From: Lu Guanqun <guanqun.lu@intel.com>
To: ALSA <alsa-devel@alsa-project.org>, Lu Guanqun <guanqun.lu@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>, Koul Vinod <vinod.koul@intel.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>,
Wang Xingchao <xingchao.wang@intel.com>
Subject: [PATCH v2 00/10] ASoC Support For Moorestown
Date: Fri, 06 May 2011 13:45:57 +0800 [thread overview]
Message-ID: <20110506053852.26312.79083.stgit@localhost> (raw)
This series of patches provides the ASoC implementation of moorestown audio.
This series adds a new codec called upd9976 and a new machine driver called
mrst_machine. The platform driver is mostly re-used.
With this patchset, it can do:
- playback via headphone
- playback via internal speaker
- capture via DMIC
- capture via headset microphone
- jack detection
v2:
- change pr_err to dev_err
- change DAPM widgets' name (adding correct suffix)
- change to data based init of controls, widgets and route in machine driver
- add Master Volume
- change original "HP & Spker Mixer Volume" to "PCM Volume"
- squash some patches into one, resulting in less number of patches
- move jack handling from machine driver to codec driver
- in codec probe, set the bias level to standby instead of off
Thanks for all the reviewers:
- Mark Brown
- Dimitris Papastamos
- Takashi Iwai
- Koul Vinod
Any more comments are welcome. :)
---
Lu Guanqun (8):
ASoC: upd9976: Add Renesas uPD9976 codec driver
ASoC: mrst_machine: add moorestown machine driver
ASoC: upd9976: add DMIC support
ASoC: upd9976: add Analog MIC support
ASoC: upd9976: add jack detection function
ASoC: mrst_machine: add capture functionality
ASoC: mrst_machine: add jack detection support
ASoC: mrst_machine: add initial config to machine driver
Wang Xingchao (2):
ASoC: sst_platform: modify current cpu dai driver to suit the needs for moorestown platform
ASoC: upd9976: add capture ability for dai driver
sound/soc/codecs/Kconfig | 4
sound/soc/codecs/Makefile | 2
sound/soc/codecs/upd9976.c | 697 ++++++++++++++++++++++++++++++++++++++
sound/soc/codecs/upd9976.h | 87 +++++
sound/soc/mid-x86/Kconfig | 12 +
sound/soc/mid-x86/Makefile | 2
sound/soc/mid-x86/mrst_machine.c | 228 ++++++++++++
sound/soc/mid-x86/sst_platform.c | 13 -
8 files changed, 1041 insertions(+), 4 deletions(-)
create mode 100644 sound/soc/codecs/upd9976.c
create mode 100644 sound/soc/codecs/upd9976.h
create mode 100644 sound/soc/mid-x86/mrst_machine.c
--
guanqun
next reply other threads:[~2011-05-06 5:44 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-06 5:45 Lu Guanqun [this message]
2011-05-06 5:46 ` [PATCH v2 01/10] ASoC: upd9976: Add Renesas uPD9976 codec driver Lu Guanqun
2011-05-06 10:17 ` Mark Brown
2011-05-07 14:21 ` Lu Guanqun
2011-05-07 14:27 ` Mark Brown
2011-05-07 14:43 ` Lu Guanqun
2011-05-06 5:46 ` [PATCH v2 02/10] ASoC: sst_platform: modify current cpu dai driver to suit the needs for moorestown platform Lu Guanqun
2011-05-06 5:46 ` [PATCH v2 03/10] ASoC: mrst_machine: add moorestown machine driver Lu Guanqun
2011-05-06 5:46 ` [PATCH v2 04/10] ASoC: upd9976: add capture ability for dai driver Lu Guanqun
2011-05-06 5:46 ` [PATCH v2 05/10] ASoC: upd9976: add DMIC support Lu Guanqun
2011-05-06 11:07 ` Mark Brown
2011-05-06 5:46 ` [PATCH v2 06/10] ASoC: upd9976: add Analog MIC support Lu Guanqun
2011-05-06 5:46 ` [PATCH v2 07/10] ASoC: upd9976: add jack detection function Lu Guanqun
2011-05-06 12:53 ` Mark Brown
2011-05-06 5:46 ` [PATCH v2 08/10] ASoC: mrst_machine: add capture functionality Lu Guanqun
2011-05-06 5:46 ` [PATCH v2 09/10] ASoC: mrst_machine: add jack detection support Lu Guanqun
2011-05-06 5:46 ` [PATCH v2 10/10] ASoC: mrst_machine: add initial config to machine driver Lu Guanqun
2011-05-06 12:54 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110506053852.26312.79083.stgit@localhost \
--to=guanqun.lu@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lrg@ti.com \
--cc=tiwai@suse.de \
--cc=vinod.koul@intel.com \
--cc=xingchao.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).