Setting ratio to 512fs helps to use S/PDIF with HDMI without
+	 * modify S/PDIF ASoC machine driver.
+	 */
+	ratio = 512;
+	rclk_rate = params_rate(params) * ratio;
+
+	/* Set audio source clock rates */
+	ret = set_audio_clock_rate(pll_out, rclk_rate);
+	if (ret < 0)
+		return ret;
+
+	/* Set S/PDIF uses internal source clock */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, SND_SOC_SPDIF_INT_MCLK,
+					rclk_rate, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	return ret;
+}
+
+static struct snd_soc_ops smdk_spdif_ops = {
+	.hw_params = smdk_hw_params,
+};
+
+static struct snd_soc_card smdk;
+
+static struct snd_soc_dai_link smdk_dai = {
+	.name = "S/PDIF",
+	.stream_name = "S/PDIF PCM Playback",
+	.platform_name = "samsung-audio",
+	.cpu_dai_name = "samsung-spdif",
+	.codec_dai_name = "dit-hifi",
+	.codec_name = "spdif-dit",
+	.ops = &smdk_spdif_ops,
+};
+
+static struct snd_soc_card smdk = {
+	.name = "SMDK-S/PDIF",
+	.dai_link = &smdk_dai,
+	.num_links = 1,
+};
+
+static struct platform_device *smdk_snd_spdif_dit_device;
+static struct platform_device *smdk_snd_spdif_device;
+
+static int __init smdk_init(void)
+{
+	int ret;
+
+	smdk_snd_spdif_dit_device = platform_device_alloc("spdif-dit", -1);
+	if (!smdk_snd_spdif_dit_device)
+		return -ENOMEM;
+
+	ret = platform_device_add(smdk_snd_spdif_dit_device);
+	if (ret)
+		goto err2;
+
+	smdk_snd_spdif_device = platform_device_alloc("soc-audio", -1);
+	if (!smdk_snd_spdif_device) {
+		ret = -ENOMEM;
+		goto err2;
+	}
+
+	platform_set_drvdata(smdk_snd_spdif_device, &smdk);
+
+	ret = platform_device_add(smdk_snd_spdif_device);
+	if (ret)
+		goto err1;
+
+	/* Set audio clock heirachy manually */
+	ret = set_audio_clock_heirachy(smdk_snd_spdif_device);
+	if (ret)
+		goto err1;
+
+	return 0;
+err1:
+	platform_device_put(smdk_snd_spdif_device);
+err2:
+	platform_device_put(smdk_snd_spdif_dit_device);
+	return ret;
+}
+
+static void __exit smdk_exit(void)
+{
+	platform_device_unregister(smdk_snd_spdif_device);
+}
+
+module_init(smdk_init);
+module_exit(smdk_exit);
+
+MODULE_AUTHOR("Seungwhan Youn, <sw.youn@samsung.com>");
+MODULE_DESCRIPTION("ALSA SoC SMDK+S/PDIF");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/samsung/smdk_wm8580.c b/sound/soc/samsung/smdk_wm8580.c
new file mode 100644
index 0000000..46ab884
--- /dev/null
+++ b/sound/soc/samsung/smdk_wm8580.c
@@ -0,0 +1,284 @@
+/*
+ *  smdk_wm8580.c
+ *
+ *  Copyright (c) 2009 Samsung Electronics Co. Ltd
+ *  Author: Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+
+#include "../codecs/wm8580.h"
+#include "dma.h"
+#include "i2s.h"
+
+/*
+ * Default CFG switch settings to use this driver:
+ *
+ *   SMDK6410: Set CFG1 1-3 Off, CFG2 1-4 On
+ */
+
+/* SMDK has a 12MHZ crystal attached to WM8580 */
+#define SMDK_WM8580_FREQ 12000000
+
+static int smdk_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	unsigned int pll_out;
+	int bfs, rfs, ret;
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_U8:
+	case SNDRV_PCM_FORMAT_S8:
+		bfs = 16;
+		break;
+	case SNDRV_PCM_FORMAT_U16_LE:
+	case SNDRV_PCM_FORMAT_S16_LE:
+		bfs = 32;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* The Fvco for WM8580 PLLs must fall within [90,100]MHz.
+	 * This criterion can't be met if we request PLL output
+	 * as {8000x256, 64000x256, 11025x256}Hz.
+	 * As a wayout, we rather change rfs to a minimum value that
+	 * results in (params_rate(params) * rfs), and itself, acceptable
+	 * to both - the CODEC and the CPU.
+	 */
+	switch (params_rate(params)) {
+	case 16000:
+	case 22050:
+	case 32000:
+	case 44100:
+	case 48000:
+	case 88200:
+	case 96000:
+		rfs = 256;
+		break;
+	case 64000:
+		rfs = 384;
+		break;
+	case 8000:
+	case 11025:
+		rfs = 512;
+		break;
+	default:
+		return -EINVAL;
+	}
+	pll_out = params_rate(params) * rfs;
+
+	/* Set the Codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S
+					 | SND_SOC_DAIFMT_NB_NF
+					 | SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* Set the AP DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S
+					 | SND_SOC_DAIFMT_NB_NF
+					 | SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* Set WM8580 to drive MCLK from its PLLA */
+	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK,
+					WM8580_CLKSRC_PLLA);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_pll(codec_dai, WM8580_PLLA, 0,
+					SMDK_WM8580_FREQ, pll_out);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8580_CLKSRC_PLLA,
+				     pll_out, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/*
+ * SMDK WM8580 DAI operations.
+ */
+static struct snd_soc_ops smdk_ops = {
+	.hw_params = smdk_hw_params,
+};
+
+/* SMDK Playback widgets */
+static const struct snd_soc_dapm_widget wm8580_dapm_widgets_pbk[] = {
+	SND_SOC_DAPM_HP("Front", NULL),
+	SND_SOC_DAPM_HP("Center+Sub", NULL),
+	SND_SOC_DAPM_HP("Rear", NULL),
+};
+
+/* SMDK Capture widgets */
+static const struct snd_soc_dapm_widget wm8580_dapm_widgets_cpt[] = {
+	SND_SOC_DAPM_MIC("MicIn", NULL),
+	SND_SOC_DAPM_LINE("LineIn", NULL),
+};
+
+/* SMDK-PAIFTX connections */
+static const struct snd_soc_dapm_route audio_map_tx[] = {
+	/* MicIn feeds AINL */
+	{"AINL", NULL, "MicIn"},
+
+	/* LineIn feeds AINL/R */
+	{"AINL", NULL, "LineIn"},
+	{"AINR", NULL, "LineIn"},
+};
+
+/* SMDK-PAIFRX connections */
+static const struct snd_soc_dapm_route audio_map_rx[] = {
+	/* Front Left/Right are fed VOUT1L/R */
+	{"Front", NULL, "VOUT1L"},
+	{"Front", NULL, "VOUT1R"},
+
+	/* Center/Sub are fed VOUT2L/R */
+	{"Center+Sub", NULL, "VOUT2L"},
+	{"Center+Sub", NULL, "VOUT2R"},
+
+	/* Rear Left/Right are fed VOUT3L/R */
+	{"Rear", NULL, "VOUT3L"},
+	{"Rear", NULL, "VOUT3R"},
+};
+
+static int smdk_wm8580_init_paiftx(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+
+	/* Add smdk specific Capture widgets */
+	snd_soc_dapm_new_controls(codec, wm8580_dapm_widgets_cpt,
+				  ARRAY_SIZE(wm8580_dapm_widgets_cpt));
+
+	/* Set up PAIFTX audio path */
+	snd_soc_dapm_add_routes(codec, audio_map_tx, ARRAY_SIZE(audio_map_tx));
+
+	/* Enabling the microphone requires the fitting of a 0R
+	 * resistor to connect the line from the microphone jack.
