From: Yoichi Yuasa <yuasa@linux-mips.org>
To: patch@alsa-project.org
Cc: alsa-devel@alsa-project.org, yuasa@linux-mips.org
Subject: [PATCH 19/19] ALSA: SoC Audio support for OMAP4 boards with Yamaha YMU831 codec
Date: Wed, 16 Jan 2013 17:46:01 +0900 [thread overview]
Message-ID: <20130116174601.1427658dd0091efa61fc7f74@linux-mips.org> (raw)
In-Reply-To: <20130116172530.857b627ef3303fb6fe43f603@linux-mips.org>
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
---
sound/soc/omap/Kconfig | 11 +++
sound/soc/omap/Makefile | 2 +
sound/soc/omap/omap-ymu831.c | 169 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 182 insertions(+)
create mode 100644 sound/soc/omap/omap-ymu831.c
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
index 7048137..ff8975b 100644
--- a/sound/soc/omap/Kconfig
+++ b/sound/soc/omap/Kconfig
@@ -131,3 +131,14 @@ config SND_OMAP_SOC_ZOOM2
select SND_SOC_TWL4030
help
Say Y if you want to add support for Soc audio on Zoom2 board.
+
+config SND_OMAP_SOC_OMAP_YMU831
+ tristate "SoC Audio support for OMAP4 boards with Yamaha YMU831 codec"
+ depends on SND_OMAP_SOC && ARCH_OMAP4 && SPI_MASTER
+ select SND_OMAP_SOC_MCBSP
+ select SND_SOC_YMU831
+ help
+ Say Y if you want to add support for SoC audio on OMAP4 boards
+ using Yamaha YMU831 codec. This driver currently supports:
+ - SDP4430
+ - PandaBoard (4430)
diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile
index 19637e5..4bbff7b 100644
--- a/sound/soc/omap/Makefile
+++ b/sound/soc/omap/Makefile
@@ -23,6 +23,7 @@ snd-soc-omap-twl4030-objs := omap-twl4030.o
snd-soc-omap3pandora-objs := omap3pandora.o
snd-soc-zoom2-objs := zoom2.o
snd-soc-omap-hdmi-card-objs := omap-hdmi-card.o
+snd-soc-omap-ymu831-objs := omap-ymu831.o
obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o
obj-$(CONFIG_SND_OMAP_SOC_RX51) += snd-soc-rx51.o
@@ -36,3 +37,4 @@ obj-$(CONFIG_SND_OMAP_SOC_OMAP_TWL4030) += snd-soc-omap-twl4030.o
obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o
obj-$(CONFIG_SND_OMAP_SOC_ZOOM2) += snd-soc-zoom2.o
obj-$(CONFIG_SND_OMAP_SOC_OMAP_HDMI) += snd-soc-omap-hdmi-card.o
+obj-$(CONFIG_SND_OMAP_SOC_OMAP_YMU831) += snd-soc-omap-ymu831.o
diff --git a/sound/soc/omap/omap-ymu831.c b/sound/soc/omap/omap-ymu831.c
new file mode 100644
index 0000000..2f16ca2
--- /dev/null
+++ b/sound/soc/omap/omap-ymu831.c
@@ -0,0 +1,169 @@
+/*
+ * ALSA SoC for OMAP4 boards with Yamaha YMU831 codec
+ *
+ * Copyright (c) 2011 Yamaha Corporation
+ *
+ * This software is provided 'as-is', without any express or implied
+ * warranty. In no event will the authors be held liable for any damages
+ * arising from the use of this software.
+ *
+ * Permission is granted to anyone to use this software for any purpose,
+ * including commercial applications, and to alter it and redistribute it
+ * freely, subject to the following restrictions:
+ *
+ * 1. The origin of this software must not be misrepresented; you must not
+ * claim that you wrote the original software. If you use this software
+ * in a product, an acknowledgment in the product documentation would be
+ * appreciated but is not required.
+ * 2. Altered source versions must be plainly marked as such, and must not be
+ * misrepresented as being the original software.
+ * 3. This notice may not be removed or altered from any source distribution.
