From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org, Liam Girdwood <lrg@ti.com>
Subject: ASoC updates for 3.2
Date: Thu, 13 Oct 2011 11:49:58 +0100 [thread overview]
Message-ID: <20111013104958.GA5193@opensource.wolfsonmicro.com> (raw)
The following changes since commit 03b5362d2fef02cabbbb440d861d27e40ed3a929:
ASoC: Convert Jive to table based init (2011-10-10 11:10:44 +0100)
are available in the git repository at:
git://opensource.wolfsonmicro.com/linux-2.6-asoc.git for-3.2
Ashish Chavan (1):
ASoC: da7210: Add support for other DAI word lengths, format and mode
Axel Lin (6):
ASoC: Writing register default value for the reset register
ASoC: ak4642: convert to soc-cache
ASoC: Delete ads117x.h
ASoC: Remove impossible case from wm8994_hw_params
ASoC: da7210: convert to soc-cache
ASoC: Make SND_SOC_SAARB and SND_SOC_TAVOREVB3 select MFD_88PM860X
Mark Brown (4):
ASoC: Convert Goni to data based DAPM init
ASoC: Add missing default for WM5100 Clocking 1
ASoC: Implement WM5100 accessory detection support
ASoC: Instantiate card widgets immediately
Peter Ujfalusi (18):
ASoC: OMAP machines: Remove soc_dapm_sync() call from init
ASoC: zoom2: Let core to deal with the DAPM widgets
ASoC: zoom2: No need to call dapm_pin_enable at init time
ASoC: sdp4430: Let core to deal with the DAPM widgets
ASoC: sdp4430: No need to call dapm_pin_enable at init time
ASoC: am3517evm: Let core to deal with the DAPM widgets
ASoC: n810: Let the core to register DAPM widgets/routes and controls
ASoC: osk5912: Let core to deal with the DAPM widgets
ASoC: sdp3430: Let core to deal with the DAPM widgets
ASoC: twl6040: Convert to table based init
ASoC: twl4030: Convert to table based init
ASoC: tlv320dac33: Convert to table based init
Input: twl6040: Simplify vibra regsiter definitions
MFD: twl6040: Cache the vibra control registers
MFD: twl6040: function to query the vibra status for clients
Input: twl6040-vibra: Check the selected path for vibra
ASoC: twl6040: Support for vibra output paths
ASoC: twl6040: Workaround for headset DC offset caused pop noise
Wolfram Sang (1):
ASoC: Fix typo in Kconfig symbol for tlv320aic32x4
drivers/input/misc/twl6040-vibra.c | 19 +++--
drivers/mfd/twl6040-core.c | 31 ++++++-
include/linux/mfd/twl6040.h | 25 +++---
sound/soc/codecs/Kconfig | 4 +-
sound/soc/codecs/Makefile | 2 +-
sound/soc/codecs/ads117x.h | 13 ---
sound/soc/codecs/ak4642.c | 82 +++----------------
sound/soc/codecs/da7210.c | 146 +++++++++++++++-----------------
sound/soc/codecs/tlv320dac33.c | 23 ++----
sound/soc/codecs/twl4030.c | 21 ++---
sound/soc/codecs/twl6040.c | 135 ++++++++++++++++++++++++------
sound/soc/codecs/wm5100-tables.c | 1 +
sound/soc/codecs/wm5100.c | 162 ++++++++++++++++++++++++++++++++++++
sound/soc/codecs/wm5100.h | 2 +
sound/soc/codecs/wm8983.c | 2 +-
sound/soc/codecs/wm8994.c | 10 --
sound/soc/imx/Kconfig | 2 +-
sound/soc/omap/am3517evm.c | 28 +-----
sound/soc/omap/ams-delta.c | 1 -
sound/soc/omap/n810.c | 23 ++----
sound/soc/omap/omap3pandora.c | 8 +--
sound/soc/omap/osk5912.c | 27 +-----
sound/soc/omap/rx51.c | 2 -
sound/soc/omap/sdp3430.c | 18 +---
sound/soc/omap/sdp4430.c | 27 +-----
sound/soc/omap/zoom2.c | 26 ++-----
sound/soc/pxa/Kconfig | 2 +
sound/soc/samsung/goni_wm8994.c | 13 +--
sound/soc/soc-core.c | 2 +
29 files changed, 467 insertions(+), 390 deletions(-)
delete mode 100644 sound/soc/codecs/ads117x.h
next reply other threads:[~2011-10-13 10:50 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-13 10:49 Mark Brown [this message]
2011-10-13 10:53 ` ASoC updates for 3.2 Takashi Iwai
-- strict thread matches above, loose matches on Subject: below --
2011-12-22 11:04 Mark Brown
2011-12-22 11:15 ` Takashi Iwai
[not found] ` <CAAQ0ZWSoQJJZv9ReBvHC1FB2EeS_u2V=jDJOguoqNx2cR+1i_g@mail.gmail.com>
2011-12-22 12:02 ` Mark Brown
2011-12-22 12:07 ` Takashi Iwai
[not found] ` <CAAQ0ZWTnMuDCHDQQWg9mvQHTwzm6hJu5TOFvbwc18R5xEhSdiw@mail.gmail.com>
2011-12-22 12:46 ` Mark Brown
2011-12-13 1:40 Mark Brown
2011-12-13 7:06 ` Takashi Iwai
2011-12-13 7:09 ` Mark Brown
2011-12-06 10:16 Mark Brown
2011-12-06 12:26 ` Takashi Iwai
2011-11-30 10:28 Mark Brown
2011-11-30 11:20 ` Takashi Iwai
2011-11-29 11:36 Mark Brown
2011-11-29 12:07 ` Takashi Iwai
2011-11-22 12:46 Mark Brown
2011-11-22 17:47 ` Takashi Iwai
2011-11-08 10:46 Mark Brown
2011-11-08 16:00 ` Takashi Iwai
2011-11-02 11:50 Mark Brown
2011-11-02 13:16 ` Takashi Iwai
2011-11-02 13:17 ` Mark Brown
2011-11-02 13:23 ` Takashi Iwai
2011-10-27 7:22 Mark Brown
2011-10-27 8:49 ` Takashi Iwai
2011-10-22 9:49 Mark Brown
2011-10-22 11:45 ` Takashi Iwai
2011-10-19 17:26 Mark Brown
2011-10-20 12:20 ` Takashi Iwai
2011-10-20 12:24 ` Mark Brown
2011-10-20 12:47 ` Takashi Iwai
2011-10-20 16:56 ` Girdwood, Liam
2011-10-10 11:41 Mark Brown
2011-10-10 12:42 ` Takashi Iwai
2011-10-10 12:46 ` Mark Brown
2011-10-04 14:16 Mark Brown
2011-10-04 14:45 ` Takashi Iwai
2011-10-04 14:48 ` Mark Brown
2011-10-04 14:49 ` Takashi Iwai
2011-09-27 12:47 Mark Brown
2011-09-27 13:01 ` Takashi Iwai
2011-09-23 10:47 Mark Brown
2011-09-23 13:23 ` Takashi Iwai
2011-09-20 14:43 Mark Brown
2011-09-20 14:47 ` Takashi Iwai
2011-09-08 18:23 Mark Brown
2011-08-25 11:08 Mark Brown
2011-08-25 12:08 ` Takashi Iwai
2011-08-21 12:10 Mark Brown
2011-08-21 13:47 ` Takashi Iwai
2011-08-12 16:51 Mark Brown
2011-08-12 17:50 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111013104958.GA5193@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=lrg@ti.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).