+	 */
+	snd_soc_dapm_disable_pin(codec, "MicIn");
+
+	/* signal a DAPM event */
+	snd_soc_dapm_sync(codec);
+
+	return 0;
+}
+
+static int smdk_wm8580_init_paifrx(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+
+	/* Add smdk specific Playback widgets */
+	snd_soc_dapm_new_controls(codec, wm8580_dapm_widgets_pbk,
+				  ARRAY_SIZE(wm8580_dapm_widgets_pbk));
+
+	/* Set up PAIFRX audio path */
+	snd_soc_dapm_add_routes(codec, audio_map_rx, ARRAY_SIZE(audio_map_rx));
+
+	/* signal a DAPM event */
+	snd_soc_dapm_sync(codec);
+
+	return 0;
+}
+
+enum {
+	PRI_PLAYBACK = 0,
+	PRI_CAPTURE,
+	SEC_PLAYBACK,
+};
+
+static struct snd_soc_dai_link smdk_dai[] = {
+	[PRI_PLAYBACK] = { /* Primary Playback i/f */
+		.name = "WM8580 PAIF RX",
+		.stream_name = "Playback",
+		.cpu_dai_name = "samsung-i2s.2",
+		.codec_dai_name = "wm8580-hifi-playback",
+		.platform_name = "samsung-audio",
+		.codec_name = "wm8580-codec.0-001b",
+		.init = smdk_wm8580_init_paifrx,
+		.ops = &smdk_ops,
+	},
+	[PRI_CAPTURE] = { /* Primary Capture i/f */
+		.name = "WM8580 PAIF TX",
+		.stream_name = "Capture",
+		.cpu_dai_name = "samsung-i2s.2",
+		.codec_dai_name = "wm8580-hifi-capture",
+		.platform_name = "samsung-audio",
+		.codec_name = "wm8580-codec.0-001b",
+		.init = smdk_wm8580_init_paiftx,
+		.ops = &smdk_ops,
+	},
+	[SEC_PLAYBACK] = { /* Sec_Fifo Playback i/f */
+		.name = "Sec_FIFO TX",
+		.stream_name = "Playback",
+		.cpu_dai_name = "samsung-i2s.x",
+		.codec_dai_name = "wm8580-hifi-playback",
+		.platform_name = "samsung-audio",
+		.codec_name = "wm8580-codec.0-001b",
+		.init = smdk_wm8580_init_paifrx,
+		.ops = &smdk_ops,
+	},
+};
+
+static struct snd_soc_card smdk = {
+	.name = "SMDK-I2S",
+	.dai_link = smdk_dai,
+	.num_links = 2,
+};
+
+static struct platform_device *smdk_snd_device;
+
+static int __init smdk_audio_init(void)
+{
+	int ret;
+	char *str;
+
+	if (machine_is_smdkc100()) {
+		smdk.num_links = 3;
+		/* S5PC100 has I2S0 as v5 */
+		str = (char *)smdk_dai[PRI_PLAYBACK].cpu_dai_name;
+		str[strlen(str) - 1] = '0';
+		str = (char *)smdk_dai[PRI_CAPTURE].cpu_dai_name;
+		str[strlen(str) - 1] = '0';
+		/* Secondary is at offset MAX_I2S from Primary */
+		str = (char *)smdk_dai[SEC_PLAYBACK].cpu_dai_name;
+		str[strlen(str) - 1] = '0' + MAX_I2S;
+	}
+
+	smdk_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!smdk_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(smdk_snd_device, &smdk);
+	ret = platform_device_add(smdk_snd_device);
+
+	if (ret)
+		platform_device_put(smdk_snd_device);
+
+	return ret;
+}
+module_init(smdk_audio_init);
+
+MODULE_AUTHOR("Jaswinder Singh, jassi.brar@samsung.com");
+MODULE_DESCRIPTION("ALSA SoC SMDK WM8580");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/samsung/smdk_wm9713.c b/sound/soc/samsung/smdk_wm9713.c
new file mode 100644
index 0000000..7ce2430
--- /dev/null
+++ b/sound/soc/samsung/smdk_wm9713.c
@@ -0,0 +1,107 @@
+/*
+ * smdk_wm9713.c  --  SoC audio for SMDK
+ *
+ * Copyright 2010 Samsung Electronics Co. Ltd.
+ * Author: Jaswinder Singh Brar <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <sound/soc.h>
+
+#include "dma.h"
+#include "ac97.h"
+
+static struct snd_soc_card smdk;
+
+/*
+ * Default CFG switch settings to use this driver:
+ *
+ *   SMDK6410: Set CFG1 1-3 On, CFG2 1-4 Off
+ *   SMDKC100: Set CFG6 1-3 On, CFG7 1   On
+ *   SMDKC110: Set CFGB10 1-2 Off, CFGB12 1-3 On
+ *   SMDKV210: Set CFGB10 1-2 Off, CFGB12 1-3 On
+ */
+
+/*
+ Playback (HeadPhone):-
+	$ amixer sset 'Headphone' unmute
+	$ amixer sset 'Right Headphone Out Mux' 'Headphone'
+	$ amixer sset 'Left Headphone Out Mux' 'Headphone'
+	$ amixer sset 'Right HP Mixer PCM' unmute
+	$ amixer sset 'Left HP Mixer PCM' unmute
+
+ Capture (LineIn):-
+	$ amixer sset 'Right Capture Source' 'Line'
+	$ amixer sset 'Left Capture Source' 'Line'
+*/
+
+static struct snd_soc_dai_link smdk_dai = {
+	.name = "AC97",
+	.stream_name = "AC97 PCM",
+	.platform_name = "samsung-audio",
+	.cpu_dai_name = "samsung-ac97",
+	.codec_dai_name = "wm9713-hifi",
+	.codec_name = "wm9713-codec",
+};
+
+static struct snd_soc_card smdk = {
+	.name = "SMDK WM9713",
+	.dai_link = &smdk_dai,
+	.num_links = 1,
+};
+
+static struct platform_device *smdk_snd_wm9713_device;
+static struct platform_device *smdk_snd_ac97_device;
+
+static int __init smdk_init(void)
+{
+	int ret;
+
+	smdk_snd_wm9713_device = platform_device_alloc("wm9713-codec", -1);
+	if (!smdk_snd_wm9713_device)
+		return -ENOMEM;
+
+	ret = platform_device_add(smdk_snd_wm9713_device);
+	if (ret)
+		goto err;
+
+	smdk_snd_ac97_device = platform_device_alloc("soc-audio", -1);
+	if (!smdk_snd_ac97_device) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	platform_set_drvdata(smdk_snd_ac97_device, &smdk);
