From: Lu Guanqun <guanqun.lu@intel.com>
To: ALSA <alsa-devel@alsa-project.org>, Lu Guanqun <guanqun.lu@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>, Koul Vinod <vinod.koul@intel.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>,
Wang Xingchao <xingchao.wang@intel.com>
Subject: [PATCH 04/19] ASoC: mrst_machine: add speaker widget to moorestown machine driver
Date: Wed, 04 May 2011 21:45:14 +0800 [thread overview]
Message-ID: <20110504134514.32443.76742.stgit@localhost> (raw)
In-Reply-To: <20110504133756.32443.6282.stgit@localhost>
This internal speaker needs an extra GPIO to control its power.
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
---
sound/soc/mid-x86/mrst_machine.c | 31 +++++++++++++++++++++++++++++++
1 files changed, 31 insertions(+), 0 deletions(-)
diff --git a/sound/soc/mid-x86/mrst_machine.c b/sound/soc/mid-x86/mrst_machine.c
index 11163e7..0bce388 100644
--- a/sound/soc/mid-x86/mrst_machine.c
+++ b/sound/soc/mid-x86/mrst_machine.c
@@ -36,8 +36,24 @@
#include <sound/pcm_params.h>
#include <sound/soc.h>
+/*
+ * GPIO pin to power on/off Internal Speaker
+ */
+static int mrst_gpio_amp;
+
+static int mrst_speaker_event(struct snd_soc_dapm_widget *widget,
+ struct snd_kcontrol *control, int event)
+{
+ if (mrst_gpio_amp)
+ gpio_set_value_cansleep(mrst_gpio_amp,
+ SND_SOC_DAPM_EVENT_ON(event));
+
+ return 0;
+}
+
static const struct snd_soc_dapm_widget mrst_audio_widgets[] = {
SND_SOC_DAPM_HP("Headphone", NULL),
+ SND_SOC_DAPM_SPK("Speaker", mrst_speaker_event),
};
static const struct snd_soc_dapm_route mrst_audio_map[] = {
@@ -46,6 +62,9 @@ static const struct snd_soc_dapm_route mrst_audio_map[] = {
{"Headphone", NULL, "HPOUTL"},
{"Headphone", NULL, "HPOUTR"},
+
+ {"Speaker", NULL, "PREOUTL"},
+ {"Speaker", NULL, "PREOUTR"},
};
static int mrst_audio_init(struct snd_soc_pcm_runtime *runtime)
@@ -72,6 +91,7 @@ static int mrst_audio_init(struct snd_soc_pcm_runtime *runtime)
snd_soc_dapm_nc_pin(dapm, "LINEOUTR");
snd_soc_dapm_enable_pin(dapm, "Headphone");
+ snd_soc_dapm_disable_pin(dapm, "Speaker");
snd_soc_dapm_sync(dapm);
@@ -118,6 +138,13 @@ static int __devinit snd_mrst_audio_probe(struct platform_device *pdev)
{
int ret;
+ if (pdev->dev.platform_data) {
+ mrst_gpio_amp = *(int *)pdev->dev.platform_data;
+ if (gpio_request_one(mrst_gpio_amp,
+ GPIOF_OUT_INIT_LOW, "amp power"))
+ mrst_gpio_amp = 0;
+ }
+
snd_soc_card_mrst.dev = &pdev->dev;
ret = snd_soc_register_card(&snd_soc_card_mrst);
if (ret)
@@ -126,11 +153,15 @@ static int __devinit snd_mrst_audio_probe(struct platform_device *pdev)
return 0;
fail_register_card:
+ if (mrst_gpio_amp)
+ gpio_free(mrst_gpio_amp);
return ret;
}
static int __devexit snd_mrst_audio_remove(struct platform_device *pdev)
{
+ if (mrst_gpio_amp)
+ gpio_free(mrst_gpio_amp);
snd_soc_unregister_card(&snd_soc_card_mrst);
return 0;
}
next prev parent reply other threads:[~2011-05-04 13:43 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-04 13:44 [PATCH 00/19] ASoC for moorestown Lu Guanqun
2011-05-04 13:44 ` [PATCH 01/19] ASoC: upd9976: Add Renesas uPD9976 codec driver Lu Guanqun
2011-05-04 14:34 ` Mark Brown
