From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org, Liam Girdwood <lrg@ti.com>
Subject: ASoC updates for 3.3
Date: Tue, 8 Nov 2011 11:24:04 +0000 [thread overview]
Message-ID: <20111108112404.GH25591@opensource.wolfsonmicro.com> (raw)
The following changes since commit 1ea6b8f48918282bdca0b32a34095504ee65bab5:
Linux 3.2-rc1 (2011-11-07 16:16:02 -0800)
are available in the git repository at:
git://opensource.wolfsonmicro.com/linux-2.6-asoc.git for-3.3
Axel Lin (6):
ASoC: wm8400: Fix setting Fout clock divider for FLL Control 4
ASoC: wm8996: Avoid a redundant i2c_get_clientdata call in wm8996_i2c_remove
ASoC: wm8940: Fix setting PLL Output clock division ratio
ASoC: wm8940: Fix a typo for the mask of setting WM8940_BCLKDIV
ASoC: tlv320aic3x: Use snd_soc_update_bits for read-modify-write
ASoC: Avoid a redundant read in cs42l51_pdn_event
Kuninori Morimoto (3):
ASoC: fsi: fixup compile warning
ASoC: ak4642: ak4642 was tested
ASoC: fsi: add valid data position control support
Mark Brown (29):
ASoC: Convert wm8995 MICBIASes to supply widgets
ASoC: Convert wm8991 MICBIAS to a supply widget
ASoC: Convert wm8990 MICBIAS to a supply widget
ASoC: Convert wm8988 MICBIAS to a supply widget
ASoC: Convert wm8985 MICBIAS to a supply widget
ASoC: Convert wm8983 MICBIAS to a supply widget
ASoC: Convert wm8974 MICBIAS to a supply widget
ASoC: Convert wm8961 MICBIAS to a supply widget
ASoC: Convert wm8960 MICBIAS to a supply widget
ASoC: Convert wm8904 MICBIAS to a supply widget
ASoC: Convert wm8900 MICBIAS to a supply widget
ASoC: Convert wm8400 MICBIAS to a supply widget
ASoC: Start WM8962 FLL if SYSCLK is enabled
ASoC: Enable SYSCLK last when enabling WM8962 mic detection
ASoC: WM8962 accessory detection requires MICBIAS
ASoC: Disable MICBIAS and SYSCLK when stopping WM8962 accessory detection
ASoC: Sort LM4857 with the CODECs in the Makefile
ASoC: Fix sort of jz4740 in Makefile
ASoC: Update git repository URL
ASoC: Remove needless unlikely()
ASoC: Only enable thermal shutdown when required on WM9081
ASoC: Manage thermal shutdown for WM8962
ASoC: Disable thermal shutdown when not using speakers in wm_hubs
ASoC: Don't use wm8994->control_data in wm8994_readable_register()
ASoC: Don't use wm8994->control_data when requesting IRQs
ASoC: Ensure we get an impedence reported for WM8958 jack detect
Merge branch 'for-3.2' into for-3.3
Merge branch 'for-3.2' of git://git.kernel.org/.../broonie/sound into for-3.2
Merge branch 'for-3.2' into for-3.3
ramesh.babu@linux.intel.com (1):
ASoC: Allow machines to ignore pmdown_time per-link
MAINTAINERS | 2 +-
include/linux/mfd/wm8994/registers.h | 15 ++++++++++++
include/sound/soc.h | 3 ++
sound/soc/codecs/Makefile | 6 ++--
sound/soc/codecs/ak4642.c | 2 +-
sound/soc/codecs/cs42l51.c | 13 ++++------
sound/soc/codecs/tlv320aic3x.c | 41 +++++++++++---------------------
sound/soc/codecs/wm8400.c | 6 ++--
sound/soc/codecs/wm8900.c | 2 +-
sound/soc/codecs/wm8904.c | 2 +-
sound/soc/codecs/wm8940.c | 4 +-
sound/soc/codecs/wm8960.c | 2 +-
sound/soc/codecs/wm8961.c | 2 +-
sound/soc/codecs/wm8962.c | 20 +++++++++++++++
sound/soc/codecs/wm8974.c | 2 +-
sound/soc/codecs/wm8983.c | 3 +-
sound/soc/codecs/wm8985.c | 3 +-
sound/soc/codecs/wm8988.c | 2 +-
sound/soc/codecs/wm8990.c | 4 +-
sound/soc/codecs/wm8991.c | 4 +-
sound/soc/codecs/wm8994.c | 43 +++++++++++++++++++++++-----------
sound/soc/codecs/wm8995.c | 6 +++-
sound/soc/codecs/wm8996.c | 2 +-
sound/soc/codecs/wm9081.c | 2 +
sound/soc/codecs/wm_hubs.c | 3 ++
sound/soc/sh/fsi.c | 21 ++++++++++++++--
sound/soc/soc-pcm.c | 3 +-
27 files changed, 140 insertions(+), 78 deletions(-)
next reply other threads:[~2011-11-08 11:24 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-08 11:24 Mark Brown [this message]
2011-11-08 16:01 ` ASoC updates for 3.3 Takashi Iwai
-- strict thread matches above, loose matches on Subject: below --
2011-11-22 12:59 Mark Brown
2011-11-22 17:47 ` Takashi Iwai
2011-11-29 11:38 Mark Brown
2011-11-29 12:11 ` Takashi Iwai
2011-12-06 10:37 Mark Brown
[not found] <20111213071251.GF7148@opensource.wolfsonmicro.com>
2011-12-13 9:18 ` Takashi Iwai
2011-12-13 10:01 ` Mark Brown
2011-12-23 12:18 Mark Brown
2011-12-23 13:38 ` Takashi Iwai
2011-12-28 11:43 Mark Brown
2011-12-31 16:53 ` Takashi Iwai
2012-01-06 6:43 Mark Brown
2012-01-08 13:41 ` Takashi Iwai
2012-01-12 8:38 Mark Brown
2012-01-17 16:54 Mark Brown
2012-01-17 19:47 ` Takashi Iwai
2012-01-30 13:34 Mark Brown
2012-01-30 14:27 ` Takashi Iwai
2012-01-30 14:51 ` Mark Brown
2012-01-30 15:19 ` Takashi Iwai
2012-02-04 12:55 Mark Brown
2012-02-06 9:32 ` Takashi Iwai
2012-02-06 11:08 ` Mark Brown
2012-02-06 11:13 ` Takashi Iwai
2012-02-06 11:15 ` Mark Brown
2012-02-08 20:15 Mark Brown
2012-02-08 21:32 ` Takashi Iwai
2012-02-21 19:48 Mark Brown
2012-02-21 20:23 ` Takashi Iwai
2012-03-01 12:41 Mark Brown
2012-03-01 13:20 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111108112404.GH25591@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=lrg@ti.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).