+ */
+#include <linux/io.h>
+#include <linux/module.h>
+#include <sound/soc.h>
+#include <asm/mach-types.h>
+
+#include "omap-mcbsp.h"
+#include "../codecs/ymu831/ymu831.h"
+
+#define INTERNAL_FREQ (196608000 / 2)
+
+static int omap_ymu831_dai_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ void *base;
+ int internal_freq = INTERNAL_FREQ;
+ int dev, ret;
+
+ base = ioremap(0x4a004108, 16);
+ if (base) {
+ if (params_rate(params) < 16000) {
+ internal_freq /= 4;
+ iowrite32(ioread32(base) | 0x02, base);
+ } else
+ iowrite32(ioread32(base) & ~0x02, base);
+ iounmap(base);
+ }
+
+ /* Set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai,
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0) {
+ pr_err("can't set cpu DAI configuration %d\n", ret);
+ return ret;
+ }
+
+ ret = snd_soc_dai_set_fmt(codec_dai,
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0) {
+ pr_err("can't set codec DAI configuration %d\n", ret);
+ return ret;
+ }
+
+ ret = snd_soc_dai_set_sysclk(cpu_dai,
+ OMAP_MCBSP_SYSCLK_CLK,
+ internal_freq, SND_SOC_CLOCK_OUT);
+ if (ret < 0) {
+ pr_err("can't set cpu system clock %d\n", ret);
+ return ret;
+ }
+
+ dev = internal_freq / (params_rate(params) * 32);
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, OMAP_MCBSP_CLKGDV, dev);
+ if (ret < 0) {
+ pr_err("can't set cpu clkdiv %d\n", ret);
+ return ret;
+ }
+
+ ret = snd_soc_dai_set_clkdiv(codec_dai,
+ MC_ASOC_BCLK_MULT, MC_ASOC_LRCK_X32);
+ if (ret < 0) {
+ pr_err("can't set codec clkdiv %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct snd_soc_ops omap_ymu831_dai_ops = {
+ .hw_params = omap_ymu831_dai_hw_params,
+};
+
+static int omap_ymu831_init(struct snd_soc_pcm_runtime *rtd)
+{
+ rtd->pmdown_time = 500;
+
+ return 0;
+}
+
+/* Machine DAI Configuration */
+static struct snd_soc_dai_link omap_ymu831_dai[] = {
+ {
+ .name = "Application",
+ .stream_name = "HiFi Audio",
+ .codec_dai_name = MC_ASOC_NAME "-da0",
+ .cpu_dai_name = "omap-mcbsp.2",
+ .codec_name = "spi1.0",
+ .platform_name = "omap-pcm-audio",
+ .init = omap_ymu831_init,
+ .ops = &omap_ymu831_dai_ops,
+ },
+};
+
+/* Audio machine driver */
+static struct snd_soc_card omap_ymu831_card = {
+ .name = "omap-" MC_ASOC_NAME,
+ .owner = THIS_MODULE,
+ .dai_link = omap_ymu831_dai,
+ .long_name = "Yamaha YMU831 ASOC for OMAP",
+ .num_links = ARRAY_SIZE(omap_ymu831_dai),
+};
+
+static __devinit int omap_ymu831_probe(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = &omap_ymu831_card;
+ int ret;
+
+ if (!machine_is_omap_4430sdp() && !machine_is_omap4_panda()) {
+ pr_debug("Not SDP4430 or PandaBoard!\n");
+ return -ENODEV;
+ }
+
+ card->dev = &pdev->dev;
+ ret = snd_soc_register_card(card);
+ if (ret)
+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
+ ret);
+
+ return ret;
+}
+
+static int __devexit omap_ymu831_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+ return snd_soc_unregister_card(card);
+}
+
+static struct platform_driver omap_ymu831_driver = {
+ .driver = {
+ .name = "omap-" MC_ASOC_NAME,
+ .owner = THIS_MODULE,