2011-05-04 15:05 ` Lu Guanqun
2011-05-05 3:14 ` Koul, Vinod
2011-05-05 3:51 ` Lu Guanqun
2011-05-04 15:07 ` Takashi Iwai
2011-05-04 15:18 ` Lu Guanqun
2011-05-04 15:38 ` Takashi Iwai
2011-05-04 16:15 ` Mark Brown
2011-05-05 0:33 ` Lu Guanqun
2011-05-05 0:30 ` Lu Guanqun
2011-05-04 16:13 ` Mark Brown
2011-05-05 16:26 ` Lu Guanqun
2011-05-06 9:37 ` Mark Brown
2011-05-04 14:46 ` Dimitris Papastamos
2011-05-04 15:12 ` Lu Guanqun
2011-05-04 16:11 ` Mark Brown
2011-05-05 3:12 ` Koul, Vinod
2011-05-05 8:07 ` Mark Brown
2011-05-04 13:45 ` [PATCH 02/19] ASoC: sst_platform: add cpu dai driver for moorestown platform Lu Guanqun
2011-05-05 3:23 ` Koul, Vinod
2011-05-05 4:48 ` Lu Guanqun
2011-05-05 9:26 ` Koul, Vinod
2011-05-05 8:05 ` Mark Brown
2011-05-05 9:28 ` Koul, Vinod
2011-05-05 10:26 ` Mark Brown
2011-05-05 10:00 ` Koul, Vinod
2011-05-05 13:46 ` Mark Brown
2011-05-05 14:55 ` Koul, Vinod
2011-05-06 9:37 ` Mark Brown
2011-05-04 13:45 ` [PATCH 03/19] ASoC: mrst_machine: add moorestown machine driver Lu Guanqun
2011-05-04 14:55 ` Dimitris Papastamos
2011-05-04 15:25 ` Lu Guanqun
2011-05-04 13:45 ` Lu Guanqun [this message]
2011-05-04 16:17 ` [PATCH 04/19] ASoC: mrst_machine: add speaker widget to " Mark Brown
2011-05-04 13:45 ` [PATCH 05/19] ASoC: mrst_machine: enable user to select different output Lu Guanqun
2011-05-04 16:22 ` Mark Brown
2011-05-05 0:34 ` Lu Guanqun
2011-05-04 13:45 ` [PATCH 06/19] ASoC: upd9976: add capture ability for dai driver Lu Guanqun
2011-05-04 16:22 ` Mark Brown
2011-05-04 13:45 ` [PATCH 07/19] ASoC: sst_platform: add capture capability for cpu " Lu Guanqun
2011-05-04 13:45 ` [PATCH 08/19] ASoC: upd9976: add DMIC support Lu Guanqun
2011-05-04 15:03 ` Dimitris Papastamos
2011-05-04 15:20 ` Lu Guanqun
2011-05-04 13:45 ` [PATCH 09/19] ASoC: upd9976: add Analog MIC support Lu Guanqun
2011-05-04 13:45 ` [PATCH 10/19] ASoC: upd9976: add microphone bias support Lu Guanqun
2011-05-04 16:25 ` Mark Brown
2011-05-05 0:40 ` Lu Guanqun
2011-05-04 13:45 ` [PATCH 11/19] ASoC: upd9976: add jack detection function Lu Guanqun
2011-05-04 16:32 ` Mark Brown
2011-05-05 0:37 ` Lu Guanqun
2011-05-04 13:45 ` [PATCH 12/19] ASoC: mrst_machine: add capture functionality Lu Guanqun
2011-05-04 13:45 ` [PATCH 13/19] ASoC: mrst_machine: add jack detection support Lu Guanqun
2011-05-04 13:46 ` [PATCH 14/19] ASoC: upd9976: add mute switch for DMIC Lu Guanqun
2011-05-04 13:46 ` [PATCH 15/19] ASoC: upd9976: add mute switch for analog Lu Guanqun
2011-05-04 13:46 ` [PATCH 16/19] ASoC: mrst_machine: make DMIC's output to PCM2 mono Lu Guanqun
2011-05-04 13:46 ` [PATCH 17/19] ASoC: mrst_machine: make MIC2 pseudo-differential Lu Guanqun
2011-05-04 13:46 ` [PATCH 18/19] ASoC: upd9976: add capture volume for analog inputs Lu Guanqun
2011-05-04 13:46 ` [PATCH 19/19] ASoC: upd9976: add capture volume for DMIC Lu Guanqun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110504134514.32443.76742.stgit@localhost \
--to=guanqun.lu@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lrg@ti.com \
--cc=tiwai@suse.de \
--cc=vinod.koul@intel.com \
--cc=xingchao.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).