+
+	ret = platform_device_add(smdk_snd_ac97_device);
+	if (ret) {
+		platform_device_put(smdk_snd_ac97_device);
+		goto err;
+	}
+
+	return 0;
+err:
+	platform_device_put(smdk_snd_wm9713_device);
+	return ret;
+}
+
+static void __exit smdk_exit(void)
+{
+	platform_device_unregister(smdk_snd_ac97_device);
+	platform_device_unregister(smdk_snd_wm9713_device);
+}
+
+module_init(smdk_init);
+module_exit(smdk_exit);
+
+/* Module information */
+MODULE_AUTHOR("Jaswinder Singh Brar, jassi.brar@samsung.com");
+MODULE_DESCRIPTION("ALSA SoC SMDK+WM9713");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/samsung/spdif.c b/sound/soc/samsung/spdif.c
new file mode 100644
index 0000000..f081640
--- /dev/null
+++ b/sound/soc/samsung/spdif.c
@@ -0,0 +1,501 @@
+/* sound/soc/samsung/spdif.c
+ *
+ * ALSA SoC Audio Layer - Samsung S/PDIF Controller driver
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <plat/audio.h>
+#include <mach/dma.h>
+
+#include "dma.h"
+#include "spdif.h"
+
+/* Registers */
+#define CLKCON				0x00
+#define CON				0x04
+#define BSTAS				0x08
+#define CSTAS				0x0C
+#define DATA_OUTBUF			0x10
+#define DCNT				0x14
+#define BSTAS_S				0x18
+#define DCNT_S				0x1C
+
+#define CLKCTL_MASK			0x7
+#define CLKCTL_MCLK_EXT			(0x1 << 2)
+#define CLKCTL_PWR_ON			(0x1 << 0)
+
+#define CON_MASK			0x3ffffff
+#define CON_FIFO_TH_SHIFT		19
+#define CON_FIFO_TH_MASK		(0x7 << 19)
+#define CON_USERDATA_23RDBIT		(0x1 << 12)
+
+#define CON_SW_RESET			(0x1 << 5)
+
+#define CON_MCLKDIV_MASK		(0x3 << 3)
+#define CON_MCLKDIV_256FS		(0x0 << 3)
+#define CON_MCLKDIV_384FS		(0x1 << 3)
+#define CON_MCLKDIV_512FS		(0x2 << 3)
+
+#define CON_PCM_MASK			(0x3 << 1)
+#define CON_PCM_16BIT			(0x0 << 1)
+#define CON_PCM_20BIT			(0x1 << 1)
+#define CON_PCM_24BIT			(0x2 << 1)
+
+#define CON_PCM_DATA			(0x1 << 0)
+
+#define CSTAS_MASK			0x3fffffff
+#define CSTAS_SAMP_FREQ_MASK		(0xF << 24)
+#define CSTAS_SAMP_FREQ_44		(0x0 << 24)
+#define CSTAS_SAMP_FREQ_48		(0x2 << 24)
+#define CSTAS_SAMP_FREQ_32		(0x3 << 24)
+#define CSTAS_SAMP_FREQ_96		(0xA << 24)
+
+#define CSTAS_CATEGORY_MASK		(0xFF << 8)
+#define CSTAS_CATEGORY_CODE_CDP		(0x01 << 8)
+
+#define CSTAS_NO_COPYRIGHT		(0x1 << 2)
+
+/**
+ * struct samsung_spdif_info - Samsung S/PDIF Controller information
+ * @lock: Spin lock for S/PDIF.
+ * @dev: The parent device passed to use from the probe.
+ * @regs: The pointer to the device register block.
+ * @clk_rate: Current clock rate for calcurate ratio.
+ * @pclk: The peri-clock pointer for spdif master operation.
+ * @sclk: The source clock pointer for making sync signals.
+ * @save_clkcon: Backup clkcon reg. in suspend.
+ * @save_con: Backup con reg. in suspend.
+ * @save_cstas: Backup cstas reg. in suspend.
+ * @dma_playback: DMA information for playback channel.
+ */
+struct samsung_spdif_info {
+	spinlock_t	lock;
+	struct device	*dev;
+	void __iomem	*regs;
+	unsigned long	clk_rate;
+	struct clk	*pclk;
+	struct clk	*sclk;
+	u32		saved_clkcon;
+	u32		saved_con;
+	u32		saved_cstas;
+	struct s3c_dma_params	*dma_playback;
+};
+
+static struct s3c2410_dma_client spdif_dma_client_out = {
+	.name		= "S/PDIF Stereo out",
+};
+
+static struct s3c_dma_params spdif_stereo_out;
+static struct samsung_spdif_info spdif_info;
+
+static inline struct samsung_spdif_info *to_info(struct snd_soc_dai *cpu_dai)
+{
+	return snd_soc_dai_get_drvdata(cpu_dai);
+}
+
+static void spdif_snd_txctrl(struct samsung_spdif_info *spdif, int on)
+{
+	void __iomem *regs = spdif->regs;
+	u32 clkcon;
+
+	dev_dbg(spdif->dev, "Entered %s\n", __func__);
+
+	clkcon = readl(regs + CLKCON) & CLKCTL_MASK;
+	if (on)
+		writel(clkcon | CLKCTL_PWR_ON, regs + CLKCON);
+	else
+		writel(clkcon & ~CLKCTL_PWR_ON, regs + CLKCON);
+}
+
+static int spdif_set_sysclk(struct snd_soc_dai *cpu_dai,
+				int clk_id, unsigned int freq, int dir)
+{
+	struct samsung_spdif_info *spdif = to_info(cpu_dai);
+	u32 clkcon;
+
+	dev_dbg(spdif->dev, "Entered %s\n", __func__);
+
+	clkcon = readl(spdif->regs + CLKCON);
+
+	if (clk_id == SND_SOC_SPDIF_INT_MCLK)
+		clkcon &= ~CLKCTL_MCLK_EXT;
+	else
+		clkcon |= CLKCTL_MCLK_EXT;
+
+	writel(clkcon, spdif->regs + CLKCON);
+
+	spdif->clk_rate = freq;
+
+	return 0;
+}
+
+static int spdif_trigger(struct snd_pcm_substream *substream, int cmd,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct samsung_spdif_info *spdif = to_info(rtd->cpu_dai);
+	unsigned long flags;
+
+	dev_dbg(spdif->dev, "Entered %s\n", __func__);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		spin_lock_irqsave(&spdif->lock, flags);
+		spdif_snd_txctrl(spdif, 1);
+		spin_unlock_irqrestore(&spdif->lock, flags);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		spin_lock_irqsave(&spdif->lock, flags);