+ .pm = &snd_soc_pm_ops,
+ },
+ .probe = omap_ymu831_probe,
+ .remove = __devexit_p(omap_ymu831_remove),
+};
+
+module_platform_driver(omap_ymu831_driver);
+
+MODULE_AUTHOR("Yamaha Corporation");
+MODULE_DESCRIPTION("ALSA SoC for OMAP4 boards with Yamaha YMU831 codec");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:omap-ymu831");
--
1.7.9.5
next prev parent reply other threads:[~2013-01-16 8:46 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-16 8:25 [PATCH 01/19] ALSA: add Yamaha YMU831 codec support Yoichi Yuasa
2013-01-16 8:27 ` [PATCH 02/19] ALSA: ymu831: add device register definitions Yoichi Yuasa
2013-01-16 11:45 ` Takashi Iwai
2013-01-17 5:59 ` Yoichi Yuasa
2013-01-17 6:45 ` Takashi Iwai
2013-01-17 10:33 ` Yoichi Yuasa
2013-01-16 13:18 ` Mark Brown
2013-01-17 6:00 ` Yoichi Yuasa
2013-01-17 6:02 ` Mark Brown
2013-01-17 6:24 ` Yoichi Yuasa
2013-01-16 8:28 ` [PATCH 03/19] ALSA: ymu831: add B-DSP driver Yoichi Yuasa
2013-01-16 11:49 ` Takashi Iwai
2013-01-17 5:58 ` Yoichi Yuasa
2013-01-16 13:22 ` Mark Brown
2013-01-17 5:59 ` Yoichi Yuasa
2013-01-17 6:07 ` Mark Brown
2013-01-16 8:29 ` [PATCH 04/19] ALSA: ymu831: add C-DSP operating system data Yoichi Yuasa
2013-01-16 13:23 ` Mark Brown
2013-01-16 8:31 ` [PATCH 05/19] ALSA: ymu831: add C-DSP driver Yoichi Yuasa
2013-01-16 13:32 ` Mark Brown
2013-01-16 8:32 ` [PATCH 06/19] ALSA: ymu831: add device interface driver Yoichi Yuasa
2013-01-16 13:36 ` Mark Brown
2013-01-16 8:33 ` [PATCH 07/19] ALSA: ymu831: add base driver Yoichi Yuasa
2013-01-16 13:43 ` Mark Brown
2013-01-16 8:34 ` [PATCH 08/19] ALSA: ymu831: add E-DSP driver Yoichi Yuasa
2013-01-16 8:35 ` [PATCH 09/19] ALSA: ymu831: add F-DSP driver Yoichi Yuasa
2013-01-16 8:36 ` [PATCH 10/19] ALSA: ymu831: add device control packet packing driver Yoichi Yuasa
2013-01-16 8:37 ` [PATCH 11/19] ALSA: ymu831: add data parser Yoichi Yuasa
2013-01-16 8:38 ` [PATCH 12/19] ALSA: ymu831: add resource control driver Yoichi Yuasa
2013-01-16 8:39 ` [PATCH 13/19] ALSA: yum831: add configurations header Yoichi Yuasa
2013-01-16 8:40 ` [PATCH 14/19] ALSA: ymu831: add codec control definitions Yoichi Yuasa
2013-01-16 8:41 ` [PATCH 15/19] ALSA: ymu831: add path configurations header Yoichi Yuasa
2013-01-16 8:42 ` [PATCH 16/19] ALSA: ymu831: add volume map header Yoichi Yuasa
2013-01-16 8:43 ` [PATCH 17/19] ALSA: ymu831: add codec driver Yoichi Yuasa
2013-01-16 14:16 ` Mark Brown
2013-01-16 8:44 ` [PATCH 18/19] ALSA: ymu831: add hwdep ioctl Yoichi Yuasa
2013-01-16 11:53 ` Takashi Iwai
2013-01-16 13:53 ` Mark Brown
2013-01-16 8:46 ` Yoichi Yuasa [this message]
2013-01-16 13:48 ` [PATCH 19/19] ALSA: SoC Audio support for OMAP4 boards with Yamaha YMU831 codec Mark Brown
2013-01-16 11:38 ` [PATCH 01/19] ALSA: add Yamaha YMU831 codec support Takashi Iwai
2013-01-16 11:42 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130116174601.1427658dd0091efa61fc7f74@linux-mips.org \
--to=yuasa@linux-mips.org \
--cc=alsa-devel@alsa-project.org \
--cc=patch@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).