alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Yoichi Yuasa <yuasa@linux-mips.org>
To: patch@alsa-project.org
Cc: alsa-devel@alsa-project.org, yuasa@linux-mips.org
Subject: [PATCH 01/19] ALSA: add Yamaha YMU831 codec support
Date: Wed, 16 Jan 2013 17:25:30 +0900	[thread overview]
Message-ID: <20130116172530.857b627ef3303fb6fe43f603@linux-mips.org> (raw)


Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
---
 sound/soc/codecs/Kconfig         |    6 ++++++
 sound/soc/codecs/Makefile        |    1 +
 sound/soc/codecs/ymu831/Makefile |    3 +++
 3 files changed, 10 insertions(+)
 create mode 100644 sound/soc/codecs/ymu831/Makefile

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 3a84782..bb405b87 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -122,6 +122,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_WM9705 if SND_SOC_AC97_BUS
 	select SND_SOC_WM9712 if SND_SOC_AC97_BUS
 	select SND_SOC_WM9713 if SND_SOC_AC97_BUS
+	select SND_SOC_YMU831 if SPI_MASTER
         help
           Normally ASoC codec drivers are only built if a machine driver which
           uses them is also built since they are only usable with a machine
@@ -494,6 +495,11 @@ config SND_SOC_WM9712
 config SND_SOC_WM9713
 	tristate
 
+config SND_SOC_YMU831
+	tristate
+	select SND_HWDEP
+
+
 # Amp
 config SND_SOC_LM4857
 	tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index f6e8e36..1d31783 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -236,6 +236,7 @@ obj-$(CONFIG_SND_SOC_WM9712)	+= snd-soc-wm9712.o
 obj-$(CONFIG_SND_SOC_WM9713)	+= snd-soc-wm9713.o
 obj-$(CONFIG_SND_SOC_WM_ADSP)	+= snd-soc-wm-adsp.o
 obj-$(CONFIG_SND_SOC_WM_HUBS)	+= snd-soc-wm-hubs.o
+obj-$(CONFIG_SND_SOC_YMU831)	+= ymu831/
 
 # Amp
 obj-$(CONFIG_SND_SOC_MAX9877)	+= snd-soc-max9877.o
diff --git a/sound/soc/codecs/ymu831/Makefile b/sound/soc/codecs/ymu831/Makefile
new file mode 100644
index 0000000..5b3f66d
--- /dev/null
+++ b/sound/soc/codecs/ymu831/Makefile
@@ -0,0 +1,3 @@
+snd-soc-ymu831-objs := \
+
+obj-$(CONFIG_SND_SOC_YMU831) += snd-soc-ymu831.o
-- 
1.7.9.5

             reply	other threads:[~2013-01-16  8:25 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-16  8:25 Yoichi Yuasa [this message]
2013-01-16  8:27 ` [PATCH 02/19] ALSA: ymu831: add device register definitions Yoichi Yuasa
2013-01-16 11:45   ` Takashi Iwai
2013-01-17  5:59     ` Yoichi Yuasa
2013-01-17  6:45       ` Takashi Iwai
2013-01-17 10:33         ` Yoichi Yuasa
2013-01-16 13:18   ` Mark Brown
2013-01-17  6:00     ` Yoichi Yuasa
2013-01-17  6:02       ` Mark Brown
2013-01-17  6:24         ` Yoichi Yuasa
2013-01-16  8:28 ` [PATCH 03/19] ALSA: ymu831: add B-DSP driver Yoichi Yuasa
2013-01-16 11:49   ` Takashi Iwai
2013-01-17  5:58     ` Yoichi Yuasa
2013-01-16 13:22   ` Mark Brown
2013-01-17  5:59     ` Yoichi Yuasa
2013-01-17  6:07       ` Mark Brown
2013-01-16  8:29 ` [PATCH 04/19] ALSA: ymu831: add C-DSP operating system data Yoichi Yuasa
2013-01-16 13:23   ` Mark Brown
2013-01-16  8:31 ` [PATCH 05/19] ALSA: ymu831: add C-DSP driver Yoichi Yuasa
2013-01-16 13:32   ` Mark Brown
2013-01-16  8:32 ` [PATCH 06/19] ALSA: ymu831: add device interface driver Yoichi Yuasa
2013-01-16 13:36   ` Mark Brown
2013-01-16  8:33 ` [PATCH 07/19] ALSA: ymu831: add base driver Yoichi Yuasa
2013-01-16 13:43   ` Mark Brown
2013-01-16  8:34 ` [PATCH 08/19] ALSA: ymu831: add E-DSP driver Yoichi Yuasa
2013-01-16  8:35 ` [PATCH 09/19] ALSA: ymu831: add F-DSP driver Yoichi Yuasa
2013-01-16  8:36 ` [PATCH 10/19] ALSA: ymu831: add device control packet packing driver Yoichi Yuasa
2013-01-16  8:37 ` [PATCH 11/19] ALSA: ymu831: add data parser Yoichi Yuasa
2013-01-16  8:38 ` [PATCH 12/19] ALSA: ymu831: add resource control driver Yoichi Yuasa
2013-01-16  8:39 ` [PATCH 13/19] ALSA: yum831: add configurations header Yoichi Yuasa
2013-01-16  8:40 ` [PATCH 14/19] ALSA: ymu831: add codec control definitions Yoichi Yuasa
2013-01-16  8:41 ` [PATCH 15/19] ALSA: ymu831: add path configurations header Yoichi Yuasa
2013-01-16  8:42 ` [PATCH 16/19] ALSA: ymu831: add volume map header Yoichi Yuasa
2013-01-16  8:43 ` [PATCH 17/19] ALSA: ymu831: add codec driver Yoichi Yuasa
2013-01-16 14:16   ` Mark Brown
2013-01-16  8:44 ` [PATCH 18/19] ALSA: ymu831: add hwdep ioctl Yoichi Yuasa
2013-01-16 11:53   ` Takashi Iwai
2013-01-16 13:53   ` Mark Brown
2013-01-16  8:46 ` [PATCH 19/19] ALSA: SoC Audio support for OMAP4 boards with Yamaha YMU831 codec Yoichi Yuasa
2013-01-16 13:48   ` Mark Brown
2013-01-16 11:38 ` [PATCH 01/19] ALSA: add Yamaha YMU831 codec support Takashi Iwai
2013-01-16 11:42   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130116172530.857b627ef3303fb6fe43f603@linux-mips.org \
    --to=yuasa@linux-mips.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=patch@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).