+		spdif_snd_txctrl(spdif, 0);
+		spin_unlock_irqrestore(&spdif->lock, flags);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int spdif_sysclk_ratios[] = {
+	512, 384, 256,
+};
+
+static int spdif_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params,
+				struct snd_soc_dai *socdai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct samsung_spdif_info *spdif = to_info(rtd->cpu_dai);
+	void __iomem *regs = spdif->regs;
+	struct s3c_dma_params *dma_data;
+	u32 con, clkcon, cstas;
+	unsigned long flags;
+	int i, ratio;
+
+	dev_dbg(spdif->dev, "Entered %s\n", __func__);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dma_data = spdif->dma_playback;
+	else {
+		dev_err(spdif->dev, "Capture is not supported\n");
+		return -EINVAL;
+	}
+
+	snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_data);
+
+	spin_lock_irqsave(&spdif->lock, flags);
+
+	con = readl(regs + CON) & CON_MASK;
+	cstas = readl(regs + CSTAS) & CSTAS_MASK;
+	clkcon = readl(regs + CLKCON) & CLKCTL_MASK;
+
+	con &= ~CON_FIFO_TH_MASK;
+	con |= (0x7 << CON_FIFO_TH_SHIFT);
+	con |= CON_USERDATA_23RDBIT;
+	con |= CON_PCM_DATA;
+
+	con &= ~CON_PCM_MASK;
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		con |= CON_PCM_16BIT;
+		break;
+	default:
+		dev_err(spdif->dev, "Unsupported data size.\n");
+		goto err;
+	}
+
+	ratio = spdif->clk_rate / params_rate(params);
+	for (i = 0; i < ARRAY_SIZE(spdif_sysclk_ratios); i++)
+		if (ratio == spdif_sysclk_ratios[i])
+			break;
+	if (i == ARRAY_SIZE(spdif_sysclk_ratios)) {
+		dev_err(spdif->dev, "Invalid clock ratio %ld/%d\n",
+				spdif->clk_rate, params_rate(params));
+		goto err;
+	}
+
+	con &= ~CON_MCLKDIV_MASK;
+	switch (ratio) {
+	case 256:
+		con |= CON_MCLKDIV_256FS;
+		break;
+	case 384:
+		con |= CON_MCLKDIV_384FS;
+		break;
+	case 512:
+		con |= CON_MCLKDIV_512FS;
+		break;
+	}
+
+	cstas &= ~CSTAS_SAMP_FREQ_MASK;
+	switch (params_rate(params)) {
+	case 44100:
+		cstas |= CSTAS_SAMP_FREQ_44;
+		break;
+	case 48000:
+		cstas |= CSTAS_SAMP_FREQ_48;
+		break;
+	case 32000:
+		cstas |= CSTAS_SAMP_FREQ_32;
+		break;
+	case 96000:
+		cstas |= CSTAS_SAMP_FREQ_96;
+		break;
+	default:
+		dev_err(spdif->dev, "Invalid sampling rate %d\n",
+				params_rate(params));
+		goto err;
+	}
+
+	cstas &= ~CSTAS_CATEGORY_MASK;
+	cstas |= CSTAS_CATEGORY_CODE_CDP;
+	cstas |= CSTAS_NO_COPYRIGHT;
+
+	writel(con, regs + CON);
+	writel(cstas, regs + CSTAS);
+	writel(clkcon, regs + CLKCON);
+
+	spin_unlock_irqrestore(&spdif->lock, flags);
+
+	return 0;
+err:
+	spin_unlock_irqrestore(&spdif->lock, flags);
+	return -EINVAL;
+}
+
+static void spdif_shutdown(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct samsung_spdif_info *spdif = to_info(rtd->cpu_dai);
+	void __iomem *regs = spdif->regs;
+	u32 con, clkcon;
+
+	dev_dbg(spdif->dev, "Entered %s\n", __func__);
+
+	con = readl(regs + CON) & CON_MASK;
+	clkcon = readl(regs + CLKCON) & CLKCTL_MASK;
+
+	writel(con | CON_SW_RESET, regs + CON);
+	cpu_relax();
+
+	writel(clkcon & ~CLKCTL_PWR_ON, regs + CLKCON);
+}
+
+#ifdef CONFIG_PM
+static int spdif_suspend(struct snd_soc_dai *cpu_dai)
+{
+	struct samsung_spdif_info *spdif = to_info(cpu_dai);
+	u32 con = spdif->saved_con;
+
+	dev_dbg(spdif->dev, "Entered %s\n", __func__);
+
+	spdif->saved_clkcon = readl(spdif->regs	+ CLKCON) & CLKCTL_MASK;
+	spdif->saved_con = readl(spdif->regs + CON) & CON_MASK;
+	spdif->saved_cstas = readl(spdif->regs + CSTAS) & CSTAS_MASK;
+
+	writel(con | CON_SW_RESET, spdif->regs + CON);
+	cpu_relax();
+
+	return 0;
+}
+
+static int spdif_resume(struct snd_soc_dai *cpu_dai)
+{
+	struct samsung_spdif_info *spdif = to_info(cpu_dai);
+
+	dev_dbg(spdif->dev, "Entered %s\n", __func__);
+
+	writel(spdif->saved_clkcon, spdif->regs	+ CLKCON);
+	writel(spdif->saved_con, spdif->regs + CON);
+	writel(spdif->saved_cstas, spdif->regs + CSTAS);
+
+	return 0;
+}
+#else
+#define spdif_suspend NULL
+#define spdif_resume NULL
+#endif
+
+static struct snd_soc_dai_ops spdif_dai_ops = {
+	.set_sysclk	= spdif_set_sysclk,
+	.trigger	= spdif_trigger,
+	.hw_params	= spdif_hw_params,
+	.shutdown	= spdif_shutdown,
+};
+
+struct snd_soc_dai_driver samsung_spdif_dai = {
+	.name = "samsung-spdif",
+	.playback = {
+		.stream_name = "S/PDIF Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = (SNDRV_PCM_RATE_32000 |
+				SNDRV_PCM_RATE_44100 |
+				SNDRV_PCM_RATE_48000 |
+				SNDRV_PCM_RATE_96000),
+		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
+	.ops = &spdif_dai_ops,
+	.suspend = spdif_suspend,
+	.resume = spdif_resume,
+};
+
+static __devinit int spdif_probe(struct platform_device *pdev)
+{
+	struct s3c_audio_pdata *spdif_pdata;
