Re: snd soc spi read/write

[Dimitris Papastamos <dp@opensource.wolfsonmicro.com>]

On Thu, Aug 11, 2011 at 02:32:53PM +0900, Mark Brown wrote:
> On Thu, Aug 11, 2011 at 05:09:14AM +0200, Lars-Peter Clausen wrote:
> > On 08/11/2011 04:46 AM, Mark Brown wrote:
> 
> > > None of the current ASoC code will coalesce register writes at all, and
> > > in the case where you're doing writes to registers that aren't actually
> > > adjacent it's going to be marginal if it's better to transmit the
> > > intervening register or transmit another register address.  That only
> > > really makes a difference during cache sync anyway.
> 
> > I was think more in terms of in memory consumption and lookup time of the cache
> > compared to a flat cache. If you have two blocks which have a gap of one
> > register between them and that register gets inserted into the cache, ideally
> > those two blocks would be merged, which doesn't seem to be the case currently.
> > So instead of one rbnode with a block covering the whole register space you'll
> > end up with a lot of smaller rbnodes.

Yes, that's true.  I've got that in my TODO somewhere.  It was not
important enough during initial implementation.

> Dimitris had done an initial version of the move of the cache over,
> though I didn't review it properly yet and he's on holiday now.  I might
> repost it, there were a few issues but it's at least 90% of the way
> there IIRC from the time I had to look at it.

I'll be looking into this soon, there are a few issues to be resolved
regarding the LZO code at the moment.

Thanks,
Dimitris