+	struct resource *mem_res, *dma_res;
+	struct samsung_spdif_info *spdif;
+	int ret;
+
+	spdif_pdata = pdev->dev.platform_data;
+
+	dev_dbg(&pdev->dev, "Entered %s\n", __func__);
+
+	dma_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!dma_res) {
+		dev_err(&pdev->dev, "Unable to get dma resource.\n");
+		return -ENXIO;
+	}
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem_res) {
+		dev_err(&pdev->dev, "Unable to get register resource.\n");
+		return -ENXIO;
+	}
+
+	if (spdif_pdata && spdif_pdata->cfg_gpio
+			&& spdif_pdata->cfg_gpio(pdev)) {
+		dev_err(&pdev->dev, "Unable to configure GPIO pins\n");
+		return -EINVAL;
+	}
+
+	spdif = &spdif_info;
+	spdif->dev = &pdev->dev;
+
+	spin_lock_init(&spdif->lock);
+
+	spdif->pclk = clk_get(&pdev->dev, "spdif");
+	if (IS_ERR(spdif->pclk)) {
+		dev_err(&pdev->dev, "failed to get peri-clock\n");
+		ret = -ENOENT;
+		goto err0;
+	}
+	clk_enable(spdif->pclk);
+
+	spdif->sclk = clk_get(&pdev->dev, "sclk_spdif");
+	if (IS_ERR(spdif->sclk)) {
+		dev_err(&pdev->dev, "failed to get internal source clock\n");
+		ret = -ENOENT;
+		goto err1;
+	}
+	clk_enable(spdif->sclk);
+
+	/* Request S/PDIF Register's memory region */
+	if (!request_mem_region(mem_res->start,
+				resource_size(mem_res), "samsung-spdif")) {
+		dev_err(&pdev->dev, "Unable to request register region\n");
+		ret = -EBUSY;
+		goto err2;
+	}
+
+	spdif->regs = ioremap(mem_res->start, 0x100);
+	if (spdif->regs == NULL) {
+		dev_err(&pdev->dev, "Cannot ioremap registers\n");
+		ret = -ENXIO;
+		goto err3;
+	}
+
+	dev_set_drvdata(&pdev->dev, spdif);
+
+	ret = snd_soc_register_dai(&pdev->dev, &samsung_spdif_dai);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "fail to register dai\n");
+		goto err4;
+	}
+
+	spdif_stereo_out.dma_size = 2;
+	spdif_stereo_out.client = &spdif_dma_client_out;
+	spdif_stereo_out.dma_addr = mem_res->start + DATA_OUTBUF;
+	spdif_stereo_out.channel = dma_res->start;
+
+	spdif->dma_playback = &spdif_stereo_out;
+
+	return 0;
+
+err4:
+	iounmap(spdif->regs);
+err3:
+	release_mem_region(mem_res->start, resource_size(mem_res));
+err2:
+	clk_disable(spdif->sclk);
+	clk_put(spdif->sclk);
+err1:
+	clk_disable(spdif->pclk);
+	clk_put(spdif->pclk);
+err0:
+	return ret;
+}
+
+static __devexit int spdif_remove(struct platform_device *pdev)
+{
+	struct samsung_spdif_info *spdif = &spdif_info;
+	struct resource *mem_res;
+
+	snd_soc_unregister_dai(&pdev->dev);
+
+	iounmap(spdif->regs);
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (mem_res)
+		release_mem_region(mem_res->start, resource_size(mem_res));
+
+	clk_disable(spdif->sclk);
+	clk_put(spdif->sclk);
+	clk_disable(spdif->pclk);
+	clk_put(spdif->pclk);
+
+	return 0;
+}
+
+static struct platform_driver samsung_spdif_driver = {
+	.probe	= spdif_probe,
+	.remove	= spdif_remove,
+	.driver	= {
+		.name	= "samsung-spdif",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init spdif_init(void)
+{
+	return platform_driver_register(&samsung_spdif_driver);
+}
+module_init(spdif_init);
+
+static void __exit spdif_exit(void)
+{
+	platform_driver_unregister(&samsung_spdif_driver);
+}
+module_exit(spdif_exit);
+
+MODULE_AUTHOR("Seungwhan Youn, <sw.youn@samsung.com>");
+MODULE_DESCRIPTION("Samsung S/PDIF Controller Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-spdif");
diff --git a/sound/soc/samsung/spdif.h b/sound/soc/samsung/spdif.h
new file mode 100644
index 0000000..4f72cb4
--- /dev/null
+++ b/sound/soc/samsung/spdif.h
@@ -0,0 +1,19 @@
+/* sound/soc/samsung/spdif.h
+ *
+ * ALSA SoC Audio Layer - Samsung S/PDIF Controller driver
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SND_SOC_SAMSUNG_SPDIF_H
+#define __SND_SOC_SAMSUNG_SPDIF_H	__FILE__
+
+#define SND_SOC_SPDIF_INT_MCLK		0
+#define SND_SOC_SPDIF_EXT_MCLK		1
+
+#endif	/* __SND_SOC_SAMSUNG_SPDIF_H */
-- 
1.6.2.5

Re: [PATCH 25/25] ASoC: Samsung: Rename from s3c24xx to samsung

[Mark Brown]

On Tue, Oct 19, 2010 at 04:09:13PM +0900, Jassi Brar wrote:
> From: Jassi Brar <jassi.brar@samsung.com>
> 
> Finally, move the 's3c24xx' directory to 'samsung'
> 
> Signed-off-by: Jassi Brar <jassi.brar@samsung.com>

git format-patch -M is your friend :)

Re: [PATCH 25/25] ASoC: Samsung: Rename from s3c24xx to samsung

[Jassi Brar]

On Tue, Oct 19, 2010 at 5:16 PM, Mark Brown
<broonie@opensource.wolfsonmicro.com> wrote:
> On Tue, Oct 19, 2010 at 04:09:13PM +0900, Jassi Brar wrote:
>> From: Jassi Brar <jassi.brar@samsung.com>
>>
>> Finally, move the 's3c24xx' directory to 'samsung'
>>
>> Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
>
> git format-patch -M is your friend :)

I think having -M as the default option for format-patch would be great
for dummies like me.

[PATCH 25/25] ASoC: Samsung: Rename from s3c24xx to samsung

[Jassi Brar]

From: Jassi Brar <jassi.brar@samsung.com>

Finally, move the 's3c24xx' directory to 'samsung'

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
---
 sound/soc/Kconfig                                  |    2 +-
 sound/soc/Makefile                                 |    2 +-
 sound/soc/{s3c24xx => samsung}/Kconfig             |    0
 sound/soc/{s3c24xx => samsung}/Makefile            |    0
 sound/soc/{s3c24xx => samsung}/ac97.c              |    2 +-
 sound/soc/{s3c24xx => samsung}/ac97.h              |    2 +-
 sound/soc/{s3c24xx => samsung}/dma.c               |    0
 sound/soc/{s3c24xx => samsung}/dma.h               |    0
 sound/soc/{s3c24xx => samsung}/goni_wm8994.c       |    0
 sound/soc/{s3c24xx => samsung}/i2s.c               |    2 +-
 sound/soc/{s3c24xx => samsung}/i2s.h               |    2 +-
 sound/soc/{s3c24xx => samsung}/jive_wm8750.c       |    2 +-
 sound/soc/{s3c24xx => samsung}/lm4857.h            |    0
 sound/soc/{s3c24xx => samsung}/ln2440sbc_alc650.c  |    0
 .../{s3c24xx => samsung}/neo1973_gta02_wm8753.c    |    0
 sound/soc/{s3c24xx => samsung}/neo1973_wm8753.c    |    0
 sound/soc/{s3c24xx => samsung}/pcm.c               |    2 +-
 sound/soc/{s3c24xx => samsung}/pcm.h               |    2 +-
 sound/soc/{s3c24xx => samsung}/regs-i2s-v2.h       |    0
 sound/soc/{s3c24xx => samsung}/rx1950_uda1380.c    |    0
 sound/soc/{s3c24xx => samsung}/s3c-i2s-v2.c        |    2 +-
 sound/soc/{s3c24xx => samsung}/s3c-i2s-v2.h        |    2 +-
 sound/soc/{s3c24xx => samsung}/s3c2412-i2s.c       |    2 +-
 sound/soc/{s3c24xx => samsung}/s3c2412-i2s.h       |    2 +-
 sound/soc/{s3c24xx => samsung}/s3c24xx-i2s.c       |    0
 sound/soc/{s3c24xx => samsung}/s3c24xx-i2s.h       |    0
 sound/soc/{s3c24xx => samsung}/s3c24xx_simtec.c    |    2 +-
 sound/soc/{s3c24xx => samsung}/s3c24xx_simtec.h    |    2 +-
 .../{s3c24xx => samsung}/s3c24xx_simtec_hermes.c   |    2 +-
 .../s3c24xx_simtec_tlv320aic23.c                   |    2 +-
 sound/soc/{s3c24xx => samsung}/s3c24xx_uda134x.c   |    0
 sound/soc/{s3c24xx => samsung}/smartq_wm8987.c     |    2 +-
 sound/soc/{s3c24xx => samsung}/smdk2443_wm9710.c   |    0
 sound/soc/{s3c24xx => samsung}/smdk_spdif.c        |    0
 sound/soc/{s3c24xx => samsung}/smdk_wm8580.c       |    0
 sound/soc/{s3c24xx => samsung}/smdk_wm9713.c       |    0
 sound/soc/{s3c24xx => samsung}/spdif.c             |    2 +-
 sound/soc/{s3c24xx => samsung}/spdif.h             |    2 +-
 38 files changed, 20 insertions(+), 20 deletions(-)
 rename sound/soc/{s3c24xx => samsung}/Kconfig (100%)
 rename sound/soc/{s3c24xx => samsung}/Makefile (100%)
 rename sound/soc/{s3c24xx => samsung}/ac97.c (99%)
 rename sound/soc/{s3c24xx => samsung}/ac97.h (95%)
 rename sound/soc/{s3c24xx => samsung}/dma.c (100%)
 rename sound/soc/{s3c24xx => samsung}/dma.h (100%)
 rename sound/soc/{s3c24xx => samsung}/goni_wm8994.c (100%)
 rename sound/soc/{s3c24xx => samsung}/i2s.c (99%)
 rename sound/soc/{s3c24xx => samsung}/i2s.h (96%)
 rename sound/soc/{s3c24xx => samsung}/jive_wm8750.c (99%)
 rename sound/soc/{s3c24xx => samsung}/lm4857.h (100%)
 rename sound/soc/{s3c24xx => samsung}/ln2440sbc_alc650.c (100%)
 rename sound/soc/{s3c24xx => samsung}/neo1973_gta02_wm8753.c (100%)
 rename sound/soc/{s3c24xx => samsung}/neo1973_wm8753.c (100%)
 rename sound/soc/{s3c24xx => samsung}/pcm.c (99%)
 rename sound/soc/{s3c24xx => samsung}/pcm.h (99%)
 rename sound/soc/{s3c24xx => samsung}/regs-i2s-v2.h (100%)
 rename sound/soc/{s3c24xx => samsung}/rx1950_uda1380.c (100%)
 rename sound/soc/{s3c24xx => samsung}/s3c-i2s-v2.c (99%)
 rename sound/soc/{s3c24xx => samsung}/s3c-i2s-v2.h (98%)
 rename sound/soc/{s3c24xx => samsung}/s3c2412-i2s.c (99%)
 rename sound/soc/{s3c24xx => samsung}/s3c2412-i2s.h (95%)
 rename sound/soc/{s3c24xx => samsung}/s3c24xx-i2s.c (100%)
 rename sound/soc/{s3c24xx => samsung}/s3c24xx-i2s.h (100%)
 rename sound/soc/{s3c24xx => samsung}/s3c24xx_simtec.c (99%)
 rename sound/soc/{s3c24xx => samsung}/s3c24xx_simtec.h (94%)
 rename sound/soc/{s3c24xx => samsung}/s3c24xx_simtec_hermes.c (98%)
 rename sound/soc/{s3c24xx => samsung}/s3c24xx_simtec_tlv320aic23.c (98%)
 rename sound/soc/{s3c24xx => samsung}/s3c24xx_uda134x.c (100%)
 rename sound/soc/{s3c24xx => samsung}/smartq_wm8987.c (99%)
 rename sound/soc/{s3c24xx => samsung}/smdk2443_wm9710.c (100%)
 rename sound/soc/{s3c24xx => samsung}/smdk_spdif.c (100%)
 rename sound/soc/{s3c24xx => samsung}/smdk_wm8580.c (100%)
 rename sound/soc/{s3c24xx => samsung}/smdk_wm9713.c (100%)
 rename sound/soc/{s3c24xx => samsung}/spdif.c (99%)
 rename sound/soc/{s3c24xx => samsung}/spdif.h (94%)

diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
index 3e598e7..2722b19 100644
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
@@ -36,7 +36,7 @@ source "sound/soc/nuc900/Kconfig"
 source "sound/soc/omap/Kconfig"
 source "sound/soc/kirkwood/Kconfig"
 source "sound/soc/pxa/Kconfig"
-source "sound/soc/s3c24xx/Kconfig"
+source "sound/soc/samsung/Kconfig"
 source "sound/soc/s6000/Kconfig"
 source "sound/soc/sh/Kconfig"
 source "sound/soc/txx9/Kconfig"
diff --git a/sound/soc/Makefile b/sound/soc/Makefile
index eb18344..ce913bf 100644
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
@@ -14,7 +14,7 @@ obj-$(CONFIG_SND_SOC)	+= nuc900/
 obj-$(CONFIG_SND_SOC)	+= omap/
 obj-$(CONFIG_SND_SOC)	+= kirkwood/
 obj-$(CONFIG_SND_SOC)	+= pxa/
-obj-$(CONFIG_SND_SOC)	+= s3c24xx/
+obj-$(CONFIG_SND_SOC)	+= samsung/
 obj-$(CONFIG_SND_SOC)	+= s6000/
 obj-$(CONFIG_SND_SOC)	+= sh/
 obj-$(CONFIG_SND_SOC)	+= txx9/
diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/samsung/Kconfig
similarity index 100%
rename from sound/soc/s3c24xx/Kconfig
rename to sound/soc/samsung/Kconfig
diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/samsung/Makefile
similarity index 100%
rename from sound/soc/s3c24xx/Makefile
rename to sound/soc/samsung/Makefile
diff --git a/sound/soc/s3c24xx/ac97.c b/sound/soc/samsung/ac97.c
similarity index 99%
rename from sound/soc/s3c24xx/ac97.c
rename to sound/soc/samsung/ac97.c
index 4f999d1..4770a95 100644
--- a/sound/soc/s3c24xx/ac97.c
+++ b/sound/soc/samsung/ac97.c
@@ -1,4 +1,4 @@
-/* sound/soc/s3c24xx/ac97.c
+/* sound/soc/samsung/ac97.c
  *
  * ALSA SoC Audio Layer - S3C AC97 Controller driver
  * 	Evolved from s3c2443-ac97.c
diff --git a/sound/soc/s3c24xx/ac97.h b/sound/soc/samsung/ac97.h
similarity index 95%
rename from sound/soc/s3c24xx/ac97.h
rename to sound/soc/samsung/ac97.h
index a8f01b7..0d0e1b5 100644
--- a/sound/soc/s3c24xx/ac97.h
+++ b/sound/soc/samsung/ac97.h
@@ -1,4 +1,4 @@
-/* sound/soc/s3c24xx/ac97.h
+/* sound/soc/samsung/ac97.h
  *
  * ALSA SoC Audio Layer - S3C AC97 Controller driver
  *	Evolved from s3c2443-ac97.h
diff --git a/sound/soc/s3c24xx/dma.c b/sound/soc/samsung/dma.c
similarity index 100%
rename from sound/soc/s3c24xx/dma.c
rename to sound/soc/samsung/dma.c
diff --git a/sound/soc/s3c24xx/dma.h b/sound/soc/samsung/dma.h
similarity index 100%
rename from sound/soc/s3c24xx/dma.h
rename to sound/soc/samsung/dma.h
diff --git a/sound/soc/s3c24xx/goni_wm8994.c b/sound/soc/samsung/goni_wm8994.c
similarity index 100%
rename from sound/soc/s3c24xx/goni_wm8994.c
rename to sound/soc/samsung/goni_wm8994.c
diff --git a/sound/soc/s3c24xx/i2s.c b/sound/soc/samsung/i2s.c
similarity index 99%
rename from sound/soc/s3c24xx/i2s.c
rename to sound/soc/samsung/i2s.c
index 6869f51..d5d8975 100644
--- a/sound/soc/s3c24xx/i2s.c
+++ b/sound/soc/samsung/i2s.c
@@ -1,4 +1,4 @@
-/* sound/soc/s3c24xx/i2s.c
+/* sound/soc/samsung/i2s.c
  *
  * ALSA SoC Audio Layer - Samsung I2S Controller driver
  *
diff --git a/sound/soc/s3c24xx/i2s.h b/sound/soc/samsung/i2s.h
similarity index 96%
rename from sound/soc/s3c24xx/i2s.h
rename to sound/soc/samsung/i2s.h
index 77b7965..73a71cd 100644
--- a/sound/soc/s3c24xx/i2s.h
+++ b/sound/soc/samsung/i2s.h
@@ -1,4 +1,4 @@
-/* sound/soc/s3c24xx/i2s.h
+/* sound/soc/samsung/i2s.h
  *
  * ALSA SoC Audio Layer - Samsung I2S Controller driver
  *
diff --git a/sound/soc/s3c24xx/jive_wm8750.c b/sound/soc/samsung/jive_wm8750.c
similarity index 99%
rename from sound/soc/s3c24xx/jive_wm8750.c
rename to sound/soc/samsung/jive_wm8750.c
index 4e1b8ac..fe1649e 100644
--- a/sound/soc/s3c24xx/jive_wm8750.c
+++ b/sound/soc/samsung/jive_wm8750.c
@@ -1,4 +1,4 @@
-/* sound/soc/s3c24xx/jive_wm8750.c
+/* sound/soc/samsung/jive_wm8750.c
  *
  * Copyright 2007,2008 Simtec Electronics
  *
diff --git a/sound/soc/s3c24xx/lm4857.h b/sound/soc/samsung/lm4857.h
similarity index 100%
rename from sound/soc/s3c24xx/lm4857.h
rename to sound/soc/samsung/lm4857.h
diff --git a/sound/soc/s3c24xx/ln2440sbc_alc650.c b/sound/soc/samsung/ln2440sbc_alc650.c
similarity index 100%
rename from sound/soc/s3c24xx/ln2440sbc_alc650.c
rename to sound/soc/samsung/ln2440sbc_alc650.c
diff --git a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c b/sound/soc/samsung/neo1973_gta02_wm8753.c
similarity index 100%
rename from sound/soc/s3c24xx/neo1973_gta02_wm8753.c
rename to sound/soc/samsung/neo1973_gta02_wm8753.c
diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c
similarity index 100%
rename from sound/soc/s3c24xx/neo1973_wm8753.c
rename to sound/soc/samsung/neo1973_wm8753.c
diff --git a/sound/soc/s3c24xx/pcm.c b/sound/soc/samsung/pcm.c
similarity index 99%
rename from sound/soc/s3c24xx/pcm.c
rename to sound/soc/samsung/pcm.c
index 4d0f6e4..48d0b75 100644
--- a/sound/soc/s3c24xx/pcm.c
+++ b/sound/soc/samsung/pcm.c
@@ -1,4 +1,4 @@
-/* sound/soc/s3c24xx/pcm.c
+/* sound/soc/samsung/pcm.c
  *
  * ALSA SoC Audio Layer - S3C PCM-Controller driver
  *
diff --git a/sound/soc/s3c24xx/pcm.h b/sound/soc/samsung/pcm.h
similarity index 99%
rename from sound/soc/s3c24xx/pcm.h
rename to sound/soc/samsung/pcm.h
index 3775216..03393dc 100644
--- a/sound/soc/s3c24xx/pcm.h
+++ b/sound/soc/samsung/pcm.h
@@ -1,4 +1,4 @@
-/*  sound/soc/s3c24xx/pcm.h
+/*  sound/soc/samsung/pcm.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/sound/soc/s3c24xx/regs-i2s-v2.h b/sound/soc/samsung/regs-i2s-v2.h
similarity index 100%
rename from sound/soc/s3c24xx/regs-i2s-v2.h
rename to sound/soc/samsung/regs-i2s-v2.h
diff --git a/sound/soc/s3c24xx/rx1950_uda1380.c b/sound/soc/samsung/rx1950_uda1380.c
similarity index 100%
rename from sound/soc/s3c24xx/rx1950_uda1380.c
rename to sound/soc/samsung/rx1950_uda1380.c
diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/samsung/s3c-i2s-v2.c
similarity index 99%
rename from sound/soc/s3c24xx/s3c-i2s-v2.c
rename to sound/soc/samsung/s3c-i2s-v2.c
index c471431..094f36e 100644
--- a/sound/soc/s3c24xx/s3c-i2s-v2.c
+++ b/sound/soc/samsung/s3c-i2s-v2.c
@@ -1,4 +1,4 @@
-/* sound/soc/s3c24xx/s3c-i2c-v2.c
+/* sound/soc/samsung/s3c-i2c-v2.c
  *
  * ALSA Soc Audio Layer - I2S core for newer Samsung SoCs.
  *
diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.h b/sound/soc/samsung/s3c-i2s-v2.h
similarity index 98%
rename from sound/soc/s3c24xx/s3c-i2s-v2.h
rename to sound/soc/samsung/s3c-i2s-v2.h
index d458301..f8297d9 100644
--- a/sound/soc/s3c24xx/s3c-i2s-v2.h
+++ b/sound/soc/samsung/s3c-i2s-v2.h
@@ -1,4 +1,4 @@
-/* sound/soc/s3c24xx/s3c-i2s-v2.h
+/* sound/soc/samsung/s3c-i2s-v2.h
  *
  * ALSA Soc Audio Layer - S3C_I2SV2 I2S driver
  *
diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/samsung/s3c2412-i2s.c
similarity index 99%
rename from sound/soc/s3c24xx/s3c2412-i2s.c
rename to sound/soc/samsung/s3c2412-i2s.c
index d953ff4..7ea8378 100644
--- a/sound/soc/s3c24xx/s3c2412-i2s.c
+++ b/sound/soc/samsung/s3c2412-i2s.c
@@ -1,4 +1,4 @@
-/* sound/soc/s3c24xx/s3c2412-i2s.c
+/* sound/soc/samsung/s3c2412-i2s.c
  *
  * ALSA Soc Audio Layer - S3C2412 I2S driver
  *
diff --git a/sound/soc/s3c24xx/s3c2412-i2s.h b/sound/soc/samsung/s3c2412-i2s.h
similarity index 95%
rename from sound/soc/s3c24xx/s3c2412-i2s.h
rename to sound/soc/samsung/s3c2412-i2s.h
index 01a0471..02ad579 100644
--- a/sound/soc/s3c24xx/s3c2412-i2s.h
+++ b/sound/soc/samsung/s3c2412-i2s.h
@@ -1,4 +1,4 @@
-/* sound/soc/s3c24xx/s3c2412-i2s.c
+/* sound/soc/samsung/s3c2412-i2s.c
  *
  * ALSA Soc Audio Layer - S3C2412 I2S driver
  *
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/samsung/s3c24xx-i2s.c
similarity index 100%
rename from sound/soc/s3c24xx/s3c24xx-i2s.c
rename to sound/soc/samsung/s3c24xx-i2s.c
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.h b/sound/soc/samsung/s3c24xx-i2s.h
similarity index 100%
rename from sound/soc/s3c24xx/s3c24xx-i2s.h
rename to sound/soc/samsung/s3c24xx-i2s.h
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec.c b/sound/soc/samsung/s3c24xx_simtec.c
similarity index 99%
rename from sound/soc/s3c24xx/s3c24xx_simtec.c
rename to sound/soc/samsung/s3c24xx_simtec.c
index 3f052a5..4a1b002 100644
--- a/sound/soc/s3c24xx/s3c24xx_simtec.c
+++ b/sound/soc/samsung/s3c24xx_simtec.c
@@ -1,4 +1,4 @@
-/* sound/soc/s3c24xx/s3c24xx_simtec.c
+/* sound/soc/samsung/s3c24xx_simtec.c
  *
  * Copyright 2009 Simtec Electronics
  *
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec.h b/sound/soc/samsung/s3c24xx_simtec.h
similarity index 94%
rename from sound/soc/s3c24xx/s3c24xx_simtec.h
rename to sound/soc/samsung/s3c24xx_simtec.h
index e63d5ff..8270748 100644
--- a/sound/soc/s3c24xx/s3c24xx_simtec.h
+++ b/sound/soc/samsung/s3c24xx_simtec.h
@@ -1,4 +1,4 @@
-/* sound/soc/s3c24xx/s3c24xx_simtec.h
+/* sound/soc/samsung/s3c24xx_simtec.h
  *
  * Copyright 2009 Simtec Electronics
  *
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c b/sound/soc/samsung/s3c24xx_simtec_hermes.c
similarity index 98%
rename from sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
rename to sound/soc/samsung/s3c24xx_simtec_hermes.c
index 8b246ab..fec4cac 100644
--- a/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
+++ b/sound/soc/samsung/s3c24xx_simtec_hermes.c
@@ -1,4 +1,4 @@
-/* sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
+/* sound/soc/samsung/s3c24xx_simtec_hermes.c
  *
  * Copyright 2009 Simtec Electronics
  *
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c b/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c
similarity index 98%
rename from sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
rename to sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c
index a922e1e..7915e02 100644
--- a/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
+++ b/sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c
@@ -1,4 +1,4 @@
-/* sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
+/* sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c
  *
  * Copyright 2009 Simtec Electronics
  *
diff --git a/sound/soc/s3c24xx/s3c24xx_uda134x.c b/sound/soc/samsung/s3c24xx_uda134x.c
similarity index 100%
rename from sound/soc/s3c24xx/s3c24xx_uda134x.c
rename to sound/soc/samsung/s3c24xx_uda134x.c
diff --git a/sound/soc/s3c24xx/smartq_wm8987.c b/sound/soc/samsung/smartq_wm8987.c
similarity index 99%
rename from sound/soc/s3c24xx/smartq_wm8987.c
rename to sound/soc/samsung/smartq_wm8987.c
index 5fcc420..3564e00 100644
--- a/sound/soc/s3c24xx/smartq_wm8987.c
+++ b/sound/soc/samsung/smartq_wm8987.c
@@ -1,4 +1,4 @@
-/* sound/soc/s3c24xx/smartq_wm8987.c
+/* sound/soc/samsung/smartq_wm8987.c
  *
  * Copyright 2010 Maurus Cuelenaere <mcuelenaere@gmail.com>
  *
diff --git a/sound/soc/s3c24xx/smdk2443_wm9710.c b/sound/soc/samsung/smdk2443_wm9710.c
similarity index 100%
rename from sound/soc/s3c24xx/smdk2443_wm9710.c
rename to sound/soc/samsung/smdk2443_wm9710.c
diff --git a/sound/soc/s3c24xx/smdk_spdif.c b/sound/soc/samsung/smdk_spdif.c
similarity index 100%
rename from sound/soc/s3c24xx/smdk_spdif.c
rename to sound/soc/samsung/smdk_spdif.c
diff --git a/sound/soc/s3c24xx/smdk_wm8580.c b/sound/soc/samsung/smdk_wm8580.c
similarity index 100%
rename from sound/soc/s3c24xx/smdk_wm8580.c
rename to sound/soc/samsung/smdk_wm8580.c
diff --git a/sound/soc/s3c24xx/smdk_wm9713.c b/sound/soc/samsung/smdk_wm9713.c
similarity index 100%
rename from sound/soc/s3c24xx/smdk_wm9713.c
rename to sound/soc/samsung/smdk_wm9713.c
diff --git a/sound/soc/s3c24xx/spdif.c b/sound/soc/samsung/spdif.c
similarity index 99%
rename from sound/soc/s3c24xx/spdif.c
rename to sound/soc/samsung/spdif.c
index dc85df3..f081640 100644
--- a/sound/soc/s3c24xx/spdif.c
+++ b/sound/soc/samsung/spdif.c
@@ -1,4 +1,4 @@
-/* sound/soc/s3c24xx/spdif.c
+/* sound/soc/samsung/spdif.c
  *
  * ALSA SoC Audio Layer - Samsung S/PDIF Controller driver
  *
diff --git a/sound/soc/s3c24xx/spdif.h b/sound/soc/samsung/spdif.h
similarity index 94%
rename from sound/soc/s3c24xx/spdif.h
rename to sound/soc/samsung/spdif.h
index 3ed5559..4f72cb4 100644
--- a/sound/soc/s3c24xx/spdif.h
+++ b/sound/soc/samsung/spdif.h
@@ -1,4 +1,4 @@
-/* sound/soc/s3c24xx/spdif.h
+/* sound/soc/samsung/spdif.h
  *
  * ALSA SoC Audio Layer - Samsung S/PDIF Controller driver
  *
-- 
1.